diff --git a/Bindings/input/gpio-keys.yaml b/Bindings/input/gpio-keys.yaml
new file mode 100644
index 0000000..159cd9d
--- /dev/null
+++ b/Bindings/input/gpio-keys.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached keys
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - gpio-keys
+      - gpio-keys-polled
+
+  autorepeat: true
+
+  label:
+    description: Name of entire device
+
+  poll-interval: true
+
+patternProperties:
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      label:
+        description: Descriptive name of the key.
+
+      linux,code:
+        description: Key / Axis code to emit.
+
+      linux,input-type:
+        default: 1  # EV_KEY
+
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
+
+          linux,input-value = <0xffffffff>; /* -1 */
+
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+        default: 5
+
+      wakeup-source:
+        description: Button can wake-up the system.
+
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
+
+          Supported values are defined in linux-event-codes.h:
+
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
+
+    required:
+      - linux,code
+
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
+
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
+      required:
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio-keys {
+        compatible = "gpio-keys";
+        autorepeat;
+
+        key-up {
+            label = "GPIO Key UP";
+            linux,code = <103>;
+            gpios = <&gpio1 0 1>;
+        };
+
+        key-down {
+            label = "GPIO Key DOWN";
+            linux,code = <108>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+...