Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/dma/st,stm32-mdma.yaml b/Bindings/dma/st,stm32-mdma.yaml
new file mode 100644
index 0000000..3874544
--- /dev/null
+++ b/Bindings/dma/st,stm32-mdma.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 MDMA Controller
+
+description: |
+ The STM32 MDMA is a general-purpose direct memory access controller capable of
+ supporting 64 independent DMA channels with 256 HW requests.
+ DMA clients connected to the STM32 MDMA controller must use the format
+ described in the dma.txt file, using a five-cell specifier for each channel:
+ a phandle to the MDMA controller plus the following five integer cells:
+ 1. The request line number
+ 2. The priority level
+ 0x0: Low
+ 0x1: Medium
+ 0x2: High
+ 0x3: Very high
+ 3. A 32bit mask specifying the DMA channel configuration
+ -bit 0-1: Source increment mode
+ 0x0: Source address pointer is fixed
+ 0x2: Source address pointer is incremented after each data transfer
+ 0x3: Source address pointer is decremented after each data transfer
+ -bit 2-3: Destination increment mode
+ 0x0: Destination address pointer is fixed
+ 0x2: Destination address pointer is incremented after each data transfer
+ 0x3: Destination address pointer is decremented after each data transfer
+ -bit 8-9: Source increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 10-11: Destination increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 25-18: The number of bytes to be transferred in a single transfer
+ (min = 1 byte, max = 128 bytes)
+ -bit 29:28: Trigger Mode
+ 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+ 0x1: Each MDMA request triggers a block transfer (max 64K bytes)
+ 0x2: Each MDMA request triggers a repeated block transfer
+ 0x3: Each MDMA request triggers a linked list transfer
+ 4. A 32bit value specifying the register to be used to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+ 5. A 32bit mask specifying the value to be written to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ "#dma-cells":
+ const: 5
+
+ compatible:
+ const: st,stm32h7-mdma
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ st,ahb-addr-masks:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Array of u32 mask to list memory devices addressed via AHB bus.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-controller@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&timer_clk>;
+ resets = <&rcc 992>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+ };
+
+...