i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
Add new board names for existing board support
imx6q - icore and icore_rqs boards
imx6ul - geam6ul and isiot boards
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 412e48e..bee7eab 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -205,8 +205,8 @@
config TARGET_MX6QARM2
bool "mx6qarm2"
-config TARGET_MX6Q_ICORE
- bool "Support Engicam i.Core"
+config TARGET_MX6Q_ENGICAM
+ bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
@@ -224,25 +224,6 @@
select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
-config TARGET_MX6Q_ICORE_RQS
- bool "Support Engicam i.Core RQS"
- select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
- select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
- select DM_THERMAL
- select SUPPORT_SPL
- select SPL_LOAD_FIT
- select SPL_DM if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
- select SPL_PINCTRL if SPL
-
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
select MX6QDL
@@ -300,29 +281,12 @@
select BOARD_LATE_INIT
bool "mx6ul_14x14_evk"
select MX6UL
- select DM
- select DM_THERMAL
- select SUPPORT_SPL
-
-config TARGET_MX6UL_GEAM
- bool "Support Engicam GEAM6UL"
- select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
select DM
- select DM_ETH
- select DM_GPIO
- select DM_I2C
- select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
- select SPL_DM if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
- select SPL_PINCTRL if SPL
-config TARGET_MX6UL_ISIOT
- bool "Support Engicam Is.IoT MX6UL"
+config TARGET_MX6UL_ENGICAM
+ bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
@@ -474,10 +438,8 @@
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
-source "board/engicam/geam6ul/Kconfig"
-source "board/engicam/icorem6/Kconfig"
-source "board/engicam/icorem6_rqs/Kconfig"
-source "board/engicam/isiotmx6ul/Kconfig"
+source "board/engicam/imx6q/Kconfig"
+source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
index f86fb2b..f633c71 100644
--- a/board/engicam/common/board.c
+++ b/board/engicam/common/board.c
@@ -49,7 +49,7 @@
} else if (!strcmp(cmp_dtb, "imx6ul-geam-kit"))
env_set("fdt_file", "imx6ul-geam-kit.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-mmc"))
- env_set("fdt_file", "imx6ul-isiot-mmc.dtb");
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-emmc"))
env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-nand"))
diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c
index f8ae3ac..6e2389d 100644
--- a/board/engicam/common/spl.c
+++ b/board/engicam/common/spl.c
@@ -55,6 +55,32 @@
}
#endif
+#ifdef CONFIG_ENV_IS_IN_MMC
+void board_boot_order(u32 *spl_boot_list)
+{
+ u32 bmode = imx6_src_get_boot_mode();
+ u8 boot_dev = BOOT_DEVICE_MMC1;
+
+ switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
+ case IMX6_BMODE_SD:
+ case IMX6_BMODE_ESD:
+ /* SD/eSD - BOOT_DEVICE_MMC1 */
+ break;
+ case IMX6_BMODE_MMC:
+ case IMX6_BMODE_EMMC:
+ /* MMC/eMMC */
+ boot_dev = BOOT_DEVICE_MMC2;
+ break;
+ default:
+ /* Default - BOOT_DEVICE_MMC1 */
+ printf("Wrong board boot order\n");
+ break;
+ }
+
+ spl_boot_list[0] = boot_dev;
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
diff --git a/board/engicam/geam6ul/MAINTAINERS b/board/engicam/geam6ul/MAINTAINERS
deleted file mode 100644
index 2b882d2..0000000
--- a/board/engicam/geam6ul/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-GEAM6UL BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/geam6ul
-F: include/configs/imx6-engicam.h
-F: configs/imx6ul_geam_mmc_defconfig
-F: configs/imx6ul_geam_nand_defconfig
-F: arch/arm/dts/imx6ul-geam-kit.dts
diff --git a/board/engicam/geam6ul/Makefile b/board/engicam/geam6ul/Makefile
deleted file mode 100644
index 0e367e2..0000000
--- a/board/engicam/geam6ul/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := geam6ul.o
diff --git a/board/engicam/geam6ul/README b/board/engicam/geam6ul/README
deleted file mode 100644
index 0df6ae4..0000000
--- a/board/engicam/geam6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam GEAM6UL Starter Kit:
--------------------------------------------------
-
-- Configure U-Boot for Engicam GEAM6UL:
-
-$ make mrproper
-$ make imx6ul_geam_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/icorem6/Kconfig b/board/engicam/icorem6/Kconfig
deleted file mode 100644
index 4a1c9ac..0000000
--- a/board/engicam/icorem6/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6Q_ICORE
-
-config SYS_BOARD
- default "icorem6"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/icorem6/MAINTAINERS b/board/engicam/icorem6/MAINTAINERS
deleted file mode 100644
index a348bdde..0000000
--- a/board/engicam/icorem6/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-ICOREM6QDL BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/icorem6
-F: include/configs/imx6-engicam.h
-F: configs/imx6qdl_icore_mmc_defconfig
-F: configs/imx6qdl_icore_nand_defconfig
-F: arch/arm/dts/imx6qdl-icore.dtsi
-F: arch/arm/dts/imx6q-icore.dts
-F: arch/arm/dts/imx6dl-icore.dts
diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README
deleted file mode 100644
index 3779e96..0000000
--- a/board/engicam/icorem6/README
+++ /dev/null
@@ -1,30 +0,0 @@
-How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
------------------------------------------------------------------------------
-
-$ make mrproper
-
-- Configure U-Boot for Engicam i.CoreM6 Quad/Dual/Solo/DualLite:
-$ make imx6qdl_icore_mmc_defconfig
-
-- Build U-Boot
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/icorem6_rqs/Kconfig b/board/engicam/icorem6_rqs/Kconfig
deleted file mode 100644
index 6dc3a07..0000000
--- a/board/engicam/icorem6_rqs/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6Q_ICORE_RQS
-
-config SYS_BOARD
- default "icorem6_rqs"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/icorem6_rqs/MAINTAINERS b/board/engicam/icorem6_rqs/MAINTAINERS
deleted file mode 100644
index 9a74265..0000000
--- a/board/engicam/icorem6_rqs/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-ICOREM6QDL_RQS BOARD
-M: Jagan Teki <jagan@amarulasolutions.com>
-S: Maintained
-F: board/engicam/icorem6_rqs
-F: include/configs/imx6-engicam.h
-F: configs/imx6qdl_icore_rqs_defconfig
-F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
-F: arch/arm/dts/imx6q-icore-rqs.dts
-F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/icorem6_rqs/Makefile b/board/engicam/icorem6_rqs/Makefile
deleted file mode 100644
index 2e3933c..0000000
--- a/board/engicam/icorem6_rqs/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := icorem6_rqs.o
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/imx6q/Kconfig
similarity index 73%
rename from board/engicam/geam6ul/Kconfig
rename to board/engicam/imx6q/Kconfig
index 7f4023e..48eb60c 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/imx6q/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6UL_GEAM
+if TARGET_MX6Q_ENGICAM
config SYS_BOARD
- default "geam6ul"
+ default "imx6q"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/imx6q/MAINTAINERS b/board/engicam/imx6q/MAINTAINERS
new file mode 100644
index 0000000..82efb46
--- /dev/null
+++ b/board/engicam/imx6q/MAINTAINERS
@@ -0,0 +1,14 @@
+MX6Q_ENGICAM BOARD
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: board/engicam/imx6q
+F: include/configs/imx6-engicam.h
+F: configs/imx6qdl_icore_mmc_defconfig
+F: configs/imx6qdl_icore_nand_defconfig
+F: configs/imx6qdl_icore_rqs_defconfig
+F: arch/arm/dts/imx6qdl-icore.dtsi
+F: arch/arm/dts/imx6q-icore.dts
+F: arch/arm/dts/imx6dl-icore.dts
+F: arch/arm/dts/imx6qdl-icore-rqs.dtsi
+F: arch/arm/dts/imx6q-icore-rqs.dts
+F: arch/arm/dts/imx6dl-icore-rqs.dts
diff --git a/board/engicam/icorem6/Makefile b/board/engicam/imx6q/Makefile
similarity index 80%
rename from board/engicam/icorem6/Makefile
rename to board/engicam/imx6q/Makefile
index 9ec9ecd..ef2fb6a 100644
--- a/board/engicam/icorem6/Makefile
+++ b/board/engicam/imx6q/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := icorem6.o
+obj-y := imx6q.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/imx6q/README
similarity index 71%
copy from board/engicam/icorem6_rqs/README
copy to board/engicam/imx6q/README
index 97e978c..3f3478c 100644
--- a/board/engicam/icorem6_rqs/README
+++ b/board/engicam/imx6q/README
@@ -1,9 +1,12 @@
-How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam i.CoreM6 (RQS) Solo/DualLite/Quad/Dual Starter Kit:
+--------------------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual/Solo/DualLite:
+- Configure U-Boot for Engicam i.CoreM6 Quad/Duali/Solo/DualLite:
+$ make imx6qdl_icore_mmc_defconfig
+
+- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Duali/Solo/DualLite:
$ make imx6qdl_icore_rqs_defconfig
- Build U-Boot
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/imx6q/imx6q.c
similarity index 97%
rename from board/engicam/icorem6/icorem6.c
rename to board/engicam/imx6q/imx6q.c
index a967ccd..bb0c866 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/imx6q/imx6q.c
@@ -25,13 +25,12 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
-
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-iomux_v3_cfg_t gpmi_pads[] = {
+static iomux_v3_cfg_t gpmi_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
@@ -190,3 +189,10 @@
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
+{
+ return devno - 1;
+}
+#endif
diff --git a/board/engicam/geam6ul/Kconfig b/board/engicam/imx6ul/Kconfig
similarity index 72%
copy from board/engicam/geam6ul/Kconfig
copy to board/engicam/imx6ul/Kconfig
index 7f4023e..e91dd15 100644
--- a/board/engicam/geam6ul/Kconfig
+++ b/board/engicam/imx6ul/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_MX6UL_GEAM
+if TARGET_MX6UL_ENGICAM
config SYS_BOARD
- default "geam6ul"
+ default "imx6ul"
config SYS_VENDOR
default "engicam"
diff --git a/board/engicam/isiotmx6ul/MAINTAINERS b/board/engicam/imx6ul/MAINTAINERS
similarity index 69%
rename from board/engicam/isiotmx6ul/MAINTAINERS
rename to board/engicam/imx6ul/MAINTAINERS
index 9b66c8d..37f84f8 100644
--- a/board/engicam/isiotmx6ul/MAINTAINERS
+++ b/board/engicam/imx6ul/MAINTAINERS
@@ -1,11 +1,14 @@
-ISIOTMX6UL BOARD
+MX6UL_ENGICAM BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
-F: board/engicam/isiotmx6ul
+F: board/engicam/imx6ul
F: include/configs/imx6-engicam.h
-F: configs/imx6ul_isiot_mmc_defconfig
+F: configs/imx6ul_geam_mmc_defconfig
+F: configs/imx6ul_geam_nand_defconfig
F: configs/imx6ul_isiot_emmc_defconfig
+F: configs/imx6ul_isiot_mmc_defconfig
F: configs/imx6ul_isiot_nand_defconfig
+F: arch/arm/dts/imx6ul-geam-kit.dts
F: arch/arm/dts/imx6ul-isiot.dtsi
F: arch/arm/dts/imx6ul-isiot-mmc.dts
F: arch/arm/dts/imx6ul-isiot-emmc.dts
diff --git a/board/engicam/icorem6/Makefile b/board/engicam/imx6ul/Makefile
similarity index 80%
copy from board/engicam/icorem6/Makefile
copy to board/engicam/imx6ul/Makefile
index 9ec9ecd..c78c7e4 100644
--- a/board/engicam/icorem6/Makefile
+++ b/board/engicam/imx6ul/Makefile
@@ -3,4 +3,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := icorem6.o
+obj-y := imx6ul.o
diff --git a/board/engicam/icorem6_rqs/README b/board/engicam/imx6ul/README
similarity index 74%
rename from board/engicam/icorem6_rqs/README
rename to board/engicam/imx6ul/README
index 97e978c..1e85f61 100644
--- a/board/engicam/icorem6_rqs/README
+++ b/board/engicam/imx6ul/README
@@ -1,10 +1,13 @@
-How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
-----------------------------------------------------------------------------------
+Hsow to use U-Boot on Engicam GEAM6UL and Is.IoT MX6UL Starter Kit:
+-------------------------------------------------------------------
$ make mrproper
-- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual/Solo/DualLite:
-$ make imx6qdl_icore_rqs_defconfig
+- Configure U-Boot for Engicam GEAM6UL:
+$ make imx6ul_geam_mmc_defconfig
+
+- Configure U-Boot for Engicam Is.IoT MX6UL:
+$ make imx6ul_isiot_mmc_defconfig
- Build U-Boot
$ make
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/imx6ul/imx6ul.c
similarity index 94%
rename from board/engicam/geam6ul/geam6ul.c
rename to board/engicam/imx6ul/imx6ul.c
index 23e7e4b..a903a36 100644
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/imx6ul/imx6ul.c
@@ -7,6 +7,7 @@
*/
#include <common.h>
+#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -88,3 +89,11 @@
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
#endif /* CONFIG_NAND_MXS */
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+int board_mmc_get_env_dev(int devno)
+{
+ /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
+ return (devno == 0) ? 0 : 1;
+}
+#endif
diff --git a/board/engicam/isiotmx6ul/Kconfig b/board/engicam/isiotmx6ul/Kconfig
deleted file mode 100644
index 10c2c50..0000000
--- a/board/engicam/isiotmx6ul/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6UL_ISIOT
-
-config SYS_BOARD
- default "isiotmx6ul"
-
-config SYS_VENDOR
- default "engicam"
-
-config SYS_CONFIG_NAME
- default "imx6-engicam"
-
-endif
diff --git a/board/engicam/isiotmx6ul/Makefile b/board/engicam/isiotmx6ul/Makefile
deleted file mode 100644
index f4f8c78..0000000
--- a/board/engicam/isiotmx6ul/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Copyright (C) 2016 Amarula Solutions B.V.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := isiotmx6ul.o
diff --git a/board/engicam/isiotmx6ul/README b/board/engicam/isiotmx6ul/README
deleted file mode 100644
index 1d177ac..0000000
--- a/board/engicam/isiotmx6ul/README
+++ /dev/null
@@ -1,28 +0,0 @@
-How to use U-Boot on Engicam Is.IoT MX6UL Starter Kit:
------------------------------------------------------
-
-- Configure U-Boot for Engicam Is.IoT MX6UL
-
-$ make mrproper
-$ make imx6ul_isiot_mmc_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot-dtb.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot-dtb.img image into the micro SD card:
-
-sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Jumper settings:
-
-MMC Boot: JM3 Closed
-
-- Connect the Serial cable between the Starter Kit and the PC for the console.
-(J28 is the Linux Serial console connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
deleted file mode 100644
index 05d23c2..0000000
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_NAND_MXS
-
-#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
- PAD_CTL_SRE_FAST)
-#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
-
-static iomux_v3_cfg_t const nand_pads[] = {
- IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
- IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
-};
-
-void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- SETUP_IOMUX_PADS(nand_pads);
-
- clrbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /*
- * config gpmi and bch clock to 100 MHz
- * bch/gpmi select PLL2 PFD2 400M
- * 100M = 400M / 4
- */
- clrbits_le32(&mxc_ccm->cscmr1,
- MXC_CCM_CSCMR1_BCH_CLK_SEL |
- MXC_CCM_CSCMR1_GPMI_CLK_SEL);
- clrsetbits_le32(&mxc_ccm->cscdr1,
- MXC_CCM_CSCDR1_BCH_PODF_MASK |
- MXC_CCM_CSCDR1_GPMI_PODF_MASK,
- (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
- (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#endif /* CONFIG_NAND_MXS */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-int board_mmc_get_env_dev(int devno)
-{
- /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
- return (devno == 0) ? 0 : 1;
-}
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-void board_boot_order(u32 *spl_boot_list)
-{
- u32 bmode = imx6_src_get_boot_mode();
- u8 boot_dev = BOOT_DEVICE_MMC1;
-
- switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- /* SD/eSD - BOOT_DEVICE_MMC1 */
- break;
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
- /* MMC/eMMC */
- boot_dev = BOOT_DEVICE_MMC2;
- break;
- default:
- /* Default - BOOT_DEVICE_MMC1 */
- printf("Wrong board boot order\n");
- break;
- }
-
- spl_boot_list[0] = boot_dev;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 31cf1e6..256ccb9 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
index ab8b6d2..21cfb85 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6qdl_icore_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index 1e57deb..6cf9852 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ICORE_RQS=y
+CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
index c147d4a..b2ac4a2 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index 4e51892..d920af7 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig
index 5f8a574..72ae08e 100644
--- a/configs/imx6ul_isiot_emmc_defconfig
+++ b/configs/imx6ul_isiot_emmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
index 367dfa1..ffd12bf 100644
--- a/configs/imx6ul_isiot_mmc_defconfig
+++ b/configs/imx6ul_isiot_mmc_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
index dde1cc2..aaaf9e6 100644
--- a/configs/imx6ul_isiot_nand_defconfig
+++ b/configs/imx6ul_isiot_nand_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6UL_ISIOT=y
+CONFIG_TARGET_MX6UL_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set