Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/ata/ahci-common.yaml b/Bindings/ata/ahci-common.yaml
new file mode 100644
index 0000000..38770c4
--- /dev/null
+++ b/Bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+ - Hans de Goede <hdegoede@redhat.com>
+ - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+ This document defines device tree properties for a common AHCI SATA
+ controller implementation. It's hardware interface is supposed to
+ conform to the technical standard defined by Intel (see Serial ATA
+ Advanced Host Controller Interface specification for details). The
+ document doesn't constitute a DT-node binding by itself but merely
+ defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+ - $ref: sata-common.yaml#
+
+properties:
+ reg:
+ description:
+ Generic AHCI registers space conforming to the Serial ATA AHCI
+ specification.
+
+ reg-names:
+ description: CSR space IDs
+ contains:
+ const: ahci
+
+ interrupts:
+ description:
+ Generic AHCI state change interrupt. Can be implemented either as a
+ single line attached to the controller or as a set of the signals
+ indicating the particular port events.
+ minItems: 1
+ maxItems: 32
+
+ ahci-supply:
+ description: Power regulator for AHCI controller
+
+ target-supply:
+ description: Power regulator for SATA target device
+
+ phy-supply:
+ description: Power regulator for SATA PHY
+
+ phys:
+ description: Reference to the SATA PHY node
+ maxItems: 1
+
+ phy-names:
+ const: sata-phy
+
+ hba-cap:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Bitfield of the HBA generic platform capabilities like Staggered
+ Spin-up or Mechanical Presence Switch support. It can be used to
+ appropriately initialize the HWinit fields of the HBA CAP register
+ in case if the system firmware hasn't done it.
+
+ ports-implemented:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Mask that indicates which ports the HBA supports. Useful if PI is not
+ programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+ "^sata-port@[0-9a-f]+$":
+ $ref: '#/$defs/ahci-port'
+ description:
+ It is optionally possible to describe the ports as sub-nodes so
+ to enable each port independently when dealing with multiple PHYs.
+
+required:
+ - reg
+ - interrupts
+
+additionalProperties: true
+
+$defs:
+ ahci-port:
+ $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+ properties:
+ reg:
+ description:
+ AHCI SATA port identifier. By design AHCI controller can't have
+ more than 32 ports due to the CAP.NP fields and PI register size
+ constraints.
+ minimum: 0
+ maximum: 31
+
+ phys:
+ description: Individual AHCI SATA port PHY
+ maxItems: 1
+
+ phy-names:
+ description: AHCI SATA port PHY ID
+ const: sata-phy
+
+ target-supply:
+ description: Power regulator for SATA port target device
+
+ hba-port-cap:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Bitfield of the HBA port-specific platform capabilities like Hot
+ plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+ for details). It can be used to initialize the HWinit fields of
+ the PxCMD register in case if the system firmware hasn't done it.
+
+ required:
+ - reg
+
+...