diff --git a/Bindings/net/faraday,ftgmac100.yaml b/Bindings/net/faraday,ftgmac100.yaml
new file mode 100644
index 0000000..9bcbacb
--- /dev/null
+++ b/Bindings/net/faraday,ftgmac100.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGMAC100 gigabit ethernet controller
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Po-Yu Chuang <ratbert@faraday-tech.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftgmac100
+      - items:
+          - enum:
+              - aspeed,ast2400-mac
+              - aspeed,ast2500-mac
+              - aspeed,ast2600-mac
+          - const: faraday,ftgmac100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: MAC IP clock
+      - description: RMII RCLK gate for AST2500/2600
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: MACCLK
+      - const: RCLK
+
+  phy-mode:
+    enum:
+      - rgmii
+      - rmii
+
+  phy-handle: true
+
+  use-ncsi:
+    description:
+      Use the NC-SI stack instead of an MDIO PHY. Currently assumes
+      rmii (100bT) but kept as a separate property in case NC-SI grows support
+      for a gigabit link.
+    type: boolean
+
+  no-hw-checksum:
+    description:
+      Used to disable HW checksum support. Here for backward
+      compatibility as the driver now should have correct defaults based on
+      the SoC.
+    type: boolean
+    deprecated: true
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@1e660000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e660000 0x180>;
+        interrupts = <2>;
+        use-ncsi;
+    };
+
+    ethernet@1e680000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e680000 0x180>;
+        interrupts = <2>;
+
+        phy-handle = <&phy>;
+        phy-mode = "rgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };