Squashed 'dts/upstream/' content from commit aaba2d45dc2a

git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
new file mode 100644
index 0000000..b5ca40d
--- /dev/null
+++ b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
+  GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
+              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+              - renesas,r9a08g045-pinctrl # RZ/G3S
+
+      - items:
+          - enum:
+              - renesas,r9a07g054-pinctrl     # RZ/V2L
+          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: GPIO_RSTN signal
+      - description: GPIO_PORT_RESETN signal
+      - description: GPIO_SPARE_RESETN signal
+
+additionalProperties:
+  anyOf:
+    - type: object
+      additionalProperties: false
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+        - if:
+            properties:
+              compatible:
+                contains:
+                  enum:
+                    - renesas,r9a08g045-pinctrl
+          then:
+            properties:
+              drive-strength: false
+              output-impedance-ohms: false
+              slew-rate: false
+          else:
+            properties:
+              drive-strength-microamp: false
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZG2L_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
+        pins: true
+        drive-strength:
+          enum: [ 2, 4, 8, 12 ]
+        drive-strength-microamp:
+          enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700,
+                  5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000,
+                  10000 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
+        power-source:
+          description: I/O voltage in millivolt.
+          enum: [ 1800, 2500, 3300 ]
+        slew-rate: true
+        gpio-hog: true
+        gpios: true
+        input-enable: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    pinctrl: pinctrl@11030000 {
+            compatible = "renesas,r9a07g044-pinctrl";
+            reg = <0x11030000 0x10000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+            resets = <&cpg R9A07G044_GPIO_RSTN>,
+                     <&cpg R9A07G044_GPIO_PORT_RESETN>,
+                     <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+            power-domains = <&cpg>;
+
+            scif0_pins: serial0 {
+                    pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
+                             <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
+            };
+
+            i2c1_pins: i2c1 {
+                    pins = "RIIC1_SDA", "RIIC1_SCL";
+                    input-enable;
+            };
+
+            sd1-pwr-en-hog {
+                    gpio-hog;
+                    gpios = <RZG2L_GPIO(39, 2) 0>;
+                    output-high;
+                    line-name = "sd1_pwr_en";
+            };
+
+            sdhi1_pins: sd1 {
+                    sd1_mux {
+                            pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
+                                     <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
+                            power-source  = <3300>;
+                    };
+
+                    sd1_data {
+                            pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+                            power-source  = <3300>;
+                    };
+
+                    sd1_ctrl {
+                            pins = "SD1_CLK", "SD1_CMD";
+                            power-source  = <3300>;
+                    };
+            };
+    };