Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/pci/layerscape-pcie-gen4.txt b/Bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 0000000..b40fb5d
--- /dev/null
+++ b/Bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+ "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+ "csr_axi_slave": Bridge config registers
+ "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+ "intr": The interrupt that is asserted for controller interrupts
+ "aer": Asserted for aer interrupt when chip support the aer interrupt with
+ none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+ "pme": Asserted for pme interrupt when chip support the pme interrupt with
+ none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+ of the data transferred from/to the IP block. This can avoid the software
+ cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+ pcie@3400000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ dma-coherent;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ };