diff --git a/Bindings/ptp/brcm,ptp-dte.txt b/Bindings/ptp/brcm,ptp-dte.txt
new file mode 100644
index 0000000..6b1075e
--- /dev/null
+++ b/Bindings/ptp/brcm,ptp-dte.txt
@@ -0,0 +1,19 @@
+* Broadcom Digital Timing Engine(DTE) based PTP clock
+
+Required properties:
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
+- reg: address and length of the DTE block's NCO registers
+
+Example:
+
+ptp: ptp-dte@180af650 {
+	compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
+	reg = <0x180af650 0x10>;
+};
diff --git a/Bindings/ptp/ptp-idt82p33.yaml b/Bindings/ptp/ptp-idt82p33.yaml
new file mode 100644
index 0000000..51381e4
--- /dev/null
+++ b/Bindings/ptp/ptp-idt82p33.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 82P33 PTP Clock
+
+description: |
+  IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock
+
+maintainers:
+  - Min Li <min.li.xe@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,82p33810
+      - idt,82p33813
+      - idt,82p33814
+      - idt,82p33831
+      - idt,82p33910
+      - idt,82p33913
+      - idt,82p33914
+      - idt,82p33931
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@51 {
+            compatible = "idt,82p33810";
+            reg = <0x51>;
+        };
+    };
diff --git a/Bindings/ptp/ptp-idtcm.yaml b/Bindings/ptp/ptp-idtcm.yaml
new file mode 100644
index 0000000..7cf3266
--- /dev/null
+++ b/Bindings/ptp/ptp-idtcm.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idtcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT ClockMatrix (TM) PTP Clock
+
+maintainers:
+  - Vincent Cheng <vincent.cheng.xh@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      # For System Synchronizer
+      - idt,8a34000
+      - idt,8a34001
+      - idt,8a34002
+      - idt,8a34003
+      - idt,8a34004
+      - idt,8a34005
+      - idt,8a34006
+      - idt,8a34007
+      - idt,8a34008
+      - idt,8a34009
+      # For Port Synchronizer
+      - idt,8a34010
+      - idt,8a34011
+      - idt,8a34012
+      - idt,8a34013
+      - idt,8a34014
+      - idt,8a34015
+      - idt,8a34016
+      - idt,8a34017
+      - idt,8a34018
+      - idt,8a34019
+      # For Universal Frequency Translator (UFT)
+      - idt,8a34040
+      - idt,8a34041
+      - idt,8a34042
+      - idt,8a34043
+      - idt,8a34044
+      - idt,8a34045
+      - idt,8a34046
+      - idt,8a34047
+      - idt,8a34048
+      - idt,8a34049
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@5b {
+            compatible = "idt,8a34000";
+            reg = <0x5b>;
+        };
+    };
diff --git a/Bindings/ptp/ptp-ines.txt b/Bindings/ptp/ptp-ines.txt
new file mode 100644
index 0000000..4c242bd
--- /dev/null
+++ b/Bindings/ptp/ptp-ines.txt
@@ -0,0 +1,35 @@
+ZHAW InES PTP time stamping IP core
+
+The IP core needs two different kinds of nodes.  The control node
+lives somewhere in the memory map and specifies the address of the
+control registers.  There can be up to three port handles placed as
+attributes of PHY nodes.  These associate a particular MII bus with a
+port index within the IP core.
+
+Required properties of the control node:
+
+- compatible:		"ines,ptp-ctrl"
+- reg:			physical address and size of the register bank
+
+Required format of the port handle within the PHY node:
+
+- timestamper:		provides control node reference and
+			the port channel within the IP core
+
+Example:
+
+	tstamper: timestamper@60000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x60000000 0x80>;
+	};
+
+	ethernet@80000000 {
+		...
+		mdio {
+			...
+			ethernet-phy@3 {
+				...
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
diff --git a/Bindings/ptp/ptp-qoriq.txt b/Bindings/ptp/ptp-qoriq.txt
new file mode 100644
index 0000000..743eda7
--- /dev/null
+++ b/Bindings/ptp/ptp-qoriq.txt
@@ -0,0 +1,87 @@
+* Freescale QorIQ 1588 timer based PTP clock
+
+General Properties:
+
+  - compatible   Should be "fsl,etsec-ptp" for eTSEC
+                 Should be "fsl,fman-ptp-timer" for DPAA FMan
+                 Should be "fsl,dpaa2-ptp" for DPAA2
+                 Should be "fsl,enetc-ptp" for ENETC
+  - reg          Offset and length of the register set for the device
+  - interrupts   There should be at least two interrupts. Some devices
+                 have as many as four PTP related interrupts.
+
+Clock Properties:
+
+  - fsl,cksel        Timer reference clock source.
+  - fsl,tclk-period  Timer reference clock period in nanoseconds.
+  - fsl,tmr-prsc     Prescaler, divides the output clock.
+  - fsl,tmr-add      Frequency compensation value.
+  - fsl,tmr-fiper1   Fixed interval period pulse generator.
+  - fsl,tmr-fiper2   Fixed interval period pulse generator.
+  - fsl,tmr-fiper3   Fixed interval period pulse generator.
+                     Supported only on DPAA2 and ENETC hardware.
+  - fsl,max-adj      Maximum frequency adjustment in parts per billion.
+  - fsl,extts-fifo   The presence of this property indicates hardware
+		     support for the external trigger stamp FIFO.
+  - little-endian    The presence of this property indicates the 1588 timer
+		     IP block is little-endian mode. The default endian mode
+		     is big-endian.
+
+  These properties set the operational parameters for the PTP
+  clock. You must choose these carefully for the clock to work right.
+  Here is how to figure good values:
+
+  TimerOsc     = selected reference clock   MHz
+  tclk_period  = desired clock period       nanoseconds
+  NominalFreq  = 1000 / tclk_period         MHz
+  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+  tmr_add      = ceil(2^32 / FreqDivRatio)
+  OutputClock  = NominalFreq / tmr_prsc     MHz
+  PulseWidth   = 1 / OutputClock            microseconds
+  FiperFreq1   = desired frequency in Hz
+  FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+  tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+  max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+  The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+  driver expects that tmr_fiper1 will be correctly set to produce a 1
+  Pulse Per Second (PPS) signal, since this will be offered to the PPS
+  subsystem to synchronize the Linux clock.
+
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  For eTSEC,
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  For DPAA FMan,
+  <0> - external high precision timer reference clock (TMR_1588_CLK)
+  <1> - MAC system clock (1/2 FMan clock)
+  <2> - reserved
+  <3> - RTC clock oscillator
+
+  When this attribute is not used, the IEEE 1588 timer reference clock
+  will use the eTSEC system clock (for Gianfar) or the MAC system
+  clock (for DPAA).
+
+Example:
+
+	ptp_clock@24e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0x24E00 0xB0>;
+		interrupts = <12 0x8 13 0x8>;
+		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
+		fsl,tclk-period = <10>;
+		fsl,tmr-prsc    = <100>;
+		fsl,tmr-add     = <0x999999A4>;
+		fsl,tmr-fiper1  = <0x3B9AC9F6>;
+		fsl,tmr-fiper2  = <0x00018696>;
+		fsl,max-adj     = <659999998>;
+	};
diff --git a/Bindings/ptp/timestamper.txt b/Bindings/ptp/timestamper.txt
new file mode 100644
index 0000000..fc550ce
--- /dev/null
+++ b/Bindings/ptp/timestamper.txt
@@ -0,0 +1,42 @@
+Time stamps from MII bus snooping devices
+
+This binding supports non-PHY devices that snoop the MII bus and
+provide time stamps.  In contrast to PHY time stamping drivers (which
+can simply attach their interface directly to the PHY instance), stand
+alone MII time stamping drivers use this binding to specify the
+connection between the snooping device and a given network interface.
+
+Non-PHY MII time stamping drivers typically talk to the control
+interface over another bus like I2C, SPI, UART, or via a memory mapped
+peripheral.  This controller device is associated with one or more
+time stamping channels, each of which snoops on a MII bus.
+
+The "timestamper" property lives in a phy node and links a time
+stamping channel from the controller device to that phy's MII bus.
+
+Example:
+
+	tstamper: timestamper@10000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x10000000 0x80>;
+	};
+
+	ethernet@20000000 {
+		mdio {
+			ethernet-phy@1 {
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
+
+	ethernet@30000000 {
+		mdio {
+			ethernet-phy@2 {
+				timestamper = <&tstamper 1>;
+			};
+		};
+	};
+
+In this example, time stamps from the MII bus attached to phy@1 will
+appear on time stamp channel 0 (zero), and those from phy@2 appear on
+channel 1.