diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index f1ea17d..98236ef 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -65,6 +65,10 @@
 			printf("e300c3, ");
 			break;
 
+		case PVR_E300C4:
+			printf("e300c4, ");
+			break;
+
 		default:
 			printf("Unknown core, ");
 	}
@@ -149,6 +153,24 @@
 	case SPR_8313E_REV10:
 		puts("MPC8313E, ");
 		break;
+	case SPR_8379E_REV10:
+		puts("MPC8379E, ");
+		break;
+	case SPR_8379_REV10:
+		puts("MPC8379, ");
+		break;
+	case SPR_8378E_REV10:
+		puts("MPC8378E, ");
+		break;
+	case SPR_8378_REV10:
+		puts("MPC8378, ");
+		break;
+	case SPR_8377E_REV10:
+		puts("MPC8377E, ");
+		break;
+	case SPR_8377_REV10:
+		puts("MPC8377, ");
+		break;
 	default:
 		printf("Rev: Unknown revision number:%08x\n"
 			"Warning: Unsupported cpu revision!\n",spridr);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index cba57fa..23dfb30 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -100,7 +100,7 @@
 	u32 lcrr;
 
 	u32 csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
@@ -113,6 +113,9 @@
 #if !defined(CONFIG_MPC832X)
 	u32 i2c2_clk;
 #endif
+#if defined(CONFIG_MPC837X)
+	u32 sdhc_clk;
+#endif
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
@@ -126,6 +129,11 @@
 	u32 qe_clk;
 	u32 brg_clk;
 #endif
+#if defined(CONFIG_MPC837X)
+	u32 pciexp1_clk;
+	u32 pciexp2_clk;
+	u32 sata_clk;
+#endif
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
@@ -151,7 +159,7 @@
 
 	sccr = im->clk.sccr;
 
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
 		tsec1_clk = 0;
@@ -167,7 +175,7 @@
 		break;
 	default:
 		/* unkown SCCR_TSEC1CM value */
-		return -4;
+		return -2;
 	}
 
 	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
@@ -185,11 +193,11 @@
 		break;
 	default:
 		/* unkown SCCR_USBDRCM value */
-		return -8;
+		return -3;
 	}
 #endif
 
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X)
 	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
 	case 0:
 		tsec2_clk = 0;
@@ -205,11 +213,18 @@
 		break;
 	default:
 		/* unkown SCCR_TSEC2CM value */
-		return -5;
+		return -4;
 	}
+#elif defined(CONFIG_MPC831X)
+	tsec2_clk = tsec1_clk;
 
-	i2c1_clk = tsec2_clk;
+	if (!(sccr & SCCR_TSEC1ON))
+		tsec1_clk = 0;
+	if (!(sccr & SCCR_TSEC2ON))
+		tsec2_clk = 0;
+#endif
 
+#if defined(CONFIG_MPC834X)
 	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
 	case 0:
 		usbmph_clk = 0;
@@ -225,7 +240,7 @@
 		break;
 	default:
 		/* unkown SCCR_USBMPHCM value */
-		return -7;
+		return -5;
 	}
 
 	if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
@@ -233,42 +248,120 @@
 		 * USB DR clock is not disabled then
 		 * USB MPH & USB DR must have the same rate
 		 */
-		return -9;
+		return -6;
 	}
-#elif defined(CONFIG_MPC831X)
-	tsec2_clk = tsec1_clk;
+#endif
+	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+	case 0:
+		enc_clk = 0;
+		break;
+	case 1:
+		enc_clk = csb_clk;
+		break;
+	case 2:
+		enc_clk = csb_clk / 2;
+		break;
+	case 3:
+		enc_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_ENCCM value */
+		return -7;
+	}
 
-	if (!(sccr & SCCR_TSEC1ON))
-		tsec1_clk = 0;
-	if (!(sccr & SCCR_TSEC2ON))
-		tsec2_clk = 0;
+#if defined(CONFIG_MPC837X)
+	switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
+	case 0:
+		sdhc_clk = 0;
+		break;
+	case 1:
+		sdhc_clk = csb_clk;
+		break;
+	case 2:
+		sdhc_clk = csb_clk / 2;
+		break;
+	case 3:
+		sdhc_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_SDHCCM value */
+		return -8;
+	}
 #endif
 
-#if !defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X)
+	i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
 	i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832X)
+	i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831X)
+	i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837X)
+	i2c1_clk = sdhc_clk;
 #endif
 #if !defined(CONFIG_MPC832X)
-	i2c2_clk = csb_clk;	/* i2c-2 clk is equal to csb clk */
+	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
 #endif
 
-	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+	switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
 	case 0:
-		enc_clk = 0;
+		pciexp1_clk = 0;
 		break;
 	case 1:
-		enc_clk = csb_clk;
+		pciexp1_clk = csb_clk;
 		break;
 	case 2:
-		enc_clk = csb_clk / 2;
+		pciexp1_clk = csb_clk / 2;
 		break;
 	case 3:
-		enc_clk = csb_clk / 3;
+		pciexp1_clk = csb_clk / 3;
 		break;
 	default:
-		/* unkown SCCR_ENCCM value */
-		return -6;
+		/* unkown SCCR_PCIEXP1CM value */
+		return -9;
 	}
 
+	switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+	case 0:
+		pciexp2_clk = 0;
+		break;
+	case 1:
+		pciexp2_clk = csb_clk;
+		break;
+	case 2:
+		pciexp2_clk = csb_clk / 2;
+		break;
+	case 3:
+		pciexp2_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_PCIEXP2CM value */
+		return -10;
+	}
+#endif
+
+#if defined(CONFIG_MPC837X)
+	switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+	case 0:
+		sata_clk = 0;
+		break;
+	case 1:
+		sata_clk = csb_clk;
+		break;
+	case 2:
+		sata_clk = csb_clk / 2;
+		break;
+	case 3:
+		sata_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_SATA1CM value */
+		return -11;
+	}
+#endif
+
 	lbiu_clk = csb_clk *
 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
@@ -280,7 +373,7 @@
 		break;
 	default:
 		/* unknown lcrr */
-		return -10;
+		return -12;
 	}
 
 	ddr_clk = csb_clk *
@@ -316,7 +409,7 @@
 		break;
 	default:
 		/* unkown core to csb ratio */
-		return -12;
+		return -13;
 	}
 
 #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
@@ -327,7 +420,7 @@
 #endif
 
 	gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	gd->tsec1_clk = tsec1_clk;
 	gd->tsec2_clk = tsec2_clk;
 	gd->usbdr_clk = usbdr_clk;
@@ -335,6 +428,9 @@
 #if defined(CONFIG_MPC834X)
 	gd->usbmph_clk = usbmph_clk;
 #endif
+#if defined(CONFIG_MPC837X)
+	gd->sdhc_clk = sdhc_clk;
+#endif
 	gd->core_clk = core_clk;
 	gd->i2c1_clk = i2c1_clk;
 #if !defined(CONFIG_MPC832X)
@@ -351,6 +447,11 @@
 	gd->qe_clk = qe_clk;
 	gd->brg_clk = brg_clk;
 #endif
+#if defined(CONFIG_MPC837X)
+	gd->pciexp1_clk = pciexp1_clk;
+	gd->pciexp2_clk = pciexp2_clk;
+	gd->sata_clk = sata_clk;
+#endif
 	gd->pci_clk = pci_sync_in;
 	gd->cpu_clk = gd->core_clk;
 	gd->bus_clk = gd->csb_clk;
@@ -387,7 +488,10 @@
 #if !defined(CONFIG_MPC832X)
 	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
 #endif
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC837X)
+	printf("  SDHC:                %4d MHz\n", gd->sdhc_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
 	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
 	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
@@ -395,6 +499,11 @@
 #if defined(CONFIG_MPC834X)
 	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
 #endif
+#if defined(CONFIG_MPC837X)
+	printf("  PCIEXP1:             %4d MHz\n", gd->pciexp1_clk / 1000000);
+	printf("  PCIEXP2:             %4d MHz\n", gd->pciexp2_clk / 1000000);
+	printf("  SATA:                %4d MHz\n", gd->sata_clk / 1000000);
+#endif
 	return 0;
 }
 
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 05aee74..6ce072f 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -55,7 +55,7 @@
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
-#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
@@ -63,6 +63,9 @@
 #if defined (CONFIG_MPC834X)
 	u32 usbmph_clk;
 #endif /* CONFIG_MPC834X */
+#if defined(CONFIG_MPC837X)
+	u32 sdhc_clk;
+#endif
 	u32 core_clk;
 	u32 i2c1_clk;
 	u32 i2c2_clk;
@@ -71,6 +74,11 @@
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_MPC837X)
+	u32 pciexp1_clk;
+	u32 pciexp2_clk;
+	u32 sata_clk;
+#endif
 #if defined(CONFIG_MPC8360)
 	u32  ddr_sec_clk;
 #endif /* CONFIG_MPC8360 */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 0de9338..7517111 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
  *
  * MPC83xx Internal Memory Map
  *
@@ -63,7 +63,8 @@
 	u8 res6[0x0C];
 	u32 ddrcdr;		/* DDR Control Driver Register */
 	u32 ddrdsr;		/* DDR Debug Status Register */
-	u8 res7[0xD0];
+	u32 obir;		/* Output Buffer Impedance Register */
+	u8 res7[0xCC];
 } sysconf83xx_t;
 
 /*
@@ -553,6 +554,41 @@
 	u8 fixme[0x10000];
 } security83xx_t;
 
+/*
+ *  PCI Express
+ */
+typedef struct pex83xx {
+	u8 fixme[0x1000];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+	u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+	u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+	u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+	u8 mem[0x10000];
+} rom83xx_t;
+
 #if defined(CONFIG_MPC834X)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
@@ -625,6 +661,50 @@
 	u8			res7[0xC0000];
 } immap_t;
 
+#elif defined(CONFIG_MPC837X)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[2];	/* General purpose I/O module */
+	u8			res0[0x1200];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res1[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res2[0x900];
+	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	u8			res3[0x1000];
+	spi83xx_t		spi;		/* Serial Peripheral Interface */
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
+	u8			res4[0x80];
+	ios83xx_t		ios;		/* Sequencer */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8			res5[0xa00];
+	pex83xx_t		pciexp[2];	/* PCI Express Controller */
+	u8			res6[0xd000];
+	sata83xx_t		sata[4];	/* SATA Controller */
+	u8			res7[0x7000];
+	usb83xx_t		usb[1];		/* USB DR Controller */
+	tsec83xx_t		tsec[2];
+	u8			res8[0x8000];
+	sdhc83xx_t		sdhc;		/* SDHC Controller */
+	u8			res9[0x1000];
+	security83xx_t		security;
+	u8			res10[0xA3000];
+	serdes83xx_t		serdes[2];	/* SerDes Registers */
+	u8			res11[0xCE00];
+	rom83xx_t		rom;		/* On Chip ROM */
+} immap_t;
+
 #elif defined(CONFIG_MPC8360)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 4d32c6a..4c23094 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -98,10 +98,17 @@
 #define SPR_8321E_REV11			0x80660011
 #define SPR_8321_REV11			0x80670011
 
-#define SPR_8311_REV10			0x80B30010
-#define SPR_8311E_REV10			0x80B20010
-#define SPR_8313_REV10			0x80B10010
 #define SPR_8313E_REV10			0x80B00010
+#define SPR_8313_REV10			0x80B10010
+#define SPR_8311E_REV10			0x80B20010
+#define SPR_8311_REV10			0x80B30010
+
+#define SPR_8379E_REV10			0x80C20010
+#define SPR_8379_REV10			0x80C30010
+#define SPR_8378E_REV10			0x80C40010
+#define SPR_8378_REV10			0x80C50010
+#define SPR_8377E_REV10			0x80C60010
+#define SPR_8377_REV10			0x80C70010
 
 /* SPCR - System Priority Configuration Register
  */
@@ -130,8 +137,8 @@
 #define SPCR_TSEC2EP			0x00000003	/* TSEC2 emergency priority */
 #define SPCR_TSEC2EP_SHIFT		(31-31)
 
-#elif defined(CONFIG_MPC831X)
-/* SPCR bits - MPC831x specific */
+#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+/* SPCR bits - MPC831x and MPC837x specific */
 #define SPCR_TSECDP			0x00003000	/* TSEC data priority */
 #define SPCR_TSECDP_SHIFT		(31-19)
 #define SPCR_TSECEP			0x00000C00	/* TSEC emergency priority */
@@ -242,6 +249,55 @@
 #define SICRH_TSOBI1			0x00000002
 #define SICRH_TSOBI2			0x00000001
 
+#elif defined(CONFIG_MPC837X)
+/* SICRL bits - MPC837x specific */
+#define SICRL_USB_A			0xC0000000
+#define SICRL_USB_B			0x30000000
+#define SICRL_UART			0x0C000000
+#define SICRL_GPIO_A			0x02000000
+#define SICRL_GPIO_B			0x01000000
+#define SICRL_GPIO_C			0x00800000
+#define SICRL_GPIO_D			0x00400000
+#define SICRL_GPIO_E			0x00200000
+#define SICRL_GPIO_F			0x00180000
+#define SICRL_GPIO_G			0x00040000
+#define SICRL_GPIO_H			0x00020000
+#define SICRL_GPIO_I			0x00010000
+#define SICRL_GPIO_J			0x00008000
+#define SICRL_GPIO_K			0x00004000
+#define SICRL_GPIO_L			0x00003000
+#define SICRL_DMA_A			0x00000800
+#define SICRL_DMA_B			0x00000400
+#define SICRL_DMA_C			0x00000200
+#define SICRL_DMA_D			0x00000100
+#define SICRL_DMA_E			0x00000080
+#define SICRL_DMA_F			0x00000040
+#define SICRL_DMA_G			0x00000020
+#define SICRL_DMA_H			0x00000010
+#define SICRL_DMA_I			0x00000008
+#define SICRL_DMA_J			0x00000004
+#define SICRL_LDP_A			0x00000002
+#define SICRL_LDP_B			0x00000001
+
+/* SICRH bits - MPC837x specific */
+#define SICRH_DDR			0x80000000
+#define SICRH_TSEC1_A			0x10000000
+#define SICRH_TSEC1_B			0x08000000
+#define SICRH_TSEC2_A			0x00400000
+#define SICRH_TSEC2_B			0x00200000
+#define SICRH_TSEC2_C			0x00100000
+#define SICRH_TSEC2_D			0x00080000
+#define SICRH_TSEC2_E			0x00040000
+#define SICRH_TMR			0x00010000
+#define SICRH_GPIO2_A			0x00008000
+#define SICRH_GPIO2_B			0x00004000
+#define SICRH_GPIO2_C			0x00002000
+#define SICRH_GPIO2_D			0x00001000
+#define SICRH_GPIO2_E			0x00000C00
+#define SICRH_GPIO2_F			0x00000300
+#define SICRH_GPIO2_G			0x000000C0
+#define SICRH_GPIO2_H			0x00000030
+#define SICRH_SPI			0x00000003
 #endif
 
 /* SWCRR - System Watchdog Control Register
@@ -390,6 +446,14 @@
 #define HRCWL_CE_TO_PLL_1X29		0x0000001D
 #define HRCWL_CE_TO_PLL_1X30		0x0000001E
 #define HRCWL_CE_TO_PLL_1X31		0x0000001F
+
+#elif defined(CONFIG_MPC837X)
+#define HRCWL_SVCOD			0x30000000
+#define HRCWL_SVCOD_SHIFT		28
+#define HRCWL_SVCOD_DIV_4		0x00000000
+#define HRCWL_SVCOD_DIV_8		0x10000000
+#define HRCWL_SVCOD_DIV_2		0x20000000
+#define HRCWL_SVCOD_DIV_1		0x30000000
 #endif
 
 /* HRCWH - Hardware Reset Configuration Word High
@@ -436,11 +500,14 @@
 #if defined(CONFIG_MPC834X)
 #define HRCWH_ROM_LOC_PCI2		0x00200000
 #endif
+#if defined(CONIFG_MPC837X)
+#define HRCWH_ROM_LOC_ON_CHIP_ROM	0x00300000
+#endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT	0x00500000
 #define HRCWH_ROM_LOC_LOCAL_16BIT	0x00600000
 #define HRCWH_ROM_LOC_LOCAL_32BIT	0x00700000
 
-#if defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 #define HRCWH_ROM_LOC_NAND_SP_8BIT	0x00100000
 #define HRCWH_ROM_LOC_NAND_SP_16BIT	0x00200000
 #define HRCWH_ROM_LOC_NAND_LP_8BIT	0x00500000
@@ -489,8 +556,13 @@
 
 /* RSR - Reset Status Register
  */
+#if defined(CONFIG_MPC837X)
+#define RSR_RSTSRC			0xF0000000	/* Reset source */
+#define RSR_RSTSRC_SHIFT		28
+#else
 #define RSR_RSTSRC			0xE0000000	/* Reset source */
 #define RSR_RSTSRC_SHIFT		29
+#endif
 #define RSR_BSF				0x00010000	/* Boot seq. fail */
 #define RSR_BSF_SHIFT			16
 #define RSR_SWSR			0x00002000	/* software soft reset */
@@ -577,8 +649,8 @@
 #define SCCR_PCICM			0x00010000
 #define SCCR_PCICM_SHIFT		16
 
-/* SCCR bits - MPC8349 specific */
-#ifdef CONFIG_MPC834X
+#if defined(CONFIG_MPC834X)
+/* SCCR bits - MPC834x specific */
 #define SCCR_TSEC1CM			0xc0000000
 #define SCCR_TSEC1CM_SHIFT		30
 #define SCCR_TSEC1CM_0			0x00000000
@@ -593,6 +665,18 @@
 #define SCCR_TSEC2CM_2			0x20000000
 #define SCCR_TSEC2CM_3			0x30000000
 
+/* The MPH must have the same clock ratio as DR, unless its clock disabled */
+#define SCCR_USBMPHCM			0x00c00000
+#define SCCR_USBMPHCM_SHIFT		22
+#define SCCR_USBDRCM			0x00300000
+#define SCCR_USBDRCM_SHIFT		20
+#define SCCR_USBCM			0x00f00000
+#define SCCR_USBCM_SHIFT		20
+#define SCCR_USBCM_0			0x00000000
+#define SCCR_USBCM_1			0x00500000
+#define SCCR_USBCM_2			0x00A00000
+#define SCCR_USBCM_3			0x00F00000
+
 #elif defined(CONFIG_MPC831X)
 /* TSEC1 bits are for TSEC2 as well */
 #define SCCR_TSEC1CM			0xc0000000
@@ -606,17 +690,67 @@
 #define SCCR_TSEC2ON			0x10000000
 #define SCCR_TSEC2ON_SHIFT		28
 
-#endif
-
-#define SCCR_USBMPHCM			0x00c00000
-#define SCCR_USBMPHCM_SHIFT		22
 #define SCCR_USBDRCM			0x00300000
 #define SCCR_USBDRCM_SHIFT		20
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00100000
+#define SCCR_USBDRCM_2			0x00200000
+#define SCCR_USBDRCM_3			0x00300000
 
-#define SCCR_USBCM_0			0x00000000
-#define SCCR_USBCM_1			0x00500000
-#define SCCR_USBCM_2			0x00A00000
-#define SCCR_USBCM_3			0x00F00000
+#elif defined(CONFIG_MPC837X)
+/* SCCR bits - MPC837x specific */
+#define SCCR_TSEC1CM			0xc0000000
+#define SCCR_TSEC1CM_SHIFT		30
+#define SCCR_TSEC1CM_0			0x00000000
+#define SCCR_TSEC1CM_1			0x40000000
+#define SCCR_TSEC1CM_2			0x80000000
+#define SCCR_TSEC1CM_3			0xC0000000
+
+#define SCCR_TSEC2CM			0x30000000
+#define SCCR_TSEC2CM_SHIFT		28
+#define SCCR_TSEC2CM_0			0x00000000
+#define SCCR_TSEC2CM_1			0x10000000
+#define SCCR_TSEC2CM_2			0x20000000
+#define SCCR_TSEC2CM_3			0x30000000
+
+#define SCCR_SDHCCM			0x0c000000
+#define SCCR_SDHCCM_SHIFT		26
+#define SCCR_SDHCCM_0			0x00000000
+#define SCCR_SDHCCM_1			0x04000000
+#define SCCR_SDHCCM_2			0x08000000
+#define SCCR_SDHCCM_3			0x0c000000
+
+#define SCCR_USBDRCM			0x00c00000
+#define SCCR_USBDRCM_SHIFT		22
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00400000
+#define SCCR_USBDRCM_2			0x00800000
+#define SCCR_USBDRCM_3			0x00c00000
+
+#define SCCR_PCIEXP1CM			0x00300000
+#define SCCR_PCIEXP1CM_SHIFT		20
+#define SCCR_PCIEXP1CM_0		0x00000000
+#define SCCR_PCIEXP1CM_1		0x00100000
+#define SCCR_PCIEXP1CM_2		0x00200000
+#define SCCR_PCIEXP1CM_3		0x00300000
+
+#define SCCR_PCIEXP2CM			0x000c0000
+#define SCCR_PCIEXP2CM_SHIFT		18
+#define SCCR_PCIEXP2CM_0		0x00000000
+#define SCCR_PCIEXP2CM_1		0x00040000
+#define SCCR_PCIEXP2CM_2		0x00080000
+#define SCCR_PCIEXP2CM_3		0x000c0000
+
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM			0x000000c0
+#define SCCR_SATA1CM_SHIFT		6
+#define SCCR_SATACM			0x000000ff
+#define SCCR_SATACM_SHIFT		0
+#define SCCR_SATACM_0			0x00000000
+#define SCCR_SATACM_1			0x00000055
+#define SCCR_SATACM_2			0x000000aa
+#define SCCR_SATACM_3			0x000000ff
+#endif
 
 /* CSn_BDNS - Chip Select memory Bounds Register
  */
@@ -860,7 +994,7 @@
 #define BR_MS_UPMA			0x00000080	/* UPMA */
 #define BR_MS_UPMB			0x000000A0	/* UPMB */
 #define BR_MS_UPMC			0x000000C0	/* UPMC */
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+#if !defined(CONFIG_MPC834X)
 #define BR_ATOM				0x0000000C
 #define BR_ATOM_SHIFT			2
 #endif
@@ -869,7 +1003,7 @@
 
 #if defined(CONFIG_MPC834X)
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#elif defined(CONFIG_MPC8360)
+#else
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
 #endif
 
@@ -1255,7 +1389,7 @@
 #define LTESR_CS		0x00080000
 #define LTESR_CC		0x00000001
 
-/* DDR Control Driver Register
+/* DDRCDR - DDR Control Driver Register
  */
 #define DDRCDR_EN		0x40000000
 #define DDRCDR_PZ		0x3C000000