diff --git a/Bindings/power/supply/active-semi,act8945a-charger.yaml b/Bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 0000000..5220d9c
--- /dev/null
+++ b/Bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: active-semi,act8945a-charger
+
+  interrupts:
+    maxItems: 1
+
+  active-semi,chglev-gpios:
+    maxItems: 1
+    description: charge current level GPIO
+
+  active-semi,lbo-gpios:
+    maxItems: 1
+    description: low battery voltage detect GPIO
+
+  active-semi,input-voltage-threshold-microvolt:
+    description: |
+      Specifies the charger's input over-voltage threshold value.
+      Despite the name, specified values are in millivolt (mV).
+      Defaults to 6.6 V
+    enum: [ 6600, 7000, 7500, 8000 ]
+
+  active-semi,precondition-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's PRECONDITION safety timer setting value in minutes.
+      If 0, it means to disable this timer.
+      Defaults to 40 minutes.
+    enum: [ 0, 40, 60, 80 ]
+
+  active-semi,total-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's total safety timer setting value in hours;
+      If 0, it means to disable this timer;
+      Defaults to 3 hours.
+    enum: [ 0, 3, 4, 5 ]
+
+required:
+  - compatible
+  - interrupts
+  - active-semi,chglev-gpios
+  - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "active-semi,act8945a-charger";
+        interrupt-parent = <&pioA>;
+        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+        active-semi,input-voltage-threshold-microvolt = <6600>;
+        active-semi,precondition-timeout = <40>;
+        active-semi,total-timeout = <3>;
+      };
+    };
diff --git a/Bindings/power/supply/adc-battery.yaml b/Bindings/power/supply/adc-battery.yaml
new file mode 100644
index 0000000..ed9702c
--- /dev/null
+++ b/Bindings/power/supply/adc-battery.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  Basic battery capacity meter, which only reports basic battery data
+  via ADC channels and optionally indicate that the battery is full by
+  polling a GPIO line.
+
+  The voltage is expected to be measured between the battery terminals
+  and mandatory. The optional current/power channel is expected to
+  monitor the current/power flowing out of the battery. Last but not
+  least the temperature channel is supposed to measure the battery
+  temperature.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: adc-battery
+
+  charged-gpios:
+    description:
+      GPIO which signals that the battery is fully charged. The GPIO is
+      often provided by charger ICs, that are not software controllable.
+    maxItems: 1
+
+  io-channels:
+    minItems: 1
+    maxItems: 4
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: voltage
+      - enum: [ current, power, temperature ]
+      - enum: [ power, temperature ]
+      - const: temperature
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    fuel-gauge {
+        compatible = "adc-battery";
+        charged-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+        io-channels = <&adc 13>, <&adc 37>;
+        io-channel-names = "voltage", "current";
+
+        power-supplies = <&charger>;
+        monitored-battery = <&battery>;
+    };
diff --git a/Bindings/power/supply/battery.yaml b/Bindings/power/supply/battery.yaml
new file mode 100644
index 0000000..491488e
--- /dev/null
+++ b/Bindings/power/supply/battery.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The devicetree battery node provides static battery characteristics.
+  In smart batteries, these are typically stored in non-volatile memory
+  on a fuel gauge chip. The battery node should be used where there is
+  no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+  Upstream dts files should not include battery nodes, unless the battery
+  represented cannot easily be replaced in the system by one of a
+  different type. This prevents unpredictable, potentially harmful,
+  behavior should a replacement that changes the battery type occur
+  without a corresponding update to the dtb.
+
+  Battery properties are named, where possible, for the corresponding elements
+  in enum power_supply_property, defined in include/linux/power_supply.h
+
+  Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+  The phandle's property should be named "monitored-battery".
+
+properties:
+  compatible:
+    const: simple-battery
+
+  device-chemistry:
+    description: This describes the chemical technology of the battery.
+    oneOf:
+      - const: nickel-cadmium
+      - const: nickel-metal-hydride
+      - const: lithium-ion
+        description: This is a blanket type for all lithium-ion batteries,
+          including those below. If possible, a precise compatible string
+          from below should be used, but sometimes it is unknown which specific
+          lithium ion battery is employed and this wide compatible can be used.
+      - const: lithium-ion-polymer
+      - const: lithium-ion-iron-phosphate
+      - const: lithium-ion-manganese-oxide
+
+  over-voltage-threshold-microvolt:
+    description: battery over-voltage limit
+
+  re-charge-voltage-microvolt:
+    description: limit to automatically start charging again
+
+  voltage-min-design-microvolt:
+    description: drained battery voltage
+
+  voltage-max-design-microvolt:
+    description: fully charged battery voltage
+
+  energy-full-design-microwatt-hours:
+    description: battery design energy
+
+  charge-full-design-microamp-hours:
+    description: battery design capacity
+
+  trickle-charge-current-microamp:
+    description: current for trickle-charge phase
+
+  precharge-current-microamp:
+    description: current for pre-charge phase
+
+  precharge-upper-limit-microvolt:
+    description: limit when to change to constant charging
+
+  charge-term-current-microamp:
+    description: current for charge termination phase
+
+  constant-charge-current-max-microamp:
+    description: maximum constant input current
+
+  constant-charge-voltage-max-microvolt:
+    description: maximum constant input voltage
+
+  factory-internal-resistance-micro-ohms:
+    description: battery factory internal resistance
+
+  resistance-temp-table:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: the temperature in degree Celsius
+        - description: battery internal resistance percent
+    description: |
+      A table providing the temperature in degree Celsius
+      and corresponding battery internal resistance percent, which is used to
+      look up the resistance percent according to current temperature to get an
+      accurate batterty internal resistance in different temperatures.
+
+  ocv-capacity-celsius:
+    description: |
+      An array containing the temperature in degree Celsius,
+      for each of the battery capacity lookup table.
+
+  operating-range-celsius:
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
+required:
+  - compatible
+
+patternProperties:
+  '^ocv-capacity-table-[0-9]+$':
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      An array providing the open circuit voltage (OCV)
+      of the battery and corresponding battery capacity percent, which is used
+      to look up battery capacity according to current OCV value. And the open
+      circuit voltage unit is microvolt.
+    maxItems: 100
+    items:
+      items:
+        - description: open circuit voltage (OCV) in microvolts
+        - description: battery capacity percent
+          maximum: 100
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "simple-battery";
+        over-voltage-threshold-microvolt = <4500000>;
+        re-charge-voltage-microvolt = <250000>;
+        voltage-min-design-microvolt = <3200000>;
+        voltage-max-design-microvolt = <4200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+        precharge-current-microamp = <256000>;
+        precharge-upper-limit-microvolt = <2500000>;
+        charge-term-current-microamp = <128000>;
+        constant-charge-current-max-microamp = <900000>;
+        constant-charge-voltage-max-microvolt = <4200000>;
+        factory-internal-resistance-micro-ohms = <250000>;
+        ocv-capacity-celsius = <(-10) 0 10>;
+        /* table for -10 degree Celsius */
+        ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+        /* table for 0 degree Celsius */
+        ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+        /* table for 10 degree Celsius */
+        ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+        resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+
+      fuel-gauge@22 {
+        reg = <0x22>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Bindings/power/supply/bq2415x.yaml b/Bindings/power/supply/bq2415x.yaml
new file mode 100644
index 0000000..1382234
--- /dev/null
+++ b/Bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2415x Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24150
+      - ti,bq24150a
+      - ti,bq24151
+      - ti,bq24151a
+      - ti,bq24152
+      - ti,bq24153
+      - ti,bq24153a
+      - ti,bq24155
+      - ti,bq24156
+      - ti,bq24156a
+      - ti,bq24158
+
+  reg:
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: initial maximum current charger can pull from power supply in mA.
+
+  ti,weak-battery-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      weak battery voltage threshold in mV.
+      The chip will use slow precharge if battery voltage is below this value.
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in mV.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in mA.
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase drops
+      below this value (in mA).
+
+  ti,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: value of sensing resistor in milliohm.
+
+  ti,usb-charger-detection:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to usb charger detection device (required for auto mode)
+
+required:
+  - compatible
+  - reg
+  - ti,current-limit
+  - ti,weak-battery-voltage
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq24150a";
+        reg = <0x6b>;
+
+        ti,current-limit = <100>;
+        ti,weak-battery-voltage = <3400>;
+        ti,battery-regulation-voltage = <4200>;
+        ti,charge-current = <650>;
+        ti,termination-current = <100>;
+        ti,resistor-sense = <68>;
+
+        ti,usb-charger-detection = <&isp1704>;
+      };
+    };
diff --git a/Bindings/power/supply/bq24190.yaml b/Bindings/power/supply/bq24190.yaml
new file mode 100644
index 0000000..d3ebc9d
--- /dev/null
+++ b/Bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24190
+      - ti,bq24192
+      - ti,bq24192i
+      - ti,bq24196
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      Regulator that is used to control the VBUS voltage direction for
+      either USB host mode or for charging on the OTG port
+
+  ti,system-minimum-microvolt:
+    description: |
+      when power is connected and the battery is below minimum system voltage,
+      the system will be regulated above this setting.
+
+  omit-battery-class:
+    type: boolean
+    description: |
+      If this property is set, the operating system does not try to create a
+      battery device.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - precharge-current-microamp: maximum charge current during precharge phase
+                                    (typically 20% of battery capacity).
+      - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+                                      above recharge threshold, and the current is below this
+                                      setting (typically 10% of battery capacity).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bat: battery {
+      compatible = "simple-battery";
+      precharge-current-microamp = <256000>;
+      charge-term-current-microamp = <128000>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24190";
+        reg = <0x6a>;
+        interrupt-parent = <&gpiochip>;
+        interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+        monitored-battery = <&bat>;
+        ti,system-minimum-microvolt = <3200000>;
+
+        usb_otg_vbus: usb-otg-vbus { };
+      };
+    };
diff --git a/Bindings/power/supply/bq24257.yaml b/Bindings/power/supply/bq24257.yaml
new file mode 100644
index 0000000..eb064bb
--- /dev/null
+++ b/Bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24250
+      - ti,bq24251
+      - ti,bq24257
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in uV
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in uA
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  pg-gpios:
+    description: |
+      GPIO used for connecting the bq2425x device PG (Power Good) pin.
+      This pin is not available on all devices however it should be used if
+      possible as this is the recommended way to obtain the charger's input PG
+      state. If this pin is not specified a software-based approach for PG
+      detection is used.
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The maximum current to be drawn from the charger's input (in uA).
+      If this property is not specified, the input limit current is set
+      automatically using USB D+/D- signal based charger type detection.
+      If the hardware does not support the D+/D- based detection, a default
+      of 500,000 is used (=500mA) instead.
+
+  ti,ovp-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the over voltage protection voltage (in uV).
+      If not specified a default of 6,5000,000 (=6.5V) is used.
+
+  ti,in-dpm-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the threshold input voltage for the dynamic power path management (in uV).
+      If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24257";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+      };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24250";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <500000>;
+        ti,termination-current = <50000>;
+        ti,current-limit = <900000>;
+        ti,ovp-voltage = <9500000>;
+        ti,in-dpm-voltage = <4440000>;
+      };
+    };
diff --git a/Bindings/power/supply/bq24735.yaml b/Bindings/power/supply/bq24735.yaml
new file mode 100644
index 0000000..af41e7c
--- /dev/null
+++ b/Bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq24735
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: AC adapter plug event interrupt
+    maxItems: 1
+
+  ti,ac-detect-gpios:
+    maxItems: 1
+    description: |
+      This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+      that is configured as an input and connected to the ACOK pin on the bq24735.
+      Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+      absence despite ACOK being active (high) on AC adapter presence.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging current.
+      This value must be between 128mA and 8.128A with a 64mA step resolution.
+      The POR value is 0x0000h. This number is in mA (e.g. 8192).
+      See spec for more information about the ChargeCurrent (0x14h) register.
+
+  ti,charge-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging voltage.
+      This value must be between 1.024V and 19.2V with a 16mV step resolution.
+      The POR value is 0x0000h. This number is in mV (e.g. 19200).
+      See spec for more information about the ChargeVoltage (0x15h) register.
+
+  ti,input-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charger input current.
+      This value must be between 128mA and 8.064A with a 128mA step resolution.
+      The POR value is 0x1000h. This number is in mA (e.g. 8064).
+      See the spec for more information about the InputCurrent (0x3fh) register.
+
+  ti,external-control:
+    type: boolean
+    description: |
+      Indicates that the charger is configured externally and that the host should not
+      attempt to enable/disable charging or set the charge voltage/current.
+
+  poll-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@9 {
+        compatible = "ti,bq24735";
+        reg = <0x9>;
+        ti,ac-detect-gpios = <&gpio 72 0x1>;
+      };
+    };
diff --git a/Bindings/power/supply/bq2515x.yaml b/Bindings/power/supply/bq2515x.yaml
new file mode 100644
index 0000000..845822c
--- /dev/null
+++ b/Bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ2515x family is a highly integrated battery charge management IC that
+  integrates the most common functions for wearable devices, namely a charger,
+  an output voltage rail, ADC for battery and system monitoring, and
+  push-button controller.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/bq25150.pdf
+    http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25150
+      - ti,bq25155
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  ac-detect-gpios:
+    description: |
+       GPIO used for connecting the bq2515x device PG (AC Detect)
+       pin.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO used for low power mode of IC.
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  input-current-limit-microamp:
+    description: Maximum input current in micro Amps.
+    minimum: 50000
+    maximum: 500000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <50000>;
+      precharge-current-microamp = <2500>;
+      constant-charge-voltage-max-microvolt = <4000000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25150: charger@6b {
+        compatible = "ti,bq25150";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+        input-current-limit-microamp = <100000>;
+
+        ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+        powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+        charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Bindings/power/supply/bq256xx.yaml b/Bindings/power/supply/bq256xx.yaml
new file mode 100644
index 0000000..a76afe3
--- /dev/null
+++ b/Bindings/power/supply/bq256xx.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq256xx Switch Mode Buck Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The bq256xx devices are a family of highly-integrated battery charge
+  management and system power management ICs for single cell Li-ion and Li-
+  polymer batteries.
+
+  Datasheets:
+    - https://www.ti.com/lit/ds/symlink/bq25600.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25618.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25619.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25600
+      - ti,bq25601
+      - ti,bq25600d
+      - ti,bq25601d
+      - ti,bq25611d
+      - ti,bq25618
+      - ti,bq25619
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    default: 0
+    description: |
+      Watchdog timer in ms. 0 (default) disables the watchdog
+    minimum: 0
+    maximum: 160000
+    enum: [ 0, 40000, 80000, 160000]
+
+  input-voltage-limit-microvolt:
+    description: |
+       Minimum input voltage limit in µV with a 100000 µV step
+    minimum: 3900000
+    maximum: 5400000
+
+  input-current-limit-microamp:
+    description: |
+       Maximum input current limit in µA with a 100000 µA step
+    minimum: 100000
+    maximum: 3200000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Interrupt sends an active low, 256 μs pulse to host to report the charger
+      device status and faults.
+
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <2040000>;
+      constant-charge-voltage-max-microvolt = <4352000>;
+      precharge-current-microamp = <180000>;
+      charge-term-current-microamp = <180000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+
+      clock-frequency = <400000>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq25601";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+        ti,watchdog-timeout-ms = <40000>;
+
+        input-voltage-limit-microvolt = <4500000>;
+        input-current-limit-microamp = <2400000>;
+       };
+    };
+...
diff --git a/Bindings/power/supply/bq25890.yaml b/Bindings/power/supply/bq25890.yaml
new file mode 100644
index 0000000..0ad302a
--- /dev/null
+++ b/Bindings/power/supply/bq25890.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,bq25890
+      - items:
+          - enum:
+              - ti,bq25892
+              - ti,bq25895
+              - ti,bq25896
+          - const: ti,bq25890
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage (in uV)
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current (in uA)
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  ti,precharge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charge current during precharge phase (in uA)
+
+  ti,minimum-sys-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      when battery is charging and it is below minimum system voltage,
+      the system will be regulated above minimum-sys-voltage setting (in uV)
+
+  ti,boost-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: VBUS voltage level in boost mode (in uV)
+
+  ti,boost-max-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum allowed current draw in boost mode (in uA)
+
+  ti,boost-low-freq:
+    description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+    type: boolean
+
+  ti,use-ilim-pin:
+    description: |
+      ILIM resistor will be used and the input current will be the lower
+      between the resistor setting and the IINLIM register setting
+    type: boolean
+
+  ti,thermal-regulation-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      temperature above which the charge current is lowered, to avoid overheating
+      (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+  ti,ibatcomp-micro-ohms:
+    description: value of a resistor in series with the battery (in Micro Ohms)
+
+  ti,ibatcomp-clamp-microvolt:
+    description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,precharge-current
+  - ti,minimum-sys-voltage
+  - ti,boost-voltage
+  - ti,boost-max-current
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+      };
+    };
diff --git a/Bindings/power/supply/bq25980.yaml b/Bindings/power/supply/bq25980.yaml
new file mode 100644
index 0000000..b70ce8d
--- /dev/null
+++ b/Bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timeout-ms = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...
diff --git a/Bindings/power/supply/bq27xxx.yaml b/Bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 0000000..309ea33
--- /dev/null
+++ b/Bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Andrew F. Davis <afd@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Support various Texas Instruments fuel gauge devices that share similar
+  register maps and power supply properties
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq27200
+      - ti,bq27210
+      - ti,bq27500 # deprecated, use revision specific property below
+      - ti,bq27510 # deprecated, use revision specific property below
+      - ti,bq27520 # deprecated, use revision specific property below
+      - ti,bq27500-1
+      - ti,bq27510g1
+      - ti,bq27510g2
+      - ti,bq27510g3
+      - ti,bq27520g1
+      - ti,bq27520g2
+      - ti,bq27520g3
+      - ti,bq27520g4
+      - ti,bq27521
+      - ti,bq27530
+      - ti,bq27531
+      - ti,bq27541
+      - ti,bq27542
+      - ti,bq27546
+      - ti,bq27742
+      - ti,bq27545
+      - ti,bq27411
+      - ti,bq27421
+      - ti,bq27425
+      - ti,bq27426
+      - ti,bq27441
+      - ti,bq27621
+      - ti,bq27z561
+      - ti,bq28z610
+      - ti,bq34z100
+      - ti,bq78z100
+
+  reg:
+    maxItems: 1
+    description: integer, I2C address of the fuel gauge.
+
+  monitored-battery:
+    description: |
+       The fuel gauge uses the following battery properties:
+       - energy-full-design-microwatt-hours
+       - charge-full-design-microamp-hours
+       - voltage-min-design-microvolt
+       Both or neither of the *-full-design-*-hours properties must be set.
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      voltage-min-design-microvolt = <3200000>;
+      energy-full-design-microwatt-hours = <5290000>;
+      charge-full-design-microamp-hours = <1430000>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq27510g3: fuel-gauge@55 {
+        compatible = "ti,bq27510g3";
+        reg = <0x55>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Bindings/power/supply/charger-manager.yaml b/Bindings/power/supply/charger-manager.yaml
new file mode 100644
index 0000000..5af1e0b
--- /dev/null
+++ b/Bindings/power/supply/charger-manager.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Binding for the legacy charger manager driver.
+  Please do not use for new products.
+
+properties:
+  compatible:
+    const: charger-manager
+
+  cm-chargers:
+    description: name of chargers
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  cm-num-chargers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+  cm-fuel-gauge:
+    description: name of battery fuel gauge
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-name:
+    description: name of the charger manager
+    default: battery
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-poll-mode:
+    description: polling mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    enum:
+      - 0 # disabled
+      - 1 # always
+      - 2 # when external power is connected
+      - 3 # when charging
+
+  cm-poll-interval:
+    description: polling interval (in ms)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-stat:
+    description: battery status
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # battery always present
+      - 1 # no battery
+      - 2 # check presence via fuel gauge
+      - 3 # check presence via charger
+
+  cm-fullbatt-vchkdrop-volt:
+    description: voltage drop before restarting charging in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-vchkdrop-ms:
+    deprecated: true
+
+  cm-fullbatt-voltage:
+    description: voltage of full battery in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-soc:
+    description: state of charge to consider as full battery in %
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-capacity:
+    description: capcity to consider as full battery in uAh
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-thermal-zone:
+    description: name of external thermometer's thermal zone
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-discharging-max:
+    description: limits of discharging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-charging-max:
+    description: limits of charging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold:
+    description: critical cold temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold-in-minus:
+    description: if set cm-battery-cold temperature is in minus degrees
+    type: boolean
+
+  cm-battery-hot:
+    description: critical hot temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-temp-diff:
+    description: temperature difference to allow recharging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "-supply$":
+    description: regulator consumer, named according to cm-regulator-name
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "^regulator[@-][0-9]$":
+    type: object
+    properties:
+      cm-regulator-name:
+        description: name of charger regulator
+        $ref: /schemas/types.yaml#/definitions/string
+
+    required:
+      - cm-regulator-name
+
+    additionalProperties: false
+
+    patternProperties:
+      "^cable[@-][0-9]$":
+        type: object
+        properties:
+          cm-cable-name:
+            description: name of charger cable
+            enum:
+              - USB
+              - USB-HOST
+              - SDP
+              - DCP
+              - CDP
+              - ACA
+              - FAST-CHARGER
+              - SLOW-CHARGER
+              - WPT
+              - PD
+              - DOCK
+              - JIG
+              - MECHANICAL
+
+          cm-cable-extcon:
+            description: name of extcon dev
+            $ref: /schemas/types.yaml#/definitions/string
+
+          cm-cable-min:
+            description: minimum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          cm-cable-max:
+            description: maximum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - cm-cable-name
+          - cm-cable-extcon
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - cm-chargers
+  - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+  - |
+    charger-manager {
+        compatible = "charger-manager";
+        chg-reg-supply = <&charger_regulator>;
+
+        cm-name = "battery";
+        /* Always polling ON : 30s */
+        cm-poll-mode = <1>;
+        cm-poll-interval = <30000>;
+
+        cm-fullbatt-vchkdrop-volt = <150000>;
+        cm-fullbatt-soc = <100>;
+
+        cm-battery-stat = <3>;
+
+        cm-chargers = "charger0", "charger1", "charger2";
+
+        cm-fuel-gauge = "fuelgauge0";
+
+        cm-thermal-zone = "thermal_zone.1";
+        /* in deci centigrade */
+        cm-battery-cold = <50>;
+        cm-battery-cold-in-minus;
+        cm-battery-hot = <800>;
+        cm-battery-temp-diff = <100>;
+
+        /* Allow charging for 5hr */
+        cm-charging-max = <18000000>;
+        /* Allow discharging for 2hr */
+        cm-discharging-max = <7200000>;
+
+        regulator-0 {
+            cm-regulator-name = "chg-reg";
+            cable-0 {
+                cm-cable-name = "USB";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <475000>;
+                cm-cable-max = <500000>;
+            };
+            cable-1 {
+                cm-cable-name = "SDP";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <650000>;
+                cm-cable-max = <675000>;
+            };
+        };
+    };
diff --git a/Bindings/power/supply/cpcap-battery.yaml b/Bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 0000000..694bfdb
--- /dev/null
+++ b/Bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery fuel gauge
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,cpcap-battery
+
+  interrupts:
+    items:
+      - description: eol interrupt
+      - description: low battery percentage interrupt
+      - description: critical battery percentage interrupt
+      - description: charger detect interrupt
+      - description: battery detect interrupt
+      - description: coulomb counter calibration interrupt
+
+  interrupt-names:
+    items:
+      - const: eol
+      - const: lowbph
+      - const: lowbpl
+      - const: chrgcurr1
+      - const: battdetb
+      - const: cccal
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: chg_isense
+      - const: batti
+
+  power-supplies: true
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - power-supplies
+
+additionalProperties: false
+
+examples:
+  - |
+    cpcap {
+      battery {
+        compatible = "motorola,cpcap-battery";
+        interrupts-extended =
+                <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+                <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+        interrupt-names =
+                "eol", "lowbph", "lowbpl",
+                "chrgcurr1", "battdetb", "cccal";
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 5>, <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "chg_isense", "batti";
+        power-supplies = <&cpcap_charger>;
+      };
+    };
diff --git a/Bindings/power/supply/cpcap-charger.yaml b/Bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 0000000..7e6bf30
--- /dev/null
+++ b/Bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery charger
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,mapphone-cpcap-charger
+
+  interrupts:
+    items:
+      - description: charger detection interrupt
+      - description: reverse charge interrupt
+      - description: SE1 charger detection interrupt
+      - description: SE0 charger detection interrupt
+      - description: reverse mode interrupt
+      - description: charge current 2 interrupt
+      - description: charge current 1 interrupt
+      - description: VBUS valid interrupt
+      - description: battery detect interrupt
+
+  interrupt-names:
+    items:
+      - const: chrg_det
+      - const: rvrs_chrg
+      - const: chrg_se1b
+      - const: se0conn
+      - const: rvrs_mode
+      - const: chrgcurr2
+      - const: chrgcurr1
+      - const: vbusvld
+      - const: battdetb
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: VBUS voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: vbus
+      - const: chg_isense
+      - const: batti
+
+  mode-gpios:
+    description: |
+      Optionally CPCAP charger can have a companion wireless
+      charge controller that is controlled with two GPIOs
+      that are active low.
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    cpcap {
+      charger {
+        compatible = "motorola,mapphone-cpcap-charger";
+        interrupts-extended =
+                <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+                <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+                <&cpcap 54 0>;
+        interrupt-names =
+                "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+                "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+                "battdetb";
+        mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+                     <&gpio3 23 GPIO_ACTIVE_LOW>;
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 2>, <&cpcap_adc 5>,
+                      <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "vbus", "chg_isense",
+                           "batti";
+      };
+    };
diff --git a/Bindings/power/supply/cw2015_battery.yaml b/Bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 0000000..dc697b6
--- /dev/null
+++ b/Bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+  - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+  The driver can utilize information from a simple-battery linked via a
+  phandle in monitored-battery. If specified the driver uses the
+  charge-full-design-microamp-hours property of the battery.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: cellwise,cw2015
+
+  reg:
+    maxItems: 1
+
+  cellwise,battery-profile:
+    description: |
+      This property specifies characteristics of the battery used. The format
+      of this binary blob is kept secret by CellWise. The only way to obtain
+      it is to mail two batteries to a test facility of CellWise and receive
+      back a test report with the binary blob.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 64
+    maxItems: 64
+
+  cellwise,monitor-interval-ms:
+    description:
+      Specifies the interval in milliseconds gauge values are polled at
+    minimum: 250
+
+  power-supplies:
+    minItems: 1
+    maxItems: 8 # Should be enough
+
+  monitored-battery:
+    description:
+      Specifies the phandle of a simple-battery connected to this gauge
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cw2015@62 {
+            compatible = "cellwise,cw2015";
+            reg = <0x62>;
+            cellwise,battery-profile = /bits/ 8 <
+                0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+                0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+                0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+                0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+                0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+                0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+                0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+                0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+           >;
+           cellwise,monitor-interval-ms = <5000>;
+           monitored-battery = <&bat>;
+           power-supplies = <&mains_charger>, <&usb_charger>;
+       };
+    };
diff --git a/Bindings/power/supply/dlg,da9150-charger.yaml b/Bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 0000000..85bebeb
--- /dev/null
+++ b/Bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Charger Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-charger
+
+  io-channels:
+    items:
+      - description: ADC channel for current
+      - description: ADC channel for bus voltage
+      - description: ADC channel for junction temperature
+      - description: ADC channel for battery voltage
+
+  io-channel-names:
+    items:
+      - const: CHAN_IBUS
+      - const: CHAN_VBUS
+      - const: CHAN_TJUNC
+      - const: CHAN_VBAT
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "dlg,da9150-charger";
+        io-channels = <&gpadc 0>,
+                      <&gpadc 2>,
+                      <&gpadc 8>,
+                      <&gpadc 5>;
+        io-channel-names = "CHAN_IBUS",
+                           "CHAN_VBUS",
+                           "CHAN_TJUNC",
+                           "CHAN_VBAT";
+      };
+    };
diff --git a/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 0000000..7cc94b8
--- /dev/null
+++ b/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-fuel-gauge
+
+  dlg,update-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Interval time (milliseconds) between battery level checks.
+
+  dlg,warn-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: Battery discharge level (%) where warning event raised.
+
+  dlg,crit-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: |
+      Battery discharge level (%) where critical event raised.
+      This value should be lower than the warning level.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      battery {
+        compatible = "dlg,da9150-fuel-gauge";
+        dlg,update-interval = <10000>;
+        dlg,warn-soc-level = /bits/ 8 <15>;
+        dlg,crit-soc-level = /bits/ 8 <5>;
+      };
+    };
diff --git a/Bindings/power/supply/gpio-charger.yaml b/Bindings/power/supply/gpio-charger.yaml
new file mode 100644
index 0000000..89f8e2b
--- /dev/null
+++ b/Bindings/power/supply/gpio-charger.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  This binding is for all chargers, which are working more or less
+  autonomously, only providing some status GPIOs and possibly some
+  GPIOs for limited control over the charging process.
+
+properties:
+  compatible:
+    const: gpio-charger
+
+  charger-type:
+    enum:
+      - unknown
+      - battery
+      - ups
+      - mains
+      - usb-sdp                   # USB standard downstream port
+      - usb-dcp                   # USB dedicated charging port
+      - usb-cdp                   # USB charging downstream port
+      - usb-aca                   # USB accessory charger adapter
+    description:
+      Type of the charger, e.g. "mains" for a wall charger.
+
+  gpios:
+    maxItems: 1
+    description: GPIO indicating the charger presence
+
+  charge-status-gpios:
+    maxItems: 1
+    description: GPIO indicating the charging status
+
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - gpios
+  - required:
+      - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    charger {
+      compatible = "gpio-charger";
+      charger-type = "usb-sdp";
+
+      gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+      charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
+    };
diff --git a/Bindings/power/supply/ingenic,battery.yaml b/Bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 0000000..741022b
--- /dev/null
+++ b/Bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx battery
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+$ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+          - enum:
+              - ingenic,jz4725b-battery
+              - ingenic,jz4770-battery
+          - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };
diff --git a/Bindings/power/supply/isp1704.yaml b/Bindings/power/supply/isp1704.yaml
new file mode 100644
index 0000000..fb3a812
--- /dev/null
+++ b/Bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1704 USB Charger Detection
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nxp,isp1704
+
+  nxp,enable-gpio:
+    maxItems: 1
+    description: GPIO connected to the chip's enable pin
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: USB PHY the ISP1704 is connected to
+
+required:
+  - compatible
+  - nxp,enable-gpio
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger-detect {
+      compatible = "nxp,isp1704";
+      nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+      usb-phy = <&usb2_phy>;
+    };
diff --git a/Bindings/power/supply/lego,ev3-battery.yaml b/Bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 0000000..a99d989
--- /dev/null
+++ b/Bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+  It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+  detected by a key switch in the battery compartment.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: lego,ev3-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for battery voltage
+      - description: ADC channel for battery current
+
+  io-channel-names:
+    items:
+      - const: voltage
+      - const: current
+
+  rechargeable-gpios:
+    maxItems: 1
+    description: Rechargeable battery indication gpio
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    battery {
+      compatible = "lego,ev3-battery";
+      io-channels = <&adc 4>, <&adc 3>;
+      io-channel-names = "voltage", "current";
+      rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Bindings/power/supply/lltc,lt3651-charger.yaml b/Bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 0000000..d26ed5e
--- /dev/null
+++ b/Bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3651 Charger Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,lt3651-charger
+      - lltc,ltc3651-charger  # deprecated, use lltc,lt3651-charger
+
+  lltc,acpr-gpios:
+    maxItems: 1
+
+  lltc,fault-gpios:
+    maxItems: 1
+
+  lltc,chrg-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "lltc,lt3651-charger";
+      lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+      lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+      lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Bindings/power/supply/lltc,ltc294x.yaml b/Bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 0000000..e68a97c
--- /dev/null
+++ b/Bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+  All chips measure battery capacity.
+  The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+  temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+  are software compatible, uses a slightly different conversion formula
+  for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2941
+      - lltc,ltc2942
+      - lltc,ltc2943
+      - lltc,ltc2944
+
+  reg:
+    maxItems: 1
+
+  lltc,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: |
+      Sense resistor value in milli-ohms.
+      Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+  lltc,prescaler-exponent:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The prescaler exponent as explained in the datasheet.
+      This determines the range and accuracy of the gauge.
+      The value is programmed into the chip only if it differs from the current setting.
+      The setting is lost when the battery is disconnected.
+
+required:
+  - compatible
+  - reg
+  - lltc,resistor-sense
+  - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      battery@64 {
+        compatible = "lltc,ltc2943";
+        reg = <0x64>;
+        lltc,resistor-sense = <15>;
+        lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+      };
+    };
diff --git a/Bindings/power/supply/ltc4162-l.yaml b/Bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 0000000..29d5365
--- /dev/null
+++ b/Bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+  battery charger and PowerPath (TM) manager that seamlessly manages power
+  distribution between input sources such as wall adapters, backplanes, solar
+  panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+  Specifications about the charger can be found at:
+    https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4162-l
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  lltc,rsnsb-micro-ohms:
+    description: Battery sense resistor in microohm.
+    minimum: 1000
+
+  lltc,rsnsi-micro-ohms:
+    description: Input current sense resistor in microohm.
+    minimum: 1000
+
+  lltc,cell-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of battery cells. If not provided, will be obtained from the chip
+      once the external power is applied. Omit this when the number of cells
+      is somewhat dynamic. Without it, several measurements will return 0 until
+      the charger is connected to an external supply.
+
+required:
+  - compatible
+  - reg
+  - lltc,rsnsb-micro-ohms
+  - lltc,rsnsi-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      charger: battery-charger@68 {
+              compatible = "lltc,ltc4162-l";
+              reg = <0x68>;
+              lltc,rsnsb-micro-ohms = <10000>;
+              lltc,rsnsi-micro-ohms = <16000>;
+              lltc,cell-count = <2>;
+      };
+    };
diff --git a/Bindings/power/supply/max77650-charger.yaml b/Bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 0000000..62eeddb
--- /dev/null
+++ b/Bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+  compatible:
+    const: maxim,max77650-charger
+
+  input-voltage-min-microvolt:
+    description:
+      Minimum CHGIN regulation voltage.
+    enum: [ 4000000, 4100000, 4200000, 4300000,
+            4400000, 4500000, 4600000, 4700000 ]
+
+  input-current-limit-microamp:
+    description:
+      CHGIN input current limit (in microamps).
+    enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+  - compatible
+additionalProperties: false
+
+...
diff --git a/Bindings/power/supply/maxim,ds2760.yaml b/Bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 0000000..5faa241
--- /dev/null
+++ b/Bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim DS2760
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The ds2760 is a w1 slave device and must hence have its sub-node in
+  DT under a w1 bus master node.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,ds2760
+
+  maxim,pmod-enabled:
+    description: |
+      Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+      and leave sleep Mode when the DQ line goes high.
+    type: boolean
+
+  maxim,cache-time-ms:
+    description: |
+      Time im milliseconds to cache the data for.
+      When this time expires, the values are read again from the hardware.
+      Defaults to 1000.
+
+  rated-capacity-microamp-hours:
+    description: |
+      The rated capacity of the battery, in mAh.
+      If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Bindings/power/supply/maxim,max14577.yaml b/Bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 0000000..4d3a1d0
--- /dev/null
+++ b/Bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
diff --git a/Bindings/power/supply/maxim,max14656.yaml b/Bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 0000000..b444b79
--- /dev/null
+++ b/Bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14656
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max14656
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger-detector@35 {
+        compatible = "maxim,max14656";
+        reg = <0x35>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Bindings/power/supply/maxim,max17040.yaml b/Bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 0000000..377cbb2
--- /dev/null
+++ b/Bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17040
+      - maxim,max17041
+      - maxim,max17043
+      - maxim,max17044
+      - maxim,max17048
+      - maxim,max17049
+      - maxim,max17058
+      - maxim,max17059
+      - maxim,max77836-battery
+
+  reg:
+    maxItems: 1
+
+  maxim,alert-low-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description: |
+      The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+      If skipped the power up default value of 4 (%) will be used.
+
+  maxim,double-soc:
+    type: boolean
+    description: |
+      Certain devices return double the capacity.
+      Specify this to divide the reported value in 2 and thus normalize it.
+      SoC == State of Charge == Capacity.
+
+  maxim,rcomp:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      A value to compensate readings for various battery chemistries and operating temperatures.
+      max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+      All other devices have one byte rcomp, default to 0x97.
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: battery temperature
+
+  io-channel-names:
+    items:
+      - const: temp
+
+  wakeup-source:
+    type: boolean
+    description: |
+      Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17048";
+        reg = <0x36>;
+        maxim,rcomp = /bits/ 8 <0x56>;
+        maxim,alert-low-soc-level = <10>;
+        maxim,double-soc;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max77836-battery";
+        reg = <0x36>;
+        maxim,alert-low-soc-level = <10>;
+        interrupt-parent = <&gpio7>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fuel-gauge@36 {
+        compatible = "maxim,max17043";
+        reg = <0x36>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <144 IRQ_TYPE_EDGE_FALLING>;
+
+        monitored-battery = <&battery>;
+        power-supplies = <&charger>;
+
+        io-channels = <&adc 8>;
+        io-channel-names = "temp";
+
+        maxim,alert-low-soc-level = <10>;
+        wakeup-source;
+      };
+    };
diff --git a/Bindings/power/supply/maxim,max17042.yaml b/Bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 0000000..085e250
--- /dev/null
+++ b/Bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17042
+      - maxim,max17047
+      - maxim,max17050
+      - maxim,max17055
+      - maxim,max77849-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The ALRT pin, an open-drain interrupt.
+
+  maxim,rsns-microohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+      Defining this property enables current-sense functionality.
+
+  maxim,cold-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as cold (in tenths of degree Celsius).
+      Default is not to report cold events.
+
+  maxim,over-heat-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+      Default is not to report over heating events.
+
+  maxim,dead-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as dead (in mV).
+      Default is not to report dead battery events.
+
+  maxim,over-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as over voltage (in mV).
+      Default is not to report over-voltage events.
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17042";
+        reg = <0x36>;
+        maxim,rsns-microohm = <10000>;
+        maxim,over-heat-temp = <600>;
+        maxim,over-volt = <4300>;
+      };
+    };
diff --git a/Bindings/power/supply/maxim,max77693.yaml b/Bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 0000000..f5fd53d
--- /dev/null
+++ b/Bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/power/supply/maxim,max77976.yaml b/Bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 0000000..f23dcc5
--- /dev/null
+++ b/Bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+  configured via I2C.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max77976
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "maxim,max77976";
+        reg = <0x6b>;
+      };
+    };
+
+...
diff --git a/Bindings/power/supply/maxim,max8903.yaml b/Bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 0000000..a8d625f
--- /dev/null
+++ b/Bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8903
+
+  dok-gpios:
+    maxItems: 1
+    description: Valid DC power has been detected (active low, input)
+
+  uok-gpios:
+    maxItems: 1
+    description: Valid USB power has been detected (active low, input)
+
+  cen-gpios:
+    maxItems: 1
+    description: Charge enable pin (active low, output)
+
+  chg-gpios:
+    maxItems: 1
+    description: Charger status pin (active low, input)
+
+  flt-gpios:
+    maxItems: 1
+    description: Fault pin (active low, output)
+
+  dcm-gpios:
+    maxItems: 1
+    description: Current limit mode setting (DC=1 or USB=0, output)
+
+  usus-gpios:
+    maxItems: 1
+    description: USB suspend pin (active high, output)
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dok-gpios
+  - required:
+      - uok-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "maxim,max8903";
+      dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+      flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+      chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+      cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Bindings/power/supply/mediatek,mt6370-charger.yaml b/Bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 0000000..fd491c5
--- /dev/null
+++ b/Bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-charger
+
+  interrupts:
+    description: |
+      Specify what irqs are needed to be handled by MT6370 Charger driver.
+      We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+      is plugged in, and then the driver will enable BC1.2 detection.
+      After the hardware of MT6370 completes the BC1.2 detection,
+      IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+      the result of BC1.2 detection.
+      When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+      hardware enters the "Minimum Input Voltage Regulation loop" and
+      a workaround needs to be applied at this time.
+      In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+      "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+    items:
+      - description: irq of "USB is plugged in"
+      - description: irq of "BC1.2 is done"
+      - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+  interrupt-names:
+    items:
+      - const: uvp_d_evt
+      - const: attach_i
+      - const: mivr
+
+  io-channels:
+    description: |
+      Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+    minItems: 1
+    items:
+      - description: |
+          VBUS voltage with lower accuracy (+-75mV) but higher measure
+          range (1~22V)
+      - description: |
+          VBUS voltage with higher accuracy (+-30mV) but lower measure
+          range (1~9.76V)
+      - description: the main system input voltage
+      - description: battery voltage
+      - description: battery temperature-sense input voltage
+      - description: IBUS current (required)
+      - description: battery current
+      - description: |
+          regulated output voltage to supply for the PWM low-side gate driver
+          and the bootstrap capacitor
+      - description: IC junction temperature
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: vbusdiv5
+      - const: vbusdiv2
+      - const: vsys
+      - const: vbat
+      - const: ts_bat
+      - const: ibus
+      - const: ibat
+      - const: chg_vddp
+      - const: temp_jc
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Bindings/power/supply/microchip,ucs1002.yaml b/Bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 0000000..b9bd159
--- /dev/null
+++ b/Bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: microchip,ucs1002
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: a_det
+          - const: alert
+      - const: a_det
+      - const: alert
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@32 {
+            compatible = "microchip,ucs1002";
+            reg = <0x32>;
+            interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+                                  <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "a_det", "alert";
+       };
+    };
diff --git a/Bindings/power/supply/mitsumi,mm8013.yaml b/Bindings/power/supply/mitsumi,mm8013.yaml
new file mode 100644
index 0000000..6865640
--- /dev/null
+++ b/Bindings/power/supply/mitsumi,mm8013.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mitsumi,mm8013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsumi MM8013 fuel gauge
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: mitsumi,mm8013
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fuel-gauge@55 {
+        compatible = "mitsumi,mm8013";
+        reg = <0x55>;
+      };
+    };
diff --git a/Bindings/power/supply/mt6360_charger.yaml b/Bindings/power/supply/mt6360_charger.yaml
new file mode 100644
index 0000000..4c74cc7
--- /dev/null
+++ b/Bindings/power/supply/mt6360_charger.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6360-chg
+
+  richtek,vinovp-microvolt:
+    description: Maximum CHGIN regulation voltage in uV.
+    enum: [ 5500000, 6500000, 11000000, 14500000 ]
+
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6360_charger: charger {
+      compatible = "mediatek,mt6360-chg";
+      richtek,vinovp-microvolt = <14500000>;
+
+      otg_vbus_regulator: usb-otg-vbus-regulator {
+        regulator-name = "usb-otg-vbus";
+        regulator-min-microvolt = <4425000>;
+        regulator-max-microvolt = <5825000>;
+      };
+    };
+...
diff --git a/Bindings/power/supply/nokia,n900-battery.yaml b/Bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 0000000..5178e62
--- /dev/null
+++ b/Bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia N900 battery
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nokia,n900-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for temperature reading
+      - description: ADC channel for battery size identification
+      - description: ADC channel to measure the battery voltage
+
+  io-channel-names:
+    items:
+      - const: temp
+      - const: bsi
+      - const: vbat
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    battery {
+      compatible = "nokia,n900-battery";
+      io-channels = <&twl4030_madc 0>,
+                    <&twl4030_madc 4>,
+                    <&twl4030_madc 12>;
+      io-channel-names = "temp",
+                         "bsi",
+                         "vbat";
+    };
diff --git a/Bindings/power/supply/olpc-battery.yaml b/Bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 0000000..dd89e25
--- /dev/null
+++ b/Bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC Battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: olpc,xo1.5-battery
+          - const: olpc,xo1-battery
+      - items:
+          - const: olpc,xo1-battery
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/power/supply/power-supply.yaml b/Bindings/power/supply/power-supply.yaml
new file mode 100644
index 0000000..4e54c93
--- /dev/null
+++ b/Bindings/power/supply/power-supply.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Supply Core Support
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  power-supplies:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      This property is added to a supply in order to list the devices which
+      supply it power, referenced by their phandles.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The battery (with "simple-battery" compatible) being monitored by this
+      power supply.
+
+additionalProperties: true
diff --git a/Bindings/power/supply/qcom,pm8916-bms-vm.yaml b/Bindings/power/supply/qcom,pm8916-bms-vm.yaml
new file mode 100644
index 0000000..ad764e6
--- /dev/null
+++ b/Bindings/power/supply/qcom,pm8916-bms-vm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-bms-vm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Voltage Mode BMS
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description:
+  Voltage Mode BMS is a hardware block found in some Qualcomm PMICs
+  such as pm8916. This block performs battery voltage monitoring.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: qcom,pm8916-bms-vm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: BMS FSM left S3 mode
+      - description: BMS FSM entered S2 mode
+      - description: OCV measured in S3 mode
+      - description: OCV below threshold
+      - description: FIFO update done
+      - description: BMS FSM switched state
+
+  interrupt-names:
+    items:
+      - const: cv_leave
+      - const: cv_enter
+      - const: ocv_good
+      - const: ocv_thr
+      - const: fifo
+      - const: state_chg
+
+  monitored-battery: true
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@4000 {
+        compatible = "qcom,pm8916-bms-vm";
+        reg = <0x4000>;
+        interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+                     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+                     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+                     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+                     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+                     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "cv_leave",
+                          "cv_enter",
+                          "ocv_good",
+                          "ocv_thr",
+                          "fifo",
+                          "state_chg";
+
+        monitored-battery = <&battery>;
+        power-supplies = <&pm8916_charger>;
+      };
+    };
diff --git a/Bindings/power/supply/qcom,pm8916-lbc.yaml b/Bindings/power/supply/qcom,pm8916-lbc.yaml
new file mode 100644
index 0000000..cdf14e5
--- /dev/null
+++ b/Bindings/power/supply/qcom,pm8916-lbc.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-lbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Linear Battery Charger
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description:
+  Linear Battery Charger hardware block, found in some Qualcomm PMICs
+  such as pm8916. Implements a simple, autonomous CC/CV charger.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: qcom,pm8916-lbc
+
+  reg:
+    items:
+      - description: Charger
+      - description: Battery
+      - description: USB
+      - description: MISC
+
+  reg-names:
+    items:
+      - const: chgr
+      - const: bat_if
+      - const: usb
+      - const: misc
+
+  interrupts:
+    items:
+      - description: Battery detection
+      - description: Fast charging
+      - description: Charging failed
+      - description: Charging done
+      - description: Battery present
+      - description: Battery temperature OK
+      - description: USB coarse detection
+      - description: USB IN valid
+      - description: Charger gone
+      - description: Overtemperature
+
+  interrupt-names:
+    items:
+      - const: vbat_det
+      - const: fast_chg
+      - const: chg_fail
+      - const: chg_done
+      - const: bat_pres
+      - const: temp_ok
+      - const: coarse_det
+      - const: usb_vbus
+      - const: chg_gone
+      - const: overtemp
+
+  qcom,fast-charge-safe-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4775000
+    description:
+      Maximum safe battery voltage in uV; May be pre-set by bootloader,
+      in which case, setting this will harmlessly fail.
+
+  qcom,fast-charge-safe-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 90000
+    maximum: 1440000
+    description:
+      Maximum safe battery charge current in uA; May be pre-set by
+      bootloader, in which case setting this will harmlessly fail.
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,fast-charge-safe-voltage
+  - qcom,fast-charge-safe-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@1000 {
+        compatible = "qcom,pm8916-lbc";
+        reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+        reg-names = "chgr", "bat_if", "usb", "misc";
+
+        interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "vbat_det",
+                          "fast_chg",
+                          "chg_fail",
+                          "chg_done",
+                          "bat_pres",
+                          "temp_ok",
+                          "coarse_det",
+                          "usb_vbus",
+                          "chg_gone",
+                          "overtemp";
+        monitored-battery = <&battery>;
+
+        qcom,fast-charge-safe-current = <900000>;
+        qcom,fast-charge-safe-voltage = <4300000>;
+      };
+    };
diff --git a/Bindings/power/supply/qcom,pm8941-charger.yaml b/Bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 0000000..cbac55d
--- /dev/null
+++ b/Bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8226-charger
+      - qcom,pm8941-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: charge done
+      - description: charge fast mode
+      - description: charge trickle mode
+      - description: battery temperature ok
+      - description: battery present
+      - description: charger disconnected
+      - description: USB-in valid
+      - description: DC-in valid
+
+  interrupt-names:
+    items:
+      - const: chg-done
+      - const: chg-fast
+      - const: chg-trkl
+      - const: bat-temp-ok
+      - const: bat-present
+      - const: chg-gone
+      - const: usb-valid
+      - const: dc-valid
+
+  qcom,fast-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+  qcom,fast-charge-low-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2100000
+    maximum: 3600000
+    description: |
+      Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+      Below this value linear or switch-mode auto-trickle-charging will operate.
+
+  qcom,fast-charge-high-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+      The fast charger will attempt to charge the battery to this voltage.
+      May be clamped to safety limits.
+
+  qcom,fast-charge-safe-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+      be clamped by this value. Defaults to 4.2V.
+
+  qcom,fast-charge-safe-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: |
+      Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+      will be clamped by this value. Defaults to 1A.
+
+  qcom,auto-recharge-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which auto-recharge functionality will restart charging
+      after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+      Defaults to 4.1V.
+
+  qcom,minimum-input-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4200000
+    maximum: 9600000
+    description: |
+      Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+  qcom,dc-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default DC charge current limit in uA. Defaults to 100mA.
+
+  qcom,disable-dc:
+    type: boolean
+    description: Disable DC charger
+
+  qcom,jeita-extended-temp-range:
+    type: boolean
+    description: |
+      Enable JEITA extended temperature range;  This does *not* adjust the maximum charge
+      voltage or current in the extended temperature range. It only allows charging when
+      the battery is in the extended temperature range. Voltage/current regulation must
+      be done externally to fully comply with the JEITA safety guidelines if this flag
+      is set.
+
+  usb-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default USB charge current limit in uA.
+
+  usb-otg-in-supply:
+    description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+  otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      This node defines a regulator used to control the direction of VBUS voltage.
+      Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+      or allow input voltage from external VBUS for charging. In the hardware, the supply for
+      this regulator comes from usb_otg_in-supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@1000 {
+        compatible = "qcom,pm8941-charger";
+        reg = <0x1000>;
+        interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "chg-done",
+                          "chg-fast",
+                          "chg-trkl",
+                          "bat-temp-ok",
+                          "bat-present",
+                          "chg-gone",
+                          "usb-valid",
+                          "dc-valid";
+        qcom,fast-charge-current-limit = <1000000>;
+        qcom,dc-current-limit = <1000000>;
+        usb-otg-in-supply = <&pm8941_5vs1>;
+
+        otg-vbus {};
+      };
+    };
diff --git a/Bindings/power/supply/qcom,pm8941-coincell.yaml b/Bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 0000000..1d2405b
--- /dev/null
+++ b/Bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+  The hardware block controls charging for a coincell or capacitor that is
+  used to provide power backup for certain features of the power management
+  IC (PMIC)
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm8998-coincell
+          - const: qcom,pm8941-coincell
+
+      - const: qcom,pm8941-coincell
+
+  reg:
+    maxItems: 1
+
+  qcom,rset-ohms:
+    description: |
+      Resistance (in ohms) for current-limiting resistor. If unspecified,
+      inherit the previous configuration (e.g. from bootloader or hardware
+      default value).
+    enum: [ 800, 1200, 1700, 2100 ]
+
+  qcom,vset-millivolts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage (in millivolts) to apply for charging. If unspecified, inherit
+      the previous configuration (e.g. from bootloader or hardware default
+      value).
+    enum: [ 2500, 3000, 3100, 3200 ]
+
+  qcom,charger-disable:
+    type: boolean
+    description: defining this property disables charging
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@2800 {
+        compatible = "qcom,pm8941-coincell";
+        reg = <0x2800>;
+        qcom,rset-ohms = <2100>;
+        qcom,vset-millivolts = <3000>;
+      };
+    };
diff --git a/Bindings/power/supply/qcom,pmi8998-charger.yaml b/Bindings/power/supply/qcom,pmi8998-charger.yaml
new file mode 100644
index 0000000..277c47e
--- /dev/null
+++ b/Bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-charger
+      - qcom,pm660-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: usb-plugin
+      - const: bat-ov
+      - const: wdog-bark
+      - const: usbin-icl-change
+
+  io-channels:
+    items:
+      - description: USB in current in uA
+      - description: USB in voltage in uV
+
+  io-channel-names:
+    items:
+      - const: usbin_i
+      - const: usbin_v
+
+  monitored-battery:
+    description: phandle to the simple-battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <4>;
+
+      charger@1000 {
+        compatible = "qcom,pmi8998-charger";
+        reg = <0x1000>;
+
+        interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+                     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+        io-channels = <&pmi8998_rradc 3>,
+                      <&pmi8998_rradc 4>;
+        io-channel-names = "usbin_i",
+                           "usbin_v";
+
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Bindings/power/supply/richtek,rt5033-battery.yaml b/Bindings/power/supply/richtek,rt5033-battery.yaml
new file mode 100644
index 0000000..b5d8888
--- /dev/null
+++ b/Bindings/power/supply/richtek,rt5033-battery.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt5033-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
diff --git a/Bindings/power/supply/richtek,rt5033-charger.yaml b/Bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 0000000..5b3edd7
--- /dev/null
+++ b/Bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  The battery charger of the multifunction device RT5033 has to be instantiated
+  under sub-node named "charger" using the following format.
+
+properties:
+  compatible:
+    const: richtek,rt5033-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the monitored battery according to battery.yaml. The battery
+      node needs to contain five parameters.
+
+      precharge-current-microamp:
+      Current of pre-charge mode. The pre-charge current levels are 350 mA
+      to 650 mA programmed by I2C per 100 mA.
+
+      constant-charge-current-max-microamp:
+      Current of fast-charge mode. The fast-charge current levels are 700 mA
+      to 2000 mA programmed by I2C per 100 mA.
+
+      charge-term-current-microamp:
+      This property is end of charge current. Its level ranges from 150 mA
+      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+      600 mA in 100 mA steps.
+
+      precharge-upper-limit-microvolt:
+      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+      threshold voltage, the charger is in pre-charge mode with pre-charge
+      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+      constant-charge-voltage-max-microvolt:
+      Battery regulation voltage of constant voltage mode. This voltage levels
+      from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+  richtek,usb-connector:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a USB connector according to usb-connector.yaml. The connector
+      should be a child of the extcon device.
+
+required:
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    charger {
+        compatible = "richtek,rt5033-charger";
+        monitored-battery = <&battery>;
+        richtek,usb-connector = <&usb_con>;
+    };
diff --git a/Bindings/power/supply/richtek,rt9455.yaml b/Bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 0000000..07e38be
--- /dev/null
+++ b/Bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek rt9455 battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt9455
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  richtek,output-charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: output current from the charger to the battery, in uA.
+
+  richtek,end-of-charge-percentage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      percent of the output charge current. When the current in constant-voltage phase drops
+      below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+  richtek,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum battery voltage in uV.
+
+  richtek,boost-output-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+  richtek,min-input-voltage-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input voltage level in uV, used to decrease voltage level when the over current of the
+      input power source occurs. This prevents input voltage drop due to insufficient
+      current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+  richtek,avg-input-current-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input current value in uA drained by the charger from the power source.
+      Defaults to 500000 uA (500mA).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - richtek,output-charge-current
+  - richtek,end-of-charge-percentage
+  - richtek,battery-regulation-voltage
+  - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@22 {
+        compatible = "richtek,rt9455";
+        reg = <0x22>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+        richtek,output-charge-current	    = <500000>;
+        richtek,end-of-charge-percentage    = <10>;
+        richtek,battery-regulation-voltage  = <4200000>;
+        richtek,boost-output-voltage	    = <5050000>;
+
+        richtek,min-input-voltage-regulation = <4500000>;
+        richtek,avg-input-current-regulation = <500000>;
+      };
+    };
diff --git a/Bindings/power/supply/richtek,rt9467.yaml b/Bindings/power/supply/richtek,rt9467.yaml
new file mode 100644
index 0000000..3723717
--- /dev/null
+++ b/Bindings/power/supply/richtek,rt9467.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9467 Switching Battery Charger with Power Path Management
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+  portable applications. It integrates a synchronous PWM controller, power
+  MOSFETs, input current sensing and regulation, high-accuracy voltage
+  regulation, and charge termination. The charge current is regulated through
+  integrated sensing resistors.
+
+  The RT9467 also features USB On-The-Go (OTG) support. It also integrates
+  D+/D- pin for USB host/charging port detection.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
+
+properties:
+  compatible:
+    const: richtek,rt9467
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO is used to turn on and off charging.
+    maxItems: 1
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios: true
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@5b {
+        compatible = "richtek,rt9467";
+        reg = <0x5b>;
+        wakeup-source;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+
+        rt9467_otg_vbus: usb-otg-vbus-regulator {
+          regulator-name = "rt9467-usb-otg-vbus";
+          regulator-min-microvolt = <4425000>;
+          regulator-max-microvolt = <5825000>;
+          regulator-min-microamp = <500000>;
+          regulator-max-microamp = <3000000>;
+        };
+      };
+    };
diff --git a/Bindings/power/supply/richtek,rt9471.yaml b/Bindings/power/supply/richtek,rt9471.yaml
new file mode 100644
index 0000000..fbb54cf
--- /dev/null
+++ b/Bindings/power/supply/richtek,rt9471.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9471.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9471 3A Single Cell Switching Battery charger
+
+maintainers:
+  - Alina Yu <alina_yu@richtek.com>
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT9471 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+  portable applications. It supports USB BC1.2 port detection, current and
+  voltage regulations in both charging and boost mode.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT9471=RT9471D/DS9471D-02.pdf
+
+properties:
+  compatible:
+    const: richtek,rt9471
+
+  reg:
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus-regulator:
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@53 {
+        compatible = "richtek,rt9471";
+        reg = <0x53>;
+        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+        wakeup-source;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>;
+
+        usb-otg-vbus-regulator {
+          regulator-name = "usb-otg-vbus";
+          regulator-min-microvolt = <4850000>;
+          regulator-max-microvolt = <5300000>;
+          regulator-min-microamp = <500000>;
+          regulator-max-microamp = <1200000>;
+        };
+      };
+    };
diff --git a/Bindings/power/supply/rohm,bd99954.yaml b/Bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 0000000..b2c229e
--- /dev/null
+++ b/Bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+  - Markus Laine <markus.laine@fi.rohmeurope.com>
+  - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+$ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: rohm,bd99954
+#
+#    The battery charging profile of BD99954.
+#
+#    Curve (1) represents charging current.
+#    Curve (2) represents battery voltage.
+#
+#    The BD99954 data sheet divides charging to three phases.
+#    a) Trickle-charge with constant current (8).
+#    b) pre-charge with constant current (6)
+#    c) fast-charge with:
+#       First a constant current (5) phase (CC)
+#       Then constant voltage (CV) phase (after the battery voltage has reached
+#       target level - until charging current has dropped to termination
+#       level (7)
+#
+#     V ^                                                        ^ I
+#       .                                                        .
+#       .                                                        .
+# (4)- -.- - - - - - - - - - - - - -  +++++++++++++++++++++++++++.
+#       .                            /                           .
+#       .                     ++++++/++ - - - - - - - - - - - - -.- - (5)
+#       .                     +    /  +                          .
+#       .                     +   -   --                         .
+#       .                     +  -     +                         .
+#       .                     +.-      -:                        .
+#       .                    .+         +`                       .
+#       .                  .- +       | `/                       .
+#       .               .."   +          .:                      .
+#       .             -"      +           --                     .
+#       .    (2)  ..."        +       |    :-                    .
+#       .    ...""            +             -:                   .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+#       .             +                       `:.                .
+#       .             +               |         -:               .
+#       .             +                           -:             .
+#       .             +                             ..           .
+#       .   (1)       +               |               "+++- - - -.- - (7)
+#       -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+#       .                                                +       -
+#       -------------------------------------------------+++++++++-->
+#       |             |       |   CC   |      CV         |
+#       | --trickle-- | -pre- | ---------fast----------- |
+#
+#   The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+#     Current used at trickle-charge phase (8 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - precharge-current-microamp:
+#     Current used at pre-charge phase (6 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-current-max-microamp
+#     Current used at fast charge constant current phase (5 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+#     The constant voltage used in fast charging phase (4 in above chart)
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - precharge-upper-limit-microvolt
+#     charging mode is changed from trickle charging to pre-charging
+#     when battery voltage exceeds this limit voltage (3 in above chart)
+#     minimum: 2048000
+#     maximum: 19200000
+#     multipleOf: 64000
+# - re-charge-voltage-microvolt
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+#     re-charging is automatically started when battry has been discharging
+#     to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+#     battery is expected to be faulty if battery voltage exceeds this limit.
+#     Charger will then enter to a "battery faulty" -state
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - charge-term-current-microamp
+#     minimum: 0
+#     maximum: 1024000
+#     multipleOf: 64000
+#     a charge cycle terminates when the battery voltage is above recharge
+#     threshold, and the current is below this setting (7 in above chart)
+#   See also Documentation/devicetree/bindings/power/supply/battery.yaml
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description:
+      phandle of battery characteristics devicetree node
+
+  rohm,vsys-regulation-microvolt:
+    description: system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,vbus-input-current-limit-microamp:
+    description: system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description: system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger@9 {
+            compatible = "rohm,bd99954";
+            monitored-battery = <&battery>;
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+        };
+    };
diff --git a/Bindings/power/supply/samsung,battery.yaml b/Bindings/power/supply/samsung,battery.yaml
new file mode 100644
index 0000000..40292d5
--- /dev/null
+++ b/Bindings/power/supply/samsung,battery.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SDI Batteries
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Samsung SDI (Samsung Digital Interface) batteries are all different versions
+  of lithium ion chemistry devices used for mobile phones, laptops and other
+  portable electronics. The batteries are adapted to a specific product and
+  the physical restrictions make it impossible to use another battery with the
+  product, so product device trees can specify these batteries. Operating
+  systems should determine hardware characteristics of the batteries from the
+  compatible string.
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,eb-l1m7flu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8190
+      - const: samsung,eb425161la
+        description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407
+      - const: samsung,eb425161lu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8160
+      - const: samsung,eb485159lu
+        description: 3.8V 1700 mAh battery used in Samsung GT-S7710
+      - const: samsung,eb535151vu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I9070
+      - const: samsung,eb585157lu
+        description: 3.8V 2000 mAh battery used in Samsung GT-I8530
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "samsung,eb425161la";
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Bindings/power/supply/sbs,sbs-battery.yaml b/Bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 0000000..90b9d3d
--- /dev/null
+++ b/Bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Battery compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,bq20z45
+              - ti,bq20z65
+              - ti,bq20z75
+          - enum:
+              - sbs,sbs-battery
+      - items:
+          - const: sbs,sbs-battery
+
+  reg:
+    maxItems: 1
+
+  sbs,i2c-retry-count:
+    description:
+      The number of times to retry I2C transactions on I2C IO failure.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,poll-retry-count:
+    description:
+      The number of times to try looking for new status after an external
+      change notification.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,battery-detect-gpios:
+    description:
+      GPIO which signals battery detection. If this is not supplied, the bus
+      needs to be polled to detect the battery.
+    maxItems: 1
+
+  sbs,disable-charger-broadcasts:
+    description:
+      SBS batteries by default send broadcast messages to SBS compliant chargers to
+      configure max. charge current/voltage. If your hardware does not have an SBS
+      compliant charger it should be disabled via this property to avoid blocking
+      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+      master implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        battery@b {
+            compatible = "ti,bq20z75", "sbs,sbs-battery";
+            reg = <0xb>;
+            sbs,i2c-retry-count = <2>;
+            sbs,poll-retry-count = <10>;
+            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+            sbs,disable-charger-broadcasts;
+       };
+    };
diff --git a/Bindings/power/supply/sbs,sbs-charger.yaml b/Bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 0000000..cb73ffa
--- /dev/null
+++ b/Bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Charger compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc4100
+          - enum:
+              - sbs,sbs-charger
+      - items:
+          - const: sbs,sbs-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@9 {
+            compatible = "lltc,ltc4100", "sbs,sbs-charger";
+            reg = <0x9>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+       };
+    };
diff --git a/Bindings/power/supply/sbs,sbs-manager.yaml b/Bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 0000000..2e21846
--- /dev/null
+++ b/Bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc1760
+          - enum:
+              - sbs,sbs-manager
+      - items:
+          - const: sbs,sbs-manager
+
+  reg:
+    const: 0xa
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^i2c@[1-4]$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 1
+        maximum: 4
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      batman: battery-manager@a {
+        compatible = "lltc,ltc1760", "sbs,sbs-manager";
+        reg = <0x0a>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        i2c@1 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <1>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 1 1>;
+          };
+        };
+
+        i2c@2 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <2>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 2 1>;
+          };
+        };
+
+        i2c@3 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <3>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 3 1>;
+          };
+        };
+      };
+    };
diff --git a/Bindings/power/supply/sc2731-charger.yaml b/Bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 0000000..a846a4d
--- /dev/null
+++ b/Bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMICs battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: sprd,sc2731-charger
+
+  reg:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description: phandle to the USB phy
+
+  monitored-battery:
+    description: |
+      The charger uses the following battery properties
+      - charge-term-current-microamp: current for charge termination phase.
+      - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      charge-term-current-microamp = <120000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-charger";
+        reg = <0x0>;
+        phys = <&ssphy>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Bindings/power/supply/sc27xx-fg.yaml b/Bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 0000000..de43e45
--- /dev/null
+++ b/Bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-fgu
+      - sprd,sc2721-fgu
+      - sprd,sc2723-fgu
+      - sprd,sc2730-fgu
+      - sprd,sc2731-fgu
+
+  reg:
+    maxItems: 1
+
+  battery-detect-gpios:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: Battery Temperature ADC
+      - description: Battery Charge Voltage ADC
+
+  io-channel-names:
+    items:
+      - const: bat-temp
+      - const: charge-vol
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration cells provided by eFuse device
+
+  nvmem-cell-names:
+    const: fgu_calib
+
+  sprd,calib-resistance-micro-ohms:
+    description: real resistance of coulomb counter chip in micro Ohms
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - reg
+  - battery-detect-gpios
+  - io-channels
+  - io-channel-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - sprd,calib-resistance-micro-ohms
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bat: battery {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <1900000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+      ocv-capacity-celsius = <20>;
+      ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+                             <4022000 85>, <3983000 80>, <3949000 75>,
+                             <3917000 70>, <3889000 65>, <3864000 60>,
+                             <3835000 55>, <3805000 50>, <3787000 45>,
+                             <3777000 40>, <3773000 35>, <3770000 30>,
+                             <3765000 25>, <3752000 20>, <3724000 15>,
+                             <3680000 10>, <3605000 5>, <3400000 0>;
+                             // ...
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-fgu";
+        reg = <0xa00>;
+        battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+        io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+        io-channel-names = "bat-temp", "charge-vol";
+        nvmem-cells = <&fgu_calib>;
+        nvmem-cell-names = "fgu_calib";
+        monitored-battery = <&bat>;
+        sprd,calib-resistance-micro-ohms = <21500>;
+      };
+    };
diff --git a/Bindings/power/supply/stericsson,ab8500-btemp.yaml b/Bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 0000000..525abdf
--- /dev/null
+++ b/Bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-btemp
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: BAT_CTRL_INDB
+      - const: BTEMP_LOW
+      - const: BTEMP_HIGH
+      - const: BTEMP_LOW_MEDIUM
+      - const: BTEMP_MEDIUM_HIGH
+
+  io-channels:
+    maxItems: 2
+
+  io-channel-names:
+    items:
+      - const: btemp_ball
+      - const: bat_ctrl
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      battery-temperature {
+        compatible = "stericsson,ab8500-btemp";
+        monitored-battery = <&battery>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+                     <80 IRQ_TYPE_LEVEL_HIGH>,
+                     <83 IRQ_TYPE_LEVEL_HIGH>,
+                     <81 IRQ_TYPE_LEVEL_HIGH>,
+                     <82 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "BAT_CTRL_INDB",
+                          "BTEMP_LOW",
+                          "BTEMP_HIGH",
+                          "BTEMP_LOW_MEDIUM",
+                          "BTEMP_MEDIUM_HIGH";
+        io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+        io-channel-names = "btemp_ball", "bat_ctrl";
+      };
+    };
diff --git a/Bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 0000000..10bbdcf
--- /dev/null
+++ b/Bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-chargalg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+required:
+  - compatible
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charging-algorithm {
+        compatible = "stericsson,ab8500-chargalg";
+        monitored-battery = <&ab8500_battery>;
+      };
+    };
diff --git a/Bindings/power/supply/stericsson,ab8500-charger.yaml b/Bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 0000000..e33329b
--- /dev/null
+++ b/Bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  vddadc-supply:
+    description: Supply for USB and Main charger
+
+  autopower_cfg:
+    type: boolean
+    description: automatic poweron after powerloss
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: MAIN_CH_UNPLUG_DET
+      - const: MAIN_CHARGE_PLUG_DET
+      - const: MAIN_EXT_CH_NOT_OK
+      - const: MAIN_CH_TH_PROT_R
+      - const: MAIN_CH_TH_PROT_F
+      - const: VBUS_DET_F
+      - const: VBUS_DET_R
+      - const: USB_LINK_STATUS
+      - const: USB_CH_TH_PROT_R
+      - const: USB_CH_TH_PROT_F
+      - const: USB_CHARGER_NOT_OKR
+      - const: VBUS_OVV
+      - const: CH_WD_EXP
+      - const: VBUS_CH_DROP_END
+
+  io-channels:
+    minItems: 2
+    maxItems: 4
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - const: main_charger_v
+          - const: main_charger_c
+          - const: vbus_v
+          - const: usb_charger_c
+      - items:
+          - const: vbus_v
+          - const: usb_charger_c
+
+
+required:
+  - compatible
+  - monitored-battery
+  - vddadc-supply
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "stericsson,ab8500-charger";
+        monitored-battery = <&battery>;
+        vddadc-supply = <&ab8500_ldo_tvout_reg>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+                     <11 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 IRQ_TYPE_LEVEL_HIGH>,
+                     <107 IRQ_TYPE_LEVEL_HIGH>,
+                     <106 IRQ_TYPE_LEVEL_HIGH>,
+                     <14 IRQ_TYPE_LEVEL_HIGH>,
+                     <15 IRQ_TYPE_LEVEL_HIGH>,
+                     <79 IRQ_TYPE_LEVEL_HIGH>,
+                     <105 IRQ_TYPE_LEVEL_HIGH>,
+                     <104 IRQ_TYPE_LEVEL_HIGH>,
+                     <89 IRQ_TYPE_LEVEL_HIGH>,
+                     <22 IRQ_TYPE_LEVEL_HIGH>,
+                     <21 IRQ_TYPE_LEVEL_HIGH>,
+                     <16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "MAIN_CH_UNPLUG_DET",
+                          "MAIN_CHARGE_PLUG_DET",
+                          "MAIN_EXT_CH_NOT_OK",
+                          "MAIN_CH_TH_PROT_R",
+                          "MAIN_CH_TH_PROT_F",
+                          "VBUS_DET_F",
+                          "VBUS_DET_R",
+                          "USB_LINK_STATUS",
+                          "USB_CH_TH_PROT_R",
+                          "USB_CH_TH_PROT_F",
+                          "USB_CHARGER_NOT_OKR",
+                          "VBUS_OVV",
+                          "CH_WD_EXP",
+                          "VBUS_CH_DROP_END";
+        io-channels = <&gpadc 0x03>,
+                      <&gpadc 0x0a>,
+                      <&gpadc 0x09>,
+                      <&gpadc 0x0b>;
+        io-channel-names = "main_charger_v",
+                           "main_charger_c",
+                           "vbus_v",
+                           "usb_charger_c";
+      };
+    };
diff --git a/Bindings/power/supply/stericsson,ab8500-fg.yaml b/Bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 0000000..6a724ca
--- /dev/null
+++ b/Bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-fg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  line-impedance-micro-ohms:
+    description: The line impedance between the battery and the
+      AB8500 inputs, to compensate for this when determining internal
+      resistance.
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: NCONV_ACCU
+      - const: BATT_OVV
+      - const: LOW_BAT_F
+      - const: CC_INT_CALIB
+      - const: CCEOC
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    items:
+      - const: main_bat_v
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      fuel-gauge {
+        compatible = "stericsson,ab8500-fg";
+        monitored-battery = <&battery>;
+        interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                     <8 IRQ_TYPE_LEVEL_HIGH>,
+                     <28 IRQ_TYPE_LEVEL_HIGH>,
+                     <27 IRQ_TYPE_LEVEL_HIGH>,
+                     <26 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "NCONV_ACCU",
+                          "BATT_OVV",
+                          "LOW_BAT_F",
+                          "CC_INT_CALIB",
+                          "CCEOC";
+        io-channels = <&gpadc 0x08>;
+        io-channel-names = "main_bat_v";
+      };
+    };
diff --git a/Bindings/power/supply/summit,smb347-charger.yaml b/Bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 0000000..2d552be
--- /dev/null
+++ b/Bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+  summit,inok-polarity:
+    description: |
+      Polarity of INOK signal indicating presence of external power supply.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+      - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+  usb-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    type: object
+
+    properties:
+      summit,needs-inok-toggle:
+        type: boolean
+        description: INOK signal is fixed and polarity needs to be toggled
+                     in order to enable/disable output mode.
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+
+            usb-vbus {
+                regulator-name = "usb_vbus";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                regulator-min-microamp = <750000>;
+                regulator-max-microamp = <750000>;
+                summit,needs-inok-toggle;
+            };
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };
diff --git a/Bindings/power/supply/ti,lp8727.yaml b/Bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 0000000..069422a
--- /dev/null
+++ b/Bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP8727 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,lp8727
+
+  reg:
+    const: 0x27
+
+  interrupts:
+    maxItems: 1
+
+  debounce-ms:
+    description: interrupt debounce time in ms
+
+patternProperties:
+  '^(ac|usb)$':
+    type: object
+    additionalProperties: false
+    description: USB/AC charging parameters
+    properties:
+      charger-type:
+        enum:
+          - ac
+          - usb
+
+      eoc-level:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 6
+        description: |
+          End of Charge Percentage with the following mapping:
+          0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+      charging-current:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 9
+        description: |
+          Charging current with the following mapping:
+          0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+          6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lp8727: charger@27 {
+        compatible = "ti,lp8727";
+        reg = <0x27>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+        debounce-ms = <300>;
+
+        /* AC charger: 5% EOC and 500mA charging current */
+        ac {
+          charger-type = "ac";
+          eoc-level = /bits/ 8 <0>;
+          charging-current = /bits/ 8 <4>;
+        };
+
+        /* USB charger: 10% EOC and 400mA charging current */
+        usb {
+          charger-type = "usb";
+          eoc-level = /bits/ 8 <1>;
+          charging-current = /bits/ 8 <2>;
+        };
+      };
+    };
diff --git a/Bindings/power/supply/tps65090-charger.yaml b/Bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 0000000..5867454
--- /dev/null
+++ b/Bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65090-charger
+
+  ti,enable-low-current-chrg:
+    type: boolean
+    description: |
+      Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65090-charger";
+        ti,enable-low-current-chrg;
+      };
+    };
diff --git a/Bindings/power/supply/tps65217-charger.yaml b/Bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 0000000..7ccf0cd
--- /dev/null
+++ b/Bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65217-charger
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: USB
+      - const: AC
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65217-charger";
+        interrupts = <0>, <1>;
+        interrupt-names = "USB", "AC";
+      };
+    };
diff --git a/Bindings/power/supply/twl4030-charger.yaml b/Bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 0000000..d8d3154
--- /dev/null
+++ b/Bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+  The battery charger needs to interact with the USB phy in order to know when
+  charging is permissible, and when there is a connection or disconnection.
+
+  The choice of phy cannot be configured at a hardware level, so there is no
+  value in explicit configuration in device-tree. Rather if there is a sibling
+  of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+  to determine when and how use USB power for charging.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,twl4030-bci
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  ti,bb-uvolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microvolts for charging the backup battery
+
+  ti,bb-uamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microamps for charging the backup battery
+
+  io-channels:
+    items:
+      - description: Accessory Charger Voltage Channel
+
+  io-channel-names:
+    items:
+      - const: vac
+
+  bci3v1-supply:
+    description: 3.1V USB regulator
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,twl4030-bci";
+        interrupts = <9>, <2>;
+        ti,bb-uvolt = <3200000>;
+        ti,bb-uamp = <150>;
+        io-channels = <&twl_madc 11>;
+        io-channel-names = "vac";
+      };
+    };
diff --git a/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 0000000..5c8369f
--- /dev/null
+++ b/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x AC power-supply
+
+description: |
+  The AXP20X can read the current current and voltage supplied by AC by
+  reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+  tell if an AC power supply is present and usable. AXP813/AXP803 are
+  able to limit current and supply voltage
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-ac-power-supply
+      - const: x-powers,axp221-ac-power-supply
+      - items:
+          - const: x-powers,axp803-ac-power-supply
+          - const: x-powers,axp813-ac-power-supply
+      - const: x-powers,axp813-ac-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 0000000..e0b95ec
--- /dev/null
+++ b/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x Battery power-supply
+
+description: |
+  The supported devices can read the battery voltage, charge and discharge
+  currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-battery-power-supply
+      - const: x-powers,axp209-battery-power-supply
+      - const: x-powers,axp221-battery-power-supply
+      - items:
+          - const: x-powers,axp803-battery-power-supply
+          - const: x-powers,axp813-battery-power-supply
+      - const: x-powers,axp813-battery-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 0000000..34b7959
--- /dev/null
+++ b/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x USB power-supply
+
+description: |
+  The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+  variations such as the former being able to set the VBUS power supply max
+  current to 100mA, unlike the latter.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp192-usb-power-supply
+          - x-powers,axp202-usb-power-supply
+          - x-powers,axp221-usb-power-supply
+          - x-powers,axp223-usb-power-supply
+          - x-powers,axp813-usb-power-supply
+      - items:
+          - const: x-powers,axp803-usb-power-supply
+          - const: x-powers,axp813-usb-power-supply
+
+
+required:
+  - compatible
+
+additionalProperties: false