mmc: stm32_sdmmc2: introduce of_to_plat ops
Add the uclass ops of_to_plat to parse the device tree properties
to respect the expected sequence by the driver model.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c
index 41f375b..bfce8a2 100644
--- a/drivers/mmc/stm32_sdmmc2.c
+++ b/drivers/mmc/stm32_sdmmc2.c
@@ -645,6 +645,47 @@
.host_power_cycle = stm32_sdmmc2_host_power_cycle,
};
+static int stm32_sdmmc2_of_to_plat(struct udevice *dev)
+{
+ struct stm32_sdmmc2_plat *plat = dev_get_plat(dev);
+ struct mmc_config *cfg = &plat->cfg;
+ int ret;
+
+ plat->base = dev_read_addr(dev);
+ if (plat->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ if (dev_read_bool(dev, "st,neg-edge"))
+ plat->clk_reg_msk |= SDMMC_CLKCR_NEGEDGE;
+ if (dev_read_bool(dev, "st,sig-dir"))
+ plat->pwr_reg_msk |= SDMMC_POWER_DIRPOL;
+ if (dev_read_bool(dev, "st,use-ckin"))
+ plat->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN;
+
+ cfg->f_min = 400000;
+ cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+ cfg->name = "STM32 SD/MMC";
+ cfg->host_caps = 0;
+ cfg->f_max = 52000000;
+ ret = mmc_of_parse(dev, cfg);
+ if (ret)
+ return ret;
+
+ ret = clk_get_by_index(dev, 0, &plat->clk);
+ if (ret)
+ return ret;
+
+ ret = reset_get_by_index(dev, 0, &plat->reset_ctl);
+ if (ret)
+ dev_dbg(dev, "No reset provided\n");
+
+ gpio_request_by_name(dev, "cd-gpios", 0, &plat->cd_gpio,
+ GPIOD_IS_IN);
+
+ return 0;
+}
+
static int stm32_sdmmc2_probe_level_translator(struct udevice *dev)
{
struct stm32_sdmmc2_plat *plat = dev_get_plat(dev);
@@ -653,12 +694,6 @@
struct gpio_desc ckin_gpio;
int clk_hi, clk_lo, ret;
- /*
- * Assume the level translator is present if st,use-ckin is set.
- * This is to cater for DTs which do not implement this test.
- */
- plat->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN;
-
ret = gpio_request_by_name(dev, "st,cmd-gpios", 0, &cmd_gpio,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret)
@@ -709,54 +744,23 @@
{
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct stm32_sdmmc2_plat *plat = dev_get_plat(dev);
- struct mmc_config *cfg = &plat->cfg;
int ret;
- plat->base = dev_read_addr(dev);
- if (plat->base == FDT_ADDR_T_NONE)
- return -EINVAL;
-
- if (dev_read_bool(dev, "st,neg-edge"))
- plat->clk_reg_msk |= SDMMC_CLKCR_NEGEDGE;
- if (dev_read_bool(dev, "st,sig-dir"))
- plat->pwr_reg_msk |= SDMMC_POWER_DIRPOL;
- if (dev_read_bool(dev, "st,use-ckin"))
- stm32_sdmmc2_probe_level_translator(dev);
-
- ret = clk_get_by_index(dev, 0, &plat->clk);
- if (ret)
- return ret;
-
ret = clk_enable(&plat->clk);
- if (ret)
- goto clk_free;
-
- ret = reset_get_by_index(dev, 0, &plat->reset_ctl);
- if (ret)
- dev_dbg(dev, "No reset provided\n");
-
- gpio_request_by_name(dev, "cd-gpios", 0, &plat->cd_gpio,
- GPIOD_IS_IN);
-
- cfg->f_min = 400000;
- cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- cfg->name = "STM32 SD/MMC";
-
- cfg->host_caps = 0;
- cfg->f_max = 52000000;
- mmc_of_parse(dev, cfg);
+ if (ret) {
+ clk_free(&plat->clk);
+ return ret;
+ }
upriv->mmc = &plat->mmc;
+ if (plat->clk_reg_msk & SDMMC_CLKCR_SELCLKRX_CKIN)
+ stm32_sdmmc2_probe_level_translator(dev);
+
/* SDMMC init */
stm32_sdmmc2_reset(plat);
- return 0;
-clk_free:
- clk_free(&plat->clk);
-
- return ret;
+ return 0;
}
static int stm32_sdmmc2_bind(struct udevice *dev)
@@ -778,5 +782,6 @@
.ops = &stm32_sdmmc2_ops,
.probe = stm32_sdmmc2_probe,
.bind = stm32_sdmmc2_bind,
+ .of_to_plat = stm32_sdmmc2_of_to_plat,
.plat_auto = sizeof(struct stm32_sdmmc2_plat),
};