diff --git a/MAKEALL b/MAKEALL
index 61ce5ad..ab47cbf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -317,7 +317,7 @@
 #########################################################################
 
 LIST_blackfin=" \
-	bf533-ezkit	bf533-stamp	bf537-stamp			\
+	bf533-ezkit	bf533-stamp	bf537-stamp	bf561-ezkit	\
 "
 
 #-----------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index 6fc3bd9..37cdf20 100644
--- a/Makefile
+++ b/Makefile
@@ -182,7 +182,11 @@
 endif
 ifeq ($(CPU),bf537)
 OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
-OBJS += cpu/$(CPU)/flush.o      cpu/$(CPU)/init_sdram.o
+OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf561)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o 	cpu/$(CPU)/init_sdram.o
 endif
 
 OBJS := $(addprefix $(obj),$(OBJS))
@@ -2363,6 +2367,9 @@
 bf537-stamp_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp
 
+bf561-ezkit_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit
+
 #========================================================================
 # AVR32
 #========================================================================
@@ -2399,7 +2406,7 @@
 	rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
 	rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
 	rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
-	rm -f $(obj)board/bf537-stamp/u-boot.lds
+	rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
 	rm -f $(obj)include/bmp_logo.h
 	rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
 
diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile
new file mode 100644
index 0000000..a3c2e5b
--- /dev/null
+++ b/board/bf561-ezkit/Makefile
@@ -0,0 +1,58 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2007 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	mv -f $@.tmp $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
new file mode 100644
index 0000000..71281c0
--- /dev/null
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -0,0 +1,73 @@
+/*
+ * U-boot - ezkit561.c
+ *
+ * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl>
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+int checkboard(void)
+{
+	printf("CPU:   ADSP BF561\n");
+	printf("Board: ADI BF561 EZ-Kit Lite board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
+	return 0;
+}
+
+long int initdram(int board_type)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+#ifdef DEBUG
+	int brate;
+	char *tmp = getenv("baudrate");
+	brate = simple_strtoul(tmp, NULL, 16);
+	printf("Serial Port initialized with Baud rate = %x\n", brate);
+	printf("SDRAM attributes:\n");
+	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
+	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
+	       3, 3, 6, 2, 3);
+	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+#endif
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+	return CFG_MAX_RAM_SIZE;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+	/* Keep PF12 low to be able to drive the USB-LAN Extender */
+	*pFIO0_DIR = 0x0000;
+	*pFIO0_FLAG_C = 0x1000;	/* Clear PF12 */
+	sync();
+	*pFIO0_POLAR = 0x0000;
+	sync();
+
+	return 0;
+}
+#endif
diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk
new file mode 100644
index 0000000..a623c3d
--- /dev/null
+++ b/board/bf561-ezkit/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
+#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
+TEXT_BASE = 0x03FC0000
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
new file mode 100644
index 0000000..84df5fc
--- /dev/null
+++ b/board/bf561-ezkit/u-boot.lds.S
@@ -0,0 +1,153 @@
+/*
+ * U-boot - u-boot.lds.S
+ *
+ * Copyright (c) 2005-2007 Analog Device Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+OUTPUT_ARCH(bfin)
+OUTPUT_ARCH(bfin)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash		: { *(.hash)		}
+  .dynsym	: { *(.dynsym)		}
+  .dynstr	: { *(.dynstr)		}
+  .rel.text	: { *(.rel.text)	}
+  .rela.text	: { *(.rela.text) 	}
+  .rel.data	: { *(.rel.data)	}
+  .rela.data	: { *(.rela.data) 	}
+  .rel.rodata	: { *(.rel.rodata) 	}
+  .rela.rodata	: { *(.rela.rodata) 	}
+  .rel.got	: { *(.rel.got)		}
+  .rela.got	: { *(.rela.got)	}
+  .rel.ctors	: { *(.rel.ctors)	}
+  .rela.ctors	: { *(.rela.ctors)	}
+  .rel.dtors	: { *(.rel.dtors)	}
+  .rela.dtors	: { *(.rela.dtors)	}
+  .rel.bss	: { *(.rel.bss)	}
+  .rela.bss	: { *(.rela.bss)	}
+  .rel.plt	: { *(.rel.plt)	}
+  .rela.plt	: { *(.rela.plt)	}
+  .init		: { *(.init)		}
+  .plt : { *(.plt) }
+  . = CFG_MONITOR_BASE;
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector before the environment sector. If it throws 	*/
+    /* an error during compilation remove an object here to get	*/
+    /* it linked after the configuration sector.		*/
+
+    cpu/bf561/start.o		(.text)
+    cpu/bf561/start1.o		(.text)
+    cpu/bf561/traps.o		(.text)
+    cpu/bf561/interrupt.o	(.text)
+    cpu/bf561/serial.o		(.text)
+    common/dlmalloc.o		(.text)
+/*  lib_blackfin/bf533_string.o	(.text) */
+/*  lib_generic/vsprintf.o	(.text) */
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+    board/bf561-ezkit/bf561-ezkit.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  ___u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  ___u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile
new file mode 100644
index 0000000..ee7842a
--- /dev/null
+++ b/cpu/bf561/Makefile
@@ -0,0 +1,52 @@
+# U-boot - Makefile
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o start1.o interrupt.o cache.o flush.o init_sdram.o
+COBJS	= cpu.o traps.o ints.o serial.o interrupts.o video.o
+
+EXTRA = init_sdram_bootrom_initblock.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/bf561/cache.S b/cpu/bf561/cache.S
new file mode 100644
index 0000000..5bda5bf
--- /dev/null
+++ b/cpu/bf561/cache.S
@@ -0,0 +1,128 @@
+#define ASSEMBLY
+#include <asm/linkage.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+.align 2
+ENTRY(_blackfin_icache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+	1:
+	IFLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	IFLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_blackfin_dcache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	FLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_icache_invalidate)
+ENTRY(_invalidate_entire_icache)
+	[--SP] = (R7:5);
+
+	P0.L = (IMEM_CONTROL & 0xFFFF);
+	P0.H = (IMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, IMC_P);
+	CLI R6;
+	/* SSYNC required before invalidating cache. */
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:5) =[SP++];
+	RTS;
+
+/*
+ * Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(_invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+	[--SP] = (R7:6);
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the DMC[1:0] bits, All valid bits in the data
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, DMC0_P);
+	BITCLR(R7, DMC1_P);
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+	/* Configures the data cache again */
+
+	R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:6) =[SP++];
+	RTS;
+
+ENTRY(_blackfin_dcache_invalidate_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSHINV[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+
+	/*
+	 * If the data crosses a cache line, then we'll be pointing to
+	 * the last cache line, but won't have flushed/invalidated it yet, so do
+	 * one more.
+	 */
+	FLUSHINV[P0];
+	SSYNC;
+	RTS;
diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk
new file mode 100644
index 0000000..c49a0ba
--- /dev/null
+++ b/cpu/bf561/config.mk
@@ -0,0 +1,27 @@
+# U-boot - config.mk
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5
diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c
new file mode 100644
index 0000000..a7b53d8
--- /dev/null
+++ b/cpu/bf561/cpu.c
@@ -0,0 +1,220 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <command.h>
+#include <asm/entry.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+#define CACHE_ON 1
+#define CACHE_OFF 0
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	__asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM)
+	    );
+
+	return 0;
+}
+
+/* These functions are just used to satisfy the linker */
+int cpu_init(void)
+{
+	return 0;
+}
+
+int cleanup_before_linux(void)
+{
+	return 0;
+}
+
+void icache_enable(void)
+{
+	unsigned int *I0, *I1;
+	int i, j = 0;
+
+	/* Before enable icache, disable it first */
+	icache_disable();
+	I0 = (unsigned int *)ICPLB_ADDR0;
+	I1 = (unsigned int *)ICPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & icplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & icplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+
+	}
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+	sync();
+	sti();
+}
+
+void icache_disable(void)
+{
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+	sync();
+	sti();
+}
+
+int icache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)IMEM_CONTROL;
+
+	if (value & (IMC | ENICPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
+
+void dcache_enable(void)
+{
+	unsigned int *I0, *I1;
+	unsigned int temp;
+	int i, j = 0;
+
+	/* Before enable dcache, disable it first */
+	dcache_disable();
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & dcplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+		} else {
+			debug("skip   %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & dcplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+	}
+
+	cli();
+	temp = *(unsigned int *)DMEM_CONTROL;
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL =
+	    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp;
+	sync();
+	sti();
+}
+
+void dcache_disable(void)
+{
+
+	unsigned int *I0, *I1;
+	int i;
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL &=
+	    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	sync();
+	sti();
+
+	/* after disable dcache, clear it so we don't confuse the next application */
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	for (i = 0; i < 16; i++) {
+		*I0++ = 0x0;
+		*I1++ = 0x0;
+	}
+}
+
+int dcache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)DMEM_CONTROL;
+	if (value & (ENDCPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h
new file mode 100644
index 0000000..821363e
--- /dev/null
+++ b/cpu/bf561/cpu.h
@@ -0,0 +1,66 @@
+/*
+ *  U-boot - cpu.h
+ *
+ *  Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include <command.h>
+
+#define INTERNAL_IRQS (32)
+#define NUM_IRQ_NODES 16
+#define DEF_INTERRUPT_FLAGS 1
+#define MAX_TIM_LOAD	0xFFFFFFFF
+
+void blackfin_irq_panic(int reason, struct pt_regs *reg);
+extern void dump(struct pt_regs *regs);
+void display_excp(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_rst(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+void blackfin_irq_panic(int reason, struct pt_regs *regs);
+void blackfin_free_irq(unsigned int irq, void *dev_id);
+void call_isr(int irq, struct pt_regs *fp);
+void blackfin_do_irq(int vec, struct pt_regs *fp);
+void blackfin_init_IRQ(void);
+void blackfin_enable_irq(unsigned int irq);
+void blackfin_disable_irq(unsigned int irq);
+extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+int blackfin_request_irq(unsigned int irq,
+			 void (*handler) (int, void *, struct pt_regs *),
+			 unsigned long flags, const char *devname,
+			 void *dev_id);
+void timer_init(void);
+#endif
diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S
new file mode 100644
index 0000000..7e12c83
--- /dev/null
+++ b/cpu/bf561/flush.S
@@ -0,0 +1,402 @@
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ */
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/cplb.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the instruction cache.
+ */
+
+ENTRY(_flush_instruction_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (ICPLB_ADDR0 >> 16);
+	P5.L = (ICPLB_ADDR0 & 0xFFFF);
+	P4.H = (ICPLB_DATA0 >> 16);
+	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL;
+	R6 = 16;
+inext:	R0 = [P5++];
+	R1 = [P4++];
+	[--SP] =  RETS;
+	CALL _icplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+iskip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP inext;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular ICPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_icplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP iflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
+
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (ITEST_COMMAND & 0xFFFF);
+	P5.H = (ITEST_COMMAND >> 16);
+	P4.L = (ITEST_DATA0 & 0xFFFF);
+	P4.H = (ITEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 4;
+	LSETUP (ifs1, ife1) LC1 = P2;
+ifs1:	P0 = 32;		/* iterate over all sets*/
+	LSETUP (ifs0, ife0) LC0 = P0;
+ifs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;			/* CSYNC will not work here :(*/
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP ifskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP ifskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	IFLUSH [P3];		/* And flush the entry*/
+ifskip:
+ife0:	R5 += 1;		/* Advance to next Set*/
+ife1:	NOP;
+
+ifinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+iflush_whole_page:
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	IFLUSH [P0++];		/* because CSYNC can't end loops.*/
+	LSETUP (isall, ieall) LC0 = P1;
+isall:IFLUSH [P0++];
+ieall: NOP;
+	SSYNC;
+	JUMP ifinished;
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the data cache.
+ */
+
+ENTRY(_flush_data_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (DCPLB_ADDR0 >> 16);
+	P5.L = (DCPLB_ADDR0 & 0xFFFF);
+	P4.H = (DCPLB_DATA0 >> 16);
+	P4.L = (DCPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z);
+	R6 = 16;
+next:	R0 = [P5++];
+	R1 = [P4++];
+	CC = BITTST(R1, 14);	/* Is it write-through?*/
+	IF CC JUMP skip;	/* If so, ignore it.*/
+	R2 = R1 & R7;		/* Is it a dirty, cached page?*/
+	CC = R2;
+	IF !CC JUMP skip;	/* If not, ignore it.*/
+	[--SP] = RETS;
+	CALL _dcplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+skip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP next;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular DCPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_dcplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP dflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* The page could be mapped into Bank A or Bank B, depending
+	 * on (a) whether both banks are configured as cache, and
+	 * (b) on whether address bit A[x] is set. x is determined
+	 * by DCBS in DMEM_CONTROL
+	 */
+
+	R2 = 0;			/* Default to Bank A (Bank B would be 1)*/
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+
+	R3 = [P0];		/* If Bank B is not enabled as cache*/
+	CC = BITTST(R3, 2);	/* then Bank A is our only option.*/
+	IF CC JUMP bank_chosen;
+
+	R4 = 1<<14;		/* If DCBS==0, use A[14].*/
+	R5 = R4 << 7;		/* If DCBS==1, use A[23];*/
+	CC = BITTST(R3, 4);
+	IF CC R4 = R5;		/* R4 now has either bit 14 or bit 23 set.*/
+	R5 = R0 & R4;		/* Use it to test the Page address*/
+	CC = R5;		/* and if that bit is set, we use Bank B,*/
+	R2 = CC;		/* else we use Bank A.*/
+	R2 <<= 23;		/* The Bank selection's at posn 23.*/
+
+bank_chosen:
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	/* Save in extraction pattern for later deposit.*/
+	R3.H = R4.L << 0;
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R2 = Bank select mask
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (DTEST_COMMAND & 0xFFFF);
+	P5.H = (DTEST_COMMAND >> 16);
+	P4.L = (DTEST_DATA0 & 0xFFFF);
+	P4.H = (DTEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 2;
+	LSETUP (fs1, fe1) LC1 = P2;
+fs1:	P0 = 64;		/* iterate over all sets*/
+	LSETUP (fs0, fe0) LC0 = P0;
+fs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	R6 = R6 | R2;		/* and Bank. Leave Way==0 at first.*/
+	BITSET(R6,14);
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+	CC = BITTST(R7, 1);	/* Check if dirty*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP fskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	SSYNC;
+	FLUSHINV [P3];		/* And flush the entry*/
+fskip:
+fe0:	R5 += 1;		/* Advance to next Set*/
+fe1:	BITSET(R2, 26);		/* Go to next Way.*/
+
+dfinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+dflush_whole_page:
+
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
+	LSETUP (eall, eall) LC0 = P1;
+eall:	FLUSHINV [P0++];
+	SSYNC;
+	JUMP dfinished;
+
+.align 4;
+page_prefix_table:
+.byte4 	0xFFFFFC00;	/* 1K */
+.byte4	0xFFFFF000;	/* 4K */
+.byte4	0xFFF00000;	/* 1M */
+.byte4	0xFFC00000;	/* 4M */
+.page_prefix_table.end:
diff --git a/cpu/bf561/init_sdram.S b/cpu/bf561/init_sdram.S
new file mode 100644
index 0000000..d763f27
--- /dev/null
+++ b/cpu/bf561/init_sdram.S
@@ -0,0 +1,171 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS	   : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN	   : 1=All Clocks off
+	 *   - [3]     = STOPCK	   : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	   : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over, */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2? */
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;
diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S
new file mode 100644
index 0000000..5e3c88a
--- /dev/null
+++ b/cpu/bf561/init_sdram_bootrom_initblock.S
@@ -0,0 +1,185 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV	CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+
+	p0.h = hi(SICA_IWR0);
+	p0.l = lo(SICA_IWR0);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD_INITBLOCK;
+	w[p0] = r0.l;
+	SSYNC;
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN	   : 1=All Clocks off
+	 *   - [3]     = STOPCK	   : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	   : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over, */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2? */
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;
diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S
new file mode 100644
index 0000000..f82fd9b
--- /dev/null
+++ b/cpu/bf561/interrupt.S
@@ -0,0 +1,246 @@
+/*
+ * U-boot - interrupt.S Processing of interrupts and exception handling
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on interrupt.S
+ *
+ * Copyright (C) 2003	Metrowerks, Inc. <mwaddel@metrowerks.com>
+ * Copyright (C) 2002	Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca>
+ * Copyright (C) 1998	D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *			Kenneth Albanowski <kjahds@kjahds.com>,
+ *			The Silver Hammer Group, Ltd.
+ *
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * This file is also based on exception.asm
+ * (C) Copyright 2001-2005 - Analog Devices, Inc.  All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/hw_irq.h>
+#include <asm/entry.h>
+#include <asm/blackfin_defs.h>
+
+.global _blackfin_irq_panic;
+
+.text
+.align 2
+
+#ifndef CONFIG_KGDB
+.global _evt_emulation
+_evt_emulation:
+	SAVE_CONTEXT
+	r0 = IRQ_EMU;
+	r1 = seqstat;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+	rte;
+#endif
+
+.global _evt_nmi
+_evt_nmi:
+	SAVE_CONTEXT
+	r0 = IRQ_NMI;
+	r1 = RETN;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+_evt_nmi_exit:
+	rtn;
+
+.global _trap
+_trap:
+	SAVE_ALL_SYS
+	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
+	sp += -12;
+	call _trap_c
+	sp += 12;
+	RESTORE_ALL_SYS
+	rtx;
+
+.global _evt_rst
+_evt_rst:
+	SAVE_CONTEXT
+	r0 = IRQ_RST;
+	r1 = RETN;
+	sp += -12;
+	call _do_reset;
+	sp += 12;
+
+_evt_rst_exit:
+	rtn;
+
+irq_panic:
+	r0 = IRQ_EVX;
+	r1 =  sp;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+.global _evt_ivhw
+_evt_ivhw:
+	SAVE_CONTEXT
+	RAISE 14;
+
+_evt_ivhw_exit:
+	 rti;
+
+.global _evt_timer
+_evt_timer:
+	SAVE_CONTEXT
+	r0 = IRQ_CORETMR;
+	sp += -12;
+	/* Polling method used now. */
+	/* call timer_int; */
+	sp += 12;
+	RESTORE_CONTEXT
+	rti;
+	nop;
+
+.global _evt_evt7
+_evt_evt7:
+	SAVE_CONTEXT
+	r0 = 7;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt7_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt8
+_evt_evt8:
+	SAVE_CONTEXT
+	r0 = 8;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt8_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt9
+_evt_evt9:
+	SAVE_CONTEXT
+	r0 = 9;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt9_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt10
+_evt_evt10:
+	SAVE_CONTEXT
+	r0 = 10;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt10_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt11
+_evt_evt11:
+	SAVE_CONTEXT
+	r0 = 11;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt11_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt12
+_evt_evt12:
+	SAVE_CONTEXT
+	r0 = 12;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+evt_evt12_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_evt13
+_evt_evt13:
+	SAVE_CONTEXT
+	r0 = 13;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt13_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_system_call
+_evt_system_call:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_system_call_exit:
+	rti;
+
+.global _evt_soft_int1
+_evt_soft_int1:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_soft_int1_exit:
+	rti;
diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c
new file mode 100644
index 0000000..e314f60
--- /dev/null
+++ b/cpu/bf561/interrupts.c
@@ -0,0 +1,171 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ *			BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags;			/* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On BF561 it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On BF561 it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
+
+void enable_interrupts(void)
+{
+	restore_flags(int_flag);
+}
+
+int disable_interrupts(void)
+{
+	save_and_cli(int_flag);
+	return 1;
+}
+
+int interrupt_init(void)
+{
+	return (0);
+}
+
+void udelay(unsigned long usec)
+{
+	unsigned long delay, start, stop;
+	unsigned long cclk;
+	cclk = (CONFIG_CCLK_HZ);
+
+	while (usec > 1) {
+		/*
+		 * how many clock ticks to delay?
+		 *  - request(in useconds) * clock_ticks(Hz) / useconds/second
+		 */
+		if (usec < 1000) {
+			delay = (usec * (cclk / 244)) >> 12;
+			usec = 0;
+		} else {
+			delay = (1000 * (cclk / 244)) >> 12;
+			usec -= 1000;
+		}
+
+		asm volatile (" %0 = CYCLES;":"=r" (start));
+		do {
+			asm volatile (" %0 = CYCLES; ":"=r" (stop));
+		} while (stop - start < delay);
+	}
+
+	return;
+}
+
+void timer_init(void)
+{
+	*pTCNTL = 0x1;
+	*pTSCALE = 0x0;
+	*pTCOUNT = MAX_TIM_LOAD;
+	*pTPERIOD = MAX_TIM_LOAD;
+	*pTCNTL = 0x7;
+	asm("CSYNC;");
+
+	timestamp = 0;
+	last_time = 0;
+}
+
+/*
+ * Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ * As get_timer is used in the u-boot
+ * only for timeouts this should be
+ * sufficient
+ */
+ulong get_timer(ulong base)
+{
+	ulong milisec;
+
+	/* Number of clocks elapsed */
+	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
+
+	/*
+	 * Find if the TCOUNT is reset
+	 * timestamp gives the number of times
+	 * TCOUNT got reset
+	 */
+	if (clocks < last_time)
+		timestamp++;
+	last_time = clocks;
+
+	/* Get the number of milliseconds */
+	milisec = clocks / (CONFIG_CCLK_HZ / 1000);
+
+	/*
+	 * Find the number of millisonds
+	 * that got elapsed before this TCOUNT
+	 * cycle
+	 */
+	milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
+
+	return (milisec - base);
+}
diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c
new file mode 100644
index 0000000..328e5d8
--- /dev/null
+++ b/cpu/bf561/ints.c
@@ -0,0 +1,117 @@
+/*
+ * U-boot - ints.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on ints.c
+ *
+ * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin
+ *	drivers
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/stddef.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+void blackfin_irq_panic(int reason, struct pt_regs *regs)
+{
+	printf("\n\nException: IRQ 0x%x entered\n", reason);
+	printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+	printf("stack frame=0x%x, ", (unsigned int)regs);
+	printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+	dump(regs);
+	printf("Unhandled IRQ or exceptions!\n");
+	printf("Please reset the board \n");
+}
+
+void blackfin_init_IRQ(void)
+{
+	*(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL;
+	cli();
+#ifndef CONFIG_KGDB
+	*(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0;
+#endif
+	*(unsigned volatile long *)(EVT_NMI_ADDR) =
+	    (unsigned volatile long)evt_nmi;
+	*(unsigned volatile long *)(EVT_EXCEPTION_ADDR) =
+	    (unsigned volatile long)trap;
+	*(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) =
+	    (unsigned volatile long)evt_ivhw;
+	*(unsigned volatile long *)(EVT_RESET_ADDR) =
+	    (unsigned volatile long)evt_rst;
+	*(unsigned volatile long *)(EVT_TIMER_ADDR) =
+	    (unsigned volatile long)evt_timer;
+	*(unsigned volatile long *)(EVT_IVG7_ADDR) =
+	    (unsigned volatile long)evt_evt7;
+	*(unsigned volatile long *)(EVT_IVG8_ADDR) =
+	    (unsigned volatile long)evt_evt8;
+	*(unsigned volatile long *)(EVT_IVG9_ADDR) =
+	    (unsigned volatile long)evt_evt9;
+	*(unsigned volatile long *)(EVT_IVG10_ADDR) =
+	    (unsigned volatile long)evt_evt10;
+	*(unsigned volatile long *)(EVT_IVG11_ADDR) =
+	    (unsigned volatile long)evt_evt11;
+	*(unsigned volatile long *)(EVT_IVG12_ADDR) =
+	    (unsigned volatile long)evt_evt12;
+	*(unsigned volatile long *)(EVT_IVG13_ADDR) =
+	    (unsigned volatile long)evt_evt13;
+	*(unsigned volatile long *)(EVT_IVG14_ADDR) =
+	    (unsigned volatile long)evt_system_call;
+	*(unsigned volatile long *)(EVT_IVG15_ADDR) =
+	    (unsigned volatile long)evt_soft_int1;
+	*(volatile unsigned long *)ILAT = 0;
+	asm("csync;");
+	sti();
+	*(volatile unsigned long *)IMASK = 0xffbf;
+	asm("csync;");
+}
+
+void exception_handle(void)
+{
+#if defined (CONFIG_PANIC_HANG)
+	display_excp();
+#else
+	udelay(100000);		/* allow messages to go out */
+	do_reset(NULL, 0, 0, NULL);
+#endif
+}
+
+void display_excp(void)
+{
+	printf("Exception!\n");
+}
diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c
new file mode 100644
index 0000000..baec1d3
--- /dev/null
+++ b/cpu/bf561/serial.c
@@ -0,0 +1,196 @@
+/*
+ * U-boot - serial.c Serial driver for BF561
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
+ * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on blkfinserial.c
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
+ * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
+ * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include "serial.h"
+#include <asm/io.h>
+
+unsigned long pll_div_fact;
+
+void calc_baud(void)
+{
+	unsigned char i;
+	int temp;
+	u_long sclk = get_sclk();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		temp = sclk / (baud_table[i] * 8);
+		if ((temp & 0x1) == 1) {
+			temp++;
+		}
+		temp = temp / 2;
+		hw_baud_table[i].dl_high = (temp >> 8) & 0xFF;
+		hw_baud_table[i].dl_low = (temp) & 0xFF;
+	}
+}
+
+void serial_setbrg(void)
+{
+	int i;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	calc_baud();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		if (gd->baudrate == baud_table[i])
+			break;
+	}
+
+	/* Enable UART */
+	*pUART_GCTL |= UART_GCTL_UCEN;
+	sync();
+
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH;
+	sync();
+
+	*pUART_DLL = hw_baud_table[i].dl_low;
+	sync();
+	*pUART_DLH = hw_baud_table[i].dl_high;
+	sync();
+
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER;
+	sync();
+
+	/*
+	 * Enable  ERBFI and ELSI interrupts
+	 * to poll SIC_ISR register
+	 */
+	*pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI;
+	sync();
+
+	/* Set LCR to Word Lengh 8-bit word select */
+	*pUART_LCR = UART_LCR_WLS8;
+	sync();
+
+	return;
+}
+
+int serial_init(void)
+{
+	serial_setbrg();
+	return (0);
+}
+
+void serial_putc(const char c)
+{
+	if ((*pUART_LSR) & UART_LSR_TEMT) {
+		if (c == '\n')
+			serial_putc('\r');
+
+		local_put_char(c);
+	}
+
+	while (!((*pUART_LSR) & UART_LSR_TEMT))
+		SYNC_ALL;
+
+	return;
+}
+
+int serial_tstc(void)
+{
+	if (*pUART_LSR & UART_LSR_DR)
+		return 1;
+	else
+		return 0;
+}
+
+int serial_getc(void)
+{
+	unsigned short uart_lsr_val, uart_rbr_val;
+	unsigned long isr_val;
+	int ret;
+
+	/* Poll for RX Interrupt */
+	while (!((isr_val =
+		  *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ;
+	asm("csync;");
+
+	uart_lsr_val = *pUART_LSR;	/* Clear status bit */
+	uart_rbr_val = *pUART_RBR;	/* getc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		ret = -1;
+	} else {
+		ret = uart_rbr_val & 0xff;
+	}
+
+	return ret;
+}
+
+void serial_puts(const char *s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+static void local_put_char(char ch)
+{
+	int flags = 0;
+	unsigned long isr_val;
+
+	save_and_cli(flags);
+
+	/* Poll for TX Interruput */
+	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ;
+	asm("csync;");
+
+	*pUART_THR = ch;	/* putc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		printf("?");
+	}
+
+	restore_flags(flags);
+
+	return;
+}
diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h
new file mode 100644
index 0000000..98c1242
--- /dev/null
+++ b/cpu/bf561/serial.h
@@ -0,0 +1,77 @@
+/*
+ * U-boot - bf561_serial.h Serial Driver defines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
+ * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
+ *
+ * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
+ * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328serial.c which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _Bf561_SERIAL_H
+#define _Bf561_SERIAL_H
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+
+#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
+#define ACCESS_LATCH	*pUART_LCR |= UART_LCR_DLAB;
+#define ACCESS_PORT_IER	*pUART_LCR &= (~UART_LCR_DLAB);
+
+void serial_setbrg(void);
+static void local_put_char(char ch);
+void calc_baud(void);
+void serial_setbrg(void);
+int serial_init(void);
+void serial_putc(const char c);
+int serial_tstc(void);
+int serial_getc(void);
+void serial_puts(const char *s);
+static void local_put_char(char ch);
+
+int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 };
+
+struct {
+	unsigned char dl_high;
+	unsigned char dl_low;
+} hw_baud_table[5];
+
+#ifdef CONFIG_STAMP
+extern unsigned long pll_div_fact;
+#endif
+
+#endif
diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S
new file mode 100644
index 0000000..9333648
--- /dev/null
+++ b/cpu/bf561/start.S
@@ -0,0 +1,311 @@
+/*
+ * U-boot - start.S Startup file of u-boot for BF533/BF561
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003  Metrowerks/Motorola
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *		       Kenneth Albanowski <kjahds@kjahds.com>,
+ *		       The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Note: A change in this file subsequently requires a change in
+ *       board/$(board_name)/config.mk for a valid u-boot.bin
+ */
+
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.global _stext;
+.global __bss_start;
+.global start;
+.global _start;
+.global _rambase;
+.global _ramstart;
+.global _ramend;
+.global edata;
+.global _initialize;
+.global _exit;
+.global flashdataend;
+.global init_sdram;
+
+.text
+_start:
+start:
+_stext:
+
+	R0 = 0x32;
+	SYSCFG = R0;
+	SSYNC;
+
+	/*
+	 * As per HW reference manual DAG registers,
+	 * DATA and Address resgister shall be zero'd
+	 * in initialization, after a reset state
+	 */
+	r1 = 0;	/* Data registers zero'd */
+	r2 = 0;
+	r3 = 0;
+	r4 = 0;
+	r5 = 0;
+	r6 = 0;
+	r7 = 0;
+
+	p0 = 0; /* Address registers zero'd */
+	p1 = 0;
+	p2 = 0;
+	p3 = 0;
+	p4 = 0;
+	p5 = 0;
+
+	i0 = 0; /* DAG Registers zero'd */
+	i1 = 0;
+	i2 = 0;
+	i3 = 0;
+	m0 = 0;
+	m1 = 0;
+	m3 = 0;
+	m3 = 0;
+	l0 = 0;
+	l1 = 0;
+	l2 = 0;
+	l3 = 0;
+	b0 = 0;
+	b1 = 0;
+	b2 = 0;
+	b3 = 0;
+
+	/*
+	 * Set loop counters to zero, to make sure that
+	 * hw loops are disabled.
+	 */
+	r0  = 0;
+	lc0 = r0;
+	lc1 = r0;
+
+	SSYNC;
+
+	/* Check soft reset status */
+	p0.h = SWRST >> 16;
+	p0.l = SWRST & 0xFFFF;
+	r0.l = w[p0];
+
+	cc = bittst(r0, 15);
+	if !cc jump no_soft_reset;
+
+	/* Clear Soft reset */
+	r0 = 0x0000;
+	w[p0] = r0;
+	ssync;
+
+no_soft_reset:
+	nop;
+
+	/* Clear EVT registers */
+	p0.h = (EVT_EMULATION_ADDR >> 16);
+	p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
+	p0 += 8;
+	p1 = 14;
+	r1 = 0;
+	LSETUP(4,4) lc0 = p1;
+	[ p0 ++ ] = r1;
+
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	sp.l = (0xffb01000 & 0xFFFF);
+	sp.h = (0xffb01000 >> 16);
+
+	/*
+	 * Check if the code is in SDRAM
+	 * If the code is in SDRAM, skip SDRAM initializaiton
+	 */
+	call get_pc;
+	r3.l = 0x0;
+	r3.h = 0x2000;
+	cc = r0 < r3 (iu);
+	if cc jump sdram_initialized;
+	call init_sdram;
+	/* relocate into to RAM */
+sdram_initialized:
+	call get_pc;
+offset:
+	r2.l = offset;
+	r2.h = offset;
+	r3.l = start;
+	r3.h = start;
+	r1 = r2 - r3;
+
+	r0 = r0 - r1;
+	p1 = r0;
+
+	p2.l = (CFG_MONITOR_BASE & 0xffff);
+	p2.h = (CFG_MONITOR_BASE >> 16);
+
+	p3 = 0x04;
+	p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
+	p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
+loop1:
+	r1 = [p1 ++ p3];
+	[p2 ++ p3] = r1;
+	cc=p2==p4;
+	if !cc jump loop1;
+	/*
+	 * configure STACK
+	 */
+	r0.h = (CONFIG_STACKBASE >> 16);
+	r0.l = (CONFIG_STACKBASE & 0xFFFF);
+	sp = r0;
+	fp = sp;
+
+	/*
+	 * This next section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* To keep ourselves in the supervisor mode */
+	p0.l = (EVT_IVG15_ADDR & 0xFFFF);
+	p0.h = (EVT_IVG15_ADDR >> 16);
+
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+
+	p0.l = (IMASK & 0xFFFF);
+	p0.h = (IMASK >> 16);
+	r0.l = LO(IVG15_POS);
+	r0.h = HI(IVG15_POS);
+	[p0] = r0;
+	raise 15;
+	p0.l = WAIT_HERE;
+	p0.h = WAIT_HERE;
+	reti = p0;
+	rti;
+
+WAIT_HERE:
+	jump WAIT_HERE;
+
+.global _real_start;
+_real_start:
+	[ -- sp ] = reti;
+
+#ifdef CONFIG_EZKIT561
+	p0.l = (WDOG_CTL & 0xFFFF);
+	p0.h = (WDOG_CTL >> 16);
+	r0 = WATCHDOG_DISABLE(z);
+	w[p0] = r0;
+#endif
+
+	/* DMA reset code to Hi of L1 SRAM */
+copy:
+	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.L = lo(SYSMMR_BASE);
+
+	R0.H = reset_start;	/* Source Address (high) */
+	R0.L = reset_start;	/* Source Address (low) */
+	R1.H = reset_end;
+	R1.L = reset_end;
+	R2 = R1 - R0;		/* Count */
+	R1.H = hi(L1_ISRAM);	/* Destination Address (high) */
+	R1.L = lo(L1_ISRAM);	/* Destination Address (low) */
+	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+
+DMA:
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+WAIT_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump WAIT_DMA_DONE
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
+
+	/* Initialize BSS Section with 0 s */
+	p1.l = __bss_start;
+	p1.h = __bss_start;
+	p2.l = _end;
+	p2.h = _end;
+	r1 = p1;
+	r2 = p2;
+	r3 = r2 - r1;
+	r3 = r3 >> 2;
+	p3 = r3;
+	lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
+	CC = p2<=p1;
+	if CC jump _clear_bss_skip;
+	r0 = 0;
+_clear_bss:
+_clear_bss_end:
+	[p1++] = r0;
+_clear_bss_skip:
+
+	p0.l = _start1;
+	p0.h = _start1;
+	jump (p0);
+
+reset_start:
+	p0.h = WDOG_CNT >> 16;
+	p0.l = WDOG_CNT & 0xffff;
+	r0 = 0x0010;
+	w[p0] = r0;
+	p0.h = WDOG_CTL >> 16;
+	p0.l = WDOG_CTL & 0xffff;
+	r0 = 0x0000;
+	w[p0] = r0;
+reset_wait:
+	jump reset_wait;
+
+reset_end: nop;
+
+_exit:
+	jump.s	_exit;
+get_pc:
+	r0 = rets;
+	rts;
diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S
new file mode 100644
index 0000000..72cfafb
--- /dev/null
+++ b/cpu/bf561/start1.S
@@ -0,0 +1,38 @@
+/*
+ * U-boot - start1.S Code running out of RAM after relocation
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.global	start1;
+.global	_start1;
+
+.text
+_start1:
+start1:
+	sp += -12;
+	call	_board_init_f;
+	sp += 12;
diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c
new file mode 100644
index 0000000..f5ff3a8
--- /dev/null
+++ b/cpu/bf561/traps.c
@@ -0,0 +1,239 @@
+/*
+ * U-boot - traps.c Routines related to interrupts and exceptions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * No original Copyright holder listed,
+ * Probabily original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 2003 Metrowerks - for Blackfin
+ * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include "cpu.h"
+#include <asm/arch/anomaly.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+void init_IRQ(void)
+{
+	blackfin_init_IRQ();
+	return;
+}
+
+void process_int(unsigned long vec, struct pt_regs *fp)
+{
+	printf("interrupt\n");
+	return;
+}
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+unsigned long last_cplb_fault_retx;
+
+static unsigned int cplb_sizes[4] =
+    { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 };
+
+void trap_c(struct pt_regs *regs)
+{
+	unsigned int addr;
+	unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE;
+	unsigned int i, j, size, *I0, *I1;
+	unsigned short data = 0;
+
+	switch (trapnr) {
+		/* 0x26 - Data CPLB Miss */
+	case VEC_CPLB_M:
+
+#ifdef ANOMALY_05000261
+		/*
+		 * Work around an anomaly: if we see a new DCPLB fault, return
+		 * without doing anything.  Then, if we get the same fault again,
+		 * handle it.
+		 */
+		addr = last_cplb_fault_retx;
+		last_cplb_fault_retx = regs->retx;
+		printf("this time, curr = 0x%08x last = 0x%08x\n", addr,
+		       last_cplb_fault_retx);
+		if (addr != last_cplb_fault_retx)
+			goto trap_c_return;
+#endif
+		data = 1;
+
+	case VEC_CPLB_I_M:
+
+		if (data)
+			addr = *pDCPLB_FAULT_ADDR;
+		else
+			addr = *pICPLB_FAULT_ADDR;
+
+		for (i = 0; i < page_descriptor_table_size; i++) {
+			if (data) {
+				size = cplb_sizes[dcplb_table[i][1] >> 16];
+				j = dcplb_table[i][0];
+			} else {
+				size = cplb_sizes[icplb_table[i][1] >> 16];
+				j = icplb_table[i][0];
+			}
+			if ((j <= addr) && ((j + size) > addr)) {
+				debug("found %i 0x%08x\n", i, j);
+				break;
+			}
+		}
+		if (i == page_descriptor_table_size) {
+			printf("something is really wrong\n");
+			do_reset(NULL, 0, 0, NULL);
+		}
+
+		/* Turn the cache off */
+		if (data) {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL &=
+			    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+			sync();
+		}
+
+		if (data) {
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		j = 0;
+		while (*I1 & CPLB_LOCK) {
+			debug("skipping %i %08p - %08x\n", j, I1, *I1);
+			*I0++;
+			*I1++;
+			j++;
+		}
+
+		debug("remove %i 0x%08x  0x%08x\n", j, *I0, *I1);
+
+		for (; j < 15; j++) {
+			debug("replace %i 0x%08x  0x%08x\n", j, I0, I0 + 1);
+			*I0++ = *(I0 + 1);
+			*I1++ = *(I1 + 1);
+		}
+
+		if (data) {
+			*I0 = dcplb_table[i][0];
+			*I1 = dcplb_table[i][1];
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			*I0 = icplb_table[i][0];
+			*I1 = icplb_table[i][1];
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		for (j = 0; j < 16; j++) {
+			debug("%i 0x%08x  0x%08x\n", j, *I0++, *I1++);
+		}
+
+		/* Turn the cache back on */
+		if (data) {
+			j = *(unsigned int *)DMEM_CONTROL;
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL =
+			    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j;
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+			sync();
+		}
+
+		break;
+	default:
+		/* All traps come here */
+		printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+		printf("stack frame=0x%x, ", (unsigned int)regs);
+		printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+		dump(regs);
+		printf("\n\n");
+
+		printf("Unhandled IRQ or exceptions!\n");
+		printf("Please reset the board \n");
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+trap_c_return:
+	return;
+
+}
+
+void dump(struct pt_regs *fp)
+{
+	debug("RETE:  %08lx  RETN: %08lx  RETX: %08lx  RETS: %08lx\n", fp->rete,
+	      fp->retn, fp->retx, fp->rets);
+	debug("IPEND: %04lx  SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
+	debug("SEQSTAT: %08lx    SP: %08lx\n", (long)fp->seqstat, (long)fp);
+	debug("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n", fp->r0,
+	      fp->r1, fp->r2, fp->r3);
+	debug("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n", fp->r4,
+	      fp->r5, fp->r6, fp->r7);
+	debug("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n", fp->p0,
+	      fp->p1, fp->p2, fp->p3);
+	debug("P4: %08lx    P5: %08lx    FP: %08lx\n", fp->p4, fp->p5, fp->fp);
+	debug("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
+	      fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	debug("LB0: %08lx  LT0: %08lx  LC0: %08lx\n", fp->lb0, fp->lt0,
+	      fp->lc0);
+	debug("LB1: %08lx  LT1: %08lx  LC1: %08lx\n", fp->lb1, fp->lt1,
+	      fp->lc1);
+	debug("B0: %08lx  L0: %08lx  M0: %08lx  I0: %08lx\n", fp->b0, fp->l0,
+	      fp->m0, fp->i0);
+	debug("B1: %08lx  L1: %08lx  M1: %08lx  I1: %08lx\n", fp->b1, fp->l1,
+	      fp->m1, fp->i1);
+	debug("B2: %08lx  L2: %08lx  M2: %08lx  I2: %08lx\n", fp->b2, fp->l2,
+	      fp->m2, fp->i2);
+	debug("B3: %08lx  L3: %08lx  M3: %08lx  I3: %08lx\n", fp->b3, fp->l3,
+	      fp->m3, fp->i3);
+
+	debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR);
+	debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR);
+
+}
diff --git a/cpu/bf561/video.c b/cpu/bf561/video.c
new file mode 100644
index 0000000..3ff0151
--- /dev/null
+++ b/cpu/bf561/video.c
@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ * (C) Copyright 2002
+ * Wolfgang Denk, wd@denx.de
+ * (C) Copyright 2006
+ * Aubrey Li, aubrey.li@analog.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+#ifdef CONFIG_VIDEO
+#define NTSC_FRAME_ADDR 0x06000000
+#include "video.h"
+
+/* NTSC OUTPUT SIZE  720 * 240 */
+#define VERTICAL	2
+#define HORIZONTAL	4
+
+int is_vblank_line(const int line)
+{
+	/*
+	 *  This array contains a single bit for each line in
+	 *  an NTSC frame.
+	 */
+	if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528))
+		return true;
+
+	return false;
+}
+
+int NTSC_framebuffer_init(char *base_address)
+{
+	const int NTSC_frames = 1;
+	const int NTSC_lines = 525;
+	char *dest = base_address;
+	int frame_num, line_num;
+
+	for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) {
+		for (line_num = 1; line_num <= NTSC_lines; ++line_num) {
+			unsigned int code;
+			int offset = 0;
+			int i;
+
+			if (is_vblank_line(line_num))
+				offset++;
+
+			if (line_num > 266 || line_num < 3)
+				offset += 2;
+
+			/* Output EAV code */
+			code = SystemCodeMap[offset].EAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output horizontal blanking */
+			for (i = 0; i < 67 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+
+			/* Output SAV */
+			code = SystemCodeMap[offset].SAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output empty horizontal data */
+			for (i = 0; i < 360 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+		}
+	}
+
+	return dest - base_address;
+}
+
+void fill_frame(char *Frame, int Value)
+{
+	int *OddPtr32;
+	int OddLine;
+	int *EvenPtr32;
+	int EvenLine;
+	int i;
+	int *data;
+	int m, n;
+
+	/* fill odd and even frames */
+	for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) {
+		OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276);
+		EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276);
+		for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) {
+			*OddPtr32 = Value;
+			*EvenPtr32 = Value;
+		}
+	}
+
+	for (m = 0; m < VERTICAL; m++) {
+		data = (int *)u_boot_logo.data;
+		for (OddLine = (22 + m), EvenLine = (285 + m);
+		     OddLine < (u_boot_logo.height * VERTICAL) + (22 + m);
+		     OddLine += VERTICAL, EvenLine += VERTICAL) {
+			OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276);
+			EvenPtr32 =
+			    (int *)((Frame + ((EvenLine) * 1716)) + 276);
+			for (i = 0; i < u_boot_logo.width / 2; i++) {
+				/* enlarge one pixel to m x n */
+				for (n = 0; n < HORIZONTAL; n++) {
+					*OddPtr32++ = *data;
+					*EvenPtr32++ = *data;
+				}
+				data++;
+			}
+		}
+	}
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+static int video_init(void)
+{
+	char *NTSCFrame;
+	NTSCFrame = (char *)NTSC_FRAME_ADDR;
+	NTSC_framebuffer_init(NTSCFrame);
+	fill_frame(NTSCFrame, BLUE);
+
+	*pPPI_CONTROL = 0x0082;
+	*pPPI_FRAME = 0x020D;
+
+	*pDMA0_START_ADDR = NTSCFrame;
+	*pDMA0_X_COUNT = 0x035A;
+	*pDMA0_X_MODIFY = 0x0002;
+	*pDMA0_Y_COUNT = 0x020D;
+	*pDMA0_Y_MODIFY = 0x0002;
+	*pDMA0_CONFIG = 0x1015;
+	*pPPI_CONTROL = 0x0083;
+	return 0;
+}
+
+int drv_video_init(void)
+{
+	int error, devices = 1;
+
+	device_t videodev;
+
+	video_init();		/* Video initialization */
+
+	memset(&videodev, 0, sizeof(videodev));
+
+	strcpy(videodev.name, "video");
+	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
+	videodev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
+	videodev.putc = video_putc;	/* 'putc' function */
+	videodev.puts = video_puts;	/* 'puts' function */
+
+	error = device_register(&videodev);
+
+	return (error == 0) ? devices : error;
+}
+#endif
diff --git a/cpu/bf561/video.h b/cpu/bf561/video.h
new file mode 100644
index 0000000..d237f6a
--- /dev/null
+++ b/cpu/bf561/video.h
@@ -0,0 +1,25 @@
+#include <video_logo.h>
+#define write_dest_byte(val) {*dest++=val;}
+#define BLACK   (0x01800180)	/* black pixel pattern  */
+#define BLUE    (0x296E29F0)	/* blue pixel pattern   */
+#define RED     (0x51F0515A)	/* red pixel pattern    */
+#define MAGENTA (0x6ADE6ACA)	/* magenta pixel pattern */
+#define GREEN   (0x91229136)	/* green pixel pattern  */
+#define CYAN    (0xAA10AAA6)	/* cyan pixel pattern   */
+#define YELLOW  (0xD292D210)	/* yellow pixel pattern */
+#define WHITE   (0xFE80FE80)	/* white pixel pattern  */
+
+#define true 	1
+#define false	0
+
+typedef struct {
+	unsigned int SAV;
+	unsigned int EAV;
+} SystemCodeType;
+
+const SystemCodeType SystemCodeMap[4] = {
+	{0xFF000080, 0xFF00009D},
+	{0xFF0000AB, 0xFF0000B6},
+	{0xFF0000C7, 0xFF0000DA},
+	{0xFF0000EC, 0xFF0000F1}
+};
diff --git a/include/asm-blackfin/arch-bf561/anomaly.h b/include/asm-blackfin/arch-bf561/anomaly.h
new file mode 100644
index 0000000..467649b
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/anomaly.h
@@ -0,0 +1,181 @@
+/*
+ * File:	include/asm-blackfin/arch-bf561/anomaly.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:	Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * This file shoule be up to date with:
+ *  - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.4 silicon - sorry */
+#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4))
+#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4
+#endif
+
+/* Issues that are common to 0.5 and  0.3 silicon */
+#if  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000074	/* A multi issue instruction with dsp32shiftimm in
+				   slot1 and store of a P register in slot 2 is not
+				   supported */
+#define ANOMALY_05000099	/* UART Line Status Register (UART_LSR) bits are not
+				   updated at the same time. */
+#define ANOMALY_05000120	/* Testset instructions restricted to 32-bit aligned
+				   memory locations */
+#define ANOMALY_05000122	/* Rx.H cannot be used to access 16-bit System MMR
+				   registers */
+#define ANOMALY_05000127	/* Signbits instruction not functional under certain
+				   conditions */
+#define ANOMALY_05000149	/* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000166	/* PPI Data Lengths Between 8 and 16 do not zero out
+				   upper bits */
+#define ANOMALY_05000167	/* Turning Serial Ports on With External Frame Syncs */
+#define ANOMALY_05000180	/* PPI_DELAY not functional in PPI modes with 0 frame
+				   syncs */
+#define ANOMALY_05000182	/* IMDMA does not operate to full speed for 600MHz
+				   and higher devices */
+#define ANOMALY_05000187	/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000190	/* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000208	/* VSTAT status bit in PLL_STAT register is not
+				   functional */
+#define ANOMALY_05000245	/* Spurious Hardware Error from an access in the
+				   shadow of a conditional branch */
+#define ANOMALY_05000257	/* Interrupt/Exception during short hardware loop
+				   may cause bad instruction fetches */
+#define ANOMALY_05000265	/* Sensitivity to noise with slow input edge rates on
+				   external SPORT TX and RX clocks */
+#define ANOMALY_05000267	/* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000269	/* High I/O activity causes output voltage of internal
+				   voltage regulator (VDDint) to increase */
+#define ANOMALY_05000270	/* High I/O activity causes output voltage of internal
+				   voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000272	/* Certain data cache write through modes fail for
+				   VDDint <=0.9V */
+#define ANOMALY_05000274	/* Data cache write back to external synchronous memory
+				   may be lost */
+#define ANOMALY_05000275	/* PPI Timing and sampling informaton updates */
+#endif				/*  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
+
+#if  (defined(CONFIG_BF_REV_0_5))
+#define ANOMALY_05000254	/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
+				   mode with external clock */
+#define ANOMALY_05000266	/* IMDMA destination IRQ status must be read prior to
+				   using IMDMA */
+#endif
+
+#if  (defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000156	/* Timers in PWM-Out Mode with PPI GP Receive (Input)
+				   Mode with 0 Frame Syncs */
+#define ANOMALY_05000168	/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000169	/* DATA CPLB page miss can result in lost write-through
+				   cache data writes */
+#define ANOMALY_05000171	/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000174	/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000175	/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000176	/* Multiplication of (-1) by (-1) followed by an
+				   accumulator saturation */
+#define ANOMALY_05000179	/* PPI_COUNT cannot be programmed to 0 in General
+				   Purpose TX or RX modes */
+#define ANOMALY_05000181	/* Disabling the PPI resets the PPI configuration
+				   registers */
+#define ANOMALY_05000184	/* Timer Pin limitations for PPI TX Modes with
+				   External Frame Syncs */
+#define ANOMALY_05000185	/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000186	/* PPI packing with Data Length greater than 8 bits
+				   (not a meaningful mode) */
+#define ANOMALY_05000188	/* IMDMA Restrictions on Descriptor and Buffer
+				   Placement in Memory */
+#define ANOMALY_05000189	/* False Protection Exception */
+#define ANOMALY_05000193	/* False Flag Pin Interrupts on Edge Sensitive Inputs
+				   when polarity setting is changed */
+#define ANOMALY_05000194	/* Restarting SPORT in specific modes may cause data
+				   corruption */
+#define ANOMALY_05000198	/* Failing MMR accesses when stalled by preceding
+				   memory read */
+#define ANOMALY_05000199	/* DMA current address shows wrong value during carry
+				   fix */
+#define ANOMALY_05000200	/* SPORT TFS and DT are incorrectly driven during
+				   inactive channels in certain conditions */
+#define ANOMALY_05000202	/* Possible infinite stall with specific dual-DAG
+				   situation */
+#define ANOMALY_05000204	/* Incorrect data read with write-through cache and
+				   allocate cache lines on reads only mode */
+#define ANOMALY_05000205	/* Specific sequence that can cause DMA error or DMA
+				   stopping */
+#define ANOMALY_05000207	/* Recovery from "brown-out" condition */
+#define ANOMALY_05000209	/* Speed-Path in computational unit affects certain
+				   instructions */
+#define ANOMALY_05000215	/* UART TX Interrupt masked erroneously */
+#define ANOMALY_05000219	/* NMI event at boot time results in unpredictable
+				   state */
+#define ANOMALY_05000220	/* Data Corruption with Cached External Memory and
+				   Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000225	/* Incorrect pulse-width of UART start-bit */
+#define ANOMALY_05000227	/* Scratchpad memory bank reads may return incorrect
+				   data */
+#define ANOMALY_05000230	/* UART Receiver is less robust against Baudrate
+				   Differences in certain Conditions */
+#define ANOMALY_05000231	/* UART STB bit incorrectly affects receiver setting */
+#define ANOMALY_05000232	/* SPORT data transmit lines are incorrectly driven in
+				   multichannel mode */
+#define ANOMALY_05000242	/* DF bit in PLL_CTL register does not respond to
+				   hardware reset */
+#define ANOMALY_05000244	/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
+				   Control causes failures */
+#define ANOMALY_05000248	/* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000250	/* Incorrect Bit-Shift of Data Word in Multichannel
+				   (TDM) mode in certain conditions */
+#define ANOMALY_05000251	/* Exception not generated for MMR accesses in
+				   reserved region */
+#define ANOMALY_05000253	/* Maximum external clock speed for Timers */
+#define ANOMALY_05000258	/* Instruction Cache is corrupted when bits 9 and 12
+				   of the ICPLB Data registers differ */
+#define ANOMALY_05000260	/* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000261	/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000262	/* Stores to data cache may be lost */
+#define ANOMALY_05000263	/* Hardware loop corrupted when taking an ICPLB
+				   exception */
+#define ANOMALY_05000264	/* CSYNC/SSYNC/IDLE causes infinite stall in second
+				   to last instruction in hardware loop */
+#define ANOMALY_05000276	/* Timing requirements change for External Frame
+				   Sync PPI Modes with non-zero PPI_DELAY */
+#define ANOMALY_05000278	/* Disabling Peripherals with DMA running may cause
+				   DMA system instability */
+#define ANOMALY_05000281	/* False Hardware Error Exception when ISR context is
+				   not restored */
+#define ANOMALY_05000283	/* An MMR write is stalled indefinitely when killed
+				   in a particular stage */
+#define ANOMALY_05000287	/* A read will receive incorrect data under certain
+				   conditions */
+#define ANOMALY_05000288	/* SPORTs may receive bad data if FIFOs fill up */
+#endif
+
+#endif				/* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h
new file mode 100644
index 0000000..0810228
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/bf561_serial.h
@@ -0,0 +1,78 @@
+/*
+ * U-boot bf561_serial.h
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _BF561_SERIAL_H_
+#define _BF561_SERIAL_H_
+
+#define BYTE_REF(addr)		(*((volatile char*)addr))
+#define HALFWORD_REF(addr)	(*((volatile short*)addr))
+#define WORD_REF(addr)		(*((volatile long*)addr))
+
+#define UART_THR_LO		HALFWORD_REF(UART_THR)
+#define UART_RBR_LO		HALFWORD_REF(UART_RBR)
+#define UART_DLL_LO		HALFWORD_REF(UART_DLL)
+#define UART_IER_LO		HALFWORD_REF(UART_IER)
+#define UART_IER_ERBFI		0x01
+#define UART_IER_ETBEI		0x02
+#define UART_IER_ELSI		0x04
+#define UART_IER_EDDSI		0x08
+
+#define UART_DLH_LO		HALFWORD_REF(UART_DLH)
+#define UART_IIR_LO		HALFWORD_REF(UART_IIR)
+#define UART_IIR_NOINT		0x01
+#define UART_IIR_STATUS		0x06
+#define UART_IIR_LSR		0x06
+#define UART_IIR_RBR		0x04
+#define UART_IIR_THR		0x02
+#define UART_IIR_MSR		0x00
+
+#define UART_LCR_LO		HALFWORD_REF(UART_LCR)
+#define UART_LCR_WLS5		0
+#define UART_LCR_WLS6		0x01
+#define UART_LCR_WLS7		0x02
+#define UART_LCR_WLS8		0x03
+#define UART_LCR_STB		0x04
+#define UART_LCR_PEN		0x08
+#define UART_LCR_EPS		0x10
+#define UART_LCR_SP		0x20
+#define UART_LCR_SB		0x40
+#define UART_LCR_DLAB		0x80
+
+#define UART_MCR_LO		HALFWORD_REF(UART_MCR)
+
+#define UART_LSR_LO		HALFWORD_REF(UART_LSR)
+#define UART_LSR_DR		0x01
+#define UART_LSR_OE		0x02
+#define UART_LSR_PE		0x04
+#define UART_LSR_FE		0x08
+#define UART_LSR_BI		0x10
+#define UART_LSR_THRE		0x20
+#define UART_LSR_TEMT		0x40
+
+#define UART_MSR_LO		HALFWORD_REF(UART_MSR)
+#define UART_SCR_LO		HALFWORD_REF(UART_SCR)
+#define UART_GCTL_LO		HALFWORD_REF(UART_GCTL)
+#define UART_GCTL_UCEN		0x01
+
+#endif
diff --git a/include/asm-blackfin/arch-bf561/cdefBF561.h b/include/asm-blackfin/arch-bf561/cdefBF561.h
new file mode 100644
index 0000000..f217ba7
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/cdefBF561.h
@@ -0,0 +1,998 @@
+/*
+ * cdefBF561.h
+ *
+ * (c) Copyright 2001-2004 Analog Devices, Inc.  All rights reserved.
+ *
+ */
+
+/* C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */
+
+#ifndef _CDEF_BF561_H
+#define _CDEF_BF561_H
+
+/*
+ * #if !defined(__ADSPBF561__)
+ * #warning cdefBF561.h should only be included for BF561 chip.
+ * #endif
+ */
+
+/* include all Core registers and bit definitions */
+#include <asm/arch-bf561/defBF561.h>
+#include <asm/arch-common/cdef_LPBlackfin.h>
+
+/*
+ * System MMR Register Map
+ */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define pPLL_CTL		(volatile unsigned short *)PLL_CTL
+#define pPLL_DIV		(volatile unsigned short *)PLL_DIV
+#define pVR_CTL			(volatile unsigned short *)VR_CTL
+#define pPLL_STAT		(volatile unsigned short *)PLL_STAT
+#define pPLL_LOCKCNT		(volatile unsigned short *)PLL_LOCKCNT
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * core A (0xFFC0 0100-0xFFC0 01FF)
+ */
+#define pSICA_SWRST		(volatile unsigned short *)SICA_SWRST
+#define pSICA_SYSCR		(volatile unsigned short *)SICA_SYSCR
+#define pSICA_RVECT		(volatile unsigned short *)SICA_RVECT
+#define pSICA_IMASK		(volatile unsigned long *)SICA_IMASK
+#define pSICA_IMASK0		(volatile unsigned long *)SICA_IMASK0
+#define pSICA_IMASK1		(volatile unsigned long *)SICA_IMASK1
+#define pSICA_IAR0		(volatile unsigned long *)SICA_IAR0
+#define pSICA_IAR1		(volatile unsigned long *)SICA_IAR1
+#define pSICA_IAR2		(volatile unsigned long *)SICA_IAR2
+#define pSICA_IAR3		(volatile unsigned long *)SICA_IAR3
+#define pSICA_IAR4		(volatile unsigned long *)SICA_IAR4
+#define pSICA_IAR5		(volatile unsigned long *)SICA_IAR5
+#define pSICA_IAR6		(volatile unsigned long *)SICA_IAR6
+#define pSICA_IAR7		(volatile unsigned long *)SICA_IAR7
+#define pSICA_ISR0		(volatile unsigned long *)SICA_ISR0
+#define pSICA_ISR1		(volatile unsigned long *)SICA_ISR1
+#define pSICA_IWR0		(volatile unsigned long *)SICA_IWR0
+#define pSICA_IWR1		(volatile unsigned long *)SICA_IWR1
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * Core B (0xFFC0 1100-0xFFC0 11FF)
+ */
+#define pSICB_SWRST		(volatile unsigned short *)SICB_SWRST
+#define pSICB_SYSCR		(volatile unsigned short *)SICB_SYSCR
+#define pSICB_RVECT		(volatile unsigned short *)SICB_RVECT
+#define pSICB_IMASK0		(volatile unsigned long *)SICB_IMASK0
+#define pSICB_IMASK1		(volatile unsigned long *)SICB_IMASK1
+#define pSICB_IAR0		(volatile unsigned long *)SICB_IAR0
+#define pSICB_IAR1		(volatile unsigned long *)SICB_IAR1
+#define pSICB_IAR2		(volatile unsigned long *)SICB_IAR2
+#define pSICB_IAR3		(volatile unsigned long *)SICB_IAR3
+#define pSICB_IAR4		(volatile unsigned long *)SICB_IAR4
+#define pSICB_IAR5		(volatile unsigned long *)SICB_IAR5
+#define pSICB_IAR6		(volatile unsigned long *)SICB_IAR6
+#define pSICB_IAR7		(volatile unsigned long *)SICB_IAR7
+#define pSICB_ISR0		(volatile unsigned long *)SICB_ISR0
+#define pSICB_ISR1		(volatile unsigned long *)SICB_ISR1
+#define pSICB_IWR0		(volatile unsigned long *)SICB_IWR0
+#define pSICB_IWR1		(volatile unsigned long *)SICB_IWR1
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define pWDOGA_CTL		(volatile unsigned short *)WDOGA_CTL
+#define pWDOGA_CNT		(volatile unsigned long *)WDOGA_CNT
+#define pWDOGA_STAT		(volatile unsigned long *)WDOGA_STAT
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define pWDOGB_CTL		(volatile unsigned short *)WDOGB_CTL
+#define pWDOGB_CNT		(volatile unsigned long *)WDOGB_CNT
+#define pWDOGB_STAT		(volatile unsigned long *)WDOGB_STAT
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define pUART_THR		(volatile unsigned short *)UART_THR
+#define pUART_RBR		(volatile unsigned short *)UART_RBR
+#define pUART_DLL		(volatile unsigned short *)UART_DLL
+#define pUART_IER		(volatile unsigned short *)UART_IER
+#define pUART_DLH		(volatile unsigned short *)UART_DLH
+#define pUART_IIR		(volatile unsigned short *)UART_IIR
+#define pUART_LCR		(volatile unsigned short *)UART_LCR
+#define pUART_MCR		(volatile unsigned short *)UART_MCR
+#define pUART_LSR		(volatile unsigned short *)UART_LSR
+#define pUART_MSR		(volatile unsigned short *)UART_MSR
+#define pUART_SCR		(volatile unsigned short *)UART_SCR
+#define pUART_GCTL		(volatile unsigned short *)UART_GCTL
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define pSPI_CTL		(volatile unsigned short *)SPI_CTL
+#define pSPI_FLG		(volatile unsigned short *)SPI_FLG
+#define pSPI_STAT		(volatile unsigned short *)SPI_STAT
+#define pSPI_TDBR		(volatile unsigned short *)SPI_TDBR
+#define pSPI_RDBR		(volatile unsigned short *)SPI_RDBR
+#define pSPI_BAUD		(volatile unsigned short *)SPI_BAUD
+#define pSPI_SHADOW		(volatile unsigned short *)SPI_SHADOW
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define pTIMER0_CONFIG		(volatile unsigned short *)TIMER0_CONFIG
+#define pTIMER0_COUNTER		(volatile unsigned long *)TIMER0_COUNTER
+#define pTIMER0_PERIOD		(volatile unsigned long *)TIMER0_PERIOD
+#define pTIMER0_WIDTH		(volatile unsigned long *)TIMER0_WIDTH
+#define pTIMER1_CONFIG		(volatile unsigned short *)TIMER1_CONFIG
+#define pTIMER1_COUNTER		(volatile unsigned long *)TIMER1_COUNTER
+#define pTIMER1_PERIOD		(volatile unsigned long *)TIMER1_PERIOD
+#define pTIMER1_WIDTH		(volatile unsigned long *)TIMER1_WIDTH
+#define pTIMER2_CONFIG		(volatile unsigned short *)TIMER2_CONFIG
+#define pTIMER2_COUNTER		(volatile unsigned long *)TIMER2_COUNTER
+#define pTIMER2_PERIOD		(volatile unsigned long *)TIMER2_PERIOD
+#define pTIMER2_WIDTH		(volatile unsigned long *)TIMER2_WIDTH
+#define pTIMER3_CONFIG		(volatile unsigned short *)TIMER3_CONFIG
+#define pTIMER3_COUNTER		(volatile unsigned long *)TIMER3_COUNTER
+#define pTIMER3_PERIOD		(volatile unsigned long *)TIMER3_PERIOD
+#define pTIMER3_WIDTH		(volatile unsigned long *)TIMER3_WIDTH
+#define pTIMER4_CONFIG		(volatile unsigned short *)TIMER4_CONFIG
+#define pTIMER4_COUNTER		(volatile unsigned long *)TIMER4_COUNTER
+#define pTIMER4_PERIOD		(volatile unsigned long *)TIMER4_PERIOD
+#define pTIMER4_WIDTH		(volatile unsigned long *)TIMER4_WIDTH
+#define pTIMER5_CONFIG		(volatile unsigned short *)TIMER5_CONFIG
+#define pTIMER5_COUNTER		(volatile unsigned long *)TIMER5_COUNTER
+#define pTIMER5_PERIOD		(volatile unsigned long *)TIMER5_PERIOD
+#define pTIMER5_WIDTH		(volatile unsigned long *)TIMER5_WIDTH
+#define pTIMER6_CONFIG		(volatile unsigned short *)TIMER6_CONFIG
+#define pTIMER6_COUNTER		(volatile unsigned long *)TIMER6_COUNTER
+#define pTIMER6_PERIOD		(volatile unsigned long *)TIMER6_PERIOD
+#define pTIMER6_WIDTH		(volatile unsigned long *)TIMER6_WIDTH
+#define pTIMER7_CONFIG		(volatile unsigned short *)TIMER7_CONFIG
+#define pTIMER7_COUNTER		(volatile unsigned long *)TIMER7_COUNTER
+#define pTIMER7_PERIOD		(volatile unsigned long *)TIMER7_PERIOD
+#define pTIMER7_WIDTH		(volatile unsigned long *)TIMER7_WIDTH
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define pTMRS8_ENABLE		(volatile unsigned short *)TMRS8_ENABLE
+#define pTMRS8_DISABLE		(volatile unsigned short *)TMRS8_DISABLE
+#define pTMRS8_STATUS		(volatile unsigned long *)TMRS8_STATUS
+#define pTIMER8_CONFIG		(volatile unsigned short *)TIMER8_CONFIG
+#define pTIMER8_COUNTER		(volatile unsigned long *)TIMER8_COUNTER
+#define pTIMER8_PERIOD		(volatile unsigned long *)TIMER8_PERIOD
+#define pTIMER8_WIDTH		(volatile unsigned long *)TIMER8_WIDTH
+#define pTIMER9_CONFIG		(volatile unsigned short *)TIMER9_CONFIG
+#define pTIMER9_COUNTER		(volatile unsigned long *)TIMER9_COUNTER
+#define pTIMER9_PERIOD		(volatile unsigned long *)TIMER9_PERIOD
+#define pTIMER9_WIDTH		(volatile unsigned long *)TIMER9_WIDTH
+#define pTIMER10_CONFIG		(volatile unsigned short *)TIMER10_CONFIG
+#define pTIMER10_COUNTER	(volatile unsigned long *)TIMER10_COUNTER
+#define pTIMER10_PERIOD		(volatile unsigned long *)TIMER10_PERIOD
+#define pTIMER10_WIDTH		(volatile unsigned long *)TIMER10_WIDTH
+#define pTIMER11_CONFIG		(volatile unsigned short *)TIMER11_CONFIG
+#define pTIMER11_COUNTER	(volatile unsigned long *)TIMER11_COUNTER
+#define pTIMER11_PERIOD		(volatile unsigned long *)TIMER11_PERIOD
+#define pTIMER11_WIDTH		(volatile unsigned long *)TIMER11_WIDTH
+#define pTMRS4_ENABLE		(volatile unsigned short *)TMRS4_ENABLE
+#define pTMRS4_DISABLE		(volatile unsigned short *)TMRS4_DISABLE
+#define pTMRS4_STATUS		(volatile unsigned long *)TMRS4_STATUS
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define pFIO0_FLAG_D		(volatile unsigned short *)FIO0_FLAG_D
+#define pFIO0_FLAG_C		(volatile unsigned short *)FIO0_FLAG_C
+#define pFIO0_FLAG_S		(volatile unsigned short *)FIO0_FLAG_S
+#define pFIO0_FLAG_T		(volatile unsigned short *)FIO0_FLAG_T
+#define pFIO0_MASKA_D		(volatile unsigned short *)FIO0_MASKA_D
+#define pFIO0_MASKA_C		(volatile unsigned short *)FIO0_MASKA_C
+#define pFIO0_MASKA_S		(volatile unsigned short *)FIO0_MASKA_S
+#define pFIO0_MASKA_T		(volatile unsigned short *)FIO0_MASKA_T
+#define pFIO0_MASKB_D		(volatile unsigned short *)FIO0_MASKB_D
+#define pFIO0_MASKB_C		(volatile unsigned short *)FIO0_MASKB_C
+#define pFIO0_MASKB_S		(volatile unsigned short *)FIO0_MASKB_S
+#define pFIO0_MASKB_T		(volatile unsigned short *)FIO0_MASKB_T
+#define pFIO0_DIR		(volatile unsigned short *)FIO0_DIR
+#define pFIO0_POLAR		(volatile unsigned short *)FIO0_POLAR
+#define pFIO0_EDGE		(volatile unsigned short *)FIO0_EDGE
+#define pFIO0_BOTH		(volatile unsigned short *)FIO0_BOTH
+#define pFIO0_INEN		(volatile unsigned short *)FIO0_INEN
+
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define pFIO1_FLAG_D		(volatile unsigned short *)FIO1_FLAG_D
+#define pFIO1_FLAG_C		(volatile unsigned short *)FIO1_FLAG_C
+#define pFIO1_FLAG_S		(volatile unsigned short *)FIO1_FLAG_S
+#define pFIO1_FLAG_T		(volatile unsigned short *)FIO1_FLAG_T
+#define pFIO1_MASKA_D		(volatile unsigned short *)FIO1_MASKA_D
+#define pFIO1_MASKA_C		(volatile unsigned short *)FIO1_MASKA_C
+#define pFIO1_MASKA_S		(volatile unsigned short *)FIO1_MASKA_S
+#define pFIO1_MASKA_T		(volatile unsigned short *)FIO1_MASKA_T
+#define pFIO1_MASKB_D		(volatile unsigned short *)FIO1_MASKB_D
+#define pFIO1_MASKB_C		(volatile unsigned short *)FIO1_MASKB_C
+#define pFIO1_MASKB_S		(volatile unsigned short *)FIO1_MASKB_S
+#define pFIO1_MASKB_T		(volatile unsigned short *)FIO1_MASKB_T
+#define pFIO1_DIR		(volatile unsigned short *)FIO1_DIR
+#define pFIO1_POLAR		(volatile unsigned short *)FIO1_POLAR
+#define pFIO1_EDGE		(volatile unsigned short *)FIO1_EDGE
+#define pFIO1_BOTH		(volatile unsigned short *)FIO1_BOTH
+#define pFIO1_INEN		(volatile unsigned short *)FIO1_INEN
+
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define pFIO2_FLAG_D		(volatile unsigned short *)FIO2_FLAG_D
+#define pFIO2_FLAG_C		(volatile unsigned short *)FIO2_FLAG_C
+#define pFIO2_FLAG_S		(volatile unsigned short *)FIO2_FLAG_S
+#define pFIO2_FLAG_T		(volatile unsigned short *)FIO2_FLAG_T
+#define pFIO2_MASKA_D		(volatile unsigned short *)FIO2_MASKA_D
+#define pFIO2_MASKA_C		(volatile unsigned short *)FIO2_MASKA_C
+#define pFIO2_MASKA_S		(volatile unsigned short *)FIO2_MASKA_S
+#define pFIO2_MASKA_T		(volatile unsigned short *)FIO2_MASKA_T
+#define pFIO2_MASKB_D		(volatile unsigned short *)FIO2_MASKB_D
+#define pFIO2_MASKB_C		(volatile unsigned short *)FIO2_MASKB_C
+#define pFIO2_MASKB_S		(volatile unsigned short *)FIO2_MASKB_S
+#define pFIO2_MASKB_T		(volatile unsigned short *)FIO2_MASKB_T
+#define pFIO2_DIR		(volatile unsigned short *)FIO2_DIR
+#define pFIO2_POLAR		(volatile unsigned short *)FIO2_POLAR
+#define pFIO2_EDGE		(volatile unsigned short *)FIO2_EDGE
+#define pFIO2_BOTH		(volatile unsigned short *)FIO2_BOTH
+#define pFIO2_INEN		(volatile unsigned short *)FIO2_INEN
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define pSPORT0_TCR1		(volatile unsigned short *)SPORT0_TCR1
+#define pSPORT0_TCR2		(volatile unsigned short *)SPORT0_TCR2
+#define pSPORT0_TCLKDIV		(volatile unsigned short *)SPORT0_TCLKDIV
+#define pSPORT0_TFSDIV		(volatile unsigned short *)SPORT0_TFSDIV
+#define pSPORT0_TX		(volatile unsigned long *)SPORT0_TX
+#define pSPORT0_RX		(volatile unsigned long *)SPORT0_RX
+#define pSPORT0_TX32		((volatile long *)SPORT0_TX)
+#define pSPORT0_RX32		((volatile long *)SPORT0_RX)
+#define pSPORT0_TX16		((volatile unsigned short *)SPORT0_TX)
+#define pSPORT0_RX16		((volatile unsigned short *)SPORT0_RX)
+#define pSPORT0_RCR1		(volatile unsigned short *)SPORT0_RCR1
+#define pSPORT0_RCR2		(volatile unsigned short *)SPORT0_RCR2
+#define pSPORT0_RCLKDIV		(volatile unsigned short *)SPORT0_RCLKDIV
+#define pSPORT0_RFSDIV		(volatile unsigned short *)SPORT0_RFSDIV
+#define pSPORT0_STAT		(volatile unsigned short *)SPORT0_STAT
+#define pSPORT0_CHNL		(volatile unsigned short *)SPORT0_CHNL
+#define pSPORT0_MCMC1		(volatile unsigned short *)SPORT0_MCMC1
+#define pSPORT0_MCMC2		(volatile unsigned short *)SPORT0_MCMC2
+#define pSPORT0_MTCS0		(volatile unsigned long *)SPORT0_MTCS0
+#define pSPORT0_MTCS1		(volatile unsigned long *)SPORT0_MTCS1
+#define pSPORT0_MTCS2		(volatile unsigned long *)SPORT0_MTCS2
+#define pSPORT0_MTCS3		(volatile unsigned long *)SPORT0_MTCS3
+#define pSPORT0_MRCS0		(volatile unsigned long *)SPORT0_MRCS0
+#define pSPORT0_MRCS1		(volatile unsigned long *)SPORT0_MRCS1
+#define pSPORT0_MRCS2		(volatile unsigned long *)SPORT0_MRCS2
+#define pSPORT0_MRCS3		(volatile unsigned long *)SPORT0_MRCS3
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define pSPORT1_TCR1		(volatile unsigned short *)SPORT1_TCR1
+#define pSPORT1_TCR2		(volatile unsigned short *)SPORT1_TCR2
+#define pSPORT1_TCLKDIV		(volatile unsigned short *)SPORT1_TCLKDIV
+#define pSPORT1_TFSDIV		(volatile unsigned short *)SPORT1_TFSDIV
+#define pSPORT1_TX		(volatile unsigned long *)SPORT1_TX
+#define pSPORT1_RX		(volatile unsigned long *)SPORT1_RX
+#define pSPORT1_TX32		((volatile long *)SPORT1_TX)
+#define pSPORT1_RX32		((volatile long *)SPORT1_RX)
+#define pSPORT1_TX16		((volatile unsigned short *)SPORT1_TX)
+#define pSPORT1_RX16		((volatile unsigned short *)SPORT1_RX)
+#define pSPORT1_RCR1		(volatile unsigned short *)SPORT1_RCR1
+#define pSPORT1_RCR2		(volatile unsigned short *)SPORT1_RCR2
+#define pSPORT1_RCLKDIV		(volatile unsigned short *)SPORT1_RCLKDIV
+#define pSPORT1_RFSDIV		(volatile unsigned short *)SPORT1_RFSDIV
+#define pSPORT1_STAT		(volatile unsigned short *)SPORT1_STAT
+#define pSPORT1_CHNL		(volatile unsigned short *)SPORT1_CHNL
+#define pSPORT1_MCMC1		(volatile unsigned short *)SPORT1_MCMC1
+#define pSPORT1_MCMC2		(volatile unsigned short *)SPORT1_MCMC2
+#define pSPORT1_MTCS0		(volatile unsigned long *)SPORT1_MTCS0
+#define pSPORT1_MTCS1		(volatile unsigned long *)SPORT1_MTCS1
+#define pSPORT1_MTCS2		(volatile unsigned long *)SPORT1_MTCS2
+#define pSPORT1_MTCS3		(volatile unsigned long *)SPORT1_MTCS3
+#define pSPORT1_MRCS0		(volatile unsigned long *)SPORT1_MRCS0
+#define pSPORT1_MRCS1		(volatile unsigned long *)SPORT1_MRCS1
+#define pSPORT1_MRCS2		(volatile unsigned long *)SPORT1_MRCS2
+#define pSPORT1_MRCS3		(volatile unsigned long *)SPORT1_MRCS3
+
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define pEBIU_AMGCTL		(volatile unsigned short *)EBIU_AMGCTL
+#define pEBIU_AMBCTL0		(volatile unsigned long *)EBIU_AMBCTL0
+#define pEBIU_AMBCTL1		(volatile unsigned long *)EBIU_AMBCTL1
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define pEBIU_SDGCTL		(volatile unsigned long *)EBIU_SDGCTL
+#define pEBIU_SDBCTL		(volatile unsigned long *)EBIU_SDBCTL
+#define pEBIU_SDRRC		(volatile unsigned short *)EBIU_SDRRC
+#define pEBIU_SDSTAT		(volatile unsigned short *)EBIU_SDSTAT
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/
+#define pPPI0_CONTROL		(volatile unsigned short *)PPI0_CONTROL
+#define pPPI0_STATUS		(volatile unsigned short *)PPI0_STATUS
+#define pPPI0_COUNT		(volatile unsigned short *)PPI0_COUNT
+#define pPPI0_DELAY		(volatile unsigned short *)PPI0_DELAY
+#define pPPI0_FRAME		(volatile unsigned short *)PPI0_FRAME
+
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/
+#define pPPI1_CONTROL		(volatile unsigned short *)PPI1_CONTROL
+#define pPPI1_STATUS		(volatile unsigned short *)PPI1_STATUS
+#define pPPI1_COUNT		(volatile unsigned short *)PPI1_COUNT
+#define pPPI1_DELAY		(volatile unsigned short *)PPI1_DELAY
+#define pPPI1_FRAME		(volatile unsigned short *)PPI1_FRAME
+
+/*DMA Traffic controls*/
+#define pDMA_TCPER		((volatile unsigned short *)DMA_TCPER)
+#define pDMA_TCCNT		((volatile unsigned short *)DMA_TCCNT)
+#define pDMA_TC_PER		((volatile unsigned short *)DMA_TC_PER)
+#define pDMA_TC_CNT		((volatile unsigned short *)DMA_TC_CNT)
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define pDMA1_0_CONFIG		(volatile unsigned short *)DMA1_0_CONFIG
+#define pDMA1_0_NEXT_DESC_PTR	(volatile void **)DMA1_0_NEXT_DESC_PTR
+#define pDMA1_0_START_ADDR	(volatile void **)DMA1_0_START_ADDR
+#define pDMA1_0_X_COUNT		(volatile unsigned short *)DMA1_0_X_COUNT
+#define pDMA1_0_Y_COUNT		(volatile unsigned short *)DMA1_0_Y_COUNT
+#define pDMA1_0_X_MODIFY	(volatile unsigned short *)DMA1_0_X_MODIFY
+#define pDMA1_0_Y_MODIFY	(volatile unsigned short *)DMA1_0_Y_MODIFY
+#define pDMA1_0_CURR_DESC_PTR	(volatile void **)DMA1_0_CURR_DESC_PTR
+#define pDMA1_0_CURR_ADDR	(volatile void **)DMA1_0_CURR_ADDR
+#define pDMA1_0_CURR_X_COUNT	(volatile unsigned short *)DMA1_0_CURR_X_COUNT
+#define pDMA1_0_CURR_Y_COUNT	(volatile unsigned short *)DMA1_0_CURR_Y_COUNT
+#define pDMA1_0_IRQ_STATUS	(volatile unsigned short *)DMA1_0_IRQ_STATUS
+#define pDMA1_0_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_0_PERIPHERAL_MAP
+#define pDMA1_1_CONFIG		(volatile unsigned short *)DMA1_1_CONFIG
+#define pDMA1_1_NEXT_DESC_PTR	(volatile void **)DMA1_1_NEXT_DESC_PTR
+#define pDMA1_1_START_ADDR	(volatile void **)DMA1_1_START_ADDR
+#define pDMA1_1_X_COUNT		(volatile unsigned short *)DMA1_1_X_COUNT
+#define pDMA1_1_Y_COUNT		(volatile unsigned short *)DMA1_1_Y_COUNT
+#define pDMA1_1_X_MODIFY	(volatile unsigned short *)DMA1_1_X_MODIFY
+#define pDMA1_1_Y_MODIFY	(volatile unsigned short *)DMA1_1_Y_MODIFY
+#define pDMA1_1_CURR_DESC_PTR	(volatile void **)DMA1_1_CURR_DESC_PTR
+#define pDMA1_1_CURR_ADDR	(volatile void **)DMA1_1_CURR_ADDR
+#define pDMA1_1_CURR_X_COUNT	(volatile unsigned short *)DMA1_1_CURR_X_COUNT
+#define pDMA1_1_CURR_Y_COUNT	(volatile unsigned short *)DMA1_1_CURR_Y_COUNT
+#define pDMA1_1_IRQ_STATUS	(volatile unsigned short *)DMA1_1_IRQ_STATUS
+#define pDMA1_1_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_1_PERIPHERAL_MAP
+#define pDMA1_2_CONFIG		(volatile unsigned short *)DMA1_2_CONFIG
+#define pDMA1_2_NEXT_DESC_PTR	(volatile void **)DMA1_2_NEXT_DESC_PTR
+#define pDMA1_2_START_ADDR	(volatile void **)DMA1_2_START_ADDR
+#define pDMA1_2_X_COUNT		(volatile unsigned short *)DMA1_2_X_COUNT
+#define pDMA1_2_Y_COUNT		(volatile unsigned short *)DMA1_2_Y_COUNT
+#define pDMA1_2_X_MODIFY	(volatile unsigned short *)DMA1_2_X_MODIFY
+#define pDMA1_2_Y_MODIFY	(volatile unsigned short *)DMA1_2_Y_MODIFY
+#define pDMA1_2_CURR_DESC_PTR	(volatile void **)DMA1_2_CURR_DESC_PTR
+#define pDMA1_2_CURR_ADDR	(volatile void **)DMA1_2_CURR_ADDR
+#define pDMA1_2_CURR_X_COUNT	(volatile unsigned short *)DMA1_2_CURR_X_COUNT
+#define pDMA1_2_CURR_Y_COUNT	(volatile unsigned short *)DMA1_2_CURR_Y_COUNT
+#define pDMA1_2_IRQ_STATUS	(volatile unsigned short *)DMA1_2_IRQ_STATUS
+#define pDMA1_2_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_2_PERIPHERAL_MAP
+#define pDMA1_3_CONFIG		(volatile unsigned short *)DMA1_3_CONFIG
+#define pDMA1_3_NEXT_DESC_PTR	(volatile void **)DMA1_3_NEXT_DESC_PTR
+#define pDMA1_3_START_ADDR	(volatile void **)DMA1_3_START_ADDR
+#define pDMA1_3_X_COUNT		(volatile unsigned short *)DMA1_3_X_COUNT
+#define pDMA1_3_Y_COUNT		(volatile unsigned short *)DMA1_3_Y_COUNT
+#define pDMA1_3_X_MODIFY	(volatile unsigned short *)DMA1_3_X_MODIFY
+#define pDMA1_3_Y_MODIFY	(volatile unsigned short *)DMA1_3_Y_MODIFY
+#define pDMA1_3_CURR_DESC_PTR	(volatile void **)DMA1_3_CURR_DESC_PTR
+#define pDMA1_3_CURR_ADDR	(volatile void **)DMA1_3_CURR_ADDR
+#define pDMA1_3_CURR_X_COUNT	(volatile unsigned short *)DMA1_3_CURR_X_COUNT
+#define pDMA1_3_CURR_Y_COUNT	(volatile unsigned short *)DMA1_3_CURR_Y_COUNT
+#define pDMA1_3_IRQ_STATUS	(volatile unsigned short *)DMA1_3_IRQ_STATUS
+#define pDMA1_3_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_3_PERIPHERAL_MAP
+#define pDMA1_4_CONFIG		(volatile unsigned short *)DMA1_4_CONFIG
+#define pDMA1_4_NEXT_DESC_PTR	(volatile void **)DMA1_4_NEXT_DESC_PTR
+#define pDMA1_4_START_ADDR	(volatile void **)DMA1_4_START_ADDR
+#define pDMA1_4_X_COUNT		(volatile unsigned short *)DMA1_4_X_COUNT
+#define pDMA1_4_Y_COUNT		(volatile unsigned short *)DMA1_4_Y_COUNT
+#define pDMA1_4_X_MODIFY	(volatile unsigned short *)DMA1_4_X_MODIFY
+#define pDMA1_4_Y_MODIFY	(volatile unsigned short *)DMA1_4_Y_MODIFY
+#define pDMA1_4_CURR_DESC_PTR	(volatile void **)DMA1_4_CURR_DESC_PTR
+#define pDMA1_4_CURR_ADDR	(volatile void **)DMA1_4_CURR_ADDR
+#define pDMA1_4_CURR_X_COUNT	(volatile unsigned short *)DMA1_4_CURR_X_COUNT
+#define pDMA1_4_CURR_Y_COUNT	(volatile unsigned short *)DMA1_4_CURR_Y_COUNT
+#define pDMA1_4_IRQ_STATUS	(volatile unsigned short *)DMA1_4_IRQ_STATUS
+#define pDMA1_4_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_4_PERIPHERAL_MAP
+#define pDMA1_5_CONFIG		(volatile unsigned short *)DMA1_5_CONFIG
+#define pDMA1_5_NEXT_DESC_PTR	(volatile void **)DMA1_5_NEXT_DESC_PTR
+#define pDMA1_5_START_ADDR	(volatile void **)DMA1_5_START_ADDR
+#define pDMA1_5_X_COUNT		(volatile unsigned short *)DMA1_5_X_COUNT
+#define pDMA1_5_Y_COUNT		(volatile unsigned short *)DMA1_5_Y_COUNT
+#define pDMA1_5_X_MODIFY	(volatile unsigned short *)DMA1_5_X_MODIFY
+#define pDMA1_5_Y_MODIFY	(volatile unsigned short *)DMA1_5_Y_MODIFY
+#define pDMA1_5_CURR_DESC_PTR	(volatile void **)DMA1_5_CURR_DESC_PTR
+#define pDMA1_5_CURR_ADDR	(volatile void **)DMA1_5_CURR_ADDR
+#define pDMA1_5_CURR_X_COUNT	(volatile unsigned short *)DMA1_5_CURR_X_COUNT
+#define pDMA1_5_CURR_Y_COUNT	(volatile unsigned short *)DMA1_5_CURR_Y_COUNT
+#define pDMA1_5_IRQ_STATUS	(volatile unsigned short *)DMA1_5_IRQ_STATUS
+#define pDMA1_5_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_5_PERIPHERAL_MAP
+#define pDMA1_6_CONFIG		(volatile unsigned short *)DMA1_6_CONFIG
+#define pDMA1_6_NEXT_DESC_PTR	(volatile void **)DMA1_6_NEXT_DESC_PTR
+#define pDMA1_6_START_ADDR	(volatile void **)DMA1_6_START_ADDR
+#define pDMA1_6_X_COUNT		(volatile unsigned short *)DMA1_6_X_COUNT
+#define pDMA1_6_Y_COUNT		(volatile unsigned short *)DMA1_6_Y_COUNT
+#define pDMA1_6_X_MODIFY	(volatile unsigned short *)DMA1_6_X_MODIFY
+#define pDMA1_6_Y_MODIFY	(volatile unsigned short *)DMA1_6_Y_MODIFY
+#define pDMA1_6_CURR_DESC_PTR	(volatile void **)DMA1_6_CURR_DESC_PTR
+#define pDMA1_6_CURR_ADDR	(volatile void **)DMA1_6_CURR_ADDR
+#define pDMA1_6_CURR_X_COUNT	(volatile unsigned short *)DMA1_6_CURR_X_COUNT
+#define pDMA1_6_CURR_Y_COUNT	(volatile unsigned short *)DMA1_6_CURR_Y_COUNT
+#define pDMA1_6_IRQ_STATUS	(volatile unsigned short *)DMA1_6_IRQ_STATUS
+#define pDMA1_6_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_6_PERIPHERAL_MAP
+#define pDMA1_7_CONFIG		(volatile unsigned short *)DMA1_7_CONFIG
+#define pDMA1_7_NEXT_DESC_PTR	(volatile void **)DMA1_7_NEXT_DESC_PTR
+#define pDMA1_7_START_ADDR	(volatile void **)DMA1_7_START_ADDR
+#define pDMA1_7_X_COUNT		(volatile unsigned short *)DMA1_7_X_COUNT
+#define pDMA1_7_Y_COUNT		(volatile unsigned short *)DMA1_7_Y_COUNT
+#define pDMA1_7_X_MODIFY	(volatile unsigned short *)DMA1_7_X_MODIFY
+#define pDMA1_7_Y_MODIFY	(volatile unsigned short *)DMA1_7_Y_MODIFY
+#define pDMA1_7_CURR_DESC_PTR	(volatile void **)DMA1_7_CURR_DESC_PTR
+#define pDMA1_7_CURR_ADDR	(volatile void **)DMA1_7_CURR_ADDR
+#define pDMA1_7_CURR_X_COUNT	(volatile unsigned short *)DMA1_7_CURR_X_COUNT
+#define pDMA1_7_CURR_Y_COUNT	(volatile unsigned short *)DMA1_7_CURR_Y_COUNT
+#define pDMA1_7_IRQ_STATUS	(volatile unsigned short *)DMA1_7_IRQ_STATUS
+#define pDMA1_7_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_7_PERIPHERAL_MAP
+#define pDMA1_8_CONFIG		(volatile unsigned short *)DMA1_8_CONFIG
+#define pDMA1_8_NEXT_DESC_PTR	(volatile void **)DMA1_8_NEXT_DESC_PTR
+#define pDMA1_8_START_ADDR	(volatile void **)DMA1_8_START_ADDR
+#define pDMA1_8_X_COUNT		(volatile unsigned short *)DMA1_8_X_COUNT
+#define pDMA1_8_Y_COUNT		(volatile unsigned short *)DMA1_8_Y_COUNT
+#define pDMA1_8_X_MODIFY	(volatile unsigned short *)DMA1_8_X_MODIFY
+#define pDMA1_8_Y_MODIFY	(volatile unsigned short *)DMA1_8_Y_MODIFY
+#define pDMA1_8_CURR_DESC_PTR	(volatile void **)DMA1_8_CURR_DESC_PTR
+#define pDMA1_8_CURR_ADDR	(volatile void **)DMA1_8_CURR_ADDR
+#define pDMA1_8_CURR_X_COUNT	(volatile unsigned short *)DMA1_8_CURR_X_COUNT
+#define pDMA1_8_CURR_Y_COUNT	(volatile unsigned short *)DMA1_8_CURR_Y_COUNT
+#define pDMA1_8_IRQ_STATUS	(volatile unsigned short *)DMA1_8_IRQ_STATUS
+#define pDMA1_8_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_8_PERIPHERAL_MAP
+#define pDMA1_9_CONFIG		(volatile unsigned short *)DMA1_9_CONFIG
+#define pDMA1_9_NEXT_DESC_PTR	(volatile void **)DMA1_9_NEXT_DESC_PTR
+#define pDMA1_9_START_ADDR	(volatile void **)DMA1_9_START_ADDR
+#define pDMA1_9_X_COUNT		(volatile unsigned short *)DMA1_9_X_COUNT
+#define pDMA1_9_Y_COUNT		(volatile unsigned short *)DMA1_9_Y_COUNT
+#define pDMA1_9_X_MODIFY	(volatile unsigned short *)DMA1_9_X_MODIFY
+#define pDMA1_9_Y_MODIFY	(volatile unsigned short *)DMA1_9_Y_MODIFY
+#define pDMA1_9_CURR_DESC_PTR	(volatile void **)DMA1_9_CURR_DESC_PTR
+#define pDMA1_9_CURR_ADDR	(volatile void **)DMA1_9_CURR_ADDR
+#define pDMA1_9_CURR_X_COUNT	(volatile unsigned short *)DMA1_9_CURR_X_COUNT
+#define pDMA1_9_CURR_Y_COUNT	(volatile unsigned short *)DMA1_9_CURR_Y_COUNT
+#define pDMA1_9_IRQ_STATUS	(volatile unsigned short *)DMA1_9_IRQ_STATUS
+#define pDMA1_9_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_9_PERIPHERAL_MAP
+#define pDMA1_10_CONFIG		(volatile unsigned short *)DMA1_10_CONFIG
+#define pDMA1_10_NEXT_DESC_PTR	(volatile void **)DMA1_10_NEXT_DESC_PTR
+#define pDMA1_10_START_ADDR	(volatile void **)DMA1_10_START_ADDR
+#define pDMA1_10_X_COUNT	(volatile unsigned short *)DMA1_10_X_COUNT
+#define pDMA1_10_Y_COUNT	(volatile unsigned short *)DMA1_10_Y_COUNT
+#define pDMA1_10_X_MODIFY	(volatile unsigned short *)DMA1_10_X_MODIFY
+#define pDMA1_10_Y_MODIFY	(volatile unsigned short *)DMA1_10_Y_MODIFY
+#define pDMA1_10_CURR_DESC_PTR	(volatile void **)DMA1_10_CURR_DESC_PTR
+#define pDMA1_10_CURR_ADDR	(volatile void **)DMA1_10_CURR_ADDR
+#define pDMA1_10_CURR_X_COUNT	(volatile unsigned short *)DMA1_10_CURR_X_COUNT
+#define pDMA1_10_CURR_Y_COUNT	(volatile unsigned short *)DMA1_10_CURR_Y_COUNT
+#define pDMA1_10_IRQ_STATUS	(volatile unsigned short *)DMA1_10_IRQ_STATUS
+#define pDMA1_10_PERIPHERAL_MAP (volatile unsigned short *)DMA1_10_PERIPHERAL_MAP
+#define pDMA1_11_CONFIG		(volatile unsigned short *)DMA1_11_CONFIG
+#define pDMA1_11_NEXT_DESC_PTR	(volatile void **)DMA1_11_NEXT_DESC_PTR
+#define pDMA1_11_START_ADDR	(volatile void **)DMA1_11_START_ADDR
+#define pDMA1_11_X_COUNT	(volatile unsigned short *)DMA1_11_X_COUNT
+#define pDMA1_11_Y_COUNT	(volatile unsigned short *)DMA1_11_Y_COUNT
+#define pDMA1_11_X_MODIFY	(volatile signed short *)DMA1_11_X_MODIFY
+#define pDMA1_11_Y_MODIFY	(volatile signed short *)DMA1_11_Y_MODIFY
+#define pDMA1_11_CURR_DESC_PTR	(volatile void **)DMA1_11_CURR_DESC_PTR
+#define pDMA1_11_CURR_ADDR	(volatile void **)DMA1_11_CURR_ADDR
+#define pDMA1_11_CURR_X_COUNT	(volatile unsigned short *)DMA1_11_CURR_X_COUNT
+#define pDMA1_11_CURR_Y_COUNT	(volatile unsigned short *)DMA1_11_CURR_Y_COUNT
+#define pDMA1_11_IRQ_STATUS	(volatile unsigned short *)DMA1_11_IRQ_STATUS
+#define pDMA1_11_PERIPHERAL_MAP (volatile unsigned short *)DMA1_11_PERIPHERAL_MAP
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF)*/
+#define pMDMA1_D0_CONFIG	(volatile unsigned short *)MDMA1_D0_CONFIG
+#define pMDMA1_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR
+#define pMDMA1_D0_START_ADDR	(volatile void **)MDMA1_D0_START_ADDR
+#define pMDMA1_D0_X_COUNT	(volatile unsigned short *)MDMA1_D0_X_COUNT
+#define pMDMA1_D0_Y_COUNT	(volatile unsigned short *)MDMA1_D0_Y_COUNT
+#define pMDMA1_D0_X_MODIFY	(volatile signed short *)MDMA1_D0_X_MODIFY
+#define pMDMA1_D0_Y_MODIFY	(volatile signed short *)MDMA1_D0_Y_MODIFY
+#define pMDMA1_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR
+#define pMDMA1_D0_CURR_ADDR	(volatile void **)MDMA1_D0_CURR_ADDR
+#define pMDMA1_D0_CURR_X_COUNT	(volatile unsigned short *)MDMA1_D0_CURR_X_COUNT
+#define pMDMA1_D0_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT
+#define pMDMA1_D0_IRQ_STATUS	(volatile unsigned short *)MDMA1_D0_IRQ_STATUS
+#define pMDMA1_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP
+#define pMDMA1_S0_CONFIG	(volatile unsigned short *)MDMA1_S0_CONFIG
+#define pMDMA1_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR
+#define pMDMA1_S0_START_ADDR	(volatile void **)MDMA1_S0_START_ADDR
+#define pMDMA1_S0_X_COUNT	(volatile unsigned short *)MDMA1_S0_X_COUNT
+#define pMDMA1_S0_Y_COUNT	(volatile unsigned short *)MDMA1_S0_Y_COUNT
+#define pMDMA1_S0_X_MODIFY	(volatile signed short *)MDMA1_S0_X_MODIFY
+#define pMDMA1_S0_Y_MODIFY	(volatile signed short *)MDMA1_S0_Y_MODIFY
+#define pMDMA1_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR
+#define pMDMA1_S0_CURR_ADDR	(volatile void **)MDMA1_S0_CURR_ADDR
+#define pMDMA1_S0_CURR_X_COUNT	(volatile unsigned short *)MDMA1_S0_CURR_X_COUNT
+#define pMDMA1_S0_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT
+#define pMDMA1_S0_IRQ_STATUS	(volatile unsigned short *)MDMA1_S0_IRQ_STATUS
+#define pMDMA1_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP
+#define pMDMA1_D1_CONFIG	(volatile unsigned short *)MDMA1_D1_CONFIG
+#define pMDMA1_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR
+#define pMDMA1_D1_START_ADDR	(volatile void **)MDMA1_D1_START_ADDR
+#define pMDMA1_D1_X_COUNT	(volatile unsigned short *)MDMA1_D1_X_COUNT
+#define pMDMA1_D1_Y_COUNT	(volatile unsigned short *)MDMA1_D1_Y_COUNT
+#define pMDMA1_D1_X_MODIFY	(volatile signed short *)MDMA1_D1_X_MODIFY
+#define pMDMA1_D1_Y_MODIFY	(volatile signed short *)MDMA1_D1_Y_MODIFY
+#define pMDMA1_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR
+#define pMDMA1_D1_CURR_ADDR	(volatile void **)MDMA1_D1_CURR_ADDR
+#define pMDMA1_D1_CURR_X_COUNT	(volatile unsigned short *)MDMA1_D1_CURR_X_COUNT
+#define pMDMA1_D1_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT
+#define pMDMA1_D1_IRQ_STATUS	(volatile unsigned short *)MDMA1_D1_IRQ_STATUS
+#define pMDMA1_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP
+#define pMDMA1_S1_CONFIG	(volatile unsigned short *)MDMA1_S1_CONFIG
+#define pMDMA1_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR
+#define pMDMA1_S1_START_ADDR	(volatile void **)MDMA1_S1_START_ADDR
+#define pMDMA1_S1_X_COUNT	(volatile unsigned short *)MDMA1_S1_X_COUNT
+#define pMDMA1_S1_Y_COUNT	(volatile unsigned short *)MDMA1_S1_Y_COUNT
+#define pMDMA1_S1_X_MODIFY	(volatile signed short *)MDMA1_S1_X_MODIFY
+#define pMDMA1_S1_Y_MODIFY	(volatile signed short *)MDMA1_S1_Y_MODIFY
+#define pMDMA1_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR
+#define pMDMA1_S1_CURR_ADDR	(volatile void **)MDMA1_S1_CURR_ADDR
+#define pMDMA1_S1_CURR_X_COUNT	(volatile unsigned short *)MDMA1_S1_CURR_X_COUNT
+#define pMDMA1_S1_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT
+#define pMDMA1_S1_IRQ_STATUS	(volatile unsigned short *)MDMA1_S1_IRQ_STATUS
+#define pMDMA1_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define pDMA2_0_CONFIG		(volatile unsigned short *)DMA2_0_CONFIG
+#define pDMA2_0_NEXT_DESC_PTR	(volatile void **)DMA2_0_NEXT_DESC_PTR
+#define pDMA2_0_START_ADDR	(volatile void **)DMA2_0_START_ADDR
+#define pDMA2_0_X_COUNT		(volatile unsigned short *)DMA2_0_X_COUNT
+#define pDMA2_0_Y_COUNT		(volatile unsigned short *)DMA2_0_Y_COUNT
+#define pDMA2_0_X_MODIFY	(volatile signed short *)DMA2_0_X_MODIFY
+#define pDMA2_0_Y_MODIFY	(volatile signed short *)DMA2_0_Y_MODIFY
+#define pDMA2_0_CURR_DESC_PTR	(volatile void **)DMA2_0_CURR_DESC_PTR
+#define pDMA2_0_CURR_ADDR	(volatile void **)DMA2_0_CURR_ADDR
+#define pDMA2_0_CURR_X_COUNT	(volatile unsigned short *)DMA2_0_CURR_X_COUNT
+#define pDMA2_0_CURR_Y_COUNT	(volatile unsigned short *)DMA2_0_CURR_Y_COUNT
+#define pDMA2_0_IRQ_STATUS	(volatile unsigned short *)DMA2_0_IRQ_STATUS
+#define pDMA2_0_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_0_PERIPHERAL_MAP
+#define pDMA2_1_CONFIG		(volatile unsigned short *)DMA2_1_CONFIG
+#define pDMA2_1_NEXT_DESC_PTR	(volatile void **)DMA2_1_NEXT_DESC_PTR
+#define pDMA2_1_START_ADDR	(volatile void **)DMA2_1_START_ADDR
+#define pDMA2_1_X_COUNT		(volatile unsigned short *)DMA2_1_X_COUNT
+#define pDMA2_1_Y_COUNT		(volatile unsigned short *)DMA2_1_Y_COUNT
+#define pDMA2_1_X_MODIFY	(volatile signed short *)DMA2_1_X_MODIFY
+#define pDMA2_1_Y_MODIFY	(volatile signed short *)DMA2_1_Y_MODIFY
+#define pDMA2_1_CURR_DESC_PTR	(volatile void **)DMA2_1_CURR_DESC_PTR
+#define pDMA2_1_CURR_ADDR	(volatile void **)DMA2_1_CURR_ADDR
+#define pDMA2_1_CURR_X_COUNT	(volatile unsigned short *)DMA2_1_CURR_X_COUNT
+#define pDMA2_1_CURR_Y_COUNT	(volatile unsigned short *)DMA2_1_CURR_Y_COUNT
+#define pDMA2_1_IRQ_STATUS	(volatile unsigned short *)DMA2_1_IRQ_STATUS
+#define pDMA2_1_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_1_PERIPHERAL_MAP
+#define pDMA2_2_CONFIG		(volatile unsigned short *)DMA2_2_CONFIG
+#define pDMA2_2_NEXT_DESC_PTR	(volatile void **)DMA2_2_NEXT_DESC_PTR
+#define pDMA2_2_START_ADDR	(volatile void **)DMA2_2_START_ADDR
+#define pDMA2_2_X_COUNT		(volatile unsigned short *)DMA2_2_X_COUNT
+#define pDMA2_2_Y_COUNT		(volatile unsigned short *)DMA2_2_Y_COUNT
+#define pDMA2_2_X_MODIFY	(volatile signed short *)DMA2_2_X_MODIFY
+#define pDMA2_2_Y_MODIFY	(volatile signed short *)DMA2_2_Y_MODIFY
+#define pDMA2_2_CURR_DESC_PTR	(volatile void **)DMA2_2_CURR_DESC_PTR
+#define pDMA2_2_CURR_ADDR	(volatile void **)DMA2_2_CURR_ADDR
+#define pDMA2_2_CURR_X_COUNT	(volatile unsigned short *)DMA2_2_CURR_X_COUNT
+#define pDMA2_2_CURR_Y_COUNT	(volatile unsigned short *)DMA2_2_CURR_Y_COUNT
+#define pDMA2_2_IRQ_STATUS	(volatile unsigned short *)DMA2_2_IRQ_STATUS
+#define pDMA2_2_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_2_PERIPHERAL_MAP
+#define pDMA2_3_CONFIG		(volatile unsigned short *)DMA2_3_CONFIG
+#define pDMA2_3_NEXT_DESC_PTR	(volatile void **)DMA2_3_NEXT_DESC_PTR
+#define pDMA2_3_START_ADDR	(volatile void **)DMA2_3_START_ADDR
+#define pDMA2_3_X_COUNT		(volatile unsigned short *)DMA2_3_X_COUNT
+#define pDMA2_3_Y_COUNT		(volatile unsigned short *)DMA2_3_Y_COUNT
+#define pDMA2_3_X_MODIFY	(volatile signed short *)DMA2_3_X_MODIFY
+#define pDMA2_3_Y_MODIFY	(volatile signed short *)DMA2_3_Y_MODIFY
+#define pDMA2_3_CURR_DESC_PTR	(volatile void **)DMA2_3_CURR_DESC_PTR
+#define pDMA2_3_CURR_ADDR	(volatile void **)DMA2_3_CURR_ADDR
+#define pDMA2_3_CURR_X_COUNT	(volatile unsigned short *)DMA2_3_CURR_X_COUNT
+#define pDMA2_3_CURR_Y_COUNT	(volatile unsigned short *)DMA2_3_CURR_Y_COUNT
+#define pDMA2_3_IRQ_STATUS	(volatile unsigned short *)DMA2_3_IRQ_STATUS
+#define pDMA2_3_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_3_PERIPHERAL_MAP
+#define pDMA2_4_CONFIG		(volatile unsigned short *)DMA2_4_CONFIG
+#define pDMA2_4_NEXT_DESC_PTR	(volatile void **)DMA2_4_NEXT_DESC_PTR
+#define pDMA2_4_START_ADDR	(volatile void **)DMA2_4_START_ADDR
+#define pDMA2_4_X_COUNT		(volatile unsigned short *)DMA2_4_X_COUNT
+#define pDMA2_4_Y_COUNT		(volatile unsigned short *)DMA2_4_Y_COUNT
+#define pDMA2_4_X_MODIFY	(volatile signed short *)DMA2_4_X_MODIFY
+#define pDMA2_4_Y_MODIFY	(volatile signed short *)DMA2_4_Y_MODIFY
+#define pDMA2_4_CURR_DESC_PTR	(volatile void **)DMA2_4_CURR_DESC_PTR
+#define pDMA2_4_CURR_ADDR	(volatile void **)DMA2_4_CURR_ADDR
+#define pDMA2_4_CURR_X_COUNT	(volatile unsigned short *)DMA2_4_CURR_X_COUNT
+#define pDMA2_4_CURR_Y_COUNT	(volatile unsigned short *)DMA2_4_CURR_Y_COUNT
+#define pDMA2_4_IRQ_STATUS	(volatile unsigned short *)DMA2_4_IRQ_STATUS
+#define pDMA2_4_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_4_PERIPHERAL_MAP
+#define pDMA2_5_CONFIG		(volatile unsigned short *)DMA2_5_CONFIG
+#define pDMA2_5_NEXT_DESC_PTR	(volatile void **)DMA2_5_NEXT_DESC_PTR
+#define pDMA2_5_START_ADDR	(volatile void **)DMA2_5_START_ADDR
+#define pDMA2_5_X_COUNT		(volatile unsigned short *)DMA2_5_X_COUNT
+#define pDMA2_5_Y_COUNT		(volatile unsigned short *)DMA2_5_Y_COUNT
+#define pDMA2_5_X_MODIFY	(volatile signed short *)DMA2_5_X_MODIFY
+#define pDMA2_5_Y_MODIFY	(volatile signed short *)DMA2_5_Y_MODIFY
+#define pDMA2_5_CURR_DESC_PTR	(volatile void **)DMA2_5_CURR_DESC_PTR
+#define pDMA2_5_CURR_ADDR	(volatile void **)DMA2_5_CURR_ADDR
+#define pDMA2_5_CURR_X_COUNT	(volatile unsigned short *)DMA2_5_CURR_X_COUNT
+#define pDMA2_5_CURR_Y_COUNT	(volatile unsigned short *)DMA2_5_CURR_Y_COUNT
+#define pDMA2_5_IRQ_STATUS	(volatile unsigned short *)DMA2_5_IRQ_STATUS
+#define pDMA2_5_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_5_PERIPHERAL_MAP
+#define pDMA2_6_CONFIG		(volatile unsigned short *)DMA2_6_CONFIG
+#define pDMA2_6_NEXT_DESC_PTR	(volatile void **)DMA2_6_NEXT_DESC_PTR
+#define pDMA2_6_START_ADDR	(volatile void **)DMA2_6_START_ADDR
+#define pDMA2_6_X_COUNT		(volatile unsigned short *)DMA2_6_X_COUNT
+#define pDMA2_6_Y_COUNT		(volatile unsigned short *)DMA2_6_Y_COUNT
+#define pDMA2_6_X_MODIFY	(volatile signed short *)DMA2_6_X_MODIFY
+#define pDMA2_6_Y_MODIFY	(volatile signed short *)DMA2_6_Y_MODIFY
+#define pDMA2_6_CURR_DESC_PTR	(volatile void **)DMA2_6_CURR_DESC_PTR
+#define pDMA2_6_CURR_ADDR	(volatile void **)DMA2_6_CURR_ADDR
+#define pDMA2_6_CURR_X_COUNT	(volatile unsigned short *)DMA2_6_CURR_X_COUNT
+#define pDMA2_6_CURR_Y_COUNT	(volatile unsigned short *)DMA2_6_CURR_Y_COUNT
+#define pDMA2_6_IRQ_STATUS	(volatile unsigned short *)DMA2_6_IRQ_STATUS
+#define pDMA2_6_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_6_PERIPHERAL_MAP
+#define pDMA2_7_CONFIG		(volatile unsigned short *)DMA2_7_CONFIG
+#define pDMA2_7_NEXT_DESC_PTR	(volatile void **)DMA2_7_NEXT_DESC_PTR
+#define pDMA2_7_START_ADDR	(volatile void **)DMA2_7_START_ADDR
+#define pDMA2_7_X_COUNT		(volatile unsigned short *)DMA2_7_X_COUNT
+#define pDMA2_7_Y_COUNT		(volatile unsigned short *)DMA2_7_Y_COUNT
+#define pDMA2_7_X_MODIFY	(volatile signed short *)DMA2_7_X_MODIFY
+#define pDMA2_7_Y_MODIFY	(volatile signed short *)DMA2_7_Y_MODIFY
+#define pDMA2_7_CURR_DESC_PTR	(volatile void **)DMA2_7_CURR_DESC_PTR
+#define pDMA2_7_CURR_ADDR	(volatile void **)DMA2_7_CURR_ADDR
+#define pDMA2_7_CURR_X_COUNT	(volatile unsigned short *)DMA2_7_CURR_X_COUNT
+#define pDMA2_7_CURR_Y_COUNT	(volatile unsigned short *)DMA2_7_CURR_Y_COUNT
+#define pDMA2_7_IRQ_STATUS	(volatile unsigned short *)DMA2_7_IRQ_STATUS
+#define pDMA2_7_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_7_PERIPHERAL_MAP
+#define pDMA2_8_CONFIG		(volatile unsigned short *)DMA2_8_CONFIG
+#define pDMA2_8_NEXT_DESC_PTR	(volatile void **)DMA2_8_NEXT_DESC_PTR
+#define pDMA2_8_START_ADDR	(volatile void **)DMA2_8_START_ADDR
+#define pDMA2_8_X_COUNT		(volatile unsigned short *)DMA2_8_X_COUNT
+#define pDMA2_8_Y_COUNT		(volatile unsigned short *)DMA2_8_Y_COUNT
+#define pDMA2_8_X_MODIFY	(volatile signed short *)DMA2_8_X_MODIFY
+#define pDMA2_8_Y_MODIFY	(volatile signed short *)DMA2_8_Y_MODIFY
+#define pDMA2_8_CURR_DESC_PTR	(volatile void **)DMA2_8_CURR_DESC_PTR
+#define pDMA2_8_CURR_ADDR	(volatile void **)DMA2_8_CURR_ADDR
+#define pDMA2_8_CURR_X_COUNT	(volatile unsigned short *)DMA2_8_CURR_X_COUNT
+#define pDMA2_8_CURR_Y_COUNT	(volatile unsigned short *)DMA2_8_CURR_Y_COUNT
+#define pDMA2_8_IRQ_STATUS	(volatile unsigned short *)DMA2_8_IRQ_STATUS
+#define pDMA2_8_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_8_PERIPHERAL_MAP
+#define pDMA2_9_CONFIG		(volatile unsigned short *)DMA2_9_CONFIG
+#define pDMA2_9_NEXT_DESC_PTR	(volatile void **)DMA2_9_NEXT_DESC_PTR
+#define pDMA2_9_START_ADDR	(volatile void **)DMA2_9_START_ADDR
+#define pDMA2_9_X_COUNT		(volatile unsigned short *)DMA2_9_X_COUNT
+#define pDMA2_9_Y_COUNT		(volatile unsigned short *)DMA2_9_Y_COUNT
+#define pDMA2_9_X_MODIFY	(volatile signed short *)DMA2_9_X_MODIFY
+#define pDMA2_9_Y_MODIFY	(volatile signed short *)DMA2_9_Y_MODIFY
+#define pDMA2_9_CURR_DESC_PTR	(volatile void **)DMA2_9_CURR_DESC_PTR
+#define pDMA2_9_CURR_ADDR	(volatile void **)DMA2_9_CURR_ADDR
+#define pDMA2_9_CURR_X_COUNT	(volatile unsigned short *)DMA2_9_CURR_X_COUNT
+#define pDMA2_9_CURR_Y_COUNT	(volatile unsigned short *)DMA2_9_CURR_Y_COUNT
+#define pDMA2_9_IRQ_STATUS	(volatile unsigned short *)DMA2_9_IRQ_STATUS
+#define pDMA2_9_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_9_PERIPHERAL_MAP
+#define pDMA2_10_CONFIG		(volatile unsigned short *)DMA2_10_CONFIG
+#define pDMA2_10_NEXT_DESC_PTR	(volatile void **)DMA2_10_NEXT_DESC_PTR
+#define pDMA2_10_START_ADDR	(volatile void **)DMA2_10_START_ADDR
+#define pDMA2_10_X_COUNT	(volatile unsigned short *)DMA2_10_X_COUNT
+#define pDMA2_10_Y_COUNT	(volatile unsigned short *)DMA2_10_Y_COUNT
+#define pDMA2_10_X_MODIFY	(volatile signed short *)DMA2_10_X_MODIFY
+#define pDMA2_10_Y_MODIFY	(volatile signed short *)DMA2_10_Y_MODIFY
+#define pDMA2_10_CURR_DESC_PTR	(volatile void **)DMA2_10_CURR_DESC_PTR
+#define pDMA2_10_CURR_ADDR	(volatile void **)DMA2_10_CURR_ADDR
+#define pDMA2_10_CURR_X_COUNT	(volatile unsigned short *)DMA2_10_CURR_X_COUNT
+#define pDMA2_10_CURR_Y_COUNT	(volatile unsigned short *)DMA2_10_CURR_Y_COUNT
+#define pDMA2_10_IRQ_STATUS	(volatile unsigned short *)DMA2_10_IRQ_STATUS
+#define pDMA2_10_PERIPHERAL_MAP (volatile unsigned short *)DMA2_10_PERIPHERAL_MAP
+#define pDMA2_11_CONFIG		(volatile unsigned short *)DMA2_11_CONFIG
+#define pDMA2_11_NEXT_DESC_PTR	(volatile void **)DMA2_11_NEXT_DESC_PTR
+#define pDMA2_11_START_ADDR	(volatile void **)DMA2_11_START_ADDR
+#define pDMA2_11_X_COUNT	(volatile unsigned short *)DMA2_11_X_COUNT
+#define pDMA2_11_Y_COUNT	(volatile unsigned short *)DMA2_11_Y_COUNT
+#define pDMA2_11_X_MODIFY	(volatile signed short *)DMA2_11_X_MODIFY
+#define pDMA2_11_Y_MODIFY	(volatile signed short *)DMA2_11_Y_MODIFY
+#define pDMA2_11_CURR_DESC_PTR	(volatile void **)DMA2_11_CURR_DESC_PTR
+#define pDMA2_11_CURR_ADDR	(volatile void **)DMA2_11_CURR_ADDR
+#define pDMA2_11_CURR_X_COUNT	(volatile unsigned short *)DMA2_11_CURR_X_COUNT
+#define pDMA2_11_CURR_Y_COUNT	(volatile unsigned short *)DMA2_11_CURR_Y_COUNT
+#define pDMA2_11_IRQ_STATUS	(volatile unsigned short *)DMA2_11_IRQ_STATUS
+#define pDMA2_11_PERIPHERAL_MAP (volatile unsigned short *)DMA2_11_PERIPHERAL_MAP
+
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define pMDMA2_D0_CONFIG	(volatile unsigned short *)MDMA2_D0_CONFIG
+#define pMDMA2_D0_NEXT_DESC_PTR (volatile void **)MDMA2_D0_NEXT_DESC_PTR
+#define pMDMA2_D0_START_ADDR	(volatile void **)MDMA2_D0_START_ADDR
+#define pMDMA2_D0_X_COUNT	(volatile unsigned short *)MDMA2_D0_X_COUNT
+#define pMDMA2_D0_Y_COUNT	(volatile unsigned short *)MDMA2_D0_Y_COUNT
+#define pMDMA2_D0_X_MODIFY	(volatile signed short *)MDMA2_D0_X_MODIFY
+#define pMDMA2_D0_Y_MODIFY	(volatile signed short *)MDMA2_D0_Y_MODIFY
+#define pMDMA2_D0_CURR_DESC_PTR (volatile void **)MDMA2_D0_CURR_DESC_PTR
+#define pMDMA2_D0_CURR_ADDR	(volatile void **)MDMA2_D0_CURR_ADDR
+#define pMDMA2_D0_CURR_X_COUNT	(volatile unsigned short *)MDMA2_D0_CURR_X_COUNT
+#define pMDMA2_D0_CURR_Y_COUNT	(volatile unsigned short *)MDMA2_D0_CURR_Y_COUNT
+#define pMDMA2_D0_IRQ_STATUS	(volatile unsigned short *)MDMA2_D0_IRQ_STATUS
+#define pMDMA2_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D0_PERIPHERAL_MAP
+#define pMDMA2_S0_CONFIG	(volatile unsigned short *)MDMA2_S0_CONFIG
+#define pMDMA2_S0_NEXT_DESC_PTR (volatile void **)MDMA2_S0_NEXT_DESC_PTR
+#define pMDMA2_S0_START_ADDR	(volatile void **)MDMA2_S0_START_ADDR
+#define pMDMA2_S0_X_COUNT	(volatile unsigned short *)MDMA2_S0_X_COUNT
+#define pMDMA2_S0_Y_COUNT	(volatile unsigned short *)MDMA2_S0_Y_COUNT
+#define pMDMA2_S0_X_MODIFY	(volatile signed short *)MDMA2_S0_X_MODIFY
+#define pMDMA2_S0_Y_MODIFY	(volatile signed short *)MDMA2_S0_Y_MODIFY
+#define pMDMA2_S0_CURR_DESC_PTR (volatile void **)MDMA2_S0_CURR_DESC_PTR
+#define pMDMA2_S0_CURR_ADDR	(volatile void **)MDMA2_S0_CURR_ADDR
+#define pMDMA2_S0_CURR_X_COUNT	(volatile unsigned short *)MDMA2_S0_CURR_X_COUNT
+#define pMDMA2_S0_CURR_Y_COUNT	(volatile unsigned short *)MDMA2_S0_CURR_Y_COUNT
+#define pMDMA2_S0_IRQ_STATUS	(volatile unsigned short *)MDMA2_S0_IRQ_STATUS
+#define pMDMA2_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S0_PERIPHERAL_MAP
+#define pMDMA2_D1_CONFIG	(volatile unsigned short *)MDMA2_D1_CONFIG
+#define pMDMA2_D1_NEXT_DESC_PTR (volatile void **)MDMA2_D1_NEXT_DESC_PTR
+#define pMDMA2_D1_START_ADDR	(volatile void **)MDMA2_D1_START_ADDR
+#define pMDMA2_D1_X_COUNT	(volatile unsigned short *)MDMA2_D1_X_COUNT
+#define pMDMA2_D1_Y_COUNT	(volatile unsigned short *)MDMA2_D1_Y_COUNT
+#define pMDMA2_D1_X_MODIFY	(volatile signed short *)MDMA2_D1_X_MODIFY
+#define pMDMA2_D1_Y_MODIFY	(volatile signed short *)MDMA2_D1_Y_MODIFY
+#define pMDMA2_D1_CURR_DESC_PTR (volatile void **)MDMA2_D1_CURR_DESC_PTR
+#define pMDMA2_D1_CURR_ADDR	(volatile void **)MDMA2_D1_CURR_ADDR
+#define pMDMA2_D1_CURR_X_COUNT	(volatile unsigned short *)MDMA2_D1_CURR_X_COUNT
+#define pMDMA2_D1_CURR_Y_COUNT	(volatile unsigned short *)MDMA2_D1_CURR_Y_COUNT
+#define pMDMA2_D1_IRQ_STATUS	(volatile unsigned short *)MDMA2_D1_IRQ_STATUS
+#define pMDMA2_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D1_PERIPHERAL_MAP
+#define pMDMA2_S1_CONFIG	(volatile unsigned short *)MDMA2_S1_CONFIG
+#define pMDMA2_S1_NEXT_DESC_PTR (volatile void **)MDMA2_S1_NEXT_DESC_PTR
+#define pMDMA2_S1_START_ADDR	(volatile void **)MDMA2_S1_START_ADDR
+#define pMDMA2_S1_X_COUNT	(volatile unsigned short *)MDMA2_S1_X_COUNT
+#define pMDMA2_S1_Y_COUNT	(volatile unsigned short *)MDMA2_S1_Y_COUNT
+#define pMDMA2_S1_X_MODIFY	(volatile signed short *)MDMA2_S1_X_MODIFY
+#define pMDMA2_S1_Y_MODIFY	(volatile signed short *)MDMA2_S1_Y_MODIFY
+#define pMDMA2_S1_CURR_DESC_PTR (volatile void **)MDMA2_S1_CURR_DESC_PTR
+#define pMDMA2_S1_CURR_ADDR	(volatile void **)MDMA2_S1_CURR_ADDR
+#define pMDMA2_S1_CURR_X_COUNT	(volatile unsigned short *)MDMA2_S1_CURR_X_COUNT
+#define pMDMA2_S1_CURR_Y_COUNT	(volatile unsigned short *)MDMA2_S1_CURR_Y_COUNT
+#define pMDMA2_S1_IRQ_STATUS	(volatile unsigned short *)MDMA2_S1_IRQ_STATUS
+#define pMDMA2_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S1_PERIPHERAL_MAP
+
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define pIMDMA_D0_CONFIG	(volatile unsigned short *)IMDMA_D0_CONFIG
+#define pIMDMA_D0_NEXT_DESC_PTR (volatile void **)IMDMA_D0_NEXT_DESC_PTR
+#define pIMDMA_D0_START_ADDR	(volatile void **)IMDMA_D0_START_ADDR
+#define pIMDMA_D0_X_COUNT	(volatile unsigned short *)IMDMA_D0_X_COUNT
+#define pIMDMA_D0_Y_COUNT	(volatile unsigned short *)IMDMA_D0_Y_COUNT
+#define pIMDMA_D0_X_MODIFY	(volatile signed short *)IMDMA_D0_X_MODIFY
+#define pIMDMA_D0_Y_MODIFY	(volatile signed short *)IMDMA_D0_Y_MODIFY
+#define pIMDMA_D0_CURR_DESC_PTR (volatile void **)IMDMA_D0_CURR_DESC_PTR
+#define pIMDMA_D0_CURR_ADDR	(volatile void **)IMDMA_D0_CURR_ADDR
+#define pIMDMA_D0_CURR_X_COUNT	(volatile unsigned short *)IMDMA_D0_CURR_X_COUNT
+#define pIMDMA_D0_CURR_Y_COUNT	(volatile unsigned short *)IMDMA_D0_CURR_Y_COUNT
+#define pIMDMA_D0_IRQ_STATUS	(volatile unsigned short *)IMDMA_D0_IRQ_STATUS
+#define pIMDMA_S0_CONFIG	(volatile unsigned short *)IMDMA_S0_CONFIG
+#define pIMDMA_S0_NEXT_DESC_PTR (volatile void **)IMDMA_S0_NEXT_DESC_PTR
+#define pIMDMA_S0_START_ADDR	(volatile void **)IMDMA_S0_START_ADDR
+#define pIMDMA_S0_X_COUNT	(volatile unsigned short *)IMDMA_S0_X_COUNT
+#define pIMDMA_S0_Y_COUNT	(volatile unsigned short *)IMDMA_S0_Y_COUNT
+#define pIMDMA_S0_X_MODIFY	(volatile signed short *)IMDMA_S0_X_MODIFY
+#define pIMDMA_S0_Y_MODIFY	(volatile signed short *)IMDMA_S0_Y_MODIFY
+#define pIMDMA_S0_CURR_DESC_PTR (volatile void **)IMDMA_S0_CURR_DESC_PTR
+#define pIMDMA_S0_CURR_ADDR	(volatile void **)IMDMA_S0_CURR_ADDR
+#define pIMDMA_S0_CURR_X_COUNT	(volatile unsigned short *)IMDMA_S0_CURR_X_COUNT
+#define pIMDMA_S0_CURR_Y_COUNT	(volatile unsigned short *)IMDMA_S0_CURR_Y_COUNT
+#define pIMDMA_S0_IRQ_STATUS	(volatile unsigned short *)IMDMA_S0_IRQ_STATUS
+#define pIMDMA_D1_CONFIG	(volatile unsigned short *)IMDMA_D1_CONFIG
+#define pIMDMA_D1_NEXT_DESC_PTR (volatile void **)IMDMA_D1_NEXT_DESC_PTR
+#define pIMDMA_D1_START_ADDR	(volatile void **)IMDMA_D1_START_ADDR
+#define pIMDMA_D1_X_COUNT	(volatile unsigned short *)IMDMA_D1_X_COUNT
+#define pIMDMA_D1_Y_COUNT	(volatile unsigned short *)IMDMA_D1_Y_COUNT
+#define pIMDMA_D1_X_MODIFY	(volatile signed short *)IMDMA_D1_X_MODIFY
+#define pIMDMA_D1_Y_MODIFY	(volatile signed short *)IMDMA_D1_Y_MODIFY
+#define pIMDMA_D1_CURR_DESC_PTR (volatile void **)IMDMA_D1_CURR_DESC_PTR
+#define pIMDMA_D1_CURR_ADDR	(volatile void **)IMDMA_D1_CURR_ADDR
+#define pIMDMA_D1_CURR_X_COUNT	(volatile unsigned short *)IMDMA_D1_CURR_X_COUNT
+#define pIMDMA_D1_CURR_Y_COUNT	(volatile unsigned short *)IMDMA_D1_CURR_Y_COUNT
+#define pIMDMA_D1_IRQ_STATUS	(volatile unsigned short *)IMDMA_D1_IRQ_STATUS
+#define pIMDMA_S1_CONFIG	(volatile unsigned short *)IMDMA_S1_CONFIG
+#define pIMDMA_S1_NEXT_DESC_PTR (volatile void **)IMDMA_S1_NEXT_DESC_PTR
+#define pIMDMA_S1_START_ADDR	(volatile void **)IMDMA_S1_START_ADDR
+#define pIMDMA_S1_X_COUNT	(volatile unsigned short *)IMDMA_S1_X_COUNT
+#define pIMDMA_S1_Y_COUNT	(volatile unsigned short *)IMDMA_S1_Y_COUNT
+#define pIMDMA_S1_X_MODIFY	(volatile signed short *)IMDMA_S1_X_MODIFY
+#define pIMDMA_S1_Y_MODIFY	(volatile signed short *)IMDMA_S1_Y_MODIFY
+#define pIMDMA_S1_CURR_DESC_PTR (volatile void **)IMDMA_S1_CURR_DESC_PTR
+#define pIMDMA_S1_CURR_ADDR	(volatile void **)IMDMA_S1_CURR_ADDR
+#define pIMDMA_S1_CURR_X_COUNT	(volatile unsigned short *)IMDMA_S1_CURR_X_COUNT
+#define pIMDMA_S1_CURR_Y_COUNT	(volatile unsigned short *)IMDMA_S1_CURR_Y_COUNT
+#define pIMDMA_S1_IRQ_STATUS	(volatile unsigned short *)IMDMA_S1_IRQ_STATUS
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * core A (0xFFC0 0100-0xFFC0 01FF)
+ */
+#define pSWRST			(volatile unsigned short *)SICA_SWRST
+#define pSYSCR			(volatile unsigned short *)SICA_SYSCR
+#define pRVECT			(volatile unsigned short *)SICA_RVECT
+#define pSIC_SWRST		(volatile unsigned short *)SICA_SWRST
+#define pSIC_SYSCR		(volatile unsigned short *)SICA_SYSCR
+#define pSIC_RVECT		(volatile unsigned short *)SICA_RVECT
+#define pSIC_IMASK		(volatile unsigned long *)SICA_IMASK
+#define pSIC_IAR0		((volatile unsigned long *)SICA_IAR0)
+#define pSIC_IAR1		(volatile unsigned long *)SICA_IAR1
+#define pSIC_IAR2		(volatile unsigned long *)SICA_IAR2
+#define pSIC_ISR		(volatile unsigned long *)SICA_ISR0
+#define pSIC_IWR		(volatile unsigned long *)SICA_IWR0
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define pWDOG_CTL		(volatile unsigned short *)WDOGA_CTL
+#define pWDOG_CNT		(volatile unsigned long *)WDOGA_CNT
+#define pWDOG_STAT		(volatile unsigned long *)WDOGA_STAT
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define pFIO_FLAG_D		(volatile unsigned short *)FIO0_FLAG_D
+#define pFIO_FLAG_C		(volatile unsigned short *)FIO0_FLAG_C
+#define pFIO_FLAG_S		(volatile unsigned short *)FIO0_FLAG_S
+#define pFIO_FLAG_T		(volatile unsigned short *)FIO0_FLAG_T
+#define pFIO_MASKA_D		(volatile unsigned short *)FIO0_MASKA_D
+#define pFIO_MASKA_C		(volatile unsigned short *)FIO0_MASKA_C
+#define pFIO_MASKA_S		(volatile unsigned short *)FIO0_MASKA_S
+#define pFIO_MASKA_T		(volatile unsigned short *)FIO0_MASKA_T
+#define pFIO_MASKB_D		(volatile unsigned short *)FIO0_MASKB_D
+#define pFIO_MASKB_C		(volatile unsigned short *)FIO0_MASKB_C
+#define pFIO_MASKB_S		(volatile unsigned short *)FIO0_MASKB_S
+#define pFIO_MASKB_T		(volatile unsigned short *)FIO0_MASKB_T
+#define pFIO_DIR		(volatile unsigned short *)FIO0_DIR
+#define pFIO_POLAR		(volatile unsigned short *)FIO0_POLAR
+#define pFIO_EDGE		(volatile unsigned short *)FIO0_EDGE
+#define pFIO_BOTH		(volatile unsigned short *)FIO0_BOTH
+#define pFIO_INEN		(volatile unsigned short *)FIO0_INEN
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/
+#define pPPI_CONTROL		(volatile unsigned short *)PPI0_CONTROL
+#define pPPI_STATUS		(volatile unsigned short *)PPI0_STATUS
+#define pPPI_COUNT		(volatile unsigned short *)PPI0_COUNT
+#define pPPI_DELAY		(volatile unsigned short *)PPI0_DELAY
+#define pPPI_FRAME		(volatile unsigned short *)PPI0_FRAME
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define pDMA0_CONFIG		(volatile unsigned short *)DMA1_0_CONFIG
+#define pDMA0_NEXT_DESC_PTR	(volatile void **)DMA1_0_NEXT_DESC_PTR
+#define pDMA0_START_ADDR	(volatile void **)DMA1_0_START_ADDR
+#define pDMA0_X_COUNT		(volatile unsigned short *)DMA1_0_X_COUNT
+#define pDMA0_Y_COUNT		(volatile unsigned short *)DMA1_0_Y_COUNT
+#define pDMA0_X_MODIFY		(volatile unsigned short *)DMA1_0_X_MODIFY
+#define pDMA0_Y_MODIFY		(volatile unsigned short *)DMA1_0_Y_MODIFY
+#define pDMA0_CURR_DESC_PTR	(volatile void **)DMA1_0_CURR_DESC_PTR
+#define pDMA0_CURR_ADDR		(volatile void **)DMA1_0_CURR_ADDR
+#define pDMA0_CURR_X_COUNT	(volatile unsigned short *)DMA1_0_CURR_X_COUNT
+#define pDMA0_CURR_Y_COUNT	(volatile unsigned short *)DMA1_0_CURR_Y_COUNT
+#define pDMA0_IRQ_STATUS	(volatile unsigned short *)DMA1_0_IRQ_STATUS
+#define pDMA0_PERIPHERAL_MAP	(volatile unsigned short *)DMA1_0_PERIPHERAL_MAP
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define pMDMA_D0_CONFIG		(volatile unsigned short *)MDMA1_D0_CONFIG
+#define pMDMA_D0_NEXT_DESC_PTR	(volatile void **)MDMA1_D0_NEXT_DESC_PTR
+#define pMDMA_D0_START_ADDR	(volatile void **)MDMA1_D0_START_ADDR
+#define pMDMA_D0_X_COUNT	(volatile unsigned short *)MDMA1_D0_X_COUNT
+#define pMDMA_D0_Y_COUNT	(volatile unsigned short *)MDMA1_D0_Y_COUNT
+#define pMDMA_D0_X_MODIFY	(volatile unsigned short *)MDMA1_D0_X_MODIFY
+#define pMDMA_D0_Y_MODIFY	(volatile unsigned short *)MDMA1_D0_Y_MODIFY
+#define pMDMA_D0_CURR_DESC_PTR	(volatile void **)MDMA1_D0_CURR_DESC_PTR
+#define pMDMA_D0_CURR_ADDR	(volatile void **)MDMA1_D0_CURR_ADDR
+#define pMDMA_D0_CURR_X_COUNT	(volatile unsigned short *)MDMA1_D0_CURR_X_COUNT
+#define pMDMA_D0_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT
+#define pMDMA_D0_IRQ_STATUS	(volatile unsigned short *)MDMA1_D0_IRQ_STATUS
+#define pMDMA_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP
+#define pMDMA_S0_CONFIG		(volatile unsigned short *)MDMA1_S0_CONFIG
+#define pMDMA_S0_NEXT_DESC_PTR	(volatile void **)MDMA1_S0_NEXT_DESC_PTR
+#define pMDMA_S0_START_ADDR	(volatile void **)MDMA1_S0_START_ADDR
+#define pMDMA_S0_X_COUNT	(volatile unsigned short *)MDMA1_S0_X_COUNT
+#define pMDMA_S0_Y_COUNT	(volatile unsigned short *)MDMA1_S0_Y_COUNT
+#define pMDMA_S0_X_MODIFY	(volatile unsigned short *)MDMA1_S0_X_MODIFY
+#define pMDMA_S0_Y_MODIFY	(volatile unsigned short *)MDMA1_S0_Y_MODIFY
+#define pMDMA_S0_CURR_DESC_PTR	(volatile void **)MDMA1_S0_CURR_DESC_PTR
+#define pMDMA_S0_CURR_ADDR	(volatile void **)MDMA1_S0_CURR_ADDR
+#define pMDMA_S0_CURR_X_COUNT	(volatile unsigned short *)MDMA1_S0_CURR_X_COUNT
+#define pMDMA_S0_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT
+#define pMDMA_S0_IRQ_STATUS	(volatile unsigned short *)MDMA1_S0_IRQ_STATUS
+#define pMDMA_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP
+#define pMDMA_D1_CONFIG		(volatile unsigned short *)MDMA1_D1_CONFIG
+#define pMDMA_D1_NEXT_DESC_PTR	(volatile void **)MDMA1_D1_NEXT_DESC_PTR
+#define pMDMA_D1_START_ADDR	(volatile void **)MDMA1_D1_START_ADDR
+#define pMDMA_D1_X_COUNT	(volatile unsigned short *)MDMA1_D1_X_COUNT
+#define pMDMA_D1_Y_COUNT	(volatile unsigned short *)MDMA1_D1_Y_COUNT
+#define pMDMA_D1_X_MODIFY	(volatile unsigned short *)MDMA1_D1_X_MODIFY
+#define pMDMA_D1_Y_MODIFY	(volatile unsigned short *)MDMA1_D1_Y_MODIFY
+#define pMDMA_D1_CURR_DESC_PTR	(volatile void **)MDMA1_D1_CURR_DESC_PTR
+#define pMDMA_D1_CURR_ADDR	(volatile void **)MDMA1_D1_CURR_ADDR
+#define pMDMA_D1_CURR_X_COUNT	(volatile unsigned short *)MDMA1_D1_CURR_X_COUNT
+#define pMDMA_D1_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT
+#define pMDMA_D1_IRQ_STATUS	(volatile unsigned short *)MDMA1_D1_IRQ_STATUS
+#define pMDMA_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP
+#define pMDMA_S1_CONFIG		(volatile unsigned short *)MDMA1_S1_CONFIG
+#define pMDMA_S1_NEXT_DESC_PTR	(volatile void **)MDMA1_S1_NEXT_DESC_PTR
+#define pMDMA_S1_START_ADDR	(volatile void **)MDMA1_S1_START_ADDR
+#define pMDMA_S1_X_COUNT	(volatile unsigned short *)MDMA1_S1_X_COUNT
+#define pMDMA_S1_Y_COUNT	(volatile unsigned short *)MDMA1_S1_Y_COUNT
+#define pMDMA_S1_X_MODIFY	(volatile unsigned short *)MDMA1_S1_X_MODIFY
+#define pMDMA_S1_Y_MODIFY	(volatile unsigned short *)MDMA1_S1_Y_MODIFY
+#define pMDMA_S1_CURR_DESC_PTR	(volatile void **)MDMA1_S1_CURR_DESC_PTR
+#define pMDMA_S1_CURR_ADDR	(volatile void **)MDMA1_S1_CURR_ADDR
+#define pMDMA_S1_CURR_X_COUNT	(volatile unsigned short *)MDMA1_S1_CURR_X_COUNT
+#define pMDMA_S1_CURR_Y_COUNT	(volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT
+#define pMDMA_S1_IRQ_STATUS	(volatile unsigned short *)MDMA1_S1_IRQ_STATUS
+#define pMDMA_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define pDMA1_CONFIG		(volatile unsigned short *)DMA2_0_CONFIG
+#define pDMA1_NEXT_DESC_PTR	(volatile void **)DMA2_0_NEXT_DESC_PTR
+#define pDMA1_START_ADDR	(volatile void **)DMA2_0_START_ADDR
+#define pDMA1_X_COUNT		(volatile unsigned short *)DMA2_0_X_COUNT
+#define pDMA1_Y_COUNT		(volatile unsigned short *)DMA2_0_Y_COUNT
+#define pDMA1_X_MODIFY		(volatile unsigned short *)DMA2_0_X_MODIFY
+#define pDMA1_Y_MODIFY		(volatile unsigned short *)DMA2_0_Y_MODIFY
+#define pDMA1_CURR_DESC_PTR	(volatile void **)DMA2_0_CURR_DESC_PTR
+#define pDMA1_CURR_ADDR		(volatile void **)DMA2_0_CURR_ADDR
+#define pDMA1_CURR_X_COUNT	(volatile unsigned short *)DMA2_0_CURR_X_COUNT
+#define pDMA1_CURR_Y_COUNT	(volatile unsigned short *)DMA2_0_CURR_Y_COUNT
+#define pDMA1_IRQ_STATUS	(volatile unsigned short *)DMA2_0_IRQ_STATUS
+#define pDMA1_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_0_PERIPHERAL_MAP
+#define pDMA2_CONFIG		(volatile unsigned short *)DMA2_1_CONFIG
+#define pDMA2_NEXT_DESC_PTR	(volatile void **)DMA2_1_NEXT_DESC_PTR
+#define pDMA2_START_ADDR	(volatile void **)DMA2_1_START_ADDR
+#define pDMA2_X_COUNT		(volatile unsigned short *)DMA2_1_X_COUNT
+#define pDMA2_Y_COUNT		(volatile unsigned short *)DMA2_1_Y_COUNT
+#define pDMA2_X_MODIFY		(volatile unsigned short *)DMA2_1_X_MODIFY
+#define pDMA2_Y_MODIFY		(volatile unsigned short *)DMA2_1_Y_MODIFY
+#define pDMA2_CURR_DESC_PTR	(volatile void **)DMA2_1_CURR_DESC_PTR
+#define pDMA2_CURR_ADDR		(volatile void **)DMA2_1_CURR_ADDR
+#define pDMA2_CURR_X_COUNT	(volatile unsigned short *)DMA2_1_CURR_X_COUNT
+#define pDMA2_CURR_Y_COUNT	(volatile unsigned short *)DMA2_1_CURR_Y_COUNT
+#define pDMA2_IRQ_STATUS	(volatile unsigned short *)DMA2_1_IRQ_STATUS
+#define pDMA2_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_1_PERIPHERAL_MAP
+#define pDMA3_CONFIG		(volatile unsigned short *)DMA2_2_CONFIG
+#define pDMA3_NEXT_DESC_PTR	(volatile void **)DMA2_2_NEXT_DESC_PTR
+#define pDMA3_START_ADDR	(volatile void **)DMA2_2_START_ADDR
+#define pDMA3_X_COUNT		(volatile unsigned short *)DMA2_2_X_COUNT
+#define pDMA3_Y_COUNT		(volatile unsigned short *)DMA2_2_Y_COUNT
+#define pDMA3_X_MODIFY		(volatile unsigned short *)DMA2_2_X_MODIFY
+#define pDMA3_Y_MODIFY		(volatile unsigned short *)DMA2_2_Y_MODIFY
+#define pDMA3_CURR_DESC_PTR	(volatile void **)DMA2_2_CURR_DESC_PTR
+#define pDMA3_CURR_ADDR		(volatile void **)DMA2_2_CURR_ADDR
+#define pDMA3_CURR_X_COUNT	(volatile unsigned short *)DMA2_2_CURR_X_COUNT
+#define pDMA3_CURR_Y_COUNT	(volatile unsigned short *)DMA2_2_CURR_Y_COUNT
+#define pDMA3_IRQ_STATUS	(volatile unsigned short *)DMA2_2_IRQ_STATUS
+#define pDMA3_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_2_PERIPHERAL_MAP
+#define pDMA4_CONFIG		(volatile unsigned short *)DMA2_3_CONFIG
+#define pDMA4_NEXT_DESC_PTR	(volatile void **)DMA2_3_NEXT_DESC_PTR
+#define pDMA4_START_ADDR	(volatile void **)DMA2_3_START_ADDR
+#define pDMA4_X_COUNT		(volatile unsigned short *)DMA2_3_X_COUNT
+#define pDMA4_Y_COUNT		(volatile unsigned short *)DMA2_3_Y_COUNT
+#define pDMA4_X_MODIFY		(volatile unsigned short *)DMA2_3_X_MODIFY
+#define pDMA4_Y_MODIFY		(volatile unsigned short *)DMA2_3_Y_MODIFY
+#define pDMA4_CURR_DESC_PTR	(volatile void **)DMA2_3_CURR_DESC_PTR
+#define pDMA4_CURR_ADDR		(volatile void **)DMA2_3_CURR_ADDR
+#define pDMA4_CURR_X_COUNT	(volatile unsigned short *)DMA2_3_CURR_X_COUNT
+#define pDMA4_CURR_Y_COUNT	(volatile unsigned short *)DMA2_3_CURR_Y_COUNT
+#define pDMA4_IRQ_STATUS	(volatile unsigned short *)DMA2_3_IRQ_STATUS
+#define pDMA4_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_3_PERIPHERAL_MAP
+#define pDMA5_CONFIG		(volatile unsigned short *)DMA2_4_CONFIG
+#define pDMA5_NEXT_DESC_PTR	(volatile void **)DMA2_4_NEXT_DESC_PTR
+#define pDMA5_START_ADDR	(volatile void **)DMA2_4_START_ADDR
+#define pDMA5_X_COUNT		(volatile unsigned short *)DMA2_4_X_COUNT
+#define pDMA5_Y_COUNT		(volatile unsigned short *)DMA2_4_Y_COUNT
+#define pDMA5_X_MODIFY		(volatile unsigned short *)DMA2_4_X_MODIFY
+#define pDMA5_Y_MODIFY		(volatile unsigned short *)DMA2_4_Y_MODIFY
+#define pDMA5_CURR_DESC_PTR	(volatile void **)DMA2_4_CURR_DESC_PTR
+#define pDMA5_CURR_ADDR		(volatile void **)DMA2_4_CURR_ADDR
+#define pDMA5_CURR_X_COUNT	(volatile unsigned short *)DMA2_4_CURR_X_COUNT
+#define pDMA5_CURR_Y_COUNT	(volatile unsigned short *)DMA2_4_CURR_Y_COUNT
+#define pDMA5_IRQ_STATUS	(volatile unsigned short *)DMA2_4_IRQ_STATUS
+#define pDMA5_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_4_PERIPHERAL_MAP
+#define pDMA6_CONFIG		(volatile unsigned short *)DMA2_5_CONFIG
+#define pDMA6_NEXT_DESC_PTR	(volatile void **)DMA2_5_NEXT_DESC_PTR
+#define pDMA6_START_ADDR	(volatile void **)DMA2_5_START_ADDR
+#define pDMA6_X_COUNT		(volatile unsigned short *)DMA2_5_X_COUNT
+#define pDMA6_Y_COUNT		(volatile unsigned short *)DMA2_5_Y_COUNT
+#define pDMA6_X_MODIFY		(volatile unsigned short *)DMA2_5_X_MODIFY
+#define pDMA6_Y_MODIFY		(volatile unsigned short *)DMA2_5_Y_MODIFY
+#define pDMA6_CURR_DESC_PTR	(volatile void **)DMA2_5_CURR_DESC_PTR
+#define pDMA6_CURR_ADDR		(volatile void **)DMA2_5_CURR_ADDR
+#define pDMA6_CURR_X_COUNT	(volatile unsigned short *)DMA2_5_CURR_X_COUNT
+#define pDMA6_CURR_Y_COUNT	(volatile unsigned short *)DMA2_5_CURR_Y_COUNT
+#define pDMA6_IRQ_STATUS	(volatile unsigned short *)DMA2_5_IRQ_STATUS
+#define pDMA6_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_5_PERIPHERAL_MAP
+#define pDMA7_CONFIG		(volatile unsigned short *)DMA2_6_CONFIG
+#define pDMA7_NEXT_DESC_PTR	(volatile void **)DMA2_6_NEXT_DESC_PTR
+#define pDMA7_START_ADDR	(volatile void **)DMA2_6_START_ADDR
+#define pDMA7_X_COUNT		(volatile unsigned short *)DMA2_6_X_COUNT
+#define pDMA7_Y_COUNT		(volatile unsigned short *)DMA2_6_Y_COUNT
+#define pDMA7_X_MODIFY		(volatile unsigned short *)DMA2_6_X_MODIFY
+#define pDMA7_Y_MODIFY		(volatile unsigned short *)DMA2_6_Y_MODIFY
+#define pDMA7_CURR_DESC_PTR	(volatile void **)DMA2_6_CURR_DESC_PTR
+#define pDMA7_CURR_ADDR		(volatile void **)DMA2_6_CURR_ADDR
+#define pDMA7_CURR_X_COUNT	(volatile unsigned short *)DMA2_6_CURR_X_COUNT
+#define pDMA7_CURR_Y_COUNT	(volatile unsigned short *)DMA2_6_CURR_Y_COUNT
+#define pDMA7_IRQ_STATUS	(volatile unsigned short *)DMA2_6_IRQ_STATUS
+#define pDMA7_PERIPHERAL_MAP	(volatile unsigned short *)DMA2_6_PERIPHERAL_MAP
+
+#endif				/* _CDEF_BF561_H */
diff --git a/include/asm-blackfin/arch-bf561/defBF561.h b/include/asm-blackfin/arch-bf561/defBF561.h
new file mode 100644
index 0000000..c6e3de5
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/defBF561.h
@@ -0,0 +1,1941 @@
+/*
+ * defBF561.h
+ *
+ * (c) Copyright 2001-2003 Analog Devices, Inc.  All rights reserved.
+ *
+ */
+
+/* SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */
+
+#ifndef _DEF_BF561_H
+#define _DEF_BF561_H
+
+/*
+ * #if !defined(__ADSPBF561__)
+ * #warning defBF561.h should only be included for BF561 chip.
+ * #endif
+ */
+
+/* include all Core registers and bit definitions */
+#include <asm/arch-common/def_LPBlackfin.h>
+
+/*
+ * Helper macros
+ * usage:
+ * P0.H = HI(UART_THR);
+ * P0.L = LO(UART_THR);
+ */
+
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
+/*
+ * System MMR Register Map
+ */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define PLL_CTL			0xFFC00000	/* PLL Control register */
+#define PLL_DIV			0xFFC00004	/* PLL Divide Register */
+#define VR_CTL			0xFFC00008	/* Voltage Regulator Control Register */
+#define PLL_STAT		0xFFC0000C	/* PLL Status register */
+#define PLL_LOCKCNT		0xFFC00010	/* PLL Lock Count register */
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * core A (0xFFC0 0100-0xFFC0 01FF)
+ */
+#define SICA_SWRST		0xFFC00100	/* Software Reset register */
+#define SICA_SYSCR		0xFFC00104	/* System Reset Configuration register */
+#define SICA_RVECT		0xFFC00108	/* SIC Reset Vector Address Register */
+#define SICA_IMASK		0xFFC0010C	/* SIC Interrupt Mask register 0 */
+#define SICA_IMASK0		0xFFC0010C	/* SIC Interrupt Mask register 0 */
+#define SICA_IMASK1		0xFFC00110	/* SIC Interrupt Mask register 1 */
+#define SICA_IAR0		0xFFC00124	/* SIC Interrupt Assignment Register 0 */
+#define SICA_IAR1		0xFFC00128	/* SIC Interrupt Assignment Register 1 */
+#define SICA_IAR2		0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
+#define SICA_IAR3		0xFFC00130	/* SIC Interrupt Assignment Register 3 */
+#define SICA_IAR4		0xFFC00134	/* SIC Interrupt Assignment Register 4 */
+#define SICA_IAR5		0xFFC00138	/* SIC Interrupt Assignment Register 5 */
+#define SICA_IAR6		0xFFC0013C	/* SIC Interrupt Assignment Register 6 */
+#define SICA_IAR7		0xFFC00140	/* SIC Interrupt Assignment Register 7 */
+#define SICA_ISR0		0xFFC00114	/* SIC Interrupt Status register 0 */
+#define SICA_ISR1		0xFFC00118	/* SIC Interrupt Status register 1 */
+#define SICA_IWR0		0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SICA_IWR1		0xFFC00120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * Core B (0xFFC0 1100-0xFFC0 11FF)
+ */
+#define SICB_SWRST		0xFFC01100	/* reserved */
+#define SICB_SYSCR		0xFFC01104	/* reserved */
+#define SICB_RVECT		0xFFC01108	/* SIC Reset Vector Address Register */
+#define SICB_IMASK0		0xFFC0110C	/* SIC Interrupt Mask register 0 */
+#define SICB_IMASK1		0xFFC01110	/* SIC Interrupt Mask register 1 */
+#define SICB_IAR0		0xFFC01124	/* SIC Interrupt Assignment Register 0 */
+#define SICB_IAR1		0xFFC01128	/* SIC Interrupt Assignment Register 1 */
+#define SICB_IAR2		0xFFC0112C	/* SIC Interrupt Assignment Register 2 */
+#define SICB_IAR3		0xFFC01130	/* SIC Interrupt Assignment Register 3 */
+#define SICB_IAR4		0xFFC01134	/* SIC Interrupt Assignment Register 4 */
+#define SICB_IAR5		0xFFC01138	/* SIC Interrupt Assignment Register 5 */
+#define SICB_IAR6		0xFFC0113C	/* SIC Interrupt Assignment Register 6 */
+#define SICB_IAR7		0xFFC01140	/* SIC Interrupt Assignment Register 7 */
+#define SICB_ISR0		0xFFC01114	/* SIC Interrupt Status register 0 */
+#define SICB_ISR1		0xFFC01118	/* SIC Interrupt Status register 1 */
+#define SICB_IWR0		0xFFC0111C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SICB_IWR1		0xFFC01120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define WDOGA_CTL		0xFFC00200	/* Watchdog Control register */
+#define WDOGA_CNT		0xFFC00204	/* Watchdog Count register */
+#define WDOGA_STAT		0xFFC00208	/* Watchdog Status register */
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define WDOGB_CTL		0xFFC01200	/* Watchdog Control register */
+#define WDOGB_CNT		0xFFC01204	/* Watchdog Count register */
+#define WDOGB_STAT		0xFFC01208	/* Watchdog Status register */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define UART_THR		0xFFC00400	/* Transmit Holding register */
+#define UART_RBR		0xFFC00400	/* Receive Buffer register */
+#define UART_DLL		0xFFC00400	/* Divisor Latch (Low-Byte) */
+#define UART_IER		0xFFC00404	/* Interrupt Enable Register */
+#define UART_DLH		0xFFC00404	/* Divisor Latch (High-Byte) */
+#define UART_IIR		0xFFC00408	/* Interrupt Identification Register */
+#define UART_LCR		0xFFC0040C	/* Line Control Register */
+#define UART_MCR		0xFFC00410	/* Modem Control Register */
+#define UART_LSR		0xFFC00414	/* Line Status Register */
+#define UART_MSR		0xFFC00418	/* Modem Status Register */
+#define UART_SCR		0xFFC0041C	/* SCR Scratch Register */
+#define UART_GCTL		0xFFC00424	/* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI_CTL			0xFFC00500	/* SPI Control Register */
+#define SPI_FLG			0xFFC00504	/* SPI Flag register */
+#define SPI_STAT		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define TIMER0_CONFIG		0xFFC00600	/* Timer0 Configuration register */
+#define TIMER0_COUNTER		0xFFC00604	/* Timer0 Counter register */
+#define TIMER0_PERIOD		0xFFC00608	/* Timer0 Period register */
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer0 Width register */
+#define TIMER1_CONFIG		0xFFC00610	/* Timer1 Configuration register */
+#define TIMER1_COUNTER		0xFFC00614	/* Timer1 Counter register */
+#define TIMER1_PERIOD		0xFFC00618	/* Timer1 Period register */
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer1 Width register */
+#define TIMER2_CONFIG		0xFFC00620	/* Timer2 Configuration register */
+#define TIMER2_COUNTER		0xFFC00624	/* Timer2 Counter register */
+#define TIMER2_PERIOD		0xFFC00628	/* Timer2 Period register */
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer2 Width register */
+#define TIMER3_CONFIG		0xFFC00630	/* Timer3 Configuration register */
+#define TIMER3_COUNTER		0xFFC00634	/* Timer3 Counter register */
+#define TIMER3_PERIOD		0xFFC00638	/* Timer3 Period register */
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer3 Width register */
+#define TIMER4_CONFIG		0xFFC00640	/* Timer4 Configuration register */
+#define TIMER4_COUNTER		0xFFC00644	/* Timer4 Counter register */
+#define TIMER4_PERIOD		0xFFC00648	/* Timer4 Period register */
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer4 Width register */
+#define TIMER5_CONFIG		0xFFC00650	/* Timer5 Configuration register */
+#define TIMER5_COUNTER		0xFFC00654	/* Timer5 Counter register */
+#define TIMER5_PERIOD		0xFFC00658	/* Timer5 Period register */
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer5 Width register */
+#define TIMER6_CONFIG		0xFFC00660	/* Timer6 Configuration register */
+#define TIMER6_COUNTER		0xFFC00664	/* Timer6 Counter register */
+#define TIMER6_PERIOD		0xFFC00668	/* Timer6 Period register */
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer6 Width register */
+#define TIMER7_CONFIG		0xFFC00670	/* Timer7 Configuration register */
+#define TIMER7_COUNTER		0xFFC00674	/* Timer7 Counter register */
+#define TIMER7_PERIOD		0xFFC00678	/* Timer7 Period register */
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer7 Width register */
+#define TMRS8_ENABLE		0xFFC00680	/* Timer Enable Register */
+#define TMRS8_DISABLE		0xFFC00684	/* Timer Disable register */
+#define TMRS8_STATUS		0xFFC00688	/* Timer Status register */
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define TIMER8_CONFIG		0xFFC01600	/* Timer8 Configuration register */
+#define TIMER8_COUNTER		0xFFC01604	/* Timer8 Counter register */
+#define TIMER8_PERIOD		0xFFC01608	/* Timer8 Period register */
+#define TIMER8_WIDTH		0xFFC0160C	/* Timer8 Width register */
+#define TIMER9_CONFIG		0xFFC01610	/* Timer9 Configuration register */
+#define TIMER9_COUNTER		0xFFC01614	/* Timer9 Counter register */
+#define TIMER9_PERIOD		0xFFC01618	/* Timer9 Period register */
+#define TIMER9_WIDTH		0xFFC0161C	/* Timer9 Width register */
+#define TIMER10_CONFIG		0xFFC01620	/* Timer10 Configuration register */
+#define TIMER10_COUNTER		0xFFC01624	/* Timer10 Counter register */
+#define TIMER10_PERIOD		0xFFC01628	/* Timer10 Period register */
+#define TIMER10_WIDTH		0xFFC0162C	/* Timer10 Width register */
+#define TIMER11_CONFIG		0xFFC01630	/* Timer11 Configuration register */
+#define TIMER11_COUNTER		0xFFC01634	/* Timer11 Counter register */
+#define TIMER11_PERIOD		0xFFC01638	/* Timer11 Period register */
+#define TIMER11_WIDTH		0xFFC0163C	/* Timer11 Width register */
+#define TMRS4_ENABLE		0xFFC01640	/* Timer Enable Register */
+#define TMRS4_DISABLE		0xFFC01644	/* Timer Disable register */
+#define TMRS4_STATUS		0xFFC01648	/* Timer Status register */
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define FIO0_FLAG_D		0xFFC00700	/* Flag Data register */
+#define FIO0_FLAG_C		0xFFC00704	/* Flag Clear register */
+#define FIO0_FLAG_S		0xFFC00708	/* Flag Set register */
+#define FIO0_FLAG_T		0xFFC0070C	/* Flag Toggle register */
+#define FIO0_MASKA_D		0xFFC00710	/* Flag Mask Interrupt A Data register */
+#define FIO0_MASKA_C		0xFFC00714	/* Flag Mask Interrupt A Clear register */
+#define FIO0_MASKA_S		0xFFC00718	/* Flag Mask Interrupt A Set register */
+#define FIO0_MASKA_T		0xFFC0071C	/* Flag Mask Interrupt A Toggle register */
+#define FIO0_MASKB_D		0xFFC00720	/* Flag Mask Interrupt B Data register */
+#define FIO0_MASKB_C		0xFFC00724	/* Flag Mask Interrupt B Clear register */
+#define FIO0_MASKB_S		0xFFC00728	/* Flag Mask Interrupt B Set register */
+#define FIO0_MASKB_T		0xFFC0072C	/* Flag Mask Interrupt B Toggle register */
+#define FIO0_DIR		0xFFC00730	/* Flag Direction  register */
+#define FIO0_POLAR		0xFFC00734	/* Flag Polarity register */
+#define FIO0_EDGE		0xFFC00738	/* Flag Interrupt Sensitivity register */
+#define FIO0_BOTH		0xFFC0073C	/* Flag Set on Both Edges register */
+#define FIO0_INEN		0xFFC00740	/* Flag Input Enable register */
+
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define FIO1_FLAG_D		0xFFC01500	/* Flag Data register */
+#define FIO1_FLAG_C		0xFFC01504	/* Flag Clear register */
+#define FIO1_FLAG_S		0xFFC01508	/* Flag Set register */
+#define FIO1_FLAG_T		0xFFC0150C	/* Flag Toggle register */
+#define FIO1_MASKA_D		0xFFC01510	/* Flag Mask Interrupt A Data register */
+#define FIO1_MASKA_C		0xFFC01514	/* Flag Mask Interrupt A Clear register */
+#define FIO1_MASKA_S		0xFFC01518	/* Flag Mask Interrupt A Set register */
+#define FIO1_MASKA_T		0xFFC0151C	/* Flag Mask Interrupt A Toggle register */
+#define FIO1_MASKB_D		0xFFC01520	/* Flag Mask Interrupt B Data register */
+#define FIO1_MASKB_C		0xFFC01524	/* Flag Mask Interrupt B Clear register */
+#define FIO1_MASKB_S		0xFFC01528	/* Flag Mask Interrupt B Set register */
+#define FIO1_MASKB_T		0xFFC0152C	/* Flag Mask Interrupt B Toggle register */
+#define FIO1_DIR		0xFFC01530	/* Flag Direction register */
+#define FIO1_POLAR		0xFFC01534	/* Flag Polarity register */
+#define FIO1_EDGE		0xFFC01538	/* Flag  Interrupt Sensitivity register */
+#define FIO1_BOTH		0xFFC0153C	/* Flag Set on Both Edges register */
+#define FIO1_INEN		0xFFC01540	/* Flag Input Enable register */
+
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define FIO2_FLAG_D		0xFFC01700	/* Flag Data register */
+#define FIO2_FLAG_C		0xFFC01704	/* Flag Clear register */
+#define FIO2_FLAG_S		0xFFC01708	/* Flag Set register */
+#define FIO2_FLAG_T		0xFFC0170C	/* Flag Toggle register */
+#define FIO2_MASKA_D		0xFFC01710	/* Flag Mask Interrupt A Data register */
+#define FIO2_MASKA_C		0xFFC01714	/* Flag Mask Interrupt A Clear register */
+#define FIO2_MASKA_S		0xFFC01718	/* Flag Mask Interrupt A Set register */
+#define FIO2_MASKA_T		0xFFC0171C	/* Flag Mask Interrupt A Toggle register */
+#define FIO2_MASKB_D		0xFFC01720	/* Flag Mask Interrupt B Data register */
+#define FIO2_MASKB_C		0xFFC01724	/* Flag Mask Interrupt B Clear register */
+#define FIO2_MASKB_S		0xFFC01728	/* Flag Mask Interrupt B Set register */
+#define FIO2_MASKB_T		0xFFC0172C	/* Flag Mask Interrupt B Toggle register */
+#define FIO2_DIR		0xFFC01730	/* Flag Direction register */
+#define FIO2_POLAR		0xFFC01734	/* Flag Polarity register */
+#define FIO2_EDGE		0xFFC01738	/* Flag Interrupt Sensitivity register */
+#define FIO2_BOTH		0xFFC0173C	/* Flag Set on Both Edges register */
+#define FIO2_INEN		0xFFC01740	/* Flag Input Enable register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1		0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2		0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX		0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX		0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1		0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2		0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1		0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2		0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX		0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX		0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1		0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2		0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define EBIU_AMGCTL		0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_SDGCTL		0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL		0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC		0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT		0xFFC00A1C	/* SDRAM Status Register */
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define PPI0_CONTROL		0xFFC01000	/* PPI0 Control register */
+#define PPI0_STATUS		0xFFC01004	/* PPI0 Status register */
+#define PPI0_COUNT		0xFFC01008	/* PPI0 Transfer Count register */
+#define PPI0_DELAY		0xFFC0100C	/* PPI0 Delay Count register */
+#define PPI0_FRAME		0xFFC01010	/* PPI0 Frame Length register */
+
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define PPI1_CONTROL		0xFFC01300	/* PPI1 Control register */
+#define PPI1_STATUS		0xFFC01304	/* PPI1 Status register */
+#define PPI1_COUNT		0xFFC01308	/* PPI1 Transfer Count register */
+#define PPI1_DELAY		0xFFC0130C	/* PPI1 Delay Count register */
+#define PPI1_FRAME		0xFFC01310	/* PPI1 Frame Length register */
+
+/* DMA Traffic controls */
+#define DMA_TCPER		0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMA_TCCNT		0xFFC00B10	/* Traffic Control Current Counts Register */
+#define DMA_TC_PER		0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMA_TC_CNT		0xFFC00B10	/* Traffic Control Current Counts Register */
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define DMA1_0_CONFIG		0xFFC01C08	/* DMA1 Channel 0 Configuration register */
+#define DMA1_0_NEXT_DESC_PTR	0xFFC01C00	/* DMA1 Channel 0 Next Descripter Ptr Reg */
+#define DMA1_0_START_ADDR	0xFFC01C04	/* DMA1 Channel 0 Start Address */
+#define DMA1_0_X_COUNT		0xFFC01C10	/* DMA1 Channel 0 Inner Loop Count */
+#define DMA1_0_Y_COUNT		0xFFC01C18	/* DMA1 Channel 0 Outer Loop Count */
+#define DMA1_0_X_MODIFY		0xFFC01C14	/* DMA1 Channel 0 Inner Loop Addr Increment */
+#define DMA1_0_Y_MODIFY		0xFFC01C1C	/* DMA1 Channel 0 Outer Loop Addr Increment */
+#define DMA1_0_CURR_DESC_PTR	0xFFC01C20	/* DMA1 Channel 0 Current Descriptor Pointer */
+#define DMA1_0_CURR_ADDR	0xFFC01C24	/* DMA1 Channel 0 Current Address Pointer */
+#define DMA1_0_CURR_X_COUNT	0xFFC01C30	/* DMA1 Channel 0 Current Inner Loop Count */
+#define DMA1_0_CURR_Y_COUNT	0xFFC01C38	/* DMA1 Channel 0 Current Outer Loop Count */
+#define DMA1_0_IRQ_STATUS	0xFFC01C28	/* DMA1 Channel 0 Interrupt Status Register */
+#define DMA1_0_PERIPHERAL_MAP	0xFFC01C2C	/* DMA1 Channel 0 Peripheral Map Register */
+
+#define DMA1_1_CONFIG		0xFFC01C48	/* DMA1 Channel 1 Configuration register */
+#define DMA1_1_NEXT_DESC_PTR	0xFFC01C40	/* DMA1 Channel 1 Next Descripter Ptr Reg */
+#define DMA1_1_START_ADDR	0xFFC01C44	/* DMA1 Channel 1 Start Address */
+#define DMA1_1_X_COUNT		0xFFC01C50	/* DMA1 Channel 1 Inner Loop Count */
+#define DMA1_1_Y_COUNT		0xFFC01C58	/* DMA1 Channel 1 Outer Loop Count */
+#define DMA1_1_X_MODIFY		0xFFC01C54	/* DMA1 Channel 1 Inner Loop Addr Increment */
+#define DMA1_1_Y_MODIFY		0xFFC01C5C	/* DMA1 Channel 1 Outer Loop Addr Increment */
+#define DMA1_1_CURR_DESC_PTR	0xFFC01C60	/* DMA1 Channel 1 Current Descriptor Pointer */
+#define DMA1_1_CURR_ADDR	0xFFC01C64	/* DMA1 Channel 1 Current Address Pointer */
+#define DMA1_1_CURR_X_COUNT	0xFFC01C70	/* DMA1 Channel 1 Current Inner Loop Count */
+#define DMA1_1_CURR_Y_COUNT	0xFFC01C78	/* DMA1 Channel 1 Current Outer Loop Count */
+#define DMA1_1_IRQ_STATUS	0xFFC01C68	/* DMA1 Channel 1 Interrupt Status Register */
+#define DMA1_1_PERIPHERAL_MAP	0xFFC01C6C	/* DMA1 Channel 1 Peripheral Map Register */
+
+#define DMA1_2_CONFIG		0xFFC01C88	/* DMA1 Channel 2 Configuration register */
+#define DMA1_2_NEXT_DESC_PTR	0xFFC01C80	/* DMA1 Channel 2 Next Descripter Ptr Reg */
+#define DMA1_2_START_ADDR	0xFFC01C84	/* DMA1 Channel 2 Start Address */
+#define DMA1_2_X_COUNT		0xFFC01C90	/* DMA1 Channel 2 Inner Loop Count */
+#define DMA1_2_Y_COUNT		0xFFC01C98	/* DMA1 Channel 2 Outer Loop Count */
+#define DMA1_2_X_MODIFY		0xFFC01C94	/* DMA1 Channel 2 Inner Loop Addr Increment */
+#define DMA1_2_Y_MODIFY		0xFFC01C9C	/* DMA1 Channel 2 Outer Loop Addr Increment */
+#define DMA1_2_CURR_DESC_PTR	0xFFC01CA0	/* DMA1 Channel 2 Current Descriptor Pointer */
+#define DMA1_2_CURR_ADDR	0xFFC01CA4	/* DMA1 Channel 2 Current Address Pointer */
+#define DMA1_2_CURR_X_COUNT	0xFFC01CB0	/* DMA1 Channel 2 Current Inner Loop Count */
+#define DMA1_2_CURR_Y_COUNT	0xFFC01CB8	/* DMA1 Channel 2 Current Outer Loop Count */
+#define DMA1_2_IRQ_STATUS	0xFFC01CA8	/* DMA1 Channel 2 Interrupt Status Register */
+#define DMA1_2_PERIPHERAL_MAP	0xFFC01CAC	/* DMA1 Channel 2 Peripheral Map Register */
+
+#define DMA1_3_CONFIG		0xFFC01CC8	/* DMA1 Channel 3 Configuration register */
+#define DMA1_3_NEXT_DESC_PTR	0xFFC01CC0	/* DMA1 Channel 3 Next Descripter Ptr Reg */
+#define DMA1_3_START_ADDR	0xFFC01CC4	/* DMA1 Channel 3 Start Address */
+#define DMA1_3_X_COUNT		0xFFC01CD0	/* DMA1 Channel 3 Inner Loop Count */
+#define DMA1_3_Y_COUNT		0xFFC01CD8	/* DMA1 Channel 3 Outer Loop Count */
+#define DMA1_3_X_MODIFY		0xFFC01CD4	/* DMA1 Channel 3 Inner Loop Addr Increment */
+#define DMA1_3_Y_MODIFY		0xFFC01CDC	/* DMA1 Channel 3 Outer Loop Addr Increment */
+#define DMA1_3_CURR_DESC_PTR	0xFFC01CE0	/* DMA1 Channel 3 Current Descriptor Pointer */
+#define DMA1_3_CURR_ADDR	0xFFC01CE4	/* DMA1 Channel 3 Current Address Pointer */
+#define DMA1_3_CURR_X_COUNT	0xFFC01CF0	/* DMA1 Channel 3 Current Inner Loop Count */
+#define DMA1_3_CURR_Y_COUNT	0xFFC01CF8	/* DMA1 Channel 3 Current Outer Loop Count */
+#define DMA1_3_IRQ_STATUS	0xFFC01CE8	/* DMA1 Channel 3 Interrupt Status Register */
+#define DMA1_3_PERIPHERAL_MAP	0xFFC01CEC	/* DMA1 Channel 3 Peripheral Map Register */
+
+#define DMA1_4_CONFIG		0xFFC01D08	/* DMA1 Channel 4 Configuration register */
+#define DMA1_4_NEXT_DESC_PTR	0xFFC01D00	/* DMA1 Channel 4 Next Descripter Ptr Reg */
+#define DMA1_4_START_ADDR	0xFFC01D04	/* DMA1 Channel 4 Start Address */
+#define DMA1_4_X_COUNT		0xFFC01D10	/* DMA1 Channel 4 Inner Loop Count */
+#define DMA1_4_Y_COUNT		0xFFC01D18	/* DMA1 Channel 4 Outer Loop Count */
+#define DMA1_4_X_MODIFY		0xFFC01D14	/* DMA1 Channel 4 Inner Loop Addr Increment */
+#define DMA1_4_Y_MODIFY		0xFFC01D1C	/* DMA1 Channel 4 Outer Loop Addr Increment */
+#define DMA1_4_CURR_DESC_PTR	0xFFC01D20	/* DMA1 Channel 4 Current Descriptor Pointer */
+#define DMA1_4_CURR_ADDR	0xFFC01D24	/* DMA1 Channel 4 Current Address Pointer */
+#define DMA1_4_CURR_X_COUNT	0xFFC01D30	/* DMA1 Channel 4 Current Inner Loop Count */
+#define DMA1_4_CURR_Y_COUNT	0xFFC01D38	/* DMA1 Channel 4 Current Outer Loop Count */
+#define DMA1_4_IRQ_STATUS	0xFFC01D28	/* DMA1 Channel 4 Interrupt Status Register */
+#define DMA1_4_PERIPHERAL_MAP	0xFFC01D2C	/* DMA1 Channel 4 Peripheral Map Register */
+
+#define DMA1_5_CONFIG		0xFFC01D48	/* DMA1 Channel 5 Configuration register */
+#define DMA1_5_NEXT_DESC_PTR	0xFFC01D40	/* DMA1 Channel 5 Next Descripter Ptr Reg */
+#define DMA1_5_START_ADDR	0xFFC01D44	/* DMA1 Channel 5 Start Address */
+#define DMA1_5_X_COUNT		0xFFC01D50	/* DMA1 Channel 5 Inner Loop Count */
+#define DMA1_5_Y_COUNT		0xFFC01D58	/* DMA1 Channel 5 Outer Loop Count */
+#define DMA1_5_X_MODIFY		0xFFC01D54	/* DMA1 Channel 5 Inner Loop Addr Increment */
+#define DMA1_5_Y_MODIFY		0xFFC01D5C	/* DMA1 Channel 5 Outer Loop Addr Increment */
+#define DMA1_5_CURR_DESC_PTR	0xFFC01D60	/* DMA1 Channel 5 Current Descriptor Pointer */
+#define DMA1_5_CURR_ADDR	0xFFC01D64	/* DMA1 Channel 5 Current Address Pointer */
+#define DMA1_5_CURR_X_COUNT	0xFFC01D70	/* DMA1 Channel 5 Current Inner Loop Count */
+#define DMA1_5_CURR_Y_COUNT	0xFFC01D78	/* DMA1 Channel 5 Current Outer Loop Count */
+#define DMA1_5_IRQ_STATUS	0xFFC01D68	/* DMA1 Channel 5 Interrupt Status Register */
+#define DMA1_5_PERIPHERAL_MAP	0xFFC01D6C	/* DMA1 Channel 5 Peripheral Map Register */
+
+#define DMA1_6_CONFIG		0xFFC01D88	/* DMA1 Channel 6 Configuration register */
+#define DMA1_6_NEXT_DESC_PTR	0xFFC01D80	/* DMA1 Channel 6 Next Descripter Ptr Reg */
+#define DMA1_6_START_ADDR	0xFFC01D84	/* DMA1 Channel 6 Start Address */
+#define DMA1_6_X_COUNT		0xFFC01D90	/* DMA1 Channel 6 Inner Loop Count */
+#define DMA1_6_Y_COUNT		0xFFC01D98	/* DMA1 Channel 6 Outer Loop Count */
+#define DMA1_6_X_MODIFY		0xFFC01D94	/* DMA1 Channel 6 Inner Loop Addr Increment */
+#define DMA1_6_Y_MODIFY		0xFFC01D9C	/* DMA1 Channel 6 Outer Loop Addr Increment */
+#define DMA1_6_CURR_DESC_PTR	0xFFC01DA0	/* DMA1 Channel 6 Current Descriptor Pointer */
+#define DMA1_6_CURR_ADDR	0xFFC01DA4	/* DMA1 Channel 6 Current Address Pointer */
+#define DMA1_6_CURR_X_COUNT	0xFFC01DB0	/* DMA1 Channel 6 Current Inner Loop Count */
+#define DMA1_6_CURR_Y_COUNT	0xFFC01DB8	/* DMA1 Channel 6 Current Outer Loop Count */
+#define DMA1_6_IRQ_STATUS	0xFFC01DA8	/* DMA1 Channel 6 Interrupt Status Register */
+#define DMA1_6_PERIPHERAL_MAP	0xFFC01DAC	/* DMA1 Channel 6 Peripheral Map Register */
+
+#define DMA1_7_CONFIG		0xFFC01DC8	/* DMA1 Channel 7 Configuration register */
+#define DMA1_7_NEXT_DESC_PTR	0xFFC01DC0	/* DMA1 Channel 7 Next Descripter Ptr Reg */
+#define DMA1_7_START_ADDR	0xFFC01DC4	/* DMA1 Channel 7 Start Address */
+#define DMA1_7_X_COUNT		0xFFC01DD0	/* DMA1 Channel 7 Inner Loop Count */
+#define DMA1_7_Y_COUNT		0xFFC01DD8	/* DMA1 Channel 7 Outer Loop Count */
+#define DMA1_7_X_MODIFY		0xFFC01DD4	/* DMA1 Channel 7 Inner Loop Addr Increment */
+#define DMA1_7_Y_MODIFY		0xFFC01DDC	/* DMA1 Channel 7 Outer Loop Addr Increment */
+#define DMA1_7_CURR_DESC_PTR	0xFFC01DE0	/* DMA1 Channel 7 Current Descriptor Pointer */
+#define DMA1_7_CURR_ADDR	0xFFC01DE4	/* DMA1 Channel 7 Current Address Pointer */
+#define DMA1_7_CURR_X_COUNT	0xFFC01DF0	/* DMA1 Channel 7 Current Inner Loop Count */
+#define DMA1_7_CURR_Y_COUNT	0xFFC01DF8	/* DMA1 Channel 7 Current Outer Loop Count */
+#define DMA1_7_IRQ_STATUS	0xFFC01DE8	/* DMA1 Channel 7 Interrupt Status Register */
+#define DMA1_7_PERIPHERAL_MAP	0xFFC01DEC	/* DMA1 Channel 7 Peripheral Map Register */
+
+#define DMA1_8_CONFIG		0xFFC01E08	/* DMA1 Channel 8 Configuration register */
+#define DMA1_8_NEXT_DESC_PTR	0xFFC01E00	/* DMA1 Channel 8 Next Descripter Ptr Reg */
+#define DMA1_8_START_ADDR	0xFFC01E04	/* DMA1 Channel 8 Start Address */
+#define DMA1_8_X_COUNT		0xFFC01E10	/* DMA1 Channel 8 Inner Loop Count */
+#define DMA1_8_Y_COUNT		0xFFC01E18	/* DMA1 Channel 8 Outer Loop Count */
+#define DMA1_8_X_MODIFY		0xFFC01E14	/* DMA1 Channel 8 Inner Loop Addr Increment */
+#define DMA1_8_Y_MODIFY		0xFFC01E1C	/* DMA1 Channel 8 Outer Loop Addr Increment */
+#define DMA1_8_CURR_DESC_PTR	0xFFC01E20	/* DMA1 Channel 8 Current Descriptor Pointer */
+#define DMA1_8_CURR_ADDR	0xFFC01E24	/* DMA1 Channel 8 Current Address Pointer */
+#define DMA1_8_CURR_X_COUNT	0xFFC01E30	/* DMA1 Channel 8 Current Inner Loop Count */
+#define DMA1_8_CURR_Y_COUNT	0xFFC01E38	/* DMA1 Channel 8 Current Outer Loop Count */
+#define DMA1_8_IRQ_STATUS	0xFFC01E28	/* DMA1 Channel 8 Interrupt Status Register */
+#define DMA1_8_PERIPHERAL_MAP	0xFFC01E2C	/* DMA1 Channel 8 Peripheral Map Register */
+
+#define DMA1_9_CONFIG		0xFFC01E48	/* DMA1 Channel 9 Configuration register */
+#define DMA1_9_NEXT_DESC_PTR	0xFFC01E40	/* DMA1 Channel 9 Next Descripter Ptr Reg */
+#define DMA1_9_START_ADDR	0xFFC01E44	/* DMA1 Channel 9 Start Address */
+#define DMA1_9_X_COUNT		0xFFC01E50	/* DMA1 Channel 9 Inner Loop Count */
+#define DMA1_9_Y_COUNT		0xFFC01E58	/* DMA1 Channel 9 Outer Loop Count */
+#define DMA1_9_X_MODIFY		0xFFC01E54	/* DMA1 Channel 9 Inner Loop Addr Increment */
+#define DMA1_9_Y_MODIFY		0xFFC01E5C	/* DMA1 Channel 9 Outer Loop Addr Increment */
+#define DMA1_9_CURR_DESC_PTR	0xFFC01E60	/* DMA1 Channel 9 Current Descriptor Pointer */
+#define DMA1_9_CURR_ADDR	0xFFC01E64	/* DMA1 Channel 9 Current Address Pointer */
+#define DMA1_9_CURR_X_COUNT	0xFFC01E70	/* DMA1 Channel 9 Current Inner Loop Count */
+#define DMA1_9_CURR_Y_COUNT	0xFFC01E78	/* DMA1 Channel 9 Current Outer Loop Count */
+#define DMA1_9_IRQ_STATUS	0xFFC01E68	/* DMA1 Channel 9 Interrupt Status Register */
+#define DMA1_9_PERIPHERAL_MAP	0xFFC01E6C	/* DMA1 Channel 9 Peripheral Map Register */
+
+#define DMA1_10_CONFIG		0xFFC01E88	/* DMA1 Channel 10 Configuration register */
+#define DMA1_10_NEXT_DESC_PTR	0xFFC01E80	/* DMA1 Channel 10 Next Descripter Ptr Reg */
+#define DMA1_10_START_ADDR	0xFFC01E84	/* DMA1 Channel 10 Start Address */
+#define DMA1_10_X_COUNT		0xFFC01E90	/* DMA1 Channel 10 Inner Loop Count */
+#define DMA1_10_Y_COUNT		0xFFC01E98	/* DMA1 Channel 10 Outer Loop Count */
+#define DMA1_10_X_MODIFY	0xFFC01E94	/* DMA1 Channel 10 Inner Loop Addr Increment */
+#define DMA1_10_Y_MODIFY	0xFFC01E9C	/* DMA1 Channel 10 Outer Loop Addr Increment */
+#define DMA1_10_CURR_DESC_PTR	0xFFC01EA0	/* DMA1 Channel 10 Current Descriptor Pointer */
+#define DMA1_10_CURR_ADDR	0xFFC01EA4	/* DMA1 Channel 10 Current Address Pointer */
+#define DMA1_10_CURR_X_COUNT	0xFFC01EB0	/* DMA1 Channel 10 Current Inner Loop Count */
+#define DMA1_10_CURR_Y_COUNT	0xFFC01EB8	/* DMA1 Channel 10 Current Outer Loop Count */
+#define DMA1_10_IRQ_STATUS	0xFFC01EA8	/* DMA1 Channel 10 Interrupt Status Register */
+#define DMA1_10_PERIPHERAL_MAP	0xFFC01EAC	/* DMA1 Channel 10 Peripheral Map Register */
+
+#define DMA1_11_CONFIG		0xFFC01EC8	/* DMA1 Channel 11 Configuration register */
+#define DMA1_11_NEXT_DESC_PTR	0xFFC01EC0	/* DMA1 Channel 11 Next Descripter Ptr Reg */
+#define DMA1_11_START_ADDR	0xFFC01EC4	/* DMA1 Channel 11 Start Address */
+#define DMA1_11_X_COUNT		0xFFC01ED0	/* DMA1 Channel 11 Inner Loop Count */
+#define DMA1_11_Y_COUNT		0xFFC01ED8	/* DMA1 Channel 11 Outer Loop Count */
+#define DMA1_11_X_MODIFY	0xFFC01ED4	/* DMA1 Channel 11 Inner Loop Addr Increment */
+#define DMA1_11_Y_MODIFY	0xFFC01EDC	/* DMA1 Channel 11 Outer Loop Addr Increment */
+#define DMA1_11_CURR_DESC_PTR	0xFFC01EE0	/* DMA1 Channel 11 Current Descriptor Pointer */
+#define DMA1_11_CURR_ADDR	0xFFC01EE4	/* DMA1 Channel 11 Current Address Pointer */
+#define DMA1_11_CURR_X_COUNT	0xFFC01EF0	/* DMA1 Channel 11 Current Inner Loop Count */
+#define DMA1_11_CURR_Y_COUNT	0xFFC01EF8	/* DMA1 Channel 11 Current Outer Loop Count */
+#define DMA1_11_IRQ_STATUS	0xFFC01EE8	/* DMA1 Channel 11 Interrupt Status Register */
+#define DMA1_11_PERIPHERAL_MAP	0xFFC01EEC	/* DMA1 Channel 11 Peripheral Map Register */
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define MDMA1_D0_CONFIG		0xFFC01F08	/* MemDMA1 Stream 0 Destination Configuration */
+#define MDMA1_D0_NEXT_DESC_PTR	0xFFC01F00	/* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D0_START_ADDR	0xFFC01F04	/* MemDMA1 Stream 0 Destination Start Address */
+#define MDMA1_D0_X_COUNT	0xFFC01F10	/* MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA1_D0_Y_COUNT	0xFFC01F18	/* MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA1_D0_X_MODIFY	0xFFC01F14	/* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA1_D0_Y_MODIFY	0xFFC01F1C	/* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA1_D0_CURR_DESC_PTR	0xFFC01F20	/* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA1_D0_CURR_ADDR	0xFFC01F24	/* MemDMA1 Stream 0 Destination Current Address */
+#define MDMA1_D0_CURR_X_COUNT	0xFFC01F30	/* MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA1_D0_CURR_Y_COUNT	0xFFC01F38	/* MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA1_D0_IRQ_STATUS	0xFFC01F28	/* MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA1_D0_PERIPHERAL_MAP	0xFFC01F2C	/* MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA1_S0_CONFIG		0xFFC01F48	/* MemDMA1 Stream 0 Source Configuration */
+#define MDMA1_S0_NEXT_DESC_PTR	0xFFC01F40	/* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA1_S0_START_ADDR	0xFFC01F44	/* MemDMA1 Stream 0 Source Start Address */
+#define MDMA1_S0_X_COUNT	0xFFC01F50	/* MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA1_S0_Y_COUNT	0xFFC01F58	/* MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA1_S0_X_MODIFY	0xFFC01F54	/* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA1_S0_Y_MODIFY	0xFFC01F5C	/* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA1_S0_CURR_DESC_PTR	0xFFC01F60	/* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA1_S0_CURR_ADDR	0xFFC01F64	/* MemDMA1 Stream 0 Source Current Address */
+#define MDMA1_S0_CURR_X_COUNT	0xFFC01F70	/* MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA1_S0_CURR_Y_COUNT `	0xFFC01F78	/* MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA1_S0_IRQ_STATUS	0xFFC01F68	/* MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C	/* MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA1_D1_CONFIG		0xFFC01F88	/* MemDMA1 Stream 1 Destination Configuration */
+#define MDMA1_D1_NEXT_DESC_PTR	0xFFC01F80	/* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D1_START_ADDR	0xFFC01F84	/* MemDMA1 Stream 1 Destination Start Address */
+#define MDMA1_D1_X_COUNT	0xFFC01F90	/* MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA1_D1_Y_COUNT	0xFFC01F98	/* MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA1_D1_X_MODIFY	0xFFC01F94	/* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA1_D1_Y_MODIFY	0xFFC01F9C	/* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA1_D1_CURR_DESC_PTR	0xFFC01FA0	/* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA1_D1_CURR_ADDR	0xFFC01FA4	/* MemDMA1 Stream 1 Dest Current Address */
+#define MDMA1_D1_CURR_X_COUNT	0xFFC01FB0	/* MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA1_D1_CURR_Y_COUNT	0xFFC01FB8	/* MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA1_D1_IRQ_STATUS	0xFFC01FA8	/* MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC	/* MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA1_S1_CONFIG		0xFFC01FC8	/* MemDMA1 Stream 1 Source Configuration */
+#define MDMA1_S1_NEXT_DESC_PTR	0xFFC01FC0	/* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA1_S1_START_ADDR	0xFFC01FC4	/* MemDMA1 Stream 1 Source Start Address */
+#define MDMA1_S1_X_COUNT	0xFFC01FD0	/* MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA1_S1_Y_COUNT	0xFFC01FD8	/* MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA1_S1_X_MODIFY	0xFFC01FD4	/* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA1_S1_Y_MODIFY	0xFFC01FDC	/* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA1_S1_CURR_DESC_PTR	0xFFC01FE0	/* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA1_S1_CURR_ADDR	0xFFC01FE4	/* MemDMA1 Stream 1 Source Current Address */
+#define MDMA1_S1_CURR_X_COUNT	0xFFC01FF0	/* MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA1_S1_CURR_Y_COUNT	0xFFC01FF8	/* MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA1_S1_IRQ_STATUS	0xFFC01FE8	/* MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC	/* MemDMA1 Stream 1 Source Peripheral Map */
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define DMA2_0_CONFIG		0xFFC00C08	/* DMA2 Channel 0 Configuration register */
+#define DMA2_0_NEXT_DESC_PTR	0xFFC00C00	/* DMA2 Channel 0 Next Descripter Ptr Reg */
+#define DMA2_0_START_ADDR	0xFFC00C04	/* DMA2 Channel 0 Start Address */
+#define DMA2_0_X_COUNT		0xFFC00C10	/* DMA2 Channel 0 Inner Loop Count */
+#define DMA2_0_Y_COUNT		0xFFC00C18	/* DMA2 Channel 0 Outer Loop Count */
+#define DMA2_0_X_MODIFY		0xFFC00C14	/* DMA2 Channel 0 Inner Loop Addr Increment */
+#define DMA2_0_Y_MODIFY		0xFFC00C1C	/* DMA2 Channel 0 Outer Loop Addr Increment */
+#define DMA2_0_CURR_DESC_PTR	0xFFC00C20	/* DMA2 Channel 0 Current Descriptor Pointer */
+#define DMA2_0_CURR_ADDR	0xFFC00C24	/* DMA2 Channel 0 Current Address Pointer */
+#define DMA2_0_CURR_X_COUNT	0xFFC00C30	/* DMA2 Channel 0 Current Inner Loop Count */
+#define DMA2_0_CURR_Y_COUNT	0xFFC00C38	/* DMA2 Channel 0 Current Outer Loop Count */
+#define DMA2_0_IRQ_STATUS	0xFFC00C28	/* DMA2 Channel 0 Interrupt Status Register */
+#define DMA2_0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA2 Channel 0 Peripheral Map Register */
+
+#define DMA2_1_CONFIG		0xFFC00C48	/* DMA2 Channel 1 Configuration register */
+#define DMA2_1_NEXT_DESC_PTR	0xFFC00C40	/* DMA2 Channel 1 Next Descripter Ptr Reg */
+#define DMA2_1_START_ADDR	0xFFC00C44	/* DMA2 Channel 1 Start Address */
+#define DMA2_1_X_COUNT		0xFFC00C50	/* DMA2 Channel 1 Inner Loop Count */
+#define DMA2_1_Y_COUNT		0xFFC00C58	/* DMA2 Channel 1 Outer Loop Count */
+#define DMA2_1_X_MODIFY		0xFFC00C54	/* DMA2 Channel 1 Inner Loop Addr Increment */
+#define DMA2_1_Y_MODIFY		0xFFC00C5C	/* DMA2 Channel 1 Outer Loop Addr Increment */
+#define DMA2_1_CURR_DESC_PTR	0xFFC00C60	/* DMA2 Channel 1 Current Descriptor Pointer */
+#define DMA2_1_CURR_ADDR	0xFFC00C64	/* DMA2 Channel 1 Current Address Pointer */
+#define DMA2_1_CURR_X_COUNT	0xFFC00C70	/* DMA2 Channel 1 Current Inner Loop Count */
+#define DMA2_1_CURR_Y_COUNT	0xFFC00C78	/* DMA2 Channel 1 Current Outer Loop Count */
+#define DMA2_1_IRQ_STATUS	0xFFC00C68	/* DMA2 Channel 1 Interrupt Status Register */
+#define DMA2_1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA2 Channel 1 Peripheral Map Register */
+
+#define DMA2_2_CONFIG		0xFFC00C88	/* DMA2 Channel 2 Configuration register */
+#define DMA2_2_NEXT_DESC_PTR	0xFFC00C80	/* DMA2 Channel 2 Next Descripter Ptr Reg */
+#define DMA2_2_START_ADDR	0xFFC00C84	/* DMA2 Channel 2 Start Address */
+#define DMA2_2_X_COUNT		0xFFC00C90	/* DMA2 Channel 2 Inner Loop Count */
+#define DMA2_2_Y_COUNT		0xFFC00C98	/* DMA2 Channel 2 Outer Loop Count */
+#define DMA2_2_X_MODIFY		0xFFC00C94	/* DMA2 Channel 2 Inner Loop Addr Increment */
+#define DMA2_2_Y_MODIFY		0xFFC00C9C	/* DMA2 Channel 2 Outer Loop Addr Increment */
+#define DMA2_2_CURR_DESC_PTR	0xFFC00CA0	/* DMA2 Channel 2 Current Descriptor Pointer */
+#define DMA2_2_CURR_ADDR	0xFFC00CA4	/* DMA2 Channel 2 Current Address Pointer */
+#define DMA2_2_CURR_X_COUNT	0xFFC00CB0	/* DMA2 Channel 2 Current Inner Loop Count */
+#define DMA2_2_CURR_Y_COUNT	0xFFC00CB8	/* DMA2 Channel 2 Current Outer Loop Count */
+#define DMA2_2_IRQ_STATUS	0xFFC00CA8	/* DMA2 Channel 2 Interrupt Status Register */
+#define DMA2_2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA2 Channel 2 Peripheral Map Register */
+
+#define DMA2_3_CONFIG		0xFFC00CC8	/* DMA2 Channel 3 Configuration register */
+#define DMA2_3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA2 Channel 3 Next Descripter Ptr Reg */
+#define DMA2_3_START_ADDR	0xFFC00CC4	/* DMA2 Channel 3 Start Address */
+#define DMA2_3_X_COUNT		0xFFC00CD0	/* DMA2 Channel 3 Inner Loop Count */
+#define DMA2_3_Y_COUNT		0xFFC00CD8	/* DMA2 Channel 3 Outer Loop Count */
+#define DMA2_3_X_MODIFY		0xFFC00CD4	/* DMA2 Channel 3 Inner Loop Addr Increment */
+#define DMA2_3_Y_MODIFY		0xFFC00CDC	/* DMA2 Channel 3 Outer Loop Addr Increment */
+#define DMA2_3_CURR_DESC_PTR	0xFFC00CE0	/* DMA2 Channel 3 Current Descriptor Pointer */
+#define DMA2_3_CURR_ADDR	0xFFC00CE4	/* DMA2 Channel 3 Current Address Pointer */
+#define DMA2_3_CURR_X_COUNT	0xFFC00CF0	/* DMA2 Channel 3 Current Inner Loop Count */
+#define DMA2_3_CURR_Y_COUNT	0xFFC00CF8	/* DMA2 Channel 3 Current Outer Loop Count */
+#define DMA2_3_IRQ_STATUS	0xFFC00CE8	/* DMA2 Channel 3 Interrupt Status Register */
+#define DMA2_3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA2 Channel 3 Peripheral Map Register */
+
+#define DMA2_4_CONFIG		0xFFC00D08	/* DMA2 Channel 4 Configuration register */
+#define DMA2_4_NEXT_DESC_PTR	0xFFC00D00	/* DMA2 Channel 4 Next Descripter Ptr Reg */
+#define DMA2_4_START_ADDR	0xFFC00D04	/* DMA2 Channel 4 Start Address */
+#define DMA2_4_X_COUNT		0xFFC00D10	/* DMA2 Channel 4 Inner Loop Count */
+#define DMA2_4_Y_COUNT		0xFFC00D18	/* DMA2 Channel 4 Outer Loop Count */
+#define DMA2_4_X_MODIFY		0xFFC00D14	/* DMA2 Channel 4 Inner Loop Addr Increment */
+#define DMA2_4_Y_MODIFY		0xFFC00D1C	/* DMA2 Channel 4 Outer Loop Addr Increment */
+#define DMA2_4_CURR_DESC_PTR	0xFFC00D20	/* DMA2 Channel 4 Current Descriptor Pointer */
+#define DMA2_4_CURR_ADDR	0xFFC00D24	/* DMA2 Channel 4 Current Address Pointer */
+#define DMA2_4_CURR_X_COUNT	0xFFC00D30	/* DMA2 Channel 4 Current Inner Loop Count */
+#define DMA2_4_CURR_Y_COUNT	0xFFC00D38	/* DMA2 Channel 4 Current Outer Loop Count */
+#define DMA2_4_IRQ_STATUS	0xFFC00D28	/* DMA2 Channel 4 Interrupt Status Register */
+#define DMA2_4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA2 Channel 4 Peripheral Map Register */
+
+#define DMA2_5_CONFIG		0xFFC00D48	/* DMA2 Channel 5 Configuration register */
+#define DMA2_5_NEXT_DESC_PTR	0xFFC00D40	/* DMA2 Channel 5 Next Descripter Ptr Reg */
+#define DMA2_5_START_ADDR	0xFFC00D44	/* DMA2 Channel 5 Start Address */
+#define DMA2_5_X_COUNT		0xFFC00D50	/* DMA2 Channel 5 Inner Loop Count */
+#define DMA2_5_Y_COUNT		0xFFC00D58	/* DMA2 Channel 5 Outer Loop Count */
+#define DMA2_5_X_MODIFY		0xFFC00D54	/* DMA2 Channel 5 Inner Loop Addr Increment */
+#define DMA2_5_Y_MODIFY		0xFFC00D5C	/* DMA2 Channel 5 Outer Loop Addr Increment */
+#define DMA2_5_CURR_DESC_PTR	0xFFC00D60	/* DMA2 Channel 5 Current Descriptor Pointer */
+#define DMA2_5_CURR_ADDR	0xFFC00D64	/* DMA2 Channel 5 Current Address Pointer */
+#define DMA2_5_CURR_X_COUNT	0xFFC00D70	/* DMA2 Channel 5 Current Inner Loop Count */
+#define DMA2_5_CURR_Y_COUNT	0xFFC00D78	/* DMA2 Channel 5 Current Outer Loop Count */
+#define DMA2_5_IRQ_STATUS	0xFFC00D68	/* DMA2 Channel 5 Interrupt Status Register */
+#define DMA2_5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA2 Channel 5 Peripheral Map Register */
+
+#define DMA2_6_CONFIG		0xFFC00D88	/* DMA2 Channel 6 Configuration register */
+#define DMA2_6_NEXT_DESC_PTR	0xFFC00D80	/* DMA2 Channel 6 Next Descripter Ptr Reg */
+#define DMA2_6_START_ADDR	0xFFC00D84	/* DMA2 Channel 6 Start Address */
+#define DMA2_6_X_COUNT		0xFFC00D90	/* DMA2 Channel 6 Inner Loop Count */
+#define DMA2_6_Y_COUNT		0xFFC00D98	/* DMA2 Channel 6 Outer Loop Count */
+#define DMA2_6_X_MODIFY		0xFFC00D94	/* DMA2 Channel 6 Inner Loop Addr Increment */
+#define DMA2_6_Y_MODIFY		0xFFC00D9C	/* DMA2 Channel 6 Outer Loop Addr Increment */
+#define DMA2_6_CURR_DESC_PTR	0xFFC00DA0	/* DMA2 Channel 6 Current Descriptor Pointer */
+#define DMA2_6_CURR_ADDR	0xFFC00DA4	/* DMA2 Channel 6 Current Address Pointer */
+#define DMA2_6_CURR_X_COUNT	0xFFC00DB0	/* DMA2 Channel 6 Current Inner Loop Count */
+#define DMA2_6_CURR_Y_COUNT	0xFFC00DB8	/* DMA2 Channel 6 Current Outer Loop Count */
+#define DMA2_6_IRQ_STATUS	0xFFC00DA8	/* DMA2 Channel 6 Interrupt Status Register */
+#define DMA2_6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA2 Channel 6 Peripheral Map Register */
+
+#define DMA2_7_CONFIG		0xFFC00DC8	/* DMA2 Channel 7 Configuration register */
+#define DMA2_7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA2 Channel 7 Next Descripter Ptr Reg */
+#define DMA2_7_START_ADDR	0xFFC00DC4	/* DMA2 Channel 7 Start Address */
+#define DMA2_7_X_COUNT		0xFFC00DD0	/* DMA2 Channel 7 Inner Loop Count */
+#define DMA2_7_Y_COUNT		0xFFC00DD8	/* DMA2 Channel 7 Outer Loop Count */
+#define DMA2_7_X_MODIFY		0xFFC00DD4	/* DMA2 Channel 7 Inner Loop Addr Increment */
+#define DMA2_7_Y_MODIFY		0xFFC00DDC	/* DMA2 Channel 7 Outer Loop Addr Increment */
+#define DMA2_7_CURR_DESC_PTR	0xFFC00DE0	/* DMA2 Channel 7 Current Descriptor Pointer */
+#define DMA2_7_CURR_ADDR	0xFFC00DE4	/* DMA2 Channel 7 Current Address Pointer */
+#define DMA2_7_CURR_X_COUNT	0xFFC00DF0	/* DMA2 Channel 7 Current Inner Loop Count */
+#define DMA2_7_CURR_Y_COUNT	0xFFC00DF8	/* DMA2 Channel 7 Current Outer Loop Count */
+#define DMA2_7_IRQ_STATUS	0xFFC00DE8	/* DMA2 Channel 7 Interrupt Status Register */
+#define DMA2_7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA2 Channel 7 Peripheral Map Register */
+
+#define DMA2_8_CONFIG		0xFFC00E08	/* DMA2 Channel 8 Configuration register */
+#define DMA2_8_NEXT_DESC_PTR	0xFFC00E00	/* DMA2 Channel 8 Next Descripter Ptr Reg */
+#define DMA2_8_START_ADDR	0xFFC00E04	/* DMA2 Channel 8 Start Address */
+#define DMA2_8_X_COUNT		0xFFC00E10	/* DMA2 Channel 8 Inner Loop Count */
+#define DMA2_8_Y_COUNT		0xFFC00E18	/* DMA2 Channel 8 Outer Loop Count */
+#define DMA2_8_X_MODIFY		0xFFC00E14	/* DMA2 Channel 8 Inner Loop Addr Increment */
+#define DMA2_8_Y_MODIFY		0xFFC00E1C	/* DMA2 Channel 8 Outer Loop Addr Increment */
+#define DMA2_8_CURR_DESC_PTR	0xFFC00E20	/* DMA2 Channel 8 Current Descriptor Pointer */
+#define DMA2_8_CURR_ADDR	0xFFC00E24	/* DMA2 Channel 8 Current Address Pointer */
+#define DMA2_8_CURR_X_COUNT	0xFFC00E30	/* DMA2 Channel 8 Current Inner Loop Count */
+#define DMA2_8_CURR_Y_COUNT	0xFFC00E38	/* DMA2 Channel 8 Current Outer Loop Count */
+#define DMA2_8_IRQ_STATUS	0xFFC00E28	/* DMA2 Channel 8 Interrupt Status Register */
+#define DMA2_8_PERIPHERAL_MAP	0xFFC00E2C	/* DMA2 Channel 8 Peripheral Map Register */
+
+#define DMA2_9_CONFIG		0xFFC00E48	/* DMA2 Channel 9 Configuration register */
+#define DMA2_9_NEXT_DESC_PTR	0xFFC00E40	/* DMA2 Channel 9 Next Descripter Ptr Reg */
+#define DMA2_9_START_ADDR	0xFFC00E44	/* DMA2 Channel 9 Start Address */
+#define DMA2_9_X_COUNT		0xFFC00E50	/* DMA2 Channel 9 Inner Loop Count */
+#define DMA2_9_Y_COUNT		0xFFC00E58	/* DMA2 Channel 9 Outer Loop Count */
+#define DMA2_9_X_MODIFY		0xFFC00E54	/* DMA2 Channel 9 Inner Loop Addr Increment */
+#define DMA2_9_Y_MODIFY		0xFFC00E5C	/* DMA2 Channel 9 Outer Loop Addr Increment */
+#define DMA2_9_CURR_DESC_PTR	0xFFC00E60	/* DMA2 Channel 9 Current Descriptor Pointer */
+#define DMA2_9_CURR_ADDR	0xFFC00E64	/* DMA2 Channel 9 Current Address Pointer */
+#define DMA2_9_CURR_X_COUNT	0xFFC00E70	/* DMA2 Channel 9 Current Inner Loop Count */
+#define DMA2_9_CURR_Y_COUNT	0xFFC00E78	/* DMA2 Channel 9 Current Outer Loop Count */
+#define DMA2_9_IRQ_STATUS	0xFFC00E68	/* DMA2 Channel 9 Interrupt Status Register */
+#define DMA2_9_PERIPHERAL_MAP	0xFFC00E6C	/* DMA2 Channel 9 Peripheral Map Register */
+
+#define DMA2_10_CONFIG		0xFFC00E88	/* DMA2 Channel 10 Configuration register */
+#define DMA2_10_NEXT_DESC_PTR	0xFFC00E80	/* DMA2 Channel 10 Next Descripter Ptr Reg */
+#define DMA2_10_START_ADDR	0xFFC00E84	/* DMA2 Channel 10 Start Address */
+#define DMA2_10_X_COUNT		0xFFC00E90	/* DMA2 Channel 10 Inner Loop Count */
+#define DMA2_10_Y_COUNT		0xFFC00E98	/* DMA2 Channel 10 Outer Loop Count */
+#define DMA2_10_X_MODIFY	0xFFC00E94	/* DMA2 Channel 10 Inner Loop Addr Increment */
+#define DMA2_10_Y_MODIFY	0xFFC00E9C	/* DMA2 Channel 10 Outer Loop Addr Increment */
+#define DMA2_10_CURR_DESC_PTR	0xFFC00EA0	/* DMA2 Channel 10 Current Descriptor Pointer */
+#define DMA2_10_CURR_ADDR	0xFFC00EA4	/* DMA2 Channel 10 Current Address Pointer */
+#define DMA2_10_CURR_X_COUNT	0xFFC00EB0	/* DMA2 Channel 10 Current Inner Loop Count */
+#define DMA2_10_CURR_Y_COUNT	0xFFC00EB8	/* DMA2 Channel 10 Current Outer Loop Count */
+#define DMA2_10_IRQ_STATUS	0xFFC00EA8	/* DMA2 Channel 10 Interrupt Status Register */
+#define DMA2_10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA2 Channel 10 Peripheral Map Register */
+
+#define DMA2_11_CONFIG		0xFFC00EC8	/* DMA2 Channel 11 Configuration register */
+#define DMA2_11_NEXT_DESC_PTR	0xFFC00EC0	/* DMA2 Channel 11 Next Descripter Ptr Reg */
+#define DMA2_11_START_ADDR	0xFFC00EC4	/* DMA2 Channel 11 Start Address */
+#define DMA2_11_X_COUNT		0xFFC00ED0	/* DMA2 Channel 11 Inner Loop Count */
+#define DMA2_11_Y_COUNT		0xFFC00ED8	/* DMA2 Channel 11 Outer Loop Count */
+#define DMA2_11_X_MODIFY	0xFFC00ED4	/* DMA2 Channel 11 Inner Loop Addr Increment */
+#define DMA2_11_Y_MODIFY	0xFFC00EDC	/* DMA2 Channel 11 Outer Loop Addr Increment */
+#define DMA2_11_CURR_DESC_PTR	0xFFC00EE0	/* DMA2 Channel 11 Current Descriptor Pointer */
+#define DMA2_11_CURR_ADDR	0xFFC00EE4	/* DMA2 Channel 11 Current Address Pointer */
+#define DMA2_11_CURR_X_COUNT	0xFFC00EF0	/* DMA2 Channel 11 Current Inner Loop Count */
+#define DMA2_11_CURR_Y_COUNT	0xFFC00EF8	/* DMA2 Channel 11 Current Outer Loop Count */
+#define DMA2_11_IRQ_STATUS	0xFFC00EE8	/* DMA2 Channel 11 Interrupt Status Register */
+#define DMA2_11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA2 Channel 11 Peripheral Map Register */
+
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define MDMA2_D0_CONFIG		0xFFC00F08	/* MemDMA2 Stream 0 Destination Configuration register */
+#define MDMA2_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D0_START_ADDR	0xFFC00F04	/* MemDMA2 Stream 0 Destination Start Address */
+#define MDMA2_D0_X_COUNT	0xFFC00F10	/* MemDMA2 Stream 0 Dest Inner-Loop Count register */
+#define MDMA2_D0_Y_COUNT	0xFFC00F18	/* MemDMA2 Stream 0 Dest Outer-Loop Count register */
+#define MDMA2_D0_X_MODIFY	0xFFC00F14	/* MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA2_D0_Y_MODIFY	0xFFC00F1C	/* MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA2_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA2_D0_CURR_ADDR	0xFFC00F24	/* MemDMA2 Stream 0 Destination Current Address */
+#define MDMA2_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
+#define MDMA2_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
+#define MDMA2_D0_IRQ_STATUS	0xFFC00F28	/* MemDMA2 Stream 0 Dest Interrupt/Status Register */
+#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C	/* MemDMA2 Stream 0 Destination Peripheral Map register */
+
+#define MDMA2_S0_CONFIG		0xFFC00F48	/* MemDMA2 Stream 0 Source Configuration register */
+#define MDMA2_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA2_S0_START_ADDR	0xFFC00F44	/* MemDMA2 Stream 0 Source Start Address */
+#define MDMA2_S0_X_COUNT	0xFFC00F50	/* MemDMA2 Stream 0 Source Inner-Loop Count register */
+#define MDMA2_S0_Y_COUNT	0xFFC00F58	/* MemDMA2 Stream 0 Source Outer-Loop Count register */
+#define MDMA2_S0_X_MODIFY	0xFFC00F54	/* MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
+#define MDMA2_S0_Y_MODIFY	0xFFC00F5C	/* MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
+#define MDMA2_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA2_S0_CURR_ADDR	0xFFC00F64	/* MemDMA2 Stream 0 Source Current Address */
+#define MDMA2_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
+#define MDMA2_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
+#define MDMA2_S0_IRQ_STATUS	0xFFC00F68	/* MemDMA2 Stream 0 Source Interrupt/Status Register */
+#define MDMA2_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA2 Stream 0 Source Peripheral Map register */
+
+#define MDMA2_D1_CONFIG		0xFFC00F88	/* MemDMA2 Stream 1 Destination Configuration register */
+#define MDMA2_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D1_START_ADDR	0xFFC00F84	/* MemDMA2 Stream 1 Destination Start Address */
+#define MDMA2_D1_X_COUNT	0xFFC00F90	/* MemDMA2 Stream 1 Dest Inner-Loop Count register */
+#define MDMA2_D1_Y_COUNT	0xFFC00F98	/* MemDMA2 Stream 1 Dest Outer-Loop Count register */
+#define MDMA2_D1_X_MODIFY	0xFFC00F94	/* MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA2_D1_Y_MODIFY	0xFFC00F9C	/* MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA2_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA2 Stream 1 Destination Current Descriptor Ptr */
+#define MDMA2_D1_CURR_ADDR	0xFFC00FA4	/* MemDMA2 Stream 1 Destination Current Address reg */
+#define MDMA2_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
+#define MDMA2_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
+#define MDMA2_D1_IRQ_STATUS	0xFFC00FA8	/* MemDMA2 Stream 1 Destination Interrupt/Status Reg */
+#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC	/* MemDMA2 Stream 1 Destination Peripheral Map register */
+
+#define MDMA2_S1_CONFIG		0xFFC00FC8	/* MemDMA2 Stream 1 Source Configuration register */
+#define MDMA2_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA2_S1_START_ADDR	0xFFC00FC4	/* MemDMA2 Stream 1 Source Start Address */
+#define MDMA2_S1_X_COUNT	0xFFC00FD0	/* MemDMA2 Stream 1 Source Inner-Loop Count register */
+#define MDMA2_S1_Y_COUNT	0xFFC00FD8	/* MemDMA2 Stream 1 Source Outer-Loop Count register */
+#define MDMA2_S1_X_MODIFY	0xFFC00FD4	/* MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
+#define MDMA2_S1_Y_MODIFY	0xFFC00FDC	/* MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA2_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA2_S1_CURR_ADDR	0xFFC00FE4	/* MemDMA2 Stream 1 Source Current Address */
+#define MDMA2_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA2 Stream 1 Source Current Inner-Loop Count */
+#define MDMA2_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA2 Stream 1 Source Current Outer-Loop Count */
+#define MDMA2_S1_IRQ_STATUS	0xFFC00FE8	/* MemDMA2 Stream 1 Source Interrupt/Status Register */
+#define MDMA2_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA2 Stream 1 Source Peripheral Map register */
+
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define IMDMA_D0_CONFIG		0xFFC01808	/* IMDMA Stream 0 Destination Configuration */
+#define IMDMA_D0_NEXT_DESC_PTR	0xFFC01800	/* IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D0_START_ADDR	0xFFC01804	/* IMDMA Stream 0 Destination Start Address */
+#define IMDMA_D0_X_COUNT	0xFFC01810	/* IMDMA Stream 0 Destination Inner-Loop Count */
+#define IMDMA_D0_Y_COUNT	0xFFC01818	/* IMDMA Stream 0 Destination Outer-Loop Count */
+#define IMDMA_D0_X_MODIFY	0xFFC01814	/* IMDMA Stream 0 Dest Inner-Loop Address-Increment */
+#define IMDMA_D0_Y_MODIFY	0xFFC0181C	/* IMDMA Stream 0 Dest Outer-Loop Address-Increment */
+#define IMDMA_D0_CURR_DESC_PTR	0xFFC01820	/* IMDMA Stream 0 Destination Current Descriptor Ptr */
+#define IMDMA_D0_CURR_ADDR	0xFFC01824	/* IMDMA Stream 0 Destination Current Address */
+#define IMDMA_D0_CURR_X_COUNT	0xFFC01830	/* IMDMA Stream 0 Destination Current Inner-Loop Count */
+#define IMDMA_D0_CURR_Y_COUNT	0xFFC01838	/* IMDMA Stream 0 Destination Current Outer-Loop Count */
+#define IMDMA_D0_IRQ_STATUS	0xFFC01828	/* IMDMA Stream 0 Destination Interrupt/Status */
+
+#define IMDMA_S0_CONFIG		0xFFC01848	/* IMDMA Stream 0 Source Configuration */
+#define IMDMA_S0_NEXT_DESC_PTR	0xFFC01840	/* IMDMA Stream 0 Source Next Descriptor Ptr Reg */
+#define IMDMA_S0_START_ADDR	0xFFC01844	/* IMDMA Stream 0 Source Start Address */
+#define IMDMA_S0_X_COUNT	0xFFC01850	/* IMDMA Stream 0 Source Inner-Loop Count */
+#define IMDMA_S0_Y_COUNT	0xFFC01858	/* IMDMA Stream 0 Source Outer-Loop Count */
+#define IMDMA_S0_X_MODIFY	0xFFC01854	/* IMDMA Stream 0 Source Inner-Loop Address-Increment */
+#define IMDMA_S0_Y_MODIFY	0xFFC0185C	/* IMDMA Stream 0 Source Outer-Loop Address-Increment */
+#define IMDMA_S0_CURR_DESC_PTR	0xFFC01860	/* IMDMA Stream 0 Source Current Descriptor Ptr reg */
+#define IMDMA_S0_CURR_ADDR	0xFFC01864	/* IMDMA Stream 0 Source Current Address */
+#define IMDMA_S0_CURR_X_COUNT	0xFFC01870	/* IMDMA Stream 0 Source Current Inner-Loop Count */
+#define IMDMA_S0_CURR_Y_COUNT	0xFFC01878	/* IMDMA Stream 0 Source Current Outer-Loop Count */
+#define IMDMA_S0_IRQ_STATUS	0xFFC01868	/* IMDMA Stream 0 Source Interrupt/Status */
+
+#define IMDMA_D1_CONFIG		0xFFC01888	/* IMDMA Stream 1 Destination Configuration */
+#define IMDMA_D1_NEXT_DESC_PTR	0xFFC01880	/* IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D1_START_ADDR	0xFFC01884	/* IMDMA Stream 1 Destination Start Address */
+#define IMDMA_D1_X_COUNT	0xFFC01890	/* IMDMA Stream 1 Destination Inner-Loop Count */
+#define IMDMA_D1_Y_COUNT	0xFFC01898	/* IMDMA Stream 1 Destination Outer-Loop Count */
+#define IMDMA_D1_X_MODIFY	0xFFC01894	/* IMDMA Stream 1 Dest Inner-Loop Address-Increment */
+#define IMDMA_D1_Y_MODIFY	0xFFC0189C	/* IMDMA Stream 1 Dest Outer-Loop Address-Increment */
+#define IMDMA_D1_CURR_DESC_PTR	0xFFC018A0	/* IMDMA Stream 1 Destination Current Descriptor Ptr */
+#define IMDMA_D1_CURR_ADDR	0xFFC018A4	/* IMDMA Stream 1 Destination Current Address */
+#define IMDMA_D1_CURR_X_COUNT	0xFFC018B0	/* IMDMA Stream 1 Destination Current Inner-Loop Count */
+#define IMDMA_D1_CURR_Y_COUNT	0xFFC018B8	/* IMDMA Stream 1 Destination Current Outer-Loop Count */
+#define IMDMA_D1_IRQ_STATUS	0xFFC018A8	/* IMDMA Stream 1 Destination Interrupt/Status */
+
+#define IMDMA_S1_CONFIG		0xFFC018C8	/* IMDMA Stream 1 Source Configuration */
+#define IMDMA_S1_NEXT_DESC_PTR	0xFFC018C0	/* IMDMA Stream 1 Source Next Descriptor Ptr Reg */
+#define IMDMA_S1_START_ADDR	0xFFC018C4	/* IMDMA Stream 1 Source Start Address */
+#define IMDMA_S1_X_COUNT	0xFFC018D0	/* IMDMA Stream 1 Source Inner-Loop Count */
+#define IMDMA_S1_Y_COUNT	0xFFC018D8	/* IMDMA Stream 1 Source Outer-Loop Count */
+#define IMDMA_S1_X_MODIFY	0xFFC018D4	/* IMDMA Stream 1 Source Inner-Loop Address-Increment */
+#define IMDMA_S1_Y_MODIFY	0xFFC018DC	/* IMDMA Stream 1 Source Outer-Loop Address-Increment */
+#define IMDMA_S1_CURR_DESC_PTR	0xFFC018E0	/* IMDMA Stream 1 Source Current Descriptor Ptr reg */
+#define IMDMA_S1_CURR_ADDR	0xFFC018E4	/* IMDMA Stream 1 Source Current Address */
+#define IMDMA_S1_CURR_X_COUNT	0xFFC018F0	/* IMDMA Stream 1 Source Current Inner-Loop Count */
+#define IMDMA_S1_CURR_Y_COUNT	0xFFC018F8	/* IMDMA Stream 1 Source Current Outer-Loop Count */
+#define IMDMA_S1_IRQ_STATUS	0xFFC018E8	/* IMDMA Stream 1 Source Interrupt/Status */
+
+/*
+ * System MMR Register Bits
+ */
+
+/* PLL AND RESET MASKS */
+
+/* PLL_CTL Masks */
+#define PLL_CLKIN		0x00000000	/* Pass CLKIN to PLL */
+#define PLL_CLKIN_DIV2		0x00000001	/* Pass CLKIN/2 to PLL */
+#define PLL_OFF			0x00000002	/* Shut off PLL clocks */
+#define STOPCK_OFF		0x00000008	/* Core clock off */
+#define PDWN			0x00000020	/* Put the PLL in a Deep Sleep state */
+#define BYPASS			0x00000100	/* Bypass the PLL */
+
+/* PLL_DIV Masks */
+
+#define SCLK_DIV(x)		(x)		/* SCLK = VCO / x */
+
+#define CCLK_DIV1		0x00000000	/* CCLK = VCO / 1 */
+#define CCLK_DIV2		0x00000010	/* CCLK = VCO / 2 */
+#define CCLK_DIV4		0x00000020	/* CCLK = VCO / 4 */
+#define CCLK_DIV8		0x00000030	/* CCLK = VCO / 8 */
+
+/* SWRST Mask */
+#define SYSTEM_RESET		0x00000007	/* Initiates a system software reset */
+#define SWRST_DBL_FAULT_B	0x00000800	/* SWRST Core B Double Fault */
+#define SWRST_DBL_FAULT_A	0x00001000	/* SWRST Core A Double Fault */
+#define SWRST_WDT_B		0x00002000	/* SWRST Watchdog B */
+#define SWRST_WDT_A		0x00004000	/* SWRST Watchdog A */
+#define SWRST_OCCURRED		0x00008000	/* SWRST Status */
+
+/*
+ * SYSTEM INTERRUPT CONTROLLER MASKS
+ * SICu_IARv Masks
+ * u = A or B
+ * v = 0 to 7
+ * w = 0 or 1
+
+ * Per_number = 0 to 63
+ * IVG_number = 7 to 15
+ * Peripheral #Per_number assigned IVG #IVG_number
+ * Usage:
+ *      r0.l = lo(Peripheral_IVG(62, 10));
+ *      r0.h = hi(Peripheral_IVG(62, 10));
+ */
+#define Peripheral_IVG(Per_number, IVG_number)    \
+				( (IVG_number) -7) << ( ((Per_number)%8) *4)
+
+/* SICx_IMASKw Masks */
+/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */
+#define SIC_UNMASK_ALL		0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL		0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)		(1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x)		(0xFFFFFFFF ^ (1 << (x)))/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL		0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL		0xFFFFFFFF	/* Wakeup Enable all peripherals */
+/* x = pos 0 to 31, for 32-63 use value-32 */
+#define IWR_ENABLE(x)		(1 << (x))	/* Wakeup Enable Peripheral #x */
+/* Wakeup Disable Peripheral #x */
+#define IWR_DISABLE(x)		(0xFFFFFFFF ^ (1 << (x)))
+
+/*
+ * WATCHDOG TIMER MASKS
+ */
+
+/* Watchdog Timer WDOG_CTL Register */
+#define	WDOGA_CTL		0xFFC00200
+#define	WDOGA_CNT		0xFFC00204
+#define	WDOGA_STAT		0xFFC00208
+#define	WDOGB_CTL		0xFFC01200
+#define	WDOGB_CNT		0xFFC01204
+#define	WDOGB_STAT		0xFFC01208
+#define ICTL(x)			((x<<1) & 0x0006)
+#define ENABLE_RESET		0x00000000	/* Set Watchdog Timer to generate reset */
+#define ENABLE_NMI		0x00000002	/* Set Watchdog Timer to generate non-maskable interrupt */
+#define ENABLE_GPI		0x00000004	/* Set Watchdog Timer to generate general-purpose interrupt */
+#define DISABLE_EVT		0x00000006	/* Disable Watchdog Timer interrupts */
+
+#define TMR_EN			0x0000
+#define TMR_DIS			0x0AD0
+#define TRO			0x8000
+
+#define ICTL_P0			0x01
+#define ICTL_P1			0x02
+#define TRO_P			0x0F
+
+/*
+ * UART CONTROLLER MASKS
+ */
+
+/* UART_LCR Register */
+
+#define DLAB			0x80
+#define SB			0x40
+#define STP			0x20
+#define EPS			0x10
+#define PEN			0x08
+#define STB			0x04
+#define WLS(x)			((x-5) & 0x03)
+
+#define DLAB_P			0x07
+#define SB_P			0x06
+#define STP_P			0x05
+#define EPS_P			0x04
+#define PEN_P			0x03
+#define STB_P			0x02
+#define WLS_P1			0x01
+#define WLS_P0			0x00
+
+/* UART_MCR Register */
+#define LOOP_ENA		0x10
+#define LOOP_ENA_P		0x04
+
+/* UART_LSR Register */
+#define TEMT			0x40
+#define THRE			0x20
+#define BI			0x10
+#define FE			0x08
+#define PE			0x04
+#define OE			0x02
+#define DR			0x01
+
+#define TEMP_P			0x06
+#define THRE_P			0x05
+#define BI_P			0x04
+#define FE_P			0x03
+#define PE_P			0x02
+#define OE_P			0x01
+#define DR_P			0x00
+
+/* UART_IER Register */
+#define ELSI			0x04
+#define ETBEI			0x02
+#define ERBFI			0x01
+
+#define ELSI_P			0x02
+#define ETBEI_P			0x01
+#define ERBFI_P			0x00
+
+/* UART_IIR Register */
+#define STATUS(x)		((x << 1) & 0x06)
+#define NINT			0x01
+#define STATUS_P1		0x02
+#define STATUS_P0		0x01
+#define NINT_P			0x00
+
+/* UART_GCTL Register */
+#define FFE			0x20
+#define FPE			0x10
+#define RPOLC			0x08
+#define TPOLC			0x04
+#define IREN			0x02
+#define UCEN			0x01
+
+#define FFE_P			0x05
+#define FPE_P			0x04
+#define RPOLC_P			0x03
+#define TPOLC_P			0x02
+#define IREN_P			0x01
+#define UCEN_P			0x00
+
+/*
+ * SERIAL PORT MASKS
+ */
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN			0x0001	/* TX enable */
+#define ITCLK			0x0002	/* Internal TX Clock Select */
+#define TDTYPE			0x000C	/* TX Data Formatting Select */
+#define TLSBIT			0x0010	/* TX Bit Order */
+#define ITFS			0x0200	/* Internal TX Frame Sync Select */
+#define TFSR			0x0400	/* TX Frame Sync Required Select */
+#define DITFS			0x0800	/* Data Independent TX Frame Sync Select */
+#define LTFS			0x1000	/* Low TX Frame Sync Select */
+#define LATFS			0x2000	/* Late TX Frame Sync Select */
+#define TCKFE			0x4000	/* TX Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks */
+#define SLEN			0x001F	/* TX Word Length */
+#define TXSE			0x0100	/* TX Secondary Enable */
+#define TSFSE			0x0200	/* TX Stereo Frame Sync Enable */
+#define TRFST			0x0400	/* TX Right-First Data Order */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN			0x0001	/* RX enable */
+#define IRCLK			0x0002	/* Internal RX Clock Select */
+#define RDTYPE			0x000C	/* RX Data Formatting Select */
+#define RULAW			0x0008	/* u-Law enable */
+#define RALAW			0x000C	/* A-Law enable */
+#define RLSBIT			0x0010	/* RX Bit Order */
+#define IRFS			0x0200	/* Internal RX Frame Sync Select */
+#define RFSR			0x0400	/* RX Frame Sync Required Select */
+#define LRFS			0x1000	/* Low RX Frame Sync Select */
+#define LARFS			0x2000	/* Late RX Frame Sync Select */
+#define RCKFE			0x4000	/* RX Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN			0x001F	/* RX Word Length */
+#define RXSE			0x0100	/* RX Secondary Enable */
+#define RSFSE			0x0200	/* RX Stereo Frame Sync Enable */
+#define RRFST			0x0400	/* Right-First Data Order */
+
+/* SPORTx_STAT Masks */
+#define RXNE			0x0001	/* RX FIFO Not Empty Status */
+#define RUVF			0x0002	/* RX Underflow Status */
+#define ROVF			0x0004	/* RX Overflow Status */
+#define TXF			0x0008	/* TX FIFO Full Status */
+#define TUVF			0x0010	/* TX Underflow Status */
+#define TOVF			0x0020	/* TX Overflow Status */
+#define TXHRE			0x0040	/* TX Hold Register Empty */
+
+/* SPORTx_MCMC1 Masks */
+#define WSIZE			0x0000F000	/* Multichannel Window Size Field */
+#define WOFF			0x000003FF	/* Multichannel Window Offset Field */
+
+/* SPORTx_MCMC2 Masks */
+#define MCCRM			0x00000003	/* Multichannel Clock Recovery Mode */
+#define MCDTXPE			0x00000004	/* Multichannel DMA Transmit Packing */
+#define MCDRXPE			0x00000008	/* Multichannel DMA Receive Packing */
+#define MCMEN			0x00000010	/* Multichannel Frame Mode Enable */
+#define FSDR			0x00000080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD			0x0000F000	/* Multichannel Frame Delay */
+
+/*
+ * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS
+ */
+
+/* PPI_CONTROL Masks */
+#define PORT_EN			0x00000001	/* PPI Port Enable */
+#define PORT_DIR		0x00000002	/* PPI Port Direction */
+#define XFR_TYPE		0x0000000C	/* PPI Transfer Type */
+#define PORT_CFG		0x00000030	/* PPI Port Configuration */
+#define FLD_SEL			0x00000040	/* PPI Active Field Select */
+#define PACK_EN			0x00000080	/* PPI Packing Mode */
+#define DMA32			0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN			0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO			0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH			0x00003800	/* PPI Data Length */
+#define DLEN_8			0x0		/* PPI Data Length mask for DLEN=8 */
+#define DLEN(x)			(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define POL			0x0000C000	/* PPI Signal Polarities */
+
+/* PPI_STATUS Masks */
+#define FLD			0x00000400	/* Field Indicator */
+#define FT_ERR			0x00000800	/* Frame Track Error */
+#define OVR			0x00001000	/* FIFO Overflow Error */
+#define UNDR			0x00002000	/* FIFO Underrun Error */
+#define ERR_DET			0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR		0x00008000	/* Error Not Corrected Indicator */
+
+/*
+ * DMA CONTROLLER MASKS
+ */
+
+/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
+#define DMAEN			0x00000001	/* Channel Enable */
+#define WNR			0x00000002	/* Channel Direction (W/R*) */
+#define WDSIZE_8		0x00000000	/* Word Size 8 bits */
+#define WDSIZE_16		0x00000004	/* Word Size 16 bits */
+#define WDSIZE_32		0x00000008	/* Word Size 32 bits */
+#define DMA2D			0x00000010	/* 2D/1D* Mode */
+#define RESTART			0x00000020	/* Restart */
+#define DI_SEL			0x00000040	/* Data Interrupt Select */
+#define DI_EN			0x00000080	/* Data Interrupt Enable */
+#define NDSIZE			0x00000900	/* Next Descriptor Size */
+#define FLOW			0x00007000	/* Flow Control */
+
+#define DMAEN_P			0		/* Channel Enable */
+#define WNR_P			1		/* Channel Direction (W/R*) */
+#define DMA2D_P			4		/* 2D/1D* Mode */
+#define RESTART_P		5		/* Restart */
+#define DI_SEL_P		6		/* Data Interrupt Select */
+#define DI_EN_P			7		/* Data Interrupt Enable */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
+
+#define DMA_DONE		0x00000001	/* DMA Done Indicator */
+#define DMA_ERR			0x00000002	/* DMA Error Indicator */
+#define DFETCH			0x00000004	/* Descriptor Fetch Indicator */
+#define DMA_RUN			0x00000008	/* DMA Running Indicator */
+
+#define DMA_DONE_P		0		/* DMA Done Indicator */
+#define DMA_ERR_P		1		/* DMA Error Indicator */
+#define DFETCH_P		2		/* Descriptor Fetch Indicator */
+#define DMA_RUN_P		3		/* DMA Running Indicator */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE			0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P			6		/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8			0x00000080	/* DMA 8-bit Operation Indicator */
+#define PCAP16			0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32			0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR			0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD			0x00000800	/* DMA Read Operation Indicator */
+#define PMAP			0x00007000	/* DMA Peripheral Map Field */
+
+/*
+ * GENERAL PURPOSE TIMER MASKS
+ */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0			0x0001
+#define TIMEN1			0x0002
+#define TIMEN2			0x0004
+#define TIMEN3			0x0008
+#define TIMEN4			0x0010
+#define TIMEN5			0x0020
+#define TIMEN6			0x0040
+#define TIMEN7			0x0080
+#define TIMEN8			0x0001
+#define TIMEN9			0x0002
+#define TIMEN10			0x0004
+#define TIMEN11			0x0008
+
+#define TIMEN0_P		0x00
+#define TIMEN1_P		0x01
+#define TIMEN2_P		0x02
+#define TIMEN3_P		0x03
+#define TIMEN4_P		0x04
+#define TIMEN5_P		0x05
+#define TIMEN6_P		0x06
+#define TIMEN7_P		0x07
+#define TIMEN8_P		0x00
+#define TIMEN9_P		0x01
+#define TIMEN10_P		0x02
+#define TIMEN11_P		0x03
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0			0x0001
+#define TIMDIS1			0x0002
+#define TIMDIS2			0x0004
+#define TIMDIS3			0x0008
+#define TIMDIS4			0x0010
+#define TIMDIS5			0x0020
+#define TIMDIS6			0x0040
+#define TIMDIS7			0x0080
+#define TIMDIS8			0x0001
+#define TIMDIS9			0x0002
+#define TIMDIS10		0x0004
+#define TIMDIS11		0x0008
+
+#define TIMDIS0_P		0x00
+#define TIMDIS1_P		0x01
+#define TIMDIS2_P		0x02
+#define TIMDIS3_P		0x03
+#define TIMDIS4_P		0x04
+#define TIMDIS5_P		0x05
+#define TIMDIS6_P		0x06
+#define TIMDIS7_P		0x07
+#define TIMDIS8_P		0x00
+#define TIMDIS9_P		0x01
+#define TIMDIS10_P		0x02
+#define TIMDIS11_P		0x03
+
+/* TIMER_STATUS Register */
+#define TIMIL0			0x00000001
+#define TIMIL1			0x00000002
+#define TIMIL2			0x00000004
+#define TIMIL3			0x00000008
+#define TIMIL4			0x00010000
+#define TIMIL5			0x00020000
+#define TIMIL6			0x00040000
+#define TIMIL7			0x00080000
+#define TIMIL8			0x0001
+#define TIMIL9			0x0002
+#define TIMIL10			0x0004
+#define TIMIL11			0x0008
+#define TOVL_ERR0		0x00000010
+#define TOVL_ERR1		0x00000020
+#define TOVL_ERR2		0x00000040
+#define TOVL_ERR3		0x00000080
+#define TOVL_ERR4		0x00100000
+#define TOVL_ERR5		0x00200000
+#define TOVL_ERR6		0x00400000
+#define TOVL_ERR7		0x00800000
+#define TOVL_ERR8		0x0010
+#define TOVL_ERR9		0x0020
+#define TOVL_ERR10		0x0040
+#define TOVL_ERR11		0x0080
+#define TRUN0			0x00001000
+#define TRUN1			0x00002000
+#define TRUN2			0x00004000
+#define TRUN3			0x00008000
+#define TRUN4			0x10000000
+#define TRUN5			0x20000000
+#define TRUN6			0x40000000
+#define TRUN7			0x80000000
+#define TRUN8			0x1000
+#define TRUN9			0x2000
+#define TRUN10			0x4000
+#define TRUN11			0x8000
+
+#define TIMIL0_P		0x00
+#define TIMIL1_P		0x01
+#define TIMIL2_P		0x02
+#define TIMIL3_P		0x03
+#define TIMIL4_P		0x10
+#define TIMIL5_P		0x11
+#define TIMIL6_P		0x12
+#define TIMIL7_P		0x13
+#define TIMIL8_P		0x00
+#define TIMIL9_P		0x01
+#define TIMIL10_P		0x02
+#define TIMIL11_P		0x03
+#define TOVL_ERR0_P		0x04
+#define TOVL_ERR1_P		0x05
+#define TOVL_ERR2_P		0x06
+#define TOVL_ERR3_P		0x07
+#define TOVL_ERR4_P		0x14
+#define TOVL_ERR5_P		0x15
+#define TOVL_ERR6_P		0x16
+#define TOVL_ERR7_P		0x17
+#define TOVL_ERR8_P		0x04
+#define TOVL_ERR9_P		0x05
+#define TOVL_ERR10_P		0x06
+#define TOVL_ERR11_P		0x07
+#define TRUN0_P			0x0C
+#define TRUN1_P			0x0D
+#define TRUN2_P			0x0E
+#define TRUN3_P			0x0F
+#define TRUN4_P			0x1C
+#define TRUN5_P			0x1D
+#define TRUN6_P			0x1E
+#define TRUN7_P			0x1F
+#define TRUN8_P			0x0C
+#define TRUN9_P			0x0D
+#define TRUN10_P		0x0E
+#define TRUN11_P		0x0F
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT			0x0001
+#define WDTH_CAP		0x0002
+#define EXT_CLK			0x0003
+#define PULSE_HI		0x0004
+#define PERIOD_CNT		0x0008
+#define IRQ_ENA			0x0010
+#define TIN_SEL			0x0020
+#define OUT_DIS			0x0040
+#define CLK_SEL			0x0080
+#define TOGGLE_HI		0x0100
+#define EMU_RUN			0x0200
+#define ERR_TYP(x)		((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/*
+ * PROGRAMMABLE FLAG MASKS
+ */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
+#define PF0			0x0001
+#define PF1			0x0002
+#define PF2			0x0004
+#define PF3			0x0008
+#define PF4			0x0010
+#define PF5			0x0020
+#define PF6			0x0040
+#define PF7			0x0080
+#define PF8			0x0100
+#define PF9			0x0200
+#define PF10			0x0400
+#define PF11			0x0800
+#define PF12			0x1000
+#define PF13			0x2000
+#define PF14			0x4000
+#define PF15			0x8000
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
+#define PF0_P			0
+#define PF1_P			1
+#define PF2_P			2
+#define PF3_P			3
+#define PF4_P			4
+#define PF5_P			5
+#define PF6_P			6
+#define PF7_P			7
+#define PF8_P			8
+#define PF9_P			9
+#define PF10_P			10
+#define PF11_P			11
+#define PF12_P			12
+#define PF13_P			13
+#define PF14_P			14
+#define PF15_P			15
+
+/*
+ * SERIAL PERIPHERAL INTERFACE (SPI) MASKS
+ */
+
+/* SPI_CTL Masks */
+#define TIMOD		0x00000003	/* Transfer initiation mode and interrupt generation */
+#define SZ		0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
+#define GM		0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
+#define PSSE		0x00000010	/* Enable (=1) Slave-Select input for Master. */
+#define EMISO		0x00000020	/* Enable (=1) MISO pin as an output. */
+#define SIZE		0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
+#define LSBF		0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
+
+/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer.*/
+#define CPHA		0x00000400
+#define CPOL		0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
+#define MSTR		0x00001000	/* Configures SPI as master (=1) or slave (=0) */
+#define WOM		0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
+#define SPE		0x00004000	/* SPI module enable (=1), disable (=0) */
+
+/* SPI_FLG Masks */
+#define FLS1		0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2		0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3		0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4		0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5		0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6		0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7		0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1		0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2		0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3		0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4		0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5		0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6		0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7		0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P		0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P		0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P		0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P		0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P		0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P		0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P		0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P		0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2_P		0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P		0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4_P		0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5_P		0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6_P		0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7_P		0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF		0x00000001	/* Set (=1) when SPI single-word transfer complete */
+#define MODF		0x00000002	/* Set (=1) in a master device when some other device tries to become master */
+#define TXE		0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
+#define TXS		0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
+#define RBSY		0x00000010	/* Set (=1) when data is received with RDBR full */
+#define RXS		0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
+#define TXCOL		0x00000040	/* When set (=1), corrupt data may have been transmitted */
+
+/*
+ * ASYNCHRONOUS MEMORY CONTROLLER MASKS
+ */
+
+/* AMGCTL Masks */
+#define AMCKEN		0x0001		/* Enable CLKOUT */
+#define AMBEN_B0	0x0002		/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1	0x0004		/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Asynchronous Memory Banks 0,/ 1, and 2 */
+#define AMBEN_ALL	0x0008		/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+#define B0_PEN		0x0010		/* Enable 16-bit packing Bank 0 */
+#define B1_PEN		0x0020		/* Enable 16-bit packing Bank 1 */
+#define B2_PEN		0x0040		/* Enable 16-bit packing Bank 2 */
+#define B3_PEN		0x0080		/* Enable 16-bit packing Bank 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P	0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0	0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1	0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */
+#define AMBEN_P2	0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+#define B0_PEN_P	0x004		/* Enable 16-bit packing Bank 0 */
+#define B1_PEN_P	0x005		/* Enable 16-bit packing Bank 1 */
+#define B2_PEN_P	0x006		/* Enable 16-bit packing Bank 2 */
+#define B3_PEN_P	0x007		/* Enable 16-bit packing Bank 3 */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN		0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL	0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1		0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2		0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3		0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4		0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1		0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2		0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3		0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4		0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1		0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2		0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3		0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0		0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1		0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2		0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3		0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4		0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5		0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6		0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7		0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8		0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9		0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10	0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11	0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12	0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13	0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14	0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15	0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1		0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2		0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3		0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4		0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5		0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6		0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7		0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8		0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9		0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10	0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11	0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12	0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13	0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14	0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15	0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN		0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL	0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1		0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2		0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3		0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4		0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1		0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2		0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3		0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4		0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1		0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2		0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3		0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0		0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1		0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2		0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3		0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4		0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5		0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6		0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7		0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8		0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9		0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10	0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11	0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12	0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13	0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14	0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15	0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1		0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2		0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3		0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4		0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5		0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6		0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7		0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8		0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9		0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10	0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11	0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12	0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13	0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14	0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15	0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN		0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL	0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1		0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2		0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3		0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4		0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1		0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2		0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3		0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4		0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1		0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2		0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3		0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0		0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1		0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2		0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3		0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4		0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5		0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6		0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7		0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8		0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9		0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10	0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11	0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12	0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13	0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14	0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15	0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1		0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2		0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3		0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4		0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5		0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6		0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7		0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8		0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9		0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10	0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11	0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12	0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13	0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14	0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15	0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN		0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL	0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1		0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2		0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3		0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4		0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1		0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2		0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3		0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4		0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1		0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2		0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3		0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0		0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1		0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2		0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3		0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4		0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5		0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6		0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7		0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8		0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9		0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10	0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11	0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12	0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13	0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14	0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15	0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1		0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2		0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3		0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4		0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5		0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6		0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7		0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8		0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9		0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10	0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11	0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12	0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13	0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14	0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15	0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/*
+ * SDRAM CONTROLLER MASKS
+ */
+
+/* EBIU_SDGCTL Masks */
+#define SCTLE		0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2		0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3		0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE		0x00000010	/* Enable SDRAM prefetch */
+#define PFP		0x00000020	/* Prefetch has priority over AMC requests */
+#define TRAS_1		0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2		0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3		0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4		0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5		0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6		0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7		0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8		0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9		0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10		0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11		0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12		0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13		0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14		0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15		0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1		0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2		0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3		0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4		0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5		0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6		0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7		0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1		0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2		0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3		0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4		0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5		0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6		0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7		0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1		0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2		0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3		0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD		0x00200000	/* Power-up start delay */
+#define PSM		0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS		0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS		0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE		0x02000000	/* Enable external buffering timing */
+#define FBBRW		0x04000000	/* Fast back-to-back read write enable */
+#define EMREN		0x10000000	/* Extended mode register enable */
+#define TCSR		0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG		0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EB0_E		0x00000001	/* Enable SDRAM external bank 0 */
+#define EB0_SZ_16	0x00000000	/* SDRAM external bank size = 16MB */
+#define EB0_SZ_32	0x00000002	/* SDRAM external bank size = 32MB */
+#define EB0_SZ_64	0x00000004	/* SDRAM external bank size = 64MB */
+#define EB0_SZ_128	0x00000006	/* SDRAM external bank size = 128MB */
+#define EB0_CAW_8	0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB0_CAW_9	0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_10	0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_11	0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+#define EB1_E		0x00000100	/* Enable SDRAM external bank 1 */
+#define EB1__SZ_16	0x00000000	/* SDRAM external bank size = 16MB */
+#define EB1__SZ_32	0x00000200	/* SDRAM external bank size = 32MB */
+#define EB1__SZ_64	0x00000400	/* SDRAM external bank size = 64MB */
+#define EB1__SZ_128	0x00000600	/* SDRAM external bank size = 128MB */
+#define EB1__CAW_8	0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB1__CAW_9	0x00001000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_10	0x00002000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_11	0x00003000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB2__E		0x00010000	/* Enable SDRAM external bank 2 */
+#define EB2__SZ_16	0x00000000	/* SDRAM external bank size = 16MB */
+#define EB2__SZ_32	0x00020000	/* SDRAM external bank size = 32MB */
+#define EB2__SZ_64	0x00040000	/* SDRAM external bank size = 64MB */
+#define EB2__SZ_128	0x00060000	/* SDRAM external bank size = 128MB */
+#define EB2__CAW_8	0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB2__CAW_9	0x00100000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_10	0x00200000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_11	0x00300000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB3__E		0x01000000	/* Enable SDRAM external bank 3 */
+#define EB3__SZ_16	0x00000000	/* SDRAM external bank size = 16MB */
+#define EB3__SZ_32	0x02000000	/* SDRAM external bank size = 32MB */
+#define EB3__SZ_64	0x04000000	/* SDRAM external bank size = 64MB */
+#define EB3__SZ_128	0x06000000	/* SDRAM external bank size = 128MB */
+#define EB3__CAW_8	0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB3__CAW_9	0x10000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_10	0x20000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_11	0x30000000	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI		0x00000001	/* SDRAM controller is idle */
+#define SDSRA		0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA		0x00000004	/* SDRAM power up active */
+#define SDRS		0x00000008	/* SDRAM is in reset state */
+#define SDEASE		0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT		0x00000020	/* Bus granted */
+
+#define COREMMR_BASE	0xFFE00000	/* Core MMRs */
+#define SYSMMR_BASE	0xFFC00000	/* System MMRs */
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define WDOG_CTL 	0xFFC00200	/* Watchdog Control register */
+#define WDOG_CNT 	0xFFC00204	/* Watchdog Count register */
+#define WDOG_STAT 	0xFFC00208	/* Watchdog Status register */
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define FIO_FLAG_D 	0xFFC00700	/* Flag Data register */
+#define FIO_FLAG_C 	0xFFC00704	/* Flag Clear register */
+#define FIO_FLAG_S 	0xFFC00708	/* Flag Set register */
+#define FIO_FLAG_T 	0xFFC0070C	/* Flag Toggle register */
+#define FIO_MASKA_D 	0xFFC00710	/* Flag Mask Interrupt A Data register */
+#define FIO_MASKA_C 	0xFFC00714	/* Flag Mask Interrupt A Clear register */
+#define FIO_MASKA_S 	0xFFC00718	/* Flag Mask Interrupt A Set register */
+#define FIO_MASKA_T 	0xFFC0071C	/* Flag Mask Interrupt A Toggle register */
+#define FIO_MASKB_D 	0xFFC00720	/* Flag Mask Interrupt B Data register */
+#define FIO_MASKB_C 	0xFFC00724	/* Flag Mask Interrupt B Clear register */
+#define FIO_MASKB_S 	0xFFC00728	/* Flag Mask Interrupt B Set register */
+#define FIO_MASKB_T 	0xFFC0072C	/* Flag Mask Interrupt B Toggle register */
+#define FIO_DIR 	0xFFC00730	/* Flag Direction  register */
+#define FIO_POLAR 	0xFFC00734	/* Flag Polarity register */
+#define FIO_EDGE 	0xFFC00738	/* Flag Interrupt Sensitivity register */
+#define FIO_BOTH 	0xFFC0073C	/* Flag Set on Both Edges register */
+#define FIO_INEN 	0xFFC00740	/* Flag Input Enable register */
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define PPI_CONTROL 	0xFFC01000	/* PPI0 Control register */
+#define PPI_STATUS 	0xFFC01004	/* PPI0 Status register */
+#define PPI_COUNT 	0xFFC01008	/* PPI0 Transfer Count register */
+#define PPI_DELAY 	0xFFC0100C	/* PPI0 Delay Count register */
+#define PPI_FRAME 	0xFFC01010	/* PPI0 Frame Length register */
+
+/*
+ * System Reset and Interrupt Controller registers for
+ * core A (0xFFC0 0100-0xFFC0 01FF)
+ */
+#define SWRST		0xFFC00100	/* Software Reset register */
+#define SYSCR		0xFFC00104	/* System Reset Configuration register */
+#define RVECT		0xFFC00108	/* SIC Reset Vector Address Register */
+#define SIC_SWRST	0xFFC00100	/* Software Reset register */
+#define SIC_SYSCR	0xFFC00104	/* System Reset Configuration register */
+#define SIC_RVECT	0xFFC00108	/* SIC Reset Vector Address Register */
+#define SIC_IMASK	0xFFC0010C	/* SIC Interrupt Mask register 0 - hack to fix old tests */
+#define SIC_IAR		0xFFC00124	/* SIC Interrupt Assignment Register 0 */
+#define SIC_IAR1	0xFFC00128	/* SIC Interrupt Assignment Register 1 */
+#define SIC_IAR2	0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
+#define SIC_ISR		0xFFC00114	/* SIC Interrupt Status register 0 */
+#define SIC_IWR		0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
+
+/* EBIU_SDBCTL Masks */
+#define EB_E		0x00000001	/* Enable SDRAM external bank 0 */
+#define EB_SZ_16	0x00000000	/* SDRAM external bank size = 16MB */
+#define EB_SZ_32	0x00000002	/* SDRAM external bank size = 32MB */
+#define EB_SZ_64	0x00000004	/* SDRAM external bank size = 64MB */
+#define EB_SZ_128	0x00000006	/* SDRAM external bank size = 128MB */
+#define EB_CAW_8	0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB_CAW_9	0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EB_CAW_10	0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EB_CAW_11	0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDBCTL Masks */
+#define EBE		0x00000001	/* Enable SDRAM external bank 0 */
+#define EBSZ_16		0x00000000	/* SDRAM external bank size = 16MB */
+#define EBSZ_32		0x00000002	/* SDRAM external bank size = 32MB */
+#define EBSZ_64		0x00000004	/* SDRAM external bank size = 64MB */
+#define EBSZ_128	0x00000006	/* SDRAM external bank size = 128MB */
+#define EBCAW_8		0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EBCAW_9		0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_10	0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_11	0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define MDMA_D0_CONFIG		0xFFC01F08	/* MemDMA1 Stream 0 Destination Configuration */
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC01F00	/* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA_D0_START_ADDR	0xFFC01F04	/* MemDMA1 Stream 0 Destination Start Address */
+#define MDMA_D0_X_COUNT		0xFFC01F10	/* MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA_D0_Y_COUNT		0xFFC01F18	/* MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA_D0_X_MODIFY	0xFFC01F14	/* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA_D0_Y_MODIFY	0xFFC01F1C	/* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC01F20	/* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA_D0_CURR_ADDR	0xFFC01F24	/* MemDMA1 Stream 0 Destination Current Address */
+#define MDMA_D0_CURR_X_COUNT	0xFFC01F30	/* MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC01F38	/* MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA_D0_IRQ_STATUS	0xFFC01F28	/* MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC01F2C	/* MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA_S0_CONFIG		0xFFC01F48	/* MemDMA1 Stream 0 Source Configuration */
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC01F40	/* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA_S0_START_ADDR	0xFFC01F44	/* MemDMA1 Stream 0 Source Start Address */
+#define MDMA_S0_X_COUNT		0xFFC01F50	/* MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA_S0_Y_COUNT		0xFFC01F58	/* MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA_S0_X_MODIFY	0xFFC01F54	/* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA_S0_Y_MODIFY	0xFFC01F5C	/* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC01F60	/* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA_S0_CURR_ADDR	0xFFC01F64	/* MemDMA1 Stream 0 Source Current Address */
+#define MDMA_S0_CURR_X_COUNT	0xFFC01F70	/* MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA_S0_CURR_Y_COUNT `	0xFFC01F78	/* MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA_S0_IRQ_STATUS	0xFFC01F68	/* MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC01F6C	/* MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA_D1_CONFIG		0xFFC01F88	/* MemDMA1 Stream 1 Destination Configuration */
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC01F80	/* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA_D1_START_ADDR	0xFFC01F84	/* MemDMA1 Stream 1 Destination Start Address */
+#define MDMA_D1_X_COUNT		0xFFC01F90	/* MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA_D1_Y_COUNT		0xFFC01F98	/* MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA_D1_X_MODIFY	0xFFC01F94	/* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA_D1_Y_MODIFY	0xFFC01F9C	/* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC01FA0	/* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA_D1_CURR_ADDR	0xFFC01FA4	/* MemDMA1 Stream 1 Dest Current Address */
+#define MDMA_D1_CURR_X_COUNT	0xFFC01FB0	/* MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC01FB8	/* MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA_D1_IRQ_STATUS	0xFFC01FA8	/* MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC01FAC	/* MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA_S1_CONFIG		0xFFC01FC8	/* MemDMA1 Stream 1 Source Configuration */
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC01FC0	/* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA_S1_START_ADDR	0xFFC01FC4	/* MemDMA1 Stream 1 Source Start Address */
+#define MDMA_S1_X_COUNT		0xFFC01FD0	/* MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA_S1_Y_COUNT		0xFFC01FD8	/* MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA_S1_X_MODIFY	0xFFC01FD4	/* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA_S1_Y_MODIFY	0xFFC01FDC	/* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC01FE0	/* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA_S1_CURR_ADDR	0xFFC01FE4	/* MemDMA1 Stream 1 Source Current Address */
+#define MDMA_S1_CURR_X_COUNT	0xFFC01FF0	/* MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC01FF8	/* MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA_S1_IRQ_STATUS	0xFFC01FE8	/* MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC01FEC	/* MemDMA1 Stream 1 Source Peripheral Map */
+
+#define DMA0_CONFIG		0xFFC01C08	/* DMA1 Channel 0 Configuration register */
+#define DMA0_NEXT_DESC_PTR	0xFFC01C00	/* DMA1 Channel 0 Next Descripter Ptr Reg */
+#define DMA0_START_ADDR		0xFFC01C04	/* DMA1 Channel 0 Start Address */
+#define DMA0_X_COUNT		0xFFC01C10	/* DMA1 Channel 0 Inner Loop Count */
+#define DMA0_Y_COUNT		0xFFC01C18	/* DMA1 Channel 0 Outer Loop Count */
+#define DMA0_X_MODIFY		0xFFC01C14	/* DMA1 Channel 0 Inner Loop Addr Increment */
+#define DMA0_Y_MODIFY		0xFFC01C1C	/* DMA1 Channel 0 Outer Loop Addr Increment */
+#define DMA0_CURR_DESC_PTR	0xFFC01C20	/* DMA1 Channel 0 Current Descriptor Pointer */
+#define DMA0_CURR_ADDR		0xFFC01C24	/* DMA1 Channel 0 Current Address Pointer */
+#define DMA0_CURR_X_COUNT	0xFFC01C30	/* DMA1 Channel 0 Current Inner Loop Count */
+#define DMA0_CURR_Y_COUNT	0xFFC01C38	/* DMA1 Channel 0 Current Outer Loop Count */
+#define DMA0_IRQ_STATUS		0xFFC01C28	/* DMA1 Channel 0 Interrupt Status Register */
+#define DMA0_PERIPHERAL_MAP	0xFFC01C2C	/* DMA1 Channel 0 Peripheral Map Register */
+
+#define DMA1_CONFIG		0xFFC00C08	/* DMA2 Channel 0 Configuration register */
+#define DMA1_NEXT_DESC_PTR	0xFFC00C00	/* DMA2 Channel 0 Next Descripter Ptr Reg */
+#define DMA1_START_ADDR		0xFFC00C04	/* DMA2 Channel 0 Start Address */
+#define DMA1_X_COUNT		0xFFC00C10	/* DMA2 Channel 0 Inner Loop Count */
+#define DMA1_Y_COUNT		0xFFC00C18	/* DMA2 Channel 0 Outer Loop Count */
+#define DMA1_X_MODIFY		0xFFC00C14	/* DMA2 Channel 0 Inner Loop Addr Increment */
+#define DMA1_Y_MODIFY		0xFFC00C1C	/* DMA2 Channel 0 Outer Loop Addr Increment */
+#define DMA1_CURR_DESC_PTR	0xFFC00C20	/* DMA2 Channel 0 Current Descriptor Pointer */
+#define DMA1_CURR_ADDR		0xFFC00C24	/* DMA2 Channel 0 Current Address Pointer */
+#define DMA1_CURR_X_COUNT	0xFFC00C30	/* DMA2 Channel 0 Current Inner Loop Count */
+#define DMA1_CURR_Y_COUNT	0xFFC00C38	/* DMA2 Channel 0 Current Outer Loop Count */
+#define DMA1_IRQ_STATUS		0xFFC00C28	/* DMA2 Channel 0 Interrupt /Status Register */
+#define DMA1_PERIPHERAL_MAP	0xFFC00C2C	/* DMA2 Channel 0 Peripheral Map Register */
+
+#define DMA2_CONFIG		0xFFC00C48	/* DMA2 Channel 1 Configuration register */
+#define DMA2_NEXT_DESC_PTR	0xFFC00C40	/* DMA2 Channel 1 Next Descripter Ptr Reg */
+#define DMA2_START_ADDR		0xFFC00C44	/* DMA2 Channel 1 Start Address */
+#define DMA2_X_COUNT		0xFFC00C50	/* DMA2 Channel 1 Inner Loop Count */
+#define DMA2_Y_COUNT		0xFFC00C58	/* DMA2 Channel 1 Outer Loop Count */
+#define DMA2_X_MODIFY		0xFFC00C54	/* DMA2 Channel 1 Inner Loop Addr Increment */
+#define DMA2_Y_MODIFY		0xFFC00C5C	/* DMA2 Channel 1 Outer Loop Addr Increment */
+#define DMA2_CURR_DESC_PTR	0xFFC00C60	/* DMA2 Channel 1 Current Descriptor Pointer */
+#define DMA2_CURR_ADDR		0xFFC00C64	/* DMA2 Channel 1 Current Address Pointer */
+#define DMA2_CURR_X_COUNT	0xFFC00C70	/* DMA2 Channel 1 Current Inner Loop Count */
+#define DMA2_CURR_Y_COUNT	0xFFC00C78	/* DMA2 Channel 1 Current Outer Loop Count */
+#define DMA2_IRQ_STATUS		0xFFC00C68	/* DMA2 Channel 1 Interrupt /Status Register */
+#define DMA2_PERIPHERAL_MAP	0xFFC00C6C	/* DMA2 Channel 1 Peripheral Map Register */
+
+#define DMA3_CONFIG		0xFFC00C88	/* DMA2 Channel 2 Configuration register */
+#define DMA3_NEXT_DESC_PTR	0xFFC00C80	/* DMA2 Channel 2 Next Descripter Ptr Reg */
+#define DMA3_START_ADDR		0xFFC00C84	/* DMA2 Channel 2 Start Address */
+#define DMA3_X_COUNT		0xFFC00C90	/* DMA2 Channel 2 Inner Loop Count */
+#define DMA3_Y_COUNT		0xFFC00C98	/* DMA2 Channel 2 Outer Loop Count */
+#define DMA3_X_MODIFY		0xFFC00C94	/* DMA2 Channel 2 Inner Loop Addr Increment */
+#define DMA3_Y_MODIFY		0xFFC00C9C	/* DMA2 Channel 2 Outer Loop Addr Increment */
+#define DMA3_CURR_DESC_PTR	0xFFC00CA0	/* DMA2 Channel 2 Current Descriptor Pointer */
+#define DMA3_CURR_ADDR		0xFFC00CA4	/* DMA2 Channel 2 Current Address Pointer */
+#define DMA3_CURR_X_COUNT	0xFFC00CB0	/* DMA2 Channel 2 Current Inner Loop Count */
+#define DMA3_CURR_Y_COUNT	0xFFC00CB8	/* DMA2 Channel 2 Current Outer Loop Count */
+#define DMA3_IRQ_STATUS		0xFFC00CA8	/* DMA2 Channel 2 Interrupt /Status Register */
+#define DMA3_PERIPHERAL_MAP	0xFFC00CAC	/* DMA2 Channel 2 Peripheral Map Register */
+
+#define DMA4_CONFIG		0xFFC00CC8	/* DMA2 Channel 3 Configuration register */
+#define DMA4_NEXT_DESC_PTR	0xFFC00CC0	/* DMA2 Channel 3 Next Descripter Ptr Reg */
+#define DMA4_START_ADDR		0xFFC00CC4	/* DMA2 Channel 3 Start Address */
+#define DMA4_X_COUNT		0xFFC00CD0	/* DMA2 Channel 3 Inner Loop Count */
+#define DMA4_Y_COUNT		0xFFC00CD8	/* DMA2 Channel 3 Outer Loop Count */
+#define DMA4_X_MODIFY		0xFFC00CD4	/* DMA2 Channel 3 Inner Loop Addr Increment */
+#define DMA4_Y_MODIFY		0xFFC00CDC	/* DMA2 Channel 3 Outer Loop Addr Increment */
+#define DMA4_CURR_DESC_PTR	0xFFC00CE0	/* DMA2 Channel 3 Current Descriptor Pointer */
+#define DMA4_CURR_ADDR		0xFFC00CE4	/* DMA2 Channel 3 Current Address Pointer */
+#define DMA4_CURR_X_COUNT	0xFFC00CF0	/* DMA2 Channel 3 Current Inner Loop Count */
+#define DMA4_CURR_Y_COUNT	0xFFC00CF8	/* DMA2 Channel 3 Current Outer Loop Count */
+#define DMA4_IRQ_STATUS		0xFFC00CE8	/* DMA2 Channel 3 Interrupt /Status Register */
+#define DMA4_PERIPHERAL_MAP	0xFFC00CEC	/* DMA2 Channel 3 Peripheral Map Register */
+
+#define DMA5_CONFIG		0xFFC00D08	/* DMA2 Channel 4 Configuration register */
+#define DMA5_NEXT_DESC_PTR	0xFFC00D00	/* DMA2 Channel 4 Next Descripter Ptr Reg */
+#define DMA5_START_ADDR		0xFFC00D04	/* DMA2 Channel 4 Start Address */
+#define DMA5_X_COUNT		0xFFC00D10	/* DMA2 Channel 4 Inner Loop Count */
+#define DMA5_Y_COUNT		0xFFC00D18	/* DMA2 Channel 4 Outer Loop Count */
+#define DMA5_X_MODIFY		0xFFC00D14	/* DMA2 Channel 4 Inner Loop Addr Increment */
+#define DMA5_Y_MODIFY		0xFFC00D1C	/* DMA2 Channel 4 Outer Loop Addr Increment */
+#define DMA5_CURR_DESC_PTR	0xFFC00D20	/* DMA2 Channel 4 Current Descriptor Pointer */
+#define DMA5_CURR_ADDR		0xFFC00D24	/* DMA2 Channel 4 Current Address Pointer */
+#define DMA5_CURR_X_COUNT	0xFFC00D30	/* DMA2 Channel 4 Current Inner Loop Count */
+#define DMA5_CURR_Y_COUNT	0xFFC00D38	/* DMA2 Channel 4 Current Outer Loop Count */
+#define DMA5_IRQ_STATUS		0xFFC00D28	/* DMA2 Channel 4 Interrupt /Status Register */
+#define DMA5_PERIPHERAL_MAP	0xFFC00D2C	/* DMA2 Channel 4 Peripheral Map Register */
+
+#define DMA6_CONFIG		0xFFC00D48	/* DMA2 Channel 5 Configuration register */
+#define DMA6_NEXT_DESC_PTR	0xFFC00D40	/* DMA2 Channel 5 Next Descripter Ptr Reg */
+#define DMA6_START_ADDR		0xFFC00D44	/* DMA2 Channel 5 Start Address */
+#define DMA6_X_COUNT		0xFFC00D50	/* DMA2 Channel 5 Inner Loop Count */
+#define DMA6_Y_COUNT		0xFFC00D58	/* DMA2 Channel 5 Outer Loop Count */
+#define DMA6_X_MODIFY		0xFFC00D54	/* DMA2 Channel 5 Inner Loop Addr Increment */
+#define DMA6_Y_MODIFY		0xFFC00D5C	/* DMA2 Channel 5 Outer Loop Addr Increment */
+#define DMA6_CURR_DESC_PTR	0xFFC00D60	/* DMA2 Channel 5 Current Descriptor Pointer */
+#define DMA6_CURR_ADDR		0xFFC00D64	/* DMA2 Channel 5 Current Address Pointer */
+#define DMA6_CURR_X_COUNT	0xFFC00D70	/* DMA2 Channel 5 Current Inner Loop Count */
+#define DMA6_CURR_Y_COUNT	0xFFC00D78	/* DMA2 Channel 5 Current Outer Loop Count */
+#define DMA6_IRQ_STATUS		0xFFC00D68	/* DMA2 Channel 5 Interrupt /Status Register */
+#define DMA6_PERIPHERAL_MAP	0xFFC00D6C	/* DMA2 Channel 5 Peripheral Map Register */
+
+#define DMA7_CONFIG		0xFFC00D88	/* DMA2 Channel 6 Configuration register */
+#define DMA7_NEXT_DESC_PTR	0xFFC00D80	/* DMA2 Channel 6 Next Descripter Ptr Reg */
+#define DMA7_START_ADDR		0xFFC00D84	/* DMA2 Channel 6 Start Address */
+#define DMA7_X_COUNT		0xFFC00D90	/* DMA2 Channel 6 Inner Loop Count */
+#define DMA7_Y_COUNT		0xFFC00D98	/* DMA2 Channel 6 Outer Loop Count */
+#define DMA7_X_MODIFY		0xFFC00D94	/* DMA2 Channel 6 Inner Loop Addr Increment */
+#define DMA7_Y_MODIFY		0xFFC00D9C	/* DMA2 Channel 6 Outer Loop Addr Increment */
+#define DMA7_CURR_DESC_PTR	0xFFC00DA0	/* DMA2 Channel 6 Current Descriptor Pointer */
+#define DMA7_CURR_ADDR		0xFFC00DA4	/* DMA2 Channel 6 Current Address Pointer */
+#define DMA7_CURR_X_COUNT	0xFFC00DB0	/* DMA2 Channel 6 Current Inner Loop Count */
+#define DMA7_CURR_Y_COUNT	0xFFC00DB8	/* DMA2 Channel 6 Current Outer Loop Count */
+#define DMA7_IRQ_STATUS		0xFFC00DA8	/* DMA2 Channel 6 Interrupt /Status Register */
+#define DMA7_PERIPHERAL_MAP	0xFFC00DAC	/* DMA2 Channel 6 Peripheral Map Register */
+
+#define TIMER_ENABLE 		0xFFC00680	/* Timer Enable Register */
+#define TIMER_DISABLE 		0xFFC00684	/* Timer Disable register */
+#define TIMER_STATUS 		0xFFC00688	/* Timer Status register */
+
+/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
+#define WDSIZE8			0x00000000	/* Word Size 8 bits */
+#define WDSIZE16		0x00000004	/* Word Size 16 bits */
+#define WDSIZE32		0x00000008	/* Word Size 32 bits */
+
+#endif				/* _DEF_BF561_H */
diff --git a/include/asm-blackfin/arch-bf561/defBF561_extn.h b/include/asm-blackfin/arch-bf561/defBF561_extn.h
new file mode 100644
index 0000000..b309b74
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/defBF561_extn.h
@@ -0,0 +1,76 @@
+/*
+ * defBF561_extn.h
+ *
+ * This file is subject to the terms and conditions of the GNU Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Non-GPL License also available as part of VisualDSP++
+ *
+ * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
+ *
+ * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
+ *
+ * This file under source code control, please send bugs or changes to:
+ * dsptools.support@analog.com
+ *
+ */
+
+#ifndef _DEF_BF561_EXTN_H
+#define _DEF_BF561_EXTN_H
+
+#define OFFSET_( x )		((x) & 0x0000FFFF) /* define macro for offset */
+/* Delay inserted for PLL transition */
+#define PLL_DELAY		0x1000
+
+#define L1_ISRAM		0xFFA00000
+#define L1_ISRAM_END		0xFFA10000
+#define DATA_BANKA_SRAM		0xFF800000
+#define DATA_BANKA_SRAM_END	0xFF808000
+#define DATA_BANKB_SRAM		0xFF900000
+#define DATA_BANKB_SRAM_END	0xFF908000
+#define SYSMMR_BASE		0xFFC00000
+#define WDSIZE16		0x00000004
+
+/* Event Vector Table Address */
+#define EVT_EMULATION_ADDR	0xffe02000
+#define EVT_RESET_ADDR		0xffe02004
+#define EVT_NMI_ADDR		0xffe02008
+#define EVT_EXCEPTION_ADDR	0xffe0200c
+#define EVT_GLOBAL_INT_ENB_ADDR	0xffe02010
+#define EVT_HARDWARE_ERROR_ADDR	0xffe02014
+#define EVT_TIMER_ADDR		0xffe02018
+#define EVT_IVG7_ADDR		0xffe0201c
+#define EVT_IVG8_ADDR		0xffe02020
+#define EVT_IVG9_ADDR		0xffe02024
+#define EVT_IVG10_ADDR		0xffe02028
+#define EVT_IVG11_ADDR		0xffe0202c
+#define EVT_IVG12_ADDR		0xffe02030
+#define EVT_IVG13_ADDR		0xffe02034
+#define EVT_IVG14_ADDR		0xffe02038
+#define EVT_IVG15_ADDR		0xffe0203c
+#define EVT_OVERRIDE_ADDR	0xffe02100
+
+/* IMASK Bit values */
+#define IVG15_POS		0x00008000
+#define IVG14_POS		0x00004000
+#define IVG13_POS		0x00002000
+#define IVG12_POS		0x00001000
+#define IVG11_POS		0x00000800
+#define IVG10_POS		0x00000400
+#define IVG9_POS		0x00000200
+#define IVG8_POS		0x00000100
+#define IVG7_POS		0x00000080
+#define IVGTMR_POS		0x00000040
+#define IVGHW_POS		0x00000020
+
+#define WDOG_TMR_DISABLE	(0xAD << 4)
+#define ICTL_RST		0x00000000
+#define ICTL_NMI		0x00000002
+#define ICTL_GP			0x00000004
+#define ICTL_DISABLE		0x00000003
+
+/* Watch Dog timer values setup */
+#define WATCHDOG_DISABLE	WDOG_TMR_DISABLE | ICTL_DISABLE
+
+#endif	/* _DEF_BF561_EXTN_H */
diff --git a/include/asm-blackfin/arch-bf561/irq.h b/include/asm-blackfin/arch-bf561/irq.h
new file mode 100644
index 0000000..2f7dd99
--- /dev/null
+++ b/include/asm-blackfin/arch-bf561/irq.h
@@ -0,0 +1,137 @@
+/*
+ * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed by HuTao Apr18, 2003
+ *
+ * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
+ *
+ * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
+ * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
+ * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ *
+ * Adapted for BlackFin BF533 by Bas Vermeulen <bas@buyways.nl>
+ * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl)
+ * Copyright (c) 2004 LG Soft India.
+ * Copyright (c) 2004 HHTech.
+ *
+ * Adapted for BlackFin BF561 by Bas Vermeulen <bas@buyways.nl>
+ * Copyright (c) 2005 BuyWays B.V. (www.buyways.nl)
+ */
+
+#ifndef _BF561_IRQ_H_
+#define _BF561_IRQ_H_
+
+/*
+ * Interrupt source definitions:
+ *	Event Source		Core Event Name	    IRQ No
+ *	Emulation Events		EMU		0
+ *	Reset				RST		1
+ *	NMI				NMI		2
+ *	Exception			EVX		3
+ *	Reserved			--		4
+ *	Hardware Error			IVHW		5
+ *	Core Timer			IVTMR		6
+ *
+ *	PLL Wakeup Interrupt		IVG7		7
+ *	DMA1 Error (generic)		IVG7		8
+ *	DMA2 Error (generic)		IVG7		9
+ *	IMDMA Error (generic)		IVG7		10
+ *	PPI1 Error Interrupt		IVG7		11
+ *	PPI2 Error Interrupt		IVG7		12
+ *	SPORT0 Error Interrupt		IVG7		13
+ *	SPORT1 Error Interrupt		IVG7		14
+ *	SPI Error Interrupt		IVG7		15
+ *	UART Error Interrupt		IVG7		16
+ *	Reserved Interrupt		IVG7		17
+ *
+ *	DMA1 0  Interrupt(PPI1)		IVG8		18
+ *	DMA1 1  Interrupt(PPI2)		IVG8		19
+ *	DMA1 2  Interrupt		IVG8		20
+ *	DMA1 3  Interrupt		IVG8		21
+ *	DMA1 4  Interrupt		IVG8		22
+ *	DMA1 5  Interrupt		IVG8		23
+ *	DMA1 6  Interrupt		IVG8		24
+ *	DMA1 7  Interrupt		IVG8		25
+ *	DMA1 8  Interrupt		IVG8		26
+ *	DMA1 9  Interrupt		IVG8		27
+ *	DMA1 10 Interrupt		IVG8		28
+ *	DMA1 11 Interrupt		IVG8		29
+ *
+ *	DMA2 0  (SPORT0 RX)		IVG9		30
+ *	DMA2 1  (SPORT0 TX)		IVG9		31
+ *	DMA2 2  (SPORT1 RX)		IVG9		32
+ *	DMA2 3  (SPORT2 TX)		IVG9		33
+ *	DMA2 4  (SPI)			IVG9		34
+ *	DMA2 5  (UART RX)		IVG9		35
+ *	DMA2 6  (UART TX)		IVG9		36
+ *	DMA2 7  Interrupt		IVG9		37
+ *	DMA2 8  Interrupt		IVG9		38
+ *	DMA2 9  Interrupt		IVG9		39
+ *	DMA2 10 Interrupt		IVG9		40
+ *	DMA2 11 Interrupt		IVG9		41
+ *
+ *	TIMER 0  Interrupt		IVG10		42
+ *	TIMER 1  Interrupt		IVG10		43
+ *	TIMER 2  Interrupt		IVG10		44
+ *	TIMER 3  Interrupt		IVG10		45
+ *	TIMER 4  Interrupt		IVG10		46
+ *	TIMER 5  Interrupt		IVG10		47
+ *	TIMER 6  Interrupt		IVG10		48
+ *	TIMER 7  Interrupt		IVG10		49
+ *	TIMER 8  Interrupt		IVG10		50
+ *	TIMER 9  Interrupt		IVG10		51
+ *	TIMER 10 Interrupt		IVG10		52
+ *	TIMER 11 Interrupt		IVG10		53
+ *
+ *	Programmable Flags0 A (8)	IVG11		54
+ *	Programmable Flags0 B (8)	IVG11		55
+ *	Programmable Flags1 A (8)	IVG11		56
+ *	Programmable Flags1 B (8)	IVG11		57
+ *	Programmable Flags2 A (8)	IVG11		58
+ *	Programmable Flags2 B (8)	IVG11		59
+ *
+ *	MDMA1 0 write/read INT		IVG8		60
+ *	MDMA1 1 write/read INT		IVG8		61
+ *
+ *	MDMA2 0 write/read INT		IVG9		62
+ *	MDMA2 1 write/read INT		IVG9		63
+ *
+ *	IMDMA 0 write/read INT		IVG12		64
+ *	IMDMA 1 write/read INT		IVG12		65
+ *
+ *	Watch Dog Timer			IVG13		66
+ *
+ *	Reserved interrupt		IVG7		67
+ *	Reserved interrupt		IVG7		68
+ *	Supplemental interrupt 0	IVG7		69
+ *	supplemental interrupt 1	IVG7		70
+ *
+ *	Software Interrupt 1		IVG14		71
+ *	Software Interrupt 2		IVG15		72
+ */
+
+/*
+ * The ABSTRACT IRQ definitions
+ *  the first seven of the following are fixed,
+ *  the rest you change if you need to.
+ */
+/* IVG 0-6 */
+#define	IRQ_EMU			0	/* Emulation */
+#define	IRQ_RST			1	/* Reset */
+#define	IRQ_NMI			2	/* Non Maskable Interrupt */
+#define	IRQ_EVX			3	/* Exception */
+#define	IRQ_UNUSED		4	/* Reserved interrupt */
+#define	IRQ_HWERR		5	/* Hardware Error */
+#define	IRQ_CORETMR		6	/* Core timer */
+
+#define	IRQ_UART_RX_BIT		0x10000000
+#define	IRQ_UART_TX_BIT		0x20000000
+#define	IRQ_UART_ERROR_BIT	0x200
+
+#endif				/* _BF561_IRQ_H_ */
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
new file mode 100644
index 0000000..8d826fa
--- /dev/null
+++ b/include/configs/bf561-ezkit.h
@@ -0,0 +1,244 @@
+/*
+ * U-boot - Configuration file for BF561 EZKIT board
+ */
+
+#ifndef __CONFIG_EZKIT561_H__
+#define __CONFIG_EZKIT561_H__
+
+#define CONFIG_VDSP		1
+#define CONFIG_BF561		1
+
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_BAUDRATE		57600
+/* Set default serial console for bf537 */
+#define CONFIG_UART_CONSOLE	0
+#define CONFIG_EZKIT561		1
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_PANIC_HANG 1
+
+/*
+* Boot Mode Set
+* Blackfin can support several boot modes
+*/
+#define BF561_BYPASS_BOOT	0x21
+#define BF561_PARA_BOOT		0x22
+#define BF561_SPI_BOOT		0x24
+/* Define the boot mode */
+#define BFIN_BOOT_MODE	BF561_BYPASS_BOOT
+
+/* This sets the default state of the cache on U-Boot's boot */
+#define CONFIG_ICACHE_ON
+#define CONFIG_DCACHE_ON
+
+/* Define where the uboot will be loaded by on-chip boot rom */
+#define APP_ENTRY 0x00001000
+
+/*
+ * Stringize definitions - needed for environmental settings
+ */
+#define STRINGIZE2(x) #x
+#define STRINGIZE(x) STRINGIZE2(x)
+
+/*
+ * Board settings
+ */
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x2C010300
+#define CONFIG_ASYNC_EBIU_BASE	CONFIG_SMC91111_BASE & ~(4*1024*1024)
+#define CONFIG_SMC_USE_32_BIT	1
+#define CONFIG_MISC_INIT_R	1
+
+/*
+ * Clock settings
+ */
+
+/* CONFIG_CLKIN_HZ is any value in Hz				*/
+#define CONFIG_CLKIN_HZ		30000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
+/*						    1=CLKIN/2	*/
+#define CONFIG_CLKIN_HALF	0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
+/*						 1=bypass PLL	*/
+#define CONFIG_PLL_BYPASS	0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is	*/
+/* Values can range from 1-64					*/
+#define CONFIG_VCO_MULT		20
+/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
+/* Values can be 1, 2, 4, or 8 ONLY				*/
+#define CONFIG_CCLK_DIV		1
+/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
+/* Values can range from 1-15					*/
+#define CONFIG_SCLK_DIV		5
+/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
+/* Values can range from 2-65535				*/
+/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
+#define CONFIG_SPI_BAUD		2
+#define CONFIG_SPI_BAUD_INITBLOCK	4
+
+/*
+ * Network settings
+ */
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		ezkit561
+#define CONFIG_ROOTPATH		/arm-cross-build/BF561/uClinux-dist/romfs
+#endif				/* CONFIG_DRIVER_SMC91111 */
+
+/*
+ * Flash settings
+ */
+
+#define CFG_FLASH_CFI		/* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER	/* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_FLASH_BASE		0x20000000
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
+#define CFG_ENV_ADDR		0x20020000
+#define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+/* JFFS Partition offset set  */
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
+/* 512k reserved for u-boot */
+#define CFG_JFFS2_FIRST_SECTOR	8
+
+/*
+ * SDRAM settings & memory map
+ */
+
+#define CONFIG_MEM_SIZE			64	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH		9	/* 8, 9, 10, 11    */
+#define CONFIG_MEM_MT48LC16M16A2TG_75	1
+
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
+
+#define CFG_MEMTEST_START	0x0	/* memtest works on */
+#define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
+
+#define	CONFIG_LOADADDR		0x01000000	/* default load address */
+#define CFG_LOAD_ADDR		CONFIG_LOADADDR
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
+
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+
+#define CFG_GBL_DATA_SIZE	0x4000
+#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+
+#if ( CONFIG_CLKIN_HALF == 0 )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#else
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#endif
+
+#if (CONFIG_PLL_BYPASS == 0)
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#else
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
+#endif
+
+/*
+ * Command settings
+ */
+
+#define CFG_AUTOLOAD	"no"	/* rarpb, bootp, dhcp commands will	*/
+				/* only perform a configuration		*/
+				/* lookup from the BOOTP/DHCP server	*/
+				/* but not try to load any image	*/
+				/* using TFTP				*/
+#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, */
+					/* currently its disabled */
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
+
+#if (CONFIG_DRIVER_SMC91111)
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_CACHE	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_DHCP)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" 		\
+	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):"	\
+		"$(rootpath) console=ttyBF0,57600\0"						\
+	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):"	\
+		"$(gatewayip):$(netmask):$(hostname):eth0:off\0"	\
+	"ramboot=tftpboot $(loadaddr) linux; "		\
+		"run ramargs; run addip; bootelf\0"			\
+	"nfsboot=tftpboot $(loadaddr) linux; "		\
+		"run nfsargs; run addip; bootelf\0"			\
+	"update=tftpboot $(loadaddr) u-boot.bin; "	\
+		"protect off 0x20000000 0x2003FFFF; "			\
+		"erase 0x20000000 0x2003FFFF; "				\
+		"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
+	""
+#else
+#define CONFIG_COMMANDS1	(CONFIG_CMD_DFL	| \
+				 CFG_CMD_ELF	| \
+				 CFG_CMD_CACHE	| \
+				 CFG_CMD_JFFS2)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"		\
+	"flashboot=bootm 0x20100000\0"					\
+	""
+#endif
+
+#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Console settings
+ */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#endif
+#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CONFIG_LOADS_ECHO	1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_HZ			1000		/* decrementer freq: 10 ms ticks */
+#define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+
+/*
+ * FLASH organization and environment definitions
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define AMGCTLVAL		0x3F
+#define AMBCTL0VAL		0x7BB07BB0
+#define AMBCTL1VAL		0xFFC27BB0
+
+#ifdef CONFIG_VDSP
+#define ET_EXEC_VDSP		0x8
+#define SHT_STRTAB_VDSP		0x1
+#define ELFSHDRSIZE_VDSP	0x2C
+#define VDSP_ENTRY_ADDR		0xFFA00000
+#endif
+
+#endif				/* __CONFIG_EZKIT561_H__ */