ram: k3-j721e: Add support for J721E DDR controller
The J721E DDR subsystem comprises DDR controller, DDR PHY and wrapper
logic to integrate these blocks in the device. The DDR subsystem is
used to provide an interface to external SDRAM devices which can be
utilized for storing program or data. Introduce support for the
DDR controller and DDR phy within the DDR subsystem.
Signed-off-by: Kevin Scholz <k-scholz@ti.com
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/drivers/ram/k3-j721e/lpddr4_private.h b/drivers/ram/k3-j721e/lpddr4_private.h
new file mode 100644
index 0000000..42c9234
--- /dev/null
+++ b/drivers/ram/k3-j721e/lpddr4_private.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/**********************************************************************
+ * Copyright (C) 2012-2018 Cadence Design Systems, Inc.
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ **********************************************************************
+ * Cadence Core Driver for LPDDR4.
+ **********************************************************************
+ */
+
+#ifndef LPDDR4_PRIV_H
+#define LPDDR4_PRIV_H
+
+#define PRODUCT_ID (0x1046U)
+#define VERSION_0 (0x54d5da40U)
+#define VERSION_1 (0xc1865a1U)
+
+#define BIT_MASK (0x1U)
+#define BYTE_MASK (0xffU)
+#define NIBBLE_MASK (0xfU)
+
+#define WORD_SHIFT (32U)
+#define WORD_MASK (0xffffffffU)
+#define SLICE_WIDTH (0x100)
+/* Number of Data slices */
+#define DSLICE_NUM (4U)
+/*Number of Address Slices */
+#define ASLICE_NUM (1U)
+
+/* Number of accessible registers in each slice */
+#define DSLICE0_REG_COUNT (140U)
+#define DSLICE1_REG_COUNT (140U)
+#define DSLICE2_REG_COUNT (140U)
+#define DSLICE3_REG_COUNT (140U)
+#define ASLICE0_REG_COUNT (52U)
+#define PHY_CORE_REG_COUNT (140U)
+
+#define CTL_OFFSET 0
+#define PI_OFFSET (((uint32_t)1) << 11)
+#define PHY_OFFSET (((uint32_t)1) << 12)
+
+/* BIT[17] on INT_MASK_1 register. */
+#define CTL_INT_MASK_ALL ((uint32_t)LPDDR4_LOR_BITS - WORD_SHIFT)
+
+/* Init Error information bits */
+#define PLL_READY (0x3U)
+#define IO_CALIB_DONE ((uint32_t)0x1U << 23U)
+#define IO_CALIB_FIELD ((uint32_t)NIBBLE_MASK << 28U)
+#define IO_CALIB_STATE ((uint32_t)0xBU << 28U)
+#define RX_CAL_DONE ((uint32_t)BIT_MASK << 4U)
+#define CA_TRAIN_RL (((uint32_t)BIT_MASK << 5U) | ((uint32_t)BIT_MASK << 4U))
+#define WR_LVL_STATE (((uint32_t)NIBBLE_MASK) << 13U)
+#define GATE_LVL_ERROR_FIELDS (((uint32_t)BIT_MASK << 7U) | ((uint32_t)BIT_MASK << 6U))
+#define READ_LVL_ERROR_FIELDS ((((uint32_t)NIBBLE_MASK) << 28U) | (((uint32_t)BYTE_MASK) << 16U))
+#define DQ_LVL_STATUS (((uint32_t)BIT_MASK << 26U) | (((uint32_t)BYTE_MASK) << 18U))
+
+#endif /* LPDDR4_PRIV_H */