Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/pci/rockchip-dw-pcie.yaml b/Bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000..1ae8dcf
--- /dev/null
+++ b/Bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+ - Simon Xue <xxm@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+ RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+ PCIe IP and thus inherits all the common properties defined in
+ snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3568-pcie
+ - items:
+ - enum:
+ - rockchip,rk3588-pcie
+ - const: rockchip,rk3568-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers
+ - description: Rockchip designed configuration registers
+ - description: Config registers
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: apb
+ - const: config
+
+ clocks:
+ minItems: 5
+ items:
+ - description: AHB clock for PCIe master
+ - description: AHB clock for PCIe slave
+ - description: AHB clock for PCIe dbi
+ - description: APB clock for PCIe
+ - description: Auxiliary clock for PCIe
+ - description: PIPE clock
+
+ clock-names:
+ minItems: 5
+ items:
+ - const: aclk_mst
+ - const: aclk_slv
+ - const: aclk_dbi
+ - const: pclk
+ - const: aux
+ - const: pipe
+
+ interrupts:
+ items:
+ - description:
+ Combined system interrupt, which is used to signal the following
+ interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
+ hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
+ edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
+ - description:
+ Combined PM interrupt, which is used to signal the following
+ interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
+ linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
+ linkst_out_l0s, pm_dstate_update
+ - description:
+ Combined message interrupt, which is used to signal the following
+ interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
+ pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
+ - description:
+ Combined legacy interrupt, which is used to signal the following
+ interrupts - inta, intb, intc, intd
+ - description:
+ Combined error interrupt, which is used to signal the following
+ interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
+ tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
+ nf_err_rx, f_err_rx, radm_qoverflow
+
+ interrupt-names:
+ items:
+ - const: sys
+ - const: pmc
+ - const: msg
+ - const: legacy
+ - const: err
+
+ legacy-interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ additionalProperties: false
+ properties:
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller: true
+
+ interrupts:
+ items:
+ - description: combined legacy interrupt
+ required:
+ - "#address-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+ - interrupts
+
+ msi-map: true
+
+ num-lanes: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ power-domains:
+ maxItems: 1
+
+ ranges:
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - const: pipe
+ - items:
+ - const: pwr
+ - const: pipe
+
+ vpcie3v3-supply: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - msi-map
+ - num-lanes
+ - phys
+ - phy-names
+ - power-domains
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie3x2: pcie@fe280000 {
+ compatible = "rockchip,rk3568-pcie";
+ reg = <0x3 0xc0800000 0x0 0x390000>,
+ <0x0 0xfe280000 0x0 0x10000>,
+ <0x3 0x80000000 0x0 0x100000>;
+ reg-names = "dbi", "apb", "config";
+ bus-range = <0x20 0x2f>;
+ clocks = <&cru 143>, <&cru 144>,
+ <&cru 145>, <&cru 146>,
+ <&cru 147>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ linux,pci-domain = <2>;
+ max-link-speed = <2>;
+ msi-map = <0x2000 &its 0x2000 0x1000>;
+ num-lanes = <2>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power 15>;
+ ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+ <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+ resets = <&cru 193>;
+ reset-names = "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+ };
+...