diff --git a/Bindings/nvmem/nvmem.yaml b/Bindings/nvmem/nvmem.yaml
new file mode 100644
index 0000000..4fd015d
--- /dev/null
+++ b/Bindings/nvmem/nvmem.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory)
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding is intended to represent the location of hardware
+  configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+  On a significant proportion of boards, the manufacturer has stored
+  some data on NVMEM, for the OS to be able to retrieve these
+  information and act upon it. Obviously, the OS has to know about
+  where to retrieve these data from, and where they are stored on the
+  storage device.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  read-only:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the provider as read only.
+
+  wp-gpios:
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+      The write-protect GPIO is asserted, when it's driven high
+      (logical '1') to block the write operation. It's deasserted,
+      when it's driven low (logical '0') to allow writing.
+    maxItems: 1
+
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+    description:
+      Alternative to the statically defined nvmem cells, this
+      container may reference more advanced (dynamic) layout
+      parsers.
+
+additionalProperties: true
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      qfprom: eeprom@700000 {
+          compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          reg = <0x00700000 0x100000>;
+
+          wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+
+          /* ... */
+
+          nvmem-layout {
+              compatible = "fixed-layout";
+              #address-cells = <1>;
+              #size-cells = <1>;
+
+              /* Data cells */
+              tsens_calibration: calib@404 {
+                  reg = <0x404 0x10>;
+              };
+
+              tsens_calibration_bckp: calib_bckp@504 {
+                  reg = <0x504 0x11>;
+                  bits = <6 128>;
+              };
+
+              pvs_version: pvs-version@6 {
+                  reg = <0x6 0x2>;
+                  bits = <7 2>;
+              };
+
+              speed_bin: speed-bin@c{
+                  reg = <0xc 0x1>;
+                  bits = <2 3>;
+              };
+          };
+      };
+
+...