mxs: prefix register acessor macros with 'mxs' prefix

As the register accessing mode is the same for all i.MXS SoCs we ought
to use 'mxs' prefix intead of 'mx28'.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 0439f9c..3e29c56 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -207,7 +207,7 @@
 		return;
 
 	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
-			(ssp * sizeof(struct mx28_register_32));
+			(ssp * sizeof(struct mxs_register_32));
 
 	clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
 	while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
@@ -256,7 +256,7 @@
 		return XTAL_FREQ_KHZ;
 
 	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
-			(ssp * sizeof(struct mx28_register_32));
+			(ssp * sizeof(struct mxs_register_32));
 
 	tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;
 
diff --git a/arch/arm/cpu/arm926ejs/mxs/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c
index 12916b6..73f1446 100644
--- a/arch/arm/cpu/arm926ejs/mxs/iomux.c
+++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c
@@ -43,7 +43,7 @@
 {
 	u32 reg, ofs, bp, bm;
 	void *iomux_base = (void *)MXS_PINCTRL_BASE;
-	struct mx28_register_32 *mxs_reg;
+	struct mxs_register_32 *mxs_reg;
 
 	/* muxsel */
 	ofs = 0x100;
@@ -70,7 +70,7 @@
 	/* vol */
 	if (PAD_VOL_VALID(pad)) {
 		bp = PAD_PIN(pad) % 8 * 4 + 2;
-		mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs);
+		mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs);
 		if (PAD_VOL(pad))
 			writel(1 << bp, &mxs_reg->reg_set);
 		else
@@ -82,7 +82,7 @@
 		ofs = PULL_OFFSET;
 		ofs += PAD_BANK(pad) * 0x10;
 		bp = PAD_PIN(pad);
-		mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs);
+		mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs);
 		if (PAD_PULL(pad))
 			writel(1 << bp, &mxs_reg->reg_set);
 		else
diff --git a/arch/arm/cpu/arm926ejs/mxs/mx28.c b/arch/arm/cpu/arm926ejs/mxs/mx28.c
index cf7a50f..65fcd75 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mx28.c
@@ -81,7 +81,7 @@
 #endif
 }
 
-int mx28_wait_mask_set(struct mx28_register_32 *reg, uint32_t mask, int timeout)
+int mx28_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
 {
 	while (--timeout) {
 		if ((readl(&reg->reg) & mask) == mask)
@@ -92,7 +92,7 @@
 	return !timeout;
 }
 
-int mx28_wait_mask_clr(struct mx28_register_32 *reg, uint32_t mask, int timeout)
+int mx28_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, int timeout)
 {
 	while (--timeout) {
 		if ((readl(&reg->reg) & mask) == 0)
@@ -103,7 +103,7 @@
 	return !timeout;
 }
 
-int mx28_reset_block(struct mx28_register_32 *reg)
+int mx28_reset_block(struct mxs_register_32 *reg)
 {
 	/* Clear SFTRST */
 	writel(MX28_BLOCK_SFTRST, &reg->reg_clr);