Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/leds/skyworks,aat1290.yaml b/Bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 0000000..a6aaa92
--- /dev/null
+++ b/Bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+ asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+ respectively. In order to add a capability of selecting the strobe signal
+ source (e.g. CPU or camera sensor) there is an additional switch required,
+ independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+ compatible:
+ const: skyworks,aat1290
+
+ enset-gpios:
+ maxItems: 1
+ description: EN_SET pin
+
+ flen-gpios:
+ maxItems: 1
+ description: FL_EN pin
+
+ led:
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ led-max-microamp: true
+
+ flash-max-microamp:
+ description: |
+ Maximum flash LED supply current can be calculated using following
+ formula:: I = 1A * 162 kOhm / Rset.
+
+ flash-max-timeout-us:
+ description: |
+ Maximum flash timeout can be calculated using following formula::
+ T = 8.82 * 10^9 * Ct.
+
+ required:
+ - flash-max-microamp
+ - flash-max-timeout-us
+ - led-max-microamp
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: host
+ - const: isp
+
+ pinctrl-0: true
+ pinctrl-1: true
+ pinctrl-2: true
+
+required:
+ - compatible
+ - enset-gpios
+ - flen-gpios
+ - led
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ // Ct = 220 nF, Rset = 160 kOhm
+ led-controller {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <520833>;
+ flash-max-microamp = <1012500>;
+ flash-max-timeout-us = <1940000>;
+ };
+ };