Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Bindings/interrupt-controller/abilis,tb10x-ictl.txt
new file mode 100644
index 0000000..5a4dd26
--- /dev/null
+++ b/Bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -0,0 +1,37 @@
+TB10x Top Level Interrupt Controller
+====================================
+
+The Abilis TB10x SOC contains a custom interrupt controller. It performs
+one-to-one mapping of external interrupt sources to CPU interrupts and
+provides support for reconfigurable trigger modes.
+
+Required properties
+-------------------
+
+- compatible: Should be "abilis,tb10x-ictl"
+- reg: specifies physical base address and size of register range.
+- interrupt-congroller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+ source connected to this controller. The value shall be 2.
+- interrupts: Specifies the list of interrupt lines which are handled by
+ the interrupt controller in the parent controller's notation. Interrupts
+ are mapped one-to-one to parent interrupts.
+
+Example
+-------
+
+intc: interrupt-controller { /* Parent interrupt controller */
+ interrupt-controller;
+ #interrupt-cells = <1>; /* For example below */
+ /* ... */
+};
+
+tb10x_ictl: pic@2000 { /* TB10x interrupt controller */
+ compatible = "abilis,tb10x-ictl";
+ reg = <0x2000 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29 30 31>;
+};
diff --git a/Bindings/interrupt-controller/actions,owl-sirq.yaml b/Bindings/interrupt-controller/actions,owl-sirq.yaml
new file mode 100644
index 0000000..27756d0
--- /dev/null
+++ b/Bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SIRQ interrupt controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+ This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700
+ and S900) and provides support for handling up to 3 external interrupt lines.
+
+properties:
+ compatible:
+ enum:
+ - actions,s500-sirq
+ - actions,s700-sirq
+ - actions,s900-sirq
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the input IRQ number, between 0 and 2, while the second
+ cell is the trigger type as defined in interrupt.txt in this directory.
+
+ interrupts:
+ description: |
+ Contains the GIC SPI IRQs mapped to the external interrupt lines.
+ They shall be specified sequentially from output 0 to 2.
+ minItems: 3
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sirq: interrupt-controller@b01b0200 {
+ compatible = "actions,s500-sirq";
+ reg = <0xb01b0200 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+ };
+
+...
diff --git a/Bindings/interrupt-controller/al,alpine-msix.txt b/Bindings/interrupt-controller/al,alpine-msix.txt
new file mode 100644
index 0000000..5669764
--- /dev/null
+++ b/Bindings/interrupt-controller/al,alpine-msix.txt
@@ -0,0 +1,25 @@
+Alpine MSIX controller
+
+See arm,gic-v3.txt for SPI and MSI definitions.
+
+Required properties:
+
+- compatible: should be "al,alpine-msix"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- msi-controller: identifies the node as an PCI Message Signaled Interrupt
+ controller
+- al,msi-base-spi: SPI base of the MSI frame
+- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
+
+Example:
+
+msix: msix {
+ compatible = "al,alpine-msix";
+ reg = <0x0 0xfbe00000 0x0 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ msi-controller;
+ al,msi-base-spi = <160>;
+ al,msi-num-spis = <160>;
+};
diff --git a/Bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
new file mode 100644
index 0000000..a713633
--- /dev/null
+++ b/Bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Interrupt Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ "#interrupt-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-ic
+ - allwinner,suniv-f1c100s-ic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ intc: interrupt-controller@1c20400 {
+ compatible = "allwinner,sun4i-a10-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
new file mode 100644
index 0000000..4fa6fd4
--- /dev/null
+++ b/Bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ "#interrupt-cells":
+ const: 3
+ description:
+ The first cell is GIC_SPI (0), the second cell is the IRQ number, and
+ the third cell is the trigger type as defined in interrupt.txt in this
+ directory.
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun6i-a31-r-intc
+ - items:
+ - enum:
+ - allwinner,sun8i-a83t-r-intc
+ - allwinner,sun8i-h3-r-intc
+ - allwinner,sun50i-a64-r-intc
+ - const: allwinner,sun6i-a31-r-intc
+ - const: allwinner,sun50i-h6-r-intc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description:
+ The GIC interrupt labeled as "External NMI".
+
+ interrupt-controller: true
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ r_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun50i-a64-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x01f00c00 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
new file mode 100644
index 0000000..8360318
--- /dev/null
+++ b/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Non-Maskable Interrupt Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell the trigger
+ type as defined in interrupt.txt in this directory.
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun6i-a31-sc-nmi
+ deprecated: true
+ - const: allwinner,sun7i-a20-sc-nmi
+ - items:
+ - const: allwinner,sun8i-v3s-nmi
+ - const: allwinner,sun9i-a80-nmi
+ - const: allwinner,sun9i-a80-nmi
+ - items:
+ - const: allwinner,sun50i-a100-nmi
+ - const: allwinner,sun9i-a80-nmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ interrupt-controller@1c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 0 4>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/amazon,al-fic.txt b/Bindings/interrupt-controller/amazon,al-fic.txt
new file mode 100644
index 0000000..c676b03
--- /dev/null
+++ b/Bindings/interrupt-controller/amazon,al-fic.txt
@@ -0,0 +1,27 @@
+Amazon's Annapurna Labs Fabric Interrupt Controller
+
+Required properties:
+
+- compatible: should be "amazon,al-fic"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells : must be 2. Specifies the number of cells needed to encode
+ an interrupt source. Supported trigger types are low-to-high edge
+ triggered and active high level-sensitive.
+- interrupts: describes which input line in the interrupt parent, this
+ fic's output is connected to. This field property depends on the parent's
+ binding
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+amazon_fic: interrupt-controller@fd8a8500 {
+ compatible = "amazon,al-fic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0xfd8a8500 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 0000000..3d06db9
--- /dev/null
+++ b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Meson SoCs contains an interrupt controller which is able to watch the SoC
+ pads and generate an interrupt on edge or level. The controller is essentially
+ a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+ edge or level and polarity. It does not expose all 256 mux inputs because the
+ documentation shows that the upper part is not mapped to any pad. The actual
+ number of interrupts exposed depends on the SoC.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,meson-gpio-intc
+ - items:
+ - enum:
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-a1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - amlogic,c3-gpio-intc
+ - const: amlogic,meson-gpio-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ amlogic,channel-interrupts:
+ description: Array with the upstream hwirq numbers
+ minItems: 8
+ maxItems: 12
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x9880 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
diff --git a/Bindings/interrupt-controller/apple,aic.yaml b/Bindings/interrupt-controller/apple,aic.yaml
new file mode 100644
index 0000000..698588e
--- /dev/null
+++ b/Bindings/interrupt-controller/apple,aic.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller
+
+maintainers:
+ - Hector Martin <marcan@marcan.st>
+
+description: |
+ The Apple Interrupt Controller is a simple interrupt controller present on
+ Apple ARM SoC platforms, including various iPhone and iPad devices and the
+ "Apple Silicon" Macs.
+
+ It provides the following features:
+
+ - Level-triggered hardware IRQs wired to SoC blocks
+ - Single mask bit per IRQ
+ - Per-IRQ affinity setting
+ - Automatic masking on event delivery (auto-ack)
+ - Software triggering (ORed with hw line)
+ - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
+ if not symmetric)
+ - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+ higher priority)
+ - Automatic masking on ack
+ - Default "this CPU" register view and explicit per-CPU views
+
+ This device also represents the FIQ interrupt sources on platforms using AIC,
+ which do not go through a discrete interrupt controller.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: apple,t8103-aic
+ - const: apple,aic
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 3
+ description: |
+ The 1st cell contains the interrupt type:
+ - 0: Hardware IRQ
+ - 1: FIQ
+
+ The 2nd cell contains the interrupt number.
+ - HW IRQs: interrupt number
+ - FIQs:
+ - 0: physical HV timer
+ - 1: virtual HV timer
+ - 2: physical guest timer
+ - 3: virtual guest timer
+ - 4: 'efficient' CPU PMU
+ - 5: 'performance' CPU PMU
+
+ The 3rd cell contains the interrupt flags. This is normally
+ IRQ_TYPE_LEVEL_HIGH (4).
+
+ reg:
+ description: |
+ Specifies base physical address and size of the AIC registers.
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ affinities:
+ type: object
+ additionalProperties: false
+ description:
+ FIQ affinity can be expressed as a single "affinities" node,
+ containing a set of sub-nodes, one per FIQ with a non-default
+ affinity.
+ patternProperties:
+ "^.+-affinity$":
+ type: object
+ additionalProperties: false
+ properties:
+ apple,fiq-index:
+ description:
+ The interrupt number specified as a FIQ, and for which
+ the affinity is not the default.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 5
+
+ cpus:
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - apple,fiq-index
+ - cpus
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aic: interrupt-controller@23b100000 {
+ compatible = "apple,t8103-aic", "apple,aic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x2 0x3b100000 0x0 0x8000>;
+ };
+ };
diff --git a/Bindings/interrupt-controller/apple,aic2.yaml b/Bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 0000000..2bde6cc
--- /dev/null
+++ b/Bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+ - Hector Martin <marcan@marcan.st>
+
+description: |
+ The Apple Interrupt Controller 2 is a simple interrupt controller present on
+ Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+ It provides the following features:
+
+ - Level-triggered hardware IRQs wired to SoC blocks
+ - Single mask bit per IRQ
+ - Automatic masking on event delivery (auto-ack)
+ - Software triggering (ORed with hw line)
+ - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+ higher priority)
+ - Automatic masking on ack
+ - Support for multiple dies
+
+ This device also represents the FIQ interrupt sources on platforms using AIC,
+ which do not go through a discrete interrupt controller. It also handles
+ FIQ-based Fast IPIs.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t8112-aic
+ - apple,t6000-aic
+ - const: apple,aic2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ minimum: 3
+ maximum: 4
+ description: |
+ The 1st cell contains the interrupt type:
+ - 0: Hardware IRQ
+ - 1: FIQ
+
+ The 2nd cell contains the die ID (only present on apple,t6000-aic).
+
+ The next cell contains the interrupt number.
+ - HW IRQs: interrupt number
+ - FIQs:
+ - 0: physical HV timer
+ - 1: virtual HV timer
+ - 2: physical guest timer
+ - 3: virtual guest timer
+
+ The last cell contains the interrupt flags. This is normally
+ IRQ_TYPE_LEVEL_HIGH (4).
+
+ reg:
+ items:
+ - description: Address and size of the main AIC2 registers.
+ - description: Address and size of the AIC2 Event register.
+
+ reg-names:
+ items:
+ - const: core
+ - const: event
+
+ power-domains:
+ maxItems: 1
+
+ affinities:
+ type: object
+ additionalProperties: false
+ description:
+ FIQ affinity can be expressed as a single "affinities" node,
+ containing a set of sub-nodes, one per FIQ with a non-default
+ affinity.
+ patternProperties:
+ "^.+-affinity$":
+ type: object
+ additionalProperties: false
+ properties:
+ apple,fiq-index:
+ description:
+ The interrupt number specified as a FIQ, and for which
+ the affinity is not the default.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 5
+
+ cpus:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - apple,fiq-index
+ - cpus
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: apple,t8112-aic
+ then:
+ properties:
+ '#interrupt-cells':
+ const: 3
+ else:
+ properties:
+ '#interrupt-cells':
+ const: 4
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aic: interrupt-controller@28e100000 {
+ compatible = "apple,t6000-aic", "apple,aic2";
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ reg = <0x2 0x8e100000 0x0 0xc000>,
+ <0x2 0x8e10c000 0x0 0x4>;
+ reg-names = "core", "event";
+ };
+ };
diff --git a/Bindings/interrupt-controller/arm,gic-v3.yaml b/Bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 0000000..0f4a062
--- /dev/null
+++ b/Bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,316 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+ - Marc Zyngier <maz@kernel.org>
+
+description: |
+ AArch64 SMP cores are often associated with a GICv3, providing Private
+ Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+ Software Generated Interrupts (SGI), and Locality-specific Peripheral
+ Interrupts (LPI).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,msm8996-gic-v3
+ - const: arm,gic-v3
+ - const: arm,gic-v3
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1, 2 ]
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ "#interrupt-cells":
+ description: |
+ Specifies the number of cells needed to encode an interrupt source.
+ Must be a single cell with a value of at least 3.
+ If the system requires describing PPI affinity, then the value must
+ be at least 4.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts, 2 for interrupts in the Extended SPI range, 3 for the
+ Extended PPI range. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15]. Extended SPI interrupts are in the range [0-1023].
+ Extended PPI interrupts are in the range [0-127].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ The 4th cell is a phandle to a node describing a set of CPUs this
+ interrupt is affine to. The interrupt must be a PPI, and the node
+ pointed must be a subnode of the "ppi-partitions" subnode. For
+ interrupt types other than PPI or PPIs that are not partitionned,
+ this cell must be zero. See the "ppi-partitions" node description
+ below.
+
+ Cells 5 and beyond are reserved for future use and must have a value
+ of 0 if present.
+ enum: [ 3, 4 ]
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional, but must be described if the CPUs
+ support them. Examples of such CPUs are ARM's implementations of the
+ ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+ A73 (this list is not exhaustive).
+
+ minItems: 2
+ maxItems: 4096 # Should be enough?
+
+ interrupts:
+ description:
+ Interrupt source of the VGIC maintenance interrupt.
+ maxItems: 1
+
+ redistributor-stride:
+ description:
+ If using padding pages, specifies the stride of consecutive
+ redistributors. Must be a multiple of 64kB.
+ $ref: /schemas/types.yaml#/definitions/uint64
+ multipleOf: 0x10000
+ exclusiveMinimum: 0
+
+ "#redistributor-regions":
+ description:
+ The number of independent contiguous regions occupied by the
+ redistributors. Required if more than one such region is present.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 4096
+
+ dma-noncoherent:
+ description:
+ Present if the GIC redistributors permit programming shareability
+ and cacheability attributes but are connected to a non-coherent
+ downstream interconnect.
+
+ msi-controller:
+ description:
+ Only present if the Message Based Interrupt functionality is
+ being exposed by the HW, and the mbi-ranges property present.
+
+ mbi-ranges:
+ description:
+ A list of pairs <intid span>, where "intid" is the first SPI of a range
+ that can be used an MBI, and "span" the size of that range. Multiple
+ ranges can be provided.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ mbi-alias:
+ description:
+ Address property. Base address of an alias of the GICD region containing
+ only the {SET,CLR}SPI registers to be used if isolation is required,
+ and if supported by the HW.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 1
+ maxItems: 2
+
+ ppi-partitions:
+ type: object
+ additionalProperties: false
+ description:
+ PPI affinity can be expressed as a single "ppi-partitions" node,
+ containing a set of sub-nodes.
+ patternProperties:
+ "^interrupt-partition-[0-9]+$":
+ type: object
+ additionalProperties: false
+ properties:
+ affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Should be a list of phandles to CPU nodes (as described in
+ Documentation/devicetree/bindings/arm/cpus.yaml).
+
+ required:
+ - affinity
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: aclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ mediatek,broken-save-restore-fw:
+ type: boolean
+ description:
+ Asserts that the firmware on this device has issues saving and restoring
+ GICR registers when the GIC redistributors are powered off.
+
+dependencies:
+ mbi-ranges: [ msi-controller ]
+ msi-controller: [ mbi-ranges ]
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^gic-its@": false
+ "^interrupt-controller@[0-9a-f]+$": false
+ # msi-controller is preferred, but allow other names
+ "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+ type: object
+ description:
+ GICv3 has one or more Interrupt Translation Services (ITS) that are
+ used to route Message Signalled Interrupts (MSI) to the CPUs.
+ properties:
+ compatible:
+ const: arm,gic-v3-its
+
+ dma-noncoherent:
+ description:
+ Present if the GIC ITS permits programming shareability and
+ cacheability attributes but is connected to a non-coherent
+ downstream interconnect.
+
+ msi-controller: true
+
+ "#msi-cells":
+ description:
+ The single msi-cell is the DeviceID of the device which will generate
+ the MSI.
+ const: 1
+
+ reg:
+ description:
+ Specifies the base physical address and size of the ITS registers.
+ maxItems: 1
+
+ socionext,synquacer-pre-its:
+ description:
+ (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - compatible
+ - msi-controller
+ - "#msi-cells"
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x2f000000 0x10000>, // GICD
+ <0x2f100000 0x200000>, // GICR
+ <0x2c000000 0x2000>, // GICC
+ <0x2c010000 0x2000>, // GICH
+ <0x2c020000 0x2000>; // GICV
+ interrupts = <1 9 4>;
+
+ msi-controller;
+ mbi-ranges = <256 128>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+ };
+
+ - |
+ interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x2c010000 0x10000>, // GICD
+ <0x2d000000 0x800000>, // GICR 1: CPUs 0-31
+ <0x2e000000 0x800000>, // GICR 2: CPUs 32-63
+ <0x2c040000 0x2000>, // GICC
+ <0x2c060000 0x2000>, // GICH
+ <0x2c080000 0x2000>; // GICV
+ interrupts = <1 9 4 0>;
+
+ msi-controller@2c200000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c200000 0x20000>;
+ };
+
+ msi-controller@2c400000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x2c400000 0x20000>;
+ };
+
+ ppi-partitions {
+ part0: interrupt-partition-0 {
+ affinity = <&cpu0>, <&cpu2>;
+ };
+
+ part1: interrupt-partition-1 {
+ affinity = <&cpu1>, <&cpu3>;
+ };
+ };
+ };
+
+
+ device@0 {
+ reg = <0 4>;
+ interrupts = <1 1 4 &part0>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/arm,gic.yaml b/Bindings/interrupt-controller/arm,gic.yaml
new file mode 100644
index 0000000..a2846e4
--- /dev/null
+++ b/Bindings/interrupt-controller/arm,gic.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller v1 and v2
+
+maintainers:
+ - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |+
+ ARM SMP cores are often associated with a GIC, providing per processor
+ interrupts (PPI), shared processor interrupts (SPI) and software
+ generated interrupts (SGI).
+
+ Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+ Secondary GICs are cascaded into the upward interrupt controller and do not
+ have PPIs or SGIs.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - arm,arm11mp-gic
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
+ - arm,cortex-a5-gic
+ - arm,cortex-a9-gic
+ - arm,eb11mp-gic
+ - arm,gic-400
+ - arm,pl390
+ - arm,tc11mp-gic
+ - qcom,msm-8660-qgic
+ - qcom,msm-qgic2
+
+ - items:
+ - const: arm,gic-400
+ - enum:
+ - arm,cortex-a15-gic
+ - arm,cortex-a7-gic
+
+ - items:
+ - const: arm,arm1176jzf-devchip-gic
+ - const: arm,arm11mp-gic
+
+ - items:
+ - const: brcm,brahma-b15-gic
+ - const: arm,cortex-a15-gic
+
+ - oneOf:
+ - const: nvidia,tegra210-agic
+ - items:
+ - enum:
+ - nvidia,tegra186-agic
+ - nvidia,tegra194-agic
+ - nvidia,tegra234-agic
+ - const: nvidia,tegra210-agic
+
+ interrupt-controller: true
+
+ "#address-cells":
+ enum: [ 0, 1, 2 ]
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered (invalid for SPIs)
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive (invalid for SPIs).
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+ Also note that the configurability of PPI interrupts is IMPLEMENTATION
+ DEFINED and as such not guaranteed to be present (most SoC available
+ in 2014 seem to ignore the setting of this flag and use the hardware
+ default value).
+
+ reg:
+ description: |
+ Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region
+ is the GIC cpu interface register base and size.
+
+ For GICv2 with virtualization extensions, additional regions are
+ required for specifying the base physical address and size of the VGIC
+ registers. The first additional region is the GIC virtual interface
+ control register base and size. The 2nd additional region is the GIC
+ virtual cpu interface register base and size.
+ minItems: 2
+ maxItems: 4
+
+ ranges: true
+
+ interrupts:
+ description: Interrupt source of the parent interrupt controller on
+ secondary GICs, or VGIC maintenance interrupt on primary GIC (see
+ below).
+ maxItems: 1
+
+ cpu-offset:
+ description: per-cpu offset within the distributor and cpu interface
+ regions, used when the GIC doesn't have banked registers. The offset
+ is cpu-offset * cpu-nr.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description: List of names for the GIC clock input(s). Valid clock names
+ depend on the GIC variant.
+ oneOf:
+ - const: ic_clk # for "arm,arm11mp-gic"
+ - const: PERIPHCLKEN # for "arm,cortex-a15-gic"
+ - items: # for "arm,cortex-a9-gic"
+ - const: PERIPHCLK
+ - const: PERIPHCLKEN
+ - const: clk # for "arm,gic-400" and "nvidia,tegra210"
+ - const: gclk # for "arm,pl390"
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^v2m@[0-9a-f]+$":
+ type: object
+ description: |
+ * GICv2m extension for MSI/MSI-x support (Optional)
+
+ Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
+ This is enabled by specifying v2m sub-node(s).
+
+ properties:
+ compatible:
+ const: arm,gic-v2m-frame
+
+ msi-controller: true
+
+ reg:
+ maxItems: 1
+ description: GICv2m MSI interface register base and size
+
+ arm,msi-base-spi:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the SPI base of the MSI frame, overriding
+ the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ arm,msi-num-spis:
+ description: When the MSI_TYPER register contains an incorrect value,
+ this property should contain the number of SPIs assigned to the
+ frame, overriding the HW value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - compatible
+ - msi-controller
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ // GICv1
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ - |
+ // GICv2
+ interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x2000>,
+ <0x2c004000 0x2000>,
+ <0x2c006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ - |
+ // GICv2m extension for MSI/MSI-x support
+ interrupt-controller@e1101000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ interrupts = <1 8 0xf04>;
+ ranges = <0 0xe1100000 0x100000>;
+ reg = <0xe1110000 0x01000>,
+ <0xe112f000 0x02000>,
+ <0xe1140000 0x10000>,
+ <0xe1160000 0x10000>;
+
+ v2m0: v2m@80000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x80000 0x1000>;
+ };
+
+ //...
+
+ v2mN: v2m@90000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x90000 0x1000>;
+ };
+ };
+...
diff --git a/Bindings/interrupt-controller/arm,nvic.txt b/Bindings/interrupt-controller/arm,nvic.txt
new file mode 100644
index 0000000..386ab37
--- /dev/null
+++ b/Bindings/interrupt-controller/arm,nvic.txt
@@ -0,0 +1,36 @@
+* ARM Nested Vector Interrupt Controller (NVIC)
+
+The NVIC provides an interrupt controller that is tightly coupled to
+Cortex-M based processor cores. The NVIC implemented on different SoCs
+vary in the number of interrupts and priority bits per interrupt.
+
+Main node required properties:
+
+- compatible : should be one of:
+ "arm,v6m-nvic"
+ "arm,v7m-nvic"
+ "arm,v8m-nvic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 2.
+
+ The 1st cell contains the interrupt number for the interrupt type.
+
+ The 2nd cell is the priority of the interrupt.
+
+- reg : Specifies base physical address(s) and size of the NVIC registers.
+ This is at a fixed address (0xe000e100) and size (0xc00).
+
+- arm,num-irq-priority-bits: The number of priority bits implemented by the
+ given SoC
+
+Example:
+
+ intc: interrupt-controller@e000e100 {
+ compatible = "arm,v7m-nvic";
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xe000e100 0xc00>;
+ arm,num-irq-priority-bits = <4>;
+ };
diff --git a/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt
new file mode 100644
index 0000000..ea939f5
--- /dev/null
+++ b/Bindings/interrupt-controller/arm,versatile-fpga-irq.txt
@@ -0,0 +1,38 @@
+* ARM Versatile FPGA interrupt controller
+
+One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+such as the Integrator or Versatile family. The output of these different
+controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+instance can handle up to 32 interrupts.
+
+Required properties:
+- compatible: "arm,versatile-fpga-irq"
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts. Must be 1
+ as the FPGA IRQ controller has no configuration options for interrupt
+ sources. The cell is a u32 and defines the interrupt number.
+- reg: The register bank for the FPGA interrupt controller.
+- clear-mask: a u32 number representing the mask written to clear all IRQs
+ on the controller at boot for example.
+- valid-mask: a u32 number representing a bit mask determining which of
+ the interrupts are valid. Unconnected/unused lines are set to 0, and
+ the system till not make it possible for devices to request these
+ interrupts.
+
+The "oxsemi,ox810se-rps-irq" compatible is deprecated.
+
+Example:
+
+pic: pic@14000000 {
+ compatible = "arm,versatile-fpga-irq";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x14000000 0x100>;
+ clear-mask = <0xffffffff>;
+ valid-mask = <0x003fffff>;
+};
+
+Optional properties:
+- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
+ output is simply connected to the input of another IRQ controller,
+ then the parent IRQ shall be specified in this property.
diff --git a/Bindings/interrupt-controller/arm,vic.yaml b/Bindings/interrupt-controller/arm,vic.yaml
new file mode 100644
index 0000000..0075e72
--- /dev/null
+++ b/Bindings/interrupt-controller/arm,vic.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Vectored Interrupt Controller
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ One or more Vectored Interrupt Controllers (VIC's) can be connected in an
+ ARM system for interrupt routing. For multiple controllers they can either
+ be nested or have the outputs wire-OR'd together.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - arm,pl190-vic
+ - arm,pl192-vic
+ - arm,versatile-vic
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The number of cells to define the interrupts. It must be 1 as the
+ VIC has no configuration options for interrupt sources. The single
+ cell defines the interrupt number.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ valid-mask:
+ description:
+ A one cell big bit mask of valid interrupt sources. Each bit
+ represents single interrupt source, starting from source 0 at
+ LSb and ending at source 31 at MSb. A bit that is set means
+ that the source is wired and clear means otherwise. If unspecified,
+ defaults to all valid.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ valid-wakeup-mask:
+ description:
+ A one cell big bit mask of interrupt sources that can be configured
+ as wake up source for the system. Order of bits is the same as for
+ valid-mask property. A set bit means that this interrupt source
+ can be configured as a wake up source for the system. If unspecied,
+ defaults to all interrupt sources configurable as wake up sources.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ // PL192 VIC
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x60000 0x1000>;
+
+ valid-mask = <0xffffff7f>;
+ valid-wakeup-mask = <0x0000ff7f>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
new file mode 100644
index 0000000..033cc82
--- /dev/null
+++ b/Bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
@@ -0,0 +1,25 @@
+Device tree configuration for the I2C Interrupt Controller on the AST24XX and
+AST25XX SoCs.
+
+Required Properties:
+- #address-cells : should be 1
+- #size-cells : should be 1
+- #interrupt-cells : should be 1
+- compatible : should be "aspeed,ast2400-i2c-ic"
+ or "aspeed,ast2500-i2c-ic"
+- reg : address start and range of controller
+- interrupts : interrupt number
+- interrupt-controller : denotes that the controller receives and fires
+ new interrupts for child busses
+
+Example:
+
+i2c_ic: interrupt-controller@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+};
diff --git a/Bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 0000000..e3fea07
--- /dev/null
+++ b/Bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,23 @@
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed interrupt controller. The AST2400 and
+AST2500 SoC families include a legacy register layout before a re-designed
+layout, but the bindings do not prescribe the use of one or the other.
+
+Required properties:
+
+- compatible : "aspeed,ast2400-vic"
+ "aspeed,ast2500-vic"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+ vic: interrupt-controller@1e6c0080 {
+ compatible = "aspeed,ast2400-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1e6c0080 0x80>;
+ };
diff --git a/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt b/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
new file mode 100644
index 0000000..251ed44
--- /dev/null
+++ b/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
@@ -0,0 +1,23 @@
+Aspeed AST25XX and AST26XX SCU Interrupt Controller
+
+Required Properties:
+ - #interrupt-cells : must be 1
+ - compatible : must be "aspeed,ast2500-scu-ic",
+ "aspeed,ast2600-scu-ic0" or
+ "aspeed,ast2600-scu-ic1"
+ - interrupts : interrupt from the parent controller
+ - interrupt-controller : indicates that the controller receives and
+ fires new interrupts for child busses
+
+Example:
+
+ syscon@1e6e2000 {
+ ranges = <0 0x1e6e2000 0x1a8>;
+
+ scu_ic: interrupt-controller@18 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2500-scu-ic";
+ interrupts = <21>;
+ interrupt-controller;
+ };
+ };
diff --git a/Bindings/interrupt-controller/atmel,aic.txt b/Bindings/interrupt-controller/atmel,aic.txt
new file mode 100644
index 0000000..7079d44
--- /dev/null
+++ b/Bindings/interrupt-controller/atmel,aic.txt
@@ -0,0 +1,43 @@
+* Advanced Interrupt Controller (AIC)
+
+Required properties:
+- compatible: Should be:
+ - "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2",
+ "sama5d3" or "sama5d4"
+ - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
+ The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+ Default flag for internal sources should be set to 4 (active high).
+ The third cell is used to specify the irq priority from 0 (lowest) to 7
+ (highest).
+- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
+
+Examples:
+ /*
+ * AIC
+ */
+ aic: interrupt-controller@fffff000 {
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xfffff000 0x200>;
+ };
+
+ /*
+ * An interrupt generating device that is wired to an AIC.
+ */
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21 4 5>;
+ };
diff --git a/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
new file mode 100644
index 0000000..bdd1730
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -0,0 +1,131 @@
+BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
+
+The BCM2835 contains a custom top-level interrupt controller, which supports
+72 interrupt sources using a 2-level register scheme. The interrupt
+controller, or the HW block containing it, is referred to occasionally
+as "armctrl" in the SoC documentation, hence naming of this binding.
+
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+ "brcm,bcm2836-armctrl-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+
+ The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+ pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+ 1/2" register.
+
+ The 2nd cell contains the interrupt number within the bank. Valid values
+ are 0..7 for bank 0, and 0..31 for bank 1.
+
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupts : Specifies the interrupt on the parent for this interrupt
+ controller to handle.
+
+The interrupt sources are as follows:
+
+Bank 0:
+0: ARM_TIMER
+1: ARM_MAILBOX
+2: ARM_DOORBELL_0
+3: ARM_DOORBELL_1
+4: VPU0_HALTED
+5: VPU1_HALTED
+6: ILLEGAL_TYPE0
+7: ILLEGAL_TYPE1
+
+Bank 1:
+0: TIMER0
+1: TIMER1
+2: TIMER2
+3: TIMER3
+4: CODEC0
+5: CODEC1
+6: CODEC2
+7: VC_JPEG
+8: ISP
+9: VC_USB
+10: VC_3D
+11: TRANSPOSER
+12: MULTICORESYNC0
+13: MULTICORESYNC1
+14: MULTICORESYNC2
+15: MULTICORESYNC3
+16: DMA0
+17: DMA1
+18: VC_DMA2
+19: VC_DMA3
+20: DMA4
+21: DMA5
+22: DMA6
+23: DMA7
+24: DMA8
+25: DMA9
+26: DMA10
+27: DMA11-14 - shared interrupt for DMA 11 to 14
+28: DMAALL - triggers on all dma interrupts (including channel 15)
+29: AUX
+30: ARM
+31: VPUDMA
+
+Bank 2:
+0: HOSTPORT
+1: VIDEOSCALER
+2: CCP2TX
+3: SDC
+4: DSI0
+5: AVE
+6: CAM0
+7: CAM1
+8: HDMI0
+9: HDMI1
+10: PIXELVALVE1
+11: I2CSPISLV
+12: DSI1
+13: PWA0
+14: PWA1
+15: CPR
+16: SMI
+17: GPIO0
+18: GPIO1
+19: GPIO2
+20: GPIO3
+21: VC_I2C
+22: VC_SPI
+23: VC_I2SPCM
+24: VC_SDIO
+25: VC_UART
+26: SLIMBUS
+27: VEC
+28: CPG
+29: RNG
+30: VC_ARASANSDIO
+31: AVSPMON
+
+Example:
+
+/* BCM2835, first level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2835-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
diff --git a/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
new file mode 100644
index 0000000..8ced169
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs. One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2836-l1-intc"
+- reg: Specifies base physical address and size of the
+ registers
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&local_intc>;
+};
diff --git a/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
new file mode 100644
index 0000000..2bc19b1
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -0,0 +1,55 @@
+Broadcom BCM6345-style Level 1 interrupt controller
+
+This block is a first level interrupt controller that is typically connected
+directly to one of the HW INT lines on each CPU.
+
+Key elements of the hardware design include:
+
+- 32, 64 or 128 incoming level IRQ lines
+
+- Most onchip peripherals are wired directly to an L1 input
+
+- A separate instance of the register set for each CPU, allowing individual
+ peripheral IRQs to be routed to any CPU
+
+- Contains one or more enable/status word pairs per CPU
+
+- No atomic set/clear operations
+
+- No polarity/level/edge settings
+
+- No FIFO or priority encoder logic; software is expected to read all
+ 2-4 status words to determine which IRQs are pending
+
+Required properties:
+
+- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
+- reg: specifies the base physical address and size of the registers;
+ the number of supported IRQs is inferred from the size argument
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+ node; valid values depend on the type of parent interrupt controller
+
+If multiple reg ranges and interrupt-parent entries are present on an SMP
+system, the driver will allow IRQ SMP affinity to be set up through the
+/proc/irq/ interface. In the simplest possible configuration, only one
+reg range and one interrupt-parent is needed.
+
+The driver operates in native CPU endian by default, there is no support for
+specifying an alternative endianness.
+
+Example:
+
+periph_intc: interrupt-controller@10000000 {
+ compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x20>,
+ <0x10000040 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+};
diff --git a/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 0000000..5ecb6fa
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+ This block is a first level interrupt controller that is typically connected
+ directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip
+ since BCM7038 has contained this hardware.
+
+ Key elements of the hardware design include:
+
+ - 64, 96, 128, or 160 incoming level IRQ lines
+
+ - Most onchip peripherals are wired directly to an L1 input
+
+ - A separate instance of the register set for each CPU, allowing individual
+ peripheral IRQs to be routed to any CPU
+
+ - Atomic mask/unmask operations
+
+ - No polarity/level/edge settings
+
+ - No FIFO or priority encoder logic; software is expected to read all
+ 2-5 status words to determine which IRQs are pending
+
+ If multiple reg ranges and interrupt-parent entries are present on an SMP
+ system, the driver will allow IRQ SMP affinity to be set up through the
+ /proc/irq/ interface. In the simplest possible configuration, only one
+ reg range and one interrupt-parent is needed.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm7038-l1-intc
+
+ reg:
+ description: >
+ Specifies the base physical address and size of the registers
+ the number of supported IRQs is inferred from the size argument
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ description: >
+ Specifies the interrupt line(s) in the interrupt-parent controller node;
+ valid values depend on the type of parent interrupt controller
+
+ brcm,irq-can-wake:
+ type: boolean
+ description: >
+ If present, this means the L1 controller can be used as a
+ wakeup source for system suspend/resume.
+
+ brcm,int-fwd-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ If present, a bit mask to indicate which interrupts have already been
+ configured by the firmware and should be left unmanaged. This should
+ have one 32-bit word per status/set/clear/mask group.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ periph_intc: interrupt-controller@1041a400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
diff --git a/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 0000000..786f242
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+ This interrupt controller hardware is a second level interrupt controller that
+ is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+ platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+ Such an interrupt controller has the following hardware design:
+
+ - outputs multiple interrupts signals towards its interrupt controller parent
+
+ - controls how some of the interrupts will be flowing, whether they will
+ directly output an interrupt signal towards the interrupt controller parent,
+ or if they will output an interrupt signal at this 2nd level interrupt
+ controller, in particular for UARTs
+
+ - has one 32-bit enable word and one 32-bit status word
+
+ - no atomic set/clear operations
+
+ - not all bits within the interrupt controller actually map to an interrupt
+
+ The typical hardware layout for this controller is represented below:
+
+ 2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC)
+
+ 0 -----[ MUX ] ------------|==========> GIC interrupt 75
+ \-----------\
+ |
+ 1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+ \------------|
+ |
+ 2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+ \------------|
+ |
+ 3 ---------------------|
+ 4 ---------------------|
+ 5 ---------------------|
+ 7 ---------------------|---|===========> GIC interrupt 66
+ 9 ---------------------|
+ 10 --------------------|
+ 11 --------------------/
+
+ 6 ------------------------\
+ |===========> GIC interrupt 64
+ 8 ------------------------/
+
+ 12 ........................ X
+ 13 ........................ X (not connected)
+ ..
+ 31 ........................ X
+
+ The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms
+ on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+ - outputs a single interrupt signal to its interrupt controller parent
+
+ - contains one or more enable/status word pairs, which often appear at
+ different offsets in different blocks
+
+ - no atomic set/clear operations
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm7120-l2-intc
+ - brcm,bcm3380-l2-intc
+
+ reg:
+ minItems: 1
+ maxItems: 4
+ description: >
+ Specifies the base physical address and size of the registers
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 32
+
+ brcm,int-map-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: >
+ 32-bits bit mask describing how many and which interrupts are wired to
+ this 2nd level interrupt controller, and how they match their respective
+ interrupt parents. Should match exactly the number of interrupts
+ specified in the 'interrupts' property.
+
+ brcm,irq-can-wake:
+ type: boolean
+ description: >
+ If present, this means the L2 controller can be used as a wakeup source
+ for system suspend/resume.
+
+ brcm,int-fwd-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+ description: >
+ if present, a bit mask to configure the interrupts which have a mux gate,
+ typically UARTs. Setting these bits will make their respective interrupt
+ outputs bypass this 2nd level interrupt controller completely; it is
+ completely transparent for the interrupt controller parent. This should
+ have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+examples:
+ - |
+ irq0_intc: interrupt-controller@f0406800 {
+ compatible = "brcm,bcm7120-l2-intc";
+ interrupt-parent = <&intc>;
+ #interrupt-cells = <1>;
+ reg = <0xf0406800 0x8>;
+ interrupt-controller;
+ interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+ brcm,int-map-mask = <0xeb8>, <0x140>;
+ brcm,int-fwd-mask = <0x7>;
+ };
+
+ - |
+ irq1_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+ <0x10000020 0x4>, <0x10000028 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
diff --git a/Bindings/interrupt-controller/brcm,l2-intc.yaml b/Bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 0000000..8961afc
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - brcm,hif-spi-l2-intc
+ - brcm,upg-aux-aon-l2-intc
+ - const: brcm,l2-intc
+ - items:
+ - enum:
+ - brcm,bcm2711-l2-intc
+ - const: brcm,l2-intc
+ - items:
+ - const: brcm,bcm7271-l2-intc
+ - items:
+ - const: brcm,l2-intc
+
+ reg:
+ maxItems: 1
+ description: >
+ Specifies the base physical address and size of the registers
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
+ brcm,irq-can-wake:
+ type: boolean
+ description: >
+ If present, this means the L2 controller can be used as a wakeup source
+ for system suspend/resume.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+examples:
+ - |
+ hif_intr2_intc: interrupt-controller@f0441000 {
+ compatible = "brcm,l2-intc";
+ reg = <0xf0441000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <0x0 0x20 0x0>;
+ };
diff --git a/Bindings/interrupt-controller/cdns,xtensa-mx.txt b/Bindings/interrupt-controller/cdns,xtensa-mx.txt
new file mode 100644
index 0000000..d4de980
--- /dev/null
+++ b/Bindings/interrupt-controller/cdns,xtensa-mx.txt
@@ -0,0 +1,18 @@
+* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX)
+
+Required properties:
+- compatible: Should be "cdns,xtensa-mx".
+
+Remaining properties have exact same meaning as in Xtensa PIC
+(see cdns,xtensa-pic.txt).
+
+Examples:
+ pic: pic {
+ compatible = "cdns,xtensa-mx";
+ /* one cell: internal irq number,
+ * two cells: second cell == 0: internal irq number
+ * second cell == 1: external irq number
+ */
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
diff --git a/Bindings/interrupt-controller/cdns,xtensa-pic.txt b/Bindings/interrupt-controller/cdns,xtensa-pic.txt
new file mode 100644
index 0000000..026ef4c
--- /dev/null
+++ b/Bindings/interrupt-controller/cdns,xtensa-pic.txt
@@ -0,0 +1,25 @@
+* Xtensa built-in Programmable Interrupt Controller (PIC)
+
+Required properties:
+- compatible: Should be "cdns,xtensa-pic".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts.
+ It may be either 1 or 2.
+ When it's 1, the first cell is the internal IRQ number.
+ When it's 2, the first cell is the IRQ number, and the second cell
+ specifies whether it's internal (0) or external (1).
+ Periferals are usually connected to a fixed external IRQ, but for different
+ core variants it may be mapped to different internal IRQ.
+ IRQ sensitivity and priority are fixed for each core variant and may not be
+ changed at runtime.
+
+Examples:
+ pic: pic {
+ compatible = "cdns,xtensa-pic";
+ /* one cell: internal irq number,
+ * two cells: second cell == 0: internal irq number
+ * second cell == 1: external irq number
+ */
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
diff --git a/Bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 0000000..969b4582
--- /dev/null
+++ b/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,ep7209-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID Name Description
+---------------------------
+1: BLINT Battery low (FIQ)
+3: MCINT Media changed (FIQ)
+4: CSINT CODEC sound
+5: EINT1 External 1
+6: EINT2 External 2
+7: EINT3 External 3
+8: TC1OI TC1 under flow
+9: TC2OI TC2 under flow
+10: RTCMI RTC compare match
+11: TINT 64Hz tick
+12: UTXINT1 UART1 transmit FIFO half empty
+13: URXINT1 UART1 receive FIFO half full
+14: UMSINT UART1 modem status changed
+15: SSEOTI SSI1 end of transfer
+16: KBDINT Keyboard
+17: SS2RX SSI2 receive FIFO half or greater full
+18: SS2TX SSI2 transmit FIFO less than half empty
+28: UTXINT2 UART2 transmit FIFO half empty
+29: URXINT2 UART2 receive FIFO half full
+32: DAIINT DAI interface (FIQ)
+
+Example:
+ intc: interrupt-controller {
+ compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
+ reg = <0x80000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/csky,apb-intc.txt b/Bindings/interrupt-controller/csky,apb-intc.txt
new file mode 100644
index 0000000..44286dc
--- /dev/null
+++ b/Bindings/interrupt-controller/csky,apb-intc.txt
@@ -0,0 +1,62 @@
+==============================
+C-SKY APB Interrupt Controller
+==============================
+
+C-SKY APB Interrupt Controller is a simple soc interrupt controller
+on the apb bus and we only use it as root irq controller.
+
+ - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
+ - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
+ - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
+
+=============================
+intc node bindings definition
+=============================
+
+ Description: Describes APB interrupt controller
+
+ PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "csky,apb-intc"
+ "csky,dual-apb-intc"
+ "csky,gx6605s-intc"
+ - #interrupt-cells
+ Usage: required
+ Value type: <u32>
+ Definition: must be <1>
+ - reg
+ Usage: required
+ Value type: <u32 u32>
+ Definition: <phyaddr size> in soc from cpu view
+ - interrupt-controller:
+ Usage: required
+ - csky,support-pulse-signal:
+ Usage: select
+ Description: to support pulse signal flag
+
+Examples:
+---------
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,apb-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,dual-apb-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@500000 {
+ compatible = "csky,gx6605s-intc";
+ #interrupt-cells = <1>;
+ reg = <0x00500000 0x400>;
+ interrupt-controller;
+ };
diff --git a/Bindings/interrupt-controller/csky,mpintc.txt b/Bindings/interrupt-controller/csky,mpintc.txt
new file mode 100644
index 0000000..e6bbcae
--- /dev/null
+++ b/Bindings/interrupt-controller/csky,mpintc.txt
@@ -0,0 +1,52 @@
+===========================================
+C-SKY Multi-processors Interrupt Controller
+===========================================
+
+C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
+SMP soc, and it also could be used in non-SMP system.
+
+Interrupt number definition:
+ 0-15 : software irq, and we use 15 as our IPI_IRQ.
+ 16-31 : private irq, and we use 16 as the co-processor timer.
+ 31-1024: common irq for soc ip.
+
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
+=============================
+intc node bindings definition
+=============================
+
+ Description: Describes SMP interrupt controller
+
+ PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "csky,mpintc"
+ - #interrupt-cells
+ Usage: required
+ Value type: <u32>
+ Definition: <2>
+ - interrupt-controller:
+ Usage: required
+
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
+---------
+#include <dt-bindings/interrupt-controller/irq.h>
+
+ intc: interrupt-controller {
+ compatible = "csky,mpintc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ device: device-example {
+ ...
+ interrupts = <34 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&intc>;
+ };
diff --git a/Bindings/interrupt-controller/digicolor-ic.txt b/Bindings/interrupt-controller/digicolor-ic.txt
new file mode 100644
index 0000000..42d41ec
--- /dev/null
+++ b/Bindings/interrupt-controller/digicolor-ic.txt
@@ -0,0 +1,21 @@
+Conexant Digicolor Interrupt Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-ic"
+- reg : Specifies base physical address and size of the interrupt controller
+ registers (IC) area
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- syscon: A phandle to the syscon node describing UC registers
+
+Example:
+
+ intc: interrupt-controller@f0000040 {
+ compatible = "cnxt,cx92755-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xf0000040 0x40>;
+ syscon = <&uc_regs>;
+ };
diff --git a/Bindings/interrupt-controller/ezchip,nps400-ic.txt b/Bindings/interrupt-controller/ezchip,nps400-ic.txt
new file mode 100644
index 0000000..888b2b9
--- /dev/null
+++ b/Bindings/interrupt-controller/ezchip,nps400-ic.txt
@@ -0,0 +1,17 @@
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/Bindings/interrupt-controller/faraday,ftintc010.txt b/Bindings/interrupt-controller/faraday,ftintc010.txt
new file mode 100644
index 0000000..24428d4
--- /dev/null
+++ b/Bindings/interrupt-controller/faraday,ftintc010.txt
@@ -0,0 +1,25 @@
+* Faraday Technologt FTINTC010 interrupt controller
+
+This interrupt controller is a stock IP block from Faraday Technology found
+in the Gemini SoCs and other designs.
+
+Required properties:
+- compatible: must be one of
+ "faraday,ftintc010"
+ "cortina,gemini-interrupt-controller" (deprecated)
+- reg: The register bank for the interrupt controller.
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts.
+ Must be 2 as the controller can specify level or rising edge
+ IRQs. The bindings follows the standard binding for controllers
+ with two cells specified in
+ interrupt-controller/interrupts.txt
+
+Example:
+
+interrupt-controller@48000000 {
+ compatible = "faraday,ftintc010"
+ reg = <0x48000000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
diff --git a/Bindings/interrupt-controller/fsl,intmux.yaml b/Bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 0000000..985bfa4
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - NXP Linux Team <linux-imx@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx-intmux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Should contain the parent interrupt lines (up to 8) used to multiplex
+ the input interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupts = <0 16 4>,
+ <0 17 4>,
+ <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>,
+ <0 23 4>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ clocks = <&clk>;
+ clock-names = "ipg";
+ };
diff --git a/Bindings/interrupt-controller/fsl,irqsteer.yaml b/Bindings/interrupt-controller/fsl,irqsteer.yaml
new file mode 100644
index 0000000..20ad4ad
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IRQSTEER Interrupt Multiplexer
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx-irqsteer
+ - items:
+ - const: fsl,imx8m-irqsteer
+ - const: fsl,imx-irqsteer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ should contain the up to 8 parent interrupt lines used to multiplex
+ the input interrupts. They should be specified sequentially from
+ output 0 to 7.
+ items:
+ - description: output interrupt 0
+ - description: output interrupt 1
+ - description: output interrupt 2
+ - description: output interrupt 3
+ - description: output interrupt 4
+ - description: output interrupt 5
+ - description: output interrupt 6
+ - description: output interrupt 7
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ fsl,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ u32 value representing the output channel that all input IRQs should be
+ steered into.
+
+ fsl,num-irqs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ u32 value representing the number of input interrupts of this channel,
+ should be multiple of 32 input interrupts and up to 512 interrupts.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - interrupt-controller
+ - "#interrupt-cells"
+ - fsl,channel
+ - fsl,num-irqs
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@32e2d000 {
+ compatible = "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <64>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/fsl,ls-extirq.yaml b/Bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 0000000..887e565
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+ - Li Yang <leoyang.li@nxp.com>
+
+description: |
+ Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+ LX216xA) support inverting the polarity of certain external interrupt
+ lines.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,ls1021a-extirq
+ - fsl,ls1043a-extirq
+ - fsl,ls1088a-extirq
+ - items:
+ - enum:
+ - fsl,ls1046a-extirq
+ - const: fsl,ls1043a-extirq
+ - items:
+ - enum:
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+ - const: fsl,ls1088a-extirq
+
+ '#interrupt-cells':
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the Interrupt Polarity Control Register (INTPCR) in the
+ SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+ interrupt-map:
+ description: Specifies the mapping from external interrupts to GIC interrupts.
+
+ interrupt-map-mask: true
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupt-map
+ - interrupt-map-mask
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1021a-extirq
+ then:
+ properties:
+ interrupt-map:
+ minItems: 6
+ maxItems: 6
+ interrupt-map-mask:
+ items:
+ - const: 0x7
+ - const: 0
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1043a-extirq
+ - fsl,ls1046a-extirq
+ - fsl,ls1088a-extirq
+ - fsl,ls2080a-extirq
+ - fsl,lx2160a-extirq
+ then:
+ properties:
+ interrupt-map:
+ minItems: 12
+ maxItems: 12
+ interrupt-map-mask:
+ items:
+ - const: 0xf
+ - const: 0
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x7 0x0>;
+ };
diff --git a/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
new file mode 100644
index 0000000..454ce04
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -0,0 +1,30 @@
+* Freescale Layerscape SCFG PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "fsl,<soc-name>-msi" to identify
+ Layerscape PCIe MSI controller block such as:
+ "fsl,ls1021a-msi"
+ "fsl,ls1043a-msi"
+ "fsl,ls1046a-msi"
+ "fsl,ls1043a-v1.1-msi"
+ "fsl,ls1012a-msi"
+- msi-controller: indicates that this is a PCIe MSI controller node
+- reg: physical base address of the controller and length of memory mapped.
+- interrupts: an interrupt to the parent interrupt controller.
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. If interrupt-parent is not provided, the default parent interrupt
+controller will be used.
+Each PCIe node needs to have property msi-parent that points to
+MSI controller node
+
+Examples:
+
+ msi1: msi-controller@1571000 {
+ compatible = "fsl,ls1043a-msi";
+ reg = <0x0 0x1571000 0x0 0x8>,
+ msi-controller;
+ interrupts = <0 116 0x4>;
+ };
diff --git a/Bindings/interrupt-controller/fsl,mu-msi.yaml b/Bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 0000000..799ae5c
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The Messaging Unit module enables two processors within the SoC to
+ communicate and coordinate by passing messages (e.g. data, status
+ and control) through the MU interface. The MU also provides the ability
+ for one processor (A side) to signal the other processor (B side) using
+ interrupts.
+
+ Because the MU manages the messaging between processors, the MU uses
+ different clocks (from each side of the different peripheral buses).
+ Therefore, the MU must synchronize the accesses from one side to the
+ other. The MU accomplishes synchronization using two sets of matching
+ registers (Processor A-side, Processor B-side).
+
+ MU can work as msi interrupt controller to do doorbell
+
+allOf:
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-mu-msi
+ - fsl,imx7ulp-mu-msi
+ - fsl,imx8ulp-mu-msi
+ - fsl,imx8ulp-mu-msi-s4
+
+ reg:
+ items:
+ - description: a side register base address
+ - description: b side register base address
+
+ reg-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupts:
+ description: a side interrupt number.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: a side power domain
+ - description: b side power domain
+
+ power-domain-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupt-controller: true
+
+ msi-controller: true
+
+ "#msi-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - msi-controller
+ - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ msi-controller@5d270000 {
+ compatible = "fsl,imx6sx-mu-msi";
+ msi-controller;
+ #msi-cells = <0>;
+ interrupt-controller;
+ reg = <0x5d270000 0x10000>, /* A side */
+ <0x5d300000 0x10000>; /* B side */
+ reg-names = "processor-a-side", "processor-b-side";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MU_12A>,
+ <&pd IMX_SC_R_MU_12B>;
+ power-domain-names = "processor-a-side", "processor-b-side";
+ };
diff --git a/Bindings/interrupt-controller/google,goldfish-pic.txt b/Bindings/interrupt-controller/google,goldfish-pic.txt
new file mode 100644
index 0000000..35f7527
--- /dev/null
+++ b/Bindings/interrupt-controller/google,goldfish-pic.txt
@@ -0,0 +1,30 @@
+Android Goldfish PIC
+
+Android Goldfish programmable interrupt device used by Android
+emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-pic"
+- reg : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example for mips when used in cascade mode:
+
+ cpuintc {
+ #interrupt-cells = <0x1>;
+ #address-cells = <0>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ interrupt-controller@1f000000 {
+ compatible = "google,goldfish-pic";
+ reg = <0x1f000000 0x1000>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <0x2>;
+ };
diff --git a/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt
new file mode 100644
index 0000000..a6813a0
--- /dev/null
+++ b/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -0,0 +1,84 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2"
+
+- reg: Specifies the base physical address and size of the Mbigen
+ registers.
+
+Mbigen sub node required properties:
+------------------------------------------
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+ For more detail information,please refer to the generic msi-parent binding in
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+ instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+
+ The 1st cell is hardware pin number of the interrupt.This number is local to
+ each mbigen chip and in the range from 0 to the maximum interrupts number
+ of the mbigen.
+
+ The 2nd cell is the interrupt trigger type.
+ The value of this cell should be:
+ 1: rising edge triggered
+ or
+ 4: high level triggered
+
+Examples:
+
+ mbigen_chip_dsa {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0xc0080000 0x0 0x10000>;
+
+ mbigen_gmac:intc_gmac {
+ interrupt-controller;
+ msi-parent = <&its_dsa 0x40b1c>;
+ num-pins = <9>;
+ #interrupt-cells = <2>;
+ };
+
+ mbigen_i2c:intc_i2c {
+ interrupt-controller;
+ msi-parent = <&its_dsa 0x40b0e>;
+ num-pins = <2>;
+ #interrupt-cells = <2>;
+ };
+ };
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+ gmac0: ethernet@c2080000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0xc2080000 0 0x20000>,
+ <0 0xc0000000 0 0x1000>;
+ interrupt-parent = <&mbigen_device_gmac>;
+ interrupts = <656 1>,
+ <657 1>;
+ };
diff --git a/Bindings/interrupt-controller/idt,32434-pic.yaml b/Bindings/interrupt-controller/idt,32434-pic.yaml
new file mode 100644
index 0000000..afb3dd8
--- /dev/null
+++ b/Bindings/interrupt-controller/idt,32434-pic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 Interrupt Controller
+
+maintainers:
+ - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ "#interrupt-cells":
+ const: 1
+
+ compatible:
+ const: idt,32434-pic
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupt-controller
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ idtpic3: interrupt-controller@3800c {
+ compatible = "idt,32434-pic";
+ reg = <0x3800c 0x0c>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/img,pdc-intc.txt b/Bindings/interrupt-controller/img,pdc-intc.txt
new file mode 100644
index 0000000..5dc2a55
--- /dev/null
+++ b/Bindings/interrupt-controller/img,pdc-intc.txt
@@ -0,0 +1,105 @@
+* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding
+
+This binding specifies what properties must be available in the device tree
+representation of a PDC IRQ controller. This has a number of input interrupt
+lines which can wake the system, and are passed on through output interrupt
+lines.
+
+Required properties:
+
+ - compatible: Specifies the compatibility list for the interrupt controller.
+ The type shall be <string> and the value shall include "img,pdc-intc".
+
+ - reg: Specifies the base PDC physical address(s) and size(s) of the
+ addressable register space. The type shall be <prop-encoded-array>.
+
+ - interrupt-controller: The presence of this property identifies the node
+ as an interrupt controller. No property value shall be defined.
+
+ - #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 2.
+
+ - num-perips: Number of waking peripherals.
+
+ - num-syswakes: Number of SysWake inputs.
+
+ - interrupts: List of interrupt specifiers. The first specifier shall be the
+ shared SysWake interrupt, and remaining specifies shall be PDC peripheral
+ interrupts in order.
+
+* Interrupt Specifier Definition
+
+ Interrupt specifiers consists of 2 cells encoded as follows:
+
+ - <1st-cell>: The interrupt-number that identifies the interrupt source.
+ 0-7: Peripheral interrupts
+ 8-15: SysWake interrupts
+
+ - <2nd-cell>: The level-sense information, encoded using the Linux interrupt
+ flags as follows (only 4 valid for peripheral interrupts):
+ 0 = none (decided by software)
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 3 = both edge triggered
+ 4 = active-high level-sensitive (required for perip irqs)
+ 8 = active-low level-sensitive
+
+* Examples
+
+Example 1:
+
+ /*
+ * TZ1090 PDC block
+ */
+ pdc: pdc@02006000 {
+ // This is an interrupt controller node.
+ interrupt-controller;
+
+ // Three cells to encode interrupt sources.
+ #interrupt-cells = <2>;
+
+ // Offset address of 0x02006000 and size of 0x1000.
+ reg = <0x02006000 0x1000>;
+
+ // Compatible with Meta hardware trigger block.
+ compatible = "img,pdc-intc";
+
+ // Three peripherals are connected.
+ num-perips = <3>;
+
+ // Four SysWakes are connected.
+ num-syswakes = <4>;
+
+ interrupts = <18 4 /* level */>, /* Syswakes */
+ <30 4 /* level */>, /* Peripheral 0 (RTC) */
+ <29 4 /* level */>, /* Peripheral 1 (IR) */
+ <31 4 /* level */>; /* Peripheral 2 (WDT) */
+ };
+
+Example 2:
+
+ /*
+ * An SoC peripheral that is wired through the PDC.
+ */
+ rtc0 {
+ // The interrupt controller that this device is wired to.
+ interrupt-parent = <&pdc>;
+
+ // Interrupt source Peripheral 0
+ interrupts = <0 /* Peripheral 0 (RTC) */
+ 4> /* IRQ_TYPE_LEVEL_HIGH */
+ };
+
+Example 3:
+
+ /*
+ * An interrupt generating device that is wired to a SysWake pin.
+ */
+ touchscreen0 {
+ // The interrupt controller that this device is wired to.
+ interrupt-parent = <&pdc>;
+
+ // Interrupt source SysWake 0 that is active-low level-sensitive
+ interrupts = <8 /* SysWake0 */
+ 8 /* IRQ_TYPE_LEVEL_LOW */>;
+ };
diff --git a/Bindings/interrupt-controller/ingenic,intc.yaml b/Bindings/interrupt-controller/ingenic,intc.yaml
new file mode 100644
index 0000000..609308a
--- /dev/null
+++ b/Bindings/interrupt-controller/ingenic,intc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs interrupt controller
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: "^interrupt-controller@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-intc
+ - ingenic,jz4760-intc
+ - ingenic,jz4780-intc
+ - items:
+ - enum:
+ - ingenic,jz4775-intc
+ - ingenic,jz4770-intc
+ - ingenic,jz4760b-intc
+ - const: ingenic,jz4760-intc
+ - items:
+ - const: ingenic,x1000-intc
+ - const: ingenic,jz4780-intc
+ - items:
+ - const: ingenic,jz4725b-intc
+ - const: ingenic,jz4740-intc
+
+ "#interrupt-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc";
+ reg = <0x10001000 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
diff --git a/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml
new file mode 100644
index 0000000..a3ac818
--- /dev/null
+++ b/Bindings/interrupt-controller/intel,ce4100-ioapic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+maintainers:
+ - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+ Intel's Advanced Programmable Interrupt Controller (APIC) is a
+ family of interrupt controllers. The APIC is a split
+ architecture design, with a local component (LAPIC) integrated
+ into the processor itself and an external I/O APIC. Local APIC
+ (lapic) receives interrupts from the processor's interrupt pins,
+ from internal sources and from an external I/O APIC (ioapic).
+ And it sends these to the processor core for handling.
+ See [1] Chapter 8 for more details.
+
+ Many of the Intel's generic devices like hpet, ioapic, lapic have
+ the ce4100 name in their compatible property names because they
+ first appeared in CE4100 SoC.
+
+ This schema defines bindings for I/O APIC interrupt controller.
+
+ [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+ compatible:
+ const: intel,ce4100-ioapic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ ioapic1: interrupt-controller@fec00000 {
+ compatible = "intel,ce4100-ioapic";
+ reg = <0xfec00000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Bindings/interrupt-controller/intel,ce4100-lapic.yaml b/Bindings/interrupt-controller/intel,ce4100-lapic.yaml
new file mode 100644
index 0000000..6b20a5f
--- /dev/null
+++ b/Bindings/interrupt-controller/intel,ce4100-lapic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Local Advanced Programmable Interrupt Controller (LAPIC)
+
+maintainers:
+ - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+ Intel's Advanced Programmable Interrupt Controller (APIC) is a
+ family of interrupt controllers. The APIC is a split
+ architecture design, with a local component (LAPIC) integrated
+ into the processor itself and an external I/O APIC. Local APIC
+ (lapic) receives interrupts from the processor's interrupt pins,
+ from internal sources and from an external I/O APIC (ioapic).
+ And it sends these to the processor core for handling.
+ See [1] Chapter 8 for more details.
+
+ Many of the Intel's generic devices like hpet, ioapic, lapic have
+ the ce4100 name in their compatible property names because they
+ first appeared in CE4100 SoC.
+
+ This schema defines bindings for local APIC interrupt controller.
+
+ [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+ compatible:
+ const: intel,ce4100-lapic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ intel,virtual-wire-mode:
+ description: Intel defines a few possible interrupt delivery
+ modes. With respect to boot/init time, mainly two interrupt
+ delivery modes are possible.
+ PIC Mode - Legacy external 8259 compliant PIC interrupt controller.
+ Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
+ For ACPI or MPS spec compliant systems, it is figured out by some read
+ only bit field/s available in their respective defined data structures.
+ For OF based systems, it is by default set to PIC mode.
+ But if this optional boolean property is set, then the interrupt delivery
+ mode is configured to virtual wire compatibility mode.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ lapic0: interrupt-controller@fee00000 {
+ compatible = "intel,ce4100-lapic";
+ reg = <0xfee00000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ intel,virtual-wire-mode;
+ };
diff --git a/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
new file mode 100644
index 0000000..a02a6b5
--- /dev/null
+++ b/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors Interrupt Controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This interrupt controller is found in the Intel IXP4xx processors.
+ Some processors have 32 interrupts, some have up to 64 interrupts.
+ The exact number of interrupts is determined from the compatible
+ string.
+
+ The distinct IXP4xx families with different interrupt controller
+ variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four
+ families were the only ones to reach the developer and consumer
+ market.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-interrupt
+ - intel,ixp43x-interrupt
+ - intel,ixp45x-interrupt
+ - intel,ixp46x-interrupt
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ intcon: interrupt-controller@c8003000 {
+ compatible = "intel,ixp43x-interrupt";
+ reg = <0xc8003000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Bindings/interrupt-controller/interrupts.txt b/Bindings/interrupt-controller/interrupts.txt
new file mode 100644
index 0000000..4ebfa00
--- /dev/null
+++ b/Bindings/interrupt-controller/interrupts.txt
@@ -0,0 +1,122 @@
+Specifying interrupt information for devices
+============================================
+
+1) Interrupt client nodes
+-------------------------
+
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
+
+ Example:
+ interrupt-parent = <&intc1>;
+ interrupts = <5 0>, <6 0>;
+
+The "interrupt-parent" property is used to specify the controller to which
+interrupts are routed and contains a single phandle referring to the interrupt
+controller node. This property is inherited, so it may be specified in an
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form; useful when a node needs
+to reference multiple interrupt parents or a different interrupt parent than
+the inherited one. Each entry in this property contains both the parent phandle
+and the interrupt specifier.
+
+ Example:
+ interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+2) Interrupt controller nodes
+-----------------------------
+
+A device is marked as an interrupt controller with the "interrupt-controller"
+property. This is a empty, boolean property. An additional "#interrupt-cells"
+property defines the number of cells needed to specify a single interrupt.
+
+It is the responsibility of the interrupt controller's binding to define the
+length and format of the interrupt specifier. The following two variants are
+commonly used:
+
+ a) one cell
+ -----------
+ The #interrupt-cells property is set to 1 and the single cell defines the
+ index of the interrupt within the controller.
+
+ Example:
+
+ vic: intc@10140000 {
+ compatible = "arm,versatile-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10140000 0x1000>;
+ };
+
+ sic: intc@10003000 {
+ compatible = "arm,versatile-sic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10003000 0x1000>;
+ interrupt-parent = <&vic>;
+ interrupts = <31>; /* Cascaded to vic */
+ };
+
+ b) two cells
+ ------------
+ The #interrupt-cells property is set to 2 and the first cell defines the
+ index of the interrupt within the controller, while the second cell is used
+ to specify any of the following flags:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+ Example:
+
+ i2c@7000c000 {
+ gpioext: gpio-adnp@41 {
+ compatible = "ad,gpio-adnp";
+ reg = <0x41>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <160 1>;
+
+ gpio-controller;
+ #gpio-cells = <1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ nr-gpios = <64>;
+ };
+
+ sx8634@2b {
+ compatible = "smtc,sx8634";
+ reg = <0x2b>;
+
+ interrupt-parent = <&gpioext>;
+ interrupts = <3 0x8>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ threshold = <0x40>;
+ sensitivity = <7>;
+ };
+ };
+
+3) Interrupt wakeup parent
+--------------------------
+
+Some interrupt controllers in a SoC, are always powered on and have a select
+interrupts routed to them, so that they can wakeup the SoC from suspend. These
+interrupt controllers do not fall into the category of a parent interrupt
+controller and can be specified by the "wakeup-parent" property and contain a
+single phandle referring to the wakeup capable interrupt controller.
+
+ Example:
+ wakeup-parent = <&pdc_intc>;
diff --git a/Bindings/interrupt-controller/jcore,aic.txt b/Bindings/interrupt-controller/jcore,aic.txt
new file mode 100644
index 0000000..ee2ad36
--- /dev/null
+++ b/Bindings/interrupt-controller/jcore,aic.txt
@@ -0,0 +1,26 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
+ with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+ the "aic2" core with 64 interrupts.
+
+- reg: Memory region(s) for configuration. For SMP, there should be one
+ region per cpu, indexed by the sequential, zero-based hardware cpu
+ number.
+
+- interrupt-controller: Identifies the node as an interrupt controller
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+ compatible = "jcore,aic2";
+ reg = < 0x200 0x30 0x500 0x30 >;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/Bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 0000000..e8dfa65
--- /dev/null
+++ b/Bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ This module is part of the sl28cpld multi-function device. For more
+ details see ../mfd/kontron,sl28cpld.yaml.
+
+ The following interrupts are available. All types and levels are fixed
+ and handled by the board management controller.
+
+ ==== ============= ==================================
+ IRQ line/device description
+ ==== ============= ==================================
+ 0 RTC_INT# Interrupt line from on-board RTC
+ 1 SMB_ALERT# Event on SMB_ALERT# line (P1)
+ 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43)
+ 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44)
+ 4 PWR_BTN# Event on PWR_BTN# line (P128)
+ 5 SLEEP# Event on SLEEP# line (S149)
+ 6 watchdog Interrupt of the internal watchdog
+ 7 n/a not used
+ ==== ============= ==================================
+
+properties:
+ compatible:
+ enum:
+ - kontron,sl28cpld-intc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupt-controller: true
+
+required:
+ - compatible
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+
+additionalProperties: false
diff --git a/Bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml b/Bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
new file mode 100644
index 0000000..adf9899
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPU Interrupt Controller
+
+maintainers:
+ - Liu Peibao <liupeibao@loongson.cn>
+
+properties:
+ compatible:
+ const: loongson,cpu-interrupt-controller
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+
+examples:
+ - |
+ interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
diff --git a/Bindings/interrupt-controller/loongson,eiointc.yaml b/Bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 0000000..393c128
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description: |
+ This interrupt controller is found on the Loongson-3 family chips and
+ Loongson-2K series chips and is used to distribute interrupts directly to
+ individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k0500-eiointc
+ - loongson,ls2k2000-eiointc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ eiointc: interrupt-controller@1fe11600 {
+ compatible = "loongson,ls2k0500-eiointc";
+ reg = <0x1fe10000 0x10000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/loongson,htpic.yaml b/Bindings/interrupt-controller/loongson,htpic.yaml
new file mode 100644
index 0000000..f0acd56
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,htpic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-3 HyperTransport Interrupt Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+ This interrupt controller is found in the Loongson-3 family of chips to transmit
+ interrupts from PCH PIC connected on HyperTransport bus.
+
+properties:
+ compatible:
+ const: loongson,htpic-1.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ description: |
+ Four parent interrupts that receive chained interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ htintc: interrupt-controller@1fb000080 {
+ compatible = "loongson,htpic-1.0";
+ reg = <0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
diff --git a/Bindings/interrupt-controller/loongson,htvec.yaml b/Bindings/interrupt-controller/loongson,htvec.yaml
new file mode 100644
index 0000000..1d14576
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,htvec.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-3 HyperTransport Interrupt Vector Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+ This interrupt controller is found in the Loongson-3 family of chips for
+ receiving vectorized interrupts from PCH's interrupt controller.
+
+properties:
+ compatible:
+ const: loongson,htvec-1.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: Eight parent interrupts that receive chained interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ htvec: interrupt-controller@fb000080 {
+ compatible = "loongson,htvec-1.0";
+ reg = <0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
diff --git a/Bindings/interrupt-controller/loongson,liointc.yaml b/Bindings/interrupt-controller/loongson,liointc.yaml
new file mode 100644
index 0000000..00b570c
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,liointc.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Local I/O Interrupt Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+ This interrupt controller is found in the Loongson-3 family of chips and
+ Loongson-2K1000 chip, as the primary package interrupt controller which
+ can route local I/O interrupt to interrupt lines of cores.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,liointc-1.0
+ - loongson,liointc-1.0a
+ - loongson,liointc-2.0
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: main
+ - const: isr0
+ - const: isr1
+
+ interrupt-controller: true
+
+ interrupts:
+ description:
+ Interrupt source of the CPU interrupts.
+ minItems: 1
+ maxItems: 4
+
+ interrupt-names:
+ description: List of names for the parent interrupts.
+ items:
+ - const: int0
+ - const: int1
+ - const: int2
+ - const: int3
+ minItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ loongson,parent_int_map:
+ description: |
+ This property points how the children interrupts will be mapped into CPU
+ interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
+ and each bit in the cell refers to a child interrupt from 0 to 31.
+ If a CPU interrupt line didn't connect with liointc, then keep its
+ cell with zero.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 4
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - loongson,parent_int_map
+
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,liointc-2.0
+
+then:
+ properties:
+ reg:
+ minItems: 3
+
+ required:
+ - reg-names
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ iointc: interrupt-controller@3ff01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0x3ff01400 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>;
+ interrupt-names = "int0", "int1";
+
+ loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+ <0x0f000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+
+ };
+
+...
diff --git a/Bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Bindings/interrupt-controller/loongson,ls1x-intc.yaml
new file mode 100644
index 0000000..c60125f
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,ls1x-intc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Interrupt Controller
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+ Loongson-1 interrupt controller is connected to the MIPS core interrupt
+ controller, which controls several groups of interrupts.
+
+properties:
+ compatible:
+ const: loongson,ls1x-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ intc0: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x18>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
diff --git a/Bindings/interrupt-controller/loongson,pch-msi.yaml b/Bindings/interrupt-controller/loongson,pch-msi.yaml
new file mode 100644
index 0000000..a71fc22
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCH MSI Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+ This interrupt controller is found in the Loongson LS7A family of PCH for
+ transforming interrupts from PCIe MSI into HyperTransport vectorized
+ interrupts.
+
+properties:
+ compatible:
+ const: loongson,pch-msi-1.0
+
+ reg:
+ maxItems: 1
+
+ loongson,msi-base-vec:
+ description:
+ u32 value of the base of parent HyperTransport vector allocated
+ to PCH MSI.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ loongson,msi-num-vecs:
+ description:
+ u32 value of the number of parent HyperTransport vectors allocated
+ to PCH MSI.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 256
+
+ msi-controller: true
+
+required:
+ - compatible
+ - reg
+ - msi-controller
+ - loongson,msi-base-vec
+ - loongson,msi-num-vecs
+
+additionalProperties: true # fixme
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ msi: msi-controller@2ff00000 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0x2ff00000 0x4>;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <64>;
+ interrupt-parent = <&htvec>;
+ };
+...
diff --git a/Bindings/interrupt-controller/loongson,pch-pic.yaml b/Bindings/interrupt-controller/loongson,pch-pic.yaml
new file mode 100644
index 0000000..b7bc5cb
--- /dev/null
+++ b/Bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCH PIC Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+ This interrupt controller is found in the Loongson LS7A family of PCH for
+ transforming interrupts from on-chip devices into HyperTransport vectorized
+ interrupts.
+
+properties:
+ compatible:
+ const: loongson,pch-pic-1.0
+
+ reg:
+ maxItems: 1
+
+ loongson,pic-base-vec:
+ description:
+ u32 value of the base of parent HyperTransport vector allocated
+ to PCH PIC.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 192
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - loongson,pic-base-vec
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pic: interrupt-controller@10000000 {
+ compatible = "loongson,pch-pic-1.0";
+ reg = <0x10000000 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ loongson,pic-base-vec = <64>;
+ interrupt-parent = <&htvec>;
+ };
+...
diff --git a/Bindings/interrupt-controller/lsi,zevio-intc.txt b/Bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 0000000..aee38e7
--- /dev/null
+++ b/Bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
diff --git a/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
new file mode 100644
index 0000000..5fc0313
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
@@ -0,0 +1,38 @@
+Marvell Armada 370, 375, 38x, XP Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,mpic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- msi-controller: Identifies the node as an PCI Message Signaled
+ Interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
+ The cell is the IRQ number
+
+- reg: Should contain PMIC registers location and length. First pair
+ for the main interrupt registers, second pair for the per-CPU
+ interrupt registers. For this last pair, to be compliant with SMP
+ support, the "virtual" must be use (For the record, these registers
+ automatically map to the interrupt controller registers of the
+ current CPU)
+
+Optional properties:
+
+- interrupts: If defined, then it indicates that this MPIC is
+ connected as a slave to another interrupt controller. This is
+ typically the case on Armada 375 and Armada 38x, where the MPIC is
+ connected as a slave to the Cortex-A9 GIC. The provided interrupt
+ indicate to which GIC interrupt the MPIC output is connected.
+
+Example:
+
+ mpic: interrupt-controller@d0020000 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ reg = <0xd0020a00 0x1d0>,
+ <0xd0021070 0x58>;
+ };
diff --git a/Bindings/interrupt-controller/marvell,armada-8k-pic.txt b/Bindings/interrupt-controller/marvell,armada-8k-pic.txt
new file mode 100644
index 0000000..86a7b4c
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,armada-8k-pic.txt
@@ -0,0 +1,25 @@
+Marvell Armada 7K/8K PIC Interrupt controller
+---------------------------------------------
+
+This is the Device Tree binding for the PIC, a secondary interrupt
+controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
+typically connected to the GIC as the primary interrupt controller.
+
+Required properties:
+- compatible: should be "marvell,armada-8k-pic"
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: the number of cells to define interrupts on this
+ controller. Should be 1
+- reg: the register area for the PIC interrupt controller
+- interrupts: the interrupt to the primary interrupt controller,
+ typically the GIC
+
+Example:
+
+ pic: interrupt-controller@3f0100 {
+ compatible = "marvell,armada-8k-pic";
+ reg = <0x3f0100 0x10>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Bindings/interrupt-controller/marvell,gicp.txt b/Bindings/interrupt-controller/marvell,gicp.txt
new file mode 100644
index 0000000..64a00ce
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,gicp.txt
@@ -0,0 +1,27 @@
+Marvell GICP Controller
+-----------------------
+
+GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
+interrupts by doing a memory transaction. It is used by the ICU
+located in the Marvell CP110 to turn wired interrupts inside the CP
+into GIC SPI interrupts.
+
+Required properties:
+
+- compatible: Must be "marvell,ap806-gicp"
+
+- reg: Must be the address and size of the GICP SPI registers
+
+- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available
+ for this GICP
+
+- msi-controller: indicates that this is an MSI controller
+
+Example:
+
+gicp_spi: gicp-spi@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+};
diff --git a/Bindings/interrupt-controller/marvell,icu.txt b/Bindings/interrupt-controller/marvell,icu.txt
new file mode 100644
index 0000000..1c94a57
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,icu.txt
@@ -0,0 +1,112 @@
+Marvell ICU Interrupt Controller
+--------------------------------
+
+The Marvell ICU (Interrupt Consolidation Unit) controller is
+responsible for collecting all wired-interrupt sources in the CP and
+communicating them to the GIC in the AP, the unit translates interrupt
+requests on input wires to MSG memory mapped transactions to the GIC.
+These messages will access a different GIC memory area depending on
+their type (NSR, SR, SEI, REI, etc).
+
+Required properties:
+
+- compatible: Should be "marvell,cp110-icu"
+
+- reg: Should contain ICU registers location and length.
+
+Subnodes: Each group of interrupt is declared as a subnode of the ICU,
+with their own compatible.
+
+Required properties for the icu_nsr/icu_sei subnodes:
+
+- compatible: Should be one of:
+ * "marvell,cp110-icu-nsr"
+ * "marvell,cp110-icu-sr"
+ * "marvell,cp110-icu-sei"
+ * "marvell,cp110-icu-rei"
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+
+ The 1st cell is the index of the interrupt in the ICU unit.
+
+ The 2nd cell is the type of the interrupt. See arm,gic.txt for
+ details.
+
+- interrupt-controller: Identifies the node as an interrupt
+ controller.
+
+- msi-parent: Should point to the GICP controller, the GIC extension
+ that allows to trigger interrupts using MSG memory mapped
+ transactions.
+
+Note: each 'interrupts' property referring to any 'icu_xxx' node shall
+ have a different number within [0:206].
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
+};
+
+node1 {
+ interrupt-parent = <&icu_nsr>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+node2 {
+ interrupt-parent = <&icu_sei>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Would not work with the above nodes */
+node3 {
+ interrupt-parent = <&icu_nsr>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+The legacy bindings were different in this way:
+
+- #interrupt-cells: The value was 3.
+ The 1st cell was the group type of the ICU interrupt. Possible
+ group types were:
+ ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
+ ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure
+ ICU_GRP_SEI (0x4) : System error interrupt
+ ICU_GRP_REI (0x5) : RAM error interrupt
+ The 2nd cell was the index of the interrupt in the ICU unit.
+ The 3rd cell was the type of the interrupt. See arm,gic.txt for
+ details.
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x440>;
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+};
+
+node1 {
+ interrupt-parent = <&icu>;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Bindings/interrupt-controller/marvell,odmi-controller.txt b/Bindings/interrupt-controller/marvell,odmi-controller.txt
new file mode 100644
index 0000000..0ebfc95
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -0,0 +1,42 @@
+
+* Marvell ODMI for MSI support
+
+Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
+which can be used by on-board peripheral for MSI interrupts.
+
+Required properties:
+
+- compatible : The value here should contain:
+
+ "marvell,ap806-odmi-controller", "marvell,odmi-controller".
+
+- interrupt,controller : Identifies the node as an interrupt controller.
+
+- msi-controller : Identifies the node as an MSI controller.
+
+- marvell,odmi-frames : Number of ODMI frames available. Each frame
+ provides a number of events.
+
+- reg : List of register definitions, one for each
+ ODMI frame.
+
+- marvell,spi-base : List of GIC base SPI interrupts, one for each
+ ODMI frame. Those SPI interrupts are 0-based,
+ i.e marvell,spi-base = <128> will use SPI #96.
+ See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+ for details about the GIC Device Tree binding.
+
+Example:
+
+ odmi: odmi@300000 {
+ compatible = "marvell,ap806-odmi-controller",
+ "marvell,odmi-controller";
+ interrupt-controller;
+ msi-controller;
+ marvell,odmi-frames = <4>;
+ reg = <0x300000 0x4000>,
+ <0x304000 0x4000>,
+ <0x308000 0x4000>,
+ <0x30C000 0x4000>;
+ marvell,spi-base = <128>, <136>, <144>, <152>;
+ };
diff --git a/Bindings/interrupt-controller/marvell,orion-intc.txt b/Bindings/interrupt-controller/marvell,orion-intc.txt
new file mode 100644
index 0000000..2c11ac7
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,orion-intc.txt
@@ -0,0 +1,48 @@
+Marvell Orion SoC interrupt controllers
+
+* Main interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-intc"
+- reg: base address(es) of interrupt registers starting with CAUSE register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of first base address,
+- 1 maps to bit 1 of first base address,
+- 32 maps to bit 0 of second base address, and so on.
+
+Example:
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ /* Dove has 64 first level interrupts */
+ reg = <0x20200 0x10>, <0x20210 0x10>;
+ };
+
+* Bridge interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-bridge-intc"
+- reg: base address of bridge interrupt registers starting with CAUSE register
+- interrupts: bridge interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Optional properties:
+- marvell,#interrupts: number of interrupts provided by bridge interrupt
+ controller, defaults to 32 if not set
+
+Example:
+ bridge_intc: interrupt-controller {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ /* Dove bridge provides 5 interrupts */
+ marvell,#interrupts = <5>;
+ };
diff --git a/Bindings/interrupt-controller/marvell,sei.txt b/Bindings/interrupt-controller/marvell,sei.txt
new file mode 100644
index 0000000..0beafed
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,sei.txt
@@ -0,0 +1,36 @@
+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs.
+
+Required properties:
+
+- compatible: should be one of:
+ * "marvell,ap806-sei"
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+ coming from the AP, should be 1. The cell is the IRQ
+ number.
+- interrupt-controller: identifies the node as an interrupt controller
+ for AP interrupts.
+- msi-controller: identifies the node as an MSI controller for the CPs
+ interrupts.
+
+Example:
+
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
diff --git a/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 0000000..fdcb4d8
--- /dev/null
+++ b/Bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+ - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+ In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+ work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+ The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+ to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+ interrupts and generate a pulse signal to parent interrupt controller when
+ flush command is executed. With CIRQ, MCUSYS can be completely turned off
+ to improve the system power consumption without losing interrupts.
+
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt2701-cirq
+ - mediatek,mt8135-cirq
+ - mediatek,mt8173-cirq
+ - mediatek,mt8192-cirq
+ - const: mediatek,mtk-cirq
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 3
+
+ interrupt-controller: true
+
+ mediatek,ext-irq-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: First CIRQ interrupt
+ - description: Last CIRQ interrupt
+ description:
+ Identifies the range of external interrupts in different SoCs
+
+required:
+ - compatible
+ - reg
+ - '#interrupt-cells'
+ - interrupt-controller
+ - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ cirq: interrupt-controller@10204000 {
+ compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+ reg = <0x10204000 0x400>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&sysirq>;
+ mediatek,ext-irq-range = <32 200>;
+ };
diff --git a/Bindings/interrupt-controller/mediatek,sysirq.txt b/Bindings/interrupt-controller/mediatek,sysirq.txt
new file mode 100644
index 0000000..3ffc601
--- /dev/null
+++ b/Bindings/interrupt-controller/mediatek,sysirq.txt
@@ -0,0 +1,44 @@
+MediaTek sysirq
+
+MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+interrupt.
+
+Required properties:
+- compatible: should be
+ "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
+ "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
+ "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
+ "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
+ "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
+ "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+ "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
+ "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
+ "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
+ "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+ "mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
+ "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
+ "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
+ "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
+ "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
+ "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
+ "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
+ "mediatek,mt6577-sysirq": for MT6577
+ "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
+ "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
+ "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
+- reg: Physical base address of the intpol registers and length of memory
+ mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
+ need 1.
+
+Example:
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6797-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220620 0 0x20>,
+ <0 0x10220690 0 0x10>;
+ };
diff --git a/Bindings/interrupt-controller/microchip,pic32-evic.txt b/Bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 0000000..c3a1b37
--- /dev/null
+++ b/Bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+ source connected to this controller. The value shall be 2 and interrupt
+ descriptor shall have the following format:
+
+ <hw_irq irq_type>
+
+ hw_irq - represents the hardware interrupt number as in the data sheet.
+ irq_type - is used to describe the type and polarity of an interrupt. For
+ internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+ IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+ IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+ polarity configuration. This array corresponds to the bits in the INTCON
+ SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+ microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ ...
+};
diff --git a/Bindings/interrupt-controller/microchip,sama7g5-eic.yaml b/Bindings/interrupt-controller/microchip,sama7g5-eic.yaml
new file mode 100644
index 0000000..d56ba65
--- /dev/null
+++ b/Bindings/interrupt-controller/microchip,sama7g5-eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+ This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+ support for handling up to 2 external interrupt lines.
+
+properties:
+ compatible:
+ enum:
+ - microchip,sama7g5-eic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the input IRQ number (between 0 and 1), the second cell
+ is the trigger type as defined in interrupt.txt present in this directory.
+
+ interrupts:
+ description: |
+ Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+ should be specified sequentially from output 0 to output 1.
+ minItems: 2
+ maxItems: 2
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: pclk
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ eic: interrupt-controller@e1628000 {
+ compatible = "microchip,sama7g5-eic";
+ reg = <0xe1628000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+ clock-names = "pclk";
+ };
+
+...
diff --git a/Bindings/interrupt-controller/mrvl,intc.yaml b/Bindings/interrupt-controller/mrvl,intc.yaml
new file mode 100644
index 0000000..b7c5022
--- /dev/null
+++ b/Bindings/interrupt-controller/mrvl,intc.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP/Orion Interrupt controller
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: marvell,orion-intc
+ then:
+ required:
+ - mrvl,intc-nr-irqs
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mrvl,mmp-intc
+ - mrvl,mmp2-intc
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,mmp3-intc
+ - mrvl,mmp2-mux-intc
+ then:
+ properties:
+ reg:
+ minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mrvl,mmp2-mux-intc
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ reg-names:
+ items:
+ - const: mux status
+ - const: mux mask
+ required:
+ - interrupts
+ else:
+ properties:
+ interrupts: false
+
+properties:
+ '#interrupt-cells':
+ const: 1
+
+ compatible:
+ enum:
+ - mrvl,mmp-intc
+ - mrvl,mmp2-intc
+ - marvell,mmp3-intc
+ - marvell,orion-intc
+ - mrvl,mmp2-mux-intc
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names: true
+
+ interrupts: true
+
+ interrupt-controller: true
+
+ mrvl,intc-nr-irqs:
+ description: |
+ Specifies the number of interrupts in the interrupt controller.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mrvl,clr-mfp-irq:
+ description: |
+ Specifies the interrupt that needs to clear MFP edge detection first.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - '#interrupt-cells'
+ - compatible
+ - reg
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@d4282000 {
+ compatible = "mrvl,mmp2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ interrupt-controller@d4282150 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x150 0x4>, <0x168 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+ - |
+ interrupt-controller@fed20204 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xfed20204 0x04>,
+ <0xfed20214 0x04>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
new file mode 100644
index 0000000..4ff609f
--- /dev/null
+++ b/Bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SoC ICPU Interrupt Controller
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+ the Microsemi Ocelot interrupt controller that is part of the
+ ICPU. It is connected directly to the MIPS core interrupt
+ controller.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mscc,jaguar2-icpu-intr
+ - mscc,luton-icpu-intr
+ - mscc,ocelot-icpu-intr
+ - mscc,serval-icpu-intr
+
+
+ '#interrupt-cells':
+ const: 1
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ intc: interrupt-controller@70000070 {
+ compatible = "mscc,ocelot-icpu-intr";
+ reg = <0x70000070 0x70>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+...
diff --git a/Bindings/interrupt-controller/msi-controller.yaml b/Bindings/interrupt-controller/msi-controller.yaml
new file mode 100644
index 0000000..449d606
--- /dev/null
+++ b/Bindings/interrupt-controller/msi-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSI controller
+
+maintainers:
+ - Marc Zyngier <maz@kernel.org>
+
+description: |
+ An MSI controller signals interrupts to a CPU when a write is made
+ to an MMIO address by some master. An MSI controller may feature a
+ number of doorbells.
+
+properties:
+ "#msi-cells":
+ description: |
+ The number of cells in an msi-specifier, required if not zero.
+
+ Typically this will encode information related to sideband data,
+ and will not encode doorbells or payloads as these can be
+ configured dynamically.
+
+ The meaning of the msi-specifier is defined by the device tree
+ binding of the specific MSI controller.
+ enum: [0, 1]
+
+ msi-controller:
+ description:
+ Identifies the node as an MSI controller.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ msi-ranges:
+ description:
+ A list of <phandle intspec span> tuples, where "phandle" is the
+ parent interrupt controller, "intspec" is the starting/base
+ interrupt specifier and "span" is the size of the
+ range. Multiple ranges can be provided.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+dependencies:
+ "#msi-cells": [ msi-controller ]
+
+additionalProperties: true
diff --git a/Bindings/interrupt-controller/msi.txt b/Bindings/interrupt-controller/msi.txt
new file mode 100644
index 0000000..c20b51d
--- /dev/null
+++ b/Bindings/interrupt-controller/msi.txt
@@ -0,0 +1,135 @@
+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+
+ Devices may be configured by software to write to arbitrary doorbells which
+ they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+
+ Devices may be configured to write an arbitrary payload chosen by software.
+ MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+
+ Typically this is neither configurable nor probeable, and depends on the path
+ taken through the memory system (i.e. it is a property of the combination of
+ MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+ Typically this will encode information related to sideband data, and will
+ not encode doorbells or payloads as these can be configured dynamically.
+
+ The meaning of the msi-specifier is defined by the device tree binding of
+ the specific MSI controller.
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+ controller which the device is capable of using.
+
+ This property is unordered, and MSIs may be allocated from any combination of
+ MSI controllers listed in the msi-parent property.
+
+ If a device has restrictions on the allocation of MSIs, these restrictions
+ must be described with additional properties.
+
+ When #msi-cells is non-zero, busses with an msi-parent will require
+ additional properties to describe the relationship between devices on the bus
+ and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0xf00>;
+ compatible = "vendor-a,some-controller";
+ msi-controller;
+ /* No sideband data, so #msi-cells omitted */
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xc 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ dev@0 {
+ reg = <0x0 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /* Can only generate MSIs to msi_a */
+ msi-parent = <&msi_a>;
+ };
+
+ dev@1 {
+ reg = <0x1 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /*
+ * Can generate MSIs to either A or B.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>;
+ };
+
+ dev@2 {
+ reg = <0x2 0xf00>;
+ compatible = "vendor-c,some-device";
+ /*
+ * Has different IDs at each MSI controller.
+ * Can generate MSIs to all of the MSI controllers.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+ };
+};
diff --git a/Bindings/interrupt-controller/mstar,mst-intc.yaml b/Bindings/interrupt-controller/mstar,mst-intc.yaml
new file mode 100644
index 0000000..bbf0f26
--- /dev/null
+++ b/Bindings/interrupt-controller/mstar,mst-intc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Interrupt Controller
+
+maintainers:
+ - Mark-PK Tsai <mark-pk.tsai@mediatek.com>
+
+description: |+
+ MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy
+ interrupt controllers that routes interrupts to the GIC.
+
+ The HW block exposes a number of interrupt controllers, each
+ can support up to 64 interrupts.
+
+properties:
+ compatible:
+ const: mstar,mst-intc
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ Use the same format as specified by GIC in arm,gic.yaml.
+
+ reg:
+ maxItems: 1
+
+ mstar,irqs-map-range:
+ description: |
+ The range <start, end> of parent interrupt controller's interrupt
+ lines that are hardwired to mstar interrupt controller.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ mstar,intc-no-eoi:
+ description:
+ Mark this controller has no End Of Interrupt(EOI) implementation.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - mstar,irqs-map-range
+
+additionalProperties: false
+
+examples:
+ - |
+ mst_intc0: interrupt-controller@1f2032d0 {
+ compatible = "mstar,mst-intc";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x1f2032d0 0x30>;
+ mstar,irqs-map-range = <0 63>;
+ };
+...
diff --git a/Bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 0000000..46a1f5f
--- /dev/null
+++ b/Bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+ On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+ IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+ With the irq_domain in place we can describe how the 8 IRQs are wired to the
+ platforms internal interrupt controller cascade.
+
+maintainers:
+ - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+ compatible:
+ const: mti,cpu-interrupt-controller
+
+ '#interrupt-cells':
+ const: 1
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+
+examples:
+ - |
+ interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
diff --git a/Bindings/interrupt-controller/mti,gic.yaml b/Bindings/interrupt-controller/mti,gic.yaml
new file mode 100644
index 0000000..91bb3c2
--- /dev/null
+++ b/Bindings/interrupt-controller/mti,gic.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+ - Paul Burton <paulburton@kernel.org>
+ - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+ The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+ It also supports local (per-processor) interrupts and software-generated
+ interrupts which can be used as IPIs. The GIC also includes a free-running
+ global timer, per-CPU count/compare timers, and a watchdog.
+
+properties:
+ compatible:
+ const: mti,gic
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ The 1st cell is the type of interrupt: local or shared defined in the
+ file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+ GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+ the IRQ trigger modes, which are defined in the file
+ 'dt-bindings/interrupt-controller/irq.h'.
+
+ reg:
+ description: |
+ Base address and length of the GIC registers space. If not present,
+ the base address reported by the hardware GCR_GIC_BASE will be used.
+ maxItems: 1
+
+ interrupt-controller: true
+
+ mti,reserved-cpu-vectors:
+ description: |
+ Specifies the list of CPU interrupt vectors to which the GIC may not
+ route interrupts. This property is ignored if the CPU is started in EIC
+ mode.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ uniqueItems: true
+ items:
+ minimum: 2
+ maximum: 7
+
+ mti,reserved-ipi-vectors:
+ description: |
+ Specifies the range of GIC interrupts that are reserved for IPIs.
+ It accepts two values: the 1st is the starting interrupt and the 2nd is
+ the size of the reserved range. If not specified, the driver will
+ allocate the last (2 * number of VPEs in the system).
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - minimum: 0
+ maximum: 254
+ - minimum: 2
+ maximum: 254
+
+ timer:
+ type: object
+ description: |
+ MIPS GIC includes a free-running global timer, per-CPU count/compare
+ timers, and a watchdog. Currently only the GIC Timer is supported.
+ properties:
+ compatible:
+ const: mti,gic-timer
+
+ interrupts:
+ description: |
+ Interrupt for the GIC local timer, so normally it's suppose to be of
+ <GIC_LOCAL X IRQ_TYPE_NONE> format.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency: true
+
+ required:
+ - compatible
+ - interrupts
+
+ oneOf:
+ - required:
+ - clocks
+ - required:
+ - clock-frequency
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#interrupt-cells"
+ - interrupt-controller
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ mti,reserved-cpu-vectors = <7>;
+ mti,reserved-ipi-vectors = <40 8>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clock-frequency = <50000000>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&cpu_pll>;
+ };
+ };
+ - |
+ interrupt-controller {
+ compatible = "mti,gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+...
diff --git a/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
new file mode 100644
index 0000000..2d6307a
--- /dev/null
+++ b/Bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Advanced Interrupt Controller
+
+maintainers:
+ - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+ '#interrupt-cells':
+ const: 2
+
+ compatible:
+ const: nuvoton,wpcm450-aic
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - '#interrupt-cells'
+ - compatible
+ - reg
+ - interrupt-controller
+
+examples:
+ - |
+ aic: interrupt-controller@b8002000 {
+ compatible = "nuvoton,wpcm450-aic";
+ reg = <0xb8002000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
new file mode 100644
index 0000000..2ff3566
--- /dev/null
+++ b/Bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -0,0 +1,41 @@
+NVIDIA Legacy Interrupt Controller
+
+All Tegra SoCs contain a legacy interrupt controller that routes
+interrupts to the GIC, and also serves as a wakeup source. It is also
+referred to as "ictlr", hence the name of the binding.
+
+The HW block exposes a number of interrupt controllers, each
+implementing a set of 32 interrupts.
+
+Required properties:
+
+- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
+ subsequent SoCs remained backwards-compatible with Tegra30, so on
+ Tegra generations later than Tegra30 the compatible value should
+ include "nvidia,tegra30-ictlr".
+- reg : Specifies base physical address and size of the registers.
+ Each controller must be described separately (Tegra20 has 4 of them,
+ whereas Tegra30 and later have 5).
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+ are explicitly forbidden.
+
+Example:
+
+ ictlr: interrupt-controller@60004000 {
+ compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
+ reg = <0x60004000 64>,
+ <0x60004100 64>,
+ <0x60004200 64>,
+ <0x60004300 64>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ };
diff --git a/Bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Bindings/interrupt-controller/nxp,lpc3220-mic.txt
new file mode 100644
index 0000000..0bfb3ba
--- /dev/null
+++ b/Bindings/interrupt-controller/nxp,lpc3220-mic.txt
@@ -0,0 +1,58 @@
+* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
+
+Required properties:
+- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
+- reg: should contain IC registers location and length.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: the number of cells to define an interrupt, should be 2.
+ The first cell is the IRQ number, the second cell is used to specify
+ one of the supported IRQ types:
+ IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
+ IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
+ IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
+ IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
+ Reset value is IRQ_TYPE_LEVEL_LOW.
+
+Optional properties:
+- interrupts: empty for MIC interrupt controller, cascaded MIC
+ hardware interrupts for SIC1 and SIC2
+
+Examples:
+
+ /* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ reg = <0x40008000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sic1: interrupt-controller@4000c000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x4000c000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+ <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sic2: interrupt-controller@40010000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x40010000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+ <31 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ /* ADC */
+ adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Bindings/interrupt-controller/open-pic.txt b/Bindings/interrupt-controller/open-pic.txt
new file mode 100644
index 0000000..ccbbfdc
--- /dev/null
+++ b/Bindings/interrupt-controller/open-pic.txt
@@ -0,0 +1,97 @@
+* Open PIC Binding
+
+This binding specifies what properties must be available in the device tree
+representation of an Open PIC compliant interrupt controller. This binding is
+based on the binding defined for Open PIC in [1] and is a superset of that
+binding.
+
+Required properties:
+
+ NOTE: Many of these descriptions were paraphrased here from [1] to aid
+ readability.
+
+ - compatible: Specifies the compatibility list for the PIC. The type
+ shall be <string> and the value shall include "open-pic".
+
+ - reg: Specifies the base physical address(s) and size(s) of this
+ PIC's addressable register space. The type shall be <prop-encoded-array>.
+
+ - interrupt-controller: The presence of this property identifies the node
+ as an Open PIC. No property value shall be defined.
+
+ - #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 2.
+
+ - #address-cells: Specifies the number of cells needed to encode an
+ address. The type shall be <u32> and the value shall be 0. As such,
+ 'interrupt-map' nodes do not have to specify a parent unit address.
+
+Optional properties:
+
+ - pic-no-reset: The presence of this property indicates that the PIC
+ shall not be reset during runtime initialization. No property value shall
+ be defined. The presence of this property also mandates that any
+ initialization related to interrupt sources shall be limited to sources
+ explicitly referenced in the device tree.
+
+* Interrupt Specifier Definition
+
+ Interrupt specifiers consists of 2 cells encoded as
+ follows:
+
+ - <1st-cell>: The interrupt-number that identifies the interrupt source.
+
+ - <2nd-cell>: The level-sense information, encoded as follows:
+ 0 = low-to-high edge triggered
+ 1 = active low level-sensitive
+ 2 = active high level-sensitive
+ 3 = high-to-low edge triggered
+
+* Examples
+
+Example 1:
+
+ /*
+ * An Open PIC interrupt controller
+ */
+ mpic: pic@40000 {
+ // This is an interrupt controller node.
+ interrupt-controller;
+
+ // No address cells so that 'interrupt-map' nodes which reference
+ // this Open PIC node do not need a parent address specifier.
+ #address-cells = <0>;
+
+ // Two cells to encode interrupt sources.
+ #interrupt-cells = <2>;
+
+ // Offset address of 0x40000 and size of 0x40000.
+ reg = <0x40000 0x40000>;
+
+ // Compatible with Open PIC.
+ compatible = "open-pic";
+
+ // The PIC shall not be reset.
+ pic-no-reset;
+ };
+
+Example 2:
+
+ /*
+ * An interrupt generating device that is wired to an Open PIC.
+ */
+ serial0: serial@4500 {
+ // Interrupt source '42' that is active high level-sensitive.
+ // Note that there are only two cells as specified in the interrupt
+ // parent's '#interrupt-cells' property.
+ interrupts = <42 2>;
+
+ // The interrupt controller that this device is wired to.
+ interrupt-parent = <&mpic>;
+ };
+
+* References
+
+[1] Devicetree Specification
+ (https://www.devicetree.org/specifications/)
+
diff --git a/Bindings/interrupt-controller/opencores,or1k-pic.txt b/Bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 0000000..55c04fa
--- /dev/null
+++ b/Bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+ level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+ edge triggered interrupt lines or "opencores,or1200-pic" for machines
+ with the non-spec compliant or1200 type implementation.
+
+ "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+ but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "opencores,or1k-pic-level";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/Bindings/interrupt-controller/openrisc,ompic.txt b/Bindings/interrupt-controller/openrisc,ompic.txt
new file mode 100644
index 0000000..caec07c
--- /dev/null
+++ b/Bindings/interrupt-controller/openrisc,ompic.txt
@@ -0,0 +1,22 @@
+Open Multi-Processor Interrupt Controller
+
+Required properties:
+
+- compatible : This should be "openrisc,ompic"
+- reg : Specifies base physical address and size of the register space. The
+ size is based on the number of cores the controller has been configured
+ to handle, this should be set to 8 bytes per cpu core.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : This should be set to 0 as this will not be an irq
+ parent.
+- interrupts : Specifies the interrupt line to which the ompic is wired.
+
+Example:
+
+ompic: interrupt-controller@98000000 {
+ compatible = "openrisc,ompic";
+ reg = <0x98000000 16>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupts = <1>;
+};
diff --git a/Bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Bindings/interrupt-controller/qca,ath79-cpu-intc.txt
new file mode 100644
index 0000000..aabce78
--- /dev/null
+++ b/Bindings/interrupt-controller/qca,ath79-cpu-intc.txt
@@ -0,0 +1,44 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
+
+On most SoC the IRQ controller need to flush the DDR FIFO before running
+the interrupt handler of some devices. This is configured using the
+qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+Required Properties:
+
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
+ as fallback
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1 for intc
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Optional Properties:
+
+- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
+ buffer flush
+- qca,ddr-wb-channels: List of phandles to the write buffer channels for
+ each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
+ default to the entry's index.
+
+Example:
+
+ interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ...
+
+ ddr_ctrl: memory-controller@18000000 {
+ ...
+ #qca,ddr-wb-channel-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Bindings/interrupt-controller/qca,ath79-misc-intc.txt
new file mode 100644
index 0000000..ad70006
--- /dev/null
+++ b/Bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -0,0 +1,45 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+The MISC interrupt controller is a secondary controller for lower priority
+interrupt.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
+ "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
+- reg: Base address and size of the controllers memory area
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1
+
+Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
+use ar7240 for all other SoCs.
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+Another example:
+
+ interrupt-controller@18060010 {
+ compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/qcom,mpm.yaml b/Bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 0000000..6a20611
--- /dev/null
+++ b/Bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+ Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+ MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+ resources during sleep, the hardware also has an interrupt controller that
+ monitors the interrupts when the system is asleep, wakes up the APSS when
+ one of these interrupts occur and replays it to GIC interrupt controller
+ after GIC becomes operational.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,mpm
+
+ reg:
+ maxItems: 1
+ description:
+ Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+ interrupts:
+ maxItems: 1
+ description:
+ Specify the IRQ used by RPM to wakeup APSS.
+
+ mboxes:
+ maxItems: 1
+ description:
+ Specify the mailbox used to notify RPM for writing vMPM registers.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the MPM pin number for the interrupt, and the second
+ is the trigger type.
+
+ qcom,mpm-pin-count:
+ description:
+ Specify the total MPM pin count that a SoC supports.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,mpm-pin-map:
+ description:
+ A set of MPM pin numbers and the corresponding GIC SPIs.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: MPM pin number
+ - description: GIC SPI number for the MPM pin
+
+ '#power-domain-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+ - interrupt-controller
+ - '#interrupt-cells'
+ - qcom,mpm-pin-count
+ - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mpm: interrupt-controller@45f01b8 {
+ compatible = "qcom,mpm";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x45f01b8 0x1000>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <2 275>,
+ <5 296>,
+ <12 422>,
+ <24 79>,
+ <86 183>,
+ <90 260>,
+ <91 260>;
+ #power-domain-cells = <0>;
+ };
diff --git a/Bindings/interrupt-controller/qcom,pdc.yaml b/Bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 0000000..86d6189
--- /dev/null
+++ b/Bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+ Power Domain Controller (PDC) that is on always-on domain. In addition to
+ providing power control for the power domains, the hardware also has an
+ interrupt controller that can be used to help detect edge low interrupts as
+ well detect interrupts when the GIC is non-operational.
+
+ GIC is parent interrupt controller at the highest level. Platform interrupt
+ controller PDC is next in hierarchy, followed by others. Drivers requiring
+ wakeup capabilities of their device interrupts routed through the PDC, must
+ specify PDC as their interrupt controller and request the PDC port associated
+ with the GIC interrupt. See example below.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,qdu1000-pdc
+ - qcom,sa8775p-pdc
+ - qcom,sc7180-pdc
+ - qcom,sc7280-pdc
+ - qcom,sc8280xp-pdc
+ - qcom,sdm670-pdc
+ - qcom,sdm845-pdc
+ - qcom,sdx55-pdc
+ - qcom,sdx65-pdc
+ - qcom,sm4450-pdc
+ - qcom,sm6350-pdc
+ - qcom,sm8150-pdc
+ - qcom,sm8250-pdc
+ - qcom,sm8350-pdc
+ - qcom,sm8450-pdc
+ - const: qcom,pdc
+
+ reg:
+ minItems: 1
+ items:
+ - description: PDC base register region
+ - description: Edge or Level config register for SPI interrupts
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ qcom,pdc-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 1
+ maxItems: 128 # no hard limit
+ items:
+ items:
+ - description: starting PDC port
+ - description: GIC hwirq number for the PDC port
+ - description: number of interrupts in sequence
+ description: |
+ Specifies the PDC pin offset and the number of PDC ports.
+ The tuples indicates the valid mapping of valid PDC ports
+ and their hwirq mapping.
+
+required:
+ - compatible
+ - reg
+ - '#interrupt-cells'
+ - interrupt-controller
+ - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sdm845-pdc", "qcom,pdc";
+ reg = <0xb220000 0x30000>;
+ qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ wake-device {
+ interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Bindings/interrupt-controller/ralink,rt2880-intc.yaml
new file mode 100644
index 0000000..0fa952a
--- /dev/null
+++ b/Bindings/interrupt-controller/ralink,rt2880-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+ This interrupt controller support a central point for interrupt aggregation
+ for platform related blocks.
+
+properties:
+ compatible:
+ const: ralink,rt2880-intc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+...
diff --git a/Bindings/interrupt-controller/rda,8810pl-intc.yaml b/Bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 0000000..96d6285
--- /dev/null
+++ b/Bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: rda,8810pl-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ intc: interrupt-controller@0 {
+ compatible = "rda,8810pl-intc";
+ reg = <0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+...
diff --git a/Bindings/interrupt-controller/realtek,rtl-intc.yaml b/Bindings/interrupt-controller/realtek,rtl-intc.yaml
new file mode 100644
index 0000000..fb55937
--- /dev/null
+++ b/Bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL SoC interrupt controller
+
+description:
+ Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+ interrupt to be routed to one parent CPU (hardware) interrupt, or left
+ disconnected.
+ All connected input lines from SoC peripherals can be masked individually,
+ and an interrupt status register is present to indicate which interrupts are
+ pending.
+
+maintainers:
+ - Birger Koblitz <mail@birger-koblitz.de>
+ - Bert Vermeulen <bert@biot.com>
+ - John Crispin <john@phrozen.org>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - realtek,rtl8380-intc
+ - const: realtek,rtl-intc
+ - const: realtek,rtl-intc
+ deprecated: true
+
+ "#interrupt-cells":
+ description:
+ SoC interrupt line index.
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 15
+ description:
+ List of parent interrupts, in the order that they are connected to this
+ interrupt router's outputs, starting at the first output.
+
+ interrupt-controller: true
+
+ interrupt-map:
+ deprecated: true
+ description: Describes mapping from SoC interrupts to CPU interrupts
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - interrupt-controller
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: realtek,rtl-intc
+ then:
+ properties:
+ "#address-cells":
+ const: 0
+ required:
+ - "#address-cells"
+ - interrupt-map
+ else:
+ required:
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@3000 {
+ compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x3000 0x18>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>;
+ };
diff --git a/Bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Bindings/interrupt-controller/renesas,intc-irqpin.yaml
new file mode 100644
index 0000000..f4aae56
--- /dev/null
+++ b/Bindings/interrupt-controller/renesas,intc-irqpin.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Interrupt Controller (INTC) for external pins
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,intc-irqpin-r8a7740 # R-Mobile A1
+ - renesas,intc-irqpin-r8a7778 # R-Car M1A
+ - renesas,intc-irqpin-r8a7779 # R-Car H1
+ - renesas,intc-irqpin-sh73a0 # SH-Mobile AG5
+ - const: renesas,intc-irqpin
+
+ reg:
+ minItems: 5
+ items:
+ - description: Interrupt control register
+ - description: Interrupt priority register
+ - description: Interrupt source register
+ - description: Interrupt mask register
+ - description: Interrupt mask clear register
+ - description: Interrupt control register for ICR0 with IRLM0 bit
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ sense-bitfield-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 4]
+ default: 4
+ description:
+ Width of a single sense bitfield in the SENSE register, if different from the
+ default.
+
+ control-parent:
+ type: boolean
+ description:
+ Disable and enable interrupts on the parent interrupt controller, needed for some
+ broken implementations.
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,intc-irqpin-r8a7740
+ - renesas,intc-irqpin-sh73a0
+then:
+ required:
+ - clocks
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ irqpin1: interrupt-controller@e6900004 {
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+ reg = <0xe6900004 4>,
+ <0xe6900014 4>,
+ <0xe6900024 1>,
+ <0xe6900044 1>,
+ <0xe6900064 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
+ };
diff --git a/Bindings/interrupt-controller/renesas,irqc.yaml b/Bindings/interrupt-controller/renesas,irqc.yaml
new file mode 100644
index 0000000..b417341
--- /dev/null
+++ b/Bindings/interrupt-controller/renesas,irqc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Mobile/R-Car/RZ/G interrupt controller
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,irqc-r8a73a4 # R-Mobile APE6
+ - renesas,irqc-r8a7742 # RZ/G1H
+ - renesas,irqc-r8a7743 # RZ/G1M
+ - renesas,irqc-r8a7744 # RZ/G1N
+ - renesas,irqc-r8a7745 # RZ/G1E
+ - renesas,irqc-r8a77470 # RZ/G1C
+ - renesas,irqc-r8a7790 # R-Car H2
+ - renesas,irqc-r8a7791 # R-Car M2-W
+ - renesas,irqc-r8a7792 # R-Car V2H
+ - renesas,irqc-r8a7793 # R-Car M2-N
+ - renesas,irqc-r8a7794 # R-Car E2
+ - renesas,intc-ex-r8a774a1 # RZ/G2M
+ - renesas,intc-ex-r8a774b1 # RZ/G2N
+ - renesas,intc-ex-r8a774c0 # RZ/G2E
+ - renesas,intc-ex-r8a774e1 # RZ/G2H
+ - renesas,intc-ex-r8a7795 # R-Car H3
+ - renesas,intc-ex-r8a7796 # R-Car M3-W
+ - renesas,intc-ex-r8a77961 # R-Car M3-W+
+ - renesas,intc-ex-r8a77965 # R-Car M3-N
+ - renesas,intc-ex-r8a77970 # R-Car V3M
+ - renesas,intc-ex-r8a77980 # R-Car V3H
+ - renesas,intc-ex-r8a77990 # R-Car E3
+ - renesas,intc-ex-r8a77995 # R-Car D3
+ - renesas,intc-ex-r8a779a0 # R-Car V3U
+ - renesas,intc-ex-r8a779f0 # R-Car S4-8
+ - renesas,intc-ex-r8a779g0 # R-Car V4H
+ - const: renesas,irqc
+
+ '#interrupt-cells':
+ # an interrupt index and flags, as defined in interrupts.txt in
+ # this directory
+ const: 2
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 32
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ irqc0: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe61c0000 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ };
diff --git a/Bindings/interrupt-controller/renesas,rza1-irqc.yaml b/Bindings/interrupt-controller/renesas,rza1-irqc.yaml
new file mode 100644
index 0000000..755cdfa
--- /dev/null
+++ b/Bindings/interrupt-controller/renesas,rza1-irqc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rza1-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 Interrupt Controller
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas RZ/A1 and
+ RZ/A2 SoCs:
+ - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI interrupts,
+ - NMI edge select.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r7s72100-irqc # RZ/A1H
+ - renesas,r7s9210-irqc # RZ/A2M
+ - const: renesas,rza1-irqc
+
+ '#interrupt-cells':
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupt-map:
+ maxItems: 8
+ description: Specifies the mapping from external interrupts to GIC interrupts.
+
+ interrupt-map-mask:
+ items:
+ - const: 7
+ - const: 0
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupt-map
+ - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ irqc: interrupt-controller@fcfef800 {
+ compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xfcfef800 0x6>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <7 0>;
+ };
diff --git a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 0000000..2ef3081
--- /dev/null
+++ b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ IA55 performs various interrupt controls including synchronization for the external
+ interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+ interrupts output by each IP. And it notifies the interrupt to the GIC
+ - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+ - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+ - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+ stand-up edge detection interrupts)
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g043u-irqc # RZ/G2UL
+ - renesas,r9a07g044-irqc # RZ/G2{L,LC}
+ - renesas,r9a07g054-irqc # RZ/V2L
+ - const: renesas,rzg2l-irqc
+
+ '#interrupt-cells':
+ description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
+ include/dt-bindings/interrupt-controller/irqc-rzg2l.h and the second
+ cell is used to specify the flag.
+ const: 2
+
+ '#address-cells':
+ const: 0
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 41
+ items:
+ - description: NMI interrupt
+ - description: IRQ0 interrupt
+ - description: IRQ1 interrupt
+ - description: IRQ2 interrupt
+ - description: IRQ3 interrupt
+ - description: IRQ4 interrupt
+ - description: IRQ5 interrupt
+ - description: IRQ6 interrupt
+ - description: IRQ7 interrupt
+ - description: GPIO interrupt, TINT0
+ - description: GPIO interrupt, TINT1
+ - description: GPIO interrupt, TINT2
+ - description: GPIO interrupt, TINT3
+ - description: GPIO interrupt, TINT4
+ - description: GPIO interrupt, TINT5
+ - description: GPIO interrupt, TINT6
+ - description: GPIO interrupt, TINT7
+ - description: GPIO interrupt, TINT8
+ - description: GPIO interrupt, TINT9
+ - description: GPIO interrupt, TINT10
+ - description: GPIO interrupt, TINT11
+ - description: GPIO interrupt, TINT12
+ - description: GPIO interrupt, TINT13
+ - description: GPIO interrupt, TINT14
+ - description: GPIO interrupt, TINT15
+ - description: GPIO interrupt, TINT16
+ - description: GPIO interrupt, TINT17
+ - description: GPIO interrupt, TINT18
+ - description: GPIO interrupt, TINT19
+ - description: GPIO interrupt, TINT20
+ - description: GPIO interrupt, TINT21
+ - description: GPIO interrupt, TINT22
+ - description: GPIO interrupt, TINT23
+ - description: GPIO interrupt, TINT24
+ - description: GPIO interrupt, TINT25
+ - description: GPIO interrupt, TINT26
+ - description: GPIO interrupt, TINT27
+ - description: GPIO interrupt, TINT28
+ - description: GPIO interrupt, TINT29
+ - description: GPIO interrupt, TINT30
+ - description: GPIO interrupt, TINT31
+ - description: Bus error interrupt
+
+ interrupt-names:
+ minItems: 41
+ items:
+ - const: nmi
+ - const: irq0
+ - const: irq1
+ - const: irq2
+ - const: irq3
+ - const: irq4
+ - const: irq5
+ - const: irq6
+ - const: irq7
+ - const: tint0
+ - const: tint1
+ - const: tint2
+ - const: tint3
+ - const: tint4
+ - const: tint5
+ - const: tint6
+ - const: tint7
+ - const: tint8
+ - const: tint9
+ - const: tint10
+ - const: tint11
+ - const: tint12
+ - const: tint13
+ - const: tint14
+ - const: tint15
+ - const: tint16
+ - const: tint17
+ - const: tint18
+ - const: tint19
+ - const: tint20
+ - const: tint21
+ - const: tint22
+ - const: tint23
+ - const: tint24
+ - const: tint25
+ - const: tint26
+ - const: tint27
+ - const: tint28
+ - const: tint29
+ - const: tint30
+ - const: tint31
+ - const: bus-err
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: clk
+ - const: pclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - '#address-cells'
+ - interrupt-controller
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a07g043u-irqc
+ then:
+ properties:
+ interrupts:
+ minItems: 42
+ interrupt-names:
+ minItems: 42
+ required:
+ - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ irqc: interrupt-controller@110a0000 {
+ compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+ reg = <0x110a0000 0x10000>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "nmi",
+ "irq0", "irq1", "irq2", "irq3",
+ "irq4", "irq5", "irq6", "irq7",
+ "tint0", "tint1", "tint2", "tint3",
+ "tint4", "tint5", "tint6", "tint7",
+ "tint8", "tint9", "tint10", "tint11",
+ "tint12", "tint13", "tint14", "tint15",
+ "tint16", "tint17", "tint18", "tint19",
+ "tint20", "tint21", "tint22", "tint23",
+ "tint24", "tint25", "tint26", "tint27",
+ "tint28", "tint29", "tint30", "tint31";
+ clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+ <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_IA55_RESETN>;
+ };
diff --git a/Bindings/interrupt-controller/riscv,cpu-intc.txt b/Bindings/interrupt-controller/riscv,cpu-intc.txt
new file mode 100644
index 0000000..265b223
--- /dev/null
+++ b/Bindings/interrupt-controller/riscv,cpu-intc.txt
@@ -0,0 +1,52 @@
+RISC-V Hart-Level Interrupt Controller (HLIC)
+---------------------------------------------
+
+RISC-V cores include Control Status Registers (CSRs) which are local to each
+CPU core (HART in RISC-V terminology) and can be read or written by software.
+Some of these CSRs are used to control local interrupts connected to the core.
+Every interrupt is ultimately routed through a hart's HLIC before it
+interrupts that hart.
+
+The RISC-V supervisor ISA manual specifies three interrupt sources that are
+attached to every HLIC: software interrupts, the timer interrupt, and external
+interrupts. Software interrupts are used to send IPIs between cores. The
+timer interrupt comes from an architecturally mandated real-time timer that is
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
+interrupts connect all other device interrupts to the HLIC, which are routed
+via the platform-level interrupt controller (PLIC).
+
+All RISC-V systems that conform to the supervisor ISA specification are
+required to have a HLIC with these three interrupt sources present. Since the
+interrupt map is defined by the ISA it's not listed in the HLIC's device tree
+entry, though external interrupt controllers (like the PLIC, for example) will
+need to define how their interrupts map to the relevant HLICs. This means
+a PLIC interrupt property will typically list the HLICs for all present HARTs
+in the system.
+
+Required properties:
+- compatible : "riscv,cpu-intc"
+- #interrupt-cells : should be <1>. The interrupt sources are defined by the
+ RISC-V supervisor ISA manual, with only the following three interrupts being
+ defined for supervisor mode:
+ - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+ call and is reserved for use by software.
+ - Source 5 is the supervisor timer interrupt, which can be configured by
+ SBI calls and implements a one-shot timer.
+ - Source 9 is the supervisor external interrupt, which chains to all other
+ device interrupts.
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Furthermore, this interrupt-controller MUST be embedded inside the cpu
+definition of the hart whose CSRs control these local interrupts.
+
+An example device tree entry for a HLIC is show below.
+
+ cpu1: cpu@1 {
+ compatible = "riscv";
+ ...
+ cpu1-intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
diff --git a/Bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
new file mode 100644
index 0000000..72456a0
--- /dev/null
+++ b/Bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Interrupt Combiner Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ Samsung's Exynos4 architecture includes a interrupt combiner controller which
+ can combine interrupt sources as a group and provide a single interrupt
+ request for the group. The interrupt request from each group are connected to
+ a parent interrupt controller, such as GIC in case of Exynos4210.
+
+ The interrupt combiner controller consists of multiple combiners. Up to eight
+ interrupt sources can be connected to a combiner. The combiner outputs one
+ combined interrupt for its eight interrupt sources. The combined interrupt is
+ usually connected to a parent interrupt controller.
+
+ A single node in the device tree is used to describe the interrupt combiner
+ controller module (which includes multiple combiners). A combiner in the
+ interrupt controller module shares config/control registers with other
+ combiners. For example, a 32-bit interrupt enable/disable config register can
+ accommodate up to 4 interrupt combiners (with each combiner supporting up to
+ 8 interrupt sources).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: samsung,exynos4210-combiner
+
+ interrupt-controller: true
+
+ interrupts:
+ minItems: 8
+ maxItems: 32
+
+ "#interrupt-cells":
+ description: |
+ The meaning of the cells are:
+ * First Cell: Combiner Group Number.
+ * Second Cell: Interrupt number within the group.
+ const: 2
+
+ reg:
+ maxItems: 1
+
+ samsung,combiner-nr:
+ description: |
+ The number of interrupt combiners supported. Should match number
+ of interrupts set in "interrupts" property.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 8
+ maximum: 32
+ default: 16
+
+required:
+ - compatible
+ - interrupt-controller
+ - interrupts
+ - "#interrupt-cells"
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 0000000..0c07e8d
--- /dev/null
+++ b/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+ SiFive SoCs and other RISC-V SoCs include an implementation of the
+ Platform-Level Interrupt Controller (PLIC) high-level specification in
+ the RISC-V Privileged Architecture specification. The PLIC connects all
+ external interrupts in the system to all hart contexts in the system, via
+ the external interrupt source in each hart.
+
+ A hart context is a privilege mode in a hardware execution thread. For example,
+ in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+ privilege modes per hart; machine mode and supervisor mode.
+
+ Each interrupt can be enabled on per-context basis. Any context can claim
+ a pending enabled interrupt and then release it once it has been handled.
+
+ Each interrupt has a configurable priority. Higher priority interrupts are
+ serviced first. Each context can specify a priority threshold. Interrupts
+ with priority below this threshold will not cause the PLIC to raise its
+ interrupt line leading to the context.
+
+ The PLIC supports both edge-triggered and level-triggered interrupts. For
+ edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+ seen while an interrupt handler is active; the PLIC may either queue them or
+ ignore them. In the first case, handlers are oblivious to the trigger type, so
+ it is not included in the interrupt specifier. In the second case, software
+ needs to know the trigger type, so it can reorder the interrupt flow to avoid
+ missing interrupts. This special handling is needed by at least the Renesas
+ RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
+
+ While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+ "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+ contains a specific memory layout, which is documented in chapter 8 of the
+ SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+ The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+ T-HEAD PLIC implementation requires setting a delegation bit to allow access
+ from S-mode. So add thead,c900-plic to distinguish them.
+
+maintainers:
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g043-plic
+ - const: andestech,nceplic100
+ - items:
+ - enum:
+ - canaan,k210-plic
+ - sifive,fu540-c000-plic
+ - starfive,jh7100-plic
+ - starfive,jh7110-plic
+ - const: sifive,plic-1.0.0
+ - items:
+ - enum:
+ - allwinner,sun20i-d1-plic
+ - sophgo,cv1800b-plic
+ - sophgo,sg2042-plic
+ - thead,th1520-plic
+ - const: thead,c900-plic
+ - items:
+ - const: sifive,plic-1.0.0
+ - const: riscv,plic0
+ deprecated: true
+ description: For the QEMU virt machine only
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells': true
+
+ interrupt-controller: true
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 15872
+ description:
+ Specifies which contexts are connected to the PLIC, with "-1" specifying
+ that a context is not present. Each node pointed to should be a
+ riscv,cpu-intc node, which has a riscv node as parent.
+
+ riscv,ndev:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Specifies how many external interrupts are supported by this controller.
+
+ clocks: true
+
+ power-domains: true
+
+ resets: true
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+ - reg
+ - interrupts-extended
+ - riscv,ndev
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - andestech,nceplic100
+ - thead,c900-plic
+
+ then:
+ properties:
+ '#interrupt-cells':
+ const: 2
+
+ else:
+ properties:
+ '#interrupt-cells':
+ const: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a07g043-plic
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ plic: interrupt-controller@c000000 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
+ reg = <0xc000000 0x4000000>;
+ riscv,ndev = <10>;
+ };
diff --git a/Bindings/interrupt-controller/snps,arc700-intc.txt b/Bindings/interrupt-controller/snps,arc700-intc.txt
new file mode 100644
index 0000000..9a5d562
--- /dev/null
+++ b/Bindings/interrupt-controller/snps,arc700-intc.txt
@@ -0,0 +1,24 @@
+* ARC700 incore Interrupt Controller
+
+ The core interrupt controller provides 32 prioritised interrupts (2 levels)
+ to ARC700 core.
+
+Properties:
+
+- compatible: "snps,arc700-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+ Single Cell "interrupts" property of a device specifies the IRQ number
+ between 0 to 31
+
+ intc accessed via the special ARC AUX register interface, hence "reg" property
+ is not specified.
+
+Example:
+
+ intc: interrupt-controller {
+ compatible = "snps,arc700-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/snps,archs-idu-intc.txt b/Bindings/interrupt-controller/snps,archs-idu-intc.txt
new file mode 100644
index 0000000..a5c1db9
--- /dev/null
+++ b/Bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -0,0 +1,46 @@
+* ARC-HS Interrupt Distribution Unit
+
+ This optional 2nd level interrupt controller can be used in SMP configurations
+ for dynamic IRQ routing, load balancing of common/external IRQs towards core
+ intc.
+
+Properties:
+
+- compatible: "snps,archs-idu-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1> or <2>.
+
+ Value of the first cell specifies the "common" IRQ from peripheral to IDU.
+ Number N of the particular interrupt line of IDU corresponds to the line N+24
+ of the core interrupt controller.
+
+ The (optional) second cell specifies any of the following flags:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 2 = NOT SUPPORTED (high-to-low edge triggered)
+ 4 = active high level-sensitive <<< DEFAULT
+ 8 = NOT SUPPORTED (active low level-sensitive)
+ When no second cell is specified, the interrupt is assumed to be level
+ sensitive.
+
+ The interrupt controller is accessed via the special ARC AUX register
+ interface, hence "reg" property is not specified.
+
+Example:
+ core_intc: core-interrupt-controller {
+ compatible = "snps,archs-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ idu_intc: idu-interrupt-controller {
+ compatible = "snps,archs-idu-intc";
+ interrupt-controller;
+ interrupt-parent = <&core_intc>;
+ #interrupt-cells = <1>;
+ };
+
+ some_device: serial@c0fc1000 {
+ interrupt-parent = <&idu_intc>;
+ interrupts = <0>; /* upstream idu IRQ #24 */
+ };
diff --git a/Bindings/interrupt-controller/snps,archs-intc.txt b/Bindings/interrupt-controller/snps,archs-intc.txt
new file mode 100644
index 0000000..69f326d
--- /dev/null
+++ b/Bindings/interrupt-controller/snps,archs-intc.txt
@@ -0,0 +1,22 @@
+* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)
+
+Properties:
+
+- compatible: "snps,archs-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+ Single Cell "interrupts" property of a device specifies the IRQ number
+ between 16 to 256
+
+ intc accessed via the special ARC AUX register interface, hence "reg" property
+ is not specified.
+
+Example:
+
+ intc: interrupt-controller {
+ compatible = "snps,archs-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <16 17 18 19 20 21 22 23 24 25>;
+ };
diff --git a/Bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Bindings/interrupt-controller/snps,dw-apb-ictl.txt
new file mode 100644
index 0000000..2db59df
--- /dev/null
+++ b/Bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -0,0 +1,43 @@
+Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+Synopsys DesignWare provides interrupt controller IP for APB known as
+dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
+
+Required properties:
+- compatible: shall be "snps,dw-apb-ictl"
+- reg: physical base address of the controller and length of memory mapped
+ region starting with ENABLE_LOW register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
+- interrupts: interrupt reference to primary interrupt controller
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of low interrupts,
+- 1 maps to bit 1 of low interrupts,
+- 32 maps to bit 0 of high interrupts,
+- 33 maps to bit 1 of high interrupts,
+- (optional) fast interrupts start at 64.
+
+Example:
+ /* dw_apb_ictl is used as secondary interrupt controller */
+ aic: interrupt-controller@3000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3000 0xc00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* dw_apb_ictl is used as primary interrupt controller */
+ vic: interrupt-controller@10130000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x10130000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Bindings/interrupt-controller/socionext,synquacer-exiu.yaml b/Bindings/interrupt-controller/socionext,synquacer-exiu.yaml
new file mode 100644
index 0000000..92cec22
--- /dev/null
+++ b/Bindings/interrupt-controller/socionext,synquacer-exiu.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,synquacer-exiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer External Interrupt Unit (EXIU)
+
+maintainers:
+ - Ard Biesheuvel <ardb@kernel.org>
+
+description: |+
+ The Socionext SynQuacer SoC has an external interrupt unit (EXIU)
+ that forwards a block of 32 configurable input lines to 32 adjacent
+ level-high type GICv3 SPIs.
+
+properties:
+ compatible:
+ const: socionext,synquacer-exiu
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 3
+
+ interrupt-controller: true
+
+ socionext,spi-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The SPI number of the first SPI of the 32 adjacent ones the
+ EXIU forwards its interrupts to.
+
+required:
+ - compatible
+ - reg
+ - '#interrupt-cells'
+ - interrupt-controller
+ - socionext,spi-base
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ interrupt-controller@510c0000 {
+ compatible = "socionext,synquacer-exiu";
+ reg = <0x510c0000 0x20>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
+ socionext,spi-base = <112>;
+ };
+...
diff --git a/Bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Bindings/interrupt-controller/socionext,uniphier-aidet.yaml
new file mode 100644
index 0000000..de7c5e5
--- /dev/null
+++ b/Bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIDET
+
+description: |
+ UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC
+ (Generic Interrupt Controller). GIC itself can handle only high level and
+ rising edge interrupts. The AIDET provides logic inverter to support low
+ level and falling edge interrupts.
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-ld4-aidet
+ - socionext,uniphier-pro4-aidet
+ - socionext,uniphier-sld8-aidet
+ - socionext,uniphier-pro5-aidet
+ - socionext,uniphier-pxs2-aidet
+ - socionext,uniphier-ld6b-aidet
+ - socionext,uniphier-ld11-aidet
+ - socionext,uniphier-ld20-aidet
+ - socionext,uniphier-pxs3-aidet
+ - socionext,uniphier-nx1-aidet
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: |
+ The first cell defines the interrupt number (corresponds to the SPI
+ interrupt number of GIC). The second cell specifies the trigger type as
+ defined in interrupts.txt in this directory.
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@5fc20000 {
+ compatible = "socionext,uniphier-pro4-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Bindings/interrupt-controller/st,spear3xx-shirq.txt b/Bindings/interrupt-controller/st,spear3xx-shirq.txt
new file mode 100644
index 0000000..a407c49
--- /dev/null
+++ b/Bindings/interrupt-controller/st,spear3xx-shirq.txt
@@ -0,0 +1,44 @@
+* SPEAr Shared IRQ layer (shirq)
+
+SPEAr3xx architecture includes shared/multiplexed irqs for certain set
+of devices. The multiplexor provides a single interrupt to parent
+interrupt controller (VIC) on behalf of a group of devices.
+
+There can be multiple groups available on SPEAr3xx variants but not
+exceeding 4. The number of devices in a group can differ, further they
+may share same set of status/mask registers spanning across different
+bit masks. Also in some cases the group may not have enable or other
+registers. This makes software little complex.
+
+A single node in the device tree is used to describe the shared
+interrupt multiplexor (one node for all groups). A group in the
+interrupt controller shares config/control registers with other groups.
+For example, a 32-bit interrupt enable/disable config register can
+accommodate up to 4 interrupt groups.
+
+Required properties:
+ - compatible: should be, either of
+ - "st,spear300-shirq"
+ - "st,spear310-shirq"
+ - "st,spear320-shirq"
+ - interrupt-controller: Identifies the node as an interrupt controller.
+ - #interrupt-cells: should be <1> which basically contains the offset
+ (starting from 0) of interrupts for all the groups.
+ - reg: Base address and size of shirq registers.
+ - interrupts: The list of interrupts generated by the groups which are
+ then connected to a parent interrupt controller. Each group is
+ associated with one of the interrupts, hence number of interrupts (to
+ parent) is equal to number of groups. The format of the interrupt
+ specifier depends in the interrupt parent controller.
+
+Example:
+
+The following is an example from the SPEAr320 SoC dtsi file.
+
+shirq: interrupt-controller@b3000000 {
+ compatible = "st,spear320-shirq";
+ reg = <0xb3000000 0x1000>;
+ interrupts = <28 29 30 1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+};
diff --git a/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
new file mode 100644
index 0000000..2b153d7
--- /dev/null
+++ b/Bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi System Configuration Controlled IRQs
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description:
+ On STi based systems; External, CTI (Core Sight), PMU (Performance
+ Management), and PL310 L2 Cache IRQs are controlled using System
+ Configuration registers. This device is used to unmask them prior to use.
+
+properties:
+ compatible:
+ const: st,stih407-irq-syscfg
+
+ st,syscfg:
+ description: Phandle to Cortex-A9 IRQ system config registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ st,irq-device:
+ description: Array of IRQs to enable.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: Enable the IRQ of the channel one.
+ - description: Enable the IRQ of the channel two.
+
+ st,fiq-device:
+ description: Array of FIQs to enable.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: Enable the IRQ of the channel one.
+ - description: Enable the IRQ of the channel two.
+
+ st,invert-ext:
+ description: External IRQs can be inverted at will. This property inverts
+ these three IRQs using bitwise logic, each one being encoded respectively
+ on the first, second and fourth bit.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 3, 4, 5, 6 ]
+
+required:
+ - compatible
+ - st,syscfg
+ - st,irq-device
+ - st,fiq-device
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq-st.h>
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+...
diff --git a/Bindings/interrupt-controller/st,stm32-exti.yaml b/Bindings/interrupt-controller/st,stm32-exti.yaml
new file mode 100644
index 0000000..00c10a8
--- /dev/null
+++ b/Bindings/interrupt-controller/st,stm32-exti.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 External Interrupt Controller
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@foss.st.com>
+ - Ludovic Barre <ludovic.barre@foss.st.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - st,stm32-exti
+ - st,stm32h7-exti
+ - items:
+ - enum:
+ - st,stm32mp1-exti
+ - st,stm32mp13-exti
+ - const: syscon
+
+ "#interrupt-cells":
+ const: 2
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ hwlocks:
+ maxItems: 1
+ description:
+ Reference to a phandle of a hardware spinlock provider node.
+
+ interrupts:
+ minItems: 1
+ maxItems: 96
+ description:
+ Interrupts references to primary interrupt controller
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupt-controller
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-exti
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 32
+ required:
+ - interrupts
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32h7-exti
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 96
+ required:
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ //Example 1
+ exti1: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ //Example 2
+ exti2: interrupt-controller@40013c00 {
+ compatible = "st,stm32-exti";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x40013C00 0x400>;
+ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+ };
+
+...
diff --git a/Bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 0000000..bd0021d
--- /dev/null
+++ b/Bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+ - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+ compatible:
+ items:
+ - const: sunplus,sp7021-intc
+
+ reg:
+ maxItems: 2
+ description:
+ Specifies base physical address(s) and size of the controller regs.
+ The 1st region include type/polarity/priority/mask regs.
+ The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the trigger
+ type as defined in interrupt.txt in this directory.
+
+ interrupts:
+ maxItems: 2
+ description:
+ EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+ controller.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ intc: interrupt-controller@9c000780 {
+ compatible = "sunplus,sp7021-intc";
+ reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+ };
+
+...
diff --git a/Bindings/interrupt-controller/technologic,ts4800.txt b/Bindings/interrupt-controller/technologic,ts4800.txt
new file mode 100644
index 0000000..341ae59
--- /dev/null
+++ b/Bindings/interrupt-controller/technologic,ts4800.txt
@@ -0,0 +1,14 @@
+TS-4800 FPGA interrupt controller
+
+TS-4800 FPGA has an internal interrupt controller. When one of the
+interrupts is triggered, the SoC is notified, usually using a GPIO as
+parent interrupt source.
+
+Required properties:
+- compatible: should be "technologic,ts4800-irqc"
+- interrupt-controller: identifies the node as an interrupt controller
+- reg: physical base address of the controller and length of memory mapped
+ region
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/Bindings/interrupt-controller/thead,c900-aclint-mswi.yaml b/Bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
new file mode 100644
index 0000000..065f254
--- /dev/null
+++ b/Bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-mswi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo sg2042 CLINT Machine-level Software Interrupt Device
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sophgo,sg2042-aclint-mswi
+ - const: thead,c900-aclint-mswi
+
+ reg:
+ maxItems: 1
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 4095
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+
+examples:
+ - |
+ interrupt-controller@94000000 {
+ compatible = "sophgo,sg2042-aclint-mswi", "thead,c900-aclint-mswi";
+ interrupts-extended = <&cpu1intc 3>,
+ <&cpu2intc 3>,
+ <&cpu3intc 3>,
+ <&cpu4intc 3>;
+ reg = <0x94000000 0x00010000>;
+ };
+...
diff --git a/Bindings/interrupt-controller/ti,cp-intc.txt b/Bindings/interrupt-controller/ti,cp-intc.txt
new file mode 100644
index 0000000..597e8a0
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,cp-intc.txt
@@ -0,0 +1,27 @@
+* TI Common Platform Interrupt Controller
+
+Common Platform Interrupt Controller (cp_intc) is used on
+OMAP-L1x SoCs and can support several configurable number
+of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+ "ti,cp-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 1.
+
+ The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,cp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <101>;
+ reg = <0xfffee000 0x2000>;
+ };
diff --git a/Bindings/interrupt-controller/ti,keystone-irq.txt b/Bindings/interrupt-controller/ti,keystone-irq.txt
new file mode 100644
index 0000000..5f94d77
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,keystone-irq.txt
@@ -0,0 +1,36 @@
+Keystone 2 IRQ controller IP
+
+On Keystone SOCs, DSP cores can send interrupts to ARM
+host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
+The IRQ handler running on HOST OS can identify DSP signal source by
+analyzing SRCCx bits in IPCARx registers. This is one of the component
+used by the IPC mechanism used on Keystone SOCs.
+
+Required Properties:
+- compatible: should be "ti,keystone-irq"
+- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
+ access device control registers and the offset inside
+ device control registers range.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source should be 1.
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+ kirq0: keystone_irq0@26202a0 {
+ compatible = "ti,keystone-irq";
+ ti,syscon-dev = <&devctrl 0x2a0>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ dsp0: dsp0 {
+ compatible = "linux,rproc-user";
+ ...
+ interrupt-parent = <&kirq0>;
+ interrupts = <10 2>;
+ };
diff --git a/Bindings/interrupt-controller/ti,omap-intc-irq.txt b/Bindings/interrupt-controller/ti,omap-intc-irq.txt
new file mode 100644
index 0000000..38ce5d0
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,omap-intc-irq.txt
@@ -0,0 +1,28 @@
+Omap2/3 intc controller
+
+On TI omap2 and 3 the intc interrupt controller can provide
+96 or 128 IRQ signals to the ARM host depending on the SoC.
+
+Required Properties:
+- compatible: should be one of
+ "ti,omap2-intc"
+ "ti,omap3-intc"
+ "ti,dm814-intc"
+ "ti,dm816-intc"
+ "ti,am33xx-intc"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1 for intc
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
diff --git a/Bindings/interrupt-controller/ti,omap2-intc.txt b/Bindings/interrupt-controller/ti,omap2-intc.txt
new file mode 100644
index 0000000..f2583e6
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,omap2-intc.txt
@@ -0,0 +1,27 @@
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+ "ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 1.
+
+ The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x48200000 0x1000>;
+ };
+
diff --git a/Bindings/interrupt-controller/ti,omap4-wugen-mpu b/Bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 0000000..422d690
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,31 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Required properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+ "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+ are explicitly forbidden.
+
+Example:
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
diff --git a/Bindings/interrupt-controller/ti,pruss-intc.yaml b/Bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 0000000..3cd5a18
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |
+ Each PRU-ICSS has a single interrupt controller instance that is common
+ to all the PRU cores. Most interrupt controllers can route 64 input events
+ which are then mapped to 10 possible output interrupts through two levels
+ of mapping. The input events can be triggered by either the PRUs and/or
+ various other PRUSS internal and external peripherals. The first 2 output
+ interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+ remaining 8 (2 through 9) connected to external interrupt controllers
+ including the MPU and/or other PRUSS instances, DSPs or devices.
+
+ The property "ti,irqs-reserved" is used for denoting the connection
+ differences on the output interrupts 2 through 9. If this property is not
+ defined, it implies that all the PRUSS INTC output interrupts 2 through 9
+ (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt
+ controller.
+
+ The K3 family of SoCs can handle 160 input events that can be mapped to 20
+ different possible output interrupts. The additional output interrupts (10
+ through 19) are connected to new sub-modules within the ICSSG instances.
+
+ This interrupt-controller node should be defined as a child node of the
+ corresponding PRUSS node. The node should be named "interrupt-controller".
+
+properties:
+ $nodename:
+ pattern: "^interrupt-controller@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - ti,pruss-intc
+ - ti,icssg-intc
+ description: |
+ Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+ AM335x family of SoCs,
+ AM437x family of SoCs,
+ AM57xx family of SoCs
+ 66AK2G family of SoCs
+ Use "ti,icssg-intc" for K3 AM65x, J721E and AM64x family of SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ All the interrupts generated towards the main host processor in the SoC.
+ A shared interrupt can be skipped if the desired destination and usage is
+ by a different processor/device.
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ pattern: host_intr[0-7]
+ description: |
+ Should use one of the above names for each valid host event interrupt
+ connected to Arm interrupt controller, the name should match the
+ corresponding host event interrupt number.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ Client users shall use the PRU System event number (the interrupt source
+ that the client is interested in) [cell 1], PRU channel [cell 2] and PRU
+ host_event (target) [cell 3] as the value of the interrupts property in
+ their node. The system events can be mapped to some output host
+ interrupts through 2 levels of many-to-one mapping i.e. events to channel
+ mapping and channels to host interrupts so through this property entire
+ mapping is provided.
+
+ ti,irqs-reserved:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
+ output interrupts 2 through 9) that are not connected to the Arm interrupt
+ controller or are shared and used by other devices or processors in the
+ SoC. Define this property when any of 8 interrupts should not be handled
+ by Arm interrupt controller.
+ Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt
+ connected to MPU
+ - AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+ "host_intr7" interrupts connected to MPU, and other ICSSG
+ instances.
+ - AM64x SoCs have all the 8 host interrupts connected to various
+ other SoC entities
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ /* AM33xx PRU-ICSS */
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupts = <20 21 22 23 24 25 26 27>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+
+ - |
+
+ /* AM4376 PRU-ICSS */
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pruss@0 {
+ compatible = "ti,am4376-pruss1";
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+ };
diff --git a/Bindings/interrupt-controller/ti,sci-inta.yaml b/Bindings/interrupt-controller/ti,sci-inta.yaml
new file mode 100644
index 0000000..6a49d74
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,sci-inta.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Aggregator
+
+maintainers:
+ - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+ The Interrupt Aggregator (INTA) provides a centralized machine
+ which handles the termination of system events to that they can
+ be coherently processed by the host(s) in the system. A maximum
+ of 64 events can be mapped to a single interrupt.
+
+ Interrupt Aggregator
+ +-----------------------------------------+
+ | Intmap VINT |
+ | +--------------+ +------------+ |
+ m ------>| | vint | bit | | 0 |.....|63| vint0 |
+ . | +--------------+ +------------+ | +------+
+ . | . . | | HOST |
+ Globalevents ------>| . . |----->| IRQ |
+ . | . . | | CTRL |
+ . | . . | +------+
+ n ------>| +--------------+ +------------+ |
+ | | vint | bit | | 0 |.....|63| vintx |
+ | +--------------+ +------------+ |
+ | |
+ | Unmap |
+ | +--------------+ |
+ Unmapped events ---->| | umapidx |-------------------------> Globalevents
+ | +--------------+ |
+ | |
+ +-----------------------------------------+
+
+ Configuration of these Intmap registers that maps global events to vint is
+ done by a system controller (like the Device Memory and Security Controller
+ on AM654 SoC). Driver should request the system controller to get the range
+ of global events and vints assigned to the requesting host. Management
+ of these requested resources should be handled by driver and requests
+ system controller to map specific global event to vint, bit pair.
+
+ Communication between the host processor running an OS and the system
+ controller happens through a protocol called TI System Control Interface
+ (TISCI protocol).
+
+properties:
+ compatible:
+ const: ti,sci-inta
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 0
+
+ msi-controller: true
+
+ ti,interrupt-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Interrupt ranges that converts the INTA output hw irq numbers
+ to parents's input interrupt numbers.
+ items:
+ items:
+ - description: |
+ "output_irq" specifies the base for inta output irq
+ - description: |
+ "parent's input irq" specifies the base for parent irq
+ - description: |
+ "limit" specifies the limit for translation
+
+ ti,unmapped-event-sources:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Array of phandles to DMA controllers where the unmapped events originate.
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - msi-controller
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ main_udmass_inta: msi-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ msi-controller;
+ interrupt-parent = <&main_navss_intr>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <179>;
+ ti,interrupt-ranges = <0 0 256>;
+ };
+ };
diff --git a/Bindings/interrupt-controller/ti,sci-intr.yaml b/Bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 0000000..c99cc73
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+ - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+ The Interrupt Router (INTR) module provides a mechanism to mux M
+ interrupt inputs to N interrupt outputs, where all M inputs are selectable
+ to be driven per N output. An Interrupt Router can either handle edge
+ triggered or level triggered interrupts and that is fixed in hardware.
+
+ Interrupt Router
+ +----------------------+
+ | Inputs Outputs |
+ +-------+ | +------+ +-----+ |
+ | GPIO |----------->| | irq0 | | 0 | | Host IRQ
+ +-------+ | +------+ +-----+ | controller
+ | . . | +-------+
+ +-------+ | . . |----->| IRQ |
+ | INTA |----------->| . . | +-------+
+ +-------+ | . +-----+ |
+ | +------+ | N | |
+ | | irqM | +-----+ |
+ | +------+ |
+ | |
+ +----------------------+
+
+ There is one register per output (MUXCNTL_N) that controls the selection.
+ Configuration of these MUXCNTL_N registers is done by a system controller
+ (like the Device Memory and Security Controller on K3 AM654 SoC). System
+ controller will keep track of the used and unused registers within the Router.
+ Driver should request the system controller to get the range of GIC IRQs
+ assigned to the requesting hosts. It is the drivers responsibility to keep
+ track of Host IRQs.
+
+ Communication between the host processor running an OS and the system
+ controller happens through a protocol called TI System Control Interface
+ (TISCI protocol).
+
+properties:
+ compatible:
+ const: ti,sci-intr
+
+ ti,intr-trigger-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4]
+ description: |
+ Should be one of the following.
+ 1 = If intr supports edge triggered interrupts.
+ 4 = If intr supports level triggered interrupts.
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+ description: |
+ The 1st cell should contain interrupt router input hw number.
+
+ ti,interrupt-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Interrupt ranges that converts the INTR output hw irq numbers
+ to parents's input interrupt numbers.
+ items:
+ items:
+ - description: |
+ "output_irq" specifies the base for intr output irq
+ - description: |
+ "parent's input irq" specifies the base for parent irq
+ - description: |
+ "limit" specifies the limit for translation
+
+required:
+ - compatible
+ - ti,intr-trigger-type
+ - interrupt-controller
+ - '#interrupt-cells'
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ main_gpio_intr: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <131>;
+ ti,interrupt-ranges = <0 360 32>;
+ };
diff --git a/Bindings/interrupt-controller/via,vt8500-intc.txt b/Bindings/interrupt-controller/via,vt8500-intc.txt
new file mode 100644
index 0000000..0a4ce10
--- /dev/null
+++ b/Bindings/interrupt-controller/via,vt8500-intc.txt
@@ -0,0 +1,16 @@
+VIA/Wondermedia VT8500 Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-intc"
+- reg : Should contain 1 register ranges(address and length)
+- #interrupt-cells : should be <1>
+
+Example:
+
+ intc: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };