mx6: ddr: Fix disabling on-die termination
In case rtt_nom is set to 0 keep ODT disabled (MMDC MPODTCTRL = 0).
No changes required for DDR MR1 Rtt_Nom impedance register, 0 value is
already handled correctly.
No board is currently affected by this change (rtt_nom != 0 on all i.MX6
ddr3 boards), this will be used by a follow-up change.
Fixes: fe0f7f7842e1 ("mx6: add mmdc configuration for MX6Q/MX6DL")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
index 73a637c..3c87c57 100644
--- a/arch/arm/mach-imx/mx6/ddr.c
+++ b/arch/arm/mach-imx/mx6/ddr.c
@@ -1469,8 +1469,17 @@
MMDC1(mprddqby3dl, 0x33333333);
}
- /* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
- val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+ /*
+ * MMDC Termination: rtt_nom:2 RZQ/2(120ohm),
+ * rtt_nom:1 RZQ/4(60ohm),
+ * rtt_nom:0 Disabled
+ */
+ if (sysinfo->rtt_nom == 0)
+ val = 0x00000000;
+ else if (sysinfo->rtt_nom == 2)
+ val = 0x00011117;
+ else
+ val = 0x00022227;
mmdc0->mpodtctrl = val;
if (sysinfo->dsize > 1)
MMDC1(mpodtctrl, val);