Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/power/supply/qcom,pm8941-charger.yaml b/Bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 0000000..cbac55d
--- /dev/null
+++ b/Bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8226-charger
+ - qcom,pm8941-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: charge done
+ - description: charge fast mode
+ - description: charge trickle mode
+ - description: battery temperature ok
+ - description: battery present
+ - description: charger disconnected
+ - description: USB-in valid
+ - description: DC-in valid
+
+ interrupt-names:
+ items:
+ - const: chg-done
+ - const: chg-fast
+ - const: chg-trkl
+ - const: bat-temp-ok
+ - const: bat-present
+ - const: chg-gone
+ - const: usb-valid
+ - const: dc-valid
+
+ qcom,fast-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+ qcom,fast-charge-low-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2100000
+ maximum: 3600000
+ description: |
+ Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+ Below this value linear or switch-mode auto-trickle-charging will operate.
+
+ qcom,fast-charge-high-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+ The fast charger will attempt to charge the battery to this voltage.
+ May be clamped to safety limits.
+
+ qcom,fast-charge-safe-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+ be clamped by this value. Defaults to 4.2V.
+
+ qcom,fast-charge-safe-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: |
+ Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+ will be clamped by this value. Defaults to 1A.
+
+ qcom,auto-recharge-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which auto-recharge functionality will restart charging
+ after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+ Defaults to 4.1V.
+
+ qcom,minimum-input-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 4200000
+ maximum: 9600000
+ description: |
+ Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+ qcom,dc-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default DC charge current limit in uA. Defaults to 100mA.
+
+ qcom,disable-dc:
+ type: boolean
+ description: Disable DC charger
+
+ qcom,jeita-extended-temp-range:
+ type: boolean
+ description: |
+ Enable JEITA extended temperature range; This does *not* adjust the maximum charge
+ voltage or current in the extended temperature range. It only allows charging when
+ the battery is in the extended temperature range. Voltage/current regulation must
+ be done externally to fully comply with the JEITA safety guidelines if this flag
+ is set.
+
+ usb-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default USB charge current limit in uA.
+
+ usb-otg-in-supply:
+ description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+ otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ This node defines a regulator used to control the direction of VBUS voltage.
+ Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+ or allow input voltage from external VBUS for charging. In the hardware, the supply for
+ this regulator comes from usb_otg_in-supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ qcom,fast-charge-current-limit = <1000000>;
+ qcom,dc-current-limit = <1000000>;
+ usb-otg-in-supply = <&pm8941_5vs1>;
+
+ otg-vbus {};
+ };
+ };