board: compal: paz00: clean up the board
Since implementation of pinctrl driver for T20 Paz00 can switch
to device tree pinmux setup along with remove of board pinmux
and some minor device tree and defconfig tweaks.
Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
index 5d8f210..5cf604e 100644
--- a/arch/arm/dts/tegra20-paz00.dts
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -522,8 +522,8 @@
power-supply = <&vdd_bl_reg>;
pwms = <&pwm 0 5000000>;
- brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
- default-brightness-level = <10>;
+ brightness-levels = <1 35 70 105 140 175 210 255>;
+ default-brightness-level = <2>;
backlight-boot-off;
};
diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile
deleted file mode 100644
index 22c26ed..0000000
--- a/board/compal/paz00/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-
-obj-y := paz00.o
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
deleted file mode 100644
index d92eb16..0000000
--- a/board/compal/paz00/paz00.c
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch/pinmux.h>
-#include <asm/gpio.h>
-
-#ifdef CONFIG_MMC_SDHCI_TEGRA
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-void pin_mux_mmc(void)
-{
- /* SDMMC4: config 3, x8 on 2nd set of pins */
- pinmux_set_func(PMUX_PINGRP_ATB, PMUX_FUNC_SDIO4);
- pinmux_set_func(PMUX_PINGRP_GMA, PMUX_FUNC_SDIO4);
- pinmux_set_func(PMUX_PINGRP_GME, PMUX_FUNC_SDIO4);
-
- pinmux_tristate_disable(PMUX_PINGRP_ATB);
- pinmux_tristate_disable(PMUX_PINGRP_GMA);
- pinmux_tristate_disable(PMUX_PINGRP_GME);
-
- /* SDIO1: SDIO1_CLK, SDIO1_CMD, SDIO1_DAT[3:0] */
- pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_SDIO1);
-
- pinmux_tristate_disable(PMUX_PINGRP_SDIO1);
-
- /* For power GPIO PV1 */
- pinmux_tristate_disable(PMUX_PINGRP_UAC);
- /* For CD GPIO PV5 */
- pinmux_tristate_disable(PMUX_PINGRP_GPV);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
-/* this is a weak define that we are overriding */
-void pin_mux_display(void)
-{
- debug("init display pinmux\n");
-
- /* EN_VDD_PANEL GPIO A4 */
- pinmux_tristate_disable(PMUX_PINGRP_DAP2);
-}
-#endif
diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig
index 9f3893d..c698493 100644
--- a/configs/paz00_defconfig
+++ b/configs/paz00_defconfig
@@ -46,6 +46,9 @@
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_KEYBOARD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y