diff --git a/Bindings/mfd/samsung,s5m8767.yaml b/Bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 0000000..aea0b7d
--- /dev/null
+++ b/Bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S5M8767 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s5m8767-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s5m8767.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  s5m8767,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck3-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck3 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck4-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck4 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck-ds-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+      It is one-to-one mapped to dvs gpio lines.
+
+  s5m8767,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: buck2 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck3-uses-gpio-dvs:
+    type: boolean
+    description: buck3 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck4-uses-gpio-dvs:
+    type: boolean
+    description: buck4 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  s5m8767,pmic-buck-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for dvs.
+
+  vinb1-supply:
+    description: Power supply for buck1
+  vinb2-supply:
+    description: Power supply for buck2
+  vinb3-supply:
+    description: Power supply for buck3
+  vinb4-supply:
+    description: Power supply for buck4
+  vinb5-supply:
+    description: Power supply for buck5
+  vinb6-supply:
+    description: Power supply for buck6
+  vinb7-supply:
+    description: Power supply for buck7
+  vinb8-supply:
+    description: Power supply for buck8
+  vinb9-supply:
+    description: Power supply for buck9
+
+  vinl1-supply:
+    description: Power supply for LDO3, LDO10, LDO26, LDO27
+  vinl2-supply:
+    description: Power supply for LDO13, LDO16, LDO25, LDO28
+  vinl3-supply:
+    description: Power supply for LDO11, LDO14
+  vinl4-supply:
+    description: Power supply for LDO4, LDO9
+  vinl5-supply:
+    description: Power supply for LDO12, LDO17, LDO19, LDO23
+  vinl6-supply:
+    description: Power supply for LDO18, LDO20, LDO21, LDO24
+  vinl7-supply:
+    description: Power supply for LDO5, LDO22
+  vinl8-supply:
+    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
+  vinl9-supply:
+    description: Power supply for LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+  - not:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-default-dvs-idx = <3>;
+            s5m8767,pmic-buck2-uses-gpio-dvs;
+
+            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+                                             <1100000>, <1100000>,
+                                             <1000000>, <1000000>,
+                                             <1000000>, <1000000>;
+
+            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };