diff --git a/Bindings/pci/83xx-512x-pci.txt b/Bindings/pci/83xx-512x-pci.txt
new file mode 100644
index 0000000..3abeecf
--- /dev/null
+++ b/Bindings/pci/83xx-512x-pci.txt
@@ -0,0 +1,39 @@
+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same PCI bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+    The first is for the internal PCI bridge registers
+    The second is for the PCI config space access registers
+
+Example (MPC8313ERDB)
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+				/* IDSEL 0x0F - PCI slot */
+				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
diff --git a/Bindings/pci/aardvark-pci.txt b/Bindings/pci/aardvark-pci.txt
new file mode 100644
index 0000000..2b8ca92
--- /dev/null
+++ b/Bindings/pci/aardvark-pci.txt
@@ -0,0 +1,59 @@
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+   handle MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+   define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+	pcie0: pcie@d0070000 {
+		compatible = "marvell,armada-3700-pcie";
+		device_type = "pci";
+		reg = <0 0xd0070000 0 0x20000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		msi-controller;
+		msi-parent = <&pcie0>;
+		ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+			  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		phys = <&comphy1 0>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
diff --git a/Bindings/pci/altera-pcie-msi.txt b/Bindings/pci/altera-pcie-msi.txt
new file mode 100644
index 0000000..9514c32
--- /dev/null
+++ b/Bindings/pci/altera-pcie-msi.txt
@@ -0,0 +1,27 @@
+* Altera PCIe MSI controller
+
+Required properties:
+- compatible:	should contain "altr,msi-1.0"
+- reg:		specifies the physical base address of the controller and
+		the length of the memory mapped region.
+- reg-names:	must include the following entries:
+		"csr": CSR registers
+		"vector_slave": vectors slave port region
+- interrupts:	specifies the interrupt source of the parent interrupt
+		controller. The format of the interrupt specifier depends on the
+		parent interrupt controller.
+- num-vectors:	number of vectors, range 1 to 32.
+- msi-controller:	indicates that this is MSI controller node
+
+
+Example
+msi0: msi@0xFF200000 {
+	compatible = "altr,msi-1.0";
+	reg = <0xFF200000 0x00000010
+		0xFF200010 0x00000080>;
+	reg-names = "csr", "vector_slave";
+	interrupt-parent = <&hps_0_arm_gic_0>;
+	interrupts = <0 42 4>;
+	msi-controller;
+	num-vectors = <32>;
+};
diff --git a/Bindings/pci/altera-pcie.txt b/Bindings/pci/altera-pcie.txt
new file mode 100644
index 0000000..816b244
--- /dev/null
+++ b/Bindings/pci/altera-pcie.txt
@@ -0,0 +1,50 @@
+* Altera PCIe controller
+
+Required properties:
+- compatible :	should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
+- reg:		a list of physical base address and length for TXS and CRA.
+		For "altr,pcie-root-port-2.0", additional HIP base address and length.
+- reg-names:	must include the following entries:
+		"Txs": TX slave port region
+		"Cra": Control register access region
+		"Hip": Hard IP region (if "altr,pcie-root-port-2.0")
+- interrupts:	specifies the interrupt source of the parent interrupt
+		controller.  The format of the interrupt specifier depends
+		on the parent interrupt controller.
+- device_type:	must be "pci"
+- #address-cells:	set to <3>
+- #size-cells:		set to <2>
+- #interrupt-cells:	set to <1>
+- ranges:	describes the translation of addresses for root ports and
+		standard PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+		mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent:	Link to the hardware entity that serves as the MSI controller
+		for this PCIe controller.
+- bus-range:	PCI bus numbers covered
+
+Example
+	pcie_0: pcie@c00000000 {
+		compatible = "altr,pcie-root-port-1.0";
+		reg = <0xc0000000 0x20000000>,
+			<0xff220000 0x00004000>;
+		reg-names = "Txs", "Cra";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 40 4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0xFF>;
+		device_type = "pci";
+		msi-parent = <&msi_to_gic_gen_0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_0 1>,
+			            <0 0 0 2 &pcie_0 2>,
+			            <0 0 0 3 &pcie_0 3>,
+			            <0 0 0 4 &pcie_0 4>;
+		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+			  0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+	};
diff --git a/Bindings/pci/amlogic,axg-pcie.yaml b/Bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 0000000..a5bd90b
--- /dev/null
+++ b/Bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIe SoC controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      enum:
+        - amlogic,axg-pcie
+        - amlogic,g12a-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,axg-pcie
+          - amlogic,g12a-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: External local bus interface registers
+      - description: Meson designed configuration registers
+      - description: PCIe configuration space
+
+  reg-names:
+    items:
+      - const: elbi
+      - const: cfg
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe GEN 100M PLL clock
+      - description: PCIe RC clock gate
+      - description: PCIe PHY clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: port
+      - const: general
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  resets:
+    items:
+      - description: Port Reset
+      - description: Shared APB reset
+
+  reset-names:
+    items:
+      - const: port
+      - const: apb
+
+  num-lanes:
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clock
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie: pcie@f9800000 {
+        compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+        reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+        reg-names = "elbi", "cfg", "config";
+        interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+        clock-names = "pclk", "port", "general";
+        resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+        reset-names = "port", "apb";
+        phys = <&pcie_phy>;
+        phy-names = "pcie";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+        bus-range = <0x0 0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        num-lanes = <1>;
+        ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+    };
+...
diff --git a/Bindings/pci/apple,pcie.yaml b/Bindings/pci/apple,pcie.yaml
new file mode 100644
index 0000000..215ff9a
--- /dev/null
+++ b/Bindings/pci/apple,pcie.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple PCIe host controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple PCIe host controller is a PCIe host controller with
+  multiple root ports present in Apple ARM SoC platforms, including
+  various iPhone and iPad devices and the "Apple Silicon" Macs.
+  The controller incorporates Synopsys DesigWare PCIe logic to
+  implements its root ports.  But the ATU found on most DesignWare
+  PCIe host bridges is absent.
+
+  All root ports share a single ECAM space, but separate GPIOs are
+  used to take the PCI devices on those ports out of reset.  Therefore
+  the standard "reset-gpios" and "max-link-speed" properties appear on
+  the child nodes that represent the PCI bridges that correspond to
+  the individual root ports.
+
+  MSIs are handled by the PCIe controller and translated into regular
+  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
+  distributed over the root ports as the OS sees fit by programming
+  the PCIe controller's port registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pcie
+          - apple,t8112-pcie
+          - apple,t6000-pcie
+      - const: apple,pcie
+
+  reg:
+    minItems: 3
+    maxItems: 6
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: config
+      - const: rc
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+
+  ranges:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    description:
+      Interrupt specifiers, one for each root port.
+    minItems: 1
+    maxItems: 4
+
+  msi-parent: true
+
+  msi-ranges:
+    maxItems: 1
+
+  iommu-map: true
+  iommu-map-mask: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - bus-range
+  - interrupts
+  - msi-controller
+  - msi-parent
+  - msi-ranges
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8103-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 5
+        interrupts:
+          maxItems: 3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie0: pcie@690000000 {
+        compatible = "apple,t8103-pcie", "apple,pcie";
+        device_type = "pci";
+
+        reg = <0x6 0x90000000 0x0 0x1000000>,
+              <0x6 0x80000000 0x0 0x100000>,
+              <0x6 0x81000000 0x0 0x4000>,
+              <0x6 0x82000000 0x0 0x4000>,
+              <0x6 0x83000000 0x0 0x4000>;
+        reg-names = "config", "rc", "port0", "port1", "port2";
+
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+        msi-controller;
+        msi-parent = <&pcie0>;
+        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+        iommu-map = <0x100 &dart0 1 1>,
+                    <0x200 &dart1 1 1>,
+                    <0x300 &dart2 1 1>;
+        iommu-map-mask = <0xff00>;
+
+        bus-range = <0 3>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+        power-domains = <&ps_apcie_gp>;
+        pinctrl-0 = <&pcie_pins>;
+        pinctrl-names = "default";
+
+        pci@0,0 {
+          device_type = "pci";
+          reg = <0x0 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 152 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@1,0 {
+          device_type = "pci";
+          reg = <0x800 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 153 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@2,0 {
+          device_type = "pci";
+          reg = <0x1000 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 33 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+      };
+    };
diff --git a/Bindings/pci/axis,artpec6-pcie.txt b/Bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 0000000..cc6dcdb
--- /dev/null
+++ b/Bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,50 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
+	      "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
+	      "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
+	      "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
+- reg: base addresses and lengths of the PCIe controller (DBI),
+	the PHY controller, and configuration address space.
+- reg-names: Must include the following entries:
+	- "dbi"
+	- "phy"
+	- "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+	used to enable and control the Synopsys IP.
+
+Example:
+
+	pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+	};
diff --git a/Bindings/pci/baikal,bt1-pcie.yaml b/Bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 0000000..8eaa07a
--- /dev/null
+++ b/Bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Embedded into Baikal-T1 SoC Root Complex controller with a single port
+  activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+  to have just a single Root Port function and is capable of establishing the
+  link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+  control module, so the proper interface initialization is supposed to be
+  performed by software. There four in- and four outbound iATU regions
+  which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-pcie
+
+  reg:
+    description:
+      DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+      peripheral devices CFG-space access.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: config
+
+  interrupts:
+    description:
+      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+      request and eight Read/Write eDMA IRQ lines are available.
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+      - const: dma4
+      - const: dma5
+      - const: dma6
+      - const: dma7
+      - const: msi
+      - const: aer
+      - const: pme
+      - const: hp
+      - const: bw_mg
+      - const: l_eq
+
+  clocks:
+    description:
+      DBI (attached to the APB bus), AXI-bus master and slave interfaces
+      are fed up by the dedicated application clocks. A common reference
+      clock signal is supposed to be attached to the corresponding Ref-pad
+      of the SoC. It will be redistributed amongst the controller core
+      sub-modules (pipe, core, aux, etc).
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+      - const: ref
+
+  resets:
+    description:
+      A comprehensive controller reset logic is supposed to be implemented
+      by software, so almost all the possible application and core reset
+      signals are exposed via the system CCU module.
+    maxItems: 9
+
+  reset-names:
+    items:
+      - const: mstr
+      - const: slv
+      - const: pwr
+      - const: hot
+      - const: phy
+      - const: core
+      - const: pipe
+      - const: sticky
+      - const: non-sticky
+
+  baikal,bt1-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Baikal-T1 System Controller DT node. It's required to
+      access some additional PM, Reset-related and LTSSM signals.
+
+  num-lanes:
+    maximum: 4
+
+  max-link-speed:
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie@1f052000 {
+      compatible = "baikal,bt1-pcie";
+      device_type = "pci";
+      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+      reg-names = "dbi", "dbi2", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "dma0", "dma1", "dma2", "dma3",
+                        "dma4", "dma5", "dma6", "dma7",
+                        "msi", "aer", "pme", "hp", "bw_mg",
+                        "l_eq";
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+      clock-names = "dbi", "mstr", "slv", "ref";
+
+      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+               <&ccu_sys 9>;
+      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+                    "sticky", "non-sticky";
+
+      reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+      num-lanes = <4>;
+      max-link-speed = <3>;
+    };
+...
diff --git a/Bindings/pci/brcm,iproc-pcie.yaml b/Bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 0000000..0e07ab6
--- /dev/null
+++ b/Bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  dma-coherent: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    $ref: /schemas/interrupt-controller/msi-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+      interrupts:
+        maxItems: 4
+
+      brcm,pcie-msi-inten:
+        type: boolean
+        description:
+          Needs to be present for some older iProc platforms that require the
+          interrupt enable registers to be set explicitly to enable MSI
+
+  msi-parent: true
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gic: interrupt-controller {
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
+
+    pcie@18012000 {
+        compatible = "brcm,iproc-pcie";
+        reg = <0x18012000 0x1000>;
+
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+        linux,pci-domain = <0>;
+
+        bus-range = <0x00 0xff>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x81000000 0          0 0x28000000 0 0x00010000>,
+                 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+        phys = <&phy 0 5>;
+        phy-names = "pcie-phy";
+
+        brcm,pcie-ob;
+        brcm,pcie-ob-axi-offset = <0x00000000>;
+
+        msi-parent = <&msi0>;
+
+        /* iProc event queue based MSI */
+        msi0: msi {
+            compatible = "brcm,iproc-msi";
+            msi-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                    <GIC_SPI 97 IRQ_TYPE_NONE>,
+                    <GIC_SPI 98 IRQ_TYPE_NONE>,
+                    <GIC_SPI 99 IRQ_TYPE_NONE>;
+        };
+    };
+  - |
+    pcie@18013000 {
+        compatible = "brcm,iproc-pcie";
+        reg = <0x18013000 0x1000>;
+
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+        linux,pci-domain = <1>;
+
+        bus-range = <0x00 0xff>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x81000000 0          0 0x48000000 0 0x00010000>,
+                 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+        phys = <&phy 1 6>;
+        phy-names = "pcie-phy";
+    };
diff --git a/Bindings/pci/brcm,stb-pcie.yaml b/Bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 0000000..7e15aae
--- /dev/null
+++ b/Bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm4908-pcie
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    minItems: 1
+    maxItems: 4
+
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+  aspm-no-l0s: true
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4908-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset controller handling the PERST# signal
+
+        reset-names:
+          items:
+            - const: perst
+
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: phandle pointing to the RESCAL reset controller
+
+        reset-names:
+          items:
+            - const: rescal
+
+      required:
+        - resets
+        - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
+            };
+    };
diff --git a/Bindings/pci/cdns,cdns-pcie-ep.yaml b/Bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 0000000..98651ab
--- /dev/null
+++ b/Bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: mem
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@fc000000 {
+                compatible = "cdns,cdns-pcie-ep";
+                reg = <0x0 0xfc000000 0x0 0x01000000>,
+                      <0x0 0x80000000 0x0 0x40000000>;
+                reg-names = "reg", "mem";
+                cdns,max-outbound-regions = <16>;
+                max-functions = /bits/ 8 <8>;
+                phys = <&pcie_phy0>;
+                phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Bindings/pci/cdns,cdns-pcie-host.yaml b/Bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 0000000..bc3c48f
--- /dev/null
+++ b/Bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie-host.yaml#
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-host
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: cfg
+
+  msi-parent: true
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@fb000000 {
+            compatible = "cdns,cdns-pcie-host";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xff>;
+            linux,pci-domain = <0>;
+            vendor-id = <0x17cd>;
+            device-id = <0x0200>;
+
+            reg = <0x0 0xfb000000  0x0 0x01000000>,
+                  <0x0 0x41000000  0x0 0x00001000>;
+            reg-names = "reg", "cfg";
+
+            ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
+                     <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+            #interrupt-cells = <0x1>;
+
+            interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1>,
+                 <0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1>,
+                 <0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1>,
+                 <0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+
+            interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+
+            msi-parent = <&its_pci>;
+
+            phys = <&pcie_phy0>;
+            phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Bindings/pci/cdns-pcie-ep.yaml b/Bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 0000000..47a302b
--- /dev/null
+++ b/Bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Device
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: cdns-pcie.yaml#
+  - $ref: pci-ep.yaml#
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+
+additionalProperties: true
diff --git a/Bindings/pci/cdns-pcie-host.yaml b/Bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 0000000..a6b4944
--- /dev/null
+++ b/Bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Host
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie.yaml#
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+    deprecated: true
+
+  cdns,no-bar-match-nbits:
+    description:
+      Set into the no BAR match register to configure the number of least
+      significant bits kept during inbound (PCIe -> AXI) address translations
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 64
+    default: 32
+    deprecated: true
+
+  msi-parent: true
+
+additionalProperties: true
diff --git a/Bindings/pci/cdns-pcie.yaml b/Bindings/pci/cdns-pcie.yaml
new file mode 100644
index 0000000..2e14f42
--- /dev/null
+++ b/Bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Core
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+  phys:
+    description:
+      One per lane if more than one in the list. If only one PHY listed it must
+      manage all lanes.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    items:
+      - const: pcie-phy
+    # FIXME: names when more than 1
+
+additionalProperties: true
diff --git a/Bindings/pci/faraday,ftpci100.yaml b/Bindings/pci/faraday,ftpci100.yaml
new file mode 100644
index 0000000..92efbf0
--- /dev/null
+++ b/Bindings/pci/faraday,ftpci100.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTPCI100 PCI Host Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+    is a generic IP block from Faraday Technology. It exists in two variants:
+    plain and dual PCI. The plain version embeds a cascading interrupt controller
+    into the host bridge. The dual version routes the interrupts to the host
+    chips interrupt controller.
+    The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+    Technology) and product ID 0x4321.
+    I/O space considerations:
+    The plain variant has 128MiB of non-prefetchable memory space, whereas the
+    "dual" variant has 64MiB. Take this into account when describing the ranges.
+
+    Interrupt map considerations:
+
+    The "dual" variant will get INT A, B, C, D from the system interrupt controller
+    and should point to respective interrupt in that controller in its interrupt-map.
+
+    The code which is the only documentation of how the Faraday PCI (the non-dual
+    variant) interrupts assigns the default interrupt mapping/swizzling has
+    typically been like this, doing the swizzling on the interrupt controller side
+    rather than in the interconnect:
+
+    interrupt-map-mask = <0xf800 0 0 7>;
+    interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 1>,
+        <0x6000 0 0 4 &pci_intc 2>;
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-pci
+          - const: faraday,ftpci100
+      - items:
+          - const: cortina,gemini-pci-dual
+          - const: faraday,ftpci100-dual
+      - const: faraday,ftpci100
+      - const: faraday,ftpci100-dual
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 3
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 2
+
+  dma-ranges:
+    minItems: 3
+    description: |
+      three ranges for the inbound memory region. The ranges must
+      be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+      128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+      pre-fetchable.
+
+  clocks:
+    items:
+      - description: peripheral clock (PCLK)
+      - description: PCI clock (PCICLK).
+    description: |
+      If these are not present, they are assumed to be
+      hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: PCICLK
+
+  interrupt-controller:
+    type: object
+
+required:
+  - reg
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - dma-ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: faraday,ftpci100
+then:
+  required:
+    - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pci@50000000 {
+      compatible = "cortina,gemini-pci", "faraday,ftpci100";
+      reg = <0x50000000 0x100>;
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      bus-range = <0x00 0xff>;
+      ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+        <0x01000000 0 0          0x50000000 0 0x00100000>,
+        /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+        <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+      /* DMA ranges */
+      dma-ranges =
+        /* 128MiB at 0x00000000-0x07ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 0>,
+        <0x6000 0 0 4 &pci_intc 0>;
+      pci_intc: interrupt-controller {
+        interrupt-parent = <&intcon>;
+        interrupt-controller;
+        interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <0>;
+        #interrupt-cells = <1>;
+      };
+    };
diff --git a/Bindings/pci/fsl,imx6q-pcie-common.yaml b/Bindings/pci/fsl,imx6q-pcie-common.yaml
new file mode 100644
index 0000000..d91b639
--- /dev/null
+++ b/Bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe RC/EP controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description:
+  Generic Freescale i.MX PCIe Root Port and Endpoint controller
+  properties.
+
+properties:
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  num-lanes:
+    const: 1
+
+  fsl,imx7d-pcie-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+      required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie,
+      and imx8mq-pcie-ep.
+
+  power-domains:
+    minItems: 1
+    items:
+      - description: The phandle pointing to the DISPLAY domain for
+          imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for
+          imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep.
+      - description: The phandle pointing to the PCIE_PHY power domains
+          for imx6sx-pcie and imx6sx-pcie-ep.
+
+  power-domain-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: pcie_phy
+
+  resets:
+    minItems: 2
+    maxItems: 3
+    description: Phandles to PCIe-related reset lines exposed by SRC
+      IP block. Additional required by imx7d-pcie, imx7d-pcie-ep,
+      imx8mq-pcie, and imx8mq-pcie-ep.
+
+  reset-names:
+    minItems: 2
+    maxItems: 3
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-3p5db:
+    description: Gen2 (3.5db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-6db:
+    description: Gen2 (6db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+
+  fsl,tx-swing-full:
+    description: Gen2 TX SWING FULL value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,tx-swing-low:
+    description: TX launch amplitude swing_low value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,max-link-speed:
+    description: Specify PCI Gen for link capability (optional required).
+      Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+      requirements and thus for gen2 capability a gen2 compliant clock
+      generator should be used and configured.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  vpcie-supply:
+    description: Should specify the regulator in charge of PCIe port power.
+      The regulator will be enabled when initializing the PCIe host and
+      disabled either as part of the init process or when shutting down
+      the host (optional required).
+
+  vph-supply:
+    description: Should specify the regulator in charge of VPH one of
+      the three PCIe PHY powers. This regulator can be supplied by both
+      1.8v and 3.3v voltage supplies (optional required).
+
+required:
+  - clocks
+  - clock-names
+  - num-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pcie
+              - fsl,imx6sx-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mq-pcie
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-pcie
+              - fsl,imx8mp-pcie
+              - fsl,imx8mm-pcie-ep
+              - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains: false
+        power-domain-names: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx6q-pcie
+                - fsl,imx6qp-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx6q-pcie-ep
+                - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6sx-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx8mq-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6sx-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: pciephy
+            - const: apps
+            - const: turnoff
+    else:
+      properties:
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: apps
+            - const: turnoff
+
+additionalProperties: true
+
+...
diff --git a/Bindings/pci/fsl,imx6q-pcie-ep.yaml b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
new file mode 100644
index 0000000..ee155ed
--- /dev/null
+++ b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe Endpoint controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and
+  thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-ep
+      - fsl,imx8mq-pcie-ep
+      - fsl,imx8mp-pcie-ep
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: addr_space
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: builtin eDMA interrupter.
+
+  interrupt-names:
+    items:
+      - const: dma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+    else:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+    #include <dt-bindings/reset/imx8mp-reset.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie_ep: pcie-ep@33800000 {
+      compatible = "fsl,imx8mp-pcie-ep";
+      reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+      reg-names = "dbi", "addr_space";
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_HSIO_AXI>,
+               <&clk IMX8MP_CLK_PCIE_ROOT>;
+      clock-names = "pcie", "pcie_bus", "pcie_aux";
+      assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+      assigned-clock-rates = <10000000>;
+      assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+      num-lanes = <1>;
+      interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+      interrupt-names = "dma";
+      fsl,max-link-speed = <3>;
+      power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+      resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+               <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+      reset-names = "apps", "turnoff";
+      phys = <&pcie_phy>;
+      phy-names = "pcie-phy";
+      num-ib-windows = <4>;
+      num-ob-windows = <4>;
+    };
diff --git a/Bindings/pci/fsl,imx6q-pcie.yaml b/Bindings/pci/fsl,imx6q-pcie.yaml
new file mode 100644
index 0000000..81bbb87
--- /dev/null
+++ b/Bindings/pci/fsl,imx6q-pcie.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe host controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See fsl,imx6q-pcie-ep.yaml for details on the Endpoint mode device tree
+  bindings.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-pcie
+      - fsl,imx6sx-pcie
+      - fsl,imx6qp-pcie
+      - fsl,imx7d-pcie
+      - fsl,imx8mq-pcie
+      - fsl,imx8mm-pcie
+      - fsl,imx8mp-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: builtin MSI controller.
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  reset-gpio:
+    description: Should specify the GPIO for controlling the PCI bus device
+      reset signal. It's not polarity aware and defaults to active-low reset
+      sequence (L=reset state, H=operation state) (optional required).
+
+  reset-gpio-active-high:
+    description: If present then the reset sequence using the GPIO
+      specified in the "reset-gpio" property is reversed (H=reset state,
+      L=operation state) (optional required).
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6sx-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie: pcie@1ffc000 {
+        compatible = "fsl,imx6q-pcie";
+        reg = <0x01ffc000 0x04000>,
+              <0x01f00000 0x80000>;
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>,
+                 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+        num-lanes = <1>;
+        interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0x7>;
+        interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+                <&clks IMX6QDL_CLK_LVDS1_GATE>,
+                <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+        clock-names = "pcie", "pcie_bus", "pcie_phy";
+    };
+...
diff --git a/Bindings/pci/fsl,pci.txt b/Bindings/pci/fsl,pci.txt
new file mode 100644
index 0000000..d8ac4a7
--- /dev/null
+++ b/Bindings/pci/fsl,pci.txt
@@ -0,0 +1,27 @@
+* Bus Enumeration by Freescale PCI-X Agent
+
+Typically any Freescale PCI-X bridge hardware strapped into Agent mode
+is prevented from enumerating the bus. The PrPMC form-factor requires
+all mezzanines to be PCI-X Agents, but one per system may still
+enumerate the bus.
+
+The property defined below will allow a PCI-X bridge to be used for bus
+enumeration despite being strapped into Agent mode.
+
+Required properties:
+- fsl,pci-agent-force-enum : There is no value associated with this
+  property. The property itself is treated as a boolean.
+
+Example:
+
+	/* PCI-X bridge known to be PrPMC Monarch */
+	pci0: pci@ef008000 {
+		fsl,pci-agent-force-enum;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		...
+		...
+	};
diff --git a/Bindings/pci/hisilicon,kirin-pcie.yaml b/Bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 0000000..c9f0499
--- /dev/null
+++ b/Bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+  - Xiaowei Song <songxiaowei@hisilicon.com>
+  - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+  It shares common functions with the PCIe DesignWare core driver and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - hisilicon,kirin960-pcie
+        - hisilicon,kirin970-pcie
+
+  reg:
+    description: |
+      Should contain dbi, apb, config registers location and length.
+      For hisilicon,kirin960-pcie, it should also contain phy.
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    maxItems: 4
+
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
+  hisilicon,clken-gpios:
+    description: |
+      Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
+      mini-PCIe slots.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@f4000000 {
+        compatible = "hisilicon,kirin960-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000>,
+              <0x0 0xff3fe000 0x0 0x1000>,
+              <0x0 0xf3f20000 0x0 0x40000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "phy", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <0 283 4>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0xf800 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+        clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+                      "pcie_apb_sys", "pcie_aclk";
+      };
+
+      pcie@f5000000 {
+        compatible = "hisilicon,kirin970-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000000>,
+              <0x0 0xfc180000 0x0 0x1000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        phys = <&pcie_phy>;
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio7 0 0>;
+        hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
+        pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
+          reg = <0 0 0 0 0>;
+          compatible = "pciclass,0604";
+          device_type = "pci";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+
+          pcie@0,0 { // Lane 0: upstream
+            reg = <0 0 0 0 0>;
+            compatible = "pciclass,0604";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            pcie@1,0 { // Lane 4: M.2
+              reg = <0x0800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio3 1 0>;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@5,0 { // Lane 5: Mini PCIe
+              reg = <0x2800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio27 4 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@7,0 { // Lane 6: Ethernet
+              reg = <0x03800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio25 2 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+          };
+        };
+      };
+    };
diff --git a/Bindings/pci/hisilicon-histb-pcie.txt b/Bindings/pci/hisilicon-histb-pcie.txt
new file mode 100644
index 0000000..5f0cf6c
--- /dev/null
+++ b/Bindings/pci/hisilicon-histb-pcie.txt
@@ -0,0 +1,69 @@
+HiSilicon STB PCIe host bridge DT description
+
+The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
+It shares common functions with the DesignWare PCIe core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should be one of the following strings:
+		"hisilicon,hi3798cv200-pcie"
+- reg: Should contain sysctl, rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+  "control": control registers of PCIe controller;
+  "rc-dbi": configuration space of PCIe controller;
+  "config": configuration transaction space of PCIe controller.
+- bus-range: PCI bus numbers covered.
+- interrupts: MSI interrupt.
+- interrupt-names: Must include "msi" entries.
+- clocks: List of phandle and clock specifier pairs as listed in clock-names
+  property.
+- clock-name: Must include the following entries:
+  "aux": auxiliary gate clock;
+  "pipe": pipe gate clock;
+  "sys": sys gate clock;
+  "bus": bus gate clock.
+- resets: List of phandle and reset specifier pairs as listed in reset-names
+  property.
+- reset-names: Must include the following entries:
+  "soft": soft reset;
+  "sys": sys reset;
+  "bus": bus reset.
+
+Optional properties:
+- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: The regulator in charge of PCIe port power.
+- phys: List of phandle and phy mode specifier, should be 0.
+- phy-names: Must be "phy".
+
+Example:
+	pcie@f9860000 {
+		compatible = "hisilicon,hi3798cv200-pcie";
+		reg = <0xf9860000 0x1000>,
+		      <0xf0000000 0x2000>,
+		      <0xf2000000 0x01000000>;
+		reg-names = "control", "rc-dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0 15>;
+		num-lanes = <1>;
+		ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
+			0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg PCIE_AUX_CLK>,
+			 <&crg PCIE_PIPE_CLK>,
+			 <&crg PCIE_SYS_CLK>,
+			 <&crg PCIE_BUS_CLK>;
+		clock-names = "aux", "pipe", "sys", "bus";
+		resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+		reset-names = "soft", "sys", "bus";
+		phys = <&combphy1 PHY_TYPE_PCIE>;
+		phy-names = "phy";
+	};
diff --git a/Bindings/pci/host-generic-pci.yaml b/Bindings/pci/host-generic-pci.yaml
new file mode 100644
index 0000000..d25423a
--- /dev/null
+++ b/Bindings/pci/host-generic-pci.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PCI host controller
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description: |
+  Firmware-initialised PCI host controllers and PCI emulations, such as the
+  virtio-pci implementations found in kvmtool and other para-virtualised
+  systems, do not require driver support for complexities such as regulator
+  and clock management. In fact, the controller may not even require the
+  configuration of a control interface by the operating system, instead
+  presenting a set of fixed windows describing a subset of IO, Memory and
+  Configuration Spaces.
+
+  Configuration Space is assumed to be memory-mapped (as opposed to being
+  accessed via an ioport) and laid out with a direct correspondence to the
+  geography of a PCI bus address by concatenating the various components to
+  form an offset.
+
+  For CAM, this 24-bit offset is:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 16 | device << 11 | function << 8 | register
+
+  While ECAM extends this by 4 bits to accommodate 4k of function space:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 20 | device << 15 | function << 12 | register
+
+properties:
+  compatible:
+    description: Depends on the layout of configuration space (CAM vs ECAM
+      respectively). May also have more specific compatibles.
+    oneOf:
+      - description:
+          PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP
+        items:
+          - const: arm,juno-r1-pcie
+          - const: plda,xpressrich3-axi
+          - const: pci-host-ecam-generic
+      - description: |
+          ThunderX PCI host controller for pass-1.x silicon
+
+          Firmware-initialized PCI host controller to on-chip devices found on
+          some Cavium ThunderX processors.  These devices have ECAM-based config
+          access, but the BARs are all at fixed addresses.  We handle the fixed
+          addresses by synthesizing Enhanced Allocation (EA) capabilities for
+          these devices.
+        const: cavium,pci-host-thunder-ecam
+      - description:
+          Cavium ThunderX PEM firmware-initialized PCIe host controller
+        const: cavium,pci-host-thunder-pem
+      - description:
+          HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some
+          firmware places the host controller in a mode where it is ECAM
+          compliant for all devices other than the root complex.
+        enum:
+          - hisilicon,hip06-pcie-ecam
+          - hisilicon,hip07-pcie-ecam
+      - description: |
+          In some cases, firmware may already have configured the Synopsys
+          DesignWare PCIe controller in RC mode with static ATU window mappings
+          that cover all config, MMIO and I/O spaces in a [mostly] ECAM
+          compatible fashion. In this case, there is no need for the OS to
+          perform any low level setup of clocks, PHYs or device registers, nor
+          is there any reason for the driver to reconfigure ATU windows for
+          config and/or IO space accesses at runtime.
+
+          In cases where the IP was synthesized with a minimum ATU window size
+          of 64 KB, it cannot be supported by the generic ECAM driver, because
+          it requires special config space accessors that filter accesses to
+          device #1 and beyond on the first bus.
+        items:
+          - enum:
+              - marvell,armada8k-pcie-ecam
+              - socionext,synquacer-pcie-ecam
+          - const: snps,dw-pcie-ecam
+      - description:
+          CAM or ECAM compliant PCI host controllers without any quirks
+        enum:
+          - pci-host-cam-generic
+          - pci-host-ecam-generic
+
+  reg:
+    description:
+      The Configuration Space base address and size, as accessed from the parent
+      bus. The base address corresponds to the first bus in the "bus-range"
+      property. If no "bus-range" is specified, this will be bus 0 (the
+      default). Some host controllers have a 2nd non-compliant address range,
+      so 2 entries are allowed.
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    description:
+      As described in IEEE Std 1275-1994, but must provide at least a
+      definition of non-prefetchable memory. One or both of prefetchable Memory
+      and IO Space may also be provided.
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+  iommu-map: true
+  iommu-map-mask: true
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,juno-r1-pcie
+    then:
+      required:
+        - dma-coherent
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - cavium,pci-host-thunder-pem
+                - hisilicon,hip06-pcie-ecam
+                - hisilicon,hip07-pcie-ecam
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@40000000 {
+            compatible = "pci-host-cam-generic";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0x1>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x01000000  0x0 0x01000000  0x0 0x00010000>,
+                     <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x3f000000>;
+
+            #interrupt-cells = <0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
+            interrupt-map = <   0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1>,
+                            < 0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1>,
+                            <0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1>,
+                            <0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)
+            interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
+        };
+    };
+...
diff --git a/Bindings/pci/intel,ixp4xx-pci.yaml b/Bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 0000000..debfb54
--- /dev/null
+++ b/Bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
diff --git a/Bindings/pci/intel,keembay-pcie-ep.yaml b/Bindings/pci/intel,keembay-pcie-ep.yaml
new file mode 100644
index 0000000..730e63f
--- /dev/null
+++ b/Bindings/pci/intel,keembay-pcie-ep.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Endpoint mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-pcie-ep
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: addr_space
+      - const: apb
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+      - const: pcie_mem_access
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pcie-ep@37000000 {
+          compatible = "intel,keembay-pcie-ep";
+          reg = <0x37000000 0x00001000>,
+                <0x37100000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36000000 0x01000000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+          num-lanes = <2>;
+    };
diff --git a/Bindings/pci/intel,keembay-pcie.yaml b/Bindings/pci/intel,keembay-pcie.yaml
new file mode 100644
index 0000000..505acc4
--- /dev/null
+++ b/Bindings/pci/intel,keembay-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Root Complex mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: intel,keembay-pcie
+
+  ranges:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: atu
+      - const: config
+      - const: apb
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: master
+      - const: aux
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #define KEEM_BAY_A53_PCIE
+    #define KEEM_BAY_A53_AUX_PCIE
+    pcie@37000000 {
+          compatible = "intel,keembay-pcie";
+          reg = <0x37000000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36e00000 0x00200000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "atu", "config", "apb";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          device_type = "pci";
+          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err";
+          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+          clock-names = "master", "aux";
+          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+          num-lanes = <2>;
+    };
diff --git a/Bindings/pci/intel-gw-pcie.yaml b/Bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 0000000..54e2890
--- /dev/null
+++ b/Bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: intel,lgm-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  num-lanes:
+    maximum: 2
+
+  max-link-speed:
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 120>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };
diff --git a/Bindings/pci/layerscape-pci.txt b/Bindings/pci/layerscape-pci.txt
new file mode 100644
index 0000000..ee8a479
--- /dev/null
+++ b/Bindings/pci/layerscape-pci.txt
@@ -0,0 +1,79 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  RC mode:
+        "fsl,ls1021a-pcie"
+        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
+        "fsl,ls2088a-pcie"
+        "fsl,ls1088a-pcie"
+        "fsl,ls1046a-pcie"
+        "fsl,ls1043a-pcie"
+        "fsl,ls1012a-pcie"
+        "fsl,ls1028a-pcie"
+  EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
+- fsl,pcie-scfg: Must include two entries.
+  The first entry must be a link to the SCFG device node
+  The second entry is the physical PCIe controller index starting from '0'.
+  This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
+Example:
+
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Bindings/pci/layerscape-pcie-gen4.txt b/Bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 0000000..b40fb5d
--- /dev/null
+++ b/Bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+  "csr_axi_slave": Bridge config registers
+  "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+		reg-names = "csr_axi_slave", "config_axi_slave";
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "aer", "pme", "intr";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		apio-wins = <8>;
+		ppio-wins = <8>;
+		dma-coherent;
+		bus-range = <0x0 0xff>;
+		msi-parent = <&its>;
+		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Bindings/pci/loongson.yaml b/Bindings/pci/loongson.yaml
new file mode 100644
index 0000000..a8324a9
--- /dev/null
+++ b/Bindings/pci/loongson.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+  PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-pci
+      - loongson,ls7a-pci
+      - loongson,rs780e-pci
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG0 standard config space register
+      - description: CFG1 extended config space register
+
+  ranges:
+    minItems: 1
+    maxItems: 3
+
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1a000000 {
+            compatible = "loongson,rs780e-pci";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x1a000000  0x0 0x2000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x00004000  0x0 0x00004000  0x0 0x00004000>,
+                     <0x02000000 0x0 0x40000000  0x0 0x40000000  0x0 0x40000000>;
+        };
+    };
+...
diff --git a/Bindings/pci/mediatek,mt7621-pcie.yaml b/Bindings/pci/mediatek,mt7621-pcie.yaml
new file mode 100644
index 0000000..e63e645
--- /dev/null
+++ b/Bindings/pci/mediatek,mt7621-pcie.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 PCIe controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |+
+  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
+  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci
+
+  reg:
+    items:
+      - description: host-pci bridge registers
+      - description: pcie port 0 RC control registers
+      - description: pcie port 1 RC control registers
+      - description: pcie port 2 RC control registers
+
+  ranges:
+    maxItems: 2
+
+patternProperties:
+  '^pcie@[0-2],0$':
+    type: object
+    $ref: /schemas/pci/pci-bus.yaml#
+
+    properties:
+      resets:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
+    required:
+      - "#interrupt-cells"
+      - interrupt-map-mask
+      - interrupt-map
+      - resets
+      - clocks
+      - phys
+      - phy-names
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pcie: pcie@1e140000 {
+        compatible = "mediatek,mt7621-pci";
+        reg = <0x1e140000 0x100>,
+              <0x1e142000 0x100>,
+              <0x1e143000 0x100>,
+              <0x1e144000 0x100>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pcie_pins>;
+        device_type = "pci";
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
+                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0xF800 0 0 0>;
+        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+
+        pcie@0,0 {
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 24>;
+            clocks = <&clkctrl 24>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy0";
+            ranges;
+        };
+
+        pcie@1,0 {
+            reg = <0x0800 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 25>;
+            clocks = <&clkctrl 25>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy1";
+            ranges;
+        };
+
+        pcie@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 26>;
+            clocks = <&clkctrl 26>;
+            phys = <&pcie2_phy 0>;
+            phy-names = "pcie-phy2";
+            ranges;
+        };
+    };
+...
diff --git a/Bindings/pci/mediatek-pcie-cfg.yaml b/Bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 0000000..841a3d2
--- /dev/null
+++ b/Bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,generic-pciecfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,generic-pciecfg", "syscon";
+        reg = <0x1a140000 0x1000>;
+    };
+...
diff --git a/Bindings/pci/mediatek-pcie-gen3.yaml b/Bindings/pci/mediatek-pcie-gen3.yaml
new file mode 100644
index 0000000..7e8c7a2
--- /dev/null
+++ b/Bindings/pci/mediatek-pcie-gen3.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |+
+  PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
+  and compatible with Gen2, Gen1 speed.
+
+  This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+  block diagram is as follows:
+
+                    +-----+
+                    | GIC |
+                    +-----+
+                       ^
+                       |
+                   port->irq
+                       |
+               +-+-+-+-+-+-+-+-+
+               |0|1|2|3|4|5|6|7| (PCIe intc)
+               +-+-+-+-+-+-+-+-+
+                ^ ^           ^
+                | |    ...    |
+        +-------+ +------+    +-----------+
+        |                |                |
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+  |0|1|...|30|31|  |0|1|...|30|31|  |0|1|...|30|31| (MSI sets)
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+   ^ ^      ^  ^    ^ ^      ^  ^    ^ ^      ^  ^
+   | |      |  |    | |      |  |    | |      |  |  (MSI vectors)
+   | |      |  |    | |      |  |    | |      |  |
+
+    (MSI SET0)       (MSI SET1)  ...   (MSI SET7)
+
+  With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+  each set has its own address for MSI message, and supports 32 MSI vectors
+  to generate interrupt.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7986-pcie
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: pcie-mac
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    maxItems: 1
+
+  iommu-map-mask:
+    const: 0
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ phy, mac ]
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ranges
+  - clocks
+  - clock-names
+  - '#interrupt-cells'
+  - interrupt-controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt8192-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: top_133m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: peri_mem
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: peri_26m
+            - const: top_133m
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00
+                      0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 44>,
+                     <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            clock-names = "pl_250m", "tl_26m", "tl_96m",
+                          "tl_32k", "peri_26m", "top_133m";
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+
+            resets = <&infracfg_rst 2>,
+                     <&infracfg_rst 3>;
+            reset-names = "phy", "mac";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };
diff --git a/Bindings/pci/mediatek-pcie.txt b/Bindings/pci/mediatek-pcie.txt
new file mode 100644
index 0000000..6842275
--- /dev/null
+++ b/Bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,289 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+	"mediatek,mt2701-pcie"
+	"mediatek,mt2712-pcie"
+	"mediatek,mt7622-pcie"
+	"mediatek,mt7623-pcie"
+	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names:
+  Mandatory entries:
+   - sys_ckN :transaction layer and data link layer clock
+  Required entries for MT2701/MT7623:
+   - free_ck :for reference clock of PCIe subsys
+  Required entries for MT2712/MT7622:
+   - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+	      initiated MMIO access
+  Required entries for MT7622:
+   - axi_ckN :application layer MMIO channel operating clock
+   - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+	      pcie_mac_ck/pcie_pipe_ck is turned off
+   - obff_ckN :OBFF functional block operating clock
+   - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+  where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+  number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+  which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+  number of root ports.
+
+Required properties for MT2712/MT7622/MT7629:
+-interrupts: A list of interrupt outputs of the controller, must have one
+	     entry for each PCIe port
+- interrupt-names: Must include the following entries:
+	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+  and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+
+Examples for MT7623:
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+		       <&pcie2_phy PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+	};
+
+Examples for MT2712:
+
+	pcie1: pcie@112ff000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+Examples for MT7622:
+
+	pcie0: pcie@1a143000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
diff --git a/Bindings/pci/microchip,pcie-host.yaml b/Bindings/pci/microchip,pcie-host.yaml
new file mode 100644
index 0000000..f7a3c26
--- /dev/null
+++ b/Bindings/pci/microchip,pcie-host.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PCIe Root Port Bridge Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,pcie-host-1.0 # PolarFire
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: apb
+
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie@2030000000 {
+                    compatible = "microchip,pcie-host-1.0";
+                    reg = <0x0 0x70000000 0x0 0x08000000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "cfg", "apb";
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <119>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+                    ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };
diff --git a/Bindings/pci/mobiveil-pcie.txt b/Bindings/pci/mobiveil-pcie.txt
new file mode 100644
index 0000000..6415699
--- /dev/null
+++ b/Bindings/pci/mobiveil-pcie.txt
@@ -0,0 +1,72 @@
+* Mobiveil AXI PCIe Root Port Bridge DT description
+
+Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+has up to 8 outbound and inbound windows for the address translation.
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "mbvl,gpex40-pcie"
+- reg: Should contain PCIe registers location and length
+	Mandatory:
+	"config_axi_slave": PCIe controller registers
+	"csr_axi_slave"	  : Bridge config registers
+	Optional:
+	"gpio_slave"	  : GPIO registers to control slot power
+	"apb_csr"	  : MSI registers
+
+- device_type: must be "pci"
+- apio-wins : number of requested apio outbound windows
+		default 2 outbound windows are configured -
+		1. Config window
+		2. Memory window
+- ppio-wins : number of requested ppio inbound windows
+		default 1 inbound memory window is configured.
+- bus-range: PCI bus numbers covered
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- interrupts: The interrupt line of the PCIe controller
+		last cell of this field is set to 4 to
+		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
+- interrupt-map-mask,
+	interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+
+Example:
+++++++++
+	pcie0: pcie@a0000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		compatible = "mbvl,gpex40-pcie";
+		reg =	<0xa0000000 0x00001000>,
+			<0xb0000000 0x00010000>,
+			<0xff000000 0x00200000>,
+			<0xb0010000 0x00001000>;
+		reg-names =	"config_axi_slave",
+				"csr_axi_slave",
+				"gpio_slave",
+				"apb_csr";
+		device_type = "pci";
+		apio-wins = <2>;
+		ppio-wins = <1>;
+		bus-range = <0x00000000 0x000000ff>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		interrupts = < 0 89 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 0 &pci_express 0>,
+				<0 0 0 1 &pci_express 1>,
+				<0 0 0 2 &pci_express 2>,
+				<0 0 0 3 &pci_express 3>;
+		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+
+	};
diff --git a/Bindings/pci/mvebu-pci.txt b/Bindings/pci/mvebu-pci.txt
new file mode 100644
index 0000000..6d022a9
--- /dev/null
+++ b/Bindings/pci/mvebu-pci.txt
@@ -0,0 +1,310 @@
+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+
+- compatible: one of the following values:
+    marvell,armada-370-pcie
+    marvell,armada-xp-pcie
+    marvell,dove-pcie
+    marvell,kirkwood-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges describing the MMIO registers to control the PCIe
+  interfaces, and ranges describing the MBus windows needed to access
+  the memory and I/O regions of each PCIe interface.
+- msi-parent: Link to the hardware entity that serves as the Message
+  Signaled Interrupt controller for this PCI controller.
+
+The ranges describing the MMIO registers have the following layout:
+
+    0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+where:
+
+  * r is a 32-bits value that gives the offset of the MMIO
+  registers of this PCIe interface, from the base of the internal
+  registers.
+
+  * s is a 32-bits value that give the size of this MMIO
+  registers area. This range entry translates the '0x82000000 0 r' PCI
+  address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
+  of the internal register window (as identified by MBUS_ID(0xf0,
+  0x01)).
+
+The ranges describing the MBus windows have the following layout:
+
+    0x8t000000 s 0     MBUS_ID(w, a) 0 1 0
+
+where:
+
+   * t is the type of the MBus window (as defined by the standard PCI DT
+   bindings), 1 for I/O and 2 for memory.
+
+   * s is the PCI slot that corresponds to this PCIe interface
+
+   * w is the 'target ID' value for the MBus window
+
+   * a the 'attribute' value for the MBus window.
+
+Since the location and size of the different MBus windows is not fixed in
+hardware, and only determined in runtime, those ranges cover the full first
+4 GB of the physical address space, and do not translate into a valid CPU
+address.
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+
+- reg: used only for interrupt mapping, so only the first four bytes
+  are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+  this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, translating the MBus windows ranges of the parent node into
+  standard PCI addresses.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+  define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+  multiple lanes. If this property is not found, we assume that the
+  value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
+- reset-gpios: optional GPIO to PERST#
+- reset-delay-us: delay in us to wait after reset de-assertion, if not
+  specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+   - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+  corresponding to the "interrupt-names". If non-empty then also additional
+  'interrupt-controller' subnode must be defined.
+
+Example:
+
+pcie-controller {
+	compatible = "marvell,armada-xp-pcie";
+	device_type = "pci";
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bus-range = <0x00 0xff>;
+	msi-parent = <&mpic>;
+
+	ranges =
+	       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000	/* Port 0.0 registers */
+		0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000	/* Port 2.0 registers */
+		0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000	/* Port 0.1 registers */
+		0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000	/* Port 0.2 registers */
+		0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000	/* Port 0.3 registers */
+		0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000	/* Port 1.0 registers */
+		0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000	/* Port 3.0 registers */
+		0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000	/* Port 1.1 registers */
+		0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000	/* Port 1.2 registers */
+		0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000	/* Port 1.3 registers */
+		0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+		0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+		0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+		0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+		0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+		0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+		0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+		0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+		0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+		0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+		0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+		0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+		0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+		0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+		0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+		0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+		0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+		0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+		0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+		0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+	pcie@1,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+		reg = <0x0800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+			  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 58>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		/* low-active PERST# reset on GPIO 25 */
+		reset-gpios = <&gpio0 25 1>;
+		/* wait 20ms for device settle after reset deassertion */
+		reset-delay-us = <20000>;
+		clocks = <&gateclk 5>;
+	};
+
+	pcie@2,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+		reg = <0x1000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+			  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 59>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
+		clocks = <&gateclk 6>;
+	};
+
+	pcie@3,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+		reg = <0x1800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+			  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 60>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
+		clocks = <&gateclk 7>;
+	};
+
+	pcie@4,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+		reg = <0x2000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+			  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 61>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
+		clocks = <&gateclk 8>;
+	};
+
+	pcie@5,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+		reg = <0x2800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+			  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 62>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 9>;
+	};
+
+	pcie@6,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+		reg = <0x3000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+			  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 63>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
+		clocks = <&gateclk 10>;
+	};
+
+	pcie@7,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+		reg = <0x3800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+			  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 64>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
+		clocks = <&gateclk 11>;
+	};
+
+	pcie@8,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+		reg = <0x4000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+			  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 65>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
+		clocks = <&gateclk 12>;
+	};
+
+	pcie@9,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+		reg = <0x4800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+			  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 99>;
+		marvell,pcie-port = <2>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 26>;
+	};
+
+	pcie@a,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+		reg = <0x5000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+			  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 103>;
+		marvell,pcie-port = <3>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 27>;
+	};
+};
diff --git a/Bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 0000000..a24fb83
--- /dev/null
+++ b/Bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
diff --git a/Bindings/pci/nvidia,tegra194-pcie.yaml b/Bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 0000000..fe81d52
--- /dev/null
+++ b/Bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+  the controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+  tree bindings.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie
+      - nvidia,tegra234-pcie
+
+  reg:
+    minItems: 4
+    items:
+      - description: controller's application logic registers
+      - description: configuration registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture to access the configuration space through ECAM.
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: appl
+      - const: config
+      - const: atu_dma
+      - const: dbi
+      - const: ecam
+
+  interrupts:
+    items:
+      - description: controller interrupt
+      - description: MSI interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+      - const: msi
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,update-fc-fixup:
+    description: |
+      This is a boolean property and needs to be present to improve performance
+      when a platform is designed in such a way that it satisfies at least one
+      of the following conditions thereby enabling Root Port to exchange
+      optimum number of FC (Flow Control) credits with downstream devices:
+
+      NOTE: This is applicable only for Tegra194.
+
+        1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+        2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+          a) speed is Gen-2 and MPS is 256B
+          b) speed is >= Gen-3 with any MPS
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals.
+
+  vpcie3v3-supply:
+    description: A phandle to the regulator node that supplies 3.3V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  vpcie12v-supply:
+    description: A phandle to the regulator node that supplies 12V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to use the reference clocking coming in from an external
+      clock source instead of using the internal clock source.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-pcie
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14180000 {
+            compatible = "nvidia,tegra194-pcie";
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+            reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <8>;
+            linux,pci-domain = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+            clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+                     <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 0>;
+
+            supports-clkreq;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000>, /* downstream I/O */
+                     <0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+                     <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+            vpcie3v3-supply = <&vdd_3v3_pcie>;
+            vpcie12v-supply = <&vdd_12v_pcie>;
+
+            phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+                   <&p2u_hsio_5>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14160000 {
+            compatible = "nvidia,tegra234-pcie";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+            reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+            reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <4>;
+            num-viewport = <8>;
+            linux,pci-domain = <4>;
+
+            clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+                     <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 4>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+                     <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+                     <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+            vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+            phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+                   <&p2u_hsio_7>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
diff --git a/Bindings/pci/nvidia,tegra20-pcie.txt b/Bindings/pci/nvidia,tegra20-pcie.txt
new file mode 100644
index 0000000..d099f34
--- /dev/null
+++ b/Bindings/pci/nvidia,tegra20-pcie.txt
@@ -0,0 +1,670 @@
+NVIDIA Tegra PCIe controller
+
+Required properties:
+- compatible: Must be:
+  - "nvidia,tegra20-pcie": for Tegra20
+  - "nvidia,tegra30-pcie": for Tegra30
+  - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
+  - "nvidia,tegra210-pcie": for Tegra210
+  - "nvidia,tegra186-pcie": for Tegra186
+- power-domains: To ungate power partition by BPMP powergate driver. Must
+  contain BPMP phandle and PCIe power partition ID. This is required only
+  for Tegra186.
+- device_type: Must be "pci"
+- reg: A list of physical base address and length for each set of controller
+  registers. Must contain an entry for each entry in the reg-names property.
+- reg-names: Must include the following entries:
+  "pads": PADS registers
+  "afi": AFI registers
+  "cs": configuration space region
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+  "intr": The Tegra interrupt that is asserted for controller interrupts
+  "msi": The Tegra interrupt that is asserted when an MSI is received
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+  - cell 0 specifies the bus and device numbers of the root port:
+    [23:16]: bus number
+    [15:11]: device number
+  - cell 1 denotes the upper 32 address bits and should be 0
+  - cell 2 contains the lower 32 address bits and is used to translate to the
+    CPU address space
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+  PCI regions. The entries must be 6 cells each, where the first three cells
+  correspond to the address as described for the #address-cells property
+  above, the fourth cell is the physical CPU address to translate to and the
+  fifth and six cells are as described for the #size-cells property above.
+  - The first two entries are expected to translate the addresses for the root
+    port registers, which are referenced by the assigned-addresses property of
+    the root port nodes (see below).
+  - The remaining entries setup the mapping for the standard I/O, memory and
+    prefetchable PCI regions. The first cell determines the type of region
+    that is setup:
+    - 0x81000000: I/O memory region
+    - 0x82000000: non-prefetchable memory region
+    - 0xc2000000: prefetchable memory region
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - pex
+  - afi
+  - pll_e
+  - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pex
+  - afi
+  - pcie_x
+
+Optional properties:
+- pinctrl-names: A list of pinctrl state names. Must contain the following
+  entries:
+  - "default": active state, puts PCIe I/O out of deep power down state
+  - "idle": puts PCIe I/O into deep power down state
+- pinctrl-0: phandle for the default/active state of pin configurations.
+- pinctrl-1: phandle for the idle state of pin configurations.
+
+Required properties on Tegra124 and later (deprecated):
+- phys: Must contain an entry for each entry in phy-names.
+- phy-names: Must include the following entries:
+  - pcie
+
+These properties are deprecated in favour of per-lane PHYs define in each of
+the root ports (see below).
+
+Power supplies for Tegra20:
+- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+  supply 1.05 V.
+- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+  supply 1.05 V.
+- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
+
+Power supplies for Tegra30:
+- Required:
+  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+    supply 1.05 V.
+  - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+    supply 1.05 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 1.8 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+- Optional:
+  - If lanes 0 to 3 are used:
+    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - If lanes 4 or 5 are used:
+    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+Power supplies for Tegra124:
+- Required:
+  - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+  - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 2.8-3.3 V.
+
+Power supplies for Tegra210:
+- Required:
+  - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
+    clocks. Must supply 1.8 V.
+  - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 1.8 V.
+
+Power supplies for Tegra186:
+- Required:
+  - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
+    supply 1.8 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 1.8 V.
+  - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
+    supply 1.8 V.
+
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: Must be "pci"
+- assigned-addresses: Address and size of the port configuration registers
+- reg: PCI bus address of the root port
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
+  are:
+  - Root port 0 uses 4 lanes, root port 1 is unused.
+  - Both root ports use 2 lanes.
+
+Required properties for Tegra124 and later:
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane. Note that the number
+  of entries does not have to (though usually will) be equal to the specified
+  number of lanes in the nvidia,num-lanes property. Entries are of the form
+  "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
+
+Examples:
+=========
+
+Tegra20:
+--------
+
+SoC DTSI:
+
+	pcie-controller@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <0 98 0x04   /* controller interrupt */
+		              0 99 0x04>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x10000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@80003000 {
+		status = "okay";
+
+		vdd-supply = <&pci_vdd_reg>;
+		pex-clk-supply = <&pci_clk_reg>;
+
+		/* root port 00:01.0 */
+		pci@1,0 {
+			status = "okay";
+
+			/* bridge 01:00.0 (optional) */
+			pci@0,0 {
+				reg = <0x010000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				device_type = "pci";
+
+				/* endpoint 02:00.0 */
+				pci@0,0 {
+					reg = <0x020000 0 0 0 0>;
+				};
+			};
+		};
+	};
+
+Note that devices on the PCI bus are dynamically discovered using PCI's bus
+enumeration and therefore don't need corresponding device nodes in DT. However
+if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
+device nodes need to be added in order to allow the bus' children to be
+instantiated at the proper location in the operating system's device tree (as
+illustrated by the optional nodes in the example above).
+
+Tegra30:
+--------
+
+SoC DTSI:
+
+	pcie-controller@3000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@3000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@3,0 {
+			status = "okay";
+		};
+	};
+
+Tegra124:
+---------
+
+SoC DTSI:
+
+	pcie-controller@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		/* Mini PCIe */
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+
+		/* Gigabit Ethernet */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+Tegra210:
+---------
+
+SoC DTSI:
+
+	pcie-controller@1003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@1003000 {
+		status = "okay";
+
+		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+Tegra186:
+---------
+
+SoC DTSI:
+
+	pcie@10003000 {
+		compatible = "nvidia,tegra186-pcie";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+		device_type = "pci";
+		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000   /* non-prefetchable memory (127 MiB) */
+			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+		clocks = <&bpmp TEGRA186_CLK_AFI>,
+			 <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "afi", "pex", "pll_e";
+
+		resets = <&bpmp TEGRA186_RESET_AFI>,
+			 <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
+		reset-names = "afi", "pex", "pcie_x";
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <0>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+	};
diff --git a/Bindings/pci/pci-armada8k.txt b/Bindings/pci/pci-armada8k.txt
new file mode 100644
index 0000000..ff25a13
--- /dev/null
+++ b/Bindings/pci/pci-armada8k.txt
@@ -0,0 +1,48 @@
+* Marvell Armada 7K/8K PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie"
+- reg: must contain two register regions
+   - the control register region
+   - the config space region
+- reg-names:
+   - "ctrl" for the control register region
+   - "config" for the config space region
+- interrupts: Interrupt specifier for the PCIe controller
+- clocks: reference to the PCIe controller clocks
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+	Either 1, 2 or 4 PHYs might be needed depending on the number of
+	PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+	2 PHYs.
+
+Example:
+
+	pcie@f2600000 {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+
+		bus-range = <0 0xff>;
+		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
+			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clocks = <&cpm_syscon0 1 13>;
+	};
diff --git a/Bindings/pci/pci-ep.yaml b/Bindings/pci/pci-ep.yaml
new file mode 100644
index 0000000..d1eef48
--- /dev/null
+++ b/Bindings/pci/pci-ep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCI Endpoint Controller
+
+description: |
+  Common properties for PCI Endpoint Controller Nodes.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie-ep@"
+
+  max-functions:
+    description: Maximum number of functions that can be configured
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    default: 1
+    maximum: 255
+
+  max-virtual-functions:
+    description: Array representing the number of virtual functions corresponding to each physical
+      function
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 255
+
+  max-link-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  num-lanes:
+    description: maximum number of lanes
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 1
+    maximum: 16
+
+required:
+  - compatible
+
+additionalProperties: true
diff --git a/Bindings/pci/pci-iommu.txt b/Bindings/pci/pci-iommu.txt
new file mode 100644
index 0000000..0def586
--- /dev/null
+++ b/Bindings/pci/pci-iommu.txt
@@ -0,0 +1,171 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI(e) devices and IOMMU(s).
+
+Each PCI(e) device under a root complex is uniquely identified by its Requester
+ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+IOMMUs may distinguish PCI devices through sideband data derived from the
+Requester ID. While a given PCI device can only master through one IOMMU, a
+root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per
+bus).
+
+The generic 'iommus' property is insufficient to describe this relationship,
+and a mechanism is required to map from a PCI device to its IOMMU and sideband
+data.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
+  data.
+
+  The property is an arbitrary number of tuples of
+  (rid-base,iommu,iommu-base,length).
+
+  Any RID r in the interval [rid-base, rid-base + length) is associated with
+  the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
+
+- iommu-map-mask: A mask to be applied to each Requester ID prior to being
+  mapped to an IOMMU specifier per the iommu-map property.
+
+
+Example (1)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID,
+		 * identity-mapped.
+		 */
+		iommu-map = <0x0 &iommu 0x0 0x10000>;
+	};
+};
+
+
+Example (2)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID with the
+		 * function bits masked out.
+		 */
+		iommu-map = <0x0 &iommu 0x0 0x10000>;
+		iommu-map-mask = <0xfff8>;
+	};
+};
+
+
+Example (3)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID,
+		 * but the high bits of the bus number are flipped.
+		 */
+		iommu-map = <0x0000 &iommu 0x8000 0x8000>,
+			    <0x8000 &iommu 0x0000 0x8000>;
+	};
+};
+
+
+Example (4)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu_a: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	iommu_b: iommu@b {
+		reg = <0xb 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	iommu_c: iommu@c {
+		reg = <0xc 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * Devices with bus number 0-127 are mastered via IOMMU
+		 * a, with sideband data being RID[14:0].
+		 * Devices with bus number 128-255 are mastered via
+		 * IOMMU b, with sideband data being RID[14:0].
+		 * No devices master via IOMMU c.
+		 */
+		iommu-map = <0x0000 &iommu_a 0x0000 0x8000>,
+			    <0x8000 &iommu_b 0x0000 0x8000>;
+	};
+};
diff --git a/Bindings/pci/pci-msi.txt b/Bindings/pci/pci-msi.txt
new file mode 100644
index 0000000..b73d839
--- /dev/null
+++ b/Bindings/pci/pci-msi.txt
@@ -0,0 +1,220 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI devices and MSI controllers.
+
+Each PCI device under a root complex is uniquely identified by its Requester ID
+(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+MSIs may be distinguished in part through the use of sideband data accompanying
+writes. In the case of PCI devices, this sideband data may be derived from the
+Requester ID. A mechanism is required to associate a device with both the MSI
+controllers it can address, and the sideband data that will be associated with
+its writes to those controllers.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- msi-map: Maps a Requester ID to an MSI controller and associated
+  msi-specifier data. The property is an arbitrary number of tuples of
+  (rid-base,msi-controller,msi-base,length), where:
+
+  * rid-base is a single cell describing the first RID matched by the entry.
+
+  * msi-controller is a single phandle to an MSI controller
+
+  * msi-base is an msi-specifier describing the msi-specifier produced for the
+    first RID matched by the entry.
+
+  * length is a single cell describing how many consecutive RIDs are matched
+    following the rid-base.
+
+  Any RID r in the interval [rid-base, rid-base + length) is associated with
+  the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
+
+- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
+  to an msi-specifier per the msi-map property.
+
+- msi-parent: Describes the MSI parent of the root complex itself. Where
+  the root complex and MSI controller do not pass sideband data with MSI
+  writes, this property may be used to describe the MSI controller(s)
+  used by PCI devices under the root complex, if defined as such in the
+  binding for the root complex.
+
+
+Example (1)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, identity-mapped.
+		 */
+		msi-map = <0x0 &msi_a 0x0 0x10000>,
+	};
+};
+
+
+Example (2)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, masked to only the device and function bits.
+		 */
+		msi-map = <0x0 &msi_a 0x0 0x100>,
+		msi-map-mask = <0xff>
+	};
+};
+
+
+Example (3)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, but the high bit of the bus number is
+		 * ignored.
+		 */
+		msi-map = <0x0000 &msi 0x0000 0x8000>,
+			  <0x8000 &msi 0x0000 0x8000>;
+	};
+};
+
+
+Example (4)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, but the high bit of the bus number is
+		 * negated.
+		 */
+		msi-map = <0x0000 &msi 0x8000 0x8000>,
+			  <0x8000 &msi 0x0000 0x8000>;
+	};
+};
+
+
+Example (5)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi_a: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	msi_b: msi-controller@b {
+		reg = <0xb 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	msi_c: msi-controller@c {
+		reg = <0xc 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to MSI controller a is the
+		 * RID, but the high bit of the bus number is negated.
+		 * The sideband data provided to MSI controller b is the
+		 * RID, identity-mapped.
+		 * MSI controller c is not addressable.
+		 */
+		msi-map = <0x0000 &msi_a 0x8000 0x08000>,
+			  <0x8000 &msi_a 0x0000 0x08000>,
+			  <0x0000 &msi_b 0x0000 0x10000>;
+	};
+};
diff --git a/Bindings/pci/pci.txt b/Bindings/pci/pci.txt
new file mode 100644
index 0000000..6a8f287
--- /dev/null
+++ b/Bindings/pci/pci.txt
@@ -0,0 +1,84 @@
+PCI bus bridges have standardized Device Tree bindings:
+
+PCI Bus Binding to: IEEE Std 1275-1994
+https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
+
+And for the interrupt mapping part:
+
+Open Firmware Recommended Practice: Interrupt Mapping
+https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.
+- max-link-speed:
+   If present this property specifies PCI gen for link capability.  Host
+   drivers could add this as a strategy to avoid unnecessary operation for
+   unsupported link speed, for instance, trying to do training for
+   unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
+   for gen2, and '1' for gen1. Any other values are invalid.
+- reset-gpios:
+   If present this property specifies PERST# GPIO. Host drivers can parse the
+   GPIO and apply fundamental reset to endpoints.
+- supports-clkreq:
+   If present this property specifies that CLKREQ signal routing exists from
+   root port to downstream device and host bridge drivers can do programming
+   which depends on CLKREQ signal existence. For example, programming root port
+   not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
+
+PCI-PCI Bridge properties
+-------------------------
+
+PCIe root ports and switch ports may be described explicitly in the device
+tree, as children of the host bridge node. Even though those devices are
+discoverable by probing, it might be necessary to describe properties that
+aren't provided by standard PCIe capabilities.
+
+Required properties:
+
+- reg:
+   Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994
+   document, it is a five-cell address encoded as (phys.hi phys.mid
+   phys.lo size.hi size.lo). phys.hi should contain the device's BDF as
+   0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero.
+
+   The bus number is defined by firmware, through the standard bridge
+   configuration mechanism. If this port is a switch port, then firmware
+   allocates the bus number and writes it into the Secondary Bus Number
+   register of the bridge directly above this port. Otherwise, the bus
+   number of a root port is the first number in the bus-range property,
+   defaulting to zero.
+
+   If firmware leaves the ARI Forwarding Enable bit set in the bridge
+   above this port, then phys.hi contains the 8-bit function number as
+   0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification
+   recommends that firmware only leaves ARI enabled when it knows that the
+   OS is ARI-aware.
+
+Optional properties:
+
+- external-facing:
+   When present, the port is external-facing. All bridges and endpoints
+   downstream of this port are external to the machine. The OS can, for
+   example, use this information to identify devices that cannot be
+   trusted with relaxed DMA protection, as users could easily attach
+   malicious devices to this port.
+
+Example:
+
+pcie@10000000 {
+	compatible = "pci-host-ecam-generic";
+	...
+	pcie@0008 {
+		/* Root port 00:01.0 is external-facing */
+		reg = <0x00000800 0 0 0 0>;
+		external-facing;
+	};
+};
diff --git a/Bindings/pci/pcie-al.txt b/Bindings/pci/pcie-al.txt
new file mode 100644
index 0000000..2ad1fe4
--- /dev/null
+++ b/Bindings/pci/pcie-al.txt
@@ -0,0 +1,46 @@
+* Amazon Annapurna Labs PCIe host bridge
+
+Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
+PCI core. It inherits common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Properties of the host controller node that differ from it are:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Value should contain
+			- "amazon,al-alpine-v2-pcie" for alpine_v2
+			- "amazon,al-alpine-v3-pcie" for alpine_v3
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Must include the following entries
+			- "config"	PCIe ECAM space
+			- "controller"	AL proprietary registers
+			- "dbi"		Designware PCIe registers
+
+Example:
+
+	pcie-external0: pcie@fb600000 {
+		compatible = "amazon,al-alpine-v3-pcie";
+		reg = <0x0 0xfb600000 0x0 0x00100000
+		       0x0 0xfd800000 0x0 0x00010000
+		       0x0 0xfd810000 0x0 0x00001000>;
+		reg-names = "config", "controller", "dbi";
+		bus-range = <0 255>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0x00 0 0 7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+		ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+	};
diff --git a/Bindings/pci/qcom,pcie-ep.yaml b/Bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 0000000..a223ce0
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdx55-pcie-ep
+          - qcom,sm8450-pcie-ep
+      - items:
+          - const: qcom,sdx65-pcie-ep
+          - const: qcom,sdx55-pcie-ep
+
+  reg:
+    items:
+      - description: Qualcomm-specific PARF configuration registers
+      - description: DesignWare PCIe registers
+      - description: External local bus interface registers
+      - description: Address Translation Unit (ATU) registers
+      - description: Memory region used to map remote RC address space
+      - description: BAR memory region
+
+  reg-names:
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: atu
+      - const: addr_space
+      - const: mmio
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    maxItems: 8
+
+  qcom,perst-regs:
+    description: Reference to a syscon representing TCSR followed by the two
+                 offsets within syscon for Perst enable and Perst separation
+                 enable registers
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Syscon to TCSR system registers
+          - description: Perst enable offset
+          - description: Perst separation enable offset
+
+  interrupts:
+    items:
+      - description: PCIe Global interrupt
+      - description: PCIe Doorbell interrupt
+
+  interrupt-names:
+    items:
+      - const: global
+      - const: doorbell
+
+  reset-gpios:
+    description: GPIO used as PERST# input signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO used as WAKE# output signal
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: core
+
+  power-domains:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pciephy
+
+  num-lanes:
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+  - interconnects
+  - interconnect-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - $ref: pci-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Sleep clock
+            - description: PCIe Reference clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: sleep
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Reference clock
+            - description: PCIe DDRSS SF TBU clock
+            - description: PCIe AGGRE NOC AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: ref
+            - const: ddrss_sf_tbu
+            - const: aggre_noc_axi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sdx55.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie_ep: pcie-ep@1c00000 {
+        compatible = "qcom,sdx55-pcie-ep";
+        reg = <0x01c00000 0x3000>,
+              <0x40000000 0xf1d>,
+              <0x40000f20 0xc8>,
+              <0x40001000 0x1000>,
+              <0x40002000 0x1000>,
+              <0x01c03000 0x3000>;
+        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                    "mmio";
+
+        clocks = <&gcc GCC_PCIE_AUX_CLK>,
+             <&gcc GCC_PCIE_CFG_AHB_CLK>,
+             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+             <&gcc GCC_PCIE_SLEEP_CLK>,
+             <&gcc GCC_PCIE_0_CLKREF_CLK>;
+        clock-names = "aux", "cfg", "bus_master", "bus_slave",
+                      "slave_q2a", "sleep", "ref";
+
+        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "global", "doorbell";
+        interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
+                        <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
+        interconnect-names = "pcie-mem", "cpu-pcie";
+        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+        resets = <&gcc GCC_PCIE_BCR>;
+        reset-names = "core";
+        power-domains = <&gcc PCIE_GDSC>;
+        phys = <&pcie0_lane>;
+        phy-names = "pciephy";
+        max-link-speed = <3>;
+        num-lanes = <2>;
+    };
diff --git a/Bindings/pci/qcom,pcie.yaml b/Bindings/pci/qcom,pcie.yaml
new file mode 100644
index 0000000..eadba38
--- /dev/null
+++ b/Bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,981 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pcie-apq8064
+          - qcom,pcie-apq8084
+          - qcom,pcie-ipq4019
+          - qcom,pcie-ipq6018
+          - qcom,pcie-ipq8064
+          - qcom,pcie-ipq8064-v2
+          - qcom,pcie-ipq8074
+          - qcom,pcie-ipq8074-gen3
+          - qcom,pcie-msm8996
+          - qcom,pcie-qcs404
+          - qcom,pcie-sa8540p
+          - qcom,pcie-sa8775p
+          - qcom,pcie-sc7280
+          - qcom,pcie-sc8180x
+          - qcom,pcie-sc8280xp
+          - qcom,pcie-sdm845
+          - qcom,pcie-sdx55
+          - qcom,pcie-sm8150
+          - qcom,pcie-sm8250
+          - qcom,pcie-sm8350
+          - qcom,pcie-sm8450-pcie0
+          - qcom,pcie-sm8450-pcie1
+          - qcom,pcie-sm8550
+      - items:
+          - const: qcom,pcie-msm8998
+          - const: qcom,pcie-msm8996
+
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    maxItems: 2
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 5
+        reg-names:
+          minItems: 4
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sc8280xp
+              - qcom,pcie-sdx55
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: pipe # Pipe Clock driving internal logic
+            - const: aux # Auxiliary (AUX) clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8350
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 8
+        clock-names:
+          minItems: 7
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr # Aggre NoC PCIe AXI clock
+            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+        resets:
+          minItems: 1
+          maxItems: 2
+        reset-names:
+          minItems: 1
+          items:
+            - const: pci # PCIe core reset
+            - const: link_down # PCIe link down reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr_4 # NoC aggregate 4 clock
+            - const: noc_aggr_south_sf # NoC aggregate South SF clock
+            - const: cnoc_qx # Configuration NoC QX clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdx55
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: sleep # PCIe Sleep clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8775p
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc8280xp
+    then:
+      required:
+        - interconnects
+        - interconnect-names
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-ipq8074-gen3
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sdm845
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      oneOf:
+        - properties:
+            interrupts:
+              maxItems: 1
+            interrupt-names:
+              items:
+                - const: msi
+        - properties:
+            interrupts:
+              minItems: 8
+            interrupt-names:
+              items:
+                - const: msi0
+                - const: msi1
+                - const: msi2
+                - const: msi3
+                - const: msi4
+                - const: msi5
+                - const: msi6
+                - const: msi7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-apq8084
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064-v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-ipq8074-gen3
+              - qcom,pcie-qcs404
+              - qcom,pcie-sa8540p
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Bindings/pci/ralink,rt3883-pci.txt b/Bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 0000000..ffba4f6
--- /dev/null
+++ b/Bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,187 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+   Required properties:
+
+   - compatible: must be "ralink,rt3883-pci"
+
+   - reg: specifies the physical base address of the controller and
+     the length of the memory mapped region.
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 1.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 1.
+
+   - ranges: specifies the translation between child address space and parent
+     address space
+
+  Optional properties:
+
+   - status: indicates the operational status of the device.
+     Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+   The main node must have two child nodes which describes the built-in
+   interrupt controller and the PCI host bridge.
+
+   a) Interrupt controller:
+
+   Required properties:
+
+   - interrupt-controller: identifies the node as an interrupt controller
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0. As such, 'interrupt-map' nodes do not
+     have to specify a parent unit address.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - interrupts: specifies the interrupt source of the parent interrupt
+     controller. The format of the interrupt specifier depends on the
+     parent interrupt controller.
+
+   b) PCI host bridge:
+
+   Required properties:
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 2.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - device_type: must be "pci"
+
+   - bus-range: PCI bus numbers covered
+
+   - ranges: specifies the ranges for the PCI memory and I/O regions
+
+   - interrupt-map-mask,
+   - interrupt-map: standard PCI properties to define the mapping of the
+     PCI interface to interrupt numbers.
+
+   The PCI host bridge node might have additional sub-nodes representing
+   the onboard PCI devices/PCI slots. Each such sub-node must have the
+   following mandatory properties:
+
+     - reg: used only for interrupt mapping, so only the first four bytes
+       are used to refer to the correct bus number and device number.
+
+     - device_type: must be "pci"
+
+   If a given sub-node represents a PCI bridge it must have following
+   mandatory properties as well:
+
+     - #address-cells: must be set to <3>
+
+     - #size-cells: must set to <2>
+
+     - #interrupt-cells: must be set to <1>
+
+     - interrupt-map-mask,
+     - interrupt-map: standard PCI properties to define the mapping of the
+       PCI interface to interrupt numbers.
+
+   Besides the required properties the sub-nodes may have these optional
+   properties:
+
+     - status: indicates the operational status of the sub-node.
+       Value must be either "disabled" or "okay".
+
+3) Example:
+
+   a) SoC specific dtsi file:
+
+	pci@10140000 {
+		compatible = "ralink,rt3883-pci";
+		reg = <0x10140000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges; /* direct mapping */
+
+		status = "disabled";
+
+		pciintc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+		};
+
+		host-bridge {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			device_type = "pci";
+
+			bus-range = <0 255>;
+			ranges = <
+				0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+				0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+			>;
+
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 17 */
+				0x8800 0 0 1 &pciintc 18
+				0x8800 0 0 2 &pciintc 18
+				0x8800 0 0 3 &pciintc 18
+				0x8800 0 0 4 &pciintc 18
+				/* IDSEL 18 */
+				0x9000 0 0 1 &pciintc 19
+				0x9000 0 0 2 &pciintc 19
+				0x9000 0 0 3 &pciintc 19
+				0x9000 0 0 4 &pciintc 19
+			>;
+
+			pci-bridge@1 {
+				reg = <0x0800 0 0 0 0>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				interrupt-map-mask = <0x0 0 0 0>;
+				interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+				status = "disabled";
+			};
+
+			pci-slot@17 {
+				reg = <0x8800 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+
+			pci-slot@18 {
+				reg = <0x9000 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+		};
+	};
+
+   b) Board specific dts file:
+
+	pci@10140000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};
diff --git a/Bindings/pci/rcar-gen4-pci-ep.yaml b/Bindings/pci/rcar-gen4-pci-ep.yaml
new file mode 100644
index 0000000..fe38f62
--- /dev/null
+++ b/Bindings/pci/rcar-gen4-pci-ep.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen4 PCIe Endpoint
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: snps,dw-pcie-ep.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a779f0-pcie-ep   # R-Car S4-8
+      - const: renesas,rcar-gen4-pcie-ep  # R-Car Gen4
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: app
+      - const: phy
+      - const: addr_space
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: sft_ce
+      - const: app
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pwr
+
+  max-link-speed:
+    maximum: 4
+
+  num-lanes:
+    maximum: 4
+
+  max-functions:
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@e65d0000 {
+            compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep";
+            reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>,
+                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+                  <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+                  <0 0xfe000000 0 0x400000>;
+            reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+            interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "dma", "sft_ce", "app";
+            clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+            clock-names = "core", "ref";
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 624>;
+            reset-names = "pwr";
+            max-link-speed = <4>;
+            num-lanes = <2>;
+            max-functions = /bits/ 8 <2>;
+        };
+    };
diff --git a/Bindings/pci/rcar-gen4-pci-host.yaml b/Bindings/pci/rcar-gen4-pci-host.yaml
new file mode 100644
index 0000000..ffb3433
--- /dev/null
+++ b/Bindings/pci/rcar-gen4-pci-host.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen4 PCIe Host
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a779f0-pcie   # R-Car S4-8
+      - const: renesas,rcar-gen4-pcie  # R-Car Gen4
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: app
+      - const: phy
+      - const: config
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: dma
+      - const: sft_ce
+      - const: app
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pwr
+
+  max-link-speed:
+    maximum: 4
+
+  num-lanes:
+    maximum: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@e65d0000 {
+            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
+            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
+                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+                  <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+                  <0 0xfe000000 0 0x400000>;
+            reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "dma", "sft_ce", "app";
+            clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+            clock-names = "core", "ref";
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 624>;
+            reset-names = "pwr";
+            max-link-speed = <4>;
+            num-lanes = <2>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
+                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
+            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+            snps,enable-cdm-check;
+        };
+    };
diff --git a/Bindings/pci/rcar-pci-ep.yaml b/Bindings/pci/rcar-pci-ep.yaml
new file mode 100644
index 0000000..32a3b76
--- /dev/null
+++ b/Bindings/pci/rcar-pci-ep.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Endpoint
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-pcie-ep     # RZ/G2M
+          - renesas,r8a774b1-pcie-ep     # RZ/G2N
+          - renesas,r8a774c0-pcie-ep     # RZ/G2E
+          - renesas,r8a774e1-pcie-ep     # RZ/G2H
+          - renesas,r8a7795-pcie-ep      # R-Car H3
+      - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: memory0
+      - const: memory1
+      - const: memory2
+      - const: memory3
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pcie
+
+  max-functions:
+    minimum: 1
+    maximum: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - resets
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a774c0-sysc.h>
+
+     pcie0_ep: pcie-ep@fe000000 {
+            compatible = "renesas,r8a774c0-pcie-ep",
+                         "renesas,rcar-gen3-pcie-ep";
+            reg = <0xfe000000 0x80000>,
+                  <0xfe100000 0x100000>,
+                  <0xfe200000 0x200000>,
+                  <0x30000000 0x8000000>,
+                  <0x38000000 0x8000000>;
+            reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&cpg 319>;
+            power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+            clocks = <&cpg CPG_MOD 319>;
+            clock-names = "pcie";
+            max-functions = /bits/ 8 <1>;
+    };
diff --git a/Bindings/pci/rcar-pci-host.yaml b/Bindings/pci/rcar-pci-host.yaml
new file mode 100644
index 0000000..8fdfbc7
--- /dev/null
+++ b/Bindings/pci/rcar-pci-host.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Host
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,pcie-r8a7779       # R-Car H1
+      - items:
+          - enum:
+              - renesas,pcie-r8a7742      # RZ/G1H
+              - renesas,pcie-r8a7743      # RZ/G1M
+              - renesas,pcie-r8a7744      # RZ/G1N
+              - renesas,pcie-r8a7790      # R-Car H2
+              - renesas,pcie-r8a7791      # R-Car M2-W
+              - renesas,pcie-r8a7793      # R-Car M2-N
+          - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pcie-r8a774a1     # RZ/G2M
+              - renesas,pcie-r8a774b1     # RZ/G2N
+              - renesas,pcie-r8a774c0     # RZ/G2E
+              - renesas,pcie-r8a774e1     # RZ/G2H
+              - renesas,pcie-r8a7795      # R-Car H3
+              - renesas,pcie-r8a7796      # R-Car M3-W
+              - renesas,pcie-r8a77961     # R-Car M3-W+
+              - renesas,pcie-r8a77965     # R-Car M3-N
+              - renesas,pcie-r8a77980     # R-Car V3H
+              - renesas,pcie-r8a77990     # R-Car E3
+          - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,pcie-r8a7779
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@fe000000 {
+            compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
+            reg = <0 0xfe000000 0 0x80000>;
+             #address-cells = <3>;
+             #size-cells = <2>;
+             bus-range = <0x00 0xff>;
+             device_type = "pci";
+             ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+                      <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+                      <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+                      <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+             dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
+                          <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+             interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+             #interrupt-cells = <1>;
+             interrupt-map-mask = <0 0 0 0>;
+             interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+             clock-names = "pcie", "pcie_bus";
+             power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+             resets = <&cpg 319>;
+         };
+    };
diff --git a/Bindings/pci/renesas,pci-rcar-gen2.yaml b/Bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 0000000..5a0d64d
--- /dev/null
+++ b/Bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  This is the bridge used internally to connect the USB controllers to the
+  AHB. There is one bridge instance per USB port connected to the internal
+  OHCI and EHCI controllers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,pci-r8a7742      # RZ/G1H
+              - renesas,pci-r8a7743      # RZ/G1M
+              - renesas,pci-r8a7744      # RZ/G1N
+              - renesas,pci-r8a7745      # RZ/G1E
+              - renesas,pci-r8a7790      # R-Car H2
+              - renesas,pci-r8a7791      # R-Car M2-W
+              - renesas,pci-r8a7793      # R-Car M2-N
+              - renesas,pci-r8a7794      # R-Car E2
+          - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
+
+  reg:
+    items:
+      - description: Operational registers for the OHCI/EHCI controllers.
+      - description: Bridge configuration and control registers.
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  bus-range:
+    description: |
+      The PCI bus number range; as this is a single bus, the range
+      should be specified as the same value twice.
+
+  dma-ranges:
+    description: |
+      A single range for the inbound memory region. If not supplied,
+      defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+      the allowed combinations of address and size.
+    maxItems: 1
+
+patternProperties:
+  '^usb@[0-1],0$':
+    type: object
+
+    description:
+      This a USB controller PCI device
+
+    properties:
+      reg:
+        description:
+          Identify the correct bus, device and function number in the
+          form <bdf 0 0 0 0>.
+
+        items:
+          minItems: 5
+          maxItems: 5
+
+      phys:
+        description:
+          Reference to the USB phy
+        maxItems: 1
+
+      phy-names:
+        maxItems: 1
+
+    required:
+      - reg
+      - phys
+      - phy-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - power-domains
+  - bus-range
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,pci-rzn1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Internal bus clock (AHB) for HOST
+            - description: Internal bus clock (AHB) Power Management
+            - description: PCI clock for USB subsystem
+        clock-names:
+          items:
+            - const: hclkh
+            - const: hclkpm
+            - const: pciclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Device clock
+        clock-names:
+          items:
+            - const: pclk
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    pci@ee090000  {
+        compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+        device_type = "pci";
+        reg = <0xee090000 0xc00>,
+              <0xee080000 0x1100>;
+        clocks = <&cpg CPG_MOD 703>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 703>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-range = <0 0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+        dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        usb@1,0 {
+            reg = <0x800 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+
+        usb@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+    };
diff --git a/Bindings/pci/rockchip,rk3399-pcie-common.yaml b/Bindings/pci/rockchip,rk3399-pcie-common.yaml
new file mode 100644
index 0000000..a8574f8
--- /dev/null
+++ b/Bindings/pci/rockchip,rk3399-pcie-common.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Bridge Common Properties
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+properties:
+  reg:
+    maxItems: 2
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: aclk-perf
+      - const: hclk
+      - const: pm
+
+  num-lanes:
+    maximum: 4
+
+  phys:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  phy-names:
+    oneOf:
+      - const: pcie-phy
+      - items:
+          - const: pcie-phy-0
+          - const: pcie-phy-1
+          - const: pcie-phy-2
+          - const: pcie-phy-3
+
+  resets:
+    maxItems: 7
+
+  reset-names:
+    items:
+      - const: core
+      - const: mgmt
+      - const: mgmt-sticky
+      - const: pipe
+      - const: pm
+      - const: pclk
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+additionalProperties: true
+
+...
diff --git a/Bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Bindings/pci/rockchip,rk3399-pcie-ep.yaml
new file mode 100644
index 0000000..6b62f6f
--- /dev/null
+++ b/Bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Endpoint
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie-ep
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: mem-base
+
+  rockchip,max-outbound-regions:
+    description: Maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 32
+    default: 32
+
+required:
+  - rockchip,max-outbound-regions
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@f8000000 {
+            compatible = "rockchip,rk3399-pcie-ep";
+            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
+            reg-names = "apb-base", "mem-base";
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            max-functions = /bits/ 8 <8>;
+            num-lanes = <4>;
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+            phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+            rockchip,max-outbound-regions = <16>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreqnb_cpm>;
+        };
+    };
+...
diff --git a/Bindings/pci/rockchip,rk3399-pcie.yaml b/Bindings/pci/rockchip,rk3399-pcie.yaml
new file mode 100644
index 0000000..531008f
--- /dev/null
+++ b/Bindings/pci/rockchip,rk3399-pcie.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Root Port Bridge Host
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: axi-base
+      - const: apb-base
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: legacy
+      - const: client
+
+  aspm-no-l0s:
+    description: This property is needed if using 24MHz OSC for RC's PHY.
+
+  ep-gpios:
+    description: pre-reset GPIO
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie1v8-supply:
+    description: The 1.8v regulator to use for PCIe.
+
+  vpcie0v9-supply:
+    description: The 0.9v regulator to use for PCIe.
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+required:
+  - ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-controller
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@f8000000 {
+            compatible = "rockchip,rk3399-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+            interrupt-names = "sys", "legacy", "client";
+            ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+            ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+                0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+            num-lanes = <4>;
+            msi-map = <0x0 &its 0x0 0x1000>;
+            reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
+            reg-names = "axi-base", "apb-base";
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            /* deprecated legacy PHY model */
+            phys = <&pcie_phy>;
+            phy-names = "pcie-phy";
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreq>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+                <0 0 0 2 &pcie0_intc 1>,
+                <0 0 0 3 &pcie0_intc 2>,
+                <0 0 0 4 &pcie0_intc 3>;
+
+            pcie0_intc: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
+...
diff --git a/Bindings/pci/rockchip-dw-pcie.yaml b/Bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000..1ae8dcf
--- /dev/null
+++ b/Bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3568-pcie
+      - items:
+          - enum:
+              - rockchip,rk3588-pcie
+          - const: rockchip,rk3568-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+      - description: Config registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+      - description: PIPE clock
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+      - const: pipe
+
+  interrupts:
+    items:
+      - description:
+          Combined system interrupt, which is used to signal the following
+          interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
+          hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
+          edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
+      - description:
+          Combined PM interrupt, which is used to signal the following
+          interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
+          linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
+          linkst_out_l0s, pm_dstate_update
+      - description:
+          Combined message interrupt, which is used to signal the following
+          interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
+          pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
+      - description:
+          Combined legacy interrupt, which is used to signal the following
+          interrupts - inta, intb, intc, intd
+      - description:
+          Combined error interrupt, which is used to signal the following
+          interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
+          tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
+          nf_err_rx, f_err_rx, radm_qoverflow
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: pmc
+      - const: msg
+      - const: legacy
+      - const: err
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    additionalProperties: false
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      interrupt-controller: true
+
+      interrupts:
+        items:
+          - description: combined legacy interrupt
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+      - interrupts
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - const: pipe
+      - items:
+          - const: pwr
+          - const: pipe
+
+  vpcie3v3-supply: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie";
+            reg = <0x3 0xc0800000 0x0 0x390000>,
+                  <0x0 0xfe280000 0x0 0x10000>,
+                  <0x3 0x80000000 0x0 0x100000>;
+            reg-names = "dbi", "apb", "config";
+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+            };
+        };
+    };
+...
diff --git a/Bindings/pci/samsung,exynos-pcie.yaml b/Bindings/pci/samsung,exynos-pcie.yaml
new file mode 100644
index 0000000..f20ed7e
--- /dev/null
+++ b/Bindings/pci/samsung,exynos-pcie.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe Host Controller
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+description: |+
+  Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos5433-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: External Local Bus interface (ELBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe bridge clock
+      - description: PCIe bus clock
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  phys:
+    maxItems: 1
+
+  vdd10-supply:
+    description:
+      Phandle to a regulator that provides 1.0V power to the PCIe block.
+
+  vdd18-supply:
+    description:
+      Phandle to a regulator that provides 1.8V power to the PCIe block.
+
+  num-lanes:
+    const: 1
+
+  num-viewport:
+    const: 3
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - num-viewport
+  - clocks
+  - clock-names
+  - phys
+  - vdd10-supply
+  - vdd18-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos5433.h>
+
+    pcie: pcie@15700000 {
+        compatible = "samsung,exynos5433-pcie";
+        reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
+        reg-names = "dbi", "elbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+        clock-names = "pcie", "pcie_bus";
+        phys = <&pcie_phy>;
+        pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+        pinctrl-names = "default";
+        num-lanes = <1>;
+        num-viewport = <3>;
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+                 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+        vdd10-supply = <&ldo6_reg>;
+        vdd18-supply = <&ldo7_reg>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Bindings/pci/sifive,fu740-pcie.yaml b/Bindings/pci/sifive,fu740-pcie.yaml
new file mode 100644
index 0000000..844fc71
--- /dev/null
+++ b/Bindings/pci/sifive,fu740-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 PCIe host controller
+
+description: |+
+  SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Greentime Hu <greentime.hu@sifive.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: sifive,fu740-pcie
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: mgmt
+
+  dma-coherent: true
+
+  num-lanes:
+    const: 8
+
+  msi-parent: true
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: inta
+      - const: intb
+      - const: intc
+      - const: intd
+
+  resets:
+    description: A phandle to the PCIe power up reset line.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
+  pwren-gpios:
+    description: Should specify the GPIO for controlling the PCI bus device power on.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - dma-coherent
+  - num-lanes
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+  - resets
+  - pwren-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        #include <dt-bindings/clock/sifive-fu740-prci.h>
+
+        pcie@e00000000 {
+            compatible = "sifive,fu740-pcie";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            reg = <0xe 0x00000000 0x0 0x80000000>,
+                  <0xd 0xf0000000 0x0 0x10000000>,
+                  <0x0 0x100d0000 0x0 0x1000>;
+            reg-names = "dbi", "config", "mgmt";
+            device_type = "pci";
+            dma-coherent;
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000>,      /* I/O */
+                     <0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000>,    /* mem */
+                     <0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000>,    /* mem */
+                     <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;  /* mem prefetchable */
+            num-lanes = <0x8>;
+            interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+            interrupt-names = "msi", "inta", "intb", "intc", "intd";
+            interrupt-parent = <&plic0>;
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                            <0x0 0x0 0x0 0x2 &plic0 58>,
+                            <0x0 0x0 0x0 0x3 &plic0 59>,
+                            <0x0 0x0 0x0 0x4 &plic0 60>;
+            clock-names = "pcie_aux";
+            clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
+            resets = <&prci 4>;
+            pwren-gpios = <&gpio 5 0>;
+            reset-gpios = <&gpio 8 0>;
+        };
+    };
diff --git a/Bindings/pci/snps,dw-pcie-common.yaml b/Bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 0000000..dc05761
--- /dev/null
+++ b/Bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+  Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+  properties.
+
+select: false
+
+properties:
+  reg:
+    description:
+      DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+      Interface - DBI. In accordance with the reference manual the register
+      configuration space belongs to the Configuration-Dependent Module (CDM)
+      and is split up into several sub-parts Standard PCIe configuration
+      space, Port Logic Registers (PL), Shadow Config-space Registers,
+      iATU/eDMA registers. The particular sub-space is selected by the
+      CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+      configuration provides a flexible interface for the system engineers to
+      either map the particular space at a desired MMIO address or just leave
+      them in a contiguous memory space if pure Native or AXI Bridge DBI access
+      is selected. Note the PCIe CFG-space, PL and Shadow registers are
+      specific for each activated function, while the rest of the sub-spaces
+      are common for all of them (if there are more than one).
+    minItems: 2
+    maxItems: 7
+
+  reg-names:
+    minItems: 2
+    maxItems: 7
+
+  interrupts:
+    description:
+      There are two main sub-blocks which are normally capable of
+      generating interrupts. It's System Information Interface and MSI
+      interface. While the former one has some common for the Host and
+      Endpoint controllers IRQ-signals, the later interface is obviously
+      Root Complex specific since it's responsible for the incoming MSI
+      messages signalling. The System Information IRQ signals are mainly
+      responsible for reporting the generic PCIe hierarchy and Root
+      Complex events like VPD IO request, general AER, PME, Hot-plug, link
+      bandwidth change, link equalization request, INTx asserted/deasserted
+      Message detection, embedded DMA Tx/Rx/Error.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+
+  clocks:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the clocks required
+      to get the controller working correctly. In general all of them can
+      be divided into two groups':' application and core clocks. Note the
+      platforms may have some of the clock sources unspecified in case if the
+      corresponding domains are fed up from a common clock source.
+    minItems: 1
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+            interface of the Configuration-Dependent Module, which is
+            basically the set of the controller CSRs.
+          const: dbi
+        - description:
+            Application AXI-bus Master interface clock. Basically this is
+            a clock for the controller DMA interface (PCI-to-CPU).
+          const: mstr
+        - description:
+            Application AXI-bus Slave interface clock. This is a clock for
+            the CPU-to-PCI memory IO interface.
+          const: slv
+        - description:
+            Controller Core-PCS PIPE interface clock. It's normally
+            supplied by an external PCS-PHY.
+          const: pipe
+        - description:
+            Controller Primary clock. It's assumed that all controller input
+            signals (except resets) are synchronous to this clock.
+          const: core
+        - description:
+            Auxiliary clock for the controller PMC domain. The controller
+            partitioning implies having some parts to operate with this
+            clock in some power management states.
+          const: aux
+        - description:
+            Generic reference clock. In case if there are several
+            interfaces fed up with a common clock source it's advisable to
+            define it with this name (for instance pipe, core and aux can
+            be connected to a single source of the periodic signal).
+          const: ref
+        - description:
+            Clock for the PHY registers interface. Originally this is
+            a PHY-viewport-based interface, but some platform may have
+            specifically designed one.
+          const: phy_reg
+        - description:
+            Vendor-specific clock names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'dbi' clock for details
+              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+            - description: See native 'mstr/slv' clock for details
+              enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+            - description: See native 'pipe' clock for details
+              enum: [ pcie_phy, pcie_phy_ref, link ]
+            - description: See native 'aux' clock for details
+              enum: [ pcie_aux ]
+            - description: See native 'ref' clock for details.
+              enum: [ gio ]
+            - description: See nativs 'phy_reg' clock for details
+              enum: [ pcie_apb_phy, pclk ]
+
+  resets:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the reset
+      signals required to be de-asserted to properly activate the controller
+      sub-parts. All of these signals can be divided into two sub-groups':'
+      application and core resets with respect to the main sub-domains they
+      are supposed to reset. Note the platforms may have some of these signals
+      unspecified in case if they are automatically handled or aggregated into
+      a comprehensive control module.
+    minItems: 1
+    maxItems: 10
+
+  reset-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      oneOf:
+        - description: Data Bus Interface (DBI) domain reset
+          const: dbi
+        - description: AXI-bus Master interface reset
+          const: mstr
+        - description: AXI-bus Slave interface reset
+          const: slv
+        - description: Application-dependent interface reset
+          const: app
+        - description: Controller Non-sticky CSR flags reset
+          const: non-sticky
+        - description: Controller sticky CSR flags reset
+          const: sticky
+        - description: PIPE-interface (Core-PCS) logic reset
+          const: pipe
+        - description:
+            Controller primary reset (resets everything except PMC module)
+          const: core
+        - description: PCS/PHY block reset
+          const: phy
+        - description: PMC hot reset signal
+          const: hot
+        - description: Cold reset signal
+          const: pwr
+        - description:
+            Vendor-specific reset names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'app' reset for details
+              enum: [ apps, gio, apb ]
+            - description: See native 'phy' reset for details
+              enum: [ pciephy, link ]
+            - description: See native 'pwr' reset for details
+              enum: [ turnoff ]
+
+  phys:
+    description:
+      There can be up to the number of possible lanes PHYs specified placed in
+      the phandle array in the line-based order. Obviously each the specified
+      PHYs are supposed to be able to work in the PCIe mode with a speed
+      implied by the DWC PCIe controller they are attached to.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    minItems: 1
+    maxItems: 16
+    oneOf:
+      - description: Generic PHY names
+        items:
+          pattern: '^pcie[0-9]+$'
+      - description:
+          Vendor-specific PHY names. Consider using the generic
+          names above for new bindings.
+        items:
+          oneOf:
+            - pattern: '^pcie(-?phy[0-9]*)?$'
+            - pattern: '^p2u-[0-7]$'
+
+  reset-gpio:
+    deprecated: true
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  max-link-speed:
+    maximum: 5
+
+  num-lanes:
+    description:
+      Number of PCIe link lanes to use. Can be omitted if the already brought
+      up link is supposed to be preserved.
+    maximum: 16
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound address translation windows. This parameter can be
+      auto-detected based on the iATU memory writability. So there is no
+      point in having a dedicated DT-property for it.
+    maximum: 256
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of inbound address translation windows. In the same way as
+      for the outbound AT windows, this parameter can be auto-detected based
+      on the iATU memory writability. There is no point having a dedicated
+      DT-property for it either.
+    maximum: 256
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
+  snps,enable-cdm-check:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable automatic checking of CDM (Configuration Dependent Module)
+      registers for data corruption. CDM registers include standard PCIe
+      configuration space registers, Port Logic registers, DMA and iATU
+      registers. This feature has been available since DWC PCIe v4.80a.
+
+  dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/Bindings/pci/snps,dw-pcie-ep.yaml b/Bindings/pci/snps,dw-pcie-ep.yaml
new file mode 100644
index 0000000..bbdb01d
--- /dev/null
+++ b/Bindings/pci/snps,dw-pcie-ep.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe endpoint interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller endpoint
+
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie-ep
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+properties:
+  reg:
+    description:
+      DBI, DBI2 reg-spaces and outbound memory window are required for the
+      normal controller functioning. iATU memory IO region is also required
+      if the space is unrolled (IP-core version >= 4.80a).
+    minItems: 2
+    maxItems: 7
+
+  reg-names:
+    minItems: 2
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to
+            generate various application-specific traffic on the PCIe bus
+            hierarchy. It's usage scenario depends on the endpoint
+            functionality, for instance it can be used to create MSI(X)
+            messages.
+          const: addr_space
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ link, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: addr_space
+
+  interrupts:
+    description:
+      There is no mandatory IRQ signals for the normal controller functioning,
+      but in addition to the native set the platforms may have a link- or
+      PM-related IRQs specified.
+    minItems: 1
+    maxItems: 20
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 20
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+
+  max-functions:
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: true
+
+examples:
+  - |
+    pcie-ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+
+      interrupts = <23>, <24>;
+      interrupt-names = "dma0", "dma1";
+
+      clocks = <&sys_clk 12>, <&sys_clk 24>;
+      clock-names = "dbi", "ref";
+
+      resets = <&sys_rst 12>, <&sys_rst 24>;
+      reset-names = "dbi", "phy";
+
+      phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+      phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+      max-link-speed = <3>;
+      max-functions = /bits/ 8 <4>;
+    };
diff --git a/Bindings/pci/snps,dw-pcie.yaml b/Bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 0000000..022055e
--- /dev/null
+++ b/Bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller
+
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+  - if:
+      not:
+        required:
+          - msi-map
+    then:
+      properties:
+        interrupt-names:
+          contains:
+            const: msi
+
+properties:
+  reg:
+    description:
+      At least DBI reg-space and peripheral devices CFG-space outbound window
+      are required for the normal controller work. iATU memory IO region is
+      also required if the space is unrolled (IP-core version >= 4.80a).
+    minItems: 2
+    maxItems: 7
+
+  reg-names:
+    minItems: 2
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to access
+            the peripheral PCIe devices configuration space.
+          const: config
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ apb, mgmt, link, ulreg, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+            - description: Syscon-related CSR regions.
+              enum: [ smu, mpu ]
+            - description: Tegra234 aperture
+              enum: [ ecam ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: config
+
+  interrupts:
+    description:
+      DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+      signal is supposed to be specified for the host controller.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+            no more MSI interrupt pending. The interrupt is relevant to the
+            iMSI-RX - Integrated MSI Receiver (AXI bridge).
+          const: msi
+        - description:
+            Legacy A/B/C/D interrupt signal. Basically it's triggered by
+            receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+            from the downstream device.
+          pattern: "^int(a|b|c|d)$"
+        - description:
+            Error condition detected and a flag is set in the Root Error Status
+            register of the AER capability. It's asserted when the RC
+            internally generated an error or an error message is received by
+            the RC.
+          const: aer
+        - description:
+            PME message is received by the port. That means having the PME
+            status bit set in the Root Status register (the event is
+            supposed to be unmasked in the Root Control register).
+          const: pme
+        - description:
+            Hot-plug event is detected. That is a bit has been set in the
+            Slot Status register and the corresponding event is enabled in
+            the Slot Control register.
+          const: hp
+        - description:
+            Link Autonomous Bandwidth Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_au
+        - description:
+            Bandwidth Management Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_mg
+        - description:
+            Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for
+            details.
+          const: legacy
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr, sys, pmc, msg, err ]
+
+additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+examples:
+  - |
+    pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      device_type = "pci";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <25>, <24>;
+      interrupt-names = "msi", "hp";
+      #interrupt-cells = <1>;
+
+      reset-gpios = <&port0 0 1>;
+
+      phys = <&pcie_phy>;
+      phy-names = "pcie";
+
+      num-lanes = <1>;
+      max-link-speed = <3>;
+    };
diff --git a/Bindings/pci/socionext,uniphier-pcie-ep.yaml b/Bindings/pci/socionext,uniphier-pcie-ep.yaml
new file mode 100644
index 0000000..f0d8e48
--- /dev/null
+++ b/Bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe endpoint controller
+
+description: |
+  UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-pcie-ep
+      - socionext,uniphier-nx1-pcie-ep
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: link
+      - const: addr_space
+      - const: atu
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  num-ib-windows:
+    const: 16
+
+  num-ob-windows:
+    const: 16
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-ep
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie_ep: pcie-ep@66000000 {
+        compatible = "socionext,uniphier-pro5-pcie-ep";
+        reg-names = "dbi", "dbi2", "link", "addr_space";
+        reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+              <0x66010000 0x10000>, <0x67000000 0x400000>;
+        clock-names = "gio", "link";
+        clocks = <&sys_clk 12>, <&sys_clk 24>;
+        reset-names = "gio", "link";
+        resets = <&sys_rst 12>, <&sys_rst 24>;
+        num-ib-windows = <16>;
+        num-ob-windows = <16>;
+        num-lanes = <4>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+    };
diff --git a/Bindings/pci/socionext,uniphier-pcie.yaml b/Bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 0000000..638b99d
--- /dev/null
+++ b/Bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: dbi
+      - const: link
+      - const: config
+      - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        gic: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupt-parent = <&gic>;
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Bindings/pci/spear13xx-pcie.txt b/Bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 0000000..d5a14f5
--- /dev/null
+++ b/Bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
+controller.
+
+Required properties:
+- compatible	    : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys		    : phandle to PHY node associated with PCIe controller
+- phy-names	    : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
diff --git a/Bindings/pci/ti,am65-pci-ep.yaml b/Bindings/pci/ti,am65-pci-ep.yaml
new file mode 100644
index 0000000..74195c1
--- /dev/null
+++ b/Bindings/pci/ti,am65-pci-ep.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Endpoint
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: pci-ep.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: addr_space
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  interrupts:
+    minItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - power-domains
+  - ti,syscon-pcie-mode
+  - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_ep: pcie-ep@5500000 {
+        compatible = "ti,am654-pcie-ep";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x8000000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "addr_space", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Bindings/pci/ti,am65-pci-host.yaml b/Bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 0000000..a20dccb
--- /dev/null
+++ b/Bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Host
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-rc
+      - ti,keystone-pcie
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: config
+      - const: atu
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
+    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  msi-map: true
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - ti,syscon-pcie-id
+  - ti,syscon-pcie-mode
+  - ranges
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-pcie-rc
+then:
+  required:
+    - dma-coherent
+    - power-domains
+    - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_rc: pcie@5500000 {
+        compatible = "ti,am654-pcie-rc";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x2000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "config", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
+                 <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        bus-range = <0x0 0xff>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+        msi-map = <0x0 &gic_its 0x0 0x10000>;
+        device_type = "pci";
+    };
diff --git a/Bindings/pci/ti,j721e-pci-ep.yaml b/Bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 0000000..6229218
--- /dev/null
+++ b/Bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in AM64
+        items:
+          - const: ti,am64-pcie-ep
+          - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in J7200
+        items:
+          - const: ti,j7200-pcie-ep
+          - const: ti,j721e-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: mem
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@d000000 {
+           compatible = "ti,j721e-pcie-ep";
+           reg = <0x00 0x02900000 0x00 0x1000>,
+                 <0x00 0x02907000 0x00 0x400>,
+                 <0x00 0x0d000000 0x00 0x00800000>,
+                 <0x00 0x10000000 0x00 0x08000000>;
+           reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+           ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+           max-link-speed = <3>;
+           num-lanes = <2>;
+           power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 239 1>;
+           clock-names = "fck";
+           max-functions = /bits/ 8 <6>;
+           dma-coherent;
+           phys = <&serdes0_pcie_link>;
+           phy-names = "pcie-phy";
+       };
+    };
diff --git a/Bindings/pci/ti,j721e-pci-host.yaml b/Bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 0000000..a2c5eae
--- /dev/null
+++ b/Bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: cdns-pcie-host.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-host
+      - description: PCIe controller in AM64
+        items:
+          - const: ti,am64-pcie-host
+          - const: ti,j721e-pcie-host
+      - description: PCIe controller in J7200
+        items:
+          - const: ti,j7200-pcie-host
+          - const: ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: |+
+      clock-specifier to represent input to the PCIe for 1 item.
+      2nd item if present represents reference clock to the connector.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: pcie_refclk
+
+  dma-coherent: true
+
+  vendor-id:
+    const: 0x104c
+
+  device-id:
+    enum:
+      - 0xb00d
+      - 0xb00f
+      - 0xb010
+      - 0xb013
+
+  msi-map: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-ranges
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            vendor-id = <0x104c>;
+            device-id = <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie-phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+        };
+    };
diff --git a/Bindings/pci/ti-pci.txt b/Bindings/pci/ti-pci.txt
new file mode 100644
index 0000000..8147e3e
--- /dev/null
+++ b/Bindings/pci/ti-pci.txt
@@ -0,0 +1,102 @@
+TI PCI Controllers
+
+PCIe DesignWare Controller
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+	       Should be "ti,dra7-pcie-ep" for EP (deprecated)
+	       Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+	       Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+	       Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+	       Should be "ti,dra726-pcie-ep" for dra72x in EP mode
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+			module and the register offset to specify lane
+			selection.
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI-specific registers
+	       The second entry must be "rc-dbics" for the DesignWare PCIe
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI-specific registers
+	       "ep_dbics" for the standard configuration registers as
+		they are locally accessed within the DIF CS space
+	       "ep_dbics2" for the standard configuration registers as
+		they are locally accessed within the DIF CS2 space
+	       "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
+Optional Property:
+ - gpios : Should be added if a GPIO line is required to drive PERST# line
+
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/Bindings/pci/toshiba,visconti-pcie.yaml b/Bindings/pci/toshiba,visconti-pcie.yaml
new file mode 100644
index 0000000..53da2ed
--- /dev/null
+++ b/Bindings/pci/toshiba,visconti-pcie.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC PCIe Host Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: toshiba,visconti-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+      - description: Visconti specific additional registers.
+      - description: Visconti specific SMU registers
+      - description: Visconti specific memory protection unit registers (MPU)
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: ulreg
+      - const: smu
+      - const: mpu
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: PCIe reference clock
+      - description: PCIe system clock
+      - description: Auxiliary clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: core
+      - const: aux
+
+  num-lanes:
+    const: 2
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - num-lanes
+  - clocks
+  - clock-names
+  - max-link-speed
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@28400000 {
+            compatible = "toshiba,visconti-pcie";
+            reg = <0x0 0x28400000 0x0 0x00400000>,
+                  <0x0 0x70000000 0x0 0x10000000>,
+                  <0x0 0x28050000 0x0 0x00010000>,
+                  <0x0 0x24200000 0x0 0x00002000>,
+                  <0x0 0x24162000 0x0 0x00001000>;
+            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            device_type = "pci";
+            bus-range = <0x00 0xff>;
+            num-lanes = <2>;
+            num-viewport = <8>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
+                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map =
+                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
+            clock-names = "ref", "core", "aux";
+            max-link-speed = <2>;
+        };
+    };
+...
diff --git a/Bindings/pci/v3-v360epc-pci.txt b/Bindings/pci/v3-v360epc-pci.txt
new file mode 100644
index 0000000..1106329
--- /dev/null
+++ b/Bindings/pci/v3-v360epc-pci.txt
@@ -0,0 +1,76 @@
+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Required properties:
+- compatible: should be one of:
+  "v3,v360epc-pci"
+  "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain two register areas:
+  first the base address of the V3 host bridge controller, 64KB
+  second the configuration area register space, 16MB
+- interrupts: should contain a reference to the V3 error interrupt
+  as routed on the system.
+- bus-range: see pci.txt
+- ranges: this follows the standard PCI bindings in the IEEE Std
+  1275-1994 (see pci.txt) with the following restriction:
+  - The non-prefetchable and prefetchable memory windows must
+    each be exactly 256MB (0x10000000) in size.
+  - The prefetchable memory window must be immediately adjacent
+    to the non-prefetcable memory window
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
+  64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
+  as pre-fetchable. Two ranges are supported by the hardware.
+
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
+  on the Integrator, some registers in the syscon are required to
+  operate the V3 host bridge.
+
+Example:
+
+pci: pciv3@62000000 {
+	compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+	interrupt-parent = <&pic>;
+	interrupts = <17>; /* Bus error IRQ */
+	clocks = <&pciclk>;
+	bus-range = <0x00 0xff>;
+	ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
+		0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
+		0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+		0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+		0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+		0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+	dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+		0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+		0x02000000 0 0x80000000 /* Core module alias memory */
+		0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+	interrupt-map-mask = <0xf800 0 0 0x7>;
+	interrupt-map = <
+	/* IDSEL 9 */
+	0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+	0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+	0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+	0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+	/* IDSEL 10 */
+	0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+	0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+	0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+	0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+	/* IDSEL 11 */
+	0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+	0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+	0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+	0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+	/* IDSEL 12 */
+	0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+	0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+	0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+	0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+	>;
+};
diff --git a/Bindings/pci/versatile.yaml b/Bindings/pci/versatile.yaml
new file mode 100644
index 0000000..09748ef
--- /dev/null
+++ b/Bindings/pci/versatile.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Platform Baseboard PCI interface
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  PCI host controller found on the ARM Versatile PB board's FPGA.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-pci
+
+  reg:
+    items:
+      - description: Versatile-specific registers
+      - description: Self Config space
+      - description: Config space
+
+  ranges:
+    maxItems: 3
+
+  "#interrupt-cells": true
+
+  interrupt-map:
+    maxItems: 16
+
+  interrupt-map-mask:
+    items:
+      - const: 0x1800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@10001000 {
+      compatible = "arm,versatile-pci";
+      device_type = "pci";
+      reg = <0x10001000 0x1000>,
+            <0x41000000 0x10000>,
+            <0x42000000 0x100000>;
+      bus-range = <0 0xff>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      ranges =
+          <0x01000000 0 0x00000000 0x43000000 0 0x00010000>,  /* downstream I/O */
+          <0x02000000 0 0x50000000 0x50000000 0 0x10000000>,  /* non-prefetchable memory */
+          <0x42000000 0 0x60000000 0x60000000 0 0x10000000>;  /* prefetchable memory */
+
+      interrupt-map-mask = <0x1800 0 0 7>;
+      interrupt-map = <0x1800 0 0 1 &sic 28>,
+          <0x1800 0 0 2 &sic 29>,
+          <0x1800 0 0 3 &sic 30>,
+          <0x1800 0 0 4 &sic 27>,
+
+          <0x1000 0 0 1 &sic 27>,
+          <0x1000 0 0 2 &sic 28>,
+          <0x1000 0 0 3 &sic 29>,
+          <0x1000 0 0 4 &sic 30>,
+
+          <0x0800 0 0 1 &sic 30>,
+          <0x0800 0 0 2 &sic 27>,
+          <0x0800 0 0 3 &sic 28>,
+          <0x0800 0 0 4 &sic 29>,
+
+          <0x0000 0 0 1 &sic 29>,
+          <0x0000 0 0 2 &sic 30>,
+          <0x0000 0 0 3 &sic 27>,
+          <0x0000 0 0 4 &sic 28>;
+    };
+
+
+...
diff --git a/Bindings/pci/xgene-pci-msi.txt b/Bindings/pci/xgene-pci-msi.txt
new file mode 100644
index 0000000..85d9b95
--- /dev/null
+++ b/Bindings/pci/xgene-pci-msi.txt
@@ -0,0 +1,68 @@
+* AppliedMicro X-Gene v1 PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "apm,xgene1-msi" to identify
+	      X-Gene v1 PCIe MSI controller block.
+- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
+- reg: physical base address (0x79000000) and length (0x900000) for controller
+       registers. These registers include the MSI termination address and data
+       registers as well as the MSI interrupt status registers.
+- reg-names: not required
+- interrupts: A list of 16 interrupt outputs of the controller, starting from
+	      interrupt number 0x10 to 0x1f.
+- interrupt-names: not required
+
+Each PCIe node needs to have property msi-parent that points to an MSI
+controller node
+
+Examples:
+
+SoC DTSI:
+
+	+ MSI node:
+	msi@79000000 {
+		compatible = "apm,xgene1-msi";
+		msi-controller;
+		reg = <0x00 0x79000000 0x0 0x900000>;
+		interrupts = 	<0x0 0x10 0x4>
+				<0x0 0x11 0x4>
+				<0x0 0x12 0x4>
+				<0x0 0x13 0x4>
+				<0x0 0x14 0x4>
+				<0x0 0x15 0x4>
+				<0x0 0x16 0x4>
+				<0x0 0x17 0x4>
+				<0x0 0x18 0x4>
+				<0x0 0x19 0x4>
+				<0x0 0x1a 0x4>
+				<0x0 0x1b 0x4>
+				<0x0 0x1c 0x4>
+				<0x0 0x1d 0x4>
+				<0x0 0x1e 0x4>
+				<0x0 0x1f 0x4>;
+	};
+
+	+ PCIe controller node with msi-parent property pointing to MSI node:
+	pcie0: pcie@1f2b0000 {
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+		msi-parent= <&msi>;
+	};
diff --git a/Bindings/pci/xgene-pci.txt b/Bindings/pci/xgene-pci.txt
new file mode 100644
index 0000000..9249033
--- /dev/null
+++ b/Bindings/pci/xgene-pci.txt
@@ -0,0 +1,50 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "apm,xgene-pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+       registers. Must contain an entry for each entry in the reg-names
+       property.
+- reg-names: Must include the following entries:
+  "csr": controller configuration registers.
+  "cfg": PCIe configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+	pcie0: pcie@1f2b0000 {
+		status = "disabled";
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+	};
+
diff --git a/Bindings/pci/xilinx-versal-cpm.yaml b/Bindings/pci/xilinx-versal-cpm.yaml
new file mode 100644
index 0000000..4734be4
--- /dev/null
+++ b/Bindings/pci/xilinx-versal-cpm.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPM Host Controller device tree for Xilinx Versal SoCs
+
+maintainers:
+  - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-cpm-host-1.00
+      - xlnx,versal-cpm5-host
+
+  reg:
+    items:
+      - description: CPM system level control and status registers.
+      - description: Configuration space region and bridge registers.
+      - description: CPM5 control and status registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: cpm_slcr
+      - const: cfg
+      - const: cpm_csr
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  msi-map:
+    description:
+      Maps a Requester ID to an MSI controller and associated MSI sideband data.
+
+  ranges:
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+      "#interrupt-cells":
+        const: 1
+      "interrupt-controller": true
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - bus-range
+  - msi-map
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    versal {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cpm_pcie: pcie@fca10000 {
+                       compatible = "xlnx,versal-cpm-host-1.00";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                                       <0 0 0 2 &pcie_intc_0 1>,
+                                       <0 0 0 3 &pcie_intc_0 2>,
+                                       <0 0 0 4 &pcie_intc_0 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x0 0xfca10000 0x0 0x1000>,
+                             <0x6 0x00000000 0x0 0x10000000>;
+                       reg-names = "cpm_slcr", "cfg";
+                       pcie_intc_0: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+               cpm5_pcie: pcie@fcdd0000 {
+                       compatible = "xlnx,versal-cpm5-host";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                                       <0 0 0 2 &pcie_intc_1 1>,
+                                       <0 0 0 3 &pcie_intc_1 2>,
+                                       <0 0 0 4 &pcie_intc_1 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                             <0x06 0x00000000 0x00 0x1000000>,
+                             <0x00 0xfce20000 0x00 0x1000000>;
+                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+                       pcie_intc_1: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+    };
diff --git a/Bindings/pci/xlnx,axi-pcie-host.yaml b/Bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 0000000..69b7dec
--- /dev/null
+++ b/Bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,axi-pcie-host-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pcie@50000000 {
+        compatible = "xlnx,axi-pcie-host-1.00.a";
+        reg = <0x50000000 0x1000000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &pcie_intc 1>,
+                        <0 0 0 2 &pcie_intc 2>,
+                        <0 0 0 3 &pcie_intc 3>,
+                        <0 0 0 4 &pcie_intc 4>;
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #address-cells = <0>;
+            #interrupt-cells = <1>;
+        };
+    };
diff --git a/Bindings/pci/xlnx,nwl-pcie.yaml b/Bindings/pci/xlnx,nwl-pcie.yaml
new file mode 100644
index 0000000..426f90a
--- /dev/null
+++ b/Bindings/pci/xlnx,nwl-pcie.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,nwl-pcie-2.11
+
+  reg:
+    items:
+      - description: PCIe bridge registers location.
+      - description: PCIe Controller registers location.
+      - description: PCIe Configuration space region.
+
+  reg-names:
+    items:
+      - const: breg
+      - const: pcireg
+      - const: cfg
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received
+      - description: unused interrupt(dummy)
+      - description: interrupt asserted when a legacy interrupt is received
+      - description: msi1 interrupt asserted when an MSI is received
+      - description: msi0 interrupt asserted when an MSI is received
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: dummy
+      - const: intx
+      - const: msi1
+      - const: msi0
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  "#interrupt-cells":
+    const: 1
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-map:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent:
+    description: optional, only needed if DMA operations are coherent.
+
+  clocks:
+    maxItems: 1
+    description: optional, input clock specifier.
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      "interrupt-controller": true
+
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-controller
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        nwl_pcie: pcie@fd0e0000 {
+            compatible = "xlnx,nwl-pcie-2.11";
+            reg = <0x0 0xfd0e0000 0x0 0x1000>,
+                  <0x0 0xfd480000 0x0 0x1000>,
+                  <0x80 0x00000000 0x0 0x10000000>;
+            reg-names = "breg", "pcireg", "cfg";
+            ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                     <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            msi-controller;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "dummy", "intx", "msi1", "msi0";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+                            <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+                            <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+                            <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+            msi-parent = <&nwl_pcie>;
+            power-domains = <&zynqmp_firmware PD_PCIE>;
+            iommus = <&smmu 0x4d0>;
+            pcie_intc: legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
diff --git a/Bindings/pci/xlnx,xdma-host.yaml b/Bindings/pci/xlnx,xdma-host.yaml
new file mode 100644
index 0000000..0aa00b8
--- /dev/null
+++ b/Bindings/pci/xlnx,xdma-host.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx XDMA PL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xdma-host-3.00
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received.
+      - description: msi0 interrupt asserted when an MSI is received.
+      - description: msi1 interrupt asserted when an MSI is received.
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: msi0
+      - const: msi1
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  interrupt-map:
+    maxItems: 4
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@a0000000 {
+            compatible = "xlnx,xdma-host-3.00";
+            reg = <0x0 0xa0000000 0x0 0x10000000>;
+            ranges = <0x2000000 0x0 0xb0000000 0x0 0xb0000000 0x0 0x1000000>,
+                     <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "msi0", "msi1";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                            <0 0 0 2 &pcie_intc_0 1>,
+                            <0 0 0 3 &pcie_intc_0 2>,
+                            <0 0 0 4 &pcie_intc_0 3>;
+            pcie_intc_0: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+            };
+        };
+    };