| /* |
| * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/crm_regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| |
| enum pll_clocks { |
| PLL_SYS, /* System PLL */ |
| PLL_BUS, /* System Bus PLL*/ |
| PLL_USBOTG, /* OTG USB PLL */ |
| PLL_ENET, /* ENET PLL */ |
| }; |
| |
| struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| |
| #ifdef CONFIG_MXC_OCOTP |
| void enable_ocotp_clk(unsigned char enable) |
| { |
| u32 reg; |
| |
| reg = __raw_readl(&imx_ccm->CCGR2); |
| if (enable) |
| reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK; |
| else |
| reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK; |
| __raw_writel(reg, &imx_ccm->CCGR2); |
| } |
| #endif |
| |
| void enable_usboh3_clk(unsigned char enable) |
| { |
| u32 reg; |
| |
| reg = __raw_readl(&imx_ccm->CCGR6); |
| if (enable) |
| reg |= MXC_CCM_CCGR6_USBOH3_MASK; |
| else |
| reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK); |
| __raw_writel(reg, &imx_ccm->CCGR6); |
| |
| } |
| |
| #ifdef CONFIG_I2C_MXC |
| /* i2c_num can be from 0 - 2 */ |
| int enable_i2c_clk(unsigned char enable, unsigned i2c_num) |
| { |
| u32 reg; |
| u32 mask; |
| |
| if (i2c_num > 2) |
| return -EINVAL; |
| |
| mask = MXC_CCM_CCGR_CG_MASK |
| << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1)); |
| reg = __raw_readl(&imx_ccm->CCGR2); |
| if (enable) |
| reg |= mask; |
| else |
| reg &= ~mask; |
| __raw_writel(reg, &imx_ccm->CCGR2); |
| return 0; |
| } |
| #endif |
| |
| static u32 decode_pll(enum pll_clocks pll, u32 infreq) |
| { |
| u32 div; |
| |
| switch (pll) { |
| case PLL_SYS: |
| div = __raw_readl(&imx_ccm->analog_pll_sys); |
| div &= BM_ANADIG_PLL_SYS_DIV_SELECT; |
| |
| return infreq * (div >> 1); |
| case PLL_BUS: |
| div = __raw_readl(&imx_ccm->analog_pll_528); |
| div &= BM_ANADIG_PLL_528_DIV_SELECT; |
| |
| return infreq * (20 + (div << 1)); |
| case PLL_USBOTG: |
| div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl); |
| div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT; |
| |
| return infreq * (20 + (div << 1)); |
| case PLL_ENET: |
| div = __raw_readl(&imx_ccm->analog_pll_enet); |
| div &= BM_ANADIG_PLL_ENET_DIV_SELECT; |
| |
| return (div == 3 ? 125000000 : 25000000 * (div << 1)); |
| default: |
| return 0; |
| } |
| /* NOTREACHED */ |
| } |
| static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) |
| { |
| u32 div; |
| u64 freq; |
| |
| switch (pll) { |
| case PLL_BUS: |
| if (pfd_num == 3) { |
| /* No PFD3 on PPL2 */ |
| return 0; |
| } |
| div = __raw_readl(&imx_ccm->analog_pfd_528); |
| freq = (u64)decode_pll(PLL_BUS, MXC_HCLK); |
| break; |
| case PLL_USBOTG: |
| div = __raw_readl(&imx_ccm->analog_pfd_480); |
| freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK); |
| break; |
| default: |
| /* No PFD on other PLL */ |
| return 0; |
| } |
| |
| return (freq * 18) / ((div & ANATOP_PFD_FRAC_MASK(pfd_num)) >> |
| ANATOP_PFD_FRAC_SHIFT(pfd_num)); |
| } |
| |
| static u32 get_mcu_main_clk(void) |
| { |
| u32 reg, freq; |
| |
| reg = __raw_readl(&imx_ccm->cacrr); |
| reg &= MXC_CCM_CACRR_ARM_PODF_MASK; |
| reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET; |
| freq = decode_pll(PLL_SYS, MXC_HCLK); |
| |
| return freq / (reg + 1); |
| } |
| |
| u32 get_periph_clk(void) |
| { |
| u32 reg, freq = 0; |
| |
| reg = __raw_readl(&imx_ccm->cbcdr); |
| if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { |
| reg = __raw_readl(&imx_ccm->cbcmr); |
| reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK; |
| reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET; |
| |
| switch (reg) { |
| case 0: |
| freq = decode_pll(PLL_USBOTG, MXC_HCLK); |
| break; |
| case 1: |
| case 2: |
| freq = MXC_HCLK; |
| break; |
| default: |
| break; |
| } |
| } else { |
| reg = __raw_readl(&imx_ccm->cbcmr); |
| reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK; |
| reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET; |
| |
| switch (reg) { |
| case 0: |
| freq = decode_pll(PLL_BUS, MXC_HCLK); |
| break; |
| case 1: |
| freq = mxc_get_pll_pfd(PLL_BUS, 2); |
| break; |
| case 2: |
| freq = mxc_get_pll_pfd(PLL_BUS, 0); |
| break; |
| case 3: |
| /* static / 2 divider */ |
| freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return freq; |
| } |
| |
| static u32 get_ipg_clk(void) |
| { |
| u32 reg, ipg_podf; |
| |
| reg = __raw_readl(&imx_ccm->cbcdr); |
| reg &= MXC_CCM_CBCDR_IPG_PODF_MASK; |
| ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET; |
| |
| return get_ahb_clk() / (ipg_podf + 1); |
| } |
| |
| static u32 get_ipg_per_clk(void) |
| { |
| u32 reg, perclk_podf; |
| |
| reg = __raw_readl(&imx_ccm->cscmr1); |
| perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK; |
| |
| return get_ipg_clk() / (perclk_podf + 1); |
| } |
| |
| static u32 get_uart_clk(void) |
| { |
| u32 reg, uart_podf; |
| u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ |
| reg = __raw_readl(&imx_ccm->cscdr1); |
| #ifdef CONFIG_MX6SL |
| if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) |
| freq = MXC_HCLK; |
| #endif |
| reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK; |
| uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; |
| |
| return freq / (uart_podf + 1); |
| } |
| |
| static u32 get_cspi_clk(void) |
| { |
| u32 reg, cspi_podf; |
| |
| reg = __raw_readl(&imx_ccm->cscdr2); |
| reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK; |
| cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; |
| |
| return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1)); |
| } |
| |
| static u32 get_axi_clk(void) |
| { |
| u32 root_freq, axi_podf; |
| u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); |
| |
| axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK; |
| axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET; |
| |
| if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) { |
| if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL) |
| root_freq = mxc_get_pll_pfd(PLL_BUS, 2); |
| else |
| root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1); |
| } else |
| root_freq = get_periph_clk(); |
| |
| return root_freq / (axi_podf + 1); |
| } |
| |
| static u32 get_emi_slow_clk(void) |
| { |
| u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0; |
| |
| cscmr1 = __raw_readl(&imx_ccm->cscmr1); |
| emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK; |
| emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET; |
| emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; |
| emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET; |
| |
| switch (emi_clk_sel) { |
| case 0: |
| root_freq = get_axi_clk(); |
| break; |
| case 1: |
| root_freq = decode_pll(PLL_USBOTG, MXC_HCLK); |
| break; |
| case 2: |
| root_freq = mxc_get_pll_pfd(PLL_BUS, 2); |
| break; |
| case 3: |
| root_freq = mxc_get_pll_pfd(PLL_BUS, 0); |
| break; |
| } |
| |
| return root_freq / (emi_slow_podf + 1); |
| } |
| |
| #ifdef CONFIG_MX6SL |
| static u32 get_mmdc_ch0_clk(void) |
| { |
| u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); |
| u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); |
| u32 freq, podf; |
| |
| podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \ |
| >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; |
| |
| switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >> |
| MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) { |
| case 0: |
| freq = decode_pll(PLL_BUS, MXC_HCLK); |
| break; |
| case 1: |
| freq = mxc_get_pll_pfd(PLL_BUS, 2); |
| break; |
| case 2: |
| freq = mxc_get_pll_pfd(PLL_BUS, 0); |
| break; |
| case 3: |
| /* static / 2 divider */ |
| freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2; |
| } |
| |
| return freq / (podf + 1); |
| |
| } |
| |
| int enable_fec_anatop_clock(void) |
| { |
| u32 reg = 0; |
| s32 timeout = 100000; |
| |
| struct anatop_regs __iomem *anatop = |
| (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; |
| |
| reg = readl(&anatop->pll_enet); |
| if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) || |
| (!(reg & BM_ANADIG_PLL_ENET_LOCK))) { |
| reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN; |
| writel(reg, &anatop->pll_enet); |
| while (timeout--) { |
| if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK) |
| break; |
| } |
| if (timeout < 0) |
| return -ETIMEDOUT; |
| } |
| |
| /* Enable FEC clock */ |
| reg |= BM_ANADIG_PLL_ENET_ENABLE; |
| reg &= ~BM_ANADIG_PLL_ENET_BYPASS; |
| writel(reg, &anatop->pll_enet); |
| |
| return 0; |
| } |
| |
| #else |
| static u32 get_mmdc_ch0_clk(void) |
| { |
| u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); |
| u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >> |
| MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET; |
| |
| return get_periph_clk() / (mmdc_ch0_podf + 1); |
| } |
| #endif |
| |
| static u32 get_usdhc_clk(u32 port) |
| { |
| u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0; |
| u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1); |
| u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1); |
| |
| switch (port) { |
| case 0: |
| usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >> |
| MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET; |
| clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL; |
| |
| break; |
| case 1: |
| usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >> |
| MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET; |
| clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL; |
| |
| break; |
| case 2: |
| usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >> |
| MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET; |
| clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL; |
| |
| break; |
| case 3: |
| usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >> |
| MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET; |
| clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL; |
| |
| break; |
| default: |
| break; |
| } |
| |
| if (clk_sel) |
| root_freq = mxc_get_pll_pfd(PLL_BUS, 0); |
| else |
| root_freq = mxc_get_pll_pfd(PLL_BUS, 2); |
| |
| return root_freq / (usdhc_podf + 1); |
| } |
| |
| u32 imx_get_uartclk(void) |
| { |
| return get_uart_clk(); |
| } |
| |
| u32 imx_get_fecclk(void) |
| { |
| return decode_pll(PLL_ENET, MXC_HCLK); |
| } |
| |
| int enable_sata_clock(void) |
| { |
| u32 reg = 0; |
| s32 timeout = 100000; |
| struct mxc_ccm_reg *const imx_ccm |
| = (struct mxc_ccm_reg *) CCM_BASE_ADDR; |
| |
| /* Enable sata clock */ |
| reg = readl(&imx_ccm->CCGR5); /* CCGR5 */ |
| reg |= MXC_CCM_CCGR5_SATA_MASK; |
| writel(reg, &imx_ccm->CCGR5); |
| |
| /* Enable PLLs */ |
| reg = readl(&imx_ccm->analog_pll_enet); |
| reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN; |
| writel(reg, &imx_ccm->analog_pll_enet); |
| reg |= BM_ANADIG_PLL_SYS_ENABLE; |
| while (timeout--) { |
| if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK) |
| break; |
| } |
| if (timeout <= 0) |
| return -EIO; |
| reg &= ~BM_ANADIG_PLL_SYS_BYPASS; |
| writel(reg, &imx_ccm->analog_pll_enet); |
| reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA; |
| writel(reg, &imx_ccm->analog_pll_enet); |
| |
| return 0 ; |
| } |
| |
| unsigned int mxc_get_clock(enum mxc_clock clk) |
| { |
| switch (clk) { |
| case MXC_ARM_CLK: |
| return get_mcu_main_clk(); |
| case MXC_PER_CLK: |
| return get_periph_clk(); |
| case MXC_AHB_CLK: |
| return get_ahb_clk(); |
| case MXC_IPG_CLK: |
| return get_ipg_clk(); |
| case MXC_IPG_PERCLK: |
| case MXC_I2C_CLK: |
| return get_ipg_per_clk(); |
| case MXC_UART_CLK: |
| return get_uart_clk(); |
| case MXC_CSPI_CLK: |
| return get_cspi_clk(); |
| case MXC_AXI_CLK: |
| return get_axi_clk(); |
| case MXC_EMI_SLOW_CLK: |
| return get_emi_slow_clk(); |
| case MXC_DDR_CLK: |
| return get_mmdc_ch0_clk(); |
| case MXC_ESDHC_CLK: |
| return get_usdhc_clk(0); |
| case MXC_ESDHC2_CLK: |
| return get_usdhc_clk(1); |
| case MXC_ESDHC3_CLK: |
| return get_usdhc_clk(2); |
| case MXC_ESDHC4_CLK: |
| return get_usdhc_clk(3); |
| case MXC_SATA_CLK: |
| return get_ahb_clk(); |
| default: |
| break; |
| } |
| |
| return -1; |
| } |
| |
| /* |
| * Dump some core clockes. |
| */ |
| int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| u32 freq; |
| freq = decode_pll(PLL_SYS, MXC_HCLK); |
| printf("PLL_SYS %8d MHz\n", freq / 1000000); |
| freq = decode_pll(PLL_BUS, MXC_HCLK); |
| printf("PLL_BUS %8d MHz\n", freq / 1000000); |
| freq = decode_pll(PLL_USBOTG, MXC_HCLK); |
| printf("PLL_OTG %8d MHz\n", freq / 1000000); |
| freq = decode_pll(PLL_ENET, MXC_HCLK); |
| printf("PLL_NET %8d MHz\n", freq / 1000000); |
| |
| printf("\n"); |
| printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); |
| printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); |
| #ifdef CONFIG_MXC_SPI |
| printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); |
| #endif |
| printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); |
| printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); |
| printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); |
| printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); |
| printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); |
| printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); |
| printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000); |
| printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000); |
| printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); |
| |
| return 0; |
| } |
| |
| void enable_ipu_clock(void) |
| { |
| struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| int reg; |
| reg = readl(&mxc_ccm->CCGR3); |
| reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK; |
| writel(reg, &mxc_ccm->CCGR3); |
| } |
| /***************************************************/ |
| |
| U_BOOT_CMD( |
| clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks, |
| "display clocks", |
| "" |
| ); |