arm: kirkwood: lsxl: enable DM for SATA
Switch from legacy IDE driver to sata_mv driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig
index e1ff355..c550798 100644
--- a/configs/lschlv2_defconfig
+++ b/configs/lschlv2_defconfig
@@ -16,7 +16,7 @@
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -26,7 +26,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
+CONFIG_SATA_MV=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig
index 48678bd..efcce45 100644
--- a/configs/lsxhl_defconfig
+++ b/configs/lsxhl_defconfig
@@ -16,7 +16,7 @@
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -26,7 +26,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
+CONFIG_SATA_MV=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 72e6265..55c4e63 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -76,9 +76,9 @@
"kernel_addr=0x00800000\0" \
"ramdisk_addr=0x01000000\0" \
"fdt_addr=0x00ff0000\0" \
- "bootcmd_legacy=ide reset " \
- "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
- "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+ "bootcmd_legacy=sata init " \
+ "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
+ "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
"&& tftpboot ${ramdisk_addr} initrd.img " \
@@ -86,11 +86,11 @@
"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
"&& bootz ${kernel_addr} " \
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
- "bootcmd_hdd=ide reset " \
- "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
- "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
+ "bootcmd_hdd=sata init " \
+ "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \
+ "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \
"&& setenv ramdisk_len ${filesize} " \
- "&& load ide ${hdpart} ${fdt_addr} /dtb " \
+ "&& load sata ${hdpart} ${fdt_addr} /dtb " \
"&& bootz ${kernel_addr} " \
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_usb=usb start " \
@@ -131,13 +131,10 @@
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */
-#ifdef CONFIG_IDE
-#undef CONFIG_SYS_IDE_MAXBUS
-#define CONFIG_SYS_IDE_MAXBUS 1
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
#endif
#endif /* _CONFIG_LSXL_H */