ppc: Loose GOT access in IRQ
Using the GOT in IRQ handlers requires r14 to be -ffixed-r14.
Avoid this by relocatate transfer_to_handler too.
This will allow to free up r14 later on.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 85ea7a8..be980a1 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -217,28 +217,15 @@
mfspr r5,DSISR
stw r5,_DSISR(r21)
addi r3,r1,STACK_FRAME_OVERHEAD
- li r20,MSR_KERNEL
- rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
- lwz r6,GOT(transfer_to_handler)
- mtlr r6
- blrl
-.L_Alignment:
- .long AlignmentException - _start + EXC_OFF_SYS_RESET
- .long int_return - _start + EXC_OFF_SYS_RESET
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
/* Program check exception */
. = 0x700
ProgramCheck:
EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
- li r20,MSR_KERNEL
- rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
- lwz r6,GOT(transfer_to_handler)
- mtlr r6
- blrl
-.L_ProgramCheck:
- .long ProgramCheckException - _start + EXC_OFF_SYS_RESET
- .long int_return - _start + EXC_OFF_SYS_RESET
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
/* FPU on MPC5xx available. We will use it later.
*/
@@ -563,24 +550,6 @@
mtlr r4 /* restore link register */
blr
- /*
- * Function: relocate entries for one exception vector
- */
-trap_reloc:
- lwz r0, 0(r7) /* hdlr ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 0(r7)
-
- lwz r0, 4(r7) /* int_return ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 4(r7)
-
- sync
- isync
-
- blr
-
-
#if defined(CONFIG_PATI)
/* Program the PLL */
pll_prog_code_start: