arm: mvebu: axp: Set CONFIG_SYS_TCLK globally
This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.
Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove
useless default CONFIG_SYS_TCLK value from the end of soc.h file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index e29c0f3..8e8a405 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -208,10 +208,7 @@
#define BOOT_FROM_UART 0x2
#define BOOT_FROM_SPI 0x3
-#endif
-/* TCLK Core Clock definition */
-#ifndef CONFIG_SYS_TCLK
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
#endif
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index b3c4079..dd0c3cb 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -16,7 +16,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C_LEGACY
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 4475de2..5d40128 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -18,7 +18,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C_LEGACY
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index c456921..fc23932 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -15,7 +15,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/* I2C */
#define CONFIG_SYS_I2C_LEGACY
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index c6a2cfe..760713d 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -15,7 +15,6 @@
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
/*
* The debugging version enables USB support via defconfig.