Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/arm/pmu.yaml b/Bindings/arm/pmu.yaml
new file mode 100644
index 0000000..99b5e95
--- /dev/null
+++ b/Bindings/arm/pmu.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Performance Monitor Units
+
+maintainers:
+ - Mark Rutland <mark.rutland@arm.com>
+ - Will Deacon <will.deacon@arm.com>
+
+description: |+
+ ARM cores often have a PMU for counting cpu and cache events like cache misses
+ and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+ representation in the device tree should be done as under:-
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apm,potenza-pmu
+ - apple,avalanche-pmu
+ - apple,blizzard-pmu
+ - apple,firestorm-pmu
+ - apple,icestorm-pmu
+ - arm,armv8-pmuv3 # Only for s/w models
+ - arm,arm1136-pmu
+ - arm,arm1176-pmu
+ - arm,arm11mpcore-pmu
+ - arm,cortex-a5-pmu
+ - arm,cortex-a7-pmu
+ - arm,cortex-a8-pmu
+ - arm,cortex-a9-pmu
+ - arm,cortex-a12-pmu
+ - arm,cortex-a15-pmu
+ - arm,cortex-a17-pmu
+ - arm,cortex-a32-pmu
+ - arm,cortex-a34-pmu
+ - arm,cortex-a35-pmu
+ - arm,cortex-a53-pmu
+ - arm,cortex-a55-pmu
+ - arm,cortex-a57-pmu
+ - arm,cortex-a65-pmu
+ - arm,cortex-a72-pmu
+ - arm,cortex-a73-pmu
+ - arm,cortex-a75-pmu
+ - arm,cortex-a76-pmu
+ - arm,cortex-a77-pmu
+ - arm,cortex-a78-pmu
+ - arm,cortex-a510-pmu
+ - arm,cortex-a520-pmu
+ - arm,cortex-a710-pmu
+ - arm,cortex-a715-pmu
+ - arm,cortex-a720-pmu
+ - arm,cortex-x1-pmu
+ - arm,cortex-x2-pmu
+ - arm,cortex-x3-pmu
+ - arm,cortex-x4-pmu
+ - arm,neoverse-e1-pmu
+ - arm,neoverse-n1-pmu
+ - arm,neoverse-n2-pmu
+ - arm,neoverse-v1-pmu
+ - brcm,vulcan-pmu
+ - cavium,thunder-pmu
+ - nvidia,denver-pmu
+ - nvidia,carmel-pmu
+ - qcom,krait-pmu
+ - qcom,scorpion-pmu
+ - qcom,scorpion-mp-pmu
+
+ interrupts:
+ # Don't know how many CPUs, so no constraints to specify
+ description: 1 per-cpu interrupt (PPI) or 1 interrupt per core.
+
+ interrupt-affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ When using SPIs, specifies a list of phandles to CPU
+ nodes corresponding directly to the affinity of
+ the SPIs listed in the interrupts property.
+
+ When using a PPI, specifies a list of phandles to CPU
+ nodes corresponding to the set of CPUs which have
+ a PMU of this type signalling the PPI listed in the
+ interrupts property, unless this is already specified
+ by the PPI interrupt specifier itself (in which case
+ the interrupt-affinity property shouldn't be present).
+
+ This property should be present when there is more than
+ a single SPI.
+
+ qcom,no-pc-write:
+ type: boolean
+ description:
+ Indicates that this PMU doesn't support the 0xc and 0xd events.
+
+ secure-reg-access:
+ type: boolean
+ description:
+ Indicates that the ARMv7 Secure Debug Enable Register
+ (SDER) is accessible. This will cause the driver to do
+ any setup required that is only possible in ARMv7 secure
+ state. If not present the ARMv7 SDER will not be touched,
+ which means the PMU may fail to operate unless external
+ code (bootloader or security monitor) has performed the
+ appropriate initialisation. Note that this property is
+ not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
+ in Non-secure state.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+...