Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/mfd/da9062.txt b/Bindings/mfd/da9062.txt
new file mode 100644
index 0000000..e4eedd3
--- /dev/null
+++ b/Bindings/mfd/da9062.txt
@@ -0,0 +1,124 @@
+* Dialog DA9062 Power Management Integrated Circuit (PMIC)
+
+Product information for the DA9062 and DA9061 devices can be found here:
+- https://www.dialog-semiconductor.com/products/da9062
+- https://www.dialog-semiconductor.com/products/da9061
+
+The DA9062 PMIC consists of:
+
+Device Supply Names Description
+------ ------------ -----------
+da9062-regulator : : LDOs & BUCKs
+da9062-rtc : : Real-Time Clock
+da9062-onkey : : On Key
+da9062-watchdog : : Watchdog Timer
+da9062-thermal : : Thermal
+da9062-gpio : : GPIOs
+
+The DA9061 PMIC consists of:
+
+Device Supply Names Description
+------ ------------ -----------
+da9062-regulator : : LDOs & BUCKs
+da9062-onkey : : On Key
+da9062-watchdog : : Watchdog Timer
+da9062-thermal : : Thermal
+
+======
+
+Required properties:
+
+- compatible : Should be
+ "dlg,da9062" for DA9062
+ "dlg,da9061" for DA9061
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+ modified to match the chip's OTP settings).
+
+Optional properties:
+
+- gpio-controller : Marks the device as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify the gpio polarity.
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
+GPIO bindings.
+
+- interrupts : IRQ line information.
+- interrupt-controller
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+further information on IRQ bindings.
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs.
+ The DA9062 regulators are bound using their names listed below:
+
+ buck1 : BUCK_1
+ buck2 : BUCK_2
+ buck3 : BUCK_3
+ buck4 : BUCK_4
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+
+ The DA9061 regulators are bound using their names listed below:
+
+ buck1 : BUCK_1
+ buck2 : BUCK_2
+ buck3 : BUCK_3
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+
+ The component follows the standard regulator framework and the bindings
+ details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+ regulator-initial-mode may be specified for buck regulators using mode values
+ from include/dt-bindings/regulator/dlg,da9063-regulator.h.
+
+- rtc : This node defines settings required for the Real-Time Clock associated
+ with the DA9062. There are currently no entries in this binding, however
+ compatible = "dlg,da9062-rtc" should be added if a node is created.
+
+- onkey : See ../input/da9062-onkey.txt
+
+- watchdog: See ../watchdog/da9062-wdt.txt
+
+- thermal : See ../thermal/da9062-thermal.txt
+
+Example:
+
+ pmic0: da9062@58 {
+ compatible = "dlg,da9062";
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9062-rtc";
+ };
+
+ regulators {
+ DA9062_BUCK1: buck1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+ regulator-boot-on;
+ };
+ DA9062_LDO1: ldo1 {
+ regulator-name = "LDO_1";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
+