diff --git a/Bindings/display/ste,mcde.yaml b/Bindings/display/ste,mcde.yaml
new file mode 100644
index 0000000..564ea84
--- /dev/null
+++ b/Bindings/display/ste,mcde.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Multi Channel Display Engine MCDE
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: ste,mcde
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: an array of the MCDE clocks
+    items:
+      - description: MCDECLK (main MCDE clock)
+      - description: LCDCLK (LCD clock)
+      - description: PLLDSI (HDMI clock)
+
+  clock-names:
+    items:
+      - const: mcde
+      - const: lcd
+      - const: hdmi
+
+  resets:
+    maxItems: 1
+
+  epod-supply:
+    description: a phandle to the EPOD regulator
+
+  vana-supply:
+    description: a phandle to the analog voltage regulator
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A DPI port node
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^dsi@[0-9a-f]+$":
+    description: subnodes for the three DSI host adapters
+    type: object
+    $ref: dsi-controller.yaml#
+
+    properties:
+      compatible:
+        const: ste,mcde-dsi
+
+      reg:
+        maxItems: 1
+
+      vana-supply:
+        description: a phandle to the analog voltage regulator
+
+      clocks:
+        description: phandles to the high speed and low power (energy save) clocks
+          the high speed clock is not present on the third (dsi2) block, so it
+          should only have the "lp" clock
+        minItems: 1
+        maxItems: 2
+
+      clock-names:
+        oneOf:
+          - items:
+              - const: hs
+              - const: lp
+          - items:
+              - const: lp
+
+    required:
+      - compatible
+      - reg
+      - vana-supply
+      - clocks
+      - clock-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - epod-supply
+  - vana-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mcde@a0350000 {
+      compatible = "ste,mcde";
+      reg = <0xa0350000 0x1000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      epod-supply = <&db8500_b2r2_mcde_reg>;
+      vana-supply = <&ab8500_ldo_ana_reg>;
+      clocks = <&prcmu_clk PRCMU_MCDECLK>,
+               <&prcmu_clk PRCMU_LCDCLK>,
+               <&prcmu_clk PRCMU_PLLDSI>;
+      clock-names = "mcde", "lcd", "hdmi";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      dsi0: dsi@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+          compatible = "samsung,s6d16d0";
+          reg = <0>;
+          vdd1-supply = <&ab8500_ldo_aux1_reg>;
+          reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+      };
+
+      dsi1: dsi@a0352000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0352000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      dsi2: dsi@a0353000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0353000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        /* This DSI port only has the Low Power / Energy Save clock */
+        clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+        clock-names = "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
+
+...