Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/sound/cs4271.txt b/Bindings/sound/cs4271.txt
new file mode 100644
index 0000000..6e699ce
--- /dev/null
+++ b/Bindings/sound/cs4271.txt
@@ -0,0 +1,57 @@
+Cirrus Logic CS4271 DT bindings
+
+This driver supports both the I2C and the SPI bus.
+
+Required properties:
+
+ - compatible: "cirrus,cs4271"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the i2c address
+
+
+Optional properties:
+
+ - reset-gpio: a GPIO spec to define which pin is connected to the chip's
+ !RESET pin
+ - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag
+ is enabled.
+ - cirrus,enable-soft-reset:
+ The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+ line is de-asserted. That also means that clocks cannot be changed
+ without putting the chip back into hardware reset, which also requires
+ a complete re-initialization of all registers.
+
+ One (undocumented) workaround is to assert and de-assert the PDN bit
+ in the MODE2 register. This workaround can be enabled with this DT
+ property.
+
+ Note that this is not needed in case the clocks are stable
+ throughout the entire runtime of the codec.
+
+ - vd-supply: Digital power
+ - vl-supply: Logic power
+ - va-supply: Analog Power
+
+Examples:
+
+ codec_i2c: cs4271@10 {
+ compatible = "cirrus,cs4271";
+ reg = <0x10>;
+ reset-gpio = <&gpio 23 0>;
+ vd-supply = <&vdd_3v3_reg>;
+ vl-supply = <&vdd_3v3_reg>;
+ va-supply = <&vdd_3v3_reg>;
+ };
+
+ codec_spi: cs4271@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0x0>;
+ reset-gpio = <&gpio 23 0>;
+ spi-max-frequency = <6000000>;
+ };
+