Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/clock/renesas,5p35023.yaml b/Bindings/clock/renesas,5p35023.yaml
new file mode 100644
index 0000000..42b6f80
--- /dev/null
+++ b/Bindings/clock/renesas,5p35023.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+ The 5P35023 is a VersaClock programmable clock generator and
+ is designed for low-power, consumer, and high-performance PCI
+ express applications. The 5P35023 device is a three PLL
+ architecture design, and each PLL is individually programmable
+ and allowing for up to 6 unique frequency outputs.
+
+ An internal OTP memory allows the user to store the configuration
+ in the device. After power up, the user can change the device register
+ settings through the I2C interface when I2C mode is selected.
+
+ The driver can read a full register map from the DT, and will use that
+ register map to initialize the attached part (via I2C) when the system
+ boots. Any configuration not supported by the common clock framework
+ must be done via the full register map, including optimized settings.
+
+ Link to datasheet:
+ https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator
+
+properties:
+ compatible:
+ enum:
+ - renesas,5p35023
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ description:
+ The index in the assigned-clocks is mapped to the output clock as below
+ 0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ renesas,settings:
+ description: Optional, complete register map of the device.
+ Optimized settings for the device must be provided in full
+ and are written during initialization.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ maxItems: 37
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ versa3: clock-generator@68 {
+ compatible = "renesas,5p35023";
+ reg = <0x68>;
+ #clock-cells = <1>;
+
+ clocks = <&x1>;
+
+ renesas,settings = [
+ 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+ 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+ 80 b0 45 c4 95
+ ];
+
+ assigned-clocks = <&versa3 0>, <&versa3 1>,
+ <&versa3 2>, <&versa3 3>,
+ <&versa3 4>, <&versa3 5>;
+ assigned-clock-rates = <24000000>, <11289600>,
+ <11289600>, <12000000>,
+ <25000000>, <12288000>;
+ };
+ };