Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml b/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml
new file mode 100644
index 0000000..9488394
--- /dev/null
+++ b/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner F1C100s USB PHY
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,suniv-f1c100s-usb-phy
+
+ reg:
+ maxItems: 1
+ description: PHY Control registers
+
+ reg-names:
+ const: phy_ctrl
+
+ clocks:
+ maxItems: 1
+ description: USB OTG PHY bus clock
+
+ clock-names:
+ const: usb0_phy
+
+ resets:
+ maxItems: 1
+ description: USB OTG reset
+
+ reset-names:
+ const: usb0_reset
+
+ usb0_id_det-gpios:
+ maxItems: 1
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ maxItems: 1
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+ #include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+ phy@1c13400 {
+ compatible = "allwinner,suniv-f1c100s-usb-phy";
+ reg = <0x01c13400 0x10>;
+ reg-names = "phy_ctrl";
+ clocks = <&ccu CLK_USB_PHY0>;
+ clock-names = "usb0_phy";
+ resets = <&ccu RST_USB_PHY0>;
+ reset-names = "usb0_reset";
+ #phy-cells = <1>;
+ usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>;
+ };