Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/gpio/gpio-aspeed.txt b/Bindings/gpio/gpio-aspeed.txt
new file mode 100644
index 0000000..b2033fc
--- /dev/null
+++ b/Bindings/gpio/gpio-aspeed.txt
@@ -0,0 +1,39 @@
+Aspeed GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
+ or "aspeed,ast2600-gpio".
+
+- #gpio-cells : Should be two
+ - First cell is the GPIO line number
+ - Second cell is used to specify optional
+ parameters (unused)
+
+- reg : Address and length of the register set for the device
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt specifier (see interrupt bindings for
+ details)
+- interrupt-controller : Mark the GPIO controller as an interrupt-controller
+
+Optional properties:
+
+- clocks : A phandle to the clock to use for debounce timings
+- ngpios : Number of GPIOs controlled by this controller. Should be set
+ when there are multiple GPIO controllers on a SoC (ast2600).
+
+The gpio and interrupt properties are further described in their respective
+bindings documentation:
+
+- Documentation/devicetree/bindings/gpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+ Example:
+ gpio@1e780000 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2400-gpio";
+ gpio-controller;
+ interrupts = <20>;
+ reg = <0x1e780000 0x1000>;
+ interrupt-controller;
+ };