diff --git a/Bindings/iio/dac/adi,ad3552r.yaml b/Bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 0000000..96340a0
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ad3552r@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <0 10000000>;
+            };
+            channel@1 {
+                reg = <1>;
+                custom-output-range-config {
+                    adi,gain-offset = <5>;
+                    adi,gain-scaling-p-inv-log2 = <1>;
+                    adi,gain-scaling-n-inv-log2 = <2>;
+                    adi,rfb-ohms = <1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5064.yaml b/Bindings/iio/dac/adi,ad5064.yaml
new file mode 100644
index 0000000..c04165f
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5064.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5064 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   A range of similar DAC devices with between 1 and 12 channels. Some parts
+   have internal references, others require a single shared external reference
+   and the remainder have a separate reference pin for each DAC.
+
+properties:
+  compatible:
+    oneOf:
+      - description: I2C devics
+        enum:
+          - adi,ad5024
+          - adi,ad5025
+          - adi,ad5044
+          - adi,ad5045
+          - adi,ad5064
+          - adi,ad5064-1
+          - adi,ad5065
+          - adi,ad5628-1
+          - adi,ad5628-2
+          - adi,ad5648-1
+          - adi,ad5648-2
+          - adi,ad5666-1
+          - adi,ad5666-2
+          - adi,ad5668-1
+          - adi,ad5668-2
+          - adi,ad5668-3
+      - description: SPI devices
+        enum:
+          - adi,ad5625
+          - adi,ad5625r-1v25
+          - adi,ad5625r-2v5
+          - adi,ad5627
+          - adi,ad5627r-1v25
+          - adi,ad5627r-2v5
+          - adi,ad5629-1
+          - adi,ad5629-2
+          - adi,ad5629-3
+          - adi,ad5645r-1v25
+          - adi,ad5645r-2v5
+          - adi,ad5665
+          - adi,ad5665r-1v25
+          - adi,ad5665r-2v5
+          - adi,ad5667
+          - adi,ad5667r-1v25
+          - adi,ad5667r-2v5
+          - adi,ad5669-1
+          - adi,ad5669-2
+          - adi,ad5669-3
+          - lltc,ltc2606
+          - lltc,ltc2607
+          - lltc,ltc2609
+          - lltc,ltc2616
+          - lltc,ltc2617
+          - lltc,ltc2619
+          - lltc,ltc2626
+          - lltc,ltc2627
+          - lltc,ltc2629
+          - lltc,ltc2631-l12
+          - lltc,ltc2631-h12
+          - lltc,ltc2631-l10
+          - lltc,ltc2631-h10
+          - lltc,ltc2631-l8
+          - lltc,ltc2631-h8
+          - lltc,ltc2633-l12
+          - lltc,ltc2633-h12
+          - lltc,ltc2633-l10
+          - lltc,ltc2633-h10
+          - lltc,ltc2633-l8
+          - lltc,ltc2633-h8
+          - lltc,ltc2635-l12
+          - lltc,ltc2635-h12
+          - lltc,ltc2635-l10
+          - lltc,ltc2635-h10
+          - lltc,ltc2635-l8
+          - lltc,ltc2635-h8
+
+  reg:
+    maxItems: 1
+
+  vrefA-supply: true
+  vrefB-supply: true
+  vrefC-supply: true
+  vrefD-supply: true
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # Shared external vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5064-1
+              - adi,ad5625
+              - adi,ad5627
+              - adi,ad5665
+              - adi,ad5667
+              - lltc,ltc2606
+              - lltc,ltc2607
+              - lltc,ltc2616
+              - lltc,ltc2617
+              - lltc,ltc2626
+              - lltc,ltc2627
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+      required:
+        - vref-supply
+  - # Shared external vref, internal reference available
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5625r-1v25
+              - adi,ad5625r-2v5
+              - adi,ad5627r-1v25
+              - adi,ad5627r-2v5
+              - adi,ad5628-1
+              - adi,ad5628-2
+              - adi,ad5629-1
+              - adi,ad5629-2
+              - adi,ad5629-3
+              - adi,ad5645r-1v25
+              - adi,ad5645r-2v5
+              - adi,ad5647r-1v25
+              - adi,ad5647r-2v5
+              - adi,ad5648-1
+              - adi,ad5648-2
+              - adi,ad5665r-1v25
+              - adi,ad5665r-2v5
+              - adi,ad5666-1
+              - adi,ad5666-2
+              - adi,ad5667r-1v25
+              - adi,ad5667r-2v5
+              - adi,ad5668-1
+              - adi,ad5668-2
+              - adi,ad5668-3
+              - adi,ad5669-1
+              - adi,ad5669-2
+              - adi,ad5669-3
+              - lltc,ltc2631-l12
+              - lltc,ltc2631-h12
+              - lltc,ltc2631-l10
+              - lltc,ltc2631-h10
+              - lltc,ltc2631-l8
+              - lltc,ltc2631-h8
+              - lltc,ltc2633-l12
+              - lltc,ltc2633-h12
+              - lltc,ltc2633-l10
+              - lltc,ltc2633-h10
+              - lltc,ltc2633-l8
+              - lltc,ltc2633-h8
+              - lltc,ltc2635-l12
+              - lltc,ltc2635-h12
+              - lltc,ltc2635-l10
+              - lltc,ltc2635-h10
+              - lltc,ltc2635-l8
+              - lltc,ltc2635-h8
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+  - # 4 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5024
+              - adi,ad5044
+              - adi,ad5064
+              - lltc,ltc2609
+              - lltc,ltc2619
+              - lltc,ltc2629
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: true
+        vrefD-supply: true
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+        - vrefC-supply
+        - vrefD-supply
+  - # 2 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5025
+              - adi,ad5045
+              - adi,ad5065
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: false
+        vrefD-supply: false
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625";
+            vref-supply = <&dac_vref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625r-1v25";
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@42 {
+            reg = <0x42>;
+            compatible = "adi,ad5024";
+            vrefA-supply = <&dac_vref>;
+            vrefB-supply = <&dac_vref>;
+            vrefC-supply = <&dac_vref2>;
+            vrefD-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5360.yaml b/Bindings/iio/dac/adi,ad5360.yaml
new file mode 100644
index 0000000..86e2884
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5360.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5360
+      - adi,ad5361
+      - adi,ad5363
+      - adi,ad5370
+      - adi,ad5371
+      - adi,ad5372
+      - adi,ad5373
+
+  reg:
+    maxItems: 1
+
+  vref0-supply: true
+  vref1-supply: true
+  vref2-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref0-supply
+  - vref1-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5360
+              - adi,ad5361
+              - adi,ad5363
+              - adi,ad5370
+              - adi,ad5372
+              - adi,ad5373
+    then:
+      properties:
+        vref2-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5371
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5371";
+            vref0-supply = <&dac_vref0>;
+            vref1-supply = <&dac_vref1>;
+            vref2-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5380.yaml b/Bindings/iio/dac/adi,ad5380.yaml
new file mode 100644
index 0000000..9eb9928
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5380.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5380 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  DAC devices supporting both SPI and I2C interfaces.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5380-3
+      - adi,ad5380-5
+      - adi,ad5381-3
+      - adi,ad5381-5
+      - adi,ad5382-3
+      - adi,ad5382-5
+      - adi,ad5383-3
+      - adi,ad5383-5
+      - adi,ad5384-3
+      - adi,ad5384-5
+      - adi,ad5390-3
+      - adi,ad5390-5
+      - adi,ad5391-3
+      - adi,ad5391-5
+      - adi,ad5392-3
+      - adi,ad5392-5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      If not supplied devices will use internal regulators.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+           reg = <0>;
+           compatible = "adi,ad5390-5";
+           vref-supply = <&dacvref>;
+        };
+    };
+  - |
+    i2c {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       dac@42 {
+          reg = <0x42>;
+          compatible = "adi,ad5380-3";
+       };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5421.yaml b/Bindings/iio/dac/adi,ad5421.yaml
new file mode 100644
index 0000000..52d089e
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5421.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5421 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  AD5421 is designed for us in loop-powered, 4 mA to 20 mA smart transmitter
+  applications. It provides a 16-bit DAC, current amplifier, voltage regulator
+  to drive the loop and a voltage reference.
+
+properties:
+  compatible:
+    const: adi,ad5421
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Fault signal.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5421";
+            reg = <0>;
+            spi-max-frequency = <30000000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5449.yaml b/Bindings/iio/dac/adi,ad5449.yaml
new file mode 100644
index 0000000..d2af2d4
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5449.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5449.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5449 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Family of multiplying DACs from Analog Devices
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5415
+      - adi,ad5426
+      - adi,ad5429
+      - adi,ad5432
+      - adi,ad5439
+      - adi,ad5443
+      - adi,ad5449
+
+  reg:
+    maxItems: 1
+
+  VREF-supply: true
+  VREFA-supply: true
+  VREFB-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5415
+              - adi,ad5426
+              - adi,ad5432
+    then:
+      properties:
+        VREF-supply: true
+        VREFA-supply: false
+        VREFB-supply: false
+      required:
+        - VREF-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5429
+              - adi,ad5439
+              - adi,ad5449
+    then:
+      properties:
+        VREF-supply: false
+        VREFA-supply: true
+        VREFB-supply: true
+      required:
+        - VREFA-supply
+        - VREFB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5415";
+            VREF-supply = <&dac_ref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5429";
+            VREFA-supply = <&dac_refA>;
+            VREFB-supply = <&dac_refB>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5504.yaml b/Bindings/iio/dac/adi,ad5504.yaml
new file mode 100644
index 0000000..9c2c038
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5504.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5501 and AD5504 DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  High voltage (up to 60V) DACs with temperature sensor alarm function
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5501
+      - adi,ad5504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Used for temperature alarm.
+    maxItems: 1
+
+  vcc-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5504";
+            vcc-supply = <&dac_vcc>;
+            interrupts = <55 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5592r.yaml b/Bindings/iio/dac/adi,ad5592r.yaml
new file mode 100644
index 0000000..3019488
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5592r.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5592r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5592R/AD5593R DAC/ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5592r
+      - adi,ad5593r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  spi-cpol: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description: If not set internal 2.5V reference used.
+
+  reset-gpios:
+    maxItems: 1
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad5592r
+    then:
+      required:
+        - spi-cpol
+    else:
+      properties:
+        spi-cpol: false
+
+additionalProperties: false
+
+patternProperties:
+  "^(channel@)[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 8]
+        description: |
+          Mode or function of this channel.
+          Macros specifying the valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+
+          The following values are currently supported:
+          * CH_MODE_UNUSED (the pin is unused)
+          * CH_MODE_ADC (the pin is ADC input)
+          * CH_MODE_DAC (the pin is DAC output)
+          * CH_MODE_DAC_AND_ADC (the pin is DAC output but can be monitored
+            by an ADC, since there is no disadvantage this should be
+            considered as the preferred DAC mode)
+          * CH_MODE_GPIO (the pin is registered with GPIOLIB)
+
+      adi,off-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          State of this channel when unused or the device gets removed.
+          Macros specifying the  valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+          * CH_OFFSTATE_PULLDOWN (the pin is pulled down)
+          * CH_OFFSTATE_OUT_LOW  (the pin is output low)
+          * CH_OFFSTATE_OUT_HIGH (the pin is output high)
+          * CH_OFFSTATE_OUT_TRISTATE (the pin is tristated output)
+
+    required:
+      - reg
+      - adi,mode
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adi,ad5592r.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        addac@0 {
+            compatible = "adi,ad5592r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            vref-supply = <&vref>;
+            reset-gpios = <&gpio0 86 0>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@4 {
+                reg = <4>;
+                adi,mode = <CH_MODE_UNUSED>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@5 {
+                reg = <5>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@7 {
+                reg = <7>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+        ad5593r@10 {
+            compatible = "adi,ad5593r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0x10>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5624r.yaml b/Bindings/iio/dac/adi,ad5624r.yaml
new file mode 100644
index 0000000..4d5111a
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5624r.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5624r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5624r and similar DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5624r3
+      - adi,ad5644r3
+      - adi,ad5664r3
+      - adi,ad5624r5
+      - adi,ad5644r5
+      - adi,ad5664r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not present, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5624r3";
+            vref-supply = <&vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5686.yaml b/Bindings/iio/dac/adi,ad5686.yaml
new file mode 100644
index 0000000..b4400c5
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5686.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: SPI devices
+        enum:
+          - adi,ad5310r
+          - adi,ad5672r
+          - adi,ad5674r
+          - adi,ad5676
+          - adi,ad5676r
+          - adi,ad5679r
+          - adi,ad5681r
+          - adi,ad5682r
+          - adi,ad5683
+          - adi,ad5683r
+          - adi,ad5684
+          - adi,ad5684r
+          - adi,ad5685r
+          - adi,ad5686
+          - adi,ad5686r
+      - description: I2C devices
+        enum:
+          - adi,ad5311r
+          - adi,ad5337r
+          - adi,ad5338r
+          - adi,ad5671r
+          - adi,ad5675r
+          - adi,ad5691r
+          - adi,ad5692r
+          - adi,ad5693
+          - adi,ad5693r
+          - adi,ad5694
+          - adi,ad5694r
+          - adi,ad5695r
+          - adi,ad5696
+          - adi,ad5696r
+
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: If not supplied the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5310r";
+            vcc-supply = <&dac_vref0>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5696.yaml b/Bindings/iio/dac/adi,ad5696.yaml
new file mode 100644
index 0000000..56b0cda
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5696.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5696 and similar multi-channel DACs
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Binding for Analog Devices AD5696 and similar multi-channel DACs
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5311r
+      - adi,ad5338r
+      - adi,ad5671r
+      - adi,ad5675r
+      - adi,ad5691r
+      - adi,ad5692r
+      - adi,ad5693
+      - adi,ad5693r
+      - adi,ad5694
+      - adi,ad5694r
+      - adi,ad5695r
+      - adi,ad5696
+      - adi,ad5696r
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: |
+      The regulator supply for DAC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad5696: dac@0 {
+        compatible = "adi,ad5696";
+        reg = <0>;
+        vcc-supply = <&dac_vref>;
+      };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5755.yaml b/Bindings/iio/dac/adi,ad5755.yaml
new file mode 100644
index 0000000..9a3c292
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5755.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5755 Multi-Channel DAC
+
+maintainers:
+  - Sean Nyekjaer <sean.nyekjaer@prevas.dk>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5755
+      - adi,ad5755-1
+      - adi,ad5757
+      - adi,ad5735
+      - adi,ad5737
+
+  reg:
+    maxItems: 1
+
+  spi-cpha:
+    description: Either this or spi-cpol but not both.
+  spi-cpol: true
+
+  adi,ext-dc-dc-compenstation-resistor:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the hardware have an external resistor and thereby bypasses
+      the internal compensation resistor.
+
+  adi,dc-dc-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Valid values for DC DC Phase control is:
+      0: All dc-to-dc converters clock on the same edge.
+      1: Channel A and Channel B clock on the same edge,
+         Channel C and Channel D clock on opposite edges.
+      2: Channel A and Channel C clock on the same edge,
+         Channel B and Channel D clock on opposite edges.
+      3: Channel A, Channel B, Channel C, and Channel D
+         clock 90 degrees out of phase from each other.
+
+  adi,dc-dc-freq-hz:
+    enum: [250000, 410000, 650000]
+
+  adi,dc-dc-max-microvolt:
+    description:
+      Maximum allowed Vboost voltage supplied by the dc-to-dc converter.
+    enum: [23000000, 24500000, 27000000, 29500000]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        maxItems: 1
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+        description: |
+          Valid values for DAC modes is:
+          0: 0 V to 5 V voltage range.
+          1: 0 V to 10 V voltage range.
+          2: Plus minus 5 V voltage range.
+          3: Plus minus 10 V voltage range.
+          4: 4 mA to 20 mA current range.
+          5: 0 mA to 20 mA current range.
+          6: 0 mA to 24 mA current range.
+
+      adi,ext-current-sense-resistor:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Set if the hardware has an external current sense resistor
+
+      adi,enable-voltage-overrange:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Enable voltage overrange
+
+      adi,slew:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          Array of slewrate settings should contain 3 fields:
+          1: Should be either 0 or 1 in order to enable or disable slewrate.
+          2: Slew rate update frequency
+          3: Slew step size
+        items:
+          - enum: [0, 1]
+          - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0]
+          - enum: [1, 2, 4, 16, 32, 64, 128, 256]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad5755";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+            adi,dc-dc-phase = <0>;
+            adi,dc-dc-freq-hz = <410000>;
+            adi,dc-dc-max-microvolt = <23000000>;
+            channel@0 {
+                reg = <0>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5758.yaml b/Bindings/iio/dac/adi,ad5758.yaml
new file mode 100644
index 0000000..5121685
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5758.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5758 DAC
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+properties:
+  compatible:
+    const: adi,ad5758
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  adi,dc-dc-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description: |
+      Mode of operation of the dc-to-dc converter
+      Dynamic Power Control (DPC)
+      In this mode, the AD5758 circuitry senses the output voltage and
+      dynamically regulates the supply voltage, VDPC+, to meet compliance
+      requirements plus an optimized headroom voltage for the output buffer.
+
+      Programmable Power Control (PPC)
+      In this mode, the VDPC+ voltage is user-programmable to a fixed level
+      that needs to accommodate the maximum output load required.
+
+      The output of the DAC core is either converted to a current or
+      voltage output at the VIOUT pin. Only one mode can be enabled at
+      any one time.
+
+      The following values are currently supported:
+      * 1: DPC current mode
+      * 2: DPC voltage mode
+      * 3: PPC current mode
+
+      Depending on the selected output mode (voltage or current) one of the
+      two properties must be present:
+
+  adi,range-microvolt:
+    description: |
+      Voltage output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [5000000, 10000000]
+      - items:
+          - const: -5000000
+          - const: 5000000
+      - items:
+          - const: -10000000
+          - const: 10000000
+
+  adi,range-microamp:
+    description: |
+      Current output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [20000, 24000]
+      - items:
+          - const: 4
+          - const: 24000
+      - items:
+          - const: -20000
+          - const: 20000
+      - items:
+          - const: -24000
+          - const: 24000
+      - items:
+          - const: -1000
+          - const: 22000
+
+  reset-gpios:
+    maxItems: 1
+
+  adi,dc-dc-ilim-microamp:
+    enum: [150000, 200000, 250000, 300000, 350000, 400000]
+    description: |
+      The dc-to-dc converter current limit.
+
+  adi,slew-time-us:
+    description: |
+      The time it takes for the output to reach the full scale [uS]
+    minimum: 133
+    maximum: 1023984375
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - adi,dc-dc-mode
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        adi,dc-dc-mode:
+          enum: [1, 3]
+    then:
+      properties:
+        adi,range-microvolt: false
+      required:
+        - adi,range-microamp
+    else:
+      properties:
+        adi,range-microamp: false
+      required:
+        - adi,range-microvolt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5758";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+
+            reset-gpios = <&gpio 22 0>;
+
+            adi,dc-dc-mode = <2>;
+            adi,range-microvolt = <0 10000000>;
+            adi,dc-dc-ilim-microamp = <200000>;
+            adi,slew-time-us = <125000>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5761.yaml b/Bindings/iio/dac/adi,ad5761.yaml
new file mode 100644
index 0000000..df550b5
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5761.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5761 and similar DACs
+
+maintainers:
+  - Ricardo Ribalda <ribalda@kernel.org>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5721
+      - adi,ad5721r
+      - adi,ad5761
+      - adi,ad5761r
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not supplied, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5721
+              - adi,ad5761
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5721";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5764.yaml b/Bindings/iio/dac/adi,ad5764.yaml
new file mode 100644
index 0000000..0b409a7
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5764.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5744 and AD5764 DAC families
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5744
+      - adi,ad5744r
+      - adi,ad5764
+      - adi,ad5764r
+
+  reg:
+    maxItems: 1
+
+  vrefAB-supply: true
+  vrefCD-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5744
+              - adi,ad5764
+    then:
+      required:
+        - vrefAB-supply
+        - vrefCD-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5744";
+            reg = <0>;
+            vrefAB-supply = <&dac_vref>;
+            vrefCD-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5766.yaml b/Bindings/iio/dac/adi,ad5766.yaml
new file mode 100644
index 0000000..212c936
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5766.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5766 DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad5766-5767.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5766
+      - adi,ad5767
+
+  output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
+    description: Select converter output range.
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. As the line is active low, it
+      should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+required:
+  - compatible
+  - output-range-microvolts
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5766@0 {
+            compatible = "adi,ad5766";
+            output-range-microvolts = <(-5000000) 5000000>;
+            reg = <0>;
+            spi-cpol;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio 22 0>;
+        };
+    };
diff --git a/Bindings/iio/dac/adi,ad5770r.yaml b/Bindings/iio/dac/adi,ad5770r.yaml
new file mode 100644
index 0000000..82b0eed
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5770r.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5770R DAC device driver
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5770r
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      AVdd voltage supply. Represents two different supplies in the datasheet
+      that are in fact the same.
+
+  iovdd-supply:
+    description:
+      Voltage supply for the chip interface.
+
+  vref-supply:
+    description: Specify the voltage of the external reference used.
+      Available reference options are 1.25 V or 2.5 V. If no
+      external reference declared then the device will use the
+      internal reference of 1.25 V.
+
+  adi,external-resistor:
+    description: Specify if an external 2.5k ohm resistor is used. If not
+      specified the device will use an internal 2.5k ohm resistor.
+      The precision resistor is used for reference current generation.
+    type: boolean
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. If specified, it will be
+      asserted during driver probe.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  channel@0:
+    description: Represents an external channel which are
+      connected to the DAC. Channel 0 can act both as a current
+      source and sink.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 0
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 300000
+          - items:
+              - const: -60000
+              - const: 0
+          - items:
+              - const: -60000
+              - const: 300000
+
+  channel@1:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 1
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [140000, 250000]
+
+  channel@2:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 2
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [55000, 150000]
+
+patternProperties:
+  "^channel@([3-5])$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the DAC.
+    properties:
+      reg:
+        description: This represents the channel number.
+        minimum: 3
+        maximum: 5
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [45000, 100000]
+
+required:
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5770r@0 {
+            compatible = "adi,ad5770r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+            adi,external-resistor;
+            reset-gpios = <&gpio 22 0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,range-microamp = <0 300000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,range-microamp = <0 140000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,range-microamp = <0 55000>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                adi,range-microamp = <0 45000>;
+            };
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad5791.yaml b/Bindings/iio/dac/adi,ad5791.yaml
new file mode 100644
index 0000000..3a84739
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad5791.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5791.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5791 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5760
+      - adi,ad5780
+      - adi,ad5781
+      - adi,ad5790
+      - adi,ad5791
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vss-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vss-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5791";
+            reg = <0>;
+            vss-supply = <&dac_vss>;
+            vdd-supply = <&dac_vdd>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad7293.yaml b/Bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 0000000..5ee80bf
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad7303.yaml b/Bindings/iio/dac/adi,ad7303.yaml
new file mode 100644
index 0000000..1f00371
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad7303.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7303.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7303 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+properties:
+  compatible:
+    const: adi,ad7303
+
+  reg:
+    maxItems: 1
+
+  Vdd-supply:
+    description:
+      Used to calculate output channel scalling if REF-supply not specified.
+  REF-supply:
+    description:
+      If not provided, Vdd/2 is used as the reference voltage.
+
+  spi-max-frequency:
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+  - Vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4 {
+            compatible = "adi,ad7303";
+            reg = <4>;
+            spi-max-frequency = <10000000>;
+            Vdd-supply = <&vdd_supply>;
+            REF-supply = <&vref_supply>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ad8801.yaml b/Bindings/iio/dac/adi,ad8801.yaml
new file mode 100644
index 0000000..1849a2f
--- /dev/null
+++ b/Bindings/iio/dac/adi,ad8801.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8801 and AD8803 DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad8801
+      - adi,ad8803
+
+  reg:
+    maxItems: 1
+
+  vrefh-supply: true
+  vrefl-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefh-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad8803
+    then:
+      required:
+        - vrefl-supply
+    else:
+      properties:
+        vrefl-supply: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8803";
+            reg = <0>;
+            vrefl-supply = <&dac_vrefl>;
+            vrefh-supply = <&dac_vrefh>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/adi,ltc2688.yaml b/Bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 0000000..f22ef71
--- /dev/null
+++ b/Bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ltc2688: ltc2688@0 {
+            compatible = "adi,ltc2688";
+            reg = <0>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            vref-supply = <&vref>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                adi,overrange;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,output-range-microvolt = <0 10000000>;
+
+                clocks = <&clock_tgp3>;
+                adi,toggle-dither-input = <2>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/iio/dac/dpot-dac.yaml b/Bindings/iio/dac/dpot-dac.yaml
new file mode 100644
index 0000000..6a7ca8e
--- /dev/null
+++ b/Bindings/iio/dac/dpot-dac.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dpot-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAC emulation using a digital potentiometer
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  It is assumed that the dpot is used as a voltage divider between the
+  current dpot wiper setting and the maximum resistance of the dpot. The
+  divided voltage is provided by a vref regulator.
+
+                  .------.
+   .-----------.  |      |
+   | vref      |--'    .---.
+   | regulator |--.    |   |
+   '-----------'  |    | d |
+                  |    | p |
+                  |    | o |  wiper
+                  |    | t |<---------+
+                  |    |   |
+                  |    '---'       dac output voltage
+                  |      |
+                  '------+------------+
+
+properties:
+  compatible:
+    const: dpot-dac
+
+  vref-supply:
+    description: Regulator supplying the voltage divider.
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of the dpot to be used for the voltage division.
+
+  io-channel-names:
+    const: dpot
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - vref-supply
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+    };
+...
diff --git a/Bindings/iio/dac/fsl,vf610-dac.yaml b/Bindings/iio/dac/fsl,vf610-dac.yaml
new file mode 100644
index 0000000..999c715
--- /dev/null
+++ b/Bindings/iio/dac/fsl,vf610-dac.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/fsl,vf610-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale vf610 Digital to Analog Converter
+
+maintainers:
+  - Sanchayan Maity <maitysanchayan@gmail.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dac
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    bus@40000000 {
+        compatible = "fsl,aips-bus", "simple-bus";
+        reg = <0x40000000 0x00070000>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac@400cc000 {
+            compatible = "fsl,vf610-dac";
+            reg = <0x400cc000 0x1000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "dac";
+            clocks = <&clks VF610_CLK_DAC0>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/lltc,ltc1660.yaml b/Bindings/iio/dac/lltc,ltc1660.yaml
new file mode 100644
index 0000000..c9f51d0
--- /dev/null
+++ b/Bindings/iio/dac/lltc,ltc1660.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description: |
+  Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC.
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc1660
+      - lltc,ltc1665
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: Phandle to the external reference voltage supply.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@0 {
+        compatible = "lltc,ltc1660";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&vref_reg>;
+      };
+    };
diff --git a/Bindings/iio/dac/lltc,ltc2632.yaml b/Bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 0000000..733edc7
--- /dev/null
+++ b/Bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Linear Technology LTC2632/2634/2636 DAC
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2632-l12
+      - lltc,ltc2632-l10
+      - lltc,ltc2632-l8
+      - lltc,ltc2632-h12
+      - lltc,ltc2632-h10
+      - lltc,ltc2632-h8
+      - lltc,ltc2634-l12
+      - lltc,ltc2634-l10
+      - lltc,ltc2634-l8
+      - lltc,ltc2634-h12
+      - lltc,ltc2634-h10
+      - lltc,ltc2634-h8
+      - lltc,ltc2636-l12
+      - lltc,ltc2636-l10
+      - lltc,ltc2636-l8
+      - lltc,ltc2636-h12
+      - lltc,ltc2636-h10
+      - lltc,ltc2636-h8
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  vref-supply:
+    description:
+      Phandle to the external reference voltage supply. This should
+      only be set if there is an external reference voltage connected to the VREF
+      pin. If the property is not set the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    vref: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "vref-ltc2632";
+        regulator-min-microvolt = <1250000>;
+        regulator-max-microvolt = <1250000>;
+        regulator-always-on;
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "lltc,ltc2632-l12";
+            reg = <0>;    /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/maxim,ds4424.yaml b/Bindings/iio/dac/maxim,ds4424.yaml
new file mode 100644
index 0000000..264fa7c
--- /dev/null
+++ b/Bindings/iio/dac/maxim,ds4424.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,ds4424.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC
+
+maintainers:
+  - Ismail Kose <ihkose@gmail.com>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,ds4422
+      - maxim,ds4424
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@10 {
+            compatible = "maxim,ds4424";
+            reg = <0x10>; /* When A0, A1 pins are ground */
+            vcc-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/maxim,max5522.yaml b/Bindings/iio/dac/maxim,max5522.yaml
new file mode 100644
index 0000000..24830f5
--- /dev/null
+++ b/Bindings/iio/dac/maxim,max5522.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
+
+maintainers:
+  - Angelo Dureghello <angelo.dureghello@timesys.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet available at:
+  https://www.analog.com/en/products/max5522.html
+
+properties:
+  compatible:
+    const: maxim,max5522
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vrefin-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "maxim,max5522";
+            reg = <0>;
+            vrefin-supply = <&vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/maxim,max5821.yaml b/Bindings/iio/dac/maxim,max5821.yaml
new file mode 100644
index 0000000..c43fb5f
--- /dev/null
+++ b/Bindings/iio/dac/maxim,max5821.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max5821 dual 10-bit DAC
+
+maintainers:
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/MAX5821.pdf
+
+properties:
+  compatible:
+    const: maxim,max5821
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@38 {
+            compatible = "maxim,max5821";
+            reg = <0x38>;
+            vref-supply = <&reg_max5821>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/microchip,mcp4725.yaml b/Bindings/iio/dac/microchip,mcp4725.yaml
new file mode 100644
index 0000000..5f5b578
--- /dev/null
+++ b/Bindings/iio/dac/microchip,mcp4725.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4725.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp4725 and mcp4726 DAC
+
+maintainers:
+  - Tomas Novotny <tomas@novotny.cz>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4725
+      - microchip,mcp4726
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the mcp4725.
+      For the mcp4726 it will be used as the reference voltage if vref-supply
+      is not provided.
+
+  vref-supply:
+    description:
+      Vref pin is used as a voltage reference when this supply is specified.
+
+  microchip,vref-buffered:
+    type: boolean
+    description: |
+      Enable buffering of the external Vref pin. This boolean is not valid
+      without the vref-supply. Quoting the datasheet: This is offered in
+      cases where the reference voltage does not have the current
+      capability not to drop its voltage when connected to the internal
+      resistor ladder circuit.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4725
+    then:
+      properties:
+        vref-supply: false
+      required:
+        - vdd-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4726
+    then:
+      anyOf:
+        - required:
+            - vdd-supply
+        - required:
+            - vref-supply
+
+  - if:
+      not:
+        required:
+          - vref-supply
+    then:
+      properties:
+        microchip,vref-buffered: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mcp4725@60 {
+            compatible = "microchip,mcp4725";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/microchip,mcp4728.yaml b/Bindings/iio/dac/microchip,mcp4728.yaml
new file mode 100644
index 0000000..99831d7
--- /dev/null
+++ b/Bindings/iio/dac/microchip,mcp4728.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4728 DAC
+
+maintainers:
+  - Andrea Collamati <andrea.collamati@gmail.com>
+
+description: |
+  MCP4728 is a quad channel, 12-bit voltage output
+  Digital-to-Analog Converter with non-volatile
+  memory and I2C compatible Serial Interface.
+  https://www.microchip.com/en-us/product/mcp4728
+
+properties:
+  compatible:
+    const: microchip,mcp4728
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the MCP4728
+      when Internal Vref is not selected.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@60 {
+            compatible = "microchip,mcp4728";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
diff --git a/Bindings/iio/dac/microchip,mcp4922.yaml b/Bindings/iio/dac/microchip,mcp4922.yaml
new file mode 100644
index 0000000..1937440
--- /dev/null
+++ b/Bindings/iio/dac/microchip,mcp4922.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4902, MCP4912 and MPC4922 dual output SPI DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4902
+      - microchip,mcp4912
+      - microchip,mcp4921
+      - microchip,mcp4922
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4912";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/nxp,lpc1850-dac.yaml b/Bindings/iio/dac/nxp,lpc1850-dac.yaml
new file mode 100644
index 0000000..9c8afe3
--- /dev/null
+++ b/Bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 DAC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Supports the DAC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac: dac@400e1000 {
+            compatible = "nxp,lpc1850-dac";
+            reg = <0x400e1000 0x1000>;
+            interrupts = <0>;
+            clocks = <&ccu1 CLK_APB3_DAC>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 42>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/st,stm32-dac.yaml b/Bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 0000000..04045b9
--- /dev/null
+++ b/Bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DAC
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...
diff --git a/Bindings/iio/dac/ti,dac082s085.yaml b/Bindings/iio/dac/ti,dac082s085.yaml
new file mode 100644
index 0000000..201b04a
--- /dev/null
+++ b/Bindings/iio/dac/ti,dac082s085.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac082s085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC082s085 and similar DACs
+
+description:
+  A family of Texas Instruments 8/10/12-bit 2/4-channel DACs
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac082s085
+      - ti,dac102s085
+      - ti,dac122s085
+      - ti,dac084s085
+      - ti,dac104s085
+      - ti,dac124s085
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol:
+    description:
+      Must be either spi-cpha, or spi-cpol but not both.
+
+  vref-supply:
+    description: Needed to provide output scaling.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    vref_2v5_reg: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "2v5";
+        regulator-min-microvolt = <2500000>;
+        regulator-max-microvolt = <2500000>;
+        regulator-always-on;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac082s085";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            spi-cpol;
+            vref-supply = <&vref_2v5_reg>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/ti,dac5571.yaml b/Bindings/iio/dac/ti,dac5571.yaml
new file mode 100644
index 0000000..79da032
--- /dev/null
+++ b/Bindings/iio/dac/ti,dac5571.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac5571.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5571 Family
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac5571
+      - ti,dac6571
+      - ti,dac7571
+      - ti,dac5574
+      - ti,dac6574
+      - ti,dac7574
+      - ti,dac5573
+      - ti,dac6573
+      - ti,dac7573
+      - ti,dac121c081
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4c {
+            compatible = "ti,dac5571";
+            reg = <0x4c>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/ti,dac7311.yaml b/Bindings/iio/dac/ti,dac7311.yaml
new file mode 100644
index 0000000..a681458
--- /dev/null
+++ b/Bindings/iio/dac/ti,dac7311.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5311 and similar SPI DACs
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7311
+      - ti,dac6311
+      - ti,dac5311
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7311";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/ti,dac7512.yaml b/Bindings/iio/dac/ti,dac7512.yaml
new file mode 100644
index 0000000..4277cf8
--- /dev/null
+++ b/Bindings/iio/dac/ti,dac7512.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7512.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7512 DAC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,dac7512
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Maximum frequency is reduced for supply voltage of less than 3.6V
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7512";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Bindings/iio/dac/ti,dac7612.yaml b/Bindings/iio/dac/ti,dac7612.yaml
new file mode 100644
index 0000000..20dd137
--- /dev/null
+++ b/Bindings/iio/dac/ti,dac7612.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7612.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7612 family of DACs
+
+description:
+  The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
+  guaranteed 12-bit monotonicity performance over the industrial temperature
+  range. Is is programmable through an SPI interface.
+
+maintainers:
+  - Ricardo Ribalda Delgado <ricardo@ribalda.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7612
+      - ti,dac7612u
+      - ti,dac7612ub
+
+  reg:
+    maxItems: 1
+
+  ti,loaddacs-gpios:
+    description:
+      DACs are loaded when the pin connected to this GPIO is pulled low.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@1 {
+            compatible = "ti,dac7612";
+            reg = <0x1>;
+            ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+...