Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/mmc/mtk-sd.yaml b/Bindings/mmc/mtk-sd.yaml
new file mode 100644
index 0000000..3fffa46
--- /dev/null
+++ b/Bindings/mmc/mtk-sd.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTK MSDC Storage Host Controller
+
+maintainers:
+ - Chaotian Jing <chaotian.jing@mediatek.com>
+ - Wenbin Mei <wenbin.mei@mediatek.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-mmc
+ - mediatek,mt2712-mmc
+ - mediatek,mt6779-mmc
+ - mediatek,mt6795-mmc
+ - mediatek,mt7620-mmc
+ - mediatek,mt7622-mmc
+ - mediatek,mt7986-mmc
+ - mediatek,mt8135-mmc
+ - mediatek,mt8173-mmc
+ - mediatek,mt8183-mmc
+ - mediatek,mt8516-mmc
+ - items:
+ - const: mediatek,mt7623-mmc
+ - const: mediatek,mt2701-mmc
+ - items:
+ - enum:
+ - mediatek,mt8186-mmc
+ - mediatek,mt8188-mmc
+ - mediatek,mt8192-mmc
+ - mediatek,mt8195-mmc
+ - mediatek,mt8365-mmc
+ - const: mediatek,mt8183-mmc
+
+ reg:
+ minItems: 1
+ items:
+ - description: base register (required).
+ - description: top base register (required for MT8183).
+
+ clocks:
+ description:
+ Should contain phandle for the clock feeding the MMC controller.
+ minItems: 2
+ maxItems: 7
+
+ clock-names:
+ minItems: 2
+ maxItems: 7
+
+ interrupts:
+ description:
+ Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+ interrupt is required and be configured as wakeup source irq.
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: msdc
+ - const: sdio_wakeup
+
+ pinctrl-names:
+ description:
+ Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+ will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+ scenario.
+ minItems: 2
+ items:
+ - const: default
+ - const: state_uhs
+ - const: state_eint
+
+ pinctrl-0:
+ description:
+ should contain default/high speed pin ctrl.
+ maxItems: 1
+
+ pinctrl-1:
+ description:
+ should contain uhs mode pin ctrl.
+ maxItems: 1
+
+ pinctrl-2:
+ description:
+ should switch dat1 pin to GPIO mode.
+ maxItems: 1
+
+ hs400-ds-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS400 DS delay setting.
+ minimum: 0
+ maximum: 0xffffffff
+
+ mediatek,hs200-cmd-int-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS200 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+ minimum: 0
+ maximum: 31
+
+ mediatek,hs400-cmd-int-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS400 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+ minimum: 0
+ maximum: 31
+
+ mediatek,hs400-cmd-resp-sel-rising:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ HS400 command response sample selection.
+ If present, HS400 command responses are sampled on rising edges.
+ If not present, HS400 command responses are sampled on falling edges.
+
+ mediatek,hs400-ds-dly3:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Gear of the third delay line for DS for input data latch in data
+ pad macro, there are 32 stages from 0 to 31.
+ For different corner IC, the time is different about one step, it is
+ about 100ps.
+ The value is confirmed by doing scan and calibration to find a best
+ value with corner IC and it is valid only for HS400 mode.
+ minimum: 0
+ maximum: 31
+
+ mediatek,latch-ck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
+ data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
+ if not present, default value is 0.
+ applied to compatible "mediatek,mt2701-mmc".
+ minimum: 0
+ maximum: 7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: hrst
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pinctrl-names
+ - pinctrl-0
+ - pinctrl-1
+ - vmmc-supply
+ - vqmmc-supply
+
+allOf:
+ - $ref: mmc-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-mmc
+ - mediatek,mt6779-mmc
+ - mediatek,mt6795-mmc
+ - mediatek,mt7620-mmc
+ - mediatek,mt7622-mmc
+ - mediatek,mt7623-mmc
+ - mediatek,mt8135-mmc
+ - mediatek,mt8173-mmc
+ - mediatek,mt8183-mmc
+ - mediatek,mt8186-mmc
+ - mediatek,mt8188-mmc
+ - mediatek,mt8195-mmc
+ - mediatek,mt8516-mmc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: source clock
+ - description: HCLK which used for host
+ - description: independent source clock gate
+ clock-names:
+ minItems: 2
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt2712-mmc
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ items:
+ - description: source clock
+ - description: HCLK which used for host
+ - description: independent source clock gate
+ - description: bus clock used for internal register access (required for MSDC0/3).
+ clock-names:
+ minItems: 3
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+ - const: bus_clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8183-mmc
+ then:
+ properties:
+ reg:
+ minItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt7986-mmc
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ items:
+ - description: source clock
+ - description: HCLK which used for host
+ - description: independent source clock gate
+ - description: bus clock used for internal register access (required for MSDC0/3).
+ - description: msdc subsys clock gate
+ clock-names:
+ minItems: 3
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+ - const: bus_clk
+ - const: sys_cg
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - mediatek,mt8186-mmc
+ - mediatek,mt8188-mmc
+ - mediatek,mt8195-mmc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: source clock
+ - description: HCLK which used for host
+ - description: independent source clock gate
+ - description: crypto clock used for data encrypt/decrypt (optional)
+ clock-names:
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+ - const: crypto
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8192-mmc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: source clock
+ - description: HCLK which used for host
+ - description: independent source clock gate
+ - description: msdc subsys clock gate
+ - description: peripheral bus clock gate
+ - description: AXI bus clock gate
+ - description: AHB bus clock gate
+ clock-names:
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+ - const: sys_cg
+ - const: pclk_cg
+ - const: axi_cg
+ - const: ahb_cg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8173-mmc";
+ reg = <0x11230000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+ vmmc-supply = <&mt6397_vemc_3v3_reg>;
+ vqmmc-supply = <&mt6397_vio18_reg>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+ clock-names = "source", "hclk";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ hs400-ds-delay = <0x14015>;
+ mediatek,hs200-cmd-int-delay = <26>;
+ mediatek,hs400-cmd-int-delay = <14>;
+ mediatek,hs400-cmd-resp-sel-rising;
+ };
+
+ mmc3: mmc@11260000 {
+ compatible = "mediatek,mt8173-mmc";
+ reg = <0x11260000 0x1000>;
+ clock-names = "source", "hclk";
+ clocks = <&pericfg CLK_PERI_MSDC30_3>,
+ <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+ interrupt-names = "msdc", "sdio_wakeup";
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+ <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "state_uhs", "state_eint";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_uhs>;
+ pinctrl-2 = <&mmc2_pins_eint>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ keep-power-in-suspend;
+ wakeup-source;
+ cap-sdio-irq;
+ no-mmc;
+ no-sd;
+ non-removable;
+ vmmc-supply = <&sdio_fixed_3v3>;
+ vqmmc-supply = <&mt6397_vgp3_reg>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ };
+
+...