Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/phy/phy-mapphone-mdm6600.txt b/Bindings/phy/phy-mapphone-mdm6600.txt
new file mode 100644
index 0000000..29427d4
--- /dev/null
+++ b/Bindings/phy/phy-mapphone-mdm6600.txt
@@ -0,0 +1,29 @@
+Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
+
+Required properties:
+- compatible Must be "motorola,mapphone-mdm6600"
+- enable-gpios GPIO to enable the USB PHY
+- power-gpios GPIO to power on the device
+- reset-gpios GPIO to reset the device
+- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for
+ normal mode versus USB flashing mode
+- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
+- motorola,status-gpios Three GPIOs to read the power state of the MDM6600
+
+Example:
+
+usb-phy {
+ compatible = "motorola,mapphone-mdm6600";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+};