Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/fpga/xlnx,fpga-slave-serial.yaml b/Bindings/fpga/xlnx,fpga-slave-serial.yaml
new file mode 100644
index 0000000..614d86a
--- /dev/null
+++ b/Bindings/fpga/xlnx,fpga-slave-serial.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Slave Serial SPI FPGA
+
+maintainers:
+ - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+ Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
+ over what is referred to as slave serial interface.The slave serial link is
+ not technically SPI, and might require extra circuits in order to play nicely
+ with other SPI slaves on the same bus.
+
+ Datasheets:
+ https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+ https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+ https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - xlnx,fpga-slave-serial
+
+ spi-cpha: true
+
+ spi-max-frequency:
+ maximum: 60000000
+
+ reg:
+ maxItems: 1
+
+ prog_b-gpios:
+ description:
+ config pin (referred to as PROGRAM_B in the manual)
+ maxItems: 1
+
+ done-gpios:
+ description:
+ config status pin (referred to as DONE in the manual)
+ maxItems: 1
+
+ init-b-gpios:
+ description:
+ initialization status and configuration error pin
+ (referred to as INIT_B in the manual)
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - prog_b-gpios
+ - done-gpios
+ - init-b-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fpga_mgr_spi: fpga-mgr@0 {
+ compatible = "xlnx,fpga-slave-serial";
+ spi-max-frequency = <60000000>;
+ spi-cpha;
+ reg = <0>;
+ prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+...