Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/phy/mediatek,tphy.yaml b/Bindings/phy/mediatek,tphy.yaml
new file mode 100644
index 0000000..2bb9154
--- /dev/null
+++ b/Bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller
+
+maintainers:
+ - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+ The T-PHY controller supports physical layer functionality for a number of
+ controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+ Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
+ T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode:
+ -----------------------------------
+ Version 1:
+ port offset bank
+ shared 0x0000 SPLLC
+ 0x0100 FMREG
+ u2 port0 0x0800 U2PHY_COM
+ u3 port0 0x0900 U3PHYD
+ 0x0a00 U3PHYD_BANK2
+ 0x0b00 U3PHYA
+ 0x0c00 U3PHYA_DA
+ u2 port1 0x1000 U2PHY_COM
+ u3 port1 0x1100 U3PHYD
+ 0x1200 U3PHYD_BANK2
+ 0x1300 U3PHYA
+ 0x1400 U3PHYA_DA
+ u2 port2 0x1800 U2PHY_COM
+ ...
+
+ Version 2/3:
+ port offset bank
+ u2 port0 0x0000 MISC
+ 0x0100 FMREG
+ 0x0300 U2PHY_COM
+ u3 port0 0x0700 SPLLC
+ 0x0800 CHIP
+ 0x0900 U3PHYD
+ 0x0a00 U3PHYD_BANK2
+ 0x0b00 U3PHYA
+ 0x0c00 U3PHYA_DA
+ u2 port1 0x1000 MISC
+ 0x1100 FMREG
+ 0x1300 U2PHY_COM
+ u3 port1 0x1700 SPLLC
+ 0x1800 CHIP
+ 0x1900 U3PHYD
+ 0x1a00 U3PHYD_BANK2
+ 0x1b00 U3PHYA
+ 0x1c00 U3PHYA_DA
+ u2 port2 0x2000 MISC
+ ...
+
+ SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
+ into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
+ added on V2; the FMREG bank for slew rate calibration is not used anymore
+ and reserved on V3;
+
+properties:
+ $nodename:
+ pattern: "^t-phy(@[0-9a-f]+)?$"
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-tphy
+ - mediatek,mt7623-tphy
+ - mediatek,mt7622-tphy
+ - mediatek,mt8516-tphy
+ - const: mediatek,generic-tphy-v1
+ - items:
+ - enum:
+ - mediatek,mt2712-tphy
+ - mediatek,mt7629-tphy
+ - mediatek,mt7986-tphy
+ - mediatek,mt8183-tphy
+ - mediatek,mt8186-tphy
+ - mediatek,mt8192-tphy
+ - mediatek,mt8365-tphy
+ - const: mediatek,generic-tphy-v2
+ - items:
+ - enum:
+ - mediatek,mt8188-tphy
+ - mediatek,mt8195-tphy
+ - const: mediatek,generic-tphy-v3
+ - const: mediatek,mt2701-u3phy
+ deprecated: true
+ - const: mediatek,mt2712-u3phy
+ deprecated: true
+ - const: mediatek,mt8173-u3phy
+
+ reg:
+ description:
+ Register shared by multiple ports, exclude port's private register.
+ It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+ T-PHY V2/V3, such as mt2712.
+ maxItems: 1
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+ # Used with non-empty value if optional 'reg' is not provided.
+ # The format of the value is an arbitrary number of triplets of
+ # (child-bus-address, parent-bus-address, length).
+ ranges: true
+
+ mediatek,src-ref-clk-mhz:
+ description:
+ Frequency of reference clock for slew rate calibrate
+ default: 26
+
+ mediatek,src-coef:
+ description:
+ Coefficient for slew rate calibrate, depends on SoC process
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 28
+
+# Required child node:
+patternProperties:
+ "^(usb|pcie|sata)-phy@[0-9a-f]+$":
+ type: object
+ description:
+ A sub-node is required for each port the controller provides.
+ Address range information including the usual 'reg' property
+ is used inside these nodes to describe the controller's topology.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+ - description: Reference clock of analog phy
+ description:
+ Uses both clocks if the clock of analog and digital phys are
+ separated, otherwise uses "ref" clock only if needed.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: ref
+ - const: da_ref
+
+ "#phy-cells":
+ const: 1
+ description: |
+ The cells contain the following arguments.
+
+ - description: The PHY type
+ enum:
+ - PHY_TYPE_USB2
+ - PHY_TYPE_USB3
+ - PHY_TYPE_PCIE
+ - PHY_TYPE_SATA
+ - PHY_TYPE_SGMII
+
+ nvmem-cells:
+ items:
+ - description: internal R efuse for U2 PHY or U3/PCIe PHY
+ - description: rx_imp_sel efuse for U3/PCIe PHY
+ - description: tx_imp_sel efuse for U3/PCIe PHY
+ description: |
+ Phandles to nvmem cell that contains the efuse data;
+ Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+ three items should be provided at the same time for U3/PCIe PHY,
+ when use software to load efuse;
+ If unspecified, will use hardware auto-load efuse.
+
+ nvmem-cell-names:
+ items:
+ - const: intr
+ - const: rx_imp
+ - const: tx_imp
+
+ # The following optional vendor properties are only for debug or HQA test
+ mediatek,eye-src:
+ description:
+ The value of slew rate calibrate (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,eye-vrt:
+ description:
+ The selection of VRT reference voltage (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,eye-term:
+ description:
+ The selection of HS_TX TERM reference voltage (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 7
+
+ mediatek,intr:
+ description:
+ The selection of internal resistor (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 31
+
+ mediatek,discth:
+ description:
+ The selection of disconnect threshold (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 15
+
+ mediatek,pre-emphasis:
+ description:
+ The level of pre-emphasis which used to widen the eye opening and
+ boost eye swing, the unit step is about 4.16% increment; e.g. the
+ level 1 means amplitude increases about 4.16%, the level 2 is about
+ 8.3% etc. (U2 phy)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 3
+
+ mediatek,bc12:
+ description:
+ Specify the flag to enable BC1.2 if support it
+ type: boolean
+
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
+ usb@11271000 {
+ compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+ reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+ reg-names = "mac", "ippc";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_ck";
+ };
+
+ t-phy@11290000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0x11290000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ u2port0: usb-phy@11290800 {
+ reg = <0x11290800 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u3port0: usb-phy@11290900 {
+ reg = <0x11290900 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+
+ u2port1: usb-phy@11291000 {
+ reg = <0x11291000 0x100>;
+ #phy-cells = <1>;
+ };
+ };
+
+...