Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/regulator/ti,tps62360.yaml b/Bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 0000000..90c3927
--- /dev/null
+++ b/Bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6236x Voltage Regulators
+
+maintainers:
+ - Laxman Dewangan <ldewangan@nvidia.com>
+
+description: |
+ The TPS6236x are a family of step down dc-dc converter with
+ an input voltage range of 2.5V to 5.5V. The devices provide
+ up to 3A peak load current, and an output voltage range of
+ 0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
+
+ Datasheet is available at:
+ https://www.ti.com/lit/gpn/tps62360
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,tps62360
+ - ti,tps62361
+ - ti,tps62362
+ - ti,tps62363
+
+ reg:
+ maxItems: 1
+
+ ti,vsel0-gpio:
+ description: |
+ GPIO for controlling VSEL0 line. If this property
+ is missing, then assume that there is no GPIO for
+ VSEL0 control.
+ maxItems: 1
+
+ ti,vsel1-gpio:
+ description: |
+ GPIO for controlling VSEL1 line. If this property
+ is missing, then assume that there is no GPIO for
+ VSEL1 control.
+ maxItems: 1
+
+ ti,enable-vout-discharge:
+ description: Enable output discharge.
+ type: boolean
+
+ ti,enable-pull-down:
+ description: Enable pull down.
+ type: boolean
+
+ ti,vsel0-state-high:
+ description: |
+ Initial state of VSEL0 input is high. If this property
+ is missing, then assume the state as low.
+ type: boolean
+
+ ti,vsel1-state-high:
+ description: |
+ Initial state of VSEL1 input is high. If this property
+ is missing, then assume the state as low.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@60 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-pull-down;
+ ti,enable-vout-discharge;
+ };
+ };
+
+...