Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/hwmon/pwm-fan.yaml b/Bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 0000000..4e5abf7
--- /dev/null
+++ b/Bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+ - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+ compatible:
+ const: pwm-fan
+
+ cooling-levels:
+ description: PWM duty cycle values corresponding to thermal cooling states.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ maximum: 255
+
+ fan-supply:
+ description: Phandle to the regulator that provides power to the fan.
+
+ interrupts:
+ description:
+ This contains an interrupt specifier for each fan tachometer output
+ connected to an interrupt source. The output signal must generate a
+ defined number of interrupts per fan revolution, which require that
+ it must be self resetting edge interrupts.
+ maxItems: 1
+
+ pulses-per-revolution:
+ description:
+ Define the number of pulses per fan revolution for each tachometer
+ input as an integer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 4
+ default: 2
+
+ pwms:
+ description: The PWM that is used to control the fan.
+ maxItems: 1
+
+ "#cooling-cells": true
+
+required:
+ - compatible
+ - pwms
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 102 170 230>;
+ pwms = <&pwm 0 10000 0>;
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ thermal-sensors = <&tmu 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 0 1>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <®_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ pulses-per-revolution = <2>;
+ };