Merge branch 'master' of git://git.denx.de/u-boot-sh
diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index 5b95682..52d0d3c 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -27,7 +27,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o iopin.o
+COBJS-y := $(BOARD).o
COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 8452054..ba3d7d2 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -23,14 +23,12 @@
#include <common.h>
#include <mpc512x.h>
-#include "iopin.h"
#include <asm/bitops.h>
#include <command.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
-#include "iopin.h" /* for iopin_initialize() prototype */
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
@@ -124,7 +122,7 @@
u32 i;
/* Initialize IO Control */
- im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+ im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
/* Initialize DDR Local Window */
im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
@@ -237,6 +235,56 @@
return 0;
}
+static iopin_t ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
int checkboard (void)
{
@@ -246,7 +294,9 @@
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
- iopin_initialize();
+
+
+ iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
return 0;
}
diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c
deleted file mode 100644
index a6792a0..0000000
--- a/board/ads5121/iopin.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include "iopin.h"
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
-#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
-#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
-#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
-#define IO_PIN_DS(v) ((v)) /* slew rate */
-
-static struct iopin_t {
- int p_offset; /* offset from IOCTL_MEM_OFFSET */
- int nr_pins; /* number of pins to set this way */
- int bit_or; /* or in the value instead of overwrite */
- u_long val; /* value to write or or */
-} ioregs_init[] = {
- /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
- {
- IOCTL_SPDIF_TXCLK, 3, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* Set highest Slew on 9 PATA pins */
- {
- IOCTL_PATA_CE1, 9, 1,
- IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
- {
- IOCTL_PSC0_0, 15, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=SPDIF_TXCLK */
- {
- IOCTL_LPC_CS1, 1, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
- {
- IOCTL_I2C1_SCL, 2, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU CLK */
- {
- IOCTL_PSC6_0, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU_HSYNC */
- {
- IOCTL_PSC6_1, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
- {
- IOCTL_PSC6_4, 26, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- }
-};
-
-void iopin_initialize(void)
-{
- short i, j, n, p;
- u_long *reg;
- immap_t *im = (immap_t *)CFG_IMMR;
-
- reg = (u_long *)&(im->io_ctrl.regs[0]);
-
- if (sizeof(ioregs_init) == 0)
- return;
-
- n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
-
- for (i = 0; i < n; i++) {
- for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
- p < ioregs_init[i].nr_pins; p++, j++) {
- if (ioregs_init[i].bit_or)
- reg[j] |= ioregs_init[i].val;
- else
- reg[j] = ioregs_init[i].val;
- }
- }
- return;
-}
diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h
deleted file mode 100644
index 7ef8472..0000000
--- a/board/ads5121/iopin.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define IOCTL_MEM 0x000
-#define IOCTL_GP 0x004
-#define IOCTL_LPC_CLK 0x008
-#define IOCTL_LPC_OE 0x00C
-#define IOCTL_LPC_RWB 0x010
-#define IOCTL_LPC_ACK 0x014
-#define IOCTL_LPC_CS0 0x018
-#define IOCTL_NFC_CE0 0x01C
-#define IOCTL_LPC_CS1 0x020
-#define IOCTL_LPC_CS2 0x024
-#define IOCTL_LPC_AX03 0x028
-#define IOCTL_EMB_AX02 0x02C
-#define IOCTL_EMB_AX01 0x030
-#define IOCTL_EMB_AX00 0x034
-#define IOCTL_EMB_AD31 0x038
-#define IOCTL_EMB_AD30 0x03C
-#define IOCTL_EMB_AD29 0x040
-#define IOCTL_EMB_AD28 0x044
-#define IOCTL_EMB_AD27 0x048
-#define IOCTL_EMB_AD26 0x04C
-#define IOCTL_EMB_AD25 0x050
-#define IOCTL_EMB_AD24 0x054
-#define IOCTL_EMB_AD23 0x058
-#define IOCTL_EMB_AD22 0x05C
-#define IOCTL_EMB_AD21 0x060
-#define IOCTL_EMB_AD20 0x064
-#define IOCTL_EMB_AD19 0x068
-#define IOCTL_EMB_AD18 0x06C
-#define IOCTL_EMB_AD17 0x070
-#define IOCTL_EMB_AD16 0x074
-#define IOCTL_EMB_AD15 0x078
-#define IOCTL_EMB_AD14 0x07C
-#define IOCTL_EMB_AD13 0x080
-#define IOCTL_EMB_AD12 0x084
-#define IOCTL_EMB_AD11 0x088
-#define IOCTL_EMB_AD10 0x08C
-#define IOCTL_EMB_AD09 0x090
-#define IOCTL_EMB_AD08 0x094
-#define IOCTL_EMB_AD07 0x098
-#define IOCTL_EMB_AD06 0x09C
-#define IOCTL_EMB_AD05 0x0A0
-#define IOCTL_EMB_AD04 0x0A4
-#define IOCTL_EMB_AD03 0x0A8
-#define IOCTL_EMB_AD02 0x0AC
-#define IOCTL_EMB_AD01 0x0B0
-#define IOCTL_EMB_AD00 0x0B4
-#define IOCTL_PATA_CE1 0x0B8
-#define IOCTL_PATA_CE2 0x0BC
-#define IOCTL_PATA_ISOLATE 0x0C0
-#define IOCTL_PATA_IOR 0x0C4
-#define IOCTL_PATA_IOW 0x0C8
-#define IOCTL_PATA_IOCHRDY 0x0CC
-#define IOCTL_PATA_INTRQ 0x0D0
-#define IOCTL_PATA_DRQ 0x0D4
-#define IOCTL_PATA_DACK 0x0D8
-#define IOCTL_NFC_WP 0x0DC
-#define IOCTL_NFC_RB 0x0E0
-#define IOCTL_NFC_ALE 0x0E4
-#define IOCTL_NFC_CLE 0x0E8
-#define IOCTL_NFC_WE 0x0EC
-#define IOCTL_NFC_RE 0x0F0
-#define IOCTL_PCI_AD31 0x0F4
-#define IOCTL_PCI_AD30 0x0F8
-#define IOCTL_PCI_AD29 0x0FC
-#define IOCTL_PCI_AD28 0x100
-#define IOCTL_PCI_AD27 0x104
-#define IOCTL_PCI_AD26 0x108
-#define IOCTL_PCI_AD25 0x10C
-#define IOCTL_PCI_AD24 0x110
-#define IOCTL_PCI_AD23 0x114
-#define IOCTL_PCI_AD22 0x118
-#define IOCTL_PCI_AD21 0x11C
-#define IOCTL_PCI_AD20 0x120
-#define IOCTL_PCI_AD19 0x124
-#define IOCTL_PCI_AD18 0x128
-#define IOCTL_PCI_AD17 0x12C
-#define IOCTL_PCI_AD16 0x130
-#define IOCTL_PCI_AD15 0x134
-#define IOCTL_PCI_AD14 0x138
-#define IOCTL_PCI_AD13 0x13C
-#define IOCTL_PCI_AD12 0x140
-#define IOCTL_PCI_AD11 0x144
-#define IOCTL_PCI_AD10 0x148
-#define IOCTL_PCI_AD09 0x14C
-#define IOCTL_PCI_AD08 0x150
-#define IOCTL_PCI_AD07 0x154
-#define IOCTL_PCI_AD06 0x158
-#define IOCTL_PCI_AD05 0x15C
-#define IOCTL_PCI_AD04 0x160
-#define IOCTL_PCI_AD03 0x164
-#define IOCTL_PCI_AD02 0x168
-#define IOCTL_PCI_AD01 0x16C
-#define IOCTL_PCI_AD00 0x170
-#define IOCTL_PCI_CBE0 0x174
-#define IOCTL_PCI_CBE1 0x178
-#define IOCTL_PCI_CBE2 0x17C
-#define IOCTL_PCI_CBE3 0x180
-#define IOCTL_PCI_GNT2 0x184
-#define IOCTL_PCI_REQ2 0x188
-#define IOCTL_PCI_GNT1 0x18C
-#define IOCTL_PCI_REQ1 0x190
-#define IOCTL_PCI_GNT0 0x194
-#define IOCTL_PCI_REQ0 0x198
-#define IOCTL_PCI_INTA 0x19C
-#define IOCTL_PCI_CLK 0x1A0
-#define IOCTL_PCI_RST_OUT 0x1A4
-#define IOCTL_PCI_FRAME 0x1A8
-#define IOCTL_PCI_IDSEL 0x1AC
-#define IOCTL_PCI_DEVSEL 0x1B0
-#define IOCTL_PCI_IRDY 0x1B4
-#define IOCTL_PCI_TRDY 0x1B8
-#define IOCTL_PCI_STOP 0x1BC
-#define IOCTL_PCI_PAR 0x1C0
-#define IOCTL_PCI_PERR 0x1C4
-#define IOCTL_PCI_SERR 0x1C8
-#define IOCTL_SPDIF_TXCLK 0x1CC
-#define IOCTL_SPDIF_TX 0x1D0
-#define IOCTL_SPDIF_RX 0x1D4
-#define IOCTL_I2C0_SCL 0x1D8
-#define IOCTL_I2C0_SDA 0x1DC
-#define IOCTL_I2C1_SCL 0x1E0
-#define IOCTL_I2C1_SDA 0x1E4
-#define IOCTL_I2C2_SCL 0x1E8
-#define IOCTL_I2C2_SDA 0x1EC
-#define IOCTL_IRQ0 0x1F0
-#define IOCTL_IRQ1 0x1F4
-#define IOCTL_CAN1_TX 0x1F8
-#define IOCTL_CAN2_TX 0x1FC
-#define IOCTL_J1850_TX 0x200
-#define IOCTL_J1850_RX 0x204
-#define IOCTL_PSC_MCLK_IN 0x208
-#define IOCTL_PSC0_0 0x20C
-#define IOCTL_PSC0_1 0x210
-#define IOCTL_PSC0_2 0x214
-#define IOCTL_PSC0_3 0x218
-#define IOCTL_PSC0_4 0x21C
-#define IOCTL_PSC1_0 0x220
-#define IOCTL_PSC1_1 0x224
-#define IOCTL_PSC1_2 0x228
-#define IOCTL_PSC1_3 0x22C
-#define IOCTL_PSC1_4 0x230
-#define IOCTL_PSC2_0 0x234
-#define IOCTL_PSC2_1 0x238
-#define IOCTL_PSC2_2 0x23C
-#define IOCTL_PSC2_3 0x240
-#define IOCTL_PSC2_4 0x244
-#define IOCTL_PSC3_0 0x248
-#define IOCTL_PSC3_1 0x24C
-#define IOCTL_PSC3_2 0x250
-#define IOCTL_PSC3_3 0x254
-#define IOCTL_PSC3_4 0x258
-#define IOCTL_PSC4_0 0x25C
-#define IOCTL_PSC4_1 0x260
-#define IOCTL_PSC4_2 0x264
-#define IOCTL_PSC4_3 0x268
-#define IOCTL_PSC4_4 0x26C
-#define IOCTL_PSC5_0 0x270
-#define IOCTL_PSC5_1 0x274
-#define IOCTL_PSC5_2 0x278
-#define IOCTL_PSC5_3 0x27C
-#define IOCTL_PSC5_4 0x280
-#define IOCTL_PSC6_0 0x284
-#define IOCTL_PSC6_1 0x288
-#define IOCTL_PSC6_2 0x28C
-#define IOCTL_PSC6_3 0x290
-#define IOCTL_PSC6_4 0x294
-#define IOCTL_PSC7_0 0x298
-#define IOCTL_PSC7_1 0x29C
-#define IOCTL_PSC7_2 0x2A0
-#define IOCTL_PSC7_3 0x2A4
-#define IOCTL_PSC7_4 0x2A8
-#define IOCTL_PSC8_0 0x2AC
-#define IOCTL_PSC8_1 0x2B0
-#define IOCTL_PSC8_2 0x2B4
-#define IOCTL_PSC8_3 0x2B8
-#define IOCTL_PSC8_4 0x2BC
-#define IOCTL_PSC9_0 0x2C0
-#define IOCTL_PSC9_1 0x2C4
-#define IOCTL_PSC9_2 0x2C8
-#define IOCTL_PSC9_3 0x2CC
-#define IOCTL_PSC9_4 0x2D0
-#define IOCTL_PSC10_0 0x2D4
-#define IOCTL_PSC10_1 0x2D8
-#define IOCTL_PSC10_2 0x2DC
-#define IOCTL_PSC10_3 0x2E0
-#define IOCTL_PSC10_4 0x2E4
-#define IOCTL_PSC11_0 0x2E8
-#define IOCTL_PSC11_1 0x2EC
-#define IOCTL_PSC11_2 0x2F0
-#define IOCTL_PSC11_3 0x2F4
-#define IOCTL_PSC11_4 0x2F8
-#define IOCTL_HRESET 0x2FC
-#define IOCTL_SRESET 0x300
-#define IOCTL_CKSTP_OUT 0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS 0x310
-
-extern void iopin_initialize(void);
diff --git a/common/image.c b/common/image.c
index 535c302..c3545a7 100644
--- a/common/image.c
+++ b/common/image.c
@@ -833,7 +833,7 @@
rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset);
if (rd_noffset < 0) {
debug ("* ramdisk: no ramdisk in config\n");
- return 1;
+ return 0;
}
}
#endif
diff --git a/common/lcd.c b/common/lcd.c
index e3347ec..8d770f3 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -793,7 +793,7 @@
sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
- sprintf (info, "(C) 2004 DENX Software Engineering");
+ sprintf (info, "(C) 2008 DENX Software Engineering GmbH");
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
(uchar *)info, strlen(info));
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
index 2be35b2..8ba8ae8 100644
--- a/cpu/mpc512x/Makefile
+++ b/cpu/mpc512x/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index b59f36d..81bae41 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -131,22 +131,69 @@
#endif
#ifdef CONFIG_OF_LIBFDT
-void ft_cpu_setup(void *blob, bd_t *bd)
+
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+/*
+ * fdt setup for old device trees
+ * fix up
+ * cpu clocks
+ * soc clocks
+ * ethernet addresses
+ */
+static void old_ft_cpu_setup(void *blob, bd_t *bd)
{
+ /*
+ * avoid fixing up by path because that
+ * produces scary error messages
+ */
+
+ /*
+ * old device trees have ethernet nodes with
+ * device_type = "network"
+ */
+ do_fixup_by_prop(blob, "device_type", "network", 8,
+ "local-mac-address", bd->bi_enetaddr, 6, 0);
+ do_fixup_by_prop(blob, "device_type", "network", 8,
+ "address", bd->bi_enetaddr, 6, 0);
+ /*
+ * old device trees have soc nodes with
+ * device_type = "soc"
+ */
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_ipsfreq, 0);
+}
+#endif
+
+static void ft_clock_setup(void *blob, bd_t *bd)
+{
+ int node;
char *cpu_path = "/cpus/" OF_CPU;
- char *eth_path = "/" OF_SOC "/ethernet@2800";
- char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800";
+ const char *path = NULL;
- do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipsfreq, 1);
- do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
+ /*
+ * fixup cpu clocks using path
+ */
+ do_fixup_by_path_u32(blob, cpu_path,
+ "timebase-frequency", OF_TBCLK, 1);
+ do_fixup_by_path_u32(blob, cpu_path,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_path_u32(blob, cpu_path,
+ "clock-frequency", bd->bi_intfreq, 1);
+ /*
+ * fixup soc clocks using compatible
+ */
+ do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
+ "bus-frequency", bd->bi_ipsfreq, 1);
+}
- /* this is so old kernels with old device trees will boot */
- do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0);
- do_fixup_by_path(blob, eth_path_old, "local-mac-address",
- bd->bi_enetaddr, 6, 0);
- do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0);
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+ old_ft_cpu_setup(blob, bd);
+#endif
+ ft_clock_setup(blob, bd);
+#ifdef CONFIG_HAS_ETH0
+ fdt_fixup_ethernet(blob, bd);
+#endif
}
#endif
diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
new file mode 100644
index 0000000..01ab34a
--- /dev/null
+++ b/cpu/mpc512x/iopin.c
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <mpc512x.h>
+
+void iopin_initialize(iopin_t *ioregs_init, int len)
+{
+ short i, j, n, p;
+ u_long *reg;
+ immap_t *im = (immap_t *)CFG_IMMR;
+
+ reg = (u_long *)&(im->io_ctrl.regs[0]);
+
+ if (sizeof(ioregs_init) == 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or)
+ reg[j] |= ioregs_init[i].val;
+ else
+ reg[j] = ioregs_init[i].val;
+ }
+ }
+ return;
+}
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 12647ef..479075c 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -158,13 +158,13 @@
/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
#ifdef CFG_MAX_FLASH_BANKS_DETECT
-static ulong bank_base[CFG_MAX_FLASH_BANKS_DETECT] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS_DETECT]; /* FLASH chips info */
+# define CFI_MAX_FLASH_BANKS CFG_MAX_FLASH_BANKS_DETECT
#else
-static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* FLASH chips info */
+# define CFI_MAX_FLASH_BANKS CFG_MAX_FLASH_BANKS
#endif
+flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
+
/*
* Check if chip width is defined. If not, start detecting with 8bit.
*/
@@ -1912,12 +1912,14 @@
char *s = getenv("unlock");
#endif
+#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CFG_FLASH_BANKS_LIST)[i])
+
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
- if (!flash_detect_legacy (bank_base[i], i))
- flash_get_size (bank_base[i], i);
+ if (!flash_detect_legacy (BANK_BASE(i), i))
+ flash_get_size (BANK_BASE(i), i);
size += flash_info[i].size;
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
#ifndef CFG_FLASH_QUIET_TEST
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index d2c430b..ba89247 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -29,6 +29,7 @@
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
+#include "miiphy.h"
#if defined(CONFIG_QE)
@@ -125,6 +126,13 @@
};
#endif
+#define MAXCONTROLLERS (4)
+
+static struct eth_device *devlist[MAXCONTROLLERS];
+
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
uec_t *uec_regs;
@@ -629,6 +637,39 @@
adjust_link(dev);
}
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+static int uec_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ *value = uec_read_phy_reg(devlist[0], addr, reg);
+
+ return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+static int uec_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ uec_write_phy_reg(devlist[0], addr, reg, value);
+
+ return 0;
+}
+
+#endif
+
static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
{
uec_t *uec_regs;
@@ -1334,6 +1375,8 @@
return -EINVAL;
}
+ devlist[index] = dev;
+
uec->uec_info = uec_info;
sprintf(dev->name, "FSL UEC%d", index);
@@ -1356,6 +1399,13 @@
return err;
}
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+ miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
+#endif
+
return 1;
}
+
+
#endif /* CONFIG_QE */
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 252b00e..2bdbb59 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -28,6 +28,7 @@
COBJS-y += isp116x-hcd.o
COBJS-y += sl811_usb.o
COBJS-y += usb_ohci.o
+COBJS-y += r8a66597-hcd.o
COBJS-y += usbdcore.o
COBJS-y += usbdcore_ep0.o
COBJS-y += usbdcore_mpc8xx.o
diff --git a/drivers/usb/r8a66597-hcd.c b/drivers/usb/r8a66597-hcd.c
new file mode 100644
index 0000000..3eb4cb0
--- /dev/null
+++ b/drivers/usb/r8a66597-hcd.c
@@ -0,0 +1,924 @@
+/*
+ * R8A66597 HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+
+#include "r8a66597.h"
+
+#if defined(CONFIG_USB_R8A66597_HCD)
+
+#ifdef R8A66597_DEBUG
+#define R8A66597_DPRINT printf
+#else
+#define R8A66597_DPRINT(...)
+#endif
+
+static const char hcd_name[] = "r8a66597_hcd";
+static unsigned short clock = CONFIG_R8A66597_XTAL;
+static unsigned short vif = CONFIG_R8A66597_LDRV;
+static unsigned short endian = CONFIG_R8A66597_ENDIAN;
+static struct r8a66597 gr8a66597;
+
+static void set_devadd_reg(struct r8a66597 *r8a66597, u8 r8a66597_address,
+ u16 usbspd, u8 upphub, u8 hubport, int port)
+{
+ u16 val;
+ unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
+
+ val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
+ r8a66597_write(r8a66597, val, devadd_reg);
+}
+
+static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
+{
+ u16 tmp;
+ int i = 0;
+
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+ do {
+ r8a66597_write(r8a66597, SCKE, SYSCFG0);
+ tmp = r8a66597_read(r8a66597, SYSCFG0);
+ if (i++ > 1000) {
+ printf("register access fail.\n");
+ return -1;
+ }
+ } while ((tmp & SCKE) != SCKE);
+ r8a66597_write(r8a66597, 0x04, 0x02);
+#else
+ do {
+ r8a66597_write(r8a66597, USBE, SYSCFG0);
+ tmp = r8a66597_read(r8a66597, SYSCFG0);
+ if (i++ > 1000) {
+ printf("register access fail.\n");
+ return -1;
+ }
+ } while ((tmp & USBE) != USBE);
+ r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+ r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+
+ i = 0;
+ r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+ do {
+ udelay(1000);
+ tmp = r8a66597_read(r8a66597, SYSCFG0);
+ if (i++ > 500) {
+ printf("register access fail.\n");
+ return -1;
+ }
+ } while ((tmp & SCKE) != SCKE);
+#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
+
+ return 0;
+}
+
+static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
+{
+ r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+ udelay(1);
+#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+ r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+ r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+ r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+#endif
+}
+
+static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
+{
+ u16 val;
+
+ val = port ? DRPD : DCFM | DRPD;
+ r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
+ r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+
+ r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
+}
+
+static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
+{
+ u16 val, tmp;
+
+ r8a66597_write(r8a66597, 0, get_intenb_reg(port));
+ r8a66597_write(r8a66597, 0, get_intsts_reg(port));
+
+ r8a66597_port_power(r8a66597, port, 0);
+
+ do {
+ tmp = r8a66597_read(r8a66597, SOFCFG) & EDGESTS;
+ udelay(640);
+ } while (tmp == EDGESTS);
+
+ val = port ? DRPD : DCFM | DRPD;
+ r8a66597_bclr(r8a66597, val, get_syscfg_reg(port));
+ r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+}
+
+static int enable_controller(struct r8a66597 *r8a66597)
+{
+ int ret, port;
+
+ ret = r8a66597_clock_enable(r8a66597);
+ if (ret < 0)
+ return ret;
+
+ r8a66597_bset(r8a66597, vif & LDRV, PINCFG);
+ r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+ r8a66597_bset(r8a66597, INTL, SOFCFG);
+ r8a66597_write(r8a66597, 0, INTENB0);
+ r8a66597_write(r8a66597, 0, INTENB1);
+ r8a66597_write(r8a66597, 0, INTENB2);
+
+ r8a66597_bset(r8a66597, endian & BIGEND, CFIFOSEL);
+ r8a66597_bset(r8a66597, endian & BIGEND, D0FIFOSEL);
+ r8a66597_bset(r8a66597, endian & BIGEND, D1FIFOSEL);
+ r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
+
+ for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+ r8a66597_enable_port(r8a66597, port);
+
+ return 0;
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+ int i;
+
+ if (!(r8a66597_read(r8a66597, SYSCFG0) & USBE))
+ return;
+
+ r8a66597_write(r8a66597, 0, INTENB0);
+ r8a66597_write(r8a66597, 0, INTSTS0);
+
+ r8a66597_write(r8a66597, 0, D0FIFOSEL);
+ r8a66597_write(r8a66597, 0, D1FIFOSEL);
+ r8a66597_write(r8a66597, 0, DCPCFG);
+ r8a66597_write(r8a66597, 0x40, DCPMAXP);
+ r8a66597_write(r8a66597, 0, DCPCTR);
+
+ for (i = 0; i <= 10; i++)
+ r8a66597_write(r8a66597, 0, get_devadd_addr(i));
+ for (i = 1; i <= 5; i++) {
+ r8a66597_write(r8a66597, 0, get_pipetre_addr(i));
+ r8a66597_write(r8a66597, 0, get_pipetrn_addr(i));
+ }
+ for (i = 1; i < R8A66597_MAX_NUM_PIPE; i++) {
+ r8a66597_write(r8a66597, 0, get_pipectr_addr(i));
+ r8a66597_write(r8a66597, i, PIPESEL);
+ r8a66597_write(r8a66597, 0, PIPECFG);
+ r8a66597_write(r8a66597, 0, PIPEBUF);
+ r8a66597_write(r8a66597, 0, PIPEMAXP);
+ r8a66597_write(r8a66597, 0, PIPEPERI);
+ }
+
+ for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++)
+ r8a66597_disable_port(r8a66597, i);
+
+ r8a66597_clock_disable(r8a66597);
+}
+
+static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
+ u16 mask, u16 loop)
+{
+ u16 tmp;
+ int i = 0;
+
+ do {
+ tmp = r8a66597_read(r8a66597, reg);
+ if (i++ > 1000000) {
+ printf("register%lx, loop %x is timeout\n", reg, loop);
+ break;
+ }
+ } while ((tmp & mask) != loop);
+}
+
+static void pipe_buffer_setting(struct r8a66597 *r8a66597,
+ struct usb_device *dev, unsigned long pipe)
+{
+ u16 val = 0;
+ u16 pipenum, bufnum, maxpacket;
+
+ if (usb_pipein(pipe)) {
+ pipenum = BULK_IN_PIPENUM;
+ bufnum = BULK_IN_BUFNUM;
+ maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
+ } else {
+ pipenum = BULK_OUT_PIPENUM;
+ bufnum = BULK_OUT_BUFNUM;
+ maxpacket = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
+ }
+
+ if (r8a66597->pipe_config & (1 << pipenum))
+ return;
+ r8a66597->pipe_config |= (1 << pipenum);
+
+ r8a66597_bset(r8a66597, ACLRM, get_pipectr_addr(pipenum));
+ r8a66597_bclr(r8a66597, ACLRM, get_pipectr_addr(pipenum));
+ r8a66597_write(r8a66597, pipenum, PIPESEL);
+
+ /* FIXME: This driver support bulk transfer only. */
+ if (!usb_pipein(pipe))
+ val |= R8A66597_DIR;
+ else
+ val |= R8A66597_SHTNAK;
+ val |= R8A66597_BULK | R8A66597_DBLB | usb_pipeendpoint(pipe);
+ r8a66597_write(r8a66597, val, PIPECFG);
+
+ r8a66597_write(r8a66597, (8 << 10) | bufnum, PIPEBUF);
+ r8a66597_write(r8a66597, make_devsel(usb_pipedevice(pipe)) |
+ maxpacket, PIPEMAXP);
+ r8a66597_write(r8a66597, 0, PIPEPERI);
+ r8a66597_write(r8a66597, SQCLR, get_pipectr_addr(pipenum));
+}
+
+static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
+ struct devrequest *setup)
+{
+ int i;
+ unsigned short *p = (unsigned short *)setup;
+ unsigned long setup_addr = USBREQ;
+ u16 intsts1;
+ int timeout = 3000;
+ u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
+
+ r8a66597_write(r8a66597, make_devsel(devsel) |
+ (8 << dev->maxpacketsize), DCPMAXP);
+ r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
+
+ for (i = 0; i < 4; i++) {
+ r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
+ setup_addr += 2;
+ }
+ r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
+ r8a66597_write(r8a66597, SUREQ, DCPCTR);
+
+ while (1) {
+ intsts1 = r8a66597_read(r8a66597, INTSTS1);
+ if (intsts1 & SACK)
+ break;
+ if (intsts1 & SIGN) {
+ printf("setup packet send error\n");
+ return -1;
+ }
+ if (timeout-- < 0) {
+ printf("setup packet timeout\n");
+ return -1;
+ }
+ udelay(500);
+ }
+
+ return 0;
+}
+
+static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int transfer_len)
+{
+ u16 tmp, bufsize;
+ u16 *buf;
+ size_t size;
+
+ R8A66597_DPRINT("%s\n", __func__);
+
+ r8a66597_mdfy(r8a66597, MBW | BULK_OUT_PIPENUM,
+ MBW | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, BULK_OUT_PIPENUM);
+ tmp = r8a66597_read(r8a66597, CFIFOCTR);
+ if ((tmp & FRDY) == 0) {
+ printf("%s FRDY is not set (%x)\n", __func__, tmp);
+ return -1;
+ }
+
+ /* prepare parameters */
+ bufsize = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
+ buf = (u16 *)(buffer + dev->act_len);
+ size = min((int)bufsize, transfer_len - dev->act_len);
+
+ /* write fifo */
+ r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
+ if (buffer) {
+ r8a66597_write_fifo(r8a66597, CFIFO, buf, size);
+ r8a66597_write(r8a66597, BVAL, CFIFOCTR);
+ }
+
+ /* update parameters */
+ dev->act_len += size;
+
+ r8a66597_mdfy(r8a66597, PID_BUF, PID,
+ get_pipectr_addr(BULK_OUT_PIPENUM));
+
+ while (!(r8a66597_read(r8a66597, BEMPSTS) & (1 << BULK_OUT_PIPENUM)))
+ if (ctrlc())
+ return -1;
+ r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
+
+ if (dev->act_len >= transfer_len)
+ r8a66597_mdfy(r8a66597, PID_NAK, PID,
+ get_pipectr_addr(BULK_OUT_PIPENUM));
+
+ return 0;
+}
+
+static int receive_bulk_packet(struct r8a66597 *r8a66597,
+ struct usb_device *dev,
+ unsigned long pipe,
+ void *buffer, int transfer_len)
+{
+ u16 tmp;
+ u16 *buf;
+ const u16 pipenum = BULK_IN_PIPENUM;
+ int rcv_len;
+ int maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
+
+ R8A66597_DPRINT("%s\n", __func__);
+
+ /* prepare */
+ if (dev->act_len == 0) {
+ r8a66597_mdfy(r8a66597, PID_NAK, PID,
+ get_pipectr_addr(pipenum));
+ r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+
+ r8a66597_write(r8a66597, TRCLR, get_pipetre_addr(pipenum));
+ r8a66597_write(r8a66597,
+ (transfer_len + maxpacket - 1) / maxpacket,
+ get_pipetrn_addr(pipenum));
+ r8a66597_bset(r8a66597, TRENB, get_pipetre_addr(pipenum));
+
+ r8a66597_mdfy(r8a66597, PID_BUF, PID,
+ get_pipectr_addr(pipenum));
+ }
+
+ r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
+
+ while (!(r8a66597_read(r8a66597, BRDYSTS) & (1 << pipenum)))
+ if (ctrlc())
+ return -1;
+ r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+
+ tmp = r8a66597_read(r8a66597, CFIFOCTR);
+ if ((tmp & FRDY) == 0) {
+ printf("%s FRDY is not set. (%x)\n", __func__, tmp);
+ return -1;
+ }
+
+ buf = (u16 *)(buffer + dev->act_len);
+ rcv_len = tmp & DTLN;
+ dev->act_len += rcv_len;
+
+ if (buffer) {
+ if (rcv_len == 0)
+ r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+ else
+ r8a66597_read_fifo(r8a66597, CFIFO, buf, rcv_len);
+ }
+
+ return 0;
+}
+
+static int receive_control_packet(struct r8a66597 *r8a66597,
+ struct usb_device *dev,
+ void *buffer, int transfer_len)
+{
+ u16 tmp;
+ int rcv_len;
+
+ /* FIXME: limit transfer size : 64byte or less */
+
+ r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+ r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+ r8a66597_bset(r8a66597, SQSET, DCPCTR);
+ r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+ r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
+
+ while (!(r8a66597_read(r8a66597, BRDYSTS) & 0x0001))
+ if (ctrlc())
+ return -1;
+ r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
+
+ r8a66597_mdfy(r8a66597, MBW, MBW | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+
+ tmp = r8a66597_read(r8a66597, CFIFOCTR);
+ if ((tmp & FRDY) == 0) {
+ printf("%s FRDY is not set. (%x)\n", __func__, tmp);
+ return -1;
+ }
+
+ rcv_len = tmp & DTLN;
+ dev->act_len += rcv_len;
+
+ r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
+
+ if (buffer) {
+ if (rcv_len == 0)
+ r8a66597_write(r8a66597, BCLR, DCPCTR);
+ else
+ r8a66597_read_fifo(r8a66597, CFIFO, buffer, rcv_len);
+ }
+
+ return 0;
+}
+
+static int send_status_packet(struct r8a66597 *r8a66597,
+ unsigned long pipe)
+{
+ r8a66597_bset(r8a66597, SQSET, DCPCTR);
+ r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
+
+ if (usb_pipein(pipe)) {
+ r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
+ r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+ r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+ r8a66597_write(r8a66597, BCLR | BVAL, CFIFOCTR);
+ } else {
+ r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+ r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+ r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+ r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+ }
+ r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
+
+ while (!(r8a66597_read(r8a66597, BEMPSTS) & 0x0001))
+ if (ctrlc())
+ return -1;
+
+ return 0;
+}
+
+static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port)
+{
+ int count = R8A66597_MAX_SAMPLING;
+ unsigned short syssts, old_syssts;
+
+ R8A66597_DPRINT("%s\n", __func__);
+
+ old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
+ while (count > 0) {
+ wait_ms(R8A66597_RH_POLL_TIME);
+
+ syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
+ if (syssts == old_syssts) {
+ count--;
+ } else {
+ count = R8A66597_MAX_SAMPLING;
+ old_syssts = syssts;
+ }
+ }
+}
+
+static void r8a66597_bus_reset(struct r8a66597 *r8a66597, int port)
+{
+ wait_ms(10);
+ r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT, get_dvstctr_reg(port));
+ wait_ms(50);
+ r8a66597_mdfy(r8a66597, UACT, USBRST | UACT, get_dvstctr_reg(port));
+ wait_ms(50);
+}
+
+static int check_usb_device_connecting(struct r8a66597 *r8a66597)
+{
+ int timeout = 10000; /* 100usec * 10000 = 1sec */
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ /* check a usb cable connect */
+ while (!(r8a66597_read(r8a66597, INTSTS1) & ATTCH)) {
+ if (timeout-- < 0) {
+ printf("%s timeout.\n", __func__);
+ return -1;
+ }
+ udelay(100);
+ }
+
+ /* check a data line */
+ r8a66597_check_syssts(r8a66597, 0);
+
+ r8a66597_bus_reset(r8a66597, 0);
+ r8a66597->speed = get_rh_usb_speed(r8a66597, 0);
+
+ if (!(r8a66597_read(r8a66597, INTSTS1) & DTCH)) {
+ r8a66597->port_change = USB_PORT_STAT_C_CONNECTION;
+ r8a66597->port_status = USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_ENABLE;
+ return 0; /* success */
+ }
+
+ R8A66597_DPRINT("USB device has detached. retry = %d\n", i);
+ r8a66597_write(r8a66597, ~DTCH, INTSTS1);
+ }
+
+ return -1; /* fail */
+}
+
+/* based on usb_ohci.c */
+#define min_t(type, x, y) \
+ ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes; */
+
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 34, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '8', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'A', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '6', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '6', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '5', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '9', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '7', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ struct r8a66597 *r8a66597 = &gr8a66597;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+ unsigned char data[32];
+
+ R8A66597_DPRINT("%s\n", __func__);
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ printf("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = cpu_to_le16 (cmd->value);
+ wIndex = cpu_to_le16 (cmd->index);
+ wLength = cpu_to_le16 (cmd->length);
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ *(__u16 *)buffer = cpu_to_le16(1);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *)buffer = cpu_to_le16(0);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *)buffer = cpu_to_le16(0);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *)buffer = cpu_to_le32(0);
+ len = 4;
+ break;
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *)buffer = cpu_to_le32(r8a66597->port_status |
+ (r8a66597->port_change << 16));
+ len = 4;
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case RH_C_PORT_CONNECTION:
+ r8a66597->port_change &= ~USB_PORT_STAT_C_CONNECTION;
+ break;
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ break;
+ case (RH_PORT_RESET):
+ r8a66597_bus_reset(r8a66597, 0);
+ break;
+ case (RH_PORT_POWER):
+ break;
+ case (RH_PORT_ENABLE):
+ break;
+ }
+ break;
+ case RH_SET_ADDRESS:
+ gr8a66597.rh_devnum = wValue;
+ break;
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ memcpy(buffer, root_hub_dev_des, len);
+ break;
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ memcpy(buffer, root_hub_config_des, len);
+ break;
+ case (0x03): /* string descriptors */
+ if (wValue == 0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ memcpy(buffer, root_hub_str_index0, len);
+ }
+ if (wValue == 0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ memcpy(buffer, root_hub_str_index1, len);
+ }
+ break;
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = 0x00000001;
+
+ data[0] = 9; /* min length; */
+ data[1] = 0x29;
+ data[2] = temp & RH_A_NDP;
+ data[3] = 0;
+ if (temp & RH_A_PSM)
+ data[3] |= 0x1;
+ if (temp & RH_A_NOCP)
+ data[3] |= 0x10;
+ else if (temp & RH_A_OCPM)
+ data[3] |= 0x8;
+
+ /* corresponds to data[4-7] */
+ data[5] = (temp & RH_A_POTPGT) >> 24;
+ data[7] = temp & RH_B_DR;
+ if (data[2] < 7) {
+ data[8] = 0xff;
+ } else {
+ data[0] += 2;
+ data[8] = (temp & RH_B_DR) >> 8;
+ data[10] = data[9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data[0], wLength));
+ memcpy(buffer, data, len);
+ break;
+ }
+
+ case RH_GET_CONFIGURATION:
+ *(__u8 *) buffer = 0x01;
+ len = 1;
+ break;
+ case RH_SET_CONFIGURATION:
+ break;
+ default:
+ dbg("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+ wait_ms(1);
+
+ len = min_t(int, len, leni);
+
+ dev->act_len = len;
+ dev->status = stat;
+
+ return stat;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ struct r8a66597 *r8a66597 = &gr8a66597;
+ int ret = 0;
+
+ R8A66597_DPRINT("%s\n", __func__);
+ R8A66597_DPRINT("pipe = %08x, buffer = %p, len = %d, devnum = %d\n",
+ pipe, buffer, transfer_len, dev->devnum);
+
+ set_devadd_reg(r8a66597, dev->devnum, r8a66597->speed, 0, 0, 0);
+
+ pipe_buffer_setting(r8a66597, dev, pipe);
+
+ dev->act_len = 0;
+ while (dev->act_len < transfer_len && ret == 0) {
+ if (ctrlc())
+ return -1;
+
+ if (usb_pipein(pipe))
+ ret = receive_bulk_packet(r8a66597, dev, pipe, buffer,
+ transfer_len);
+ else
+ ret = send_bulk_packet(r8a66597, dev, pipe, buffer,
+ transfer_len);
+ }
+
+ if (ret == 0)
+ dev->status = 0;
+
+ return ret;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *setup)
+{
+ struct r8a66597 *r8a66597 = &gr8a66597;
+ u16 r8a66597_address = setup->request == USB_REQ_SET_ADDRESS ?
+ 0 : dev->devnum;
+
+ R8A66597_DPRINT("%s\n", __func__);
+ if (usb_pipedevice(pipe) == r8a66597->rh_devnum)
+ return r8a66597_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+
+ R8A66597_DPRINT("%s: setup\n", __func__);
+ set_devadd_reg(r8a66597, r8a66597_address, r8a66597->speed, 0, 0, 0);
+
+ if (send_setup_packet(r8a66597, dev, setup) < 0) {
+ printf("setup packet send error\n");
+ return -1;
+ }
+
+ if (usb_pipein(pipe))
+ if (receive_control_packet(r8a66597, dev, buffer,
+ transfer_len) < 0)
+ return -1;
+
+ if (send_status_packet(r8a66597, pipe) < 0)
+ return -1;
+
+ dev->status = 0;
+
+ return 0;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ /* no implement */
+ R8A66597_DPRINT("%s\n", __func__);
+ return 0;
+}
+
+void usb_event_poll(void)
+{
+ /* no implement */
+ R8A66597_DPRINT("%s\n", __func__);
+}
+
+int usb_lowlevel_init(void)
+{
+ struct r8a66597 *r8a66597 = &gr8a66597;
+
+ R8A66597_DPRINT("%s\n", __func__);
+
+ memset(r8a66597, 0, sizeof(r8a66597));
+ r8a66597->reg = CONFIG_R8A66597_BASE_ADDR;
+
+ disable_controller(r8a66597);
+ wait_ms(100);
+
+ enable_controller(r8a66597);
+ r8a66597_port_power(r8a66597, 0 , 1);
+
+ /* check usb device */
+ check_usb_device_connecting(r8a66597);
+
+ wait_ms(50);
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ disable_controller(&gr8a66597);
+
+ return 0;
+}
+
+#endif /* CONFIG_USB_R8A66597_HCD */
+
diff --git a/drivers/usb/r8a66597.h b/drivers/usb/r8a66597.h
new file mode 100644
index 0000000..54a1f26
--- /dev/null
+++ b/drivers/usb/r8a66597.h
@@ -0,0 +1,663 @@
+/*
+ * R8A66597 HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#define SYSCFG0 0x00
+#define SYSCFG1 0x02
+#define SYSSTS0 0x04
+#define SYSSTS1 0x06
+#define DVSTCTR0 0x08
+#define DVSTCTR1 0x0A
+#define TESTMODE 0x0C
+#define PINCFG 0x0E
+#define DMA0CFG 0x10
+#define DMA1CFG 0x12
+#define CFIFO 0x14
+#define D0FIFO 0x18
+#define D1FIFO 0x1C
+#define CFIFOSEL 0x20
+#define CFIFOCTR 0x22
+#define CFIFOSIE 0x24
+#define D0FIFOSEL 0x28
+#define D0FIFOCTR 0x2A
+#define D1FIFOSEL 0x2C
+#define D1FIFOCTR 0x2E
+#define INTENB0 0x30
+#define INTENB1 0x32
+#define INTENB2 0x34
+#define BRDYENB 0x36
+#define NRDYENB 0x38
+#define BEMPENB 0x3A
+#define SOFCFG 0x3C
+#define INTSTS0 0x40
+#define INTSTS1 0x42
+#define INTSTS2 0x44
+#define BRDYSTS 0x46
+#define NRDYSTS 0x48
+#define BEMPSTS 0x4A
+#define FRMNUM 0x4C
+#define UFRMNUM 0x4E
+#define USBADDR 0x50
+#define USBREQ 0x54
+#define USBVAL 0x56
+#define USBINDX 0x58
+#define USBLENG 0x5A
+#define DCPCFG 0x5C
+#define DCPMAXP 0x5E
+#define DCPCTR 0x60
+#define PIPESEL 0x64
+#define PIPECFG 0x68
+#define PIPEBUF 0x6A
+#define PIPEMAXP 0x6C
+#define PIPEPERI 0x6E
+#define PIPE1CTR 0x70
+#define PIPE2CTR 0x72
+#define PIPE3CTR 0x74
+#define PIPE4CTR 0x76
+#define PIPE5CTR 0x78
+#define PIPE6CTR 0x7A
+#define PIPE7CTR 0x7C
+#define PIPE8CTR 0x7E
+#define PIPE9CTR 0x80
+#define PIPE1TRE 0x90
+#define PIPE1TRN 0x92
+#define PIPE2TRE 0x94
+#define PIPE2TRN 0x96
+#define PIPE3TRE 0x98
+#define PIPE3TRN 0x9A
+#define PIPE4TRE 0x9C
+#define PIPE4TRN 0x9E
+#define PIPE5TRE 0xA0
+#define PIPE5TRN 0xA2
+#define DEVADD0 0xD0
+#define DEVADD1 0xD2
+#define DEVADD2 0xD4
+#define DEVADD3 0xD6
+#define DEVADD4 0xD8
+#define DEVADD5 0xDA
+#define DEVADD6 0xDC
+#define DEVADD7 0xDE
+#define DEVADD8 0xE0
+#define DEVADD9 0xE2
+#define DEVADDA 0xE4
+
+/* System Configuration Control Register */
+#define XTAL 0xC000 /* b15-14: Crystal selection */
+#define XTAL48 0x8000 /* 48MHz */
+#define XTAL24 0x4000 /* 24MHz */
+#define XTAL12 0x0000 /* 12MHz */
+#define XCKE 0x2000 /* b13: External clock enable */
+#define PLLC 0x0800 /* b11: PLL control */
+#define SCKE 0x0400 /* b10: USB clock enable */
+#define PCSDIS 0x0200 /* b9: not CS wakeup */
+#define LPSME 0x0100 /* b8: Low power sleep mode */
+#define HSE 0x0080 /* b7: Hi-speed enable */
+#define DCFM 0x0040 /* b6: Controller function select */
+#define DRPD 0x0020 /* b5: D+/- pull down control */
+#define DPRPU 0x0010 /* b4: D+ pull up control */
+#define USBE 0x0001 /* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define OVCBIT 0x8000 /* b15-14: Over-current bit */
+#define OVCMON 0xC000 /* b15-14: Over-current monitor */
+#define SOFEA 0x0020 /* b5: SOF monitor */
+#define IDMON 0x0004 /* b3: ID-pin monitor */
+#define LNST 0x0003 /* b1-0: D+, D- line status */
+#define SE1 0x0003 /* SE1 */
+#define FS_KSTS 0x0002 /* Full-Speed K State */
+#define FS_JSTS 0x0001 /* Full-Speed J State */
+#define LS_JSTS 0x0002 /* Low-Speed J State */
+#define LS_KSTS 0x0001 /* Low-Speed K State */
+#define SE0 0x0000 /* SE0 */
+
+/* Device State Control Register */
+#define EXTLP0 0x0400 /* b10: External port */
+#define VBOUT 0x0200 /* b9: VBUS output */
+#define WKUP 0x0100 /* b8: Remote wakeup */
+#define RWUPE 0x0080 /* b7: Remote wakeup sense */
+#define USBRST 0x0040 /* b6: USB reset enable */
+#define RESUME 0x0020 /* b5: Resume enable */
+#define UACT 0x0010 /* b4: USB bus enable */
+#define RHST 0x0007 /* b1-0: Reset handshake status */
+#define HSPROC 0x0004 /* HS handshake is processing */
+#define HSMODE 0x0003 /* Hi-Speed mode */
+#define FSMODE 0x0002 /* Full-Speed mode */
+#define LSMODE 0x0001 /* Low-Speed mode */
+#define UNDECID 0x0000 /* Undecided */
+
+/* Test Mode Register */
+#define UTST 0x000F /* b3-0: Test select */
+#define H_TST_PACKET 0x000C /* HOST TEST Packet */
+#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
+#define H_TST_K 0x000A /* HOST TEST K */
+#define H_TST_J 0x0009 /* HOST TEST J */
+#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
+#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
+#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
+#define P_TST_K 0x0002 /* PERI TEST K */
+#define P_TST_J 0x0001 /* PERI TEST J */
+#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define LDRV 0x8000 /* b15: Drive Current Adjust */
+#define VIF1 0x0000 /* VIF = 1.8V */
+#define VIF3 0x8000 /* VIF = 3.3V */
+#define INTA 0x0001 /* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define DREQA 0x4000 /* b14: Dreq active select */
+#define BURST 0x2000 /* b13: Burst mode */
+#define DACKA 0x0400 /* b10: Dack active select */
+#define DFORM 0x0380 /* b9-7: DMA mode select */
+#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
+#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
+#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
+#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
+#define DENDA 0x0040 /* b6: Dend active select */
+#define PKTM 0x0020 /* b5: Packet mode */
+#define DENDE 0x0010 /* b4: Dend enable */
+#define OBUS 0x0004 /* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define RCNT 0x8000 /* b15: Read count mode */
+#define REW 0x4000 /* b14: Buffer rewind */
+#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
+#define DREQE 0x1000 /* b12: DREQ output enable */
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#define MBW 0x0800
+#else
+#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */
+#endif
+#define MBW_8 0x0000 /* 8bit */
+#define MBW_16 0x0400 /* 16bit */
+#define BIGEND 0x0100 /* b8: Big endian mode */
+#define BYTE_LITTLE 0x0000 /* little dendian */
+#define BYTE_BIG 0x0100 /* big endifan */
+#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
+#define CURPIPE 0x000F /* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define BVAL 0x8000 /* b15: Buffer valid flag */
+#define BCLR 0x4000 /* b14: Buffer clear */
+#define FRDY 0x2000 /* b13: FIFO ready */
+#define DTLN 0x0FFF /* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define VBSE 0x8000 /* b15: VBUS interrupt */
+#define RSME 0x4000 /* b14: Resume interrupt */
+#define SOFE 0x2000 /* b13: Frame update interrupt */
+#define DVSE 0x1000 /* b12: Device state transition interrupt */
+#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
+#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define OVRCRE 0x8000 /* b15: Over-current interrupt */
+#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
+#define DTCHE 0x1000 /* b12: Detach sense interrupt */
+#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
+#define EOFERRE 0x0040 /* b6: EOF error interrupt */
+#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
+#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define BRDY9 0x0200 /* b9: PIPE9 */
+#define BRDY8 0x0100 /* b8: PIPE8 */
+#define BRDY7 0x0080 /* b7: PIPE7 */
+#define BRDY6 0x0040 /* b6: PIPE6 */
+#define BRDY5 0x0020 /* b5: PIPE5 */
+#define BRDY4 0x0010 /* b4: PIPE4 */
+#define BRDY3 0x0008 /* b3: PIPE3 */
+#define BRDY2 0x0004 /* b2: PIPE2 */
+#define BRDY1 0x0002 /* b1: PIPE1 */
+#define BRDY0 0x0001 /* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define NRDY9 0x0200 /* b9: PIPE9 */
+#define NRDY8 0x0100 /* b8: PIPE8 */
+#define NRDY7 0x0080 /* b7: PIPE7 */
+#define NRDY6 0x0040 /* b6: PIPE6 */
+#define NRDY5 0x0020 /* b5: PIPE5 */
+#define NRDY4 0x0010 /* b4: PIPE4 */
+#define NRDY3 0x0008 /* b3: PIPE3 */
+#define NRDY2 0x0004 /* b2: PIPE2 */
+#define NRDY1 0x0002 /* b1: PIPE1 */
+#define NRDY0 0x0001 /* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define BEMP9 0x0200 /* b9: PIPE9 */
+#define BEMP8 0x0100 /* b8: PIPE8 */
+#define BEMP7 0x0080 /* b7: PIPE7 */
+#define BEMP6 0x0040 /* b6: PIPE6 */
+#define BEMP5 0x0020 /* b5: PIPE5 */
+#define BEMP4 0x0010 /* b4: PIPE4 */
+#define BEMP3 0x0008 /* b3: PIPE3 */
+#define BEMP2 0x0004 /* b2: PIPE2 */
+#define BEMP1 0x0002 /* b1: PIPE1 */
+#define BEMP0 0x0001 /* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
+#define BRDYM 0x0040 /* b6: BRDY clear timing */
+#define INTL 0x0020 /* b5: Interrupt sense select */
+#define EDGESTS 0x0010 /* b4: */
+#define SOFMODE 0x000C /* b3-2: SOF pin select */
+#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
+#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
+#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define VBINT 0x8000 /* b15: VBUS interrupt */
+#define RESM 0x4000 /* b14: Resume interrupt */
+#define SOFR 0x2000 /* b13: SOF frame update interrupt */
+#define DVST 0x1000 /* b12: Device state transition interrupt */
+#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMP 0x0400 /* b10: Buffer empty interrupt */
+#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDY 0x0100 /* b8: Buffer ready interrupt */
+#define VBSTS 0x0080 /* b7: VBUS input port */
+#define DVSQ 0x0070 /* b6-4: Device state */
+#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
+#define DS_SPD_ADDR 0x0060 /* Suspend Address */
+#define DS_SPD_DFLT 0x0050 /* Suspend Default */
+#define DS_SPD_POWR 0x0040 /* Suspend Powered */
+#define DS_SUSP 0x0040 /* Suspend */
+#define DS_CNFG 0x0030 /* Configured */
+#define DS_ADDS 0x0020 /* Address */
+#define DS_DFLT 0x0010 /* Default */
+#define DS_POWR 0x0000 /* Powered */
+#define DVSQS 0x0030 /* b5-4: Device state */
+#define VALID 0x0008 /* b3: Setup packet detected flag */
+#define CTSQ 0x0007 /* b2-0: Control transfer stage */
+#define CS_SQER 0x0006 /* Sequence error */
+#define CS_WRND 0x0005 /* Control write nodata status stage */
+#define CS_WRSS 0x0004 /* Control write status stage */
+#define CS_WRDS 0x0003 /* Control write data stage */
+#define CS_RDSS 0x0002 /* Control read status stage */
+#define CS_RDDS 0x0001 /* Control read data stage */
+#define CS_IDST 0x0000 /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define OVRCR 0x8000 /* b15: Over-current interrupt */
+#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
+#define DTCH 0x1000 /* b12: Detach sense interrupt */
+#define ATTCH 0x0800 /* b11: Attach sense interrupt */
+#define EOFERR 0x0040 /* b6: EOF-error interrupt */
+#define SIGN 0x0020 /* b5: Setup ignore interrupt */
+#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define OVRN 0x8000 /* b15: Overrun error */
+#define CRCE 0x4000 /* b14: Received data error */
+#define FRNM 0x07FF /* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define UFRNM 0x0007 /* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define DEVSEL 0xF000 /* b15-14: Device address select */
+#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define SUREQ 0x4000 /* b14: Send USB request */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define SUREQCLR 0x0800 /* b11: stop setup request */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PINGE 0x0010 /* b4: ping enable */
+#define CCPL 0x0004 /* b2: Enable control transfer complete */
+#define PID 0x0003 /* b1-0: Response PID */
+#define PID_STALL11 0x0003 /* STALL */
+#define PID_STALL 0x0002 /* STALL */
+#define PID_BUF 0x0001 /* BUF */
+#define PID_NAK 0x0000 /* NAK */
+
+/* Pipe Window Select Register */
+#define PIPENM 0x0007 /* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
+#define R8A66597_ISO 0xC000 /* Isochronous */
+#define R8A66597_INT 0x8000 /* Interrupt */
+#define R8A66597_BULK 0x4000 /* Bulk */
+#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
+#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
+#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
+#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
+#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
+#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
+#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
+#define PIPE0BUF 256
+#define PIPExBUF 64
+
+/* Pipe Maxpacket Size Register */
+#define MXPS 0x07FF /* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
+#define IITV 0x0007 /* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define ATREPM 0x0400 /* b10: Auto repeat mode */
+#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PID 0x0003 /* b1-0: Response PID */
+
+/* PIPExTRE */
+#define TRENB 0x0200 /* b9: Transaction counter enable */
+#define TRCLR 0x0100 /* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define UPPHUB 0x7800
+#define HUBPORT 0x0700
+#define USBSPD 0x00C0
+#define RTPORT 0x0001
+
+#define R8A66597_MAX_NUM_PIPE 10
+#define R8A66597_BUF_BSIZE 8
+#define R8A66597_MAX_DEVICE 10
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#define R8A66597_MAX_ROOT_HUB 1
+#else
+#define R8A66597_MAX_ROOT_HUB 2
+#endif
+#define R8A66597_MAX_SAMPLING 5
+#define R8A66597_RH_POLL_TIME 10
+
+#define BULK_IN_PIPENUM 3
+#define BULK_IN_BUFNUM 8
+
+#define BULK_OUT_PIPENUM 4
+#define BULK_OUT_BUFNUM 40
+
+#define check_bulk_or_isoc(pipenum) ((pipenum >= 1 && pipenum <= 5))
+#define check_interrupt(pipenum) ((pipenum >= 6 && pipenum <= 9))
+#define make_devsel(addr) (addr << 12)
+
+struct r8a66597 {
+ unsigned long reg;
+ unsigned short pipe_config; /* bit field */
+ unsigned short port_status;
+ unsigned short port_change;
+ u16 speed; /* HSMODE or FSMODE or LSMODE */
+ unsigned char rh_devnum;
+};
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+ return inw(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+ unsigned long offset, void *buf,
+ int len)
+{
+ int i;
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+ unsigned long fifoaddr = r8a66597->reg + offset;
+ unsigned long count;
+ unsigned long *p = buf;
+
+ count = len / 4;
+ for (i = 0; i < count; i++)
+ inl(p[i], r8a66597->reg + offset);
+
+ if (len & 0x00000003) {
+ unsigned long tmp = inl(fifoaddr);
+ memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+ }
+#else
+ unsigned short *p = buf;
+
+ len = (len + 1) / 2;
+ for (i = 0; i < len; i++)
+ p[i] = inw(r8a66597->reg + offset);
+#endif
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+ unsigned long offset)
+{
+ outw(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+ unsigned long offset, void *buf,
+ int len)
+{
+ int i;
+ unsigned long fifoaddr = r8a66597->reg + offset;
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+ unsigned long count;
+ unsigned char *pb;
+ unsigned long *p = buf;
+
+ count = len / 4;
+ for (i = 0; i < count; i++)
+ outl(p[i], fifoaddr);
+
+ if (len & 0x00000003) {
+ pb = (unsigned char *)buf + count * 4;
+ for (i = 0; i < (len & 0x00000003); i++) {
+ if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+ outb(pb[i], fifoaddr + i);
+ else
+ outb(pb[i], fifoaddr + 3 - i);
+ }
+ }
+#else
+ int odd = len & 0x0001;
+ unsigned short *p = buf;
+
+ len = len / 2;
+ for (i = 0; i < len; i++)
+ outw(p[i], fifoaddr);
+
+ if (odd) {
+ unsigned char *pb = (unsigned char *)(buf + len);
+ outb(*pb, fifoaddr);
+ }
+#endif
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+ u16 val, u16 pat, unsigned long offset)
+{
+ u16 tmp;
+ tmp = r8a66597_read(r8a66597, offset);
+ tmp = tmp & (~pat);
+ tmp = tmp | val;
+ r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset) \
+ r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset) \
+ r8a66597_mdfy(r8a66597, val, 0, offset)
+
+static inline unsigned long get_syscfg_reg(int port)
+{
+ return port == 0 ? SYSCFG0 : SYSCFG1;
+}
+
+static inline unsigned long get_syssts_reg(int port)
+{
+ return port == 0 ? SYSSTS0 : SYSSTS1;
+}
+
+static inline unsigned long get_dvstctr_reg(int port)
+{
+ return port == 0 ? DVSTCTR0 : DVSTCTR1;
+}
+
+static inline unsigned long get_dmacfg_reg(int port)
+{
+ return port == 0 ? DMA0CFG : DMA1CFG;
+}
+
+static inline unsigned long get_intenb_reg(int port)
+{
+ return port == 0 ? INTENB1 : INTENB2;
+}
+
+static inline unsigned long get_intsts_reg(int port)
+{
+ return port == 0 ? INTSTS1 : INTSTS2;
+}
+
+static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port)
+{
+ unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+ return r8a66597_read(r8a66597, dvstctr_reg) & RHST;
+}
+
+static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
+ int power)
+{
+ unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+ if (power)
+ r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+ else
+ r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+}
+
+#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4)
+#define get_devadd_addr(address) (DEVADD0 + address * 2)
+
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h, based on usb_ohci.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+
+#endif /* __R8A66597_H__ */
+
diff --git a/drivers/usb/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c
index 84bb936..4e3239f 100644
--- a/drivers/usb/usbdcore_omap1510.c
+++ b/drivers/usb/usbdcore_omap1510.c
@@ -28,7 +28,7 @@
#include <common.h>
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if ((defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)) && defined(CONFIG_USB_DEVICE))
#include <asm/io.h>
#ifdef CONFIG_OMAP_SX1
@@ -1109,21 +1109,43 @@
*/
outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
UDCREG (CLOCK_CTRL);
+
+#ifdef CONFIG_OMAP1510
+ /* This code was originally implemented for OMAP1510 and
+ * therefore is only applicable for OMAP1510 boards. For
+ * OMAP5912 or OMAP16xx the register APLL_CTRL does not
+ * exist and DPLL_CTRL is already configured.
+ */
+
/* Set and check APLL */
outw (0x0008, APLL_CTRL);
UDCREG (APLL_CTRL);
/* Set and check DPLL */
outw (0x2210, DPLL_CTRL);
UDCREG (DPLL_CTRL);
- /* Set and check SOFT */
- outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
+#endif
+ /* Set and check SOFT
+ * The below line of code has been changed to perform a
+ * read-modify-write instead of a simple write for
+ * configuring the SOFT_REQ register. This allows the code
+ * to be compatible with OMAP5912 and OMAP16xx devices
+ */
+ outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ);
+
/* Short delay to wait for DPLL */
udelay (1000);
/* Print banner with device revision */
udc_rev = inw (UDC_REV) & 0xff;
+#ifdef CONFIG_OMAP1510
printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
udc_rev >> 4, udc_rev & 0xf);
+#endif
+
+#ifdef CONFIG_OMAP1610
+ printf ("USB: TI OMAP5912 USB function module rev %d.%d\n",
+ udc_rev >> 4, udc_rev & 0xf);
+#endif
#ifdef CONFIG_OMAP_SX1
i2c_read (0x32, 0x04, 1, &value, 1);
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index e4b68ab..66db296 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/fps850L/uImage\0" \
+ "hostname=FPS850L\0" \
+ "bootfile=FPS850L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=FPS850L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -106,10 +113,14 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -180,11 +191,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
@@ -194,6 +209,20 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
/*-----------------------------------------------------------------------
* Hardware Information Block
*/
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index ed612c3..84607cc 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/fps850L/uImage\0" \
+ "hostname=FPS860L\0" \
+ "bootfile=FPS860L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=FPS860L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -106,10 +113,14 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -180,11 +191,15 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
@@ -194,6 +209,20 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
/*-----------------------------------------------------------------------
* Hardware Information Block
*/
@@ -306,9 +335,11 @@
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
- OR_SCY_5_CLK | OR_EHTR)
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
@@ -337,12 +368,42 @@
/*
* Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock!)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096 Rows from SDRAM example configuration
+ * 1000 factor s -> ms
+ * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4 Number of refresh cycles per period
+ * 64 Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider = 98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
*/
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
+#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
+#define CFG_MAMR_PTA 98
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
+ * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
@@ -372,4 +433,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_SCC1_ENET
+
#endif /* __CONFIG_H */
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 11e5c63..21d90c3 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -67,9 +67,16 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/NSCU/uImage\0" \
+ "hostname=NSCU\0" \
+ "bootfile=${hostname}/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
+ "u-boot=${hostname}/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -110,20 +117,24 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if 0
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history
+*/
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
-#endif
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
@@ -186,21 +197,26 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
-#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
+
/*-----------------------------------------------------------------------
* Hardware Information Block
*/
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 100be7c..f807271 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -37,6 +37,8 @@
#define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */
#ifdef CONFIG_LCD /* with LCD controller ? */
+#define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */
+#define CONFIG_LCD_INFO 1 /* ... and some board info */
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
#endif
@@ -69,10 +71,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM823L/uImage\0" \
+ "hostname=TQM823L\0" \
+ "bootfile=TQM823L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=TQM823L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -113,7 +122,9 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
@@ -122,6 +133,8 @@
#endif
+#define CONFIG_NETCONSOLE
+
/*
* Miscellaneous configurable options
*/
@@ -196,7 +209,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -213,6 +226,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 40dc26b..431ae8c 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -69,10 +69,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM823M/uImage\0" \
+ "hostname=TQM823M\0" \
+ "bootfile=TQM823M/uImage\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM823M/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -113,11 +120,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -210,6 +222,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 3097bc3..7946c13 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM850L/uImage\0" \
+ "hostname=TQM850L\0" \
+ "bootfile=TQM850L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=TQM850L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -104,11 +111,15 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
/*
* Miscellaneous configurable options
*/
@@ -183,7 +194,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -200,6 +211,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index becf82c..777776d 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -63,10 +63,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM850M/uImage\0" \
+ "hostname=TQM850M\0" \
+ "bootfile=TQM850M/uImage\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM850M/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -102,11 +109,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -199,6 +211,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 8ca8906..0549cbd 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM855L/uImage\0" \
+ "hostname=TQM855L\0" \
+ "bootfile=TQM855L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=TQM855L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -108,11 +115,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -187,7 +199,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -204,6 +216,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 2696ea5..bc092b7 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM855M/uImage\0" \
+ "hostname=TQM855M\0" \
+ "bootfile=TQM855M/uImage\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM855M/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -141,12 +148,17 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -239,6 +251,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index f66aace..065156f 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860L/uImage\0" \
+ "hostname=TQM860L\0" \
+ "bootfile=TQM860L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=TQM860L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -110,6 +117,7 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
@@ -190,7 +198,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -207,6 +215,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 00b7853..ff610bf 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -68,15 +68,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860M/uImage\0" \
+ "hostname=TQM860M\0" \
+ "bootfile=TQM860M/uImage\0" \
"fdt_addr=400C0000\0" \
"kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM860M/u-image.bin\0" \
"load=tftp 200000 ${u-boot}\0" \
- "update=protect off 40000000 +${filesize};" \
- "erase 40000000 +${filesize};" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
"cp.b 200000 40000000 ${filesize};" \
- "protect on 40000000 +${filesize}\0" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -115,10 +117,14 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -210,6 +216,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 7813a20..33ff8a9 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -71,10 +71,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM862L/uImage\0" \
+ "hostname=TQM862L\0" \
+ "bootfile=TQM862L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
+ "u-boot=TQM862L/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -111,11 +118,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -190,7 +202,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -207,6 +219,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 05395e0..1ec4431 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -71,10 +71,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM862M/uImage\0" \
+ "hostname=TQM862M\0" \
+ "bootfile=TQM862M/uImage\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM862M/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -111,11 +118,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -208,6 +220,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index d033875..0cee9f4 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -80,15 +80,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM866M/uImage\0" \
+ "hostname=TQM866M\0" \
+ "bootfile=TQM866M/uImage\0" \
"fdt_addr=400C0000\0" \
"kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \
+ "u-boot=TQM866M/u-image.bin\0" \
"load=tftp 200000 ${u-boot}\0" \
- "update=protect off 40000000 +${filesize};" \
- "erase 40000000 +${filesize};" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
"cp.b 200000 40000000 ${filesize};" \
- "protect on 40000000 +${filesize}\0" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -157,11 +159,16 @@
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_NETCONSOLE
+
+
/*
* Miscellaneous configurable options
*/
@@ -253,6 +260,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
+ "128k(dtb)," \
+ "1920k(kernel)," \
+ "5632(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index f104e68..091da80 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -308,6 +308,7 @@
#define CONFIG_PHY_ADDR 0x1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_FEC_AN_TIMEOUT 1
+#define CONFIG_HAS_ETH0
/*
* Configure on-board RTC
@@ -478,10 +479,10 @@
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1
#define OF_CPU "PowerPC,5121@0"
-#define OF_SOC "soc@80000000"
-#define OF_SOC_OLD "soc5121@80000000"
+#define OF_SOC_COMPAT "fsl,mpc5121-immr"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc@80000000/serial@11300"
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 6bb075d..54d9421 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -37,10 +37,6 @@
#define CONFIG_VIRTLAB2 1 /* ...on a virtlab2 module */
#define CONFIG_TQM8xxL 1
-#ifdef CONFIG_LCD /* with LCD controller ? */
-#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
-#endif
-
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
@@ -70,9 +66,17 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM823L/uImage\0" \
- "kernel_addr=40040000\0" \
- "ramdisk_addr=40100000\0" \
+ "hostname=virtlab2\0" \
+ "bootfile=virtlab2/uImage\0" \
+ "fdt_addr=40040000\0" \
+ "kernel_addr=40060000\0" \
+ "ramdisk_addr=40200000\0" \
+ "u-boot=virtlab2/u-image.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=prot off 40000000 +${filesize};" \
+ "era 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "sete filesize;save\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -114,6 +118,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
@@ -122,15 +127,16 @@
#endif
+#define CONFIG_NETCONSOLE
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if 0
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
-#endif
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
@@ -197,7 +203,7 @@
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -214,6 +220,18 @@
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \
+ "128k(dtb)," \
+ "1664k(kernel)," \
+ "2m(rootfs)," \
+ "4m(data)"
+
+/*-----------------------------------------------------------------------
* Hardware Information Block
*/
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
diff --git a/include/mpc512x.h b/include/mpc512x.h
index b4cc2b9..a76b1ca 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -347,41 +347,226 @@
/* IO Control Register
*/
+#define IOCTL_MEM 0x000
+#define IOCTL_GP 0x004
+#define IOCTL_LPC_CLK 0x008
+#define IOCTL_LPC_OE 0x00C
+#define IOCTL_LPC_RWB 0x010
+#define IOCTL_LPC_ACK 0x014
+#define IOCTL_LPC_CS0 0x018
+#define IOCTL_NFC_CE0 0x01C
+#define IOCTL_LPC_CS1 0x020
+#define IOCTL_LPC_CS2 0x024
+#define IOCTL_LPC_AX03 0x028
+#define IOCTL_EMB_AX02 0x02C
+#define IOCTL_EMB_AX01 0x030
+#define IOCTL_EMB_AX00 0x034
+#define IOCTL_EMB_AD31 0x038
+#define IOCTL_EMB_AD30 0x03C
+#define IOCTL_EMB_AD29 0x040
+#define IOCTL_EMB_AD28 0x044
+#define IOCTL_EMB_AD27 0x048
+#define IOCTL_EMB_AD26 0x04C
+#define IOCTL_EMB_AD25 0x050
+#define IOCTL_EMB_AD24 0x054
+#define IOCTL_EMB_AD23 0x058
+#define IOCTL_EMB_AD22 0x05C
+#define IOCTL_EMB_AD21 0x060
+#define IOCTL_EMB_AD20 0x064
+#define IOCTL_EMB_AD19 0x068
+#define IOCTL_EMB_AD18 0x06C
+#define IOCTL_EMB_AD17 0x070
+#define IOCTL_EMB_AD16 0x074
+#define IOCTL_EMB_AD15 0x078
+#define IOCTL_EMB_AD14 0x07C
+#define IOCTL_EMB_AD13 0x080
+#define IOCTL_EMB_AD12 0x084
+#define IOCTL_EMB_AD11 0x088
+#define IOCTL_EMB_AD10 0x08C
+#define IOCTL_EMB_AD09 0x090
+#define IOCTL_EMB_AD08 0x094
+#define IOCTL_EMB_AD07 0x098
+#define IOCTL_EMB_AD06 0x09C
+#define IOCTL_EMB_AD05 0x0A0
+#define IOCTL_EMB_AD04 0x0A4
+#define IOCTL_EMB_AD03 0x0A8
+#define IOCTL_EMB_AD02 0x0AC
+#define IOCTL_EMB_AD01 0x0B0
+#define IOCTL_EMB_AD00 0x0B4
+#define IOCTL_PATA_CE1 0x0B8
+#define IOCTL_PATA_CE2 0x0BC
+#define IOCTL_PATA_ISOLATE 0x0C0
+#define IOCTL_PATA_IOR 0x0C4
+#define IOCTL_PATA_IOW 0x0C8
+#define IOCTL_PATA_IOCHRDY 0x0CC
+#define IOCTL_PATA_INTRQ 0x0D0
+#define IOCTL_PATA_DRQ 0x0D4
+#define IOCTL_PATA_DACK 0x0D8
+#define IOCTL_NFC_WP 0x0DC
+#define IOCTL_NFC_RB 0x0E0
+#define IOCTL_NFC_ALE 0x0E4
+#define IOCTL_NFC_CLE 0x0E8
+#define IOCTL_NFC_WE 0x0EC
+#define IOCTL_NFC_RE 0x0F0
+#define IOCTL_PCI_AD31 0x0F4
+#define IOCTL_PCI_AD30 0x0F8
+#define IOCTL_PCI_AD29 0x0FC
+#define IOCTL_PCI_AD28 0x100
+#define IOCTL_PCI_AD27 0x104
+#define IOCTL_PCI_AD26 0x108
+#define IOCTL_PCI_AD25 0x10C
+#define IOCTL_PCI_AD24 0x110
+#define IOCTL_PCI_AD23 0x114
+#define IOCTL_PCI_AD22 0x118
+#define IOCTL_PCI_AD21 0x11C
+#define IOCTL_PCI_AD20 0x120
+#define IOCTL_PCI_AD19 0x124
+#define IOCTL_PCI_AD18 0x128
+#define IOCTL_PCI_AD17 0x12C
+#define IOCTL_PCI_AD16 0x130
+#define IOCTL_PCI_AD15 0x134
+#define IOCTL_PCI_AD14 0x138
+#define IOCTL_PCI_AD13 0x13C
+#define IOCTL_PCI_AD12 0x140
+#define IOCTL_PCI_AD11 0x144
+#define IOCTL_PCI_AD10 0x148
+#define IOCTL_PCI_AD09 0x14C
+#define IOCTL_PCI_AD08 0x150
+#define IOCTL_PCI_AD07 0x154
+#define IOCTL_PCI_AD06 0x158
+#define IOCTL_PCI_AD05 0x15C
+#define IOCTL_PCI_AD04 0x160
+#define IOCTL_PCI_AD03 0x164
+#define IOCTL_PCI_AD02 0x168
+#define IOCTL_PCI_AD01 0x16C
+#define IOCTL_PCI_AD00 0x170
+#define IOCTL_PCI_CBE0 0x174
+#define IOCTL_PCI_CBE1 0x178
+#define IOCTL_PCI_CBE2 0x17C
+#define IOCTL_PCI_CBE3 0x180
+#define IOCTL_PCI_GNT2 0x184
+#define IOCTL_PCI_REQ2 0x188
+#define IOCTL_PCI_GNT1 0x18C
+#define IOCTL_PCI_REQ1 0x190
+#define IOCTL_PCI_GNT0 0x194
+#define IOCTL_PCI_REQ0 0x198
+#define IOCTL_PCI_INTA 0x19C
+#define IOCTL_PCI_CLK 0x1A0
+#define IOCTL_PCI_RST_OUT 0x1A4
+#define IOCTL_PCI_FRAME 0x1A8
+#define IOCTL_PCI_IDSEL 0x1AC
+#define IOCTL_PCI_DEVSEL 0x1B0
+#define IOCTL_PCI_IRDY 0x1B4
+#define IOCTL_PCI_TRDY 0x1B8
+#define IOCTL_PCI_STOP 0x1BC
+#define IOCTL_PCI_PAR 0x1C0
+#define IOCTL_PCI_PERR 0x1C4
+#define IOCTL_PCI_SERR 0x1C8
+#define IOCTL_SPDIF_TXCLK 0x1CC
+#define IOCTL_SPDIF_TX 0x1D0
+#define IOCTL_SPDIF_RX 0x1D4
+#define IOCTL_I2C0_SCL 0x1D8
+#define IOCTL_I2C0_SDA 0x1DC
+#define IOCTL_I2C1_SCL 0x1E0
+#define IOCTL_I2C1_SDA 0x1E4
+#define IOCTL_I2C2_SCL 0x1E8
+#define IOCTL_I2C2_SDA 0x1EC
+#define IOCTL_IRQ0 0x1F0
+#define IOCTL_IRQ1 0x1F4
+#define IOCTL_CAN1_TX 0x1F8
+#define IOCTL_CAN2_TX 0x1FC
+#define IOCTL_J1850_TX 0x200
+#define IOCTL_J1850_RX 0x204
+#define IOCTL_PSC_MCLK_IN 0x208
+#define IOCTL_PSC0_0 0x20C
+#define IOCTL_PSC0_1 0x210
+#define IOCTL_PSC0_2 0x214
+#define IOCTL_PSC0_3 0x218
+#define IOCTL_PSC0_4 0x21C
+#define IOCTL_PSC1_0 0x220
+#define IOCTL_PSC1_1 0x224
+#define IOCTL_PSC1_2 0x228
+#define IOCTL_PSC1_3 0x22C
+#define IOCTL_PSC1_4 0x230
+#define IOCTL_PSC2_0 0x234
+#define IOCTL_PSC2_1 0x238
+#define IOCTL_PSC2_2 0x23C
+#define IOCTL_PSC2_3 0x240
+#define IOCTL_PSC2_4 0x244
+#define IOCTL_PSC3_0 0x248
+#define IOCTL_PSC3_1 0x24C
+#define IOCTL_PSC3_2 0x250
+#define IOCTL_PSC3_3 0x254
+#define IOCTL_PSC3_4 0x258
+#define IOCTL_PSC4_0 0x25C
+#define IOCTL_PSC4_1 0x260
+#define IOCTL_PSC4_2 0x264
+#define IOCTL_PSC4_3 0x268
+#define IOCTL_PSC4_4 0x26C
+#define IOCTL_PSC5_0 0x270
+#define IOCTL_PSC5_1 0x274
+#define IOCTL_PSC5_2 0x278
+#define IOCTL_PSC5_3 0x27C
+#define IOCTL_PSC5_4 0x280
+#define IOCTL_PSC6_0 0x284
+#define IOCTL_PSC6_1 0x288
+#define IOCTL_PSC6_2 0x28C
+#define IOCTL_PSC6_3 0x290
+#define IOCTL_PSC6_4 0x294
+#define IOCTL_PSC7_0 0x298
+#define IOCTL_PSC7_1 0x29C
+#define IOCTL_PSC7_2 0x2A0
+#define IOCTL_PSC7_3 0x2A4
+#define IOCTL_PSC7_4 0x2A8
+#define IOCTL_PSC8_0 0x2AC
+#define IOCTL_PSC8_1 0x2B0
+#define IOCTL_PSC8_2 0x2B4
+#define IOCTL_PSC8_3 0x2B8
+#define IOCTL_PSC8_4 0x2BC
+#define IOCTL_PSC9_0 0x2C0
+#define IOCTL_PSC9_1 0x2C4
+#define IOCTL_PSC9_2 0x2C8
+#define IOCTL_PSC9_3 0x2CC
+#define IOCTL_PSC9_4 0x2D0
+#define IOCTL_PSC10_0 0x2D4
+#define IOCTL_PSC10_1 0x2D8
+#define IOCTL_PSC10_2 0x2DC
+#define IOCTL_PSC10_3 0x2E0
+#define IOCTL_PSC10_4 0x2E4
+#define IOCTL_PSC11_0 0x2E8
+#define IOCTL_PSC11_1 0x2EC
+#define IOCTL_PSC11_2 0x2F0
+#define IOCTL_PSC11_3 0x2F4
+#define IOCTL_PSC11_4 0x2F8
+#define IOCTL_HRESET 0x2FC
+#define IOCTL_SRESET 0x300
+#define IOCTL_CKSTP_OUT 0x304
+#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
+#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
+#define IOCTL_USB2_PHY_DRVV_BUS 0x310
-/* Indexes in regs array */
-#define MEM_IDX 0x00
-#define PATA_CE1_IDX 0x2e
-#define PATA_CE2_IDX 0x2f
-#define PATA_ISOLATE_IDX 0x30
-#define PATA_IOR_IDX 0x31
-#define PATA_IOW_IDX 0x32
-#define PATA_IOCHRDY_IDX 0x33
-#define PATA_INTRQ_IDX 0x34
-#define PATA_DRQ_IDX 0x35
-#define PATA_DACK_IDX 0x36
-#define SPDIF_TXCLOCK_IDX 0x73
-#define SPDIF_TX_IDX 0x74
-#define SPDIF_RX_IDX 0x75
-#define PSC0_0_IDX 0x83
-#define PSC0_1_IDX 0x84
-#define PSC0_2_IDX 0x85
-#define PSC0_3_IDX 0x86
-#define PSC0_4_IDX 0x87
-#define PSC1_0_IDX 0x88
-#define PSC1_1_IDX 0x89
-#define PSC1_2_IDX 0x8a
-#define PSC1_3_IDX 0x8b
-#define PSC1_4_IDX 0x8c
-#define PSC2_0_IDX 0x8d
-#define PSC2_1_IDX 0x8e
-#define PSC2_2_IDX 0x8f
-#define PSC2_3_IDX 0x90
-#define PSC2_4_IDX 0x91
+#ifndef __ASSEMBLY__
+
-#define IOCTRL_FUNCMUX_SHIFT 7
-#define IOCTRL_FUNCMUX_FEC 1
-#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
+/* IO pin fields */
+#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
+#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
+#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
+#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
+#define IO_PIN_DS(v) ((v)) /* slew rate */
+typedef struct iopin_t {
+ int p_offset; /* offset from IOCTL_MEM_OFFSET */
+ int nr_pins; /* number of pins to set this way */
+ int bit_or; /* or in the value instead of overwrite */
+ u_long val; /* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+#endif
+
+/* Indexes in regs array */
/* Set for DDR */
#define IOCTRL_MUX_DDR 0x00000036
diff --git a/include/usb.h b/include/usb.h
index 5a6ffdd..e68e98e 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -171,7 +171,7 @@
#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
- defined(CONFIG_USB_ISP116X_HCD)
+ defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);