diff --git a/Makefile b/Makefile
index a282342..5316504 100644
--- a/Makefile
+++ b/Makefile
@@ -412,7 +412,7 @@
 	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 
 v38b_config: unconfig
-	@./mkconfig -a V38B ppc mpc5xxx v38b
+	@./mkconfig -a v38b ppc mpc5xxx v38b
 
 inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 0d86518..05bb723 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -295,7 +295,6 @@
 #endif
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4	0x01000000UL
 
 void init_ide_reset (void)
 {
@@ -311,9 +310,9 @@
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 4508438..12acc57 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -186,8 +186,6 @@
  *****************************************************************************/
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -202,9 +200,9 @@
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6c98f13..f14331b 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -199,8 +199,6 @@
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@@ -215,9 +213,9 @@
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 	}
 }
 #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@
 	debug("init_ata_reset\n");
 
 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
 	__asm__ volatile ("sync");
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 2b47012..1f30d45 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -199,8 +199,6 @@
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@@ -215,9 +213,9 @@
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 	}
 }
 #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@
 	debug("init_power_switch\n");
 
 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
 	__asm__ volatile ("sync");
@@ -272,10 +270,10 @@
 	debug("ide_set_reset(%d)\n", power);
 
 	if (power) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_WU6;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
 		*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 		if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
 		    0) {
 			*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 4f056b2..f958b32 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -308,8 +308,6 @@
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -318,7 +316,7 @@
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
 }
 
 void ide_set_reset (int idereset)
@@ -326,11 +324,11 @@
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
index 29878f9..d670cc3 100644
--- a/board/inka4x0/inka4x0.c
+++ b/board/inka4x0/inka4x0.c
@@ -173,9 +173,6 @@
 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 }
 
-#define GPIO_WKUP_7	0x80000000UL
-#define GPIO_PSC3_9	0x04000000UL
-
 int misc_init_f (void)
 {
 	uchar tmp[10];
@@ -218,13 +215,13 @@
 	*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
 
 	/* Set LR mirror bit because it is low-active */
-	*(vu_long *)MPC5XXX_WU_GPIO_DATA    |= GPIO_WKUP_7;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O    |= GPIO_WKUP_7;
 	/*
 	 * Reset Coral-P graphics controller
 	 */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC3_9;
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC3_9;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC3_9;
 	return 0;
 }
 
@@ -241,8 +238,6 @@
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -251,7 +246,7 @@
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
 }
 
 void ide_set_reset (int idereset)
@@ -259,11 +254,11 @@
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 1d81dce..cb57a5e 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -341,9 +341,7 @@
 #define SM501_GPIO_DATA_DIR_HIGH	0x0001000CUL
 #define SM501_GPIO_DATA_HIGH		0x00010004UL
 #define SM501_GPIO_51			0x00080000UL
-#else
-#define GPIO_PSC1_4	0x01000000UL
-#endif
+#endif /* CONFIG MINIFAP */
 
 void init_ide_reset (void)
 {
@@ -381,9 +379,9 @@
 	}
 #else
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 #endif
 }
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
index aaa629e..4e2494e 100644
--- a/board/v38b/ethaddr.c
+++ b/board/v38b/ethaddr.c
@@ -1,5 +1,4 @@
 /*
- *
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -25,48 +24,13 @@
 #include <common.h>
 #include <mpc5xxx.h>
 
-#define GPIO_ENABLE	(MPC5XXX_WU_GPIO)
-
-/* Open Drain Emulation Register */
-#define GPIO_ODR	(MPC5XXX_WU_GPIO + 0x04)
-
-/* Data Direction Register */
-#define GPIO_DDR	(MPC5XXX_WU_GPIO + 0x08)
-
-/* Data Value Out Register */
-#define GPIO_DVOR	(MPC5XXX_WU_GPIO + 0x0C)
-
-/* Interrupt Enable Register */
-#define GPIO_IER	(MPC5XXX_WU_GPIO + 0x10)
-
-/* Individual Interrupt Enable Register */
-#define GPIO_IIER	(MPC5XXX_WU_GPIO + 0x14)
-
-/* Interrupt Type Register */
-#define GPIO_ITR	(MPC5XXX_WU_GPIO + 0x18)
-
-/* Master Enable Register */
-#define GPIO_MER	(MPC5XXX_WU_GPIO + 0x1C)
-
-/* Data Input Value Register */
-#define GPIO_DIVR	(MPC5XXX_WU_GPIO + 0x20)
-
-/* Status Register */
-#define GPIO_SR		(MPC5XXX_WU_GPIO + 0x24)
-
-#define PSC6_0		0x10000000
-#define WKUP_7		0x80000000
-
-/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
-#define GPIO_PIN	PSC6_0
+/* For the V38B board the pin is GPIO_PSC_6 */
+#define GPIO_PIN	GPIO_PSC6_0
 
 #define NO_ERROR	0
 #define ERR_NO_NUMBER	1
 #define ERR_BAD_NUMBER	2
 
-typedef volatile unsigned long GPIO_REG;
-typedef GPIO_REG *GPIO_REG_PTR;
-
 static int is_high(void);
 static int check_device(void);
 static void io_out(int value);
@@ -79,33 +43,34 @@
 void read_2501_memory(unsigned char *psernum, unsigned char *perr);
 void board_get_enetaddr(uchar *enetaddr);
 
+
 static int is_high()
 {
-	return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
+	return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
 }
 
 static void io_out(int value)
 {
 	if (value)
-		*((vu_long *) GPIO_DVOR) |= GPIO_PIN;
+		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
 	else
-		*((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
+		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
 }
 
 static void io_input()
 {
-	*((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
+	*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
 	udelay(3);	/* allow input to settle */
 }
 
 static void io_output()
 {
-	*((vu_long *) GPIO_DDR) |= GPIO_PIN;
+	*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
 }
 
 static void init_gpio()
 {
-	*((vu_long *) GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
+	*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
 }
 
 void read_2501_memory(unsigned char *psernum, unsigned char *perr)
@@ -117,8 +82,8 @@
 	*perr = 0;
 	crcval = 0;
 
-	for (i=0; i<NBYTES; i++)
-
+	for (i = 0; i < NBYTES; i++)
+		buf[i] = 0;
 
 	if (!check_device())
 		*perr = ERR_NO_NUMBER;
@@ -130,10 +95,10 @@
 		write_byte(0x00);
 		read_byte(&crcval);		/* Read CRC of address and command */
 
-		for (i=0; i<NBYTES; i++)
-			read_byte( &buf[i] );
+		for (i = 0; i < NBYTES; i++)
+			read_byte(&buf[i]);
 	}
-	if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
+	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
 		*perr = ERR_BAD_NUMBER;
 		psernum[0] = 0x00;
 		psernum[1] = 0xE0;
@@ -141,8 +106,7 @@
 		psernum[3] = 0xFF;
 		psernum[4] = 0xFF;
 		psernum[5] = 0xFF;
-	}
-	else {
+	} else {
 		psernum[0] = 0x00;
 		psernum[1] = 0xE0;
 		psernum[2] = 0xEE;
@@ -173,27 +137,23 @@
 {
 	char i;
 
-	for (i=0; i<8; i++) {
+	for (i = 0; i < 8; i++) {
 		/* 1 us to 15 us low pulse starts bit slot */
 		/* Start with high pulse for 3 us */
 		io_input();
-
 		udelay(3);
 
 		io_out(0);
 		io_output();
-
 		udelay(3);
 
 		if (command & 0x01) {
 			/* 60 us high for 1-bit */
 			io_input();
 			udelay(60);
-		}
-		else {
+		} else
 			/* 60 us low for 0-bit */
 			udelay(60);
-		}
 		/*  Leave pin as input */
 		io_input();
 
@@ -201,11 +161,11 @@
 	}
 }
 
-static void read_byte(unsigned char  *data)
+static void read_byte(unsigned char *data)
 {
 	unsigned char i, rdat = 0;
 
-	for (i=0; i<8; i++) {
+	for (i = 0; i < 8; i++) {
 		/* read one bit from one-wire device */
 
 		/* 1 - 15 us low starts bit slot */
@@ -233,22 +193,21 @@
 
 void board_get_enetaddr(uchar *enetaddr)
 {
-	unsigned char sn[6], err=NO_ERROR;
+	unsigned char sn[6], err = NO_ERROR;
 
 	init_gpio();
 
 	read_2501_memory(sn, &err);
 
 	if (err == NO_ERROR) {
-		sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
 				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
 		printf("MAC address: %s\n", enetaddr);
-		setenv("ethaddr", enetaddr);
-	}
-	else {
-		sprintf(enetaddr, "00:01:02:03:04:05");
+		setenv("ethaddr", (char *)enetaddr);
+	} else {
+		sprintf((char *)enetaddr, "00:01:02:03:04:05");
 		printf("Error reading MAC address.\n");
 		printf("Setting default to %s\n", enetaddr);
-		setenv("ethaddr", enetaddr);
+		setenv("ethaddr", (char *)enetaddr);
 	}
 }
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
index 6ec5256..4fdea6b 100644
--- a/board/v38b/u-boot.lds
+++ b/board/v38b/u-boot.lds
@@ -61,6 +61,7 @@
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -93,11 +94,13 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index 99fe7db..dede996 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -28,43 +28,44 @@
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+
 #ifndef CFG_RAMBOOT
 static void sdram_start(int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 #if SDRAM_DDR
 	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
 	__asm__ volatile ("sync");
 
 	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */
 
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
 	__asm__ volatile ("sync");
 
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
 }
 #endif /* !CFG_RAMBOOT */
@@ -80,18 +81,18 @@
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
 	__asm__ volatile ("sync");
 
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 	__asm__ volatile ("sync");
 
 #if SDRAM_DDR
 	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */
 
@@ -112,20 +113,20 @@
 
 	/* set SDRAM CS0 size according to the amount of RAM found */
 	if (dramsize > 0)
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
 	else
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
 
 	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
 
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -139,22 +140,22 @@
 
 	/* set SDRAM CS1 size according to the amount of RAM found */
 	if (dramsize2 > 0)
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
 			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
 	else
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 
 #else /* CFG_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
 	if (dramsize >= 0x13)
 		dramsize = (1 << (dramsize - 0x13)) << 20;
 	else
 		dramsize = 0;
 
 	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
 	if (dramsize2 >= 0x13)
 		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
 	else
@@ -176,7 +177,7 @@
 	if ((SVR_MJREV(svr) >= 2) &&
 		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
 
-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		*(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
 		__asm__ volatile ("sync");
 	}
 
@@ -194,27 +195,42 @@
 int board_early_init_r(void)
 {
 	/*
+	 * Now, when we are in RAM, enable flash write access for the
+	 * detection process.  Note that CS_BOOT cannot be cleared when
+	 * executing in flash.
+	 */
+	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+
+#ifdef CONFIG_HW_WATCHDOG
+	/*
+	 * Enable and configure the direction (output) of PSC3_9 - watchdog
+	 * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
+	 * Manual.
+	 */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
+#endif /* CONFIG_HW_WATCHDOG */
+
+	/*
-	 * Now, when we are in RAM, enable flash write access for detection process.
-	 * Note that CS_BOOT cannot be cleared when executing in flash.
+	 * Enable GPIO_WKUP_7 to "read the status of the actual power
+	 * situation". Default direction is input, so no need to set it
+	 * explicitly.
 	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
 	return 0;
 }
 
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
 
 	/* Configure PSC1_4 as GPIO output for ATA reset */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 }
 
 
@@ -223,30 +239,22 @@
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
 
 
-void led_d4_on(void)
-{
-	/* TIMER7 as GPIO output low */
-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
-}
-
-
-void led_d4_off(void)
-{
-	/* TIMER7 as GPIO output high */
-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
-}
-
-
+#ifdef CONFIG_HW_WATCHDOG
 void hw_watchdog_reset(void)
 {
-/* TODO fill this in */
+	/*
+	 * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
+	 * we need a positive or negative transition on WDI i.e., our PSC3_9.
+	 */
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
 }
+#endif /* CONFIG_HW_WATCHDOG */
diff --git a/include/configs/V38B.h b/include/configs/v38b.h
similarity index 63%
rename from include/configs/V38B.h
rename to include/configs/v38b.h
index 8eea504..cf2d031 100644
--- a/include/configs/V38B.h
+++ b/include/configs/v38b.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
  * wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this project.
@@ -11,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  * for more details.
  *
  * You should have received a copy of the GNU General Public License along
@@ -22,51 +22,41 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if 0
-#define DEBUG 0xFFF
-#endif
-
-#if 0
-#define DEBUG 0x01
-#endif
-
 /*
  * High Level Configuration Options
  * (easy to change)
-*/
+ */
+#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
+#define CONFIG_V38B			1	/* ...on V38B board */
+#define CFG_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */
 
-#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU	*/
-#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU	*/
-#define CONFIG_V38B			1	/* ... on V38B board		*/
-#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz	*/
+#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC */
+#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM */
 
-#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC		*/
-#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM		*/
-#define CONFIG_HW_WATCHDOG		1	/* has watchdog			*/
+#define CONFIG_HW_WATCHDOG		1	/* has watchdog */
 
 #define CONFIG_NETCONSOLE		1
 
-#define CONFIG_BOARD_EARLY_INIT_R	1	/* make flash read/write	*/
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
 
-#define CFG_XLB_PIPELINING		1	/* gives better performance	*/
+#define CFG_XLB_PIPELINING		1	/* gives better performance */
 
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Serial console configuration
  */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
 /*
  * DDR
  */
@@ -79,7 +69,6 @@
 #define SDRAM_CONFIG2		0x47770000
 #define SDRAM_TAPDELAY		0x10000000
 
-
 /*
  * PCI - no suport
  */
@@ -96,13 +85,13 @@
  */
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_STORAGE
-
-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
 
 /*
  * Supported commands
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
 				 CFG_CMD_FAT	| \
 				 CFG_CMD_I2C	| \
 				 CFG_CMD_IDE	| \
@@ -112,53 +101,63 @@
 				 CFG_CMD_IRQ	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_MII	| \
-				 CFG_CMD_SDRAMi | \
+				 CFG_CMD_SDRAMi	| \
 				 CFG_CMD_DATE	| \
 				 CFG_CMD_USB	| \
 				 CFG_CMD_FAT)
 
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
 /*
  * Boot low with 16 MB Flash
  */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#define CFG_LOWBOOT		1
+#define CFG_LOWBOOT16		1
 
 /*
  * Autobooting
  */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 
-#define CONFIG_PREBOOT	"echo;" \
+#define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
 
-#undef	CONFIG_BOOTARGS
+#undef CONFIG_BOOTARGS
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	"bootcmd=run net_nfs\0"						\
+	"bootdelay=3\0"							\
+	"baudrate=115200\0"						\
+	"preboot=echo;echo Type \"run flash_nfs\" to mount root "	\
+		"filesystem over NFS; echo\0"				\
 	"netdev=eth0\0"							\
-	"devno=5\0"							\
-	"hostname=V38B_$(devno)\0"					\
-	"ipaddr=10.100.99.$(devno)\0"					\
-	"netmask=255.255.0.0\0"						\
-	"serverip=10.100.10.90\0"					\
-	"gatewayip=10.100.254.254\0"					\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=mpc5200/uImage\0"					\
-	"bootcmd=run net_nfs\0"						\
 	"addip=setenv bootargs $(bootargs) "				\
 		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
 		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
 	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
 	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
 		"$(ramdisk_addr)\0"					\
-	"net_nfs=tftp 200000 $(bootfile);run nfsargs "			\
-		"addip;bootm\0"						\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"hostname=v38b\0"						\
+	"ethact=FEC ETHERNET\0"						\
+	"rootpath=/opt/eldk-3.1.1/ppc_6xx\0"				\
+	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "	\
+		"cp.b 200000 ff000000 $(filesize);"			\
+		"prot on ff000000 ff03ffff\0"				\
+	"load=tftp 200000 $(u-boot)\0"					\
+	"netmask=255.255.0.0\0"						\
+	"ipaddr=192.168.160.18\0"					\
+	"serverip=192.168.1.1\0"					\
+	"ethaddr=00:e0:ee:00:05:2e\0"					\
+	"bootfile=/tftpboot/v38b/uImage\0"				\
+	"u-boot=/tftpboot/v38b/u-boot.bin\0"				\
 	""
 
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
@@ -169,13 +168,13 @@
  */
 #undef CFG_IPBSPEED_133			/* define for 133MHz speed */
 #endif
+
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
-
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SPEED		100000	/* 100 kHz */
 #define CFG_I2C_SLAVE		0x7F
 
 /*
@@ -196,7 +195,7 @@
  */
 #define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
-#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_CFI_AMD_RESET	1
 #define CFG_FLASH_BASE		0xFF000000
 #define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
 #define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
@@ -224,19 +223,18 @@
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
 #define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */
 
 /*
  * Ethernet configuration
@@ -253,19 +251,19 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */
 
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 
@@ -274,14 +272,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CFG_HID0_FINAL		HID0_ICE
-#else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
-#endif
-
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
@@ -294,55 +286,39 @@
 
 #define CFG_RESET_ADDRESS	0xff000000
 
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00001000
-
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
+/*
+ * IDE/ATA (supports IDE harddisk)
  */
+#undef CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT		/* Direct IDE not supported */
+#undef CONFIG_IDE_LED			/* LED for ide not supported */
 
-#undef	CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card	Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-
-#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_RESET		/* reset for ide supported */
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */
 
 #define CFG_ATA_IDE0_OFFSET	0x0000
 
 #define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
 
-/* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CFG_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */
 
-/* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)	/* normal register accesses offset */
 
-/* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CFG_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */
 
-/* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CFG_ATA_STRIDE		4		/* Interval between registers */
 
-/* Status LED						     */
-
-#define	 CONFIG_STATUS_LED		 /* Status LED enabled		 */
-#define	 CONFIG_BOARD_SPECIFIC_LED	 /* version has board specific leds */
-
-#define CFG_LED_BASE	(0xf0000600 + 0x70)	/* Timer 7 GPIO */
+/*
+ * Status LED
+ */
+#define  CONFIG_STATUS_LED		/* Status LED enabled */
+#define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
 
+#define CFG_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
 #ifndef __ASSEMBLY__
-/* LEDs */
 typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
@@ -359,10 +335,9 @@
 	} while(0)
 
 #define __led_init(_msk, st) \
-	{ \
+	do { \
 		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
-	}
-
-#endif
+	} while(0)
+#endif /* __ASSEMBLY__ */
 
 #endif /* __CONFIG_H */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 1d20d1d..089aa13 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -188,7 +188,14 @@
 #define MPC5XXX_WU_GPIO_ENABLE  (MPC5XXX_WU_GPIO + 0x0000)
 #define MPC5XXX_WU_GPIO_ODE     (MPC5XXX_WU_GPIO + 0x0004)
 #define MPC5XXX_WU_GPIO_DIR     (MPC5XXX_WU_GPIO + 0x0008)
-#define MPC5XXX_WU_GPIO_DATA    (MPC5XXX_WU_GPIO + 0x000c)
+#define MPC5XXX_WU_GPIO_DATA_O  (MPC5XXX_WU_GPIO + 0x000c)
+#define MPC5XXX_WU_GPIO_DATA_I  (MPC5XXX_WU_GPIO + 0x0020)
+
+/* GPIO pins */
+#define GPIO_WKUP_7		0x80000000UL
+#define GPIO_PSC6_0		0x10000000UL
+#define GPIO_PSC3_9		0x04000000UL
+#define GPIO_PSC1_4		0x01000000UL
 
 /* PCI registers */
 #define MPC5XXX_PCI_CMD		(MPC5XXX_PCI + 0x04)