diff --git a/Bindings/display/panel/sharp,ls037v7dw01.yaml b/Bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 0000000..8c47a9b
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+  This panel can have zero to five GPIOs to configure to change configuration
+  between QVGA and VGA mode and the scan direction. As these pins can be also
+  configured with external pulls, all the GPIOs are considered optional with holes
+  in the array.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls037v7dw01
+
+  label: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+  mode-gpios:
+    minItems: 1
+    maxItems: 3
+    description: |
+      GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+      This panel can have zero to three GPIOs to configure to
+      change configuration between QVGA and VGA mode and the
+      scan direction. As these pins can be also configured
+      with external pulls, all the GPIOs are considered
+      optional with holes in the array.
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lcd0: display {
+        compatible = "sharp,ls037v7dw01";
+        power-supply = <&lcd_3v3>;
+        enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;    /* gpio152, lcd INI */
+        reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;     /* gpio155, lcd RESB */
+        mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH        /* gpio154, lcd MO */
+                      &gpio1 2 GPIO_ACTIVE_HIGH         /* gpio2, lcd LR */
+                      &gpio1 3 GPIO_ACTIVE_HIGH>;       /* gpio3, lcd UD */
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+    };
+
+...