Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/gnss/brcm,bcm4751.yaml b/Bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 0000000..c21549e
--- /dev/null
+++ b/Bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ Broadcom GPS chips can be used over the UART or I2C bus. The UART
+ bus requires CTS/RTS support. The number of the capsule is more
+ elaborate than the compatibles BCM4751 may be printed
+ BCM4751IFBG for example.
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm4751
+ - brcm,bcm4752
+ - brcm,bcm4753
+
+ reg:
+ description:
+ The I2C Address, not required on UART buses.
+
+ vdd-auxin-supply:
+ description:
+ Main voltage supply, pin name VDD_AUXIN, typically connected
+ directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+ vddio-supply:
+ description:
+ IO voltage supply, pin name VDDIO, typically 1.8V
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional active low reset line, should be flagged with
+ GPIO_ACTIVE_LOW.
+
+ enable-gpios:
+ description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+ If the line is active low such as NSTANDBY, it should be tagged
+ GPIO_ACTIVE_LOW.
+
+required:
+ - compatible
+ - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "brcm,bcm4751";
+ vdd-auxin-supply = <&vbat>;
+ reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ current-speed = <38400>;
+ };
+ };