Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/sound/microchip,sama7g5-i2smcc.yaml b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
new file mode 100644
index 0000000..651f61c
--- /dev/null
+++ b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I2S Multi-Channel Controller
+
+maintainers:
+ - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+ The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
+ supports a Time Division Multiplexed (TDM) interface with external
+ multi-channel audio codecs. It consists of a receiver, a transmitter and a
+ common clock generator that can be enabled separately to provide Adapter,
+ Client or Controller modes with receiver and/or transmitter active.
+ On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
+ multi-channel is supported by using multiple data pins, output and
+ input, without TDM.
+
+properties:
+ "#sound-dai-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - microchip,sam9x60-i2smcc
+ - microchip,sama7g5-i2smcc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Peripheral Bus Clock
+ - description: Generic Clock (Optional). Should be set mostly when Master
+ Mode is required.
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: gclk
+ minItems: 1
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ microchip,tdm-data-pair:
+ description:
+ Represents the DIN/DOUT pair pins that are used to receive/send
+ TDM data. It is optional and it is only needed if the controller
+ uses the TDM mode.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1, 2, 3]
+ default: 0
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ const: microchip,sam9x60-i2smcc
+ then:
+ properties:
+ microchip,tdm-data-pair: false
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2s@f001c000 {
+ #sound-dai-cells = <0>;
+ compatible = "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s_clk>, <&i2s_gclk>;
+ clock-names = "pclk", "gclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_default>;
+ };