Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/sound/davinci-evm-audio.txt b/Bindings/sound/davinci-evm-audio.txt
new file mode 100644
index 0000000..963e100
--- /dev/null
+++ b/Bindings/sound/davinci-evm-audio.txt
@@ -0,0 +1,49 @@
+* Texas Instruments SoC audio setups with TLV320AIC3X Codec
+
+Required properties:
+- compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx
+- ti,model : The user-visible name of this sound complex.
+- ti,audio-codec : The phandle of the TLV320AIC3x audio codec
+- ti,mcasp-controller : The phandle of the McASP controller
+- ti,audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources and
+ sinks are the codec's pins, and the jacks on the board:
+
+Optional properties:
+- ti,codec-clock-rate : The Codec Clock rate (in Hz) applied to the Codec.
+- clocks : Reference to the master clock
+- clock-names : The clock should be named "mclk"
+- Either codec-clock-rate or the codec-clock reference has to be defined. If
+ the both are defined the driver attempts to set referenced clock to the
+ defined rate and takes the rate from the clock reference.
+
+ Board connectors:
+
+ * Headphone Jack
+ * Line Out
+ * Mic Jack
+ * Line In
+
+
+Example:
+
+sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "DA830 EVM";
+ ti,audio-codec = <&tlv320aic3x>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Bias 2V",
+ "MIC3R", "Mic Bias 2V",
+ "Mic Bias 2V", "Mic Jack",
+ "LINE1L", "Line In",
+ "LINE2L", "Line In",
+ "LINE1R", "Line In",
+ "LINE2R", "Line In";
+};