stm32: stm32f7: add spl build support
This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.
Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
- spl U-Boot : 0x0800_0000
- standard U-Boot : 0x0800_8000
To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index ec6b3ff..a3390d0 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -8,6 +8,23 @@
config STM32F7
bool "stm32f7 family"
+ select SUPPORT_SPL
+ select SPL
+ select SPL_CLK
+ select SPL_DM
+ select SPL_DM_SEQ_ALIAS
+ select SPL_DRIVERS_MISC_SUPPORT
+ select SPL_GPIO_SUPPORT
+ select SPL_LIBCOMMON_SUPPORT
+ select SPL_LIBGENERIC_SUPPORT
+ select SPL_MTD_SUPPORT
+ select SPL_OF_CONTROL
+ select SPL_OF_LIBFDT
+ select SPL_OF_TRANSLATE
+ select SPL_PINCTRL
+ select SPL_RAM
+ select SPL_SERIAL_SUPPORT
+ select SPL_SYS_MALLOC_SIMPLE
source "arch/arm/mach-stm32/stm32f4/Kconfig"
source "arch/arm/mach-stm32/stm32f1/Kconfig"
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index 7a6d93c..87fa5eb 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <dm.h>
#include <ram.h>
+#include <spl.h>
#include <asm/io.h>
#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
@@ -36,16 +37,18 @@
}
int dram_init(void)
{
- struct udevice *dev;
int rv;
fdt_addr_t mr_base, mr_size;
+#ifndef CONFIG_SUPPORT_SPL
+ struct udevice *dev;
rv = uclass_get_device(UCLASS_RAM, 0, &dev);
if (rv) {
debug("DRAM init failed: %d\n", rv);
return rv;
}
+#endif
rv = get_memory_base_size(&mr_base, &mr_size);
if (rv)
return rv;
@@ -87,6 +90,28 @@
}
#endif
+#ifdef CONFIG_SPL_BUILD
+int spl_dram_init(void)
+{
+ struct udevice *dev;
+ int rv;
+ rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (rv)
+ debug("DRAM init failed: %d\n", rv);
+ return rv;
+}
+void spl_board_init(void)
+{
+ spl_dram_init();
+ preloader_console_init();
+ arch_cpu_init(); /* to configure mpu for sdram rw permissions */
+}
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NOR;
+}
+
+#endif
u32 get_board_rev(void)
{
return 0;
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
index a334d50..766b111 100644
--- a/configs/stm32f746-disco_defconfig
+++ b/configs/stm32f746-disco_defconfig
@@ -39,7 +39,6 @@
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_PINCTRL_STM32=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 150c68d..f948783 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -69,6 +69,7 @@
config SPL_PINCTRL_FULL
bool "Support full pin controllers in SPL"
depends on SPL_PINCTRL && SPL_OF_CONTROL
+ default n if TARGET_STM32F746_DISCO
default y
help
This option is an SPL-variant of the PINCTRL_FULL option.
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 1ee5815..055fdf8 100644
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -10,7 +10,12 @@
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
-#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_TEXT_BASE 0xC0000000
+#else
+#define CONFIG_SYS_TEXT_BASE CONFIG_SYS_FLASH_BASE
+#endif
/*
* Configuration of the external SDRAM memory
@@ -69,4 +74,19 @@
#define CONFIG_CMD_CACHE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DISPLAY_BOARDINFO
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_SPL_LEN 0x00008000
+#define CONFIG_SYS_UBOOT_START 0XC00003FD
+#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_SPL_LEN)
+#endif
+/* For SPL ends */
+
#endif /* __CONFIG_H */