diff --git a/Bindings/cpufreq/apple,cluster-cpufreq.yaml b/Bindings/cpufreq/apple,cluster-cpufreq.yaml
new file mode 100644
index 0000000..76cb972
--- /dev/null
+++ b/Bindings/cpufreq/apple,cluster-cpufreq.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC cluster cpufreq device
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
+  the cluster management register block. This binding uses the standard
+  operating-points-v2 table to define the CPU performance states, with the
+  opp-level property specifying the hardware p-state index for that level.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-cluster-cpufreq
+              - apple,t8112-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t6000-cluster-cpufreq
+          - const: apple,t8103-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+
+  reg:
+    maxItems: 1
+
+  '#performance-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#performance-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // This example shows a single CPU per domain and 2 domains,
+    // with two p-states per domain.
+    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "apple,icestorm";
+        device_type = "cpu";
+        reg = <0x0 0x0>;
+        operating-points-v2 = <&ecluster_opp>;
+        performance-domains = <&cpufreq_e>;
+      };
+
+      cpu@10100 {
+        compatible = "apple,firestorm";
+        device_type = "cpu";
+        reg = <0x0 0x10100>;
+        operating-points-v2 = <&pcluster_opp>;
+        performance-domains = <&cpufreq_p>;
+      };
+    };
+
+    ecluster_opp: opp-table-0 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <7500>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <972000000>;
+        opp-level = <2>;
+        clock-latency-ns = <22000>;
+      };
+    };
+
+    pcluster_opp: opp-table-1 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <8000>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <828000000>;
+        opp-level = <2>;
+        clock-latency-ns = <19000>;
+      };
+    };
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      cpufreq_e: performance-controller@210e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x10e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+
+      cpufreq_p: performance-controller@211e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x11e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+    };
diff --git a/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
new file mode 100644
index 0000000..ce91a91
--- /dev/null
+++ b/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -0,0 +1,76 @@
+Broadcom AVS mail box and interrupt register bindings
+=====================================================
+
+A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
+references the mailbox register used to communicate with the AVS CPU[1]. The
+second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
+the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
+command sent to it by a driver. Interrupting the AVS CPU is mandatory for
+commands to be processed.
+
+The interface also requires a reference to the AVS host interrupt controller,
+so a driver can react to interrupts generated by the AVS CPU whenever a command
+has been processed. See [2] for more information on the brcm,l2-intc node.
+
+[1] The AVS CPU is an independent co-processor that runs proprietary
+firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
+Adaptive Voltage Scaling.
+
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
+
+
+Node brcm,avs-cpu-data-mem
+--------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-data-mem and
+              should include: one of brcm,bcm7271-avs-cpu-data-mem or
+                              brcm,bcm7268-avs-cpu-data-mem
+- reg: Specifies base physical address and size of the registers.
+- interrupts: The interrupt that the AVS CPU will use to interrupt the host
+              when a command completed.
+- interrupt-names: The name of the interrupt used to interrupt the host.
+
+Optional properties:
+- None
+
+Node brcm,avs-cpu-l2-intr
+-------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-l2-intr and
+              should include: one of brcm,bcm7271-avs-cpu-l2-intr or
+                              brcm,bcm7268-avs-cpu-l2-intr
+- reg: Specifies base physical address and size of the registers.
+
+Optional properties:
+- None
+
+
+Example
+=======
+
+	avs_host_l2_intc: interrupt-controller@f04d1200 {
+		#interrupt-cells = <1>;
+		compatible = "brcm,l2-intc";
+		interrupt-parent = <&intc>;
+		reg = <0xf04d1200 0x48>;
+		interrupt-controller;
+		interrupts = <0x0 0x19 0x0>;
+		interrupt-names = "avs";
+	};
+
+	avs-cpu-data-mem@f04c4000 {
+		compatible = "brcm,bcm7271-avs-cpu-data-mem",
+				"brcm,avs-cpu-data-mem";
+		reg = <0xf04c4000 0x60>;
+		interrupts = <0x1a>;
+		interrupt-parent = <&avs_host_l2_intc>;
+		interrupt-names = "sw_intr";
+	};
+
+	avs-cpu-l2-intr@f04d1100 {
+		compatible = "brcm,bcm7271-avs-cpu-l2-intr",
+				"brcm,avs-cpu-l2-intr";
+		reg = <0xf04d1100 0x10>;
+	};
diff --git a/Bindings/cpufreq/cpufreq-dt.txt b/Bindings/cpufreq/cpufreq-dt.txt
new file mode 100644
index 0000000..1d7e491
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-dt.txt
@@ -0,0 +1,61 @@
+Generic cpufreq driver
+
+It is a generic DT based cpufreq driver for frequency management.  It supports
+both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
+clock and voltage across all CPUs.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- None
+
+Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
+  details. OPPs *must* be supplied either via DT, i.e. this property, or
+  populated at runtime.
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
+- #cooling-cells:
+     Please refer to
+     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+		#cooling-cells = <2>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a9";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a9";
+		reg = <2>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a9";
+		reg = <3>;
+		next-level-cache = <&L2>;
+	};
+};
diff --git a/Bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Bindings/cpufreq/cpufreq-mediatek-hw.yaml
new file mode 100644
index 0000000..d0aecde
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek's CPUFREQ
+
+maintainers:
+  - Hector Yuan <hector.yuan@mediatek.com>
+
+description:
+  CPUFREQ HW is a hardware engine used by MediaTek SoCs to
+  manage frequency in hardware. It is capable of controlling
+  frequency for multiple clusters.
+
+properties:
+  compatible:
+    const: mediatek,cpufreq-hw
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      Addresses and sizes for the memory of the HW bases in
+      each frequency domain. Each entry corresponds to
+      a register bank for each frequency domain present.
+
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier.
+      Set const to 1 here for nodes providing multiple
+      performance domains.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#performance-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a55";
+                enable-method = "psci";
+                performance-domains = <&performance 0>;
+                reg = <0x000>;
+            };
+    };
+
+    /* ... */
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
diff --git a/Bindings/cpufreq/cpufreq-mediatek.txt b/Bindings/cpufreq/cpufreq-mediatek.txt
new file mode 100644
index 0000000..e0a4ba5
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-mediatek.txt
@@ -0,0 +1,250 @@
+Binding for MediaTek's CPUFreq driver
+=====================================
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
+	for detail.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+- mediatek,cci:
+	Used to confirm the link status between cpufreq and mediatek cci. Because
+	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
+	To prevent the issue of high frequency and low voltage, we need to use this
+	property to make sure mediatek cci is ready.
+	For details of mediatek cci, please refer to
+	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
+- #cooling-cells:
+	For details, please refer to
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+
+Example 1 (MT7623 SoC):
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x0>;
+		clocks = <&infracfg CLK_INFRA_CPUSEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table>;
+		#cooling-cells = <2>;
+	};
+	cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x1>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x2>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x3>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+
+Example 2 (MT8173 SoC):
+	cpu_opp_table_a: opp_table_a {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+
+		opp-1183000000 {
+			opp-hz = /bits/ 64 <1183000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1083000>;
+		};
+
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+
+		opp-1573000000 {
+			opp-hz = /bits/ 64 <1573000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu_opp_table_b: opp_table_b {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1007000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+
+		opp-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
diff --git a/Bindings/cpufreq/cpufreq-qcom-hw.yaml b/Bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 0000000..56fc71d
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,369 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sdm670-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm8150-cpufreq-hw
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdx75-cpufreq-epss
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+              - qcom,sm8650-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 1
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+      - description: Frequency domain 3 register region
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+      - const: freq-domain3
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: dcvsh-irq-0
+      - const: dcvsh-irq-1
+      - const: dcvsh-irq-2
+      - const: dcvsh-irq-3
+
+  '#freq-domain-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        reg-names:
+          minItems: 1
+          maxItems: 1
+
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+        interrupt-names:
+          minItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm670-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm6375-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        # On some SoCs the Prime core shares the LMH irq with Big cores
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+            cache-unified;
+            cache-level = <3>;
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/Bindings/cpufreq/cpufreq-spear.txt b/Bindings/cpufreq/cpufreq-spear.txt
new file mode 100644
index 0000000..f3d4498
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-spear.txt
@@ -0,0 +1,42 @@
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+  increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+  unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+	<...>
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+
+		<...>
+
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+	};
+
+	<...>
+
+};
diff --git a/Bindings/cpufreq/cpufreq-st.txt b/Bindings/cpufreq/cpufreq-st.txt
new file mode 100644
index 0000000..6b0b452
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-st.txt
@@ -0,0 +1,89 @@
+Binding for ST's CPUFreq driver
+===============================
+
+ST's CPUFreq driver attempts to read 'process' and 'version' attributes
+from the SoC, then supplies the OPP framework with 'prop' and 'supported
+hardware' information respectively.  The framework is then able to read
+the DT and operate in the usual way.
+
+Frequency Scaling only
+----------------------
+
+No vendor specific driver required for this.
+
+Located in CPU's node:
+
+- operating-points		: [See: ../power/opp-v1.yaml]
+
+Example [safe]
+--------------
+
+cpus {
+	cpu@0 {
+				 /* kHz     uV   */
+		operating-points = <1500000 0
+				    1200000 0
+				    800000  0
+				    500000  0>;
+	};
+};
+
+Dynamic Voltage and Frequency Scaling (DVFS)
+--------------------------------------------
+
+This requires the ST CPUFreq driver to supply 'process' and 'version' info.
+
+Located in CPU's node:
+
+- operating-points-v2		: [See ../power/opp-v2.yaml]
+
+Example [unsafe]
+----------------
+
+cpus {
+	cpu@0 {
+		operating-points-v2	= <&cpu0_opp_table>;
+	};
+};
+
+cpu0_opp_table: opp_table {
+	compatible = "operating-points-v2";
+
+	/* ############################################################### */
+	/* # WARNING: Do not attempt to copy/replicate these nodes,      # */
+	/* #          they are only to be supplied by the bootloader !!! # */
+	/* ############################################################### */
+	opp0 {
+		/*			   Major       Minor       Substrate */
+		/*			   2           all         all       */
+		opp-supported-hw	= <0x00000004  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1500000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1200000>;
+		opp-microvolt-pcode1	= <1200000>;
+		opp-microvolt-pcode2	= <1200000>;
+		opp-microvolt-pcode3	= <1200000>;
+		opp-microvolt-pcode4	= <1170000>;
+		opp-microvolt-pcode5	= <1140000>;
+		opp-microvolt-pcode6	= <1100000>;
+		opp-microvolt-pcode7	= <1070000>;
+	};
+
+	opp1 {
+		/*			   Major       Minor       Substrate */
+		/*			   all         all         all       */
+		opp-supported-hw	= <0xffffffff  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1200000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1110000>;
+		opp-microvolt-pcode1	= <1150000>;
+		opp-microvolt-pcode2	= <1100000>;
+		opp-microvolt-pcode3	= <1080000>;
+		opp-microvolt-pcode4	= <1040000>;
+		opp-microvolt-pcode5	= <1020000>;
+		opp-microvolt-pcode6	= <980000>;
+		opp-microvolt-pcode7	= <930000>;
+	};
+};
diff --git a/Bindings/cpufreq/imx-cpufreq-dt.txt b/Bindings/cpufreq/imx-cpufreq-dt.txt
new file mode 100644
index 0000000..87bff5a
--- /dev/null
+++ b/Bindings/cpufreq/imx-cpufreq-dt.txt
@@ -0,0 +1,37 @@
+i.MX CPUFreq-DT OPP bindings
+================================
+
+Certain i.MX SoCs support different OPPs depending on the "market segment" and
+"speed grading" value which are written in fuses. These bits are combined with
+the opp-supported-hw values for each OPP to check if the OPP is allowed.
+
+Required properties:
+--------------------
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitmaps indicating:
+  - Supported speed grade mask
+  - Supported market segment mask
+    0: Consumer
+    1: Extended Consumer
+    2: Industrial
+    3: Automotive
+
+Example:
+--------
+
+opp_table {
+	compatible = "operating-points-v2";
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		/* grade >= 0, consumer only */
+		opp-supported-hw = <0xf>, <0x3>;
+	};
+
+	opp-1300000000 {
+		opp-hz = /bits/ 64 <1300000000>;
+		opp-microvolt = <1000000>;
+		/* grade >= 1, all segments */
+		opp-supported-hw = <0xe>, <0x7>;
+	};
+}
diff --git a/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt
new file mode 100644
index 0000000..03196d5
--- /dev/null
+++ b/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt
@@ -0,0 +1,40 @@
+Tegra124 CPU frequency scaling driver bindings
+----------------------------------------------
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - cpu_g: Clock mux for the fast CPU cluster.
+  - pll_x: Fast PLL clocksource.
+  - pll_p: Auxiliary PLL used during fast PLL rate changes.
+  - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+
+Example:
+--------
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+
+		clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+			 <&tegra_car TEGRA124_CLK_PLL_X>,
+			 <&tegra_car TEGRA124_CLK_PLL_P>,
+			 <&dfll>;
+		clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
+		clock-latency = <300000>;
+	};
+
+	<...>
+};
diff --git a/Bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 0000000..bdbfd7c
--- /dev/null
+++ b/Bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,56 @@
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for the CPU clock.
+  See ../clocks/clock-bindings.txt for details.
+- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitfields indicating:
+	On Tegra20:
+	1. CPU process ID mask
+	2. SoC speedo ID mask
+
+	On Tegra30:
+	1. CPU process ID mask
+	2. CPU speedo ID mask
+
+	A bitwise AND is performed against these values and if any bit
+	matches, the OPP gets enabled.
+
+- opp-microvolt: CPU voltage triplet.
+
+Optional properties:
+- cpu-supply: Phandle to the CPU power supply.
+
+Example:
+	regulators {
+		cpu_reg: regulator0 {
+			regulator-name = "vdd_cpu";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@456000000 {
+			clock-latency-ns = <125000>;
+			opp-microvolt = <825000 825000 1125000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		...
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&cpu_reg>;
+			#cooling-cells = <2>;
+		};
+	};
diff --git a/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 0000000..547265b
--- /dev/null
+++ b/Bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq5332
+          - qcom,ipq6018
+          - qcom,ipq8064
+          - qcom,ipq8074
+          - qcom,ipq9574
+          - qcom,msm8909
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    allOf:
+      - if:
+          properties:
+            compatible:
+              enum:
+                - operating-points-v2-krait-cpu
+                - operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404
+
+    then:
+      properties:
+        cpus:
+          type: object
+
+          patternProperties:
+            '^cpu@[0-9a-f]+$':
+              type: object
+
+              properties:
+                power-domains:
+                  maxItems: 1
+
+                power-domain-names:
+                  items:
+                    - const: cpr
+
+              required:
+                - power-domains
+                - power-domain-names
+
+      patternProperties:
+        '^opp-table(-[a-z0-9]+)?$':
+          if:
+            properties:
+              compatible:
+                const: operating-points-v2-kryo-cpu
+          then:
+            patternProperties:
+              '^opp-?[0-9]+$':
+                required:
+                  - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };