Merge branch '2021-01-18-assorted-platform-updates'
- Assorted MediaTek, AST2x00 updates
- Assorted driver fixes for various platforms
- Keymile platform updates
- Add pwm command, mp5416 pmic driver
diff --git a/MAINTAINERS b/MAINTAINERS
index 26dd254..a7a62df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -198,6 +198,9 @@
F: drivers/spi/ca_sflash.c
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
+F: drivers/mtd/nand/raw/cortina_nand.c
+F: drivers/mtd/nand/raw/cortina_nand.h
+F: configs/cortina_presidio-asic-pnand_defconfig
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun@nic.cz>
diff --git a/README b/README
index 5ca11f2..89606c8 100644
--- a/README
+++ b/README
@@ -3153,6 +3153,7 @@
sspi - SPI utility commands
base - print or set address offset
printenv- print environment variables
+pwm - control pwm channels
setenv - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a9d36e0..e320c22 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -960,6 +960,7 @@
dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
+dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts
new file mode 100644
index 0000000..2abd313
--- /dev/null
+++ b/arch/arm/dts/ast2600-evb.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "ast2600-u-boot.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ aliases {
+ mmc0 = &emmc_slot0;
+ mmc1 = &sdhci_slot0;
+ mmc2 = &sdhci_slot1;
+ spi0 = &fmc;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ ethernet2 = &mac2;
+ ethernet3 = &mac3;
+ };
+
+ cpus {
+ cpu@0 {
+ clock-frequency = <800000000>;
+ };
+ cpu@1 {
+ clock-frequency = <800000000>;
+ };
+ };
+};
+
+&uart5 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&sdrammc {
+ clock-frequency = <400000000>;
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fmcquad_default>;
+
+ flash@0 {
+ compatible = "spi-flash", "sst,w25q256";
+ status = "okay";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+
+ flash@1 {
+ compatible = "spi-flash", "sst,w25q256";
+ status = "okay";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+
+ flash@2 {
+ compatible = "spi-flash", "sst,w25q256";
+ status = "okay";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
+ &pinctrl_spi1cs1_default &pinctrl_spi1wp_default
+ &pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
+
+ flash@0 {
+ compatible = "spi-flash", "sst,w25q256";
+ status = "okay";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+ &pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
+
+ flash@0 {
+ compatible = "spi-flash", "sst,w25q256";
+ status = "okay";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+ timing-phase = <0x700ff>;
+};
+
+&emmc_slot0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc_default>;
+ sdhci-drive-type = <1>;
+};
+
+&i2c4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+};
+
+&i2c5 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+};
+
+&i2c6 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+};
+
+&i2c8 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+};
+
+&scu {
+ mac0-clk-delay = <0x1d 0x1c
+ 0x10 0x17
+ 0x10 0x17>;
+ mac1-clk-delay = <0x1d 0x10
+ 0x10 0x10
+ 0x10 0x10>;
+ mac2-clk-delay = <0x0a 0x04
+ 0x08 0x04
+ 0x08 0x04>;
+ mac3-clk-delay = <0x0a 0x04
+ 0x08 0x04
+ 0x08 0x04>;
+};
diff --git a/arch/arm/dts/ast2600-u-boot.dtsi b/arch/arm/dts/ast2600-u-boot.dtsi
new file mode 100644
index 0000000..4648c07
--- /dev/null
+++ b/arch/arm/dts/ast2600-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/reset/ast2600-reset.h>
+
+#include "ast2600.dtsi"
+
+/ {
+ scu: clock-controller@1e6e2000 {
+ compatible = "aspeed,ast2600-scu";
+ reg = <0x1e6e2000 0x1000>;
+ u-boot,dm-pre-reloc;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ uart-clk-source = <0x0>; /* uart clock source selection: 0: uxclk 1: huxclk*/
+ };
+
+ rst: reset-controller {
+ u-boot,dm-pre-reloc;
+ compatible = "aspeed,ast2600-reset";
+ aspeed,wdt = <&wdt1>;
+ #reset-cells = <1>;
+ };
+
+ sdrammc: sdrammc@1e6e0000 {
+ u-boot,dm-pre-reloc;
+ compatible = "aspeed,ast2600-sdrammc";
+ reg = <0x1e6e0000 0x100
+ 0x1e6e0100 0x300
+ 0x1e6e0400 0x200 >;
+ #reset-cells = <1>;
+ clocks = <&scu ASPEED_CLK_MPLL>;
+ resets = <&rst ASPEED_RESET_SDRAM>;
+ };
+
+ ahb {
+ u-boot,dm-pre-reloc;
+
+ apb {
+ u-boot,dm-pre-reloc;
+ };
+
+ };
+};
+
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
new file mode 100644
index 0000000..ac0f08b
--- /dev/null
+++ b/arch/arm/dts/ast2600.dtsi
@@ -0,0 +1,1946 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "Aspeed BMC";
+ compatible = "aspeed,ast2600";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ serial9 = &uart10;
+ serial10 = &uart11;
+ serial11 = &uart12;
+ serial12 = &uart13;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "aspeed,ast2600-smp";
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf00>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf01>;
+ };
+
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_memory: video {
+ size = <0x04000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ no-map;
+ };
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges;
+
+ gic: interrupt-controller@40461000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ reg = <0x40461000 0x1000>,
+ <0x40462000 0x1000>,
+ <0x40464000 0x2000>,
+ <0x40466000 0x2000>;
+ };
+
+ ahbc: ahbc@1e600000 {
+ compatible = "aspeed,aspeed-ahbc";
+ reg = < 0x1e600000 0x100>;
+ };
+
+ fmc: flash-controller@1e620000 {
+ reg = < 0x1e620000 0xc4
+ 0x20000000 0x10000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2600-fmc";
+ status = "disabled";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_AHB>;
+ num-cs = <3>;
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@2 {
+ reg = < 2 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ spi1: flash-controller@1e630000 {
+ reg = < 0x1e630000 0xc4
+ 0x30000000 0x08000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2600-spi";
+ clocks = <&scu ASPEED_CLK_AHB>;
+ num-cs = <2>;
+ status = "disabled";
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ spi2: flash-controller@1e631000 {
+ reg = < 0x1e631000 0xc4
+ 0x50000000 0x08000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2600-spi";
+ clocks = <&scu ASPEED_CLK_AHB>;
+ num-cs = <3>;
+ status = "disabled";
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@1 {
+ reg = < 1 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ flash@2 {
+ reg = < 2 >;
+ compatible = "jedec,spi-nor";
+ status = "disabled";
+ };
+ };
+
+ edac: sdram@1e6e0000 {
+ compatible = "aspeed,ast2600-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mdio: ethernet@1e650000 {
+ compatible = "aspeed,aspeed-mdio";
+ reg = <0x1e650000 0x40>;
+ resets = <&rst ASPEED_RESET_MII>;
+ status = "disabled";
+ };
+
+ mac0: ftgmac@1e660000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>, <0x1e650000 0x4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_MAC1CLK>;
+ status = "disabled";
+ };
+
+ mac1: ftgmac@1e680000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>, <0x1e650008 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_MAC2CLK>;
+ status = "disabled";
+ };
+
+ mac2: ftgmac@1e670000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e670000 0x180>, <0x1e650010 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_MAC3CLK>;
+ status = "disabled";
+ };
+
+ mac3: ftgmac@1e690000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e690000 0x180>, <0x1e650018 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_MAC4CLK>;
+ status = "disabled";
+ };
+
+ ehci0: usb@1e6a1000 {
+ compatible = "aspeed,aspeed-ehci", "usb-ehci";
+ reg = <0x1e6a1000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ah_default>;
+ status = "disabled";
+ };
+
+ ehci1: usb@1e6a3000 {
+ compatible = "aspeed,aspeed-ehci", "usb-ehci";
+ reg = <0x1e6a3000 0x100>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_USBPORT2CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2bh_default>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g6-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ ranges = <0 0x1e6e2000 0x1000>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g6-pinctrl";
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ };
+
+ vga_scratch: scratch {
+ compatible = "aspeed,bmc-misc";
+ };
+
+ scu_ic0: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2600-scu-ic";
+ reg = <0x560 0x10>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ scu_ic1: interrupt-controller@1 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2600-scu-ic";
+ reg = <0x570 0x10>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ };
+
+ smp-memram@0 {
+ compatible = "aspeed,ast2600-smpmem", "syscon";
+ reg = <0x1e6e2180 0x40>;
+ };
+
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
+
+ pcie_bridge0: pcie@1e6ed000 {
+ compatible = "aspeed,ast2600-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x1e6ed000 0x100>;
+ ranges = <0x81000000 0x0 0x0 0x0 0x0 0x10000>,
+ <0x82000000 0x0 0x60000000 0x60000000 0x0 0x10000000>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ resets = <&rst ASPEED_RESET_PCIE_DEV_O>;
+ cfg-handle = <&pcie_cfg0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0rc_default>;
+
+ status = "disabled";
+ };
+
+ pcie_bridge1: pcie@1e6ed200 {
+ compatible = "aspeed,ast2600-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x1e6ed200 0x100>;
+ ranges = <0x81000000 0x0 0x0 0x10000 0x00 0x10000>,
+ <0x82000000 0x0 0x70000000 0x70000000 0x0 0x10000000>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ resets = <&rst ASPEED_RESET_PCIE_RC_O>;
+ cfg-handle = <&pcie_cfg1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1rc_default>;
+
+ status = "disabled";
+ };
+
+ sdhci: sdhci@1e740000 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,aspeed-sdhci-irq", "simple-mfd";
+ reg = <0x1e740000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ clocks = <&scu ASPEED_CLK_GATE_SDCLK>,
+ <&scu ASPEED_CLK_GATE_SDEXTCLK>;
+ clock-names = "ctrlclk", "extclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e740000 0x1000>;
+
+ sdhci_slot0: sdhci_slot0@100 {
+ compatible = "aspeed,sdhci-ast2600";
+ reg = <0x100 0x100>;
+ interrupts = <0>;
+ interrupt-parent = <&sdhci>;
+ sdhci,auto-cmd12;
+ clocks = <&scu ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+
+ sdhci_slot1: sdhci_slot1@200 {
+ compatible = "aspeed,sdhci-ast2600";
+ reg = <0x200 0x100>;
+ interrupts = <1>;
+ interrupt-parent = <&sdhci>;
+ sdhci,auto-cmd12;
+ clocks = <&scu ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+ };
+
+ emmc: emmc@1e750000 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,aspeed-emmc-irq", "simple-mfd";
+ reg = <0x1e750000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>,
+ <&scu ASPEED_CLK_GATE_EMMCEXTCLK>;
+ clock-names = "ctrlclk", "extclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e750000 0x1000>;
+
+ emmc_slot0: emmc_slot0@100 {
+ compatible = "aspeed,emmc-ast2600";
+ reg = <0x100 0x100>;
+ interrupts = <0>;
+ interrupt-parent = <&emmc>;
+ clocks = <&scu ASPEED_CLK_EMMC>;
+ status = "disabled";
+ };
+ };
+
+ h2x: h2x@1e770000 {
+ compatible = "aspeed,ast2600-h2x";
+ reg = <0x1e770000 0x100>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst ASPEED_RESET_H2X>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e770000 0x100>;
+
+ status = "disabled";
+
+ pcie_cfg0: cfg0@80 {
+ reg = <0x80 0x80>;
+ compatible = "aspeed,ast2600-pcie-cfg";
+ };
+
+ pcie_cfg1: cfg1@C0 {
+ compatible = "aspeed,ast2600-pcie-cfg";
+ reg = <0xC0 0x80>;
+ };
+ };
+
+ gpio0: gpio@1e780000 {
+ compatible = "aspeed,ast2600-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ ngpios = <208>;
+ };
+
+ gpio1: gpio@1e780800 {
+ compatible = "aspeed,ast2600-gpio";
+ reg = <0x1e780800 0x800>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ gpio-ranges = <&pinctrl 0 0 208>;
+ ngpios = <36>;
+ };
+
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART1CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART5CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785000 0x40>;
+ };
+
+ wdt2: watchdog@1e785040 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785040 0x40>;
+ };
+
+ wdt3: watchdog@1e785080 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785080 0x40>;
+ };
+
+ wdt4: watchdog@1e7850C0 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e7850C0 0x40>;
+ };
+
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2600-lpc", "simple-mfd", "syscon";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ kcs1: kcs1@0 {
+ compatible = "aspeed,ast2600-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <1>;
+ kcs_addr = <0xCA0>;
+ status = "disabled";
+ };
+
+ kcs2: kcs2@0 {
+ compatible = "aspeed,ast2600-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <2>;
+ kcs_addr = <0xCA8>;
+ status = "disabled";
+ };
+
+ kcs3: kcs3@0 {
+ compatible = "aspeed,ast2600-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <3>;
+ kcs_addr = <0xCA2>;
+ };
+
+ kcs4: kcs4@0 {
+ compatible = "aspeed,ast2600-kcs-bmc";
+ reg = <0x0 0x120>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ kcs_chan = <4>;
+ kcs_addr = <0xCA4>;
+ status = "disabled";
+ };
+
+ lpc_ctrl: lpc-ctrl@80 {
+ compatible = "aspeed,ast2600-lpc-ctrl";
+ reg = <0x80 0x80>;
+ status = "disabled";
+ };
+
+ lpc_snoop: lpc-snoop@80 {
+ compatible = "aspeed,ast2600-lpc-snoop";
+ reg = <0x80 0x80>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ lhc: lhc@a0 {
+ compatible = "aspeed,ast2600-lhc";
+ reg = <0xa0 0x24 0xc8 0x8>;
+ };
+
+ lpc_reset: reset-controller@98 {
+ compatible = "aspeed,ast2600-lpc-reset";
+ reg = <0x98 0x4>;
+ #reset-cells = <1>;
+ status = "disabled";
+ };
+
+ ibt: ibt@140 {
+ compatible = "aspeed,ast2600-ibt-bmc";
+ reg = <0x140 0x18>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sio_regs: regs {
+ compatible = "aspeed,bmc-misc";
+ };
+
+ mbox: mbox@200 {
+ compatible = "aspeed,ast2600-mbox";
+ reg = <0x200 0x5c>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ uart2: serial@1e78d000 {
+ compatible = "ns16550a";
+ reg = <0x1e78d000 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART2CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart3: serial@1e78e000 {
+ compatible = "ns16550a";
+ reg = <0x1e78e000 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART3CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart4: serial@1e78f000 {
+ compatible = "ns16550a";
+ reg = <0x1e78f000 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART4CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ i2c: bus@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+ };
+
+ fsim0: fsi@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ reg = <0x1e79b000 0x94>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
+ status = "disabled";
+ };
+
+ fsim1: fsi@1e79b100 {
+ compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ reg = <0x1e79b100 0x94>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi2_default>;
+ clocks = <&scu ASPEED_CLK_GATE_FSICLK>;
+ status = "disabled";
+ };
+
+ uart6: serial@1e790000 {
+ compatible = "ns16550a";
+ reg = <0x1e790000 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART6CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart7: serial@1e790100 {
+ compatible = "ns16550a";
+ reg = <0x1e790100 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART7CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart8: serial@1e790200 {
+ compatible = "ns16550a";
+ reg = <0x1e790200 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART8CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart9: serial@1e790300 {
+ compatible = "ns16550a";
+ reg = <0x1e790300 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART9CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart10: serial@1e790400 {
+ compatible = "ns16550a";
+ reg = <0x1e790400 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART10CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart11: serial@1e790500 {
+ compatible = "ns16550a";
+ reg = <0x1e790400 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART11CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart12: serial@1e790600 {
+ compatible = "ns16550a";
+ reg = <0x1e790600 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART12CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart13: serial@1e790700 {
+ compatible = "ns16550a";
+ reg = <0x1e790700 0x20>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_GATE_UART13CLK>;
+ clock-frequency = <1846154>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ display_port: dp@1e6eb000 {
+ compatible = "aspeed,ast2600-displayport";
+ reg = <0x1e6eb000 0x200>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst ASPEED_RESET_DP> ,<&rst ASPEED_RESET_DP_MCU>;
+ status = "disabled";
+ };
+
+ };
+
+ };
+
+};
+
+&i2c {
+ i2cglobal: i2cg@00 {
+ compatible = "aspeed,ast2600-i2c-global";
+ reg = <0x0 0x40>;
+ resets = <&rst ASPEED_RESET_I2C>;
+#if 0
+ new-mode;
+#endif
+ };
+
+ i2c0: i2c@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80 0x80 0xC00 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x100 0x80 0xC20 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x180 0x80 0xC40 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c3: i2c@200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x200 0x40 0xC60 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c4: i2c@280 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x280 0x80 0xC80 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c5: i2c@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x300 0x40 0xCA0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c6: i2c@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x380 0x80 0xCC0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c7: i2c@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x400 0x80 0xCE0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c8: i2c@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x480 0x80 0xD00 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ };
+
+ i2c9: i2c@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x500 0x80 0xD20 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@580 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x580 0x80 0xD40 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x600 0x80 0xD60 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@680 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x680 0x80 0xD80 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x700 0x80 0xDA0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@780 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x780 0x80 0xDC0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x800 0x80 0xDE0 0x20>;
+ compatible = "aspeed,ast2600-i2c-bus";
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu ASPEED_CLK_APB2>;
+ status = "disabled";
+ };
+
+};
+
+&pinctrl {
+ pinctrl_fmcquad_default: fmcquad_default {
+ function = "FMCQUAD";
+ groups = "FMCQUAD";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1abr_default: spi1abr_default {
+ function = "SPI1ABR";
+ groups = "SPI1ABR";
+ };
+
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
+
+ pinctrl_spi1wp_default: spi1wp_default {
+ function = "SPI1WP";
+ groups = "SPI1WP";
+ };
+
+ pinctrl_spi1quad_default: spi1quad_default {
+ function = "SPI1QUAD";
+ groups = "SPI1QUAD";
+ };
+
+ pinctrl_spi2_default: spi2_default {
+ function = "SPI2";
+ groups = "SPI2";
+ };
+
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
+
+ pinctrl_spi2cs2_default: spi2cs2_default {
+ function = "SPI2CS2";
+ groups = "SPI2CS2";
+ };
+
+ pinctrl_spi2quad_default: spi2quad_default {
+ function = "SPI2QUAD";
+ groups = "SPI2QUAD";
+ };
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_espi_default: espi_default {
+ function = "ESPI";
+ groups = "ESPI";
+ };
+
+ pinctrl_fsi1_default: fsi1_default {
+ function = "FSI1";
+ groups = "FSI1";
+ };
+
+ pinctrl_fsi2_default: fsi2_default {
+ function = "FSI2";
+ groups = "FSI2";
+ };
+
+ pinctrl_fwspics1_default: fwspics1_default {
+ function = "FWSPICS1";
+ groups = "FWSPICS1";
+ };
+
+ pinctrl_fwspics2_default: fwspics2_default {
+ function = "FWSPICS2";
+ groups = "FWSPICS2";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ function = "I2C1";
+ groups = "I2C1";
+ };
+ pinctrl_i2c2_default: i2c2_default {
+ function = "I2C2";
+ groups = "I2C2";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c15_default: i2c15_default {
+ function = "I2C15";
+ groups = "I2C15";
+ };
+
+ pinctrl_i2c16_default: i2c16_default {
+ function = "I2C16";
+ groups = "I2C16";
+ };
+
+ pinctrl_lad0_default: lad0_default {
+ function = "LAD0";
+ groups = "LAD0";
+ };
+
+ pinctrl_lad1_default: lad1_default {
+ function = "LAD1";
+ groups = "LAD1";
+ };
+
+ pinctrl_lad2_default: lad2_default {
+ function = "LAD2";
+ groups = "LAD2";
+ };
+
+ pinctrl_lad3_default: lad3_default {
+ function = "LAD3";
+ groups = "LAD3";
+ };
+
+ pinctrl_lclk_default: lclk_default {
+ function = "LCLK";
+ groups = "LCLK";
+ };
+
+ pinctrl_lframe_default: lframe_default {
+ function = "LFRAME";
+ groups = "LFRAME";
+ };
+
+ pinctrl_lpchc_default: lpchc_default {
+ function = "LPCHC";
+ groups = "LPCHC";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcplus_default: lpcplus_default {
+ function = "LPCPLUS";
+ groups = "LPCPLUS";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_lsirq_default: lsirq_default {
+ function = "LSIRQ";
+ groups = "LSIRQ";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mac3link_default: mac3link_default {
+ function = "MAC3LINK";
+ groups = "MAC3LINK";
+ };
+
+ pinctrl_mac4link_default: mac4link_default {
+ function = "MAC4LINK";
+ groups = "MAC4LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_mdio3_default: mdio3_default {
+ function = "MDIO3";
+ groups = "MDIO3";
+ };
+
+ pinctrl_mdio4_default: mdio4_default {
+ function = "MDIO4";
+ groups = "MDIO4";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rmii3_default: rmii3_default {
+ function = "RMII3";
+ groups = "RMII3";
+ };
+
+ pinctrl_rmii4_default: rmii4_default {
+ function = "RMII4";
+ groups = "RMII4";
+ };
+
+ pinctrl_rmii1rclk_default: rmii1rclk_default {
+ function = "RMII1RCLK";
+ groups = "RMII1RCLK";
+ };
+
+ pinctrl_rmii2rclk_default: rmii2rclk_default {
+ function = "RMII2RCLK";
+ groups = "RMII2RCLK";
+ };
+
+ pinctrl_rmii3rclk_default: rmii3rclk_default {
+ function = "RMII3RCLK";
+ groups = "RMII3RCLK";
+ };
+
+ pinctrl_rmii4rclk_default: rmii4rclk_default {
+ function = "RMII4RCLK";
+ groups = "RMII4RCLK";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_nrts4_default: nrts4_default {
+ function = "NRTS4";
+ groups = "NRTS4";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pewake_default: pewake_default {
+ function = "PEWAKE";
+ groups = "PEWAKE";
+ };
+
+ pinctrl_pnor_default: pnor_default {
+ function = "PNOR";
+ groups = "PNOR";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rgmii3_default: rgmii3_default {
+ function = "RGMII3";
+ groups = "RGMII3";
+ };
+
+ pinctrl_rgmii4_default: rgmii4_default {
+ function = "RGMII4";
+ groups = "RGMII4";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt10_default: salt10_default {
+ function = "SALT10";
+ groups = "SALT10";
+ };
+
+ pinctrl_salt11_default: salt11_default {
+ function = "SALT11";
+ groups = "SALT11";
+ };
+
+ pinctrl_salt12_default: salt12_default {
+ function = "SALT12";
+ groups = "SALT12";
+ };
+
+ pinctrl_salt13_default: salt13_default {
+ function = "SALT13";
+ groups = "SALT13";
+ };
+
+ pinctrl_salt14_default: salt14_default {
+ function = "SALT14";
+ groups = "SALT14";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_salt5_default: salt5_default {
+ function = "SALT5";
+ groups = "SALT5";
+ };
+
+ pinctrl_salt6_default: salt6_default {
+ function = "SALT6";
+ groups = "SALT6";
+ };
+
+ pinctrl_salt7_default: salt7_default {
+ function = "SALT7";
+ groups = "SALT7";
+ };
+
+ pinctrl_salt8_default: salt8_default {
+ function = "SALT8";
+ groups = "SALT8";
+ };
+
+ pinctrl_salt9_default: salt9_default {
+ function = "SALT9";
+ groups = "SALT9";
+ };
+
+ pinctrl_scl1_default: scl1_default {
+ function = "SCL1";
+ groups = "SCL1";
+ };
+
+ pinctrl_scl2_default: scl2_default {
+ function = "SCL2";
+ groups = "SCL2";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_emmc_default: emmc_default {
+ function = "EMMC";
+ groups = "EMMC";
+ };
+
+ pinctrl_emmcg8_default: emmcg8_default {
+ function = "EMMCG8";
+ groups = "EMMCG8";
+ };
+
+ pinctrl_sda1_default: sda1_default {
+ function = "SDA1";
+ groups = "SDA1";
+ };
+
+ pinctrl_sda2_default: sda2_default {
+ function = "SDA2";
+ groups = "SDA2";
+ };
+
+ pinctrl_sgps1_default: sgps1_default {
+ function = "SGPS1";
+ groups = "SGPS1";
+ };
+
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spi2ck_default: spi2ck_default {
+ function = "SPI2CK";
+ groups = "SPI2CK";
+ };
+
+ pinctrl_spi2cs0_default: spi2cs0_default {
+ function = "SPI2CS0";
+ groups = "SPI2CS0";
+ };
+
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
+
+ pinctrl_spi2miso_default: spi2miso_default {
+ function = "SPI2MISO";
+ groups = "SPI2MISO";
+ };
+
+ pinctrl_spi2mosi_default: spi2mosi_default {
+ function = "SPI2MOSI";
+ groups = "SPI2MOSI";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_usb2ah_default: usb2ah_default {
+ function = "USB2AH";
+ groups = "USB2AH";
+ };
+
+ pinctrl_usb11bhid_default: usb11bhid_default {
+ function = "USB11BHID";
+ groups = "USB11BHID";
+ };
+
+ pinctrl_usb2bh_default: usb2bh_default {
+ function = "USB2BH";
+ groups = "USB2BH";
+ };
+
+ pinctrl_vgabiosrom_default: vgabiosrom_default {
+ function = "VGABIOSROM";
+ groups = "VGABIOSROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpo_default: vpo_default {
+ function = "VPO";
+ groups = "VPO";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ pinctrl_pcie0rc_default: pcie0rc_default {
+ function = "PCIE0RC";
+ groups = "PCIE0RC";
+ };
+
+ pinctrl_pcie1rc_default: pcie1rc_default {
+ function = "PCIE1RC";
+ groups = "PCIE1RC";
+ };
+};
diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index eef433e..0ab52fd 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -52,6 +52,20 @@
clock-frequency = <400000>;
};
+ nand: nand-controller@f4324000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cortina,ca-nand";
+ reg = <0 0xf4324000 0x3b0>, /* NAND controller */
+ <0 0xf7001000 0xb4>, /* DMA_GLOBAL */
+ <0 0xf7001a00 0x80>; /* DMA channel0 for FLASH */
+ status = "okay";
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <16>;
+ nand-ecc-step-size = <1024>; /* Must be 1024 */
+ nand_flash_base_addr = <0xe0000000>;
+ };
+
sflash: sflash-controller@f4324000 {
#address-cells = <2>;
#size-cells = <1>;
diff --git a/arch/arm/dts/mt7622.dtsi b/arch/arm/dts/mt7622.dtsi
index d888545..5c2e025 100644
--- a/arch/arm/dts/mt7622.dtsi
+++ b/arch/arm/dts/mt7622.dtsi
@@ -71,16 +71,10 @@
compatible = "mediatek,timer";
reg = <0x10004000 0x80>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&system_clk>;
+ clocks = <&infracfg CLK_INFRA_APXGPT_PD>;
clock-names = "system-clk";
};
- system_clk: dummy13m {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- #clock-cells = <0>;
- };
-
infracfg: infracfg@10000000 {
compatible = "mediatek,mt7622-infracfg",
"syscon";
diff --git a/arch/arm/dts/mt8516-pumpkin.dts b/arch/arm/dts/mt8516-pumpkin.dts
index cd43c1f..292b00f 100644
--- a/arch/arm/dts/mt8516-pumpkin.dts
+++ b/arch/arm/dts/mt8516-pumpkin.dts
@@ -108,3 +108,13 @@
&watchdog {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+
+ usb_con_c: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ };
+};
diff --git a/arch/arm/dts/mt8516.dtsi b/arch/arm/dts/mt8516.dtsi
index 1c33582..c4577ce 100644
--- a/arch/arm/dts/mt8516.dtsi
+++ b/arch/arm/dts/mt8516.dtsi
@@ -123,6 +123,20 @@
status = "disabled";
};
+ usb0: usb@11100000 {
+ compatible = "mediatek,mt8516-musb",
+ "mediatek,mt8518-musb";
+ reg = <0x11100000 0x1000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "mc";
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>,
+ <&topckgen_cg CLK_TOP_USBIF>,
+ <&topckgen_cg CLK_TOP_USB>,
+ <&topckgen_cg CLK_TOP_USB_1P>;
+ clock-names = "usbpll", "usbmcu", "usb", "icusb";
+ status = "disabled";
+ };
+
uart0: serial@11005000 {
compatible = "mediatek,hsuart";
reg = <0x11005000 0x1000>;
diff --git a/arch/arm/include/asm/acpi_table.h b/arch/arm/include/asm/acpi_table.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/arm/include/asm/acpi_table.h
diff --git a/arch/arm/include/asm/arch-aspeed/boot0.h b/arch/arm/include/asm/arch-aspeed/boot0.h
new file mode 100644
index 0000000..368becc
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/boot0.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_BOOT0_H
+#define _ASM_ARCH_BOOT0_H
+
+_start:
+ ARM_VECTORS
+
+ .word 0x0 /* key location */
+ .word 0x0 /* start address of image */
+ .word 0xfc00 /* maximum image size: 63KB */
+ .word 0x0 /* signature address */
+ .word 0x0 /* header revision ID low */
+ .word 0x0 /* header revision ID high */
+ .word 0x0 /* reserved */
+ .word 0x0 /* checksum */
+ .word 0x0 /* BL2 secure header */
+ .word 0x0 /* public key or digest offset for BL2 */
+
+#endif
diff --git a/arch/arm/include/asm/arch-aspeed/platform.h b/arch/arm/include/asm/arch-aspeed/platform.h
index 6cee036..d50ec5f 100644
--- a/arch/arm/include/asm/arch-aspeed/platform.h
+++ b/arch/arm/include/asm/arch-aspeed/platform.h
@@ -13,6 +13,11 @@
#define ASPEED_DRAM_BASE 0x80000000
#define ASPEED_SRAM_BASE 0x1e720000
#define ASPEED_SRAM_SIZE 0x9000
+#elif defined(CONFIG_ASPEED_AST2600)
+#define ASPEED_MAC_COUNT 4
+#define ASPEED_DRAM_BASE 0x80000000
+#define ASPEED_SRAM_BASE 0x10000000
+#define ASPEED_SRAM_SIZE 0x10000
#else
#err "Unrecognized Aspeed platform."
#endif
diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2600.h b/arch/arm/include/asm/arch-aspeed/scu_ast2600.h
new file mode 100644
index 0000000..a205fb1
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/scu_ast2600.h
@@ -0,0 +1,338 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef _ASM_ARCH_SCU_AST2600_H
+#define _ASM_ARCH_SCU_AST2600_H
+
+#define SCU_UNLOCK_KEY 0x1688a8a8
+
+#define SCU_CLKGATE1_EMMC BIT(27)
+#define SCU_CLKGATE1_MAC2 BIT(21)
+#define SCU_CLKGATE1_MAC1 BIT(20)
+#define SCU_CLKGATE1_USB_HUB BIT(14)
+#define SCU_CLKGATE1_USB_HOST2 BIT(7)
+
+#define SCU_CLKGATE2_FSI BIT(30)
+#define SCU_CLKGATE2_MAC4 BIT(21)
+#define SCU_CLKGATE2_MAC3 BIT(20)
+#define SCU_CLKGATE2_SDIO BIT(4)
+
+#define SCU_DRAM_HDSHK_SOC_INIT BIT(7)
+#define SCU_DRAM_HDSHK_RDY BIT(6)
+
+#define SCU_CLKSRC1_ECC_RSA_DIV_MASK GENMASK(27, 26)
+#define SCU_CLKSRC1_ECC_RSA_DIV_SHIFT 26
+#define SCU_CLKSRC1_PCLK_DIV_MASK GENMASK(25, 23)
+#define SCU_CLKSRC1_PCLK_DIV_SHIFT 23
+#define SCU_CLKSRC1_BCLK_DIV_MASK GENMASK(22, 20)
+#define SCU_CLKSRC1_BCLK_DIV_SHIFT 20
+#define SCU_CLKSRC1_ECC_RSA BIT(19)
+#define SCU_CLKSRC1_MAC_DIV_MASK GENMASK(18, 16)
+#define SCU_CLKSRC1_MAC_DIV_SHIFT 16
+#define SCU_CLKSRC1_EMMC_EN BIT(15)
+#define SCU_CLKSRC1_EMMC_DIV_MASK GENMASK(14, 12)
+#define SCU_CLKSRC1_EMMC_DIV_SHIFT 12
+#define SCU_CLKSRC1_EMMC BIT(11)
+
+#define SCU_CLKSRC2_RMII12 BIT(19)
+#define SCU_CLKSRC2_RMII12_DIV_MASK GENMASK(18, 16)
+#define SCU_CLKSRC2_RMII12_DIV_SHIFT 16
+#define SCU_CLKSRC2_UART5 BIT(14)
+
+#define SCU_CLKSRC4_SDIO_EN BIT(31)
+#define SCU_CLKSRC4_SDIO_DIV_MASK GENMASK(30, 28)
+#define SCU_CLKSRC4_SDIO_DIV_SHIFT 28
+#define SCU_CLKSRC4_MAC_DIV_MASK GENMASK(26, 24)
+#define SCU_CLKSRC4_MAC_DIV_SHIFT 24
+#define SCU_CLKSRC4_RMII34_DIV_MASK GENMASK(18, 16)
+#define SCU_CLKSRC4_RMII34_DIV_SHIFT 16
+#define SCU_CLKSRC4_PCLK_DIV_MASK GENMASK(11, 9)
+#define SCU_CLKSRC4_PCLK_DIV_SHIFT 9
+#define SCU_CLKSRC4_SDIO BIT(8)
+#define SCU_CLKSRC4_UART6 BIT(5)
+#define SCU_CLKSRC4_UART4 BIT(3)
+#define SCU_CLKSRC4_UART3 BIT(2)
+#define SCU_CLKSRC4_UART2 BIT(1)
+#define SCU_CLKSRC4_UART1 BIT(0)
+
+#define SCU_CLKSRC5_UART13 BIT(12)
+#define SCU_CLKSRC5_UART12 BIT(11)
+#define SCU_CLKSRC5_UART11 BIT(10)
+#define SCU_CLKSRC5_UART10 BIT(9)
+#define SCU_CLKSRC5_UART9 BIT(8)
+#define SCU_CLKSRC5_UART8 BIT(7)
+#define SCU_CLKSRC5_UART7 BIT(6)
+#define SCU_CLKSRC5_HUXCLK_MASK GENMASK(5, 3)
+#define SCU_CLKSRC5_HUXCLK_SHIFT 3
+#define SCU_CLKSRC5_UXCLK_MASK GENMASK(2, 0)
+#define SCU_CLKSRC5_UXCLK_SHIFT 0
+
+#define SCU_PINCTRL1_EMMC_MASK GENMASK(31, 24)
+#define SCU_PINCTRL1_EMMC_SHIFT 24
+
+#define SCU_PINCTRL16_MAC4_DRIVING_MASK GENMASK(3, 2)
+#define SCU_PINCTRL16_MAC4_DRIVING_SHIFT 2
+#define SCU_PINCTRL16_MAC3_DRIVING_MASK GENMASK(1, 0)
+#define SCU_PINCTRL16_MAC3_DRIVING_SHIFT 0
+
+#define SCU_HWSTRAP1_CPU_AXI_CLK_RATIO BIT(16)
+#define SCU_HWSTRAP1_VGA_MEM_MASK GENMASK(14, 13)
+#define SCU_HWSTRAP1_VGA_MEM_SHIFT 13
+#define SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_MASK GENMASK(12, 11)
+#define SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_SHIFT 11
+#define SCU_HWSTRAP1_CPU_FREQ_MASK GENMASK(10, 8)
+#define SCU_HWSTRAP1_CPU_FREQ_SHIFT 8
+#define SCU_HWSTRAP1_MAC2_INTF BIT(7)
+#define SCU_HWSTRAP1_MAC1_INTF BIT(6)
+
+#define SCU_EFUSE_DIS_DP BIT(17)
+#define SCU_EFUSE_DIS_VGA BIT(14)
+#define SCU_EFUSE_DIS_PCIE_EP BIT(13)
+#define SCU_EFUSE_DIS_USB BIT(12)
+#define SCU_EFUSE_DIS_RVAS BIT(10)
+#define SCU_EFUSE_DIS_VIDEO_DEC BIT(9)
+#define SCU_EFUSE_DIS_VIDEO BIT(8)
+#define SCU_EFUSE_DIS_PCIE_RC BIT(7)
+#define SCU_EFUSE_DIS_CM3 BIT(6)
+#define SCU_EFUSE_DIS_CA7 BIT(5)
+
+#define SCU_PLL_RST BIT(25)
+#define SCU_PLL_BYPASS BIT(24)
+#define SCU_PLL_OFF BIT(23)
+#define SCU_PLL_DIV_MASK GENMASK(22, 19)
+#define SCU_PLL_DIV_SHIFT 19
+#define SCU_PLL_DENUM_MASK GENMASK(18, 13)
+#define SCU_PLL_DENUM_SHIFT 13
+#define SCU_PLL_NUM_MASK GENMASK(12, 0)
+#define SCU_PLL_NUM_SHIFT 0
+
+#define SCU_UART_CLKGEN_N_MASK GENMASK(17, 8)
+#define SCU_UART_CLKGEN_N_SHIFT 8
+#define SCU_UART_CLKGEN_R_MASK GENMASK(7, 0)
+#define SCU_UART_CLKGEN_R_SHIFT 0
+
+#define SCU_HUART_CLKGEN_N_MASK GENMASK(17, 8)
+#define SCU_HUART_CLKGEN_N_SHIFT 8
+#define SCU_HUART_CLKGEN_R_MASK GENMASK(7, 0)
+#define SCU_HUART_CLKGEN_R_SHIFT 0
+
+#define SCU_MISC_CTRL1_UART5_DIV BIT(12)
+
+#ifndef __ASSEMBLY__
+struct ast2600_scu {
+ uint32_t prot_key1; /* 0x000 */
+ uint32_t chip_id1; /* 0x004 */
+ uint32_t rsv_0x08; /* 0x008 */
+ uint32_t rsv_0x0c; /* 0x00C */
+ uint32_t prot_key2; /* 0x010 */
+ uint32_t chip_id2; /* 0x014 */
+ uint32_t rsv_0x18[10]; /* 0x018 ~ 0x03C */
+ uint32_t modrst_ctrl1; /* 0x040 */
+ uint32_t modrst_clr1; /* 0x044 */
+ uint32_t rsv_0x48; /* 0x048 */
+ uint32_t rsv_0x4C; /* 0x04C */
+ uint32_t modrst_ctrl2; /* 0x050 */
+ uint32_t modrst_clr2; /* 0x054 */
+ uint32_t rsv_0x58; /* 0x058 */
+ uint32_t rsv_0x5C; /* 0x05C */
+ uint32_t extrst_sel1; /* 0x060 */
+ uint32_t sysrst_sts1_1; /* 0x064 */
+ uint32_t sysrst_sts1_2; /* 0x068 */
+ uint32_t sysrst_sts1_3; /* 0x06C */
+ uint32_t extrst_sel2; /* 0x070 */
+ uint32_t sysrst_sts2_1; /* 0x074 */
+ uint32_t sysrst_sts2_2; /* 0x078 */
+ uint32_t stsrst_sts3_2; /* 0x07C */
+ uint32_t clkgate_ctrl1; /* 0x080 */
+ uint32_t clkgate_clr1; /* 0x084 */
+ uint32_t rsv_0x88; /* 0x088 */
+ uint32_t rsv_0x8C; /* 0x08C */
+ uint32_t clkgate_ctrl2; /* 0x090 */
+ uint32_t clkgate_clr2; /* 0x094 */
+ uint32_t rsv_0x98[10]; /* 0x098 ~ 0x0BC */
+ uint32_t misc_ctrl1; /* 0x0C0 */
+ uint32_t misc_ctrl2; /* 0x0C4 */
+ uint32_t debug_ctrl1; /* 0x0C8 */
+ uint32_t rsv_0xCC; /* 0x0CC */
+ uint32_t misc_ctrl3; /* 0x0D0 */
+ uint32_t misc_ctrl4; /* 0x0D4 */
+ uint32_t debug_ctrl2; /* 0x0D8 */
+ uint32_t rsv_0xdc[9]; /* 0x0DC ~ 0x0FC */
+ uint32_t dram_hdshk; /* 0x100 */
+ uint32_t soc_scratch[3]; /* 0x104 ~ 0x10C */
+ uint32_t rsv_0x110[4]; /* 0x110 ~ 0x11C*/
+ uint32_t cpu_scratch_wp; /* 0x120 */
+ uint32_t rsv_0x124[23]; /* 0x124 */
+ uint32_t smp_boot[12]; /* 0x180 */
+ uint32_t cpu_scratch[20]; /* 0x1b0 */
+ uint32_t hpll; /* 0x200 */
+ uint32_t hpll_ext; /* 0x204 */
+ uint32_t rsv_0x208[2]; /* 0x208 ~ 0x20C */
+ uint32_t apll; /* 0x210 */
+ uint32_t apll_ext; /* 0x214 */
+ uint32_t rsv_0x218[2]; /* 0x218 ~ 0x21C */
+ uint32_t mpll; /* 0x220 */
+ uint32_t mpll_ext; /* 0x224 */
+ uint32_t rsv_0x228[6]; /* 0x228 ~ 0x23C */
+ uint32_t epll; /* 0x240 */
+ uint32_t epll_ext; /* 0x244 */
+ uint32_t rsv_0x248[6]; /* 0x248 ~ 0x25C */
+ uint32_t dpll; /* 0x260 */
+ uint32_t dpll_ext; /* 0x264 */
+ uint32_t rsv_0x268[38]; /* 0x268 ~ 0x2FC */
+ uint32_t clksrc1; /* 0x300 */
+ uint32_t clksrc2; /* 0x304 */
+ uint32_t clksrc3; /* 0x308 */
+ uint32_t rsv_0x30c; /* 0x30C */
+ uint32_t clksrc4; /* 0x310 */
+ uint32_t clksrc5; /* 0x314 */
+ uint32_t rsv_0x318[2]; /* 0x318 ~ 0x31C */
+ uint32_t freq_counter_ctrl1; /* 0x320 */
+ uint32_t freq_counter_cmp1; /* 0x324 */
+ uint32_t rsv_0x328[2]; /* 0x328 ~ 0x32C */
+ uint32_t freq_counter_ctrl2; /* 0x330 */
+ uint32_t freq_counter_cmp2; /* 0x334 */
+ uint32_t uart_clkgen; /* 0x338 */
+ uint32_t huart_clkgen; /* 0x33C */
+ uint32_t mac12_clk_delay; /* 0x340 */
+ uint32_t rsv_0x344; /* 0x344 */
+ uint32_t mac12_clk_delay_100M; /* 0x348 */
+ uint32_t mac12_clk_delay_10M; /* 0x34C */
+ uint32_t mac34_clk_delay; /* 0x350 */
+ uint32_t rsv_0x354; /* 0x354 */
+ uint32_t mac34_clk_delay_100M; /* 0x358 */
+ uint32_t mac34_clk_delay_10M; /* 0x35C */
+ uint32_t clkduty_meas_ctrl; /* 0x360 */
+ uint32_t clkduty1; /* 0x364 */
+ uint32_t clkduty2; /* 0x368 */
+ uint32_t clkduty_meas_res; /* 0x36C */
+ uint32_t clkduty_meas_ctrl2; /* 0x370 */
+ uint32_t clkduty3; /* 0x374 */
+ uint32_t rsv_0x378[34]; /* 0x378 ~ 0x3FC */
+ uint32_t pinmux1; /* 0x400 */
+ uint32_t pinmux2; /* 0x404 */
+ uint32_t rsv_0x408; /* 0x408 */
+ uint32_t pinmux3; /* 0x40C */
+ uint32_t pinmux4; /* 0x410 */
+ uint32_t pinmux5; /* 0x414 */
+ uint32_t pinmux6; /* 0x418 */
+ uint32_t pinmux7; /* 0x41C */
+ uint32_t rsv_0x420[4]; /* 0x420 ~ 0x42C */
+ uint32_t pinmux8; /* 0x430 */
+ uint32_t pinmux9; /* 0x434 */
+ uint32_t pinmux10; /* 0x438 */
+ uint32_t rsv_0x43c; /* 0x43C */
+ uint32_t pinmux12; /* 0x440 */
+ uint32_t pinmux13; /* 0x444 */
+ uint32_t rsv_0x448[2]; /* 0x448 ~ 0x44C */
+ uint32_t pinmux14; /* 0x450 */
+ uint32_t pinmux15; /* 0x454 */
+ uint32_t pinmux16; /* 0x458 */
+ uint32_t rsv_0x45c[21]; /* 0x45C ~ 0x4AC */
+ uint32_t pinmux17; /* 0x4B0 */
+ uint32_t pinmux18; /* 0x4B4 */
+ uint32_t pinmux19; /* 0x4B8 */
+ uint32_t pinmux20; /* 0x4BC */
+ uint32_t rsv_0x4c0[5]; /* 0x4C0 ~ 0x4D0 */
+ uint32_t pinmux22; /* 0x4D4 */
+ uint32_t pinmux23; /* 0x4D8 */
+ uint32_t rsv_0x4dc[9]; /* 0x4DC ~ 0x4FC */
+ uint32_t hwstrap1; /* 0x500 */
+ uint32_t hwstrap_clr1; /* 0x504 */
+ uint32_t hwstrap_prot1; /* 0x508 */
+ uint32_t rsv_0x50c; /* 0x50C */
+ uint32_t hwstrap2; /* 0x510 */
+ uint32_t hwstrap_clr2; /* 0x514 */
+ uint32_t hwstrap_prot2; /* 0x518 */
+ uint32_t rsv_0x51c; /* 0x51C */
+ uint32_t rng_ctrl; /* 0x520 */
+ uint32_t rng_data; /* 0x524 */
+ uint32_t rsv_0x528[6]; /* 0x528 ~ 0x53C */
+ uint32_t pwr_save_wakeup_en1; /* 0x540 */
+ uint32_t pwr_save_wakeup_ctrl1; /* 0x544 */
+ uint32_t rsv_0x548[2]; /* 0x548 */
+ uint32_t pwr_save_wakeup_en2; /* 0x550 */
+ uint32_t pwr_save_wakeup_ctrl2; /* 0x554 */
+ uint32_t rsv_0x558[2]; /* 0x558 */
+ uint32_t intr1_ctrl_sts; /* 0x560 */
+ uint32_t rsv_0x564[3]; /* 0x564 */
+ uint32_t intr2_ctrl_sts; /* 0x570 */
+ uint32_t rsv_0x574[7]; /* 0x574 ~ 0x58C */
+ uint32_t otp_ctrl; /* 0x590 */
+ uint32_t efuse; /* 0x594 */
+ uint32_t rsv_0x598[6]; /* 0x598 */
+ uint32_t chip_unique_id[8]; /* 0x5B0 */
+ uint32_t rsv_0x5e0[8]; /* 0x5E0 ~ 0x5FC */
+ uint32_t disgpio_in_pull_down0; /* 0x610 */
+ uint32_t disgpio_in_pull_down1; /* 0x614 */
+ uint32_t disgpio_in_pull_down2; /* 0x618 */
+ uint32_t disgpio_in_pull_down3; /* 0x61C */
+ uint32_t rsv_0x620[4]; /* 0x620 ~ 0x62C */
+ uint32_t disgpio_in_pull_down4; /* 0x630 */
+ uint32_t disgpio_in_pull_down5; /* 0x634 */
+ uint32_t disgpio_in_pull_down6; /* 0x638 */
+ uint32_t rsv_0x63c[5]; /* 0x63C ~ 0x64C */
+ uint32_t sli_driving_strength; /* 0x650 */
+ uint32_t rsv_0x654[107]; /* 0x654 ~ 0x7FC */
+ uint32_t ca7_ctrl1; /* 0x800 */
+ uint32_t ca7_ctrl2; /* 0x804 */
+ uint32_t ca7_ctrl3; /* 0x808 */
+ uint32_t ca7_ctrl4; /* 0x80C */
+ uint32_t rsv_0x810[4]; /* 0x810 ~ 0x81C */
+ uint32_t ca7_parity_chk; /* 0x820 */
+ uint32_t ca7_parity_clr; /* 0x824 */
+ uint32_t rsv_0x828[118]; /* 0x828 ~ 0x9FC */
+ uint32_t cm3_ctrl; /* 0xA00 */
+ uint32_t cm3_base; /* 0xA04 */
+ uint32_t cm3_imem_addr; /* 0xA08 */
+ uint32_t cm3_dmem_addr; /* 0xA0C */
+ uint32_t rsv_0xa10[12]; /* 0xA10 ~ 0xA3C */
+ uint32_t cm3_cache_area; /* 0xA40 */
+ uint32_t cm3_cache_invd_ctrl; /* 0xA44 */
+ uint32_t cm3_cache_func_ctrl; /* 0xA48 */
+ uint32_t rsv_0xa4c[108]; /* 0xA4C ~ 0xBFC */
+ uint32_t pci_cfg[3]; /* 0xC00 */
+ uint32_t rsv_0xc0c[5]; /* 0xC0C ~ 0xC1C */
+ uint32_t pcie_cfg; /* 0xC20 */
+ uint32_t mmio_decode; /* 0xC24 */
+ uint32_t reloc_ctrl_decode[2]; /* 0xC28 */
+ uint32_t rsv_0xc30[4]; /* 0xC30 ~ 0xC3C */
+ uint32_t mbox_decode; /* 0xC40 */
+ uint32_t shared_sram_decode[2]; /* 0xC44 */
+ uint32_t bmc_rev_id; /* 0xC4C */
+ uint32_t rsv_0xc50[5]; /* 0xC50 ~ 0xC60 */
+ uint32_t bmc_device_id; /* 0xC64 */
+ uint32_t rsv_0xc68[102]; /* 0xC68 ~ 0xDFC */
+ uint32_t vga_scratch1; /* 0xE00 */
+ uint32_t vga_scratch2; /* 0xE04 */
+ uint32_t vga_scratch3; /* 0xE08 */
+ uint32_t vga_scratch4; /* 0xE0C */
+ uint32_t rsv_0xe10[4]; /* 0xE10 ~ 0xE1C */
+ uint32_t vga_scratch5; /* 0xE20 */
+ uint32_t vga_scratch6; /* 0xE24 */
+ uint32_t vga_scratch7; /* 0xE28 */
+ uint32_t vga_scratch8; /* 0xE2C */
+ uint32_t rsv_0xe30[52]; /* 0xE30 ~ 0xEFC */
+ uint32_t wr_prot1; /* 0xF00 */
+ uint32_t wr_prot2; /* 0xF04 */
+ uint32_t wr_prot3; /* 0xF08 */
+ uint32_t wr_prot4; /* 0xF0C */
+ uint32_t wr_prot5; /* 0xF10 */
+ uint32_t wr_prot6; /* 0xF18 */
+ uint32_t wr_prot7; /* 0xF1C */
+ uint32_t wr_prot8; /* 0xF20 */
+ uint32_t wr_prot9; /* 0xF24 */
+ uint32_t rsv_0xf28[2]; /* 0xF28 ~ 0xF2C */
+ uint32_t wr_prot10; /* 0xF30 */
+ uint32_t wr_prot11; /* 0xF34 */
+ uint32_t wr_prot12; /* 0xF38 */
+ uint32_t wr_prot13; /* 0xF3C */
+ uint32_t wr_prot14; /* 0xF40 */
+ uint32_t rsv_0xf44; /* 0xF44 */
+ uint32_t wr_prot15; /* 0xF48 */
+ uint32_t rsv_0xf4c[5]; /* 0xF4C ~ 0xF5C */
+ uint32_t wr_prot16; /* 0xF60 */
+};
+#endif
+#endif
diff --git a/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h b/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h
new file mode 100644
index 0000000..d2408c0
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef _ASM_ARCH_SDRAM_AST2600_H
+#define _ASM_ARCH_SDRAM_AST2600_H
+
+/* keys for unlocking HW */
+#define SDRAM_UNLOCK_KEY 0xFC600309
+#define SDRAM_VIDEO_UNLOCK_KEY 0x00440003
+
+/* Fixed priority DRAM Requests mask */
+#define REQ_PRI_VGA_HW_CURSOR_R 0
+#define REQ_PRI_VGA_CRT_R 1
+#define REQ_PRI_SOC_DISPLAY_CTRL_R 2
+#define REQ_PRI_PCIE_BUS1_RW 3
+#define REQ_PRI_VIDEO_HIGH_PRI_W 4
+#define REQ_PRI_CPU_RW 5
+#define REQ_PRI_SLI_RW 6
+#define REQ_PRI_PCIE_BUS2_RW 7
+#define REQ_PRI_USB2_0_HUB_EHCI1_DMA_RW 8
+#define REQ_PRI_USB2_0_DEV_EHCI2_DMA_RW 9
+#define REQ_PRI_USB1_1_UHCI_HOST_RW 10
+#define REQ_PRI_AHB_BUS_RW 11
+#define REQ_PRI_CM3_DATA_RW 12
+#define REQ_PRI_CM3_INST_R 13
+#define REQ_PRI_MAC0_DMA_RW 14
+#define REQ_PRI_MAC1_DMA_RW 15
+#define REQ_PRI_SDIO_DMA_RW 16
+#define REQ_PRI_PILOT_ENGINE_RW 17
+#define REQ_PRI_XDMA1_RW 18
+#define REQ_PRI_MCTP1_RW 19
+#define REQ_PRI_VIDEO_FLAG_RW 20
+#define REQ_PRI_VIDEO_LOW_PRI_W 21
+#define REQ_PRI_2D_ENGINE_DATA_RW 22
+#define REQ_PRI_ENC_ENGINE_RW 23
+#define REQ_PRI_MCTP2_RW 24
+#define REQ_PRI_XDMA2_RW 25
+#define REQ_PRI_ECC_RSA_RW 26
+
+#define MCR30_RESET_DLL_DELAY_EN BIT(4)
+#define MCR30_MODE_REG_SEL_SHIFT 1
+#define MCR30_MODE_REG_SEL_MASK GENMASK(3, 1)
+#define MCR30_SET_MODE_REG BIT(0)
+
+#define MCR30_SET_MR(mr) ((mr << MCR30_MODE_REG_SEL_SHIFT) | MCR30_SET_MODE_REG)
+
+#define MCR34_SELF_REFRESH_STATUS_MASK GENMASK(30, 28)
+
+#define MCR34_ODT_DELAY_SHIFT 12
+#define MCR34_ODT_DELAY_MASK GENMASK(15, 12)
+#define MCR34_ODT_EXT_SHIFT 10
+#define MCR34_ODT_EXT_MASK GENMASK(11, 10)
+#define MCR34_ODT_AUTO_ON BIT(9)
+#define MCR34_ODT_EN BIT(8)
+#define MCR34_RESETN_DIS BIT(7)
+#define MCR34_MREQI_DIS BIT(6)
+#define MCR34_MREQ_BYPASS_DIS BIT(5)
+#define MCR34_RGAP_CTRL_EN BIT(4)
+#define MCR34_CKE_OUT_IN_SELF_REF_DIS BIT(3)
+#define MCR34_FOURCE_SELF_REF_EN BIT(2)
+#define MCR34_AUTOPWRDN_EN BIT(1)
+#define MCR34_CKE_EN BIT(0)
+
+#define MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT 16
+#define MCR38_RW_MAX_GRANT_CNT_RQ_MASK GENMASK(20, 16)
+
+/* default request queued limitation mask (0xFFBBFFF4) */
+#define MCR3C_DEFAULT_MASK \
+ ~(REQ_PRI_VGA_HW_CURSOR_R | REQ_PRI_VGA_CRT_R | REQ_PRI_PCIE_BUS1_RW | \
+ REQ_PRI_XDMA1_RW | REQ_PRI_2D_ENGINE_DATA_RW)
+
+#define MCR50_RESET_ALL_INTR BIT(31)
+#define SDRAM_CONF_ECC_AUTO_SCRUBBING BIT(9)
+#define SDRAM_CONF_SCRAMBLE BIT(8)
+#define SDRAM_CONF_ECC_EN BIT(7)
+#define SDRAM_CONF_DUALX8 BIT(5)
+#define SDRAM_CONF_DDR4 BIT(4)
+#define SDRAM_CONF_VGA_SIZE_SHIFT 2
+#define SDRAM_CONF_VGA_SIZE_MASK GENMASK(3, 2)
+#define SDRAM_CONF_CAP_SHIFT 0
+#define SDRAM_CONF_CAP_MASK GENMASK(1, 0)
+
+#define SDRAM_CONF_CAP_256M 0
+#define SDRAM_CONF_CAP_512M 1
+#define SDRAM_CONF_CAP_1024M 2
+#define SDRAM_CONF_CAP_2048M 3
+#define SDRAM_CONF_ECC_SETUP (SDRAM_CONF_ECC_AUTO_SCRUBBING | SDRAM_CONF_ECC_EN)
+
+#define SDRAM_MISC_DDR4_TREFRESH (1 << 3)
+
+#define SDRAM_PHYCTRL0_PLL_LOCKED BIT(4)
+#define SDRAM_PHYCTRL0_NRST BIT(2)
+#define SDRAM_PHYCTRL0_INIT BIT(0)
+
+/* MCR0C */
+#define SDRAM_REFRESH_PERIOD_ZQCS_SHIFT 16
+#define SDRAM_REFRESH_PERIOD_ZQCS_MASK GENMASK(31, 16)
+#define SDRAM_REFRESH_PERIOD_SHIFT 8
+#define SDRAM_REFRESH_PERIOD_MASK GENMASK(15, 8)
+#define SDRAM_REFRESH_ZQCS_EN BIT(7)
+#define SDRAM_RESET_DLL_ZQCL_EN BIT(6)
+#define SDRAM_LOW_PRI_REFRESH_EN BIT(5)
+#define SDRAM_FORCE_PRECHARGE_EN BIT(4)
+#define SDRAM_REFRESH_EN BIT(0)
+
+#define SDRAM_TEST_LEN_SHIFT 4
+#define SDRAM_TEST_LEN_MASK 0xfffff
+#define SDRAM_TEST_START_ADDR_SHIFT 24
+#define SDRAM_TEST_START_ADDR_MASK 0x3f
+
+#define SDRAM_TEST_EN (1 << 0)
+#define SDRAM_TEST_MODE_SHIFT 1
+#define SDRAM_TEST_MODE_MASK (0x3 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_WO (0x0 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_RB (0x1 << SDRAM_TEST_MODE_SHIFT)
+#define SDRAM_TEST_MODE_RW (0x2 << SDRAM_TEST_MODE_SHIFT)
+
+#define SDRAM_TEST_GEN_MODE_SHIFT 3
+#define SDRAM_TEST_GEN_MODE_MASK (7 << SDRAM_TEST_GEN_MODE_SHIFT)
+#define SDRAM_TEST_TWO_MODES (1 << 6)
+#define SDRAM_TEST_ERRSTOP (1 << 7)
+#define SDRAM_TEST_DONE (1 << 12)
+#define SDRAM_TEST_FAIL (1 << 13)
+
+#define SDRAM_AC_TRFC_SHIFT 0
+#define SDRAM_AC_TRFC_MASK 0xff
+
+#define SDRAM_ECC_RANGE_ADDR_MASK GENMASK(30, 20)
+#define SDRAM_ECC_RANGE_ADDR_SHIFT 20
+
+#ifndef __ASSEMBLY__
+struct ast2600_sdrammc_regs {
+ u32 protection_key; /* offset 0x00 */
+ u32 config; /* offset 0x04 */
+ u32 gm_protection_key; /* offset 0x08 */
+ u32 refresh_timing; /* offset 0x0C */
+ u32 ac_timing[4]; /* offset 0x10 ~ 0x1C */
+ u32 mr01_mode_setting; /* offset 0x20 */
+ u32 mr23_mode_setting; /* offset 0x24 */
+ u32 mr45_mode_setting; /* offset 0x28 */
+ u32 mr6_mode_setting; /* offset 0x2C */
+ u32 mode_setting_control; /* offset 0x30 */
+ u32 power_ctrl; /* offset 0x34 */
+ u32 arbitration_ctrl; /* offset 0x38 */
+ u32 req_limit_mask; /* offset 0x3C */
+ u32 max_grant_len[4]; /* offset 0x40 ~ 0x4C */
+ u32 intr_ctrl; /* offset 0x50 */
+ u32 ecc_range_ctrl; /* offset 0x54 */
+ u32 first_ecc_err_addr; /* offset 0x58 */
+ u32 last_ecc_err_addr; /* offset 0x5C */
+ u32 phy_ctrl[4]; /* offset 0x60 ~ 0x6C */
+ u32 ecc_test_ctrl; /* offset 0x70 */
+ u32 test_addr; /* offset 0x74 */
+ u32 test_fail_dq_bit; /* offset 0x78 */
+ u32 test_init_val; /* offset 0x7C */
+ u32 req_input_ctrl; /* offset 0x80 */
+ u32 req_high_pri_ctrl; /* offset 0x84 */
+ u32 reserved0[6]; /* offset 0x88 ~ 0x9C */
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_SDRAM_AST2600_H */
diff --git a/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h b/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
new file mode 100644
index 0000000..96e8ca0
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_WDT_AST2600_H
+#define _ASM_ARCH_WDT_AST2600_H
+
+#define WDT_BASE 0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL 0x4755
+
+/* reset mode */
+#define WDT_RESET_MODE_SOC 0
+#define WDT_RESET_MODE_CHIP 1
+#define WDT_RESET_MODE_CPU 2
+
+/* bit-fields of WDT control register */
+#define WDT_CTRL_2ND_BOOT BIT(7)
+#define WDT_CTRL_RESET_MODE_MASK GENMASK(6, 5)
+#define WDT_CTRL_RESET_MODE_SHIFT 5
+#define WDT_CTRL_CLK1MHZ BIT(4)
+#define WDT_CTRL_RESET BIT(1)
+#define WDT_CTRL_EN BIT(0)
+
+/* bit-fields of WDT reset mask1 register */
+#define WDT_RESET_MASK1_RVAS BIT(25)
+#define WDT_RESET_MASK1_GPIO1 BIT(24)
+#define WDT_RESET_MASK1_XDMA2 BIT(23)
+#define WDT_RESET_MASK1_XDMA1 BIT(22)
+#define WDT_RESET_MASK1_MCTP2 BIT(21)
+#define WDT_RESET_MASK1_MCTP1 BIT(20)
+#define WDT_RESET_MASK1_JTAG1 BIT(19)
+#define WDT_RESET_MASK1_SD_SDIO1 BIT(18)
+#define WDT_RESET_MASK1_MAC2 BIT(17)
+#define WDT_RESET_MASK1_MAC1 BIT(16)
+#define WDT_RESET_MASK1_GPMCU BIT(15)
+#define WDT_RESET_MASK1_DPMCU BIT(14)
+#define WDT_RESET_MASK1_DP BIT(13)
+#define WDT_RESET_MASK1_HAC BIT(12)
+#define WDT_RESET_MASK1_VIDEO BIT(11)
+#define WDT_RESET_MASK1_CRT BIT(10)
+#define WDT_RESET_MASK1_GCRT BIT(9)
+#define WDT_RESET_MASK1_USB11_UHCI BIT(8)
+#define WDT_RESET_MASK1_USB_PORTA BIT(7)
+#define WDT_RESET_MASK1_USB_PORTB BIT(6)
+#define WDT_RESET_MASK1_COPROC BIT(5)
+#define WDT_RESET_MASK1_SOC BIT(4)
+#define WDT_RESET_MASK1_SLI BIT(3)
+#define WDT_RESET_MASK1_AHB BIT(2)
+#define WDT_RESET_MASK1_SDRAM BIT(1)
+#define WDT_RESET_MASK1_ARM BIT(0)
+
+/* bit-fields of WDT reset mask2 register */
+#define WDT_RESET_MASK2_ESPI BIT(26)
+#define WDT_RESET_MASK2_I3C_BUS8 BIT(25)
+#define WDT_RESET_MASK2_I3C_BUS7 BIT(24)
+#define WDT_RESET_MASK2_I3C_BUS6 BIT(23)
+#define WDT_RESET_MASK2_I3C_BUS5 BIT(22)
+#define WDT_RESET_MASK2_I3C_BUS4 BIT(21)
+#define WDT_RESET_MASK2_I3C_BUS3 BIT(20)
+#define WDT_RESET_MASK2_I3C_BUS2 BIT(19)
+#define WDT_RESET_MASK2_I3C_BUS1 BIT(18)
+#define WDT_RESET_MASK2_I3C_GLOBAL BIT(17)
+#define WDT_RESET_MASK2_I2C BIT(16)
+#define WDT_RESET_MASK2_FSI BIT(15)
+#define WDT_RESET_MASK2_ADC BIT(14)
+#define WDT_RESET_MASK2_PWM BIT(13)
+#define WDT_RESET_MASK2_PECI BIT(12)
+#define WDT_RESET_MASK2_LPC BIT(11)
+#define WDT_RESET_MASK2_MDC_MDIO BIT(10)
+#define WDT_RESET_MASK2_GPIO2 BIT(9)
+#define WDT_RESET_MASK2_JTAG2 BIT(8)
+#define WDT_RESET_MASK2_SD_SDIO2 BIT(7)
+#define WDT_RESET_MASK2_MAC4 BIT(6)
+#define WDT_RESET_MASK2_MAC3 BIT(5)
+#define WDT_RESET_MASK2_SOC BIT(4)
+#define WDT_RESET_MASK2_SLI2 BIT(3)
+#define WDT_RESET_MASK2_AHB2 BIT(2)
+#define WDT_RESET_MASK2_SPI1_SPI2 BIT(1)
+#define WDT_RESET_MASK2_ARM BIT(0)
+
+#define WDT_RESET_MASK1_DEFAULT \
+ (WDT_RESET_MASK1_RVAS | WDT_RESET_MASK1_GPIO1 | \
+ WDT_RESET_MASK1_JTAG1 | WDT_RESET_MASK1_SD_SDIO1 | \
+ WDT_RESET_MASK1_MAC2 | WDT_RESET_MASK1_MAC1 | \
+ WDT_RESET_MASK1_HAC | WDT_RESET_MASK1_VIDEO | \
+ WDT_RESET_MASK1_CRT | WDT_RESET_MASK1_GCRT | \
+ WDT_RESET_MASK1_USB11_UHCI | WDT_RESET_MASK1_USB_PORTA | \
+ WDT_RESET_MASK1_USB_PORTB | WDT_RESET_MASK1_COPROC | \
+ WDT_RESET_MASK1_SOC | WDT_RESET_MASK1_ARM)
+
+#define WDT_RESET_MASK2_DEFAULT \
+ (WDT_RESET_MASK2_I3C_BUS8 | WDT_RESET_MASK2_I3C_BUS7 | \
+ WDT_RESET_MASK2_I3C_BUS6 | WDT_RESET_MASK2_I3C_BUS5 | \
+ WDT_RESET_MASK2_I3C_BUS4 | WDT_RESET_MASK2_I3C_BUS3 | \
+ WDT_RESET_MASK2_I3C_BUS2 | WDT_RESET_MASK2_I3C_BUS1 | \
+ WDT_RESET_MASK2_I3C_GLOBAL | WDT_RESET_MASK2_I2C | \
+ WDT_RESET_MASK2_FSI | WDT_RESET_MASK2_ADC | \
+ WDT_RESET_MASK2_PWM | WDT_RESET_MASK2_PECI | \
+ WDT_RESET_MASK2_LPC | WDT_RESET_MASK2_MDC_MDIO | \
+ WDT_RESET_MASK2_GPIO2 | WDT_RESET_MASK2_JTAG2 | \
+ WDT_RESET_MASK2_SD_SDIO2 | WDT_RESET_MASK2_MAC4 | \
+ WDT_RESET_MASK2_MAC3 | WDT_RESET_MASK2_SOC | \
+ WDT_RESET_MASK2_ARM)
+
+#ifndef __ASSEMBLY__
+struct ast2600_wdt {
+ u32 counter_status;
+ u32 counter_reload_val;
+ u32 counter_restart;
+ u32 ctrl;
+ u32 timeout_status;
+ u32 clr_timeout_status;
+ u32 reset_width;
+ u32 reset_mask1;
+ u32 reset_mask2;
+ u32 sw_reset_ctrl;
+ u32 sw_reset_mask1;
+ u32 sw_reset_mask2;
+ u32 sw_reset_disable;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_AST2600_H */
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 6ecb876..7609367 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -3,7 +3,8 @@
!defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
!defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
- !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE)
+ !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE) && \
+ !defined(CONFIG_ARCH_QEMU)
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 4f021ba..9a725f1 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -9,6 +9,11 @@
config SYS_TEXT_BASE
default 0x00000000
+choice
+ prompt "Aspeed SoC select"
+ depends on ARCH_ASPEED
+ default ASPEED_AST2500
+
config ASPEED_AST2500
bool "Support Aspeed AST2500 SoC"
depends on DM_RESET
@@ -18,6 +23,21 @@
It is used as Board Management Controller on many server boards,
which is enabled by support of LPC and eSPI peripherals.
+config ASPEED_AST2600
+ bool "Support Aspeed AST2600 SoC"
+ select CPU_V7A
+ select CPU_V7_HAS_NONSEC
+ select SYS_ARCH_TIMER
+ select SUPPORT_SPL
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ help
+ The Aspeed AST2600 is a ARM-based SoC with Cortex-A7 CPU.
+ It is used as Board Management Controller on many server boards,
+ which is enabled by support of LPC and eSPI peripherals.
+
+endchoice
+
source "arch/arm/mach-aspeed/ast2500/Kconfig"
+source "arch/arm/mach-aspeed/ast2600/Kconfig"
endif
diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile
index 33f65b5..42599c1 100644
--- a/arch/arm/mach-aspeed/Makefile
+++ b/arch/arm/mach-aspeed/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
obj-$(CONFIG_ASPEED_AST2500) += ast2500/
+obj-$(CONFIG_ASPEED_AST2600) += ast2600/
diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig b/arch/arm/mach-aspeed/ast2600/Kconfig
new file mode 100644
index 0000000..f3a5338
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2600/Kconfig
@@ -0,0 +1,17 @@
+if ASPEED_AST2600
+
+config SYS_CPU
+ default "armv7"
+
+config TARGET_EVB_AST2600
+ bool "EVB-AST2600"
+ depends on ASPEED_AST2600
+ help
+ EVB-AST2600 is Aspeed evaluation board for AST2600A0 chip.
+ It has 512M of RAM, 32M of SPI flash, two Ethernet ports,
+ 4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
+ 20 pin JTAG, pinouts for 14 I2Cs, 3 SPIs and eSPI, 8 PWMs.
+
+source "board/aspeed/evb_ast2600/Kconfig"
+
+endif
diff --git a/arch/arm/mach-aspeed/ast2600/Makefile b/arch/arm/mach-aspeed/ast2600/Makefile
new file mode 100644
index 0000000..448d320
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2600/Makefile
@@ -0,0 +1,2 @@
+obj-y += lowlevel_init.o board_common.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/arch/arm/mach-aspeed/ast2600/board_common.c b/arch/arm/mach-aspeed/ast2600/board_common.c
new file mode 100644
index 0000000..a53e163
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2600/board_common.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <dm/uclass.h>
+#include <asm/arch/scu_ast2600.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Memory Control registers */
+#define MCR_BASE 0x1e6e0000
+#define MCR_CONF (MCR_BASE + 0x004)
+
+/* bit fields of MCR_CONF */
+#define MCR_CONF_ECC_EN BIT(7)
+#define MCR_CONF_VGA_MEMSZ_MASK GENMASK(3, 2)
+#define MCR_CONF_VGA_MEMSZ_SHIFT 2
+#define MCR_CONF_MEMSZ_MASK GENMASK(1, 0)
+#define MCR_CONF_MEMSZ_SHIFT 0
+
+int dram_init(void)
+{
+ int ret;
+ struct udevice *dev;
+ struct ram_info ram;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("cannot get DRAM driver\n");
+ return ret;
+ }
+
+ ret = ram_get_info(dev, &ram);
+ if (ret) {
+ debug("cannot get DRAM information\n");
+ return ret;
+ }
+
+ gd->ram_size = ram.size;
+ return 0;
+}
+
+int board_init(void)
+{
+ int i = 0, rc;
+ struct udevice *dev;
+
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ while (1) {
+ rc = uclass_get_device(UCLASS_MISC, i++, &dev);
+ if (rc)
+ break;
+ }
+
+ return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+ int rc;
+ uint32_t conf;
+ uint32_t ecc, act_size, vga_rsvd;
+ struct udevice *scu_dev;
+ struct ast2600_scu *scu;
+
+ rc = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev);
+ if (rc) {
+ debug("%s: cannot find SCU device, rc=%d\n", __func__, rc);
+ return;
+ }
+
+ scu = devfdt_get_addr_ptr(scu_dev);
+ if (IS_ERR_OR_NULL(scu)) {
+ debug("%s: cannot get SCU address pointer\n", __func__);
+ return;
+ }
+
+ conf = readl(MCR_CONF);
+
+ ecc = conf & MCR_CONF_ECC_EN;
+ act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >> MCR_CONF_MEMSZ_SHIFT);
+ vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >> MCR_CONF_VGA_MEMSZ_SHIFT);
+
+ /* no VGA reservation if efuse VGA disable bit is set */
+ if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA)
+ vga_rsvd = 0;
+
+ printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size,
+ vga_rsvd, (ecc) ? "on" : "off");
+}
+
+void enable_caches(void)
+{
+ /* get rid of the warning message */
+}
diff --git a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
new file mode 100644
index 0000000..594963d
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S
@@ -0,0 +1,233 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) ASPEED Technology Inc.
+ */
+#include <config.h>
+#include <asm/armv7.h>
+#include <linux/linkage.h>
+#include <asm/arch/scu_ast2600.h>
+
+/* SCU register offsets */
+#define SCU_BASE 0x1e6e2000
+#define SCU_PROT_KEY1 (SCU_BASE + 0x000)
+#define SCU_PROT_KEY2 (SCU_BASE + 0x010)
+#define SCU_SMP_BOOT (SCU_BASE + 0x180)
+#define SCU_HWSTRAP1 (SCU_BASE + 0x510)
+#define SCU_CA7_PARITY_CHK (SCU_BASE + 0x820)
+#define SCU_CA7_PARITY_CLR (SCU_BASE + 0x824)
+#define SCU_MMIO_DEC (SCU_BASE + 0xc24)
+
+/* FMC SPI register offsets */
+#define FMC_BASE 0x1e620000
+#define FMC_CE0_CTRL (FMC_BASE + 0x010)
+#define FMC_SW_RST_CTRL (FMC_BASE + 0x050)
+#define FMC_WDT1_CTRL_MODE (FMC_BASE + 0x060)
+#define FMC_WDT2_CTRL_MODE (FMC_BASE + 0x064)
+
+/*
+ * The SMP mailbox provides a space with few instructions in it
+ * for secondary cores to execute on and wait for the signal of
+ * SMP core bring up.
+ *
+ * SMP mailbox
+ * +----------------------+
+ * | |
+ * | mailbox insn. for |
+ * | cpuN polling SMP go |
+ * | |
+ * +----------------------+ 0xC
+ * | mailbox ready signal |
+ * +----------------------+ 0x8
+ * | cpuN GO signal |
+ * +----------------------+ 0x4
+ * | cpuN entrypoint |
+ * +----------------------+ SMP_MAILBOX_BASE
+ */
+#define SMP_MBOX_BASE (SCU_SMP_BOOT)
+#define SMP_MBOX_FIELD_ENTRY (SMP_MBOX_BASE + 0x0)
+#define SMP_MBOX_FIELD_GOSIGN (SMP_MBOX_BASE + 0x4)
+#define SMP_MBOX_FIELD_READY (SMP_MBOX_BASE + 0x8)
+#define SMP_MBOX_FIELD_POLLINSN (SMP_MBOX_BASE + 0xc)
+
+.macro scu_unlock
+ movw r0, #(SCU_UNLOCK_KEY & 0xffff)
+ movt r0, #(SCU_UNLOCK_KEY >> 16)
+
+ ldr r1, =SCU_PROT_KEY1
+ str r0, [r1]
+ ldr r1, =SCU_PROT_KEY2
+ str r0, [r1]
+.endm
+
+.macro timer_init
+ ldr r1, =SCU_HWSTRAP1
+ ldr r1, [r1]
+ and r1, #0x700
+ lsr r1, #0x8
+
+ /* 1.2GHz */
+ cmp r1, #0x0
+ movweq r0, #0x8c00
+ movteq r0, #0x4786
+
+ /* 1.6GHz */
+ cmp r1, #0x1
+ movweq r0, #0x1000
+ movteq r0, #0x5f5e
+
+ /* 1.2GHz */
+ cmp r1, #0x2
+ movweq r0, #0x8c00
+ movteq r0, #0x4786
+
+ /* 1.6GHz */
+ cmp r1, #0x3
+ movweq r0, #0x1000
+ movteq r0, #0x5f5e
+
+ /* 800MHz */
+ cmp r1, #0x4
+ movwge r0, #0x0800
+ movtge r0, #0x2faf
+
+ mcr p15, 0, r0, c14, c0, 0 @; update CNTFRQ
+.endm
+
+
+.globl lowlevel_init
+
+lowlevel_init:
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ mov pc, lr
+#else
+ /* setup ARM arch timer frequency */
+ timer_init
+
+ /* reset SMP mailbox as early as possible */
+ mov r0, #0x0
+ ldr r1, =SMP_MBOX_FIELD_READY
+ str r0, [r1]
+
+ /* set ACTLR.SMP to enable cache use */
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, #0x40
+ mcr p15, 0, r0, c1, c0, 1
+
+ /*
+ * we treat cpu0 as the primary core and
+ * put secondary core (cpuN) to sleep
+ */
+ mrc p15, 0, r0, c0, c0, 5 @; Read CPU ID register
+ ands r0, #0xff @; Mask off, leaving the CPU ID field
+ movw r2, #0xab00
+ movt r2, #0xabba
+ orr r2, r0
+
+ beq do_primary_core_setup
+
+ /* hold cpuN until mailbox is ready */
+poll_mailbox_ready:
+ wfe
+ ldr r0, =SMP_MBOX_FIELD_READY
+ ldr r0, [r0]
+ movw r1, #0xcafe
+ movt r1, #0xbabe
+ cmp r1, r0
+ bne poll_mailbox_ready
+
+ /* parameters for relocated SMP go polling insn. */
+ ldr r0, =SMP_MBOX_FIELD_GOSIGN
+ ldr r1, =SMP_MBOX_FIELD_ENTRY
+
+ /* no return */
+ ldr pc, =SMP_MBOX_FIELD_POLLINSN
+
+do_primary_core_setup:
+ scu_unlock
+
+ /* MMIO decode setting */
+ ldr r0, =SCU_MMIO_DEC
+ mov r1, #0x2000
+ str r1, [r0]
+
+ /* enable CA7 cache parity check */
+ mov r0, #0
+ ldr r1, =SCU_CA7_PARITY_CLR
+ str r0, [r1]
+
+ mov r0, #0x1
+ ldr r1, =SCU_CA7_PARITY_CHK
+ str r0, [r1]
+
+ /* do not fill FMC50[1] if boot from eMMC */
+ ldr r0, =SCU_HWSTRAP1
+ ldr r1, [r0]
+ ands r1, #0x04
+ bne skip_fill_wip_bit
+
+ /* fill FMC50[1] for waiting WIP idle */
+ mov r0, #0x02
+ ldr r1, =FMC_SW_RST_CTRL
+ str r0, [r1]
+
+skip_fill_wip_bit:
+ /* disable FMC WDT for SPI address mode detection */
+ mov r0, #0
+ ldr r1, =FMC_WDT1_CTRL_MODE
+ str r0, [r1]
+
+ /* relocate mailbox insn. for cpuN polling SMP go signal */
+ adrl r0, mailbox_insn
+ adrl r1, mailbox_insn_end
+
+ ldr r2, =#SMP_MBOX_FIELD_POLLINSN
+
+relocate_mailbox_insn:
+ ldr r3, [r0], #0x4
+ str r3, [r2], #0x4
+ cmp r0, r1
+ bne relocate_mailbox_insn
+
+ /* reset SMP go sign */
+ mov r0, #0
+ ldr r1, =SMP_MBOX_FIELD_GOSIGN
+ str r0, [r1]
+
+ /* notify cpuN mailbox is ready */
+ movw r0, #0xCAFE
+ movt r0, #0xBABE
+ ldr r1, =SMP_MBOX_FIELD_READY
+ str r0, [r1]
+ sev
+
+ /* back to arch calling code */
+ mov pc, lr
+
+/*
+ * insn. inside mailbox to poll SMP go signal.
+ *
+ * Note that as this code will be relocated, any
+ * pc-relative assembly should NOT be used.
+ */
+mailbox_insn:
+ /*
+ * r0 ~ r3 are parameters:
+ * r0 = SMP_MBOX_FIELD_GOSIGN
+ * r1 = SMP_MBOX_FIELD_ENTRY
+ * r2 = per-cpu go sign value
+ * r3 = no used now
+ */
+poll_mailbox_smp_go:
+ wfe
+ ldr r4, [r0]
+ cmp r2, r4
+ bne poll_mailbox_smp_go
+
+ /* SMP GO signal confirmed, release cpuN */
+ ldr pc, [r1]
+
+mailbox_insn_end:
+ /* should never reach */
+ b .
+
+#endif
diff --git a/arch/arm/mach-aspeed/ast2600/spl.c b/arch/arm/mach-aspeed/ast2600/spl.c
new file mode 100644
index 0000000..9201d4a
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2600/spl.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <spl.h>
+#include <init.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2600.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+ spl_early_init();
+ preloader_console_init();
+ timer_init();
+ dram_init();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_RAM;
+}
+
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ /*
+ * When boot from SPI, AST2600 already remap 0x00000000 ~ 0x0fffffff
+ * to BMC SPI memory space 0x20000000 ~ 0x2fffffff. The next stage BL
+ * has been located in SPI for XIP. In this case, the load buffer for
+ * SPL image loading will be set to the remapped address of the next
+ * BL instead of the DRAM space CONFIG_SYS_LOAD_ADDR
+ */
+ return (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* boot linux */
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+ return 0;
+}
+#endif
diff --git a/board/aspeed/evb_ast2600/Kconfig b/board/aspeed/evb_ast2600/Kconfig
new file mode 100644
index 0000000..42008cd
--- /dev/null
+++ b/board/aspeed/evb_ast2600/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_EVB_AST2600
+
+config SYS_BOARD
+ default "evb_ast2600"
+
+config SYS_VENDOR
+ default "aspeed"
+
+config SYS_CONFIG_NAME
+ default "evb_ast2600"
+
+endif
diff --git a/board/aspeed/evb_ast2600/MAINTAINERS b/board/aspeed/evb_ast2600/MAINTAINERS
new file mode 100644
index 0000000..e83aae5
--- /dev/null
+++ b/board/aspeed/evb_ast2600/MAINTAINERS
@@ -0,0 +1,6 @@
+EVB AST2600 BOARD
+M: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
+S: Maintained
+F: board/aspeed/evb_ast2600/
+F: include/configs/evb_ast2600.h
+F: configs/evb-ast2600_defconfig
diff --git a/board/aspeed/evb_ast2600/Makefile b/board/aspeed/evb_ast2600/Makefile
new file mode 100644
index 0000000..9291db6
--- /dev/null
+++ b/board/aspeed/evb_ast2600/Makefile
@@ -0,0 +1 @@
+obj-y += evb_ast2600.o
diff --git a/board/aspeed/evb_ast2600/evb_ast2600.c b/board/aspeed/evb_ast2600/evb_ast2600.c
new file mode 100644
index 0000000..e6dc8c7
--- /dev/null
+++ b/board/aspeed/evb_ast2600/evb_ast2600.c
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <common.h>
diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig
index 4b21db8..6f55cfa 100644
--- a/board/keymile/km_arm/Kconfig
+++ b/board/keymile/km_arm/Kconfig
@@ -58,8 +58,12 @@
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select USB
+ select USB_EHCI_HCD
+ select USB_EHCI_MARVELL
imply CMD_CRAMFS
imply CMD_DIAG
imply FS_CRAMFS
+ imply CMD_USB
endif
diff --git a/board/mediatek/pumpkin/pumpkin.c b/board/mediatek/pumpkin/pumpkin.c
index 666e4d6..37daf1c 100644
--- a/board/mediatek/pumpkin/pumpkin.c
+++ b/board/mediatek/pumpkin/pumpkin.c
@@ -4,8 +4,25 @@
*/
#include <common.h>
+#include <dm.h>
int board_init(void)
{
return 0;
}
+
+int board_late_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ if (CONFIG_IS_ENABLED(USB_GADGET)) {
+ ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
+ if (ret) {
+ pr_err("%s: Cannot find USB device\n", __func__);
+ return ret;
+ }
+ }
+
+ return 0;
+}
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 1b53e5b..0625ee4 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -928,6 +928,12 @@
help
GPIO support.
+config CMD_PWM
+ bool "pwm"
+ depends on DM_PWM
+ help
+ Control PWM channels, this allows invert/config/enable/disable PWM channels.
+
config CMD_GPT
bool "GPT (GUID Partition Table) command"
select EFI_PARTITION
diff --git a/cmd/Makefile b/cmd/Makefile
index 87aa949..176bf92 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -120,6 +120,7 @@
obj-$(CONFIG_CMD_PINMUX) += pinmux.o
obj-$(CONFIG_CMD_PMC) += pmc.o
obj-$(CONFIG_CMD_PSTORE) += pstore.o
+obj-$(CONFIG_CMD_PWM) += pwm.o
obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_CMD_QFW) += qfw.o
diff --git a/cmd/pwm.c b/cmd/pwm.c
new file mode 100644
index 0000000..5849fc5
--- /dev/null
+++ b/cmd/pwm.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Control PWM channels
+ *
+ * Copyright (c) 2020 SiFive, Inc
+ * author: Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <command.h>
+#include <dm.h>
+#include <pwm.h>
+
+enum pwm_cmd {
+ PWM_SET_INVERT,
+ PWM_SET_CONFIG,
+ PWM_SET_ENABLE,
+ PWM_SET_DISABLE,
+};
+
+static int do_pwm(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ const char *str_cmd, *str_channel = NULL, *str_enable = NULL;
+ const char *str_pwm = NULL, *str_period = NULL, *str_duty = NULL;
+ enum pwm_cmd sub_cmd;
+ struct udevice *dev;
+ u32 channel, pwm_enable, pwm_dev, period_ns = 0, duty_ns = 0;
+ int ret;
+
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ str_cmd = argv[1];
+ argc -= 2;
+ argv += 2;
+
+ if (argc > 0) {
+ str_pwm = *argv;
+ argc--;
+ argv++;
+ }
+
+ if (!str_pwm)
+ return CMD_RET_USAGE;
+
+ switch (*str_cmd) {
+ case 'i':
+ sub_cmd = PWM_SET_INVERT;
+ break;
+ case 'c':
+ sub_cmd = PWM_SET_CONFIG;
+ break;
+ case 'e':
+ sub_cmd = PWM_SET_ENABLE;
+ break;
+ case 'd':
+ sub_cmd = PWM_SET_DISABLE;
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+
+ pwm_dev = simple_strtoul(str_pwm, NULL, 10);
+ ret = uclass_get_device(UCLASS_PWM, pwm_dev, &dev);
+ if (ret) {
+ printf("pwm: '%s' not found\n", str_pwm);
+ return cmd_process_error(cmdtp, ret);
+ }
+
+ if (argc > 0) {
+ str_channel = *argv;
+ channel = simple_strtoul(str_channel, NULL, 10);
+ argc--;
+ argv++;
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ if (sub_cmd == PWM_SET_INVERT && argc > 0) {
+ str_enable = *argv;
+ pwm_enable = simple_strtoul(str_enable, NULL, 10);
+ ret = pwm_set_invert(dev, channel, pwm_enable);
+ } else if (sub_cmd == PWM_SET_CONFIG && argc == 2) {
+ str_period = *argv;
+ argc--;
+ argv++;
+ period_ns = simple_strtoul(str_period, NULL, 10);
+
+ if (argc > 0) {
+ str_duty = *argv;
+ duty_ns = simple_strtoul(str_duty, NULL, 10);
+ }
+
+ ret = pwm_set_config(dev, channel, period_ns, duty_ns);
+ } else if (sub_cmd == PWM_SET_ENABLE) {
+ ret = pwm_set_enable(dev, channel, 1);
+ } else if (sub_cmd == PWM_SET_DISABLE) {
+ ret = pwm_set_enable(dev, channel, 0);
+ } else {
+ printf("PWM arguments missing\n");
+ return CMD_RET_FAILURE;
+ }
+
+ if (ret) {
+ printf("error(%d)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(pwm, 6, 0, do_pwm,
+ "control pwm channels",
+ "pwm <invert> <pwm_dev_num> <channel> <polarity>\n"
+ "pwm <config> <pwm_dev_num> <channel> <period_ns> <duty_ns>\n"
+ "pwm <enable/disable> <pwm_dev_num> <channel>\n"
+ "Note: All input values are in decimal");
diff --git a/configs/cortina_presidio-asic-pnand_defconfig b/configs/cortina_presidio-asic-pnand_defconfig
new file mode 100644
index 0000000..e85cdc5
--- /dev/null
+++ b/configs/cortina_presidio-asic-pnand_defconfig
@@ -0,0 +1,33 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0"
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_MTD=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_CORTINA_NAND=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
new file mode 100644
index 0000000..003fedd
--- /dev/null
+++ b/configs/evb-ast2600_defconfig
@@ -0,0 +1,69 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_ASPEED=y
+CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_ASPEED_AST2600=y
+CONFIG_TARGET_EVB_AST2600=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x10000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SIZE_LIMIT=0x10000
+CONFIG_SPL=y
+# CONFIG_ARMV7_NONSEC is not set
+CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+# CONFIG_LEGACY_IMAGE_FORMAT is not set
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="bootm 20100000"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_SPL_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ASPEED=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_FTGMAC100=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_WDT=y
+CONFIG_HEXDUMP=y
+# CONFIG_SPL_HEXDUMP is not set
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig
index d97e588..151425f 100644
--- a/configs/km_kirkwood_128m16_defconfig
+++ b/configs/km_kirkwood_128m16_defconfig
@@ -8,7 +8,7 @@
CONFIG_ENV_OFFSET=0x0
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
-CONFIG_IDENT_STRING="\nKeymile Kirkwood 128M16"
+CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood 128M16"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_128M16"
CONFIG_AUTOBOOT_KEYED=y
@@ -17,16 +17,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig
index 0b364dcd..22c2e05 100644
--- a/configs/km_kirkwood_defconfig
+++ b/configs/km_kirkwood_defconfig
@@ -8,7 +8,7 @@
CONFIG_ENV_OFFSET=0x0
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
-CONFIG_IDENT_STRING="\nKeymile Kirkwood"
+CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD"
CONFIG_AUTOBOOT_KEYED=y
@@ -17,16 +17,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig
index 82d0210..c091cd6 100644
--- a/configs/km_kirkwood_pci_defconfig
+++ b/configs/km_kirkwood_pci_defconfig
@@ -9,7 +9,7 @@
CONFIG_ENV_OFFSET=0x0
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
-CONFIG_IDENT_STRING="\nKeymile Kirkwood PCI"
+CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood PCI"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI"
CONFIG_AUTOBOOT_KEYED=y
@@ -18,16 +18,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
@@ -46,6 +48,7 @@
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SF_DEFAULT_SPEED=8100000
+CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MVGBE=y
CONFIG_MII=y
diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
index b0ae24d..4d2c17f 100644
--- a/configs/kmcoge5un_defconfig
+++ b/configs/kmcoge5un_defconfig
@@ -12,7 +12,7 @@
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
-CONFIG_IDENT_STRING="\nKeymile COGE5UN"
+CONFIG_IDENT_STRING="\nHitachi Power Grids COGE5UN"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN"
CONFIG_AUTOBOOT_KEYED=y
@@ -21,16 +21,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig
index 6e6cc5a..faaa8d1 100644
--- a/configs/kmnusa_defconfig
+++ b/configs/kmnusa_defconfig
@@ -12,7 +12,7 @@
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
-CONFIG_IDENT_STRING="\nKeymile NUSA"
+CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA"
CONFIG_AUTOBOOT_KEYED=y
@@ -21,16 +21,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
diff --git a/configs/kmsuse2_defconfig b/configs/kmsuse2_defconfig
index 0b75b2e..d8280f9 100644
--- a/configs/kmsuse2_defconfig
+++ b/configs/kmsuse2_defconfig
@@ -13,7 +13,7 @@
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
-CONFIG_IDENT_STRING="\nABB SUSE2"
+CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
CONFIG_SYS_EXTRA_OPTIONS="KM_SUSE2"
CONFIG_AUTOBOOT_KEYED=y
@@ -22,16 +22,18 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);"
diff --git a/configs/pumpkin_defconfig b/configs/pumpkin_defconfig
index ab50124..cd77889 100644
--- a/configs/pumpkin_defconfig
+++ b/configs/pumpkin_defconfig
@@ -17,6 +17,7 @@
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_LATE_INIT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
@@ -45,8 +46,13 @@
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-# CONFIG_NET is not set
CONFIG_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x4d000000
+CONFIG_FASTBOOT_BUF_SIZE=0x4000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
# CONFIG_INPUT is not set
CONFIG_DM_MMC=y
# CONFIG_MMC_QUIRKS is not set
@@ -59,6 +65,13 @@
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_MTK_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_MT85XX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x0e8d
+CONFIG_USB_GADGET_PRODUCT_NUM=0x201c
CONFIG_WDT=y
CONFIG_WDT_MTK=y
# CONFIG_EFI_LOADER is not set
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 58d4ef1..86dc603 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -58,6 +58,7 @@
CONFIG_CMD_MUX=y
CONFIG_CMD_OSD=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_PWM=y
CONFIG_CMD_READ=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_SPI=y
diff --git a/doc/board/freescale/imx8mm_evk.rst b/doc/board/freescale/imx8mm_evk.rst
index f751902..a9ccdb7 100644
--- a/doc/board/freescale/imx8mm_evk.rst
+++ b/doc/board/freescale/imx8mm_evk.rst
@@ -18,7 +18,7 @@
Note: builddir is U-Boot build directory (source directory for in-tree builds)
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
.. code-block:: bash
@@ -30,10 +30,10 @@
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
- $ chmod +x firmware-imx-8.0.bin
- $ ./firmware-imx-8.0
- $ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+ $ chmod +x firmware-imx-8.9.bin
+ $ ./firmware-imx-8.9
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
diff --git a/doc/board/freescale/imx8mn_evk.rst b/doc/board/freescale/imx8mn_evk.rst
index c3e92ce..375e0bb 100644
--- a/doc/board/freescale/imx8mn_evk.rst
+++ b/doc/board/freescale/imx8mn_evk.rst
@@ -18,7 +18,7 @@
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.1.0
+branch: imx_5.4.47_2.2.0
.. code-block:: bash
@@ -30,10 +30,10 @@
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin
- $ chmod +x firmware-imx-8.5.bin
- $ ./firmware-imx-8.5
- $ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree)
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+ $ chmod +x firmware-imx-8.9.bin
+ $ ./firmware-imx-8.9
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/ddr4*.bin $(srctree)
Build U-Boot
------------
diff --git a/doc/board/freescale/imx8mp_evk.rst b/doc/board/freescale/imx8mp_evk.rst
index 96df6d4..ccffcf7 100644
--- a/doc/board/freescale/imx8mp_evk.rst
+++ b/doc/board/freescale/imx8mp_evk.rst
@@ -18,7 +18,7 @@
Note: $(srctree) is the U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_5.4.3_2.0.0
+branch: imx_5.4.47_2.2.0
.. code-block:: bash
@@ -30,13 +30,13 @@
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin
- $ chmod +x firmware-imx-8.7.bin
- $ ./firmware-imx-8.7.bin
- $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
- $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
- $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
- $ cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+ $ chmod +x firmware-imx-8.9.bin
+ $ ./firmware-imx-8.9.bin
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
Build U-Boot
------------
diff --git a/doc/board/freescale/imx8mq_evk.rst b/doc/board/freescale/imx8mq_evk.rst
index 0a64ecc..c269fde 100644
--- a/doc/board/freescale/imx8mq_evk.rst
+++ b/doc/board/freescale/imx8mq_evk.rst
@@ -18,7 +18,7 @@
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
-branch: imx_4.19.35_1.0.0
+branch: imx_5.4.47_2.2.0
.. code-block:: bash
@@ -30,11 +30,11 @@
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
- $ chmod +x firmware-imx-7.9.bin
- $ ./firmware-imx-7.9.bin
- $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
- $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
+ $ chmod +x firmware-imx-8.9.bin
+ $ ./firmware-imx-8.9.bin
+ $ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
diff --git a/drivers/clk/aspeed/Makefile b/drivers/clk/aspeed/Makefile
index 81764b4..84776e5 100644
--- a/drivers/clk/aspeed/Makefile
+++ b/drivers/clk/aspeed/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_ASPEED_AST2500) += clk_ast2500.o
+obj-$(CONFIG_ASPEED_AST2600) += clk_ast2600.o
diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
new file mode 100644
index 0000000..f72d384
--- /dev/null
+++ b/drivers/clk/aspeed/clk_ast2600.c
@@ -0,0 +1,1173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <dm/lists.h>
+#include <linux/delay.h>
+#include <asm/arch/scu_ast2600.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/reset/ast2600-reset.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CLKIN_25M 25000000UL
+
+/* MAC Clock Delay settings */
+#define MAC12_DEF_DELAY_1G 0x0041b75d
+#define MAC12_DEF_DELAY_100M 0x00417410
+#define MAC12_DEF_DELAY_10M 0x00417410
+#define MAC34_DEF_DELAY_1G 0x0010438a
+#define MAC34_DEF_DELAY_100M 0x00104208
+#define MAC34_DEF_DELAY_10M 0x00104208
+
+/*
+ * 3-bit encode of CPU freqeucy
+ * Some code is duplicated
+ */
+enum ast2600_cpu_freq {
+ CPU_FREQ_1200M_1,
+ CPU_FREQ_1600M_1,
+ CPU_FREQ_1200M_2,
+ CPU_FREQ_1600M_2,
+ CPU_FREQ_800M_1,
+ CPU_FREQ_800M_2,
+ CPU_FREQ_800M_3,
+ CPU_FREQ_800M_4,
+};
+
+struct ast2600_clk_priv {
+ struct ast2600_scu *scu;
+};
+
+/*
+ * Clock divider/multiplier configuration struct.
+ * For H-PLL and M-PLL the formula is
+ * (Output Frequency) = CLKIN * ((M + 1) / (N + 1)) / (P + 1)
+ * M - Numerator
+ * N - Denumerator
+ * P - Post Divider
+ * They have the same layout in their control register.
+ *
+ * D-PLL and D2-PLL have extra divider (OD + 1), which is not
+ * yet needed and ignored by clock configurations.
+ */
+union ast2600_pll_reg {
+ uint32_t w;
+ struct {
+ unsigned int m : 13;
+ unsigned int n : 6;
+ unsigned int p : 4;
+ unsigned int off : 1;
+ unsigned int bypass : 1;
+ unsigned int reset : 1;
+ unsigned int reserved : 6;
+ } b;
+};
+
+struct ast2600_pll_cfg {
+ union ast2600_pll_reg reg;
+ unsigned int ext_reg;
+};
+
+struct ast2600_pll_desc {
+ uint32_t in;
+ uint32_t out;
+ struct ast2600_pll_cfg cfg;
+};
+
+static const struct ast2600_pll_desc ast2600_pll_lookup[] = {
+ {
+ .in = CLKIN_25M,
+ .out = 400000000,
+ .cfg.reg.b.m = 95,
+ .cfg.reg.b.n = 2,
+ .cfg.reg.b.p = 1,
+ .cfg.ext_reg = 0x31,
+ },
+ {
+ .in = CLKIN_25M,
+ .out = 200000000,
+ .cfg.reg.b.m = 127,
+ .cfg.reg.b.n = 0,
+ .cfg.reg.b.p = 15,
+ .cfg.ext_reg = 0x3f,
+ },
+ {
+ .in = CLKIN_25M,
+ .out = 334000000,
+ .cfg.reg.b.m = 667,
+ .cfg.reg.b.n = 4,
+ .cfg.reg.b.p = 9,
+ .cfg.ext_reg = 0x14d,
+ },
+ {
+ .in = CLKIN_25M,
+ .out = 1000000000,
+ .cfg.reg.b.m = 119,
+ .cfg.reg.b.n = 2,
+ .cfg.reg.b.p = 0,
+ .cfg.ext_reg = 0x3d,
+ },
+ {
+ .in = CLKIN_25M,
+ .out = 50000000,
+ .cfg.reg.b.m = 95,
+ .cfg.reg.b.n = 2,
+ .cfg.reg.b.p = 15,
+ .cfg.ext_reg = 0x31,
+ },
+};
+
+/* divisor tables */
+static uint32_t axi_ahb_div0_table[] = {
+ 3, 2, 3, 4,
+};
+
+static uint32_t axi_ahb_div1_table[] = {
+ 3, 4, 6, 8,
+};
+
+static uint32_t axi_ahb_default_table[] = {
+ 3, 4, 3, 4, 2, 2, 2, 2,
+};
+
+extern uint32_t ast2600_get_pll_rate(struct ast2600_scu *scu, int pll_idx)
+{
+ union ast2600_pll_reg pll_reg;
+ uint32_t hwstrap1;
+ uint32_t cpu_freq;
+ uint32_t mul = 1, div = 1;
+
+ switch (pll_idx) {
+ case ASPEED_CLK_APLL:
+ pll_reg.w = readl(&scu->apll);
+ break;
+ case ASPEED_CLK_DPLL:
+ pll_reg.w = readl(&scu->dpll);
+ break;
+ case ASPEED_CLK_EPLL:
+ pll_reg.w = readl(&scu->epll);
+ break;
+ case ASPEED_CLK_HPLL:
+ pll_reg.w = readl(&scu->hpll);
+ break;
+ case ASPEED_CLK_MPLL:
+ pll_reg.w = readl(&scu->mpll);
+ break;
+ }
+
+ if (!pll_reg.b.bypass) {
+ /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1)
+ * HPLL Numerator (M) = fix 0x5F when SCU500[10]=1
+ * Fixed 0xBF when SCU500[10]=0 and SCU500[8]=1
+ * SCU200[12:0] (default 0x8F) when SCU510[10]=0 and SCU510[8]=0
+ * HPLL Denumerator (N) = SCU200[18:13] (default 0x2)
+ * HPLL Divider (P) = SCU200[22:19] (default 0x0)
+ * HPLL Bandwidth Adj (NB) = fix 0x2F when SCU500[10]=1
+ * Fixed 0x5F when SCU500[10]=0 and SCU500[8]=1
+ * SCU204[11:0] (default 0x31) when SCU500[10]=0 and SCU500[8]=0
+ */
+ if (pll_idx == ASPEED_CLK_HPLL) {
+ hwstrap1 = readl(&scu->hwstrap1);
+ cpu_freq = (hwstrap1 & SCU_HWSTRAP1_CPU_FREQ_MASK) >>
+ SCU_HWSTRAP1_CPU_FREQ_SHIFT;
+
+ switch (cpu_freq) {
+ case CPU_FREQ_800M_1:
+ case CPU_FREQ_800M_2:
+ case CPU_FREQ_800M_3:
+ case CPU_FREQ_800M_4:
+ pll_reg.b.m = 0x5f;
+ break;
+ case CPU_FREQ_1600M_1:
+ case CPU_FREQ_1600M_2:
+ pll_reg.b.m = 0xbf;
+ break;
+ default:
+ pll_reg.b.m = 0x8f;
+ break;
+ }
+ }
+
+ mul = (pll_reg.b.m + 1) / (pll_reg.b.n + 1);
+ div = (pll_reg.b.p + 1);
+ }
+
+ return ((CLKIN_25M * mul) / div);
+}
+
+static uint32_t ast2600_get_hclk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL);
+ uint32_t axi_div, ahb_div;
+ uint32_t hwstrap1 = readl(&scu->hwstrap1);
+ uint32_t cpu_freq = (hwstrap1 & SCU_HWSTRAP1_CPU_FREQ_MASK) >>
+ SCU_HWSTRAP1_CPU_FREQ_SHIFT;
+ uint32_t axi_ahb_ratio = (hwstrap1 & SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_MASK) >>
+ SCU_HWSTRAP1_AXI_AHB_CLK_RATIO_SHIFT;
+
+ if (hwstrap1 & SCU_HWSTRAP1_CPU_AXI_CLK_RATIO) {
+ axi_ahb_div1_table[0] = axi_ahb_default_table[cpu_freq] * 2;
+ axi_div = 1;
+ ahb_div = axi_ahb_div1_table[axi_ahb_ratio];
+ } else {
+ axi_ahb_div0_table[0] = axi_ahb_default_table[cpu_freq];
+ axi_div = 2;
+ ahb_div = axi_ahb_div0_table[axi_ahb_ratio];
+ }
+
+ return (rate / axi_div / ahb_div);
+}
+
+static uint32_t ast2600_get_bclk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL);
+ uint32_t clksrc1 = readl(&scu->clksrc1);
+ uint32_t bclk_div = (clksrc1 & SCU_CLKSRC1_BCLK_DIV_MASK) >>
+ SCU_CLKSRC1_BCLK_DIV_SHIFT;
+
+ return (rate / ((bclk_div + 1) * 4));
+}
+
+static uint32_t ast2600_get_pclk1_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL);
+ uint32_t clksrc1 = readl(&scu->clksrc1);
+ uint32_t pclk_div = (clksrc1 & SCU_CLKSRC1_PCLK_DIV_MASK) >>
+ SCU_CLKSRC1_PCLK_DIV_SHIFT;
+
+ return (rate / ((pclk_div + 1) * 4));
+}
+
+static uint32_t ast2600_get_pclk2_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_hclk_rate(scu);
+ uint32_t clksrc4 = readl(&scu->clksrc4);
+ uint32_t pclk_div = (clksrc4 & SCU_CLKSRC4_PCLK_DIV_MASK) >>
+ SCU_CLKSRC4_PCLK_DIV_SHIFT;
+
+ return (rate / ((pclk_div + 1) * 2));
+}
+
+static uint32_t ast2600_get_uxclk_in_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = 0;
+ uint32_t clksrc5 = readl(&scu->clksrc5);
+ uint32_t uxclk = (clksrc5 & SCU_CLKSRC5_UXCLK_MASK) >>
+ SCU_CLKSRC5_UXCLK_SHIFT;
+
+ switch (uxclk) {
+ case 0:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 4;
+ break;
+ case 1:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 2;
+ break;
+ case 2:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL);
+ break;
+ case 3:
+ rate = ast2600_get_hclk_rate(scu);
+ break;
+ }
+
+ return rate;
+}
+
+static uint32_t ast2600_get_huxclk_in_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = 0;
+ uint32_t clksrc5 = readl(&scu->clksrc5);
+ uint32_t huxclk = (clksrc5 & SCU_CLKSRC5_HUXCLK_MASK) >>
+ SCU_CLKSRC5_HUXCLK_SHIFT;
+
+ switch (huxclk) {
+ case 0:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 4;
+ break;
+ case 1:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL) / 2;
+ break;
+ case 2:
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL);
+ break;
+ case 3:
+ rate = ast2600_get_hclk_rate(scu);
+ break;
+ }
+
+ return rate;
+}
+
+static uint32_t ast2600_get_uart_uxclk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_uxclk_in_rate(scu);
+ uint32_t uart_clkgen = readl(&scu->uart_clkgen);
+ uint32_t n = (uart_clkgen & SCU_UART_CLKGEN_N_MASK) >>
+ SCU_UART_CLKGEN_N_SHIFT;
+ uint32_t r = (uart_clkgen & SCU_UART_CLKGEN_R_MASK) >>
+ SCU_UART_CLKGEN_R_SHIFT;
+
+ return ((rate * r) / (n * 2));
+}
+
+static uint32_t ast2600_get_uart_huxclk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_huxclk_in_rate(scu);
+ uint32_t huart_clkgen = readl(&scu->huart_clkgen);
+ uint32_t n = (huart_clkgen & SCU_HUART_CLKGEN_N_MASK) >>
+ SCU_HUART_CLKGEN_N_SHIFT;
+ uint32_t r = (huart_clkgen & SCU_HUART_CLKGEN_R_MASK) >>
+ SCU_HUART_CLKGEN_R_SHIFT;
+
+ return ((rate * r) / (n * 2));
+}
+
+static uint32_t ast2600_get_sdio_clk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = 0;
+ uint32_t clksrc4 = readl(&scu->clksrc4);
+ uint32_t sdio_div = (clksrc4 & SCU_CLKSRC4_SDIO_DIV_MASK) >>
+ SCU_CLKSRC4_SDIO_DIV_SHIFT;
+
+ if (clksrc4 & SCU_CLKSRC4_SDIO)
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL);
+ else
+ rate = ast2600_get_hclk_rate(scu);
+
+ return (rate / ((sdio_div + 1) * 2));
+}
+
+static uint32_t ast2600_get_emmc_clk_rate(struct ast2600_scu *scu)
+{
+ uint32_t rate = ast2600_get_pll_rate(scu, ASPEED_CLK_HPLL);
+ uint32_t clksrc1 = readl(&scu->clksrc1);
+ uint32_t emmc_div = (clksrc1 & SCU_CLKSRC1_EMMC_DIV_MASK) >>
+ SCU_CLKSRC1_EMMC_DIV_SHIFT;
+
+ return (rate / ((emmc_div + 1) * 4));
+}
+
+static uint32_t ast2600_get_uart_clk_rate(struct ast2600_scu *scu, int uart_idx)
+{
+ uint32_t rate = 0;
+ uint32_t uart5_clk = 0;
+ uint32_t clksrc2 = readl(&scu->clksrc2);
+ uint32_t clksrc4 = readl(&scu->clksrc4);
+ uint32_t clksrc5 = readl(&scu->clksrc5);
+ uint32_t misc_ctrl1 = readl(&scu->misc_ctrl1);
+
+ switch (uart_idx) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 6:
+ if (clksrc4 & BIT(uart_idx - 1))
+ rate = ast2600_get_uart_huxclk_rate(scu);
+ else
+ rate = ast2600_get_uart_uxclk_rate(scu);
+ break;
+ case 5:
+ /*
+ * SCU0C[12] and SCU304[14] together decide
+ * the UART5 clock generation
+ */
+ if (misc_ctrl1 & SCU_MISC_CTRL1_UART5_DIV)
+ uart5_clk = 0x1 << 1;
+
+ if (clksrc2 & SCU_CLKSRC2_UART5)
+ uart5_clk |= 0x1;
+
+ switch (uart5_clk) {
+ case 0:
+ rate = 24000000;
+ break;
+ case 1:
+ rate = 192000000;
+ break;
+ case 2:
+ rate = 24000000 / 13;
+ break;
+ case 3:
+ rate = 192000000 / 13;
+ break;
+ }
+
+ break;
+ case 7:
+ case 8:
+ case 9:
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ if (clksrc5 & BIT(uart_idx - 1))
+ rate = ast2600_get_uart_huxclk_rate(scu);
+ else
+ rate = ast2600_get_uart_uxclk_rate(scu);
+ break;
+ }
+
+ return rate;
+}
+
+static ulong ast2600_clk_get_rate(struct clk *clk)
+{
+ struct ast2600_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong rate = 0;
+
+ switch (clk->id) {
+ case ASPEED_CLK_HPLL:
+ case ASPEED_CLK_EPLL:
+ case ASPEED_CLK_DPLL:
+ case ASPEED_CLK_MPLL:
+ case ASPEED_CLK_APLL:
+ rate = ast2600_get_pll_rate(priv->scu, clk->id);
+ break;
+ case ASPEED_CLK_AHB:
+ rate = ast2600_get_hclk_rate(priv->scu);
+ break;
+ case ASPEED_CLK_APB1:
+ rate = ast2600_get_pclk1_rate(priv->scu);
+ break;
+ case ASPEED_CLK_APB2:
+ rate = ast2600_get_pclk2_rate(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_UART1CLK:
+ rate = ast2600_get_uart_clk_rate(priv->scu, 1);
+ break;
+ case ASPEED_CLK_GATE_UART2CLK:
+ rate = ast2600_get_uart_clk_rate(priv->scu, 2);
+ break;
+ case ASPEED_CLK_GATE_UART3CLK:
+ rate = ast2600_get_uart_clk_rate(priv->scu, 3);
+ break;
+ case ASPEED_CLK_GATE_UART4CLK:
+ rate = ast2600_get_uart_clk_rate(priv->scu, 4);
+ break;
+ case ASPEED_CLK_GATE_UART5CLK:
+ rate = ast2600_get_uart_clk_rate(priv->scu, 5);
+ break;
+ case ASPEED_CLK_BCLK:
+ rate = ast2600_get_bclk_rate(priv->scu);
+ break;
+ case ASPEED_CLK_SDIO:
+ rate = ast2600_get_sdio_clk_rate(priv->scu);
+ break;
+ case ASPEED_CLK_EMMC:
+ rate = ast2600_get_emmc_clk_rate(priv->scu);
+ break;
+ case ASPEED_CLK_UARTX:
+ rate = ast2600_get_uart_uxclk_rate(priv->scu);
+ break;
+ case ASPEED_CLK_HUARTX:
+ rate = ast2600_get_uart_huxclk_rate(priv->scu);
+ break;
+ default:
+ debug("can't get clk rate\n");
+ return -ENOENT;
+ }
+
+ return rate;
+}
+
+/**
+ * @brief lookup PLL divider config by input/output rate
+ * @param[in] *pll - PLL descriptor
+ * @return true - if PLL divider config is found, false - else
+ * The function caller shall fill "pll->in" and "pll->out",
+ * then this function will search the lookup table
+ * to find a valid PLL divider configuration.
+ */
+static bool ast2600_search_clock_config(struct ast2600_pll_desc *pll)
+{
+ uint32_t i;
+ const struct ast2600_pll_desc *def_desc;
+ bool is_found = false;
+
+ for (i = 0; i < ARRAY_SIZE(ast2600_pll_lookup); i++) {
+ def_desc = &ast2600_pll_lookup[i];
+
+ if (def_desc->in == pll->in && def_desc->out == pll->out) {
+ is_found = true;
+ pll->cfg.reg.w = def_desc->cfg.reg.w;
+ pll->cfg.ext_reg = def_desc->cfg.ext_reg;
+ break;
+ }
+ }
+ return is_found;
+}
+
+static uint32_t ast2600_configure_pll(struct ast2600_scu *scu,
+ struct ast2600_pll_cfg *p_cfg, int pll_idx)
+{
+ uint32_t addr, addr_ext;
+ uint32_t reg;
+
+ switch (pll_idx) {
+ case ASPEED_CLK_HPLL:
+ addr = (uint32_t)(&scu->hpll);
+ addr_ext = (uint32_t)(&scu->hpll_ext);
+ break;
+ case ASPEED_CLK_MPLL:
+ addr = (uint32_t)(&scu->mpll);
+ addr_ext = (uint32_t)(&scu->mpll_ext);
+ break;
+ case ASPEED_CLK_DPLL:
+ addr = (uint32_t)(&scu->dpll);
+ addr_ext = (uint32_t)(&scu->dpll_ext);
+ break;
+ case ASPEED_CLK_EPLL:
+ addr = (uint32_t)(&scu->epll);
+ addr_ext = (uint32_t)(&scu->epll_ext);
+ break;
+ case ASPEED_CLK_APLL:
+ addr = (uint32_t)(&scu->apll);
+ addr_ext = (uint32_t)(&scu->apll_ext);
+ break;
+ default:
+ debug("unknown PLL index\n");
+ return 1;
+ }
+
+ p_cfg->reg.b.bypass = 0;
+ p_cfg->reg.b.off = 1;
+ p_cfg->reg.b.reset = 1;
+
+ reg = readl(addr);
+ reg &= ~GENMASK(25, 0);
+ reg |= p_cfg->reg.w;
+ writel(reg, addr);
+
+ /* write extend parameter */
+ writel(p_cfg->ext_reg, addr_ext);
+ udelay(100);
+ p_cfg->reg.b.off = 0;
+ p_cfg->reg.b.reset = 0;
+ reg &= ~GENMASK(25, 0);
+ reg |= p_cfg->reg.w;
+ writel(reg, addr);
+ while (!(readl(addr_ext) & BIT(31)))
+ ;
+
+ return 0;
+}
+
+static uint32_t ast2600_configure_ddr(struct ast2600_scu *scu, ulong rate)
+{
+ struct ast2600_pll_desc mpll;
+
+ mpll.in = CLKIN_25M;
+ mpll.out = rate;
+ if (ast2600_search_clock_config(&mpll) == false) {
+ printf("error!! unable to find valid DDR clock setting\n");
+ return 0;
+ }
+ ast2600_configure_pll(scu, &mpll.cfg, ASPEED_CLK_MPLL);
+
+ return ast2600_get_pll_rate(scu, ASPEED_CLK_MPLL);
+}
+
+static ulong ast2600_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct ast2600_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong new_rate;
+
+ switch (clk->id) {
+ case ASPEED_CLK_MPLL:
+ new_rate = ast2600_configure_ddr(priv->scu, rate);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
+static uint32_t ast2600_configure_mac12_clk(struct ast2600_scu *scu)
+{
+ /* scu340[25:0]: 1G default delay */
+ clrsetbits_le32(&scu->mac12_clk_delay, GENMASK(25, 0),
+ MAC12_DEF_DELAY_1G);
+
+ /* set 100M/10M default delay */
+ writel(MAC12_DEF_DELAY_100M, &scu->mac12_clk_delay_100M);
+ writel(MAC12_DEF_DELAY_10M, &scu->mac12_clk_delay_10M);
+
+ /* MAC AHB = HPLL / 6 */
+ clrsetbits_le32(&scu->clksrc1, SCU_CLKSRC1_MAC_DIV_MASK,
+ (0x2 << SCU_CLKSRC1_MAC_DIV_SHIFT));
+
+ return 0;
+}
+
+static uint32_t ast2600_configure_mac34_clk(struct ast2600_scu *scu)
+{
+ /*
+ * scu350[31] RGMII 125M source: 0 = from IO pin
+ * scu350[25:0] MAC 1G delay
+ */
+ clrsetbits_le32(&scu->mac34_clk_delay, (BIT(31) | GENMASK(25, 0)),
+ MAC34_DEF_DELAY_1G);
+ writel(MAC34_DEF_DELAY_100M, &scu->mac34_clk_delay_100M);
+ writel(MAC34_DEF_DELAY_10M, &scu->mac34_clk_delay_10M);
+
+ /*
+ * clock source seletion and divider
+ * scu310[26:24] : MAC AHB bus clock = HCLK / 2
+ * scu310[18:16] : RMII 50M = HCLK_200M / 4
+ */
+ clrsetbits_le32(&scu->clksrc4,
+ (SCU_CLKSRC4_MAC_DIV_MASK | SCU_CLKSRC4_RMII34_DIV_MASK),
+ ((0x0 << SCU_CLKSRC4_MAC_DIV_SHIFT)
+ | (0x3 << SCU_CLKSRC4_RMII34_DIV_SHIFT)));
+
+ /*
+ * set driving strength
+ * scu458[3:2] : MAC4 driving strength
+ * scu458[1:0] : MAC3 driving strength
+ */
+ clrsetbits_le32(&scu->pinmux16,
+ SCU_PINCTRL16_MAC4_DRIVING_MASK | SCU_PINCTRL16_MAC3_DRIVING_MASK,
+ (0x3 << SCU_PINCTRL16_MAC4_DRIVING_SHIFT)
+ | (0x3 << SCU_PINCTRL16_MAC3_DRIVING_SHIFT));
+
+ return 0;
+}
+
+/**
+ * ast2600 RGMII clock source tree
+ * 125M from external PAD -------->|\
+ * HPLL -->|\ | |---->RGMII 125M for MAC#1 & MAC#2
+ * | |---->| divider |---->|/ +
+ * EPLL -->|/ |
+ * |
+ * +---------<-----------|RGMIICK PAD output enable|<-------------+
+ * |
+ * +--------------------------->|\
+ * | |----> RGMII 125M for MAC#3 & MAC#4
+ * HCLK 200M ---->|divider|---->|/
+ * To simplify the control flow:
+ * 1. RGMII 1/2 always use EPLL as the internal clock source
+ * 2. RGMII 3/4 always use RGMIICK pad as the RGMII 125M source
+ * 125M from external PAD -------->|\
+ * | |---->RGMII 125M for MAC#1 & MAC#2
+ * EPLL---->| divider |--->|/ +
+ * |
+ * +<--------------------|RGMIICK PAD output enable|<-------------+
+ * |
+ * +--------------------------->RGMII 125M for MAC#3 & MAC#4
+ */
+#define RGMIICK_SRC_PAD 0
+#define RGMIICK_SRC_EPLL 1 /* recommended */
+#define RGMIICK_SRC_HPLL 2
+
+#define RGMIICK_DIV2 1
+#define RGMIICK_DIV3 2
+#define RGMIICK_DIV4 3
+#define RGMIICK_DIV5 4
+#define RGMIICK_DIV6 5
+#define RGMIICK_DIV7 6
+#define RGMIICK_DIV8 7 /* recommended */
+
+#define RMIICK_DIV4 0
+#define RMIICK_DIV8 1
+#define RMIICK_DIV12 2
+#define RMIICK_DIV16 3
+#define RMIICK_DIV20 4 /* recommended */
+#define RMIICK_DIV24 5
+#define RMIICK_DIV28 6
+#define RMIICK_DIV32 7
+
+struct ast2600_mac_clk_div {
+ uint32_t src; /* 0=external PAD, 1=internal PLL */
+ uint32_t fin; /* divider input speed */
+ uint32_t n; /* 0=div2, 1=div2, 2=div3, 3=div4,...,7=div8 */
+ uint32_t fout; /* fout = fin / n */
+};
+
+struct ast2600_mac_clk_div rgmii_clk_defconfig = {
+ .src = ASPEED_CLK_EPLL,
+ .fin = 1000000000,
+ .n = RGMIICK_DIV8,
+ .fout = 125000000,
+};
+
+struct ast2600_mac_clk_div rmii_clk_defconfig = {
+ .src = ASPEED_CLK_EPLL,
+ .fin = 1000000000,
+ .n = RMIICK_DIV20,
+ .fout = 50000000,
+};
+
+static void ast2600_init_mac_pll(struct ast2600_scu *p_scu,
+ struct ast2600_mac_clk_div *p_cfg)
+{
+ struct ast2600_pll_desc pll;
+
+ pll.in = CLKIN_25M;
+ pll.out = p_cfg->fin;
+ if (ast2600_search_clock_config(&pll) == false) {
+ pr_err("unable to find valid ETHNET MAC clock setting\n");
+ return;
+ }
+ ast2600_configure_pll(p_scu, &pll.cfg, p_cfg->src);
+}
+
+static void ast2600_init_rgmii_clk(struct ast2600_scu *p_scu,
+ struct ast2600_mac_clk_div *p_cfg)
+{
+ uint32_t reg_304 = readl(&p_scu->clksrc2);
+ uint32_t reg_340 = readl(&p_scu->mac12_clk_delay);
+ uint32_t reg_350 = readl(&p_scu->mac34_clk_delay);
+
+ reg_340 &= ~GENMASK(31, 29);
+ /* scu340[28]: RGMIICK PAD output enable (to MAC 3/4) */
+ reg_340 |= BIT(28);
+ if (p_cfg->src == ASPEED_CLK_EPLL || p_cfg->src == ASPEED_CLK_HPLL) {
+ /*
+ * re-init PLL if the current PLL output frequency doesn't match
+ * the divider setting
+ */
+ if (p_cfg->fin != ast2600_get_pll_rate(p_scu, p_cfg->src))
+ ast2600_init_mac_pll(p_scu, p_cfg);
+ /* scu340[31]: select RGMII 125M from internal source */
+ reg_340 |= BIT(31);
+ }
+
+ reg_304 &= ~GENMASK(23, 20);
+
+ /* set clock divider */
+ reg_304 |= (p_cfg->n & 0x7) << 20;
+
+ /* select internal clock source */
+ if (p_cfg->src == ASPEED_CLK_HPLL)
+ reg_304 |= BIT(23);
+
+ /* RGMII 3/4 clock source select */
+ reg_350 &= ~BIT(31);
+
+ writel(reg_304, &p_scu->clksrc2);
+ writel(reg_340, &p_scu->mac12_clk_delay);
+ writel(reg_350, &p_scu->mac34_clk_delay);
+}
+
+/**
+ * ast2600 RMII/NCSI clock source tree
+ * HPLL -->|\
+ * | |---->| divider |----> RMII 50M for MAC#1 & MAC#2
+ * EPLL -->|/
+ * HCLK(SCLICLK)---->| divider |----> RMII 50M for MAC#3 & MAC#4
+ */
+static void ast2600_init_rmii_clk(struct ast2600_scu *p_scu,
+ struct ast2600_mac_clk_div *p_cfg)
+{
+ uint32_t clksrc2 = readl(&p_scu->clksrc2);
+ uint32_t clksrc4 = readl(&p_scu->clksrc4);
+
+ if (p_cfg->src == ASPEED_CLK_EPLL || p_cfg->src == ASPEED_CLK_HPLL) {
+ /*
+ * re-init PLL if the current PLL output frequency doesn't match
+ * the divider setting
+ */
+ if (p_cfg->fin != ast2600_get_pll_rate(p_scu, p_cfg->src))
+ ast2600_init_mac_pll(p_scu, p_cfg);
+ }
+
+ clksrc2 &= ~(SCU_CLKSRC2_RMII12 | SCU_CLKSRC2_RMII12_DIV_MASK);
+
+ /* set RMII 1/2 clock divider */
+ clksrc2 |= (p_cfg->n & 0x7) << 16;
+
+ /* RMII clock source selection */
+ if (p_cfg->src == ASPEED_CLK_HPLL)
+ clksrc2 |= SCU_CLKSRC2_RMII12;
+
+ /* set RMII 3/4 clock divider */
+ clksrc4 &= ~SCU_CLKSRC4_RMII34_DIV_MASK;
+ clksrc4 |= (0x3 << SCU_CLKSRC4_RMII34_DIV_SHIFT);
+
+ writel(clksrc2, &p_scu->clksrc2);
+ writel(clksrc4, &p_scu->clksrc4);
+}
+
+static uint32_t ast2600_configure_mac(struct ast2600_scu *scu, int index)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ switch (index) {
+ case 1:
+ reset_bit = BIT(ASPEED_RESET_MAC1);
+ clkgate_bit = SCU_CLKGATE1_MAC1;
+ writel(reset_bit, &scu->modrst_ctrl1);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr1);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr1);
+ break;
+ case 2:
+ reset_bit = BIT(ASPEED_RESET_MAC2);
+ clkgate_bit = SCU_CLKGATE1_MAC2;
+ writel(reset_bit, &scu->modrst_ctrl1);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr1);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr1);
+ break;
+ case 3:
+ reset_bit = BIT(ASPEED_RESET_MAC3 - 32);
+ clkgate_bit = SCU_CLKGATE2_MAC3;
+ writel(reset_bit, &scu->modrst_ctrl2);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr2);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr2);
+ break;
+ case 4:
+ reset_bit = BIT(ASPEED_RESET_MAC4 - 32);
+ clkgate_bit = SCU_CLKGATE2_MAC4;
+ writel(reset_bit, &scu->modrst_ctrl2);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr2);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void ast2600_configure_rsa_ecc_clk(struct ast2600_scu *scu)
+{
+ uint32_t clksrc1 = readl(&scu->clksrc1);
+
+ /* Configure RSA clock = HPLL/3 */
+ clksrc1 |= SCU_CLKSRC1_ECC_RSA;
+ clksrc1 &= ~SCU_CLKSRC1_ECC_RSA_DIV_MASK;
+ clksrc1 |= (2 << SCU_CLKSRC1_ECC_RSA_DIV_SHIFT);
+
+ writel(clksrc1, &scu->clksrc1);
+}
+
+static ulong ast2600_enable_sdclk(struct ast2600_scu *scu)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ reset_bit = BIT(ASPEED_RESET_SD - 32);
+ clkgate_bit = SCU_CLKGATE2_SDIO;
+
+ writel(reset_bit, &scu->modrst_ctrl2);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr2);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr2);
+
+ return 0;
+}
+
+static ulong ast2600_enable_extsdclk(struct ast2600_scu *scu)
+{
+ int i = 0;
+ uint32_t div = 0;
+ uint32_t rate = 0;
+ uint32_t clksrc4 = readl(&scu->clksrc4);
+
+ /*
+ * ast2600 SD controller max clk is 200Mhz
+ * use apll for clock source 800/4 = 200
+ * controller max is 200mhz
+ */
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_APLL);
+ for (i = 0; i < 8; i++) {
+ div = (i + 1) * 2;
+ if ((rate / div) <= 200000000)
+ break;
+ }
+ clksrc4 &= ~SCU_CLKSRC4_SDIO_DIV_MASK;
+ clksrc4 |= (i << SCU_CLKSRC4_SDIO_DIV_SHIFT);
+ clksrc4 |= SCU_CLKSRC4_SDIO;
+ writel(clksrc4, &scu->clksrc4);
+
+ setbits_le32(&scu->clksrc4, SCU_CLKSRC4_SDIO_EN);
+
+ return 0;
+}
+
+static ulong ast2600_enable_emmcclk(struct ast2600_scu *scu)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ reset_bit = BIT(ASPEED_RESET_EMMC);
+ clkgate_bit = SCU_CLKGATE1_EMMC;
+
+ writel(reset_bit, &scu->modrst_ctrl1);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr1);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr1);
+
+ return 0;
+}
+
+static ulong ast2600_enable_extemmcclk(struct ast2600_scu *scu)
+{
+ int i = 0;
+ uint32_t div = 0;
+ uint32_t rate = 0;
+ uint32_t clksrc1 = readl(&scu->clksrc1);
+
+ /*
+ * ast2600 eMMC controller max clk is 200Mhz
+ * HPll->1/2->|\
+ * |->SCU300[11]->SCU300[14:12][1/N] +
+ * MPLL------>|/ |
+ * +----------------------------------------------+
+ * |
+ * +---------> EMMC12C[15:8][1/N]-> eMMC clk
+ */
+ rate = ast2600_get_pll_rate(scu, ASPEED_CLK_MPLL);
+ for (i = 0; i < 8; i++) {
+ div = (i + 1) * 2;
+ if ((rate / div) <= 200000000)
+ break;
+ }
+
+ clksrc1 &= ~SCU_CLKSRC1_EMMC_DIV_MASK;
+ clksrc1 |= (i << SCU_CLKSRC1_EMMC_DIV_SHIFT);
+ clksrc1 |= SCU_CLKSRC1_EMMC;
+ writel(clksrc1, &scu->clksrc1);
+
+ setbits_le32(&scu->clksrc1, SCU_CLKSRC1_EMMC_EN);
+
+ return 0;
+}
+
+static ulong ast2600_enable_fsiclk(struct ast2600_scu *scu)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ reset_bit = BIT(ASPEED_RESET_FSI % 32);
+ clkgate_bit = SCU_CLKGATE2_FSI;
+
+ /* The FSI clock is shared between masters. If it's already on
+ * don't touch it, as that will reset the existing master.
+ */
+ if (!(readl(&scu->clkgate_ctrl2) & clkgate_bit)) {
+ debug("%s: already running, not touching it\n", __func__);
+ return 0;
+ }
+
+ writel(reset_bit, &scu->modrst_ctrl2);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr2);
+ mdelay(10);
+ writel(reset_bit, &scu->modrst_clr2);
+
+ return 0;
+}
+
+static ulong ast2600_enable_usbahclk(struct ast2600_scu *scu)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ reset_bit = BIT(ASPEED_RESET_EHCI_P1);
+ clkgate_bit = SCU_CLKGATE1_USB_HUB;
+
+ writel(reset_bit, &scu->modrst_ctrl1);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_ctrl1);
+ mdelay(20);
+ writel(reset_bit, &scu->modrst_clr1);
+
+ return 0;
+}
+
+static ulong ast2600_enable_usbbhclk(struct ast2600_scu *scu)
+{
+ uint32_t reset_bit;
+ uint32_t clkgate_bit;
+
+ reset_bit = BIT(ASPEED_RESET_EHCI_P2);
+ clkgate_bit = SCU_CLKGATE1_USB_HOST2;
+
+ writel(reset_bit, &scu->modrst_ctrl1);
+ udelay(100);
+ writel(clkgate_bit, &scu->clkgate_clr1);
+ mdelay(20);
+ writel(reset_bit, &scu->modrst_clr1);
+
+ return 0;
+}
+
+static int ast2600_clk_enable(struct clk *clk)
+{
+ struct ast2600_clk_priv *priv = dev_get_priv(clk->dev);
+
+ switch (clk->id) {
+ case ASPEED_CLK_GATE_MAC1CLK:
+ ast2600_configure_mac(priv->scu, 1);
+ break;
+ case ASPEED_CLK_GATE_MAC2CLK:
+ ast2600_configure_mac(priv->scu, 2);
+ break;
+ case ASPEED_CLK_GATE_MAC3CLK:
+ ast2600_configure_mac(priv->scu, 3);
+ break;
+ case ASPEED_CLK_GATE_MAC4CLK:
+ ast2600_configure_mac(priv->scu, 4);
+ break;
+ case ASPEED_CLK_GATE_SDCLK:
+ ast2600_enable_sdclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_SDEXTCLK:
+ ast2600_enable_extsdclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_EMMCCLK:
+ ast2600_enable_emmcclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_EMMCEXTCLK:
+ ast2600_enable_extemmcclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_FSICLK:
+ ast2600_enable_fsiclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_USBPORT1CLK:
+ ast2600_enable_usbahclk(priv->scu);
+ break;
+ case ASPEED_CLK_GATE_USBPORT2CLK:
+ ast2600_enable_usbbhclk(priv->scu);
+ break;
+ default:
+ pr_err("can't enable clk\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+struct clk_ops ast2600_clk_ops = {
+ .get_rate = ast2600_clk_get_rate,
+ .set_rate = ast2600_clk_set_rate,
+ .enable = ast2600_clk_enable,
+};
+
+static int ast2600_clk_probe(struct udevice *dev)
+{
+ struct ast2600_clk_priv *priv = dev_get_priv(dev);
+
+ priv->scu = devfdt_get_addr_ptr(dev);
+ if (IS_ERR(priv->scu))
+ return PTR_ERR(priv->scu);
+
+ ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig);
+ ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig);
+ ast2600_configure_mac12_clk(priv->scu);
+ ast2600_configure_mac34_clk(priv->scu);
+ ast2600_configure_rsa_ecc_clk(priv->scu);
+
+ return 0;
+}
+
+static int ast2600_clk_bind(struct udevice *dev)
+{
+ int ret;
+
+ /* The reset driver does not have a device node, so bind it here */
+ ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
+ if (ret)
+ debug("Warning: No reset driver: ret=%d\n", ret);
+
+ return 0;
+}
+
+struct aspeed_clks {
+ ulong id;
+ const char *name;
+};
+
+static struct aspeed_clks aspeed_clk_names[] = {
+ { ASPEED_CLK_HPLL, "hpll" },
+ { ASPEED_CLK_MPLL, "mpll" },
+ { ASPEED_CLK_APLL, "apll" },
+ { ASPEED_CLK_EPLL, "epll" },
+ { ASPEED_CLK_DPLL, "dpll" },
+ { ASPEED_CLK_AHB, "hclk" },
+ { ASPEED_CLK_APB1, "pclk1" },
+ { ASPEED_CLK_APB2, "pclk2" },
+ { ASPEED_CLK_BCLK, "bclk" },
+ { ASPEED_CLK_UARTX, "uxclk" },
+ { ASPEED_CLK_HUARTX, "huxclk" },
+};
+
+int soc_clk_dump(void)
+{
+ struct udevice *dev;
+ struct clk clk;
+ unsigned long rate;
+ int i, ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(aspeed_scu),
+ &dev);
+ if (ret)
+ return ret;
+
+ printf("Clk\t\tHz\n");
+
+ for (i = 0; i < ARRAY_SIZE(aspeed_clk_names); i++) {
+ clk.id = aspeed_clk_names[i].id;
+ ret = clk_request(dev, &clk);
+ if (ret < 0) {
+ debug("%s clk_request() failed: %d\n", __func__, ret);
+ continue;
+ }
+
+ ret = clk_get_rate(&clk);
+ rate = ret;
+
+ clk_free(&clk);
+
+ if (ret == -ENOTSUPP) {
+ printf("clk ID %lu not supported yet\n",
+ aspeed_clk_names[i].id);
+ continue;
+ }
+ if (ret < 0) {
+ printf("%s %lu: get_rate err: %d\n", __func__,
+ aspeed_clk_names[i].id, ret);
+ continue;
+ }
+
+ printf("%s(%3lu):\t%lu\n", aspeed_clk_names[i].name,
+ aspeed_clk_names[i].id, rate);
+ }
+
+ return 0;
+}
+
+static const struct udevice_id ast2600_clk_ids[] = {
+ { .compatible = "aspeed,ast2600-scu", },
+ { },
+};
+
+U_BOOT_DRIVER(aspeed_ast2600_scu) = {
+ .name = "aspeed_ast2600_scu",
+ .id = UCLASS_CLK,
+ .of_match = ast2600_clk_ids,
+ .priv_auto = sizeof(struct ast2600_clk_priv),
+ .ops = &ast2600_clk_ops,
+ .bind = ast2600_clk_bind,
+ .probe = ast2600_clk_probe,
+};
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 237fd17..522e724 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -7,5 +7,6 @@
obj-$(CONFIG_TARGET_MT7623) += clk-mt7623.o
obj-$(CONFIG_TARGET_MT7622) += clk-mt7622.o
obj-$(CONFIG_TARGET_MT7629) += clk-mt7629.o
+obj-$(CONFIG_TARGET_MT8183) += clk-mt8183.o
obj-$(CONFIG_TARGET_MT8516) += clk-mt8516.o
obj-$(CONFIG_TARGET_MT8518) += clk-mt8518.o
diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c
new file mode 100644
index 0000000..17e653a
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183.c
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MediaTek clock driver for MT8183 SoC
+ *
+ * Copyright (C) 2020 BayLibre, SAS
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <dt-bindings/clock/mt8183-clk.h>
+
+#include "clk-mtk.h"
+
+#define MT8183_PLL_FMAX (3800UL * MHZ)
+#define MT8183_PLL_FMIN (1500UL * MHZ)
+
+/* apmixedsys */
+#define PLL(_id, _reg, _pwr_reg, _en_mask, _flags, _rst_bar_mask, _pcwbits, \
+ _pcwibits, _pd_reg, _pd_shift, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .rst_bar_mask = _rst_bar_mask, \
+ .fmax = MT8183_PLL_FMAX, \
+ .fmin = MT8183_PLL_FMIN, \
+ .flags = _flags, \
+ .pcwbits = _pcwbits, \
+ .pcwibits = _pcwibits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data apmixed_plls[] = {
+ PLL(CLK_APMIXED_ARMPLL_LL, 0x0200, 0x020C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0204, 24,
+ 0x0204, 0),
+ PLL(CLK_APMIXED_ARMPLL_L, 0x0210, 0x021C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0214, 24,
+ 0x0214, 0),
+ PLL(CLK_APMIXED_CCIPLL, 0x0290, 0x029C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0294, 24,
+ 0x0294, 0),
+ PLL(CLK_APMIXED_MAINPLL, 0x0220, 0x022C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0224, 24,
+ 0x0224, 0),
+ PLL(CLK_APMIXED_UNIV2PLL, 0x0230, 0x023C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0234, 24,
+ 0x0234, 0),
+ PLL(CLK_APMIXED_MSDCPLL, 0x0250, 0x025C, 0x00000001,
+ 0, 0, 22, 8, 0x0254, 24, 0x0254, 0),
+ PLL(CLK_APMIXED_MMPLL, 0x0270, 0x027C, 0x00000001,
+ HAVE_RST_BAR, BIT(23), 22, 8, 0x0274, 24,
+ 0x0274, 0),
+ PLL(CLK_APMIXED_MFGPLL, 0x0240, 0x024C, 0x00000001,
+ 0, 0, 22, 8, 0x0244, 24, 0x0244, 0),
+ PLL(CLK_APMIXED_TVDPLL, 0x0260, 0x026C, 0x00000001,
+ 0, 0, 22, 8, 0x0264, 24, 0x0264, 0),
+ PLL(CLK_APMIXED_APLL1, 0x02A0, 0x02B0, 0x00000001,
+ 0, 0, 32, 8, 0x02A0, 1, 0x02A4, 0),
+ PLL(CLK_APMIXED_APLL2, 0x02b4, 0x02c4, 0x00000001,
+ 0, 0, 32, 8, 0x02B4, 1, 0x02B8, 0),
+};
+
+static const struct mtk_fixed_clk top_fixed_clks[] = {
+ FIXED_CLK(CLK_TOP_CLK26M, CLK_XTAL, 26000000),
+ FIXED_CLK(CLK_TOP_ULPOSC, CLK_XTAL, 250000),
+ FIXED_CLK(CLK_TOP_UNIVP_192M, CLK_TOP_UNIVPLL, 192000000),
+};
+
+static const struct mtk_fixed_factor top_fixed_divs[] = {
+ FACTOR(CLK_TOP_CLK13M, CLK_TOP_CLK26M, 1, 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_F26M_CK_D2, CLK_TOP_CLK26M, 1, 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_CK, CLK_APMIXED_MAINPLL, 1,
+ 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_SYSPLL_D2, CLK_TOP_SYSPLL_CK, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D3, CLK_APMIXED_MAINPLL, 1,
+ 3, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_SYSPLL_D5, CLK_APMIXED_MAINPLL, 1,
+ 5, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_SYSPLL_D7, CLK_APMIXED_MAINPLL, 1,
+ 7, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_SYSPLL_D2_D2, CLK_TOP_SYSPLL_D2, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D2_D4, CLK_TOP_SYSPLL_D2, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D2_D8, CLK_TOP_SYSPLL_D2, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D2_D16, CLK_TOP_SYSPLL_D2, 1,
+ 16, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D3_D2, CLK_TOP_SYSPLL_D3, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D3_D4, CLK_TOP_SYSPLL_D3, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D3_D8, CLK_TOP_SYSPLL_D3, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D5_D2, CLK_TOP_SYSPLL_D5, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D5_D4, CLK_TOP_SYSPLL_D5, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D7_D2, CLK_TOP_SYSPLL_D7, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_SYSPLL_D7_D4, CLK_TOP_SYSPLL_D7, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_CK, CLK_TOP_UNIVPLL, 1, 1, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D2, CLK_TOP_UNIVPLL_CK, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D3, CLK_TOP_UNIVPLL, 1, 3, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D5, CLK_TOP_UNIVPLL, 1, 5, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D7, CLK_TOP_UNIVPLL, 1, 7, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D2, CLK_TOP_UNIVPLL_D2, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D4, CLK_TOP_UNIVPLL_D2, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D8, CLK_TOP_UNIVPLL_D2, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D2, CLK_TOP_UNIVPLL_D3, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D4, CLK_TOP_UNIVPLL_D3, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D8, CLK_TOP_UNIVPLL_D3, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D2, CLK_TOP_UNIVPLL_D5, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D4, CLK_TOP_UNIVPLL_D5, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D8, CLK_TOP_UNIVPLL_D5, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_CK, CLK_TOP_UNIVP_192M, 1, 1,
+ CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_D2, CLK_TOP_UNIVP_192M_CK, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_D4, CLK_TOP_UNIVP_192M_CK, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_D8, CLK_TOP_UNIVP_192M_CK, 1,
+ 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_D16, CLK_TOP_UNIVP_192M_CK, 1,
+ 16, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVP_192M_D32, CLK_TOP_UNIVP_192M_CK, 1,
+ 32, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_APLL1_CK, CLK_APMIXED_APLL1, 1, 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL1_D2, CLK_APMIXED_APLL1, 1, 2, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL1_D4, CLK_APMIXED_APLL1, 1, 4, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL1_D8, CLK_APMIXED_APLL1, 1, 8, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL2_CK, CLK_APMIXED_APLL2, 1, 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL2_D2, CLK_APMIXED_APLL2, 1, 2, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL2_D4, CLK_APMIXED_APLL2, 1, 4, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_APLL2_D8, CLK_APMIXED_APLL2, 1, 8, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_TVDPLL_CK, CLK_APMIXED_TVDPLL, 1, 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_TVDPLL_D2, CLK_TOP_TVDPLL_CK, 1, 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_TVDPLL_D4, CLK_APMIXED_TVDPLL, 1, 4, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_TVDPLL_D8, CLK_APMIXED_TVDPLL, 1, 8, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_TVDPLL_D16, CLK_APMIXED_TVDPLL, 1,
+ 16, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MMPLL_CK, CLK_APMIXED_MMPLL, 1, 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MMPLL_D4, CLK_APMIXED_MMPLL, 1, 4, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MMPLL_D4_D2, CLK_TOP_MMPLL_D4, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_MMPLL_D4_D4, CLK_TOP_MMPLL_D4, 1, 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_MMPLL_D5, CLK_APMIXED_MMPLL, 1, 5, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MMPLL_D5_D2, CLK_TOP_MMPLL_D5, 1,
+ 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_MMPLL_D5_D4, CLK_TOP_MMPLL_D5, 1,
+ 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_MMPLL_D6, CLK_APMIXED_MMPLL, 1, 6, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MMPLL_D7, CLK_APMIXED_MMPLL, 1, 7, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MFGPLL_CK, CLK_APMIXED_MFGPLL, 1, 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MSDCPLL_CK, CLK_APMIXED_MSDCPLL, 1,
+ 1, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MSDCPLL_D2, CLK_APMIXED_MSDCPLL, 1,
+ 2, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MSDCPLL_D4, CLK_APMIXED_MSDCPLL, 1,
+ 4, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MSDCPLL_D8, CLK_APMIXED_MSDCPLL, 1,
+ 8, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_MSDCPLL_D16, CLK_APMIXED_MSDCPLL, 1,
+ 16, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_AD_OSC_CK, CLK_TOP_ULPOSC, 1, 1, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_OSC_D2, CLK_TOP_ULPOSC, 1, 2, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_OSC_D4, CLK_TOP_ULPOSC, 1, 4, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_OSC_D8, CLK_TOP_ULPOSC, 1, 8, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_OSC_D16, CLK_TOP_ULPOSC, 1, 16, CLK_PARENT_TOPCKGEN),
+ FACTOR(CLK_TOP_UNIVPLL, CLK_APMIXED_UNIV2PLL, 1, 2, CLK_PARENT_APMIXED),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D16, CLK_TOP_UNIVPLL_D3, 1,
+ 16, CLK_PARENT_TOPCKGEN),
+};
+
+static const int axi_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D4,
+ CLK_TOP_SYSPLL_D7,
+ CLK_TOP_OSC_D4
+};
+
+static const int mm_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int img_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int cam_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3_D2,
+ CLK_TOP_UNIVPLL_D3_D2
+};
+
+static const int dsp_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int dsp1_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int dsp2_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int ipu_if_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_MMPLL_D7,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int mfg_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MFGPLL_CK,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_SYSPLL_D3
+};
+
+static const int f52m_mfg_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_UNIVPLL_D3_D4,
+ CLK_TOP_UNIVPLL_D3_D8
+};
+
+static const int camtg_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVP_192M_D8,
+ CLK_TOP_UNIVPLL_D3_D8,
+ CLK_TOP_UNIVP_192M_D4,
+ CLK_TOP_UNIVPLL_D3_D16,
+ CLK_TOP_F26M_CK_D2,
+ CLK_TOP_UNIVP_192M_D16,
+ CLK_TOP_UNIVP_192M_D32
+};
+
+static const int camtg2_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVP_192M_D8,
+ CLK_TOP_UNIVPLL_D3_D8,
+ CLK_TOP_UNIVP_192M_D4,
+ CLK_TOP_UNIVPLL_D3_D16,
+ CLK_TOP_F26M_CK_D2,
+ CLK_TOP_UNIVP_192M_D16,
+ CLK_TOP_UNIVP_192M_D32
+};
+
+static const int camtg3_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVP_192M_D8,
+ CLK_TOP_UNIVPLL_D3_D8,
+ CLK_TOP_UNIVP_192M_D4,
+ CLK_TOP_UNIVPLL_D3_D16,
+ CLK_TOP_F26M_CK_D2,
+ CLK_TOP_UNIVP_192M_D16,
+ CLK_TOP_UNIVP_192M_D32
+};
+
+static const int camtg4_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVP_192M_D8,
+ CLK_TOP_UNIVPLL_D3_D8,
+ CLK_TOP_UNIVP_192M_D4,
+ CLK_TOP_UNIVPLL_D3_D16,
+ CLK_TOP_F26M_CK_D2,
+ CLK_TOP_UNIVP_192M_D16,
+ CLK_TOP_UNIVP_192M_D32
+};
+
+static const int uart_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D3_D8
+};
+
+static const int spi_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D5_D2,
+ CLK_TOP_SYSPLL_D3_D4,
+ CLK_TOP_MSDCPLL_D4
+};
+
+static const int msdc50_hclk_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3_D2
+};
+
+static const int msdc50_0_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_MSDCPLL_CK,
+ CLK_TOP_MSDCPLL_D2,
+ CLK_TOP_UNIVPLL_D2_D4,
+ CLK_TOP_SYSPLL_D3_D2,
+ CLK_TOP_UNIVPLL_D2_D2
+};
+
+static const int msdc30_1_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2,
+ CLK_TOP_SYSPLL_D7,
+ CLK_TOP_MSDCPLL_D2
+};
+
+static const int msdc30_2_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_SYSPLL_D3_D2,
+ CLK_TOP_SYSPLL_D7,
+ CLK_TOP_MSDCPLL_D2
+};
+
+static const int audio_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D5_D4,
+ CLK_TOP_SYSPLL_D7_D4,
+ CLK_TOP_SYSPLL_D2_D16
+};
+
+static const int aud_intbus_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D4,
+ CLK_TOP_SYSPLL_D7_D2
+};
+
+static const int pmicspi_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D8,
+ CLK_TOP_OSC_D8
+};
+
+static const int fpwrap_ulposc_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_OSC_D16,
+ CLK_TOP_OSC_D4,
+ CLK_TOP_OSC_D8
+};
+
+static const int atb_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D5
+};
+
+static const int sspm_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D2_D4,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3
+};
+
+static const int dpi0_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_TVDPLL_D2,
+ CLK_TOP_TVDPLL_D4,
+ CLK_TOP_TVDPLL_D8,
+ CLK_TOP_TVDPLL_D16,
+ CLK_TOP_UNIVPLL_D5_D2,
+ CLK_TOP_UNIVPLL_D3_D4,
+ CLK_TOP_SYSPLL_D3_D4,
+ CLK_TOP_UNIVPLL_D3_D8
+};
+
+static const int scam_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D5_D2
+};
+
+static const int disppwm_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D3_D4,
+ CLK_TOP_OSC_D2,
+ CLK_TOP_OSC_D4,
+ CLK_TOP_OSC_D16
+};
+
+static const int usb_top_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D5_D4,
+ CLK_TOP_UNIVPLL_D3_D4,
+ CLK_TOP_UNIVPLL_D5_D2
+};
+
+static const int ssusb_top_xhci_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D5_D4,
+ CLK_TOP_UNIVPLL_D3_D4,
+ CLK_TOP_UNIVPLL_D5_D2
+};
+
+static const int spm_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D8
+};
+
+static const int i2c_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D8,
+ CLK_TOP_UNIVPLL_D5_D2
+};
+
+static const int scp_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D2_D8,
+ CLK_TOP_SYSPLL_D5,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_UNIVPLL_D3
+};
+
+static const int seninf_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_UNIVPLL_D2_D2,
+ CLK_TOP_UNIVPLL_D3_D2,
+ CLK_TOP_UNIVPLL_D2_D4
+};
+
+static const int dxcc_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D2_D4,
+ CLK_TOP_SYSPLL_D2_D8
+};
+
+static const int aud_engen1_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_APLL1_D2,
+ CLK_TOP_APLL1_D4,
+ CLK_TOP_APLL1_D8
+};
+
+static const int aud_engen2_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_APLL2_D2,
+ CLK_TOP_APLL2_D4,
+ CLK_TOP_APLL2_D8
+};
+
+static const int faes_ufsfde_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2,
+ CLK_TOP_SYSPLL_D2_D2,
+ CLK_TOP_SYSPLL_D3,
+ CLK_TOP_SYSPLL_D2_D4,
+ CLK_TOP_UNIVPLL_D3
+};
+
+static const int fufs_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_SYSPLL_D2_D4,
+ CLK_TOP_SYSPLL_D2_D8,
+ CLK_TOP_SYSPLL_D2_D16
+};
+
+static const int aud_1_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_APLL1_CK
+};
+
+static const int aud_2_parents[] = {
+ CLK_TOP_CLK26M,
+ CLK_TOP_APLL2_CK
+};
+
+static const struct mtk_composite top_muxes[] = {
+ /* CLK_CFG_0 */
+ MUX(CLK_TOP_MUX_AXI, axi_parents, 0x40, 0, 2),
+ MUX(CLK_TOP_MUX_MM, mm_parents, 0x40, 8, 3),
+ MUX(CLK_TOP_MUX_IMG, img_parents, 0x40, 16, 3),
+ MUX(CLK_TOP_MUX_CAM, cam_parents, 0x40, 24, 4),
+ /* CLK_CFG_1 */
+ MUX(CLK_TOP_MUX_DSP, dsp_parents, 0x50, 0, 4),
+ MUX(CLK_TOP_MUX_DSP1, dsp1_parents, 0x50, 8, 4),
+ MUX(CLK_TOP_MUX_DSP2, dsp2_parents, 0x50, 16, 4),
+ MUX(CLK_TOP_MUX_IPU_IF, ipu_if_parents, 0x50, 24, 4),
+ /* CLK_CFG_2 */
+ MUX(CLK_TOP_MUX_MFG, mfg_parents, 0x60, 0, 2),
+ MUX(CLK_TOP_MUX_F52M_MFG, f52m_mfg_parents, 0x60, 8, 2),
+ MUX(CLK_TOP_MUX_CAMTG, camtg_parents, 0x60, 16, 3),
+ MUX(CLK_TOP_MUX_CAMTG2, camtg2_parents, 0x60, 24, 3),
+ /* CLK_CFG_3 */
+ MUX(CLK_TOP_MUX_CAMTG3, camtg3_parents, 0x70, 0, 3),
+ MUX(CLK_TOP_MUX_CAMTG4, camtg4_parents, 0x70, 8, 3),
+ MUX(CLK_TOP_MUX_UART, uart_parents, 0x70, 16, 1),
+ MUX(CLK_TOP_MUX_SPI, spi_parents, 0x70, 24, 2),
+ /* CLK_CFG_4 */
+ MUX(CLK_TOP_MUX_MSDC50_0_HCLK, msdc50_hclk_parents, 0x80, 0, 2),
+ MUX(CLK_TOP_MUX_MSDC50_0, msdc50_0_parents, 0x80, 8, 3),
+ MUX(CLK_TOP_MUX_MSDC30_1, msdc30_1_parents, 0x80, 16, 3),
+ MUX(CLK_TOP_MUX_MSDC30_2, msdc30_2_parents, 0x80, 24, 3),
+ /* CLK_CFG_5 */
+ MUX(CLK_TOP_MUX_AUDIO, audio_parents, 0x90, 0, 2),
+ MUX(CLK_TOP_MUX_AUD_INTBUS, aud_intbus_parents, 0x90, 8, 2),
+ MUX(CLK_TOP_MUX_PMICSPI, pmicspi_parents, 0x90, 16, 2),
+ MUX(CLK_TOP_MUX_FPWRAP_ULPOSC, fpwrap_ulposc_parents, 0x90, 24, 2),
+ /* CLK_CFG_6 */
+ MUX(CLK_TOP_MUX_ATB, atb_parents, 0xa0, 0, 2),
+ MUX(CLK_TOP_MUX_SSPM, sspm_parents, 0xa0, 8, 3),
+ MUX(CLK_TOP_MUX_DPI0, dpi0_parents, 0xa0, 16, 4),
+ MUX(CLK_TOP_MUX_SCAM, scam_parents, 0xa0, 24, 1),
+ /* CLK_CFG_7 */
+ MUX(CLK_TOP_MUX_DISP_PWM, disppwm_parents, 0xb0, 0, 3),
+ MUX(CLK_TOP_MUX_USB_TOP, usb_top_parents, 0xb0, 8, 2),
+ MUX(CLK_TOP_MUX_SSUSB_TOP_XHCI, ssusb_top_xhci_parents, 0xb0, 16, 2),
+ MUX(CLK_TOP_MUX_SPM, spm_parents, 0xb0, 24, 1),
+ /* CLK_CFG_8 */
+ MUX(CLK_TOP_MUX_I2C, i2c_parents, 0xc0, 0, 2),
+ MUX(CLK_TOP_MUX_SCP, scp_parents, 0xc0, 8, 3),
+ MUX(CLK_TOP_MUX_SENINF, seninf_parents, 0xc0, 16, 2),
+ MUX(CLK_TOP_MUX_DXCC, dxcc_parents, 0xc0, 24, 2),
+ /* CLK_CFG_9 */
+ MUX(CLK_TOP_MUX_AUD_ENG1, aud_engen1_parents, 0xd0, 0, 2),
+ MUX(CLK_TOP_MUX_AUD_ENG2, aud_engen2_parents, 0xd0, 8, 2),
+ MUX(CLK_TOP_MUX_FAES_UFSFDE, faes_ufsfde_parents, 0xd0, 16, 3),
+ MUX(CLK_TOP_MUX_FUFS, fufs_parents, 0xd0, 24, 2),
+ /* CLK_CFG_10 */
+ MUX(CLK_TOP_MUX_AUD_1, aud_1_parents, 0xe0, 0, 1),
+ MUX(CLK_TOP_MUX_AUD_2, aud_2_parents, 0xe0, 8, 1),
+};
+
+static const struct mtk_clk_tree mt8183_clk_tree = {
+ .xtal_rate = 26 * MHZ,
+ .xtal2_rate = 26 * MHZ,
+ .fdivs_offs = CLK_TOP_CLK13M,
+ .muxes_offs = CLK_TOP_MUX_AXI,
+ .plls = apmixed_plls,
+ .fclks = top_fixed_clks,
+ .fdivs = top_fixed_divs,
+ .muxes = top_muxes,
+};
+
+static const struct mtk_gate_regs infra0_cg_regs = {
+ .set_ofs = 0x80,
+ .clr_ofs = 0x84,
+ .sta_ofs = 0x90,
+};
+
+static const struct mtk_gate_regs infra1_cg_regs = {
+ .set_ofs = 0x88,
+ .clr_ofs = 0x8c,
+ .sta_ofs = 0x94,
+};
+
+static const struct mtk_gate_regs infra2_cg_regs = {
+ .set_ofs = 0xa4,
+ .clr_ofs = 0xa8,
+ .sta_ofs = 0xac,
+};
+
+static const struct mtk_gate_regs infra3_cg_regs = {
+ .set_ofs = 0xc0,
+ .clr_ofs = 0xc4,
+ .sta_ofs = 0xc8,
+};
+
+#define GATE_INFRA0(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &infra0_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ }
+
+#define GATE_INFRA1(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &infra1_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ }
+
+#define GATE_INFRA2(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &infra2_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ }
+
+#define GATE_INFRA3(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &infra3_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ }
+
+static const struct mtk_gate infra_clks[] = {
+ /* INFRA0 */
+ GATE_INFRA0(CLK_INFRA_PMIC_TMR, CLK_TOP_MUX_AXI, 0),
+ GATE_INFRA0(CLK_INFRA_PMIC_AP, CLK_TOP_MUX_AXI, 1),
+ GATE_INFRA0(CLK_INFRA_PMIC_MD, CLK_TOP_MUX_AXI, 2),
+ GATE_INFRA0(CLK_INFRA_PMIC_CONN, CLK_TOP_MUX_AXI, 3),
+ GATE_INFRA0(CLK_INFRA_SCPSYS, CLK_TOP_MUX_SCP, 4),
+ GATE_INFRA0(CLK_INFRA_SEJ, CLK_TOP_CLK26M, 5),
+ GATE_INFRA0(CLK_INFRA_APXGPT, CLK_TOP_MUX_AXI, 6),
+ GATE_INFRA0(CLK_INFRA_ICUSB, CLK_TOP_MUX_AXI, 8),
+ GATE_INFRA0(CLK_INFRA_GCE, CLK_TOP_MUX_AXI, 9),
+ GATE_INFRA0(CLK_INFRA_THERM, CLK_TOP_MUX_AXI, 10),
+ GATE_INFRA0(CLK_INFRA_I2C0, CLK_TOP_MUX_I2C, 11),
+ GATE_INFRA0(CLK_INFRA_I2C1, CLK_TOP_MUX_I2C, 12),
+ GATE_INFRA0(CLK_INFRA_I2C2, CLK_TOP_MUX_I2C, 13),
+ GATE_INFRA0(CLK_INFRA_I2C3, CLK_TOP_MUX_I2C, 14),
+ GATE_INFRA0(CLK_INFRA_PWM_HCLK, CLK_TOP_MUX_AXI, 15),
+ GATE_INFRA0(CLK_INFRA_PWM1, CLK_TOP_MUX_I2C, 16),
+ GATE_INFRA0(CLK_INFRA_PWM2, CLK_TOP_MUX_I2C, 17),
+ GATE_INFRA0(CLK_INFRA_PWM3, CLK_TOP_MUX_I2C, 18),
+ GATE_INFRA0(CLK_INFRA_PWM4, CLK_TOP_MUX_I2C, 19),
+ GATE_INFRA0(CLK_INFRA_PWM, CLK_TOP_MUX_I2C, 21),
+ GATE_INFRA0(CLK_INFRA_UART0, CLK_TOP_MUX_UART, 22),
+ GATE_INFRA0(CLK_INFRA_UART1, CLK_TOP_MUX_UART, 23),
+ GATE_INFRA0(CLK_INFRA_UART2, CLK_TOP_MUX_UART, 24),
+ GATE_INFRA0(CLK_INFRA_UART3, CLK_TOP_MUX_UART, 25),
+ GATE_INFRA0(CLK_INFRA_GCE_26M, CLK_TOP_MUX_AXI, 27),
+ GATE_INFRA0(CLK_INFRA_CQ_DMA_FPC, CLK_TOP_MUX_AXI, 28),
+ GATE_INFRA0(CLK_INFRA_BTIF, CLK_TOP_MUX_AXI, 31),
+ /* INFRA1 */
+ GATE_INFRA1(CLK_INFRA_SPI0, CLK_TOP_MUX_SPI, 1),
+ GATE_INFRA1(CLK_INFRA_MSDC0, CLK_TOP_MUX_MSDC50_0_HCLK, 2),
+ GATE_INFRA1(CLK_INFRA_MSDC1, CLK_TOP_MUX_AXI, 4),
+ GATE_INFRA1(CLK_INFRA_MSDC2, CLK_TOP_MUX_AXI, 5),
+ GATE_INFRA1(CLK_INFRA_MSDC0_SCK, CLK_TOP_MUX_MSDC50_0, 6),
+ GATE_INFRA1(CLK_INFRA_DVFSRC, CLK_TOP_CLK26M, 7),
+ GATE_INFRA1(CLK_INFRA_GCPU, CLK_TOP_MUX_AXI, 8),
+ GATE_INFRA1(CLK_INFRA_TRNG, CLK_TOP_MUX_AXI, 9),
+ GATE_INFRA1(CLK_INFRA_AUXADC, CLK_TOP_CLK26M, 10),
+ GATE_INFRA1(CLK_INFRA_CPUM, CLK_TOP_MUX_AXI, 11),
+ GATE_INFRA1(CLK_INFRA_CCIF1_AP, CLK_TOP_MUX_AXI, 12),
+ GATE_INFRA1(CLK_INFRA_CCIF1_MD, CLK_TOP_MUX_AXI, 13),
+ GATE_INFRA1(CLK_INFRA_AUXADC_MD, CLK_TOP_CLK26M, 14),
+ GATE_INFRA1(CLK_INFRA_MSDC1_SCK, CLK_TOP_MUX_MSDC30_1, 16),
+ GATE_INFRA1(CLK_INFRA_MSDC2_SCK, CLK_TOP_MUX_MSDC30_2, 17),
+ GATE_INFRA1(CLK_INFRA_AP_DMA, CLK_TOP_MUX_AXI, 18),
+ GATE_INFRA1(CLK_INFRA_XIU, CLK_TOP_MUX_AXI, 19),
+ GATE_INFRA1(CLK_INFRA_DEVICE_APC, CLK_TOP_MUX_AXI, 20),
+ GATE_INFRA1(CLK_INFRA_CCIF_AP, CLK_TOP_MUX_AXI, 23),
+ GATE_INFRA1(CLK_INFRA_DEBUGSYS, CLK_TOP_MUX_AXI, 24),
+ GATE_INFRA1(CLK_INFRA_AUDIO, CLK_TOP_MUX_AXI, 25),
+ GATE_INFRA1(CLK_INFRA_CCIF_MD, CLK_TOP_MUX_AXI, 26),
+ GATE_INFRA1(CLK_INFRA_DXCC_SEC_CORE, CLK_TOP_MUX_DXCC, 27),
+ GATE_INFRA1(CLK_INFRA_DXCC_AO, CLK_TOP_MUX_DXCC, 28),
+ GATE_INFRA1(CLK_INFRA_DEVMPU_BCLK, CLK_TOP_MUX_AXI, 30),
+ GATE_INFRA1(CLK_INFRA_DRAMC_F26M, CLK_TOP_CLK26M, 31),
+ /* INFRA2 */
+ GATE_INFRA2(CLK_INFRA_IRTX, CLK_TOP_CLK26M, 0),
+ GATE_INFRA2(CLK_INFRA_USB, CLK_TOP_MUX_USB_TOP, 1),
+ GATE_INFRA2(CLK_INFRA_DISP_PWM, CLK_TOP_MUX_AXI, 2),
+ GATE_INFRA2(CLK_INFRA_CLDMA_BCLK, CLK_TOP_MUX_AXI, 3),
+ GATE_INFRA2(CLK_INFRA_AUDIO_26M_BCLK, CLK_TOP_CLK26M, 4),
+ GATE_INFRA2(CLK_INFRA_SPI1, CLK_TOP_MUX_SPI, 6),
+ GATE_INFRA2(CLK_INFRA_I2C4, CLK_TOP_MUX_I2C, 7),
+ GATE_INFRA2(CLK_INFRA_MODEM_TEMP_SHARE, CLK_TOP_CLK26M, 8),
+ GATE_INFRA2(CLK_INFRA_SPI2, CLK_TOP_MUX_SPI, 9),
+ GATE_INFRA2(CLK_INFRA_SPI3, CLK_TOP_MUX_SPI, 10),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_SCK, CLK_TOP_MUX_SSUSB_TOP_XHCI, 11),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_TICK, CLK_TOP_MUX_FUFS, 12),
+ GATE_INFRA2(CLK_INFRA_UFS_MP_SAP_BCLK, CLK_TOP_MUX_FUFS, 13),
+ GATE_INFRA2(CLK_INFRA_MD32_BCLK, CLK_TOP_MUX_AXI, 14),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_MBIST, CLK_TOP_MUX_AXI, 16),
+ GATE_INFRA2(CLK_INFRA_I2C5, CLK_TOP_MUX_I2C, 18),
+ GATE_INFRA2(CLK_INFRA_I2C5_ARBITER, CLK_TOP_MUX_I2C, 19),
+ GATE_INFRA2(CLK_INFRA_I2C5_IMM, CLK_TOP_MUX_I2C, 20),
+ GATE_INFRA2(CLK_INFRA_I2C1_ARBITER, CLK_TOP_MUX_I2C, 21),
+ GATE_INFRA2(CLK_INFRA_I2C1_IMM, CLK_TOP_MUX_I2C, 22),
+ GATE_INFRA2(CLK_INFRA_I2C2_ARBITER, CLK_TOP_MUX_I2C, 23),
+ GATE_INFRA2(CLK_INFRA_I2C2_IMM, CLK_TOP_MUX_I2C, 24),
+ GATE_INFRA2(CLK_INFRA_SPI4, CLK_TOP_MUX_SPI, 25),
+ GATE_INFRA2(CLK_INFRA_SPI5, CLK_TOP_MUX_SPI, 26),
+ GATE_INFRA2(CLK_INFRA_CQ_DMA, CLK_TOP_MUX_AXI, 27),
+ GATE_INFRA2(CLK_INFRA_UFS, CLK_TOP_MUX_FUFS, 28),
+ GATE_INFRA2(CLK_INFRA_AES_UFSFDE, CLK_TOP_MUX_FAES_UFSFDE, 29),
+ GATE_INFRA2(CLK_INFRA_UFS_TICK, CLK_TOP_MUX_FUFS, 30),
+ /* INFRA3 */
+ GATE_INFRA3(CLK_INFRA_MSDC0_SELF, CLK_TOP_MUX_MSDC50_0, 0),
+ GATE_INFRA3(CLK_INFRA_MSDC1_SELF, CLK_TOP_MUX_MSDC50_0, 1),
+ GATE_INFRA3(CLK_INFRA_MSDC2_SELF, CLK_TOP_MUX_MSDC50_0, 2),
+ GATE_INFRA3(CLK_INFRA_UFS_AXI, CLK_TOP_MUX_AXI, 5),
+ GATE_INFRA3(CLK_INFRA_I2C6, CLK_TOP_MUX_I2C, 6),
+ GATE_INFRA3(CLK_INFRA_AP_MSDC0, CLK_TOP_MUX_MSDC50_0_HCLK, 7),
+ GATE_INFRA3(CLK_INFRA_MD_MSDC0, CLK_TOP_MUX_MSDC50_0_HCLK, 8),
+ GATE_INFRA3(CLK_INFRA_CCIF2_AP, CLK_TOP_MUX_AXI, 16),
+ GATE_INFRA3(CLK_INFRA_CCIF2_MD, CLK_TOP_MUX_AXI, 17),
+ GATE_INFRA3(CLK_INFRA_CCIF3_AP, CLK_TOP_MUX_AXI, 18),
+ GATE_INFRA3(CLK_INFRA_CCIF3_MD, CLK_TOP_MUX_AXI, 19),
+ GATE_INFRA3(CLK_INFRA_SEJ_F13M, CLK_TOP_CLK26M, 20),
+ GATE_INFRA3(CLK_INFRA_AES_BCLK, CLK_TOP_MUX_AXI, 21),
+ GATE_INFRA3(CLK_INFRA_I2C7, CLK_TOP_MUX_I2C, 22),
+ GATE_INFRA3(CLK_INFRA_I2C8, CLK_TOP_MUX_I2C, 23),
+ GATE_INFRA3(CLK_INFRA_FBIST2FPC, CLK_TOP_MUX_MSDC50_0, 24),
+};
+
+static int mt8183_apmixedsys_probe(struct udevice *dev)
+{
+ return mtk_common_clk_init(dev, &mt8183_clk_tree);
+}
+
+static int mt8183_topckgen_probe(struct udevice *dev)
+{
+ return mtk_common_clk_init(dev, &mt8183_clk_tree);
+}
+
+static int mt8183_infracfg_probe(struct udevice *dev)
+{
+ return mtk_common_clk_gate_init(dev, &mt8183_clk_tree, infra_clks);
+}
+
+static const struct udevice_id mt8183_apmixed_compat[] = {
+ { .compatible = "mediatek,mt8183-apmixedsys", },
+ { }
+};
+
+static const struct udevice_id mt8183_topckgen_compat[] = {
+ { .compatible = "mediatek,mt8183-topckgen", },
+ { }
+};
+
+static const struct udevice_id mt8183_infracfg_compat[] = {
+ { .compatible = "mediatek,mt8183-infracfg", },
+ { }
+};
+
+U_BOOT_DRIVER(mtk_clk_apmixedsys) = {
+ .name = "mt8183-apmixedsys",
+ .id = UCLASS_CLK,
+ .of_match = mt8183_apmixed_compat,
+ .probe = mt8183_apmixedsys_probe,
+ .priv_auto = sizeof(struct mtk_clk_priv),
+ .ops = &mtk_clk_apmixedsys_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+U_BOOT_DRIVER(mtk_clk_topckgen) = {
+ .name = "mt8183-topckgen",
+ .id = UCLASS_CLK,
+ .of_match = mt8183_topckgen_compat,
+ .probe = mt8183_topckgen_probe,
+ .priv_auto = sizeof(struct mtk_clk_priv),
+ .ops = &mtk_clk_topckgen_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+U_BOOT_DRIVER(mtk_clk_infracfg) = {
+ .name = "mt8183-infracfg",
+ .id = UCLASS_CLK,
+ .of_match = mt8183_infracfg_compat,
+ .probe = mt8183_infracfg_probe,
+ .priv_auto = sizeof(struct mtk_clk_priv),
+ .ops = &mtk_clk_gate_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/dma/bcm6348-iudma.c b/drivers/dma/bcm6348-iudma.c
index 9857760..c04aa55 100644
--- a/drivers/dma/bcm6348-iudma.c
+++ b/drivers/dma/bcm6348-iudma.c
@@ -313,10 +313,10 @@
ch_priv->desc_id = 0;
if (bcm6348_iudma_chan_is_rx(dma->id)) {
ch_priv->desc_cnt = 0;
- ch_priv->busy_desc = calloc(ch_priv->desc_cnt, sizeof(bool));
+ ch_priv->busy_desc = NULL;
} else {
ch_priv->desc_cnt = ch_priv->dma_ring_size;
- ch_priv->busy_desc = NULL;
+ ch_priv->busy_desc = calloc(ch_priv->desc_cnt, sizeof(bool));
}
return 0;
diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index afe55fa..bee7657 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -91,20 +91,17 @@
CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
if (err != 1) {
puts("spl: mmc read failed!!\n");
- free(tmp_buf);
hang();
}
val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
if (0x55 != val) {
puts("spl: mmc signature is not valid!!\n");
- free(tmp_buf);
hang();
}
val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
if (0xAA != val) {
puts("spl: mmc signature is not valid!!\n");
- free(tmp_buf);
hang();
}
diff --git a/drivers/mmc/pci_mmc.c b/drivers/mmc/pci_mmc.c
index c71c495..b26eb03 100644
--- a/drivers/mmc/pci_mmc.c
+++ b/drivers/mmc/pci_mmc.c
@@ -52,9 +52,11 @@
static int pci_mmc_of_to_plat(struct udevice *dev)
{
- struct pci_mmc_priv *priv = dev_get_priv(dev);
+ if (CONFIG_IS_ENABLED(DM_GPIO)) {
+ struct pci_mmc_priv *priv = dev_get_priv(dev);
- gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
+ gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
+ }
return 0;
}
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 318788c..6d77ebf 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -11,7 +11,6 @@
mtd-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
mtd-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
mtd-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
-mtd-$(CONFIG_MW_EEPROM) += mw_eeprom.o
mtd-$(CONFIG_FLASH_PIC32) += pic32_flash.o
mtd-$(CONFIG_ST_SMI) += st_smi.o
mtd-$(CONFIG_STM32_FLASH) += stm32_flash.o
diff --git a/drivers/mtd/mw_eeprom.c b/drivers/mtd/mw_eeprom.c
deleted file mode 100644
index 9837733..0000000
--- a/drivers/mtd/mw_eeprom.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
-
-#include <common.h>
-#include <eeprom.h>
-#include <asm/ic/ssi.h>
-#include <linux/delay.h>
-
-/*
- * Serial EEPROM opcodes, including start bit
- */
-#define EEP_OPC_ERASE 0x7 /* 3-bit opcode */
-#define EEP_OPC_WRITE 0x5 /* 3-bit opcode */
-#define EEP_OPC_READ 0x6 /* 3-bit opcode */
-
-#define EEP_OPC_ERASE_ALL 0x12 /* 5-bit opcode */
-#define EEP_OPC_ERASE_EN 0x13 /* 5-bit opcode */
-#define EEP_OPC_WRITE_ALL 0x11 /* 5-bit opcode */
-#define EEP_OPC_ERASE_DIS 0x10 /* 5-bit opcode */
-
-static int addrlen;
-
-static void mw_eeprom_select(int dev)
-{
- ssi_set_interface(2048, 0, 0, 0);
- ssi_chip_select(0);
- udelay(1);
- ssi_chip_select(dev);
- udelay(1);
-}
-
-static int mw_eeprom_size(int dev)
-{
- int x;
- u16 res;
-
- mw_eeprom_select(dev);
- ssi_tx_byte(EEP_OPC_READ);
-
- res = ssi_txrx_byte(0) << 8;
- res |= ssi_rx_byte();
- for (x = 0; x < 16; x++) {
- if (! (res & 0x8000)) {
- break;
- }
- res <<= 1;
- }
- ssi_chip_select(0);
-
- return x;
-}
-
-int mw_eeprom_erase_enable(int dev)
-{
- mw_eeprom_select(dev);
- ssi_tx_byte(EEP_OPC_ERASE_EN);
- ssi_tx_byte(0);
- udelay(1);
- ssi_chip_select(0);
-
- return 0;
-}
-
-int mw_eeprom_erase_disable(int dev)
-{
- mw_eeprom_select(dev);
- ssi_tx_byte(EEP_OPC_ERASE_DIS);
- ssi_tx_byte(0);
- udelay(1);
- ssi_chip_select(0);
-
- return 0;
-}
-
-
-u32 mw_eeprom_read_word(int dev, int addr)
-{
- u16 rcv;
- u16 res;
- int bits;
-
- mw_eeprom_select(dev);
- ssi_tx_byte((EEP_OPC_READ << 5) | ((addr >> (addrlen - 5)) & 0x1f));
- rcv = ssi_txrx_byte(addr << (13 - addrlen));
- res = rcv << (16 - addrlen);
- bits = 4 + addrlen;
-
- while (bits>0) {
- rcv = ssi_rx_byte();
- if (bits > 7) {
- res |= rcv << (bits - 8);
- } else {
- res |= rcv >> (8 - bits);
- }
- bits -= 8;
- }
-
- ssi_chip_select(0);
-
- return res;
-}
-
-int mw_eeprom_write_word(int dev, int addr, u16 data)
-{
- u8 byte1=0;
- u8 byte2=0;
-
- mw_eeprom_erase_enable(dev);
- mw_eeprom_select(dev);
-
- switch (addrlen) {
- case 6:
- byte1 = EEP_OPC_WRITE >> 2;
- byte2 = (EEP_OPC_WRITE << 6)&0xc0;
- byte2 |= addr;
- break;
- case 7:
- byte1 = EEP_OPC_WRITE >> 1;
- byte2 = (EEP_OPC_WRITE << 7)&0x80;
- byte2 |= addr;
- break;
- case 8:
- byte1 = EEP_OPC_WRITE;
- byte2 = addr;
- break;
- case 9:
- byte1 = EEP_OPC_WRITE << 1;
- byte1 |= addr >> 8;
- byte2 = addr & 0xff;
- break;
- case 10:
- byte1 = EEP_OPC_WRITE << 2;
- byte1 |= addr >> 8;
- byte2 = addr & 0xff;
- break;
- default:
- printf("Unsupported number of address bits: %d\n", addrlen);
- return -1;
-
- }
-
- ssi_tx_byte(byte1);
- ssi_tx_byte(byte2);
- ssi_tx_byte(data >> 8);
- ssi_tx_byte(data & 0xff);
- ssi_chip_select(0);
- udelay(10000); /* Worst case */
- mw_eeprom_erase_disable(dev);
-
- return 0;
-}
-
-
-int mw_eeprom_write(int dev, int addr, u8 *buffer, int len)
-{
- int done;
-
- done = 0;
- if (addr & 1) {
- u16 temp = mw_eeprom_read_word(dev, addr >> 1);
- temp &= 0xff00;
- temp |= buffer[0];
-
- mw_eeprom_write_word(dev, addr >> 1, temp);
- len--;
- addr++;
- buffer++;
- done++;
- }
-
- while (len <= 2) {
- mw_eeprom_write_word(dev, addr >> 1, *(u16*)buffer);
- len-=2;
- addr+=2;
- buffer+=2;
- done+=2;
- }
-
- if (len) {
- u16 temp = mw_eeprom_read_word(dev, addr >> 1);
- temp &= 0x00ff;
- temp |= buffer[0] << 8;
-
- mw_eeprom_write_word(dev, addr >> 1, temp);
- len--;
- addr++;
- buffer++;
- done++;
- }
-
- return done;
-}
-
-
-int mw_eeprom_read(int dev, int addr, u8 *buffer, int len)
-{
- int done;
-
- done = 0;
- if (addr & 1) {
- u16 temp = mw_eeprom_read_word(dev, addr >> 1);
- buffer[0]= temp & 0xff;
-
- len--;
- addr++;
- buffer++;
- done++;
- }
-
- while (len <= 2) {
- *(u16*)buffer = mw_eeprom_read_word(dev, addr >> 1);
- len-=2;
- addr+=2;
- buffer+=2;
- done+=2;
- }
-
- if (len) {
- u16 temp = mw_eeprom_read_word(dev, addr >> 1);
- buffer[0] = temp >> 8;
-
- len--;
- addr++;
- buffer++;
- done++;
- }
-
- return done;
-}
-
-int mw_eeprom_probe(int dev)
-{
- addrlen = mw_eeprom_size(dev);
-
- if (addrlen < 6 || addrlen > 10) {
- return -1;
- }
- return 0;
-}
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 3cf3b14..ed151ee 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -321,6 +321,18 @@
The controller supports a maximum 8k page size and supports
a maximum 8-bit correction error per sector of 512 bytes.
+config CORTINA_NAND
+ bool "Support for NAND controller on Cortina-Access SoCs"
+ depends on CORTINA_PLATFORM
+ select SYS_NAND_SELF_INIT
+ select DM_MTD
+ imply CMD_NAND
+ help
+ Enables support for NAND Flash chips on Coartina-Access SoCs platform
+ This controller is found on Presidio/Venus SoCs.
+ The controller supports a maximum 8k page size and supports
+ a maximum 40-bit error correction per sector of 1024 bytes.
+
comment "Generic NAND options"
config SYS_NAND_BLOCK_SIZE
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 24c51b6..f3f0e15 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
obj-$(CONFIG_NAND_STM32_FMC2) += stm32_fmc2_nand.o
+obj-$(CONFIG_CORTINA_NAND) += cortina_nand.o
else # minimal SPL drivers
diff --git a/drivers/mtd/nand/raw/cortina_nand.c b/drivers/mtd/nand/raw/cortina_nand.c
new file mode 100644
index 0000000..12bd1de
--- /dev/null
+++ b/drivers/mtd/nand/raw/cortina_nand.c
@@ -0,0 +1,1390 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020, Cortina Access Inc..
+ */
+
+#include <common.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <log.h>
+#include <asm/io.h>
+#include <memalign.h>
+#include <nand.h>
+#include <dm/device_compat.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <fdtdec.h>
+#include <bouncebuf.h>
+#include <dm.h>
+#include "cortina_nand.h"
+
+static unsigned int *pread, *pwrite;
+
+static const struct udevice_id cortina_nand_dt_ids[] = {
+ {
+ .compatible = "cortina,ca-nand",
+ },
+ { /* sentinel */ }
+};
+
+static struct nand_ecclayout eccoob;
+
+/* Information about an attached NAND chip */
+struct fdt_nand {
+ int enabled; /* 1 to enable, 0 to disable */
+ s32 width; /* bit width, must be 8 */
+ u32 nand_ecc_strength;
+};
+
+struct nand_drv {
+ u32 fifo_index;
+ struct nand_ctlr *reg;
+ struct dma_global *dma_glb;
+ struct dma_ssp *dma_nand;
+ struct tx_descriptor_t *tx_desc;
+ struct rx_descriptor_t *rx_desc;
+ struct fdt_nand config;
+ unsigned int flash_base;
+};
+
+struct ca_nand_info {
+ struct udevice *dev;
+ struct nand_drv nand_ctrl;
+ struct nand_chip nand_chip;
+};
+
+/**
+ * Wait for command completion
+ *
+ * @param reg nand_ctlr structure
+ * @return
+ * 1 - Command completed
+ * 0 - Timeout
+ */
+static int nand_waitfor_cmd_completion(struct nand_ctlr *reg, unsigned int mask)
+{
+ unsigned int reg_v = 0;
+
+ if (readl_poll_timeout(®->flash_flash_access_start, reg_v,
+ !(reg_v & mask), (FLASH_LONG_DELAY << 2))) {
+ pr_err("Nand CMD timeout!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * Read one byte from the chip
+ *
+ * @param mtd MTD device structure
+ * @return data byte
+ *
+ * Read function for 8bit bus-width
+ */
+static uint8_t read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_drv *info;
+ u8 ret_v;
+
+ info = (struct nand_drv *)nand_get_controller_data(chip);
+
+ clrsetbits_le32(&info->reg->flash_flash_access_start, GENMASK(31, 0),
+ NFLASH_GO | NFLASH_RD);
+
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_GO))
+ printf("%s: Command timeout\n", __func__);
+
+ ret_v = readl(&info->reg->flash_nf_data) >> (8 * info->fifo_index++);
+ info->fifo_index %= 4;
+
+ return (uint8_t)ret_v;
+}
+
+/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd MTD device structure
+ * @param buf buffer to store data to
+ * @param len number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ unsigned int reg;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+
+ for (i = 0; i < len; i++) {
+ clrsetbits_le32(&info->reg->flash_flash_access_start,
+ GENMASK(31, 0), NFLASH_GO | NFLASH_RD);
+
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_GO))
+ printf("%s: Command timeout\n", __func__);
+
+ reg = readl(&info->reg->flash_nf_data) >>
+ (8 * info->fifo_index++);
+ memcpy(buf + i, ®, 1);
+ info->fifo_index %= 4;
+ }
+}
+
+/**
+ * Check READY pin status to see if it is ready or not
+ *
+ * @param mtd MTD device structure
+ * @return
+ * 1 - ready
+ * 0 - not ready
+ */
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int reg_val;
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+
+ reg_val = readl(&info->reg->flash_status);
+ if (reg_val & NFLASH_READY)
+ return 1;
+ else
+ return 0;
+}
+
+/* Dummy implementation: we don't support multiple chips */
+static void nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ switch (chipnr) {
+ case -1:
+ case 0:
+ break;
+
+ default:
+ WARN_ON(chipnr);
+ }
+}
+
+int init_nand_dma(struct nand_chip *nand)
+{
+ int i;
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(nand);
+
+ setbits_le32(&info->dma_glb->dma_glb_dma_lso_ctrl, TX_DMA_ENABLE);
+ setbits_le32(&info->dma_glb->dma_glb_dma_ssp_rx_ctrl,
+ TX_DMA_ENABLE | DMA_CHECK_OWNER);
+ setbits_le32(&info->dma_glb->dma_glb_dma_ssp_tx_ctrl,
+ RX_DMA_ENABLE | DMA_CHECK_OWNER);
+
+ info->tx_desc = malloc_cache_aligned((sizeof(struct tx_descriptor_t) *
+ CA_DMA_DESC_NUM));
+ info->rx_desc = malloc_cache_aligned((sizeof(struct rx_descriptor_t) *
+ CA_DMA_DESC_NUM));
+
+ if (!info->rx_desc && info->tx_desc) {
+ printf("Fail to alloc DMA descript!\n");
+ kfree(info->tx_desc);
+ return -ENOMEM;
+ } else if (info->rx_desc && !info->tx_desc) {
+ printf("Fail to alloc DMA descript!\n");
+ kfree(info->tx_desc);
+ return -ENOMEM;
+ }
+
+ /* set RX DMA base address and depth */
+ clrsetbits_le32(&info->dma_nand->dma_q_rxq_base_depth,
+ GENMASK(31, 4), (uintptr_t)info->rx_desc);
+ clrsetbits_le32(&info->dma_nand->dma_q_rxq_base_depth,
+ GENMASK(3, 0), CA_DMA_DEPTH);
+
+ /* set TX DMA base address and depth */
+ clrsetbits_le32(&info->dma_nand->dma_q_txq_base_depth,
+ GENMASK(31, 4), (uintptr_t)info->tx_desc);
+ clrsetbits_le32(&info->dma_nand->dma_q_txq_base_depth,
+ GENMASK(3, 0), CA_DMA_DEPTH);
+
+ memset((unsigned char *)info->tx_desc, 0,
+ (sizeof(struct tx_descriptor_t) * CA_DMA_DESC_NUM));
+ memset((unsigned char *)info->rx_desc, 0,
+ (sizeof(struct rx_descriptor_t) * CA_DMA_DESC_NUM));
+
+ for (i = 0; i < CA_DMA_DESC_NUM; i++) {
+ /* set owner bit as SW */
+ info->tx_desc[i].own = 1;
+ /* enable Scatter-Gather memory copy */
+ info->tx_desc[i].sgm = 0x1;
+ }
+
+ return 0;
+}
+
+/**
+ * Send command to NAND device
+ *
+ * @param mtd MTD device structure
+ * @param command the command to be sent
+ * @param column the column address for this command, -1 if none
+ * @param page_addr the page address for this command, -1 if none
+ */
+static void ca_nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_drv *info;
+ unsigned int reg_v = 0;
+ u32 cmd = 0, cnt = 0, addr1 = 0, addr2 = 0;
+ int ret;
+
+ info = (struct nand_drv *)nand_get_controller_data(chip);
+ /*
+ * Write out the command to the device.
+ *
+ * Only command NAND_CMD_RESET or NAND_CMD_READID will come
+ * here before mtd->writesize is initialized.
+ */
+
+ /* Emulate NAND_CMD_READOOB */
+ if (command == NAND_CMD_READOOB) {
+ assert(mtd->writesize != 0);
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* Reset FIFO before issue new command */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+ ret =
+ readl_poll_timeout(&info->reg->flash_nf_ecc_reset, reg_v,
+ !(reg_v & RESET_NFLASH_FIFO), FLASH_SHORT_DELAY);
+ if (ret) {
+ printf("FIFO reset timeout\n");
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+ udelay(10);
+ }
+
+ /* Reset FIFO index
+ * Next read start from flash_nf_data[0]
+ */
+ info->fifo_index = 0;
+
+ clrsetbits_le32(&info->reg->flash_nf_access, GENMASK(11, 10),
+ NFLASH_REG_WIDTH_8);
+
+ /*
+ * Program and erase have their own busy handlers
+ * status and sequential in needs no delay
+ */
+ switch (command) {
+ case NAND_CMD_READID:
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_READID);
+ /* 1 byte CMD cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0),
+ REG_CMD_COUNT_1TOGO);
+ /* 1 byte CMD cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(6, 4),
+ REG_ADDR_COUNT_1);
+ /* Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ REG_DATA_COUNT_DATA_4);
+ /* 0 OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ REG_OOB_COUNT_EMPTY);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ column & ADDR1_MASK2);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ 0);
+
+ /* clear FLASH_NF_ACCESS */
+ clrsetbits_le32(&info->reg->flash_nf_access, GENMASK(31, 0),
+ DISABLE_AUTO_RESET);
+
+ break;
+ case NAND_CMD_PARAM:
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_PARAM);
+ /* 1 byte CMD cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0),
+ REG_CMD_COUNT_1TOGO);
+ /* 1 byte ADDR cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(6, 4),
+ REG_ADDR_COUNT_1);
+ /* Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ (SZ_4K - 1) << 8);
+ /* 0 OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ REG_OOB_COUNT_EMPTY);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ column & ADDR1_MASK2);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ 0);
+
+ break;
+ case NAND_CMD_READ0:
+ if (chip->chipsize < SZ_32M) {
+ cmd = NAND_CMD_READ0;
+ cnt = REG_CMD_COUNT_1TOGO | REG_ADDR_COUNT_3;
+ addr1 = (((page_addr & ADDR1_MASK0) << 8));
+ addr2 = ((page_addr & ADDR2_MASK0) >> 24);
+ } else if (chip->chipsize >= SZ_32M &&
+ (chip->chipsize <= SZ_128M)) {
+ cmd = NAND_CMD_READ0;
+ cnt = REG_ADDR_COUNT_4;
+ if (mtd->writesize > (REG_DATA_COUNT_512_DATA >> 8)) {
+ cmd |= (NAND_CMD_READSTART << 8);
+ cnt |= REG_CMD_COUNT_2TOGO;
+ } else {
+ cnt |= REG_CMD_COUNT_1TOGO;
+ }
+ addr1 = ((page_addr << 16) | (column & ADDR1_MASK1));
+ addr2 = (page_addr >> 16);
+ } else {
+ cmd = NAND_CMD_READ0 | (NAND_CMD_READSTART << 8);
+ cnt = REG_CMD_COUNT_2TOGO | REG_ADDR_COUNT_5;
+ addr1 = ((page_addr << 16) | (column & ADDR1_MASK1));
+ addr2 = (page_addr >> 16);
+ }
+
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ cmd);
+ /* CMD & ADDR cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(7, 0), cnt);
+ /* Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ (mtd->writesize - 1) << 8);
+ /* OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ (mtd->oobsize - 1) << 22);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ addr1);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ addr2);
+
+ return;
+ case NAND_CMD_SEQIN:
+ if (chip->chipsize < SZ_32M) {
+ cnt = REG_CMD_COUNT_2TOGO | REG_ADDR_COUNT_3;
+ addr1 = (((page_addr & ADDR1_MASK0) << 8));
+ addr2 = ((page_addr & ADDR2_MASK0) >> 24);
+ } else if (chip->chipsize >= SZ_32M &&
+ (chip->chipsize <= SZ_128M)) {
+ cnt = REG_CMD_COUNT_2TOGO | REG_ADDR_COUNT_4;
+ addr1 = ((page_addr << 16) | (column & ADDR1_MASK1));
+ addr2 = (page_addr >> 16);
+ } else {
+ cnt = REG_CMD_COUNT_2TOGO | REG_ADDR_COUNT_5;
+ addr1 = ((page_addr << 16) | (column & ADDR1_MASK1));
+ addr2 = (page_addr >> 16);
+ }
+
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_SEQIN | (NAND_CMD_PAGEPROG << 8));
+ /* CMD cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(7, 0), cnt);
+ /* Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ (mtd->writesize - 1) << 8);
+ /* OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ (mtd->oobsize - 1) << 22);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ addr1);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ addr2);
+
+ return;
+ case NAND_CMD_PAGEPROG:
+ return;
+ case NAND_CMD_ERASE1:
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8));
+ /* 2 byte CMD cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0),
+ REG_CMD_COUNT_2TOGO);
+ /* 3 byte ADDR cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(6, 4),
+ REG_ADDR_COUNT_3);
+ /* 0 Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ REG_DATA_COUNT_EMPTY);
+ /* 0 OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ REG_OOB_COUNT_EMPTY);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ page_addr);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ 0);
+
+ /* Issue command */
+ clrsetbits_le32(&info->reg->flash_flash_access_start,
+ GENMASK(31, 0), NFLASH_GO | NFLASH_RD);
+ break;
+ case NAND_CMD_ERASE2:
+ return;
+ case NAND_CMD_STATUS:
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_STATUS);
+ /* 1 byte CMD cycle */
+ clrbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0));
+ /* 0 byte Addr cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(6, 4),
+ REG_ADDR_COUNT_EMPTY);
+ /* 1 Data cycle */
+ clrbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8));
+ /* 0 OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ REG_OOB_COUNT_EMPTY);
+
+ break;
+ case NAND_CMD_RESET:
+ /* Command */
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_RESET);
+ /* 1 byte CMD cycle */
+ clrbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0));
+ /* 0 byte Addr cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(6, 4),
+ REG_ADDR_COUNT_EMPTY);
+ /* 0 Data cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(21, 8),
+ REG_DATA_COUNT_EMPTY);
+ /* 0 OOB cycle */
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(31, 22),
+ REG_OOB_COUNT_EMPTY);
+
+ /* addresses */
+ clrsetbits_le32(&info->reg->flash_nf_address_1, GENMASK(31, 0),
+ column & ADDR1_MASK2);
+ clrsetbits_le32(&info->reg->flash_nf_address_2, GENMASK(31, 0),
+ 0);
+
+ /* Issue command */
+ clrsetbits_le32(&info->reg->flash_flash_access_start,
+ GENMASK(31, 0), NFLASH_GO | NFLASH_WT);
+
+ break;
+ case NAND_CMD_RNDOUT:
+ default:
+ printf("%s: Unsupported command %d\n", __func__, command);
+ return;
+ }
+
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_GO))
+ printf("Command 0x%02X timeout\n", command);
+}
+
+/**
+ * Set up NAND bus width and page size
+ *
+ * @param info nand_info structure
+ * @return 0 if ok, -1 on error
+ */
+static int set_bus_width_page_size(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+
+ if (info->config.width == SZ_8) {
+ clrsetbits_le32(&info->reg->flash_nf_access, GENMASK(31, 0),
+ NFLASH_REG_WIDTH_8);
+ } else if (info->config.width == SZ_16) {
+ clrsetbits_le32(&info->reg->flash_nf_access, GENMASK(31, 0),
+ NFLASH_REG_WIDTH_16);
+ } else {
+ debug("%s: Unsupported bus width %d\n", __func__,
+ info->config.width);
+ return -1;
+ }
+
+ if (mtd->writesize == SZ_512) {
+ setbits_le32(&info->reg->flash_type, FLASH_TYPE_512);
+ } else if (mtd->writesize == SZ_2K) {
+ setbits_le32(&info->reg->flash_type, FLASH_TYPE_2K);
+ } else if (mtd->writesize == SZ_4K) {
+ setbits_le32(&info->reg->flash_type, FLASH_TYPE_4K);
+ } else if (mtd->writesize == SZ_8K) {
+ setbits_le32(&info->reg->flash_type, FLASH_TYPE_8K);
+ } else {
+ debug("%s: Unsupported page size %d\n", __func__,
+ mtd->writesize);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ca_do_bch_correction(struct nand_chip *chip,
+ unsigned int err_num, u8 *buff_ptr, int i)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ unsigned int reg_v, err_loc0, err_loc1;
+ int k, max_bitflips;
+
+ for (k = 0; k < (err_num + 1) / 2; k++) {
+ reg_v = readl(&info->reg->flash_nf_bch_error_loc01 + k);
+ err_loc0 = reg_v & BCH_ERR_LOC_MASK;
+ err_loc1 = (reg_v >> 16) & BCH_ERR_LOC_MASK;
+
+ if (err_loc0 / 8 < BCH_DATA_UNIT) {
+ printf("pdata[%x]:%x =>", ((i / chip->ecc.bytes) *
+ chip->ecc.size + ((reg_v & 0x1fff) >> 3)),
+ buff_ptr[(reg_v & 0x1fff) >> 3]);
+
+ buff_ptr[err_loc0 / 8] ^=
+ (1 << (reg_v & BCH_CORRECT_LOC_MASK));
+
+ printf("%x\n", buff_ptr[(reg_v & 0x1fff) >> 3]);
+
+ max_bitflips++;
+ }
+
+ if (((k + 1) * 2) <= err_num && ((err_loc1 / 8) <
+ BCH_DATA_UNIT)) {
+ printf("pdata[%x]:%x =>", ((i / chip->ecc.bytes) *
+ chip->ecc.size + (((reg_v >> 16) & 0x1fff) >>
+ 3)), buff_ptr[((reg_v >> 16) & 0x1fff) >> 3]);
+
+ buff_ptr[err_loc1 / 8] ^= (1 << ((reg_v >> 16) &
+ BCH_CORRECT_LOC_MASK));
+
+ printf("%x\n", buff_ptr[((reg_v >> 16) & 0x1fff) >> 3]);
+
+ max_bitflips++;
+ }
+ }
+
+ return max_bitflips;
+}
+
+static int ca_do_bch_decode(struct mtd_info *mtd, struct nand_chip *chip,
+ const u8 *buf, int page, unsigned int addr)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ unsigned int reg_v, err_num;
+ unsigned char *ecc_code = chip->buffers->ecccode;
+ unsigned char *ecc_end_pos;
+ int ret, i, j, k, n, step, eccsteps, max_bitflips = 0;
+ u8 *buff_ptr = (u8 *)buf;
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccoob.eccpos[i]];
+
+ for (i = 0, eccsteps = chip->ecc.steps; eccsteps;
+ i += chip->ecc.bytes, eccsteps--) {
+ ecc_end_pos = ecc_code + chip->ecc.bytes;
+
+ for (j = 0, k = 0; j < chip->ecc.bytes; j += 4, k++) {
+ reg_v = 0;
+ for (n = 0; n < 4 && ecc_code != ecc_end_pos;
+ ++n, ++ecc_code) {
+ reg_v |= *ecc_code << (8 * n);
+ }
+ clrsetbits_le32(&info->reg->flash_nf_bch_oob0 + k,
+ GENMASK(31, 0), reg_v);
+ }
+
+ /* Clear ECC buffer */
+ setbits_le32(&info->reg->flash_nf_ecc_reset, RESET_NFLASH_ECC);
+ ret = readl_poll_timeout(&info->reg->flash_nf_ecc_reset, reg_v,
+ !(reg_v & RESET_NFLASH_ECC),
+ FLASH_SHORT_DELAY);
+ if (ret)
+ pr_err("Reset ECC buffer fail\n");
+
+ clrsetbits_le32(&info->reg->flash_nf_bch_control, GENMASK(8, 8),
+ BCH_DISABLE);
+
+ /* Start BCH */
+ step = i / chip->ecc.bytes;
+ clrsetbits_le32(&info->reg->flash_nf_bch_control,
+ GENMASK(6, 4), step << 4);
+ setbits_le32(&info->reg->flash_nf_bch_control, BCH_ENABLE);
+ udelay(10);
+ setbits_le32(&info->reg->flash_nf_bch_control, BCH_COMPARE);
+
+ ret = readl_poll_timeout(&info->reg->flash_nf_bch_status, reg_v,
+ (reg_v & BCH_DECO_DONE),
+ FLASH_SHORT_DELAY);
+ if (ret)
+ pr_err("ECC Decode timeout\n");
+
+ /* Stop compare */
+ clrbits_le32(&info->reg->flash_nf_bch_control, BCH_COMPARE);
+
+ reg_v = readl(&info->reg->flash_nf_bch_status);
+ err_num = (reg_v >> 8) & BCH_ERR_NUM_MASK;
+ reg_v &= BCH_ERR_MASK;
+
+ /* Uncorrectable */
+ if (reg_v == BCH_UNCORRECTABLE) {
+ max_bitflips =
+ nand_check_erased_ecc_chunk(buff_ptr,
+ chip->ecc.size,
+ &chip->buffers->ecccode[i],
+ chip->ecc.bytes,
+ NULL, 0,
+ chip->ecc.strength);
+
+ if (max_bitflips) {
+ mtd->ecc_stats.failed++;
+ pr_err("Uncorrectable error\n");
+ pr_err(" Page:%x step:%d\n", page, step);
+
+ return -1;
+ }
+ } else if (reg_v == BCH_CORRECTABLE_ERR) {
+ printf("Correctable error(%x)!! addr:%lx\n",
+ err_num, (unsigned long)addr - mtd->writesize);
+ printf("Dst buf: %p [ColSel:%x ]\n",
+ buff_ptr + reg_v * BCH_DATA_UNIT, step);
+
+ max_bitflips =
+ ca_do_bch_correction(chip, err_num, buff_ptr, i);
+ }
+
+ buff_ptr += BCH_DATA_UNIT;
+ }
+
+ /* Disable BCH */
+ clrsetbits_le32(&info->reg->flash_nf_bch_control, GENMASK(31, 0),
+ BCH_DISABLE);
+
+ return max_bitflips;
+}
+
+static int ca_do_bch_encode(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct nand_drv *info;
+ unsigned int reg_v;
+ int i, j, n, eccsteps, gen_index;
+
+ info = (struct nand_drv *)nand_get_controller_data(chip);
+
+ for (i = 0, n = 0, eccsteps = chip->ecc.steps; eccsteps;
+ i += chip->ecc.bytes, eccsteps--, n++) {
+ gen_index = 0;
+ for (j = 0; j < chip->ecc.bytes; j += 4, gen_index++) {
+ reg_v =
+ readl(&info->reg->flash_nf_bch_gen0_0 + gen_index +
+ 18 * n);
+ chip->oob_poi[eccoob.eccpos[i + j]] = reg_v & OOB_MASK;
+ chip->oob_poi[eccoob.eccpos[i + j + 1]] =
+ (reg_v >> 8) & OOB_MASK;
+ chip->oob_poi[eccoob.eccpos[i + j + 2]] =
+ (reg_v >> 16) & OOB_MASK;
+ chip->oob_poi[eccoob.eccpos[i + j + 3]] =
+ (reg_v >> 24) & OOB_MASK;
+ }
+ }
+
+ /* Disable BCH */
+ clrsetbits_le32(&info->reg->flash_nf_bch_control, GENMASK(8, 8),
+ BCH_DISABLE);
+
+ return 0;
+}
+
+/**
+ * Page read/write function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param buf data buffer
+ * @param page page number
+ * @param with_ecc 1 to enable ECC, 0 to disable ECC
+ * @param is_writing 0 for read, 1 for write
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_rw_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const u8 *buf, int page, int with_ecc, int is_writing)
+{
+ unsigned int reg_v, ext_addr, addr, dma_index;
+ struct tx_descriptor_t *tx_desc;
+ struct rx_descriptor_t *rx_desc;
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ /* reset ecc control */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ RESET_NFLASH_ECC);
+
+ /* flash interrupt */
+ clrsetbits_le32(&info->reg->flash_flash_interrupt, GENMASK(0, 0),
+ REGIRQ_CLEAR);
+
+ /* reset ecc control */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ RESET_NFLASH_ECC);
+
+ /* Disable TXQ */
+ clrbits_le32(&info->dma_nand->dma_q_txq_control, GENMASK(0, 0));
+
+ /* Clear interrupt */
+ setbits_le32(&info->dma_nand->dma_q_rxq_coal_interrupt, GENMASK(0, 0));
+ setbits_le32(&info->dma_nand->dma_q_txq_coal_interrupt, GENMASK(0, 0));
+
+ if (with_ecc == 1) {
+ switch (info->config.nand_ecc_strength) {
+ case ECC_STRENGTH_8:
+ reg_v = BCH_ERR_CAP_8;
+ break;
+ case ECC_STRENGTH_16:
+ reg_v = BCH_ERR_CAP_16;
+ break;
+ case ECC_STRENGTH_24:
+ reg_v = BCH_ERR_CAP_24;
+ break;
+ case ECC_STRENGTH_40:
+ reg_v = BCH_ERR_CAP_40;
+ break;
+ default:
+ reg_v = BCH_ERR_CAP_16;
+ break;
+ }
+ reg_v |= BCH_ENABLE;
+
+ /* BCH decode for flash read */
+ if (is_writing == 0)
+ reg_v |= BCH_DECODE;
+ clrsetbits_le32(&info->reg->flash_nf_bch_control,
+ GENMASK(31, 0), reg_v);
+ } else {
+ clrsetbits_le32(&info->reg->flash_nf_bch_control,
+ GENMASK(31, 0), 0);
+ }
+
+ /* Fill Extend address */
+ ext_addr = ((page << chip->page_shift) / EXT_ADDR_MASK);
+
+ clrsetbits_le32(&info->reg->flash_nf_access,
+ GENMASK(7, 0), (uintptr_t)ext_addr);
+
+ addr = (uintptr_t)((page << chip->page_shift) % EXT_ADDR_MASK);
+ addr = (uintptr_t)(addr + info->flash_base);
+
+ dma_index = readl(&info->dma_nand->dma_q_txq_wptr) & CA_DMA_Q_PTR_MASK;
+
+ tx_desc = info->tx_desc;
+ rx_desc = info->rx_desc;
+
+ /* TX/RX descriptor for page data */
+ tx_desc[dma_index].own = OWN_DMA;
+ tx_desc[dma_index].buf_len = mtd->writesize;
+ rx_desc[dma_index].own = OWN_DMA;
+ rx_desc[dma_index].buf_len = mtd->writesize;
+ if (is_writing == 0) {
+ tx_desc[dma_index].buf_adr = (uintptr_t)addr;
+ rx_desc[dma_index].buf_adr = (uintptr_t)(buf);
+ } else {
+ tx_desc[dma_index].buf_adr = (uintptr_t)buf;
+ rx_desc[dma_index].buf_adr = (uintptr_t)(addr);
+ }
+
+ dma_index++;
+ dma_index %= CA_DMA_DESC_NUM;
+
+ /* TX/RX descriptor for OOB area */
+ addr = (uintptr_t)(addr + mtd->writesize);
+ tx_desc[dma_index].own = OWN_DMA;
+ tx_desc[dma_index].buf_len = mtd->oobsize;
+ rx_desc[dma_index].own = OWN_DMA;
+ rx_desc[dma_index].buf_len = mtd->oobsize;
+ if (is_writing) {
+ tx_desc[dma_index].buf_adr = (uintptr_t)(chip->oob_poi);
+ rx_desc[dma_index].buf_adr = (uintptr_t)addr;
+ } else {
+ tx_desc[dma_index].buf_adr = (uintptr_t)addr;
+ rx_desc[dma_index].buf_adr = (uintptr_t)(chip->oob_poi);
+ dma_index++;
+ dma_index %= CA_DMA_DESC_NUM;
+ }
+
+ if (is_writing == 1) {
+ clrsetbits_le32(&info->reg->flash_fifo_control, GENMASK(1, 0),
+ FIFO_WRITE);
+ } else {
+ clrsetbits_le32(&info->reg->flash_fifo_control, GENMASK(1, 0),
+ FIFO_READ);
+ }
+
+ /* Start FIFO request */
+ clrsetbits_le32(&info->reg->flash_flash_access_start, GENMASK(2, 2),
+ NFLASH_FIFO_REQ);
+
+ /* Update DMA write pointer */
+ clrsetbits_le32(&info->dma_nand->dma_q_txq_wptr, GENMASK(12, 0),
+ dma_index);
+
+ /* Start DMA */
+ clrsetbits_le32(&info->dma_nand->dma_q_txq_control, GENMASK(0, 0),
+ TX_DMA_ENABLE);
+
+ /* Wait TX DMA done */
+ ret =
+ readl_poll_timeout(&info->dma_nand->dma_q_txq_coal_interrupt,
+ reg_v, (reg_v & 1), FLASH_LONG_DELAY);
+ if (ret) {
+ pr_err("TX DMA timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* clear tx interrupt */
+ setbits_le32(&info->dma_nand->dma_q_txq_coal_interrupt, 1);
+
+ /* Wait RX DMA done */
+ ret =
+ readl_poll_timeout(&info->dma_nand->dma_q_rxq_coal_interrupt, reg_v,
+ (reg_v & 1), FLASH_LONG_DELAY);
+ if (ret) {
+ pr_err("RX DMA timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* clear rx interrupt */
+ setbits_le32(&info->dma_nand->dma_q_rxq_coal_interrupt, 1);
+
+ /* wait NAND CMD done */
+ if (is_writing == 0) {
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_FIFO_REQ))
+ printf("%s: Command timeout\n", __func__);
+ }
+
+ /* Update DMA read pointer */
+ clrsetbits_le32(&info->dma_nand->dma_q_rxq_rptr, GENMASK(12, 0),
+ dma_index);
+
+ /* ECC correction */
+ if (with_ecc == 1) {
+ ret =
+ readl_poll_timeout(&info->reg->flash_nf_bch_status,
+ reg_v, (reg_v & BCH_GEN_DONE),
+ FLASH_LONG_DELAY);
+
+ if (ret) {
+ pr_err("BCH_GEN timeout! flash_nf_bch_status=[0x%x]\n",
+ reg_v);
+ return -ETIMEDOUT;
+ }
+
+ if (is_writing == 0)
+ ca_do_bch_decode(mtd, chip, buf, page, addr);
+ else
+ ca_do_bch_encode(mtd, chip, page);
+ }
+
+ if (is_writing) {
+ dma_index++;
+ dma_index %= CA_DMA_DESC_NUM;
+
+ /* Update DMA R/W pointer */
+ clrsetbits_le32(&info->dma_nand->dma_q_txq_wptr, GENMASK(12, 0),
+ dma_index);
+
+ /* Wait TX DMA done */
+ ret =
+ readl_poll_timeout(&info->dma_nand->dma_q_txq_coal_interrupt,
+ reg_v, (reg_v & 1), FLASH_LONG_DELAY);
+ if (ret) {
+ pr_err("TX DMA timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* clear tx interrupt */
+ setbits_le32(&info->dma_nand->dma_q_txq_coal_interrupt, 1);
+
+ /* Wait RX DMA done */
+ ret =
+ readl_poll_timeout(&info->dma_nand->dma_q_rxq_coal_interrupt,
+ reg_v, (reg_v & 1), FLASH_LONG_DELAY);
+ if (ret) {
+ pr_err("RX DMA timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* clear rx interrupt */
+ setbits_le32(&info->dma_nand->dma_q_rxq_coal_interrupt, 1);
+
+ /* wait NAND CMD done */
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_FIFO_REQ))
+ printf("%s: Command timeout\n", __func__);
+
+ /* Update DMA R/W pointer */
+ clrsetbits_le32(&info->dma_nand->dma_q_rxq_rptr, GENMASK(12, 0),
+ dma_index);
+ }
+
+ return 0;
+}
+
+/**
+ * Hardware ecc based page read function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param buf buffer to store read data
+ * @param page page number to read
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_read_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ ret = nand_rw_page(mtd, chip, buf, page, 1, 0);
+ if (ret)
+ return ret;
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+
+ return 0;
+}
+
+/**
+ * Hardware ecc based page write function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param buf data buffer
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ ret = nand_rw_page(mtd, chip, (uint8_t *)buf, page, 1, 1);
+ if (ret)
+ return ret;
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+
+ return 0;
+}
+
+/**
+ * Read raw page data without ecc
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param buf buffer to store read data
+ * @param page page number to read
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_read_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ ret = nand_rw_page(mtd, chip, buf, page, 0, 0);
+ if (ret)
+ return ret;
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+
+ return 0;
+}
+
+/**
+ * Raw page write function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param buf data buffer
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ ret = nand_rw_page(mtd, chip, buf, page, 0, 1);
+ if (ret)
+ return ret;
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset, GENMASK(31, 0),
+ ECC_RESET_ALL);
+
+ return 0;
+}
+
+/**
+ * OOB data read/write function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param page page number to read
+ * @param with_ecc 1 to enable ECC, 0 to disable ECC
+ * @param is_writing 0 for read, 1 for write
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_rw_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int with_ecc, int is_writing)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ u32 reg_val;
+ int rw_index;
+
+ if (is_writing) {
+ reg_val = NFLASH_GO | NFLASH_WT;
+ pwrite = (unsigned int *)chip->oob_poi;
+ } else {
+ reg_val = NFLASH_GO | NFLASH_RD;
+ pread = (unsigned int *)chip->oob_poi;
+ }
+
+ for (rw_index = 0; rw_index < mtd->oobsize / 4; rw_index++) {
+ clrsetbits_le32(&info->reg->flash_nf_access, GENMASK(31, 0),
+ NFLASH_REG_WIDTH_32);
+ if (is_writing)
+ clrsetbits_le32(&info->reg->flash_nf_data,
+ GENMASK(31, 0), pwrite[rw_index]);
+
+ clrsetbits_le32(&info->reg->flash_flash_access_start,
+ GENMASK(11, 10), reg_val);
+
+ if (!nand_waitfor_cmd_completion(info->reg, NFLASH_GO))
+ printf("%s: Command timeout\n", __func__);
+
+ if (!is_writing)
+ pread[rw_index] = readl(&info->reg->flash_nf_data);
+ }
+ return 0;
+}
+
+/**
+ * OOB data read function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param page page number to read
+ */
+static int nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ if (mtd->writesize <= (REG_DATA_COUNT_512_DATA >> 8))
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(7, 0),
+ NAND_CMD_READOOB);
+ ret = nand_rw_oob(mtd, chip, page, 0, 0);
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset,
+ GENMASK(31, 0), ECC_RESET_ALL);
+
+ return ret;
+}
+
+/**
+ * OOB data write function
+ *
+ * @param mtd mtd info structure
+ * @param chip nand chip info structure
+ * @param page page number to write
+ * @return 0 when successfully completed
+ * -ETIMEDOUT when command timeout
+ */
+static int nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(chip);
+ int ret;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ if (mtd->writesize <= (REG_DATA_COUNT_512_DATA >> 8)) {
+ clrsetbits_le32(&info->reg->flash_nf_command, GENMASK(31, 0),
+ NAND_CMD_READOOB | (NAND_CMD_SEQIN << 8) |
+ (NAND_CMD_PAGEPROG << 16));
+ clrsetbits_le32(&info->reg->flash_nf_count, GENMASK(1, 0),
+ REG_CMD_COUNT_3TOGO);
+ }
+ ret = nand_rw_oob(mtd, chip, page, 1, 1);
+
+ /* Reset FIFO */
+ clrsetbits_le32(&info->reg->flash_nf_ecc_reset,
+ GENMASK(31, 0), ECC_RESET_ALL);
+
+ return ret;
+}
+
+/**
+ * Decode NAND parameters from the device tree
+ *
+ * @param dev Driver model device
+ * @param config Device tree NAND configuration
+ */
+static int fdt_decode_nand(struct udevice *dev, struct nand_drv *info)
+{
+ int ecc_strength;
+
+ info->reg = (struct nand_ctlr *)dev_read_addr(dev);
+ info->dma_glb = (struct dma_global *)dev_read_addr_index(dev, 1);
+ info->dma_nand = (struct dma_ssp *)dev_read_addr_index(dev, 2);
+ info->config.enabled = dev_read_enabled(dev);
+ ecc_strength = dev_read_u32_default(dev, "nand-ecc-strength", 16);
+ info->flash_base =
+ dev_read_u32_default(dev, "nand_flash_base_addr", NAND_BASE_ADDR);
+
+ switch (ecc_strength) {
+ case ECC_STRENGTH_8:
+ info->config.nand_ecc_strength = ECC_STRENGTH_8;
+ break;
+ case ECC_STRENGTH_16:
+ info->config.nand_ecc_strength = ECC_STRENGTH_16;
+ break;
+ case ECC_STRENGTH_24:
+ info->config.nand_ecc_strength = ECC_STRENGTH_24;
+ break;
+ case ECC_STRENGTH_40:
+ info->config.nand_ecc_strength = ECC_STRENGTH_40;
+ break;
+ default:
+ info->config.nand_ecc_strength = ECC_STRENGTH_16;
+ }
+
+ return 0;
+}
+
+/**
+ * config flash type
+ *
+ * @param chip nand chip info structure
+ */
+static void nand_config_flash_type(struct nand_chip *nand)
+{
+ struct nand_drv *info =
+ (struct nand_drv *)nand_get_controller_data(nand);
+ struct mtd_info *mtd = nand_to_mtd(nand);
+
+ switch (mtd->writesize) {
+ case WRITE_SIZE_512:
+ clrsetbits_le32(&info->reg->flash_type, GENMASK(31, 0),
+ FLASH_PIN | FLASH_TYPE_512);
+ break;
+ case WRITE_SIZE_2048:
+ clrsetbits_le32(&info->reg->flash_type, GENMASK(31, 0),
+ FLASH_PIN | FLASH_TYPE_2K);
+ break;
+ case WRITE_SIZE_4096:
+ clrsetbits_le32(&info->reg->flash_type, GENMASK(31, 0),
+ FLASH_PIN | FLASH_TYPE_4K);
+ break;
+ case WRITE_SIZE_8192:
+ clrsetbits_le32(&info->reg->flash_type, GENMASK(31, 0),
+ FLASH_PIN | FLASH_TYPE_8K);
+ break;
+ default:
+ pr_err("Unsupported page size(0x%x)!", nand->ecc.size);
+ }
+}
+
+/**
+ * config oob layout
+ *
+ * @param chip nand chip info structure
+ * @return 0 when successfully completed
+ * -EINVAL when ECC bytes exceed OOB size
+ */
+static int nand_config_oob_layout(struct nand_chip *nand)
+{
+ int i, ecc_start_offset;
+ struct mtd_info *mtd = nand_to_mtd(nand);
+
+ /* Calculate byte count for ECC */
+ eccoob.eccbytes = mtd->writesize / nand->ecc.size * nand->ecc.bytes;
+
+ if (mtd->oobsize < eccoob.eccbytes) {
+ pr_err("Spare area(%d) too small for BCH%d\n", nand->ecc.bytes,
+ nand->ecc.strength / 8);
+ pr_err("page_sz: %d\n", nand->ecc.size);
+ pr_err("oob_sz: %d\n", nand->ecc.bytes);
+ return -EINVAL;
+ }
+
+ /* Update OOB layout */
+ ecc_start_offset = mtd->oobsize - eccoob.eccbytes;
+ memset(eccoob.eccpos, 0, sizeof(eccoob.eccpos));
+ for (i = 0; i < eccoob.eccbytes; ++i)
+ eccoob.eccpos[i] = i + ecc_start_offset;
+
+ /* Unused spare area
+ * OOB[0] is bad block marker.
+ * Extra two byte is reserved as
+ * erase marker just right before ECC code.
+ */
+ eccoob.oobavail = nand->ecc.bytes - eccoob.eccbytes - 2;
+ eccoob.oobfree[0].offset = 2;
+ eccoob.oobfree[0].length =
+ mtd->oobsize - eccoob.eccbytes - eccoob.oobfree[0].offset - 1;
+
+ return 0;
+}
+
+static int ca_nand_probe(struct udevice *dev)
+{
+ struct ca_nand_info *ca_nand = dev_get_priv(dev);
+ struct nand_chip *nand = &ca_nand->nand_chip;
+ struct nand_drv *info = &ca_nand->nand_ctrl;
+ struct fdt_nand *config = &info->config;
+ struct mtd_info *our_mtd;
+ int ret;
+
+ if (fdt_decode_nand(dev, info)) {
+ printf("Could not decode nand-flash in device tree\n");
+ return -1;
+ }
+ if (!config->enabled)
+ return -1;
+
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.layout = &eccoob;
+
+ nand->cmdfunc = ca_nand_command;
+ nand->read_byte = read_byte;
+ nand->read_buf = read_buf;
+ nand->ecc.read_page = nand_read_page_hwecc;
+ nand->ecc.write_page = nand_write_page_hwecc;
+ nand->ecc.read_page_raw = nand_read_page_raw;
+ nand->ecc.write_page_raw = nand_write_page_raw;
+ nand->ecc.read_oob = nand_read_oob;
+ nand->ecc.write_oob = nand_write_oob;
+ nand->ecc.strength = config->nand_ecc_strength;
+ nand->select_chip = nand_select_chip;
+ nand->dev_ready = nand_dev_ready;
+ nand_set_controller_data(nand, &ca_nand->nand_ctrl);
+
+ /* Disable subpage writes as we do not provide ecc->hwctl */
+ nand->options |= NAND_NO_SUBPAGE_WRITE | NAND_SKIP_BBTSCAN;
+
+ /* Configure flash type as P-NAND */
+ clrsetbits_le32(&info->reg->flash_type, FLASH_PIN,
+ FLASH_TYPE_4K | FLASH_SIZE_436OOB);
+ config->width = FLASH_WIDTH;
+
+ our_mtd = nand_to_mtd(nand);
+ ret = nand_scan_ident(our_mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
+ if (ret)
+ return ret;
+
+ nand->ecc.size = BCH_DATA_UNIT;
+ nand->ecc.bytes = BCH_GF_PARAM_M * (nand->ecc.strength / 8);
+
+ /* Reconfig flash type according to ONFI */
+ nand_config_flash_type(nand);
+
+ ret = set_bus_width_page_size(our_mtd);
+ if (ret)
+ return ret;
+
+ /* Set the bad block position */
+ nand->badblockpos =
+ our_mtd->writesize >
+ 512 ? NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+
+ /* Arrange OOB layout */
+ ret = nand_config_oob_layout(nand);
+ if (ret)
+ return ret;
+
+ /* Init DMA descriptor ring */
+ ret = init_nand_dma(nand);
+ if (ret)
+ return ret;
+
+ ret = nand_scan_tail(our_mtd);
+ if (ret)
+ return ret;
+
+ ret = nand_register(0, our_mtd);
+ if (ret) {
+ dev_err(dev, "Failed to register MTD: %d\n", ret);
+ return ret;
+ }
+
+ ret = set_bus_width_page_size(our_mtd);
+ if (ret)
+ return ret;
+
+ printf("P-NAND : %s\n", our_mtd->name);
+ printf("Chip Size: %lldMB\n", nand->chipsize / (1024 * 1024));
+ printf("Block Size: %dKB\n", our_mtd->erasesize / 1024);
+ printf("Page Size: %dB\n", our_mtd->writesize);
+ printf("OOB Size: %dB\n", our_mtd->oobsize);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(cortina_nand) = {
+ .name = "CA-PNAND",
+ .id = UCLASS_MTD,
+ .of_match = cortina_nand_dt_ids,
+ .probe = ca_nand_probe,
+ .priv_auto = sizeof(struct ca_nand_info),
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_DRIVER_GET(cortina_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize %s. (error %d)\n", dev->name, ret);
+}
diff --git a/drivers/mtd/nand/raw/cortina_nand.h b/drivers/mtd/nand/raw/cortina_nand.h
new file mode 100644
index 0000000..1e3e3bf
--- /dev/null
+++ b/drivers/mtd/nand/raw/cortina_nand.h
@@ -0,0 +1,293 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2020 Cortina Access Inc..
+ */
+
+/* Cortina NAND definition */
+#define NAND_BASE_ADDR 0xE0000000
+#define BCH_GF_PARAM_M 14
+#define BCH_DATA_UNIT 1024
+#define FLASH_SHORT_DELAY 100
+#define FLASH_LONG_DELAY 1000
+#define FLASH_WIDTH 16
+#define BBT_PAGE_MASK 0xffffff3f
+#define WRITE_SIZE_512 512
+#define WRITE_SIZE_2048 2048
+#define WRITE_SIZE_4096 4096
+#define WRITE_SIZE_8192 8192
+#define ECC_STRENGTH_8 8
+#define ECC_STRENGTH_16 16
+#define ECC_STRENGTH_24 24
+#define ECC_STRENGTH_40 40
+#define EMPTY_PAGE 0xff
+#define ADDR1_MASK0 0x00ffffff
+#define ADDR2_MASK0 0xff000000
+#define ADDR1_MASK1 0xffff
+#define ADDR1_MASK2 0xff
+#define OOB_MASK 0xff
+#define EXT_ADDR_MASK 0x8000000
+
+/* Status bits */
+#define NAND_STATUS_FAIL 0x01
+#define NAND_STATUS_FAIL_N1 0x02
+#define NAND_STATUS_TRUE_READY 0x20
+#define NAND_STATUS_READY 0x40
+#define NAND_STATUS_WP 0x80
+
+/* Bit field in FLAS_TYPE */
+#define FLASH_PIN BIT(15)
+#define FLASH_TYPE_512 0x4000
+#define FLASH_TYPE_2K 0x5000
+#define FLASH_TYPE_4K 0x6000
+#define FLASH_TYPE_8K 0x7000
+#define FLASH_SIZE_CONFIGURABLEOOB (0x0 << 9)
+#define FLASH_SIZE_400OOB (0x1 << 9)
+#define FLASH_SIZE_436OOB (0x2 << 9)
+#define FLASH_SIZE_640OOB (0x3 << 9)
+
+/* Bit field in FLASH_STATUS */
+#define NFLASH_READY BIT(26)
+
+/* Bit field in FLASH_NF_ACCESS */
+#define NFLASH_ENABLE_ALTERNATIVE (0x0 << 15)
+#define AUTO_RESET BIT(16)
+#define DISABLE_AUTO_RESET (0x0 << 16)
+#define NFLASH_REG_WIDTH_RESERVED (0x3 << 10)
+#define NFLASH_REG_WIDTH_32 (0x2 << 10)
+#define NFLASH_REG_WIDTH_16 (0x1 << 10)
+#define NFLASH_REG_WIDTH_8 (0x0 << 10)
+
+/* Bit field in FLASH_NF_COUNT */
+#define REG_CMD_COUNT_EMPTY 0x3
+#define REG_CMD_COUNT_3TOGO 0x2
+#define REG_CMD_COUNT_2TOGO 0x1
+#define REG_CMD_COUNT_1TOGO 0x0
+#define REG_ADDR_COUNT_EMPTY (0x7 << 4)
+#define REG_ADDR_COUNT_5 (0x4 << 4)
+#define REG_ADDR_COUNT_4 (0x3 << 4)
+#define REG_ADDR_COUNT_3 (0x2 << 4)
+#define REG_ADDR_COUNT_2 (0x1 << 4)
+#define REG_ADDR_COUNT_1 (0x0 << 4)
+#define REG_DATA_COUNT_EMPTY (0x3fff << 8)
+#define REG_DATA_COUNT_512_DATA (0x1FF << 8)
+#define REG_DATA_COUNT_2k_DATA (0x7FF << 8)
+#define REG_DATA_COUNT_4k_DATA (0xFFF << 8)
+#define REG_DATA_COUNT_DATA_1 (0x0 << 8)
+#define REG_DATA_COUNT_DATA_2 (0x1 << 8)
+#define REG_DATA_COUNT_DATA_3 (0x2 << 8)
+#define REG_DATA_COUNT_DATA_4 (0x3 << 8)
+#define REG_DATA_COUNT_DATA_5 (0x4 << 8)
+#define REG_DATA_COUNT_DATA_6 (0x5 << 8)
+#define REG_DATA_COUNT_DATA_7 (0x6 << 8)
+#define REG_DATA_COUNT_DATA_8 (0x7 << 8)
+#define REG_OOB_COUNT_EMPTY (0x3ff << 22)
+
+/* Bit field in FLASH_FLASH_ACCESS_START */
+#define NFLASH_GO BIT(0)
+#define NFLASH_FIFO_REQ BIT(2)
+#define NFLASH_RD BIT(13)
+#define NFLASH_WT (BIT(12) | BIT(13))
+
+/* Bit field in FLASH_NF_ECC_RESET */
+#define RESET_NFLASH_RESET BIT(2)
+#define RESET_NFLASH_FIFO BIT(1)
+#define RESET_NFLASH_ECC BIT(0)
+#define ECC_RESET_ALL \
+ RESET_NFLASH_RESET | RESET_NFLASH_FIFO | RESET_NFLASH_ECC
+
+/* Bit field in FLASH_NF_ECC_CONTROL */
+#define ENABLE_ECC_GENERATION BIT(8)
+#define DISABLE_ECC_GENERATION (0 << 8)
+
+/* Flash FIFO control */
+#define FIFO_READ 2
+#define FIFO_WRITE 3
+
+/* NFLASH INTERRUPT */
+#define REGIRQ_CLEAR BIT(0)
+#define F_ADDR_ERR 2
+
+/* BCH ECC field definition */
+#define BCH_COMPARE BIT(0)
+#define BCH_ENABLE BIT(8)
+#define BCH_DISABLE (0 << 8)
+#define BCH_DECODE BIT(1)
+#define BCH_ENCODE (0 << 1)
+#define BCH_DECO_DONE BIT(30)
+#define BCH_GEN_DONE BIT(31)
+#define BCH_UNCORRECTABLE 0x3
+#define BCH_CORRECTABLE_ERR 0x2
+#define BCH_NO_ERR 0x1
+#define BCH_BUSY 0x0
+#define BCH_ERR_MASK 0x3
+#define BCH_ERR_NUM_MASK 0x3F
+#define BCH_ERR_LOC_MASK 0x3FFF
+#define BCH_CORRECT_LOC_MASK 0x7
+#define BCH_ERR_CAP_8 (0x0 << 9)
+#define BCH_ERR_CAP_16 (0x1 << 9)
+#define BCH_ERR_CAP_24 (0x2 << 9)
+#define BCH_ERR_CAP_40 (0x3 << 9)
+
+#define BCH_GF_PARAM_M 14
+
+struct nand_ctlr {
+ /* Cortina NAND controller register */
+ u32 flash_id;
+ u32 flash_timeout;
+ u32 flash_status;
+ u32 flash_type;
+ u32 flash_flash_access_start;
+ u32 flash_flash_interrupt;
+ u32 flash_flash_mask;
+ u32 flash_fifo_control;
+ u32 flash_fifo_status;
+ u32 flash_fifo_address;
+ u32 flash_fifo_match_address;
+ u32 flash_fifo_data;
+ u32 flash_sf_access;
+ u32 flash_sf_ext_access;
+ u32 flash_sf_address;
+ u32 flash_sf_data;
+ u32 flash_sf_timing;
+ u32 resv[3];
+ u32 flash_pf_access; // offset 0x050
+ u32 flash_pf_timing;
+ u32 resv1[2];
+ u32 flash_nf_access; // offset 0x060
+ u32 flash_nf_count;
+ u32 flash_nf_command;
+ u32 flash_nf_address_1;
+ u32 flash_nf_address_2;
+ u32 flash_nf_data;
+ u32 flash_nf_timing;
+ u32 flash_nf_ecc_status;
+ u32 flash_nf_ecc_control;
+ u32 flash_nf_ecc_oob;
+ u32 flash_nf_ecc_gen0;
+ u32 resv3[15];
+ u32 flash_nf_ecc_reset; // offset 0x0c8
+ u32 flash_nf_bch_control;
+ u32 flash_nf_bch_status;
+ u32 flash_nf_bch_error_loc01;
+ u32 resv4[19];
+ u32 flash_nf_bch_oob0; // offset 0x124
+ u32 resv5[17];
+ u32 flash_nf_bch_gen0_0; // offset 0x16c
+};
+
+/* Definition for DMA bitfield */
+#define TX_DMA_ENABLE BIT(0)
+#define RX_DMA_ENABLE BIT(0)
+#define DMA_CHECK_OWNER BIT(1)
+#define OWN_DMA 0
+#define OWN_CPU 1
+
+#define CA_DMA_DEPTH 3
+#define CA_DMA_DESC_NUM (BIT(0) << CA_DMA_DEPTH)
+#define CA_DMA_Q_PTR_MASK 0x1fff
+
+struct dma_q_base_depth_t {
+ u32 depth : 4 ; /* bits 3:0 */
+ u32 base : 28 ; /* bits 31:4 */
+};
+
+struct tx_descriptor_t {
+ unsigned int buf_adr; /* Buff addr */
+ unsigned int buf_adr_hi : 8 ; /* bits 7:0 */
+ unsigned int buf_len : 16 ; /* bits 23:8 */
+ unsigned int sgm : 1 ; /* bits 24 */
+ unsigned int rsrvd : 6 ; /* bits 30:25 */
+ unsigned int own : 1 ; /* bits 31:31 */
+};
+
+struct rx_descriptor_t {
+ unsigned int buf_adr; /* Buff addr */
+ unsigned int buf_adr_hi : 8 ; /* bits 7:0 */
+ unsigned int buf_len : 16 ; /* bits 23:8 */
+ unsigned int rsrvd : 7 ; /* bits 30:24 */
+ unsigned int own : 1 ; /* bits 31:31 */
+};
+
+struct dma_global {
+ u32 dma_glb_dma_lso_ctrl;
+ u32 dma_glb_lso_interrupt;
+ u32 dma_glb_lso_intenable;
+ u32 dma_glb_dma_lso_vlan_tag_type0;
+ u32 dma_glb_dma_lso_vlan_tag_type1;
+ u32 dma_glb_dma_lso_axi_user_sel0;
+ u32 dma_glb_axi_user_pat0;
+ u32 dma_glb_axi_user_pat1;
+ u32 dma_glb_axi_user_pat2;
+ u32 dma_glb_axi_user_pat3;
+ u32 dma_glb_fast_reg_pe0;
+ u32 dma_glb_fast_reg_pe1;
+ u32 dma_glb_dma_lso_tx_fdes_addr0;
+ u32 dma_glb_dma_lso_tx_fdes_addr1;
+ u32 dma_glb_dma_lso_tx_cdes_addr0;
+ u32 dma_glb_dma_lso_tx_cdes_addr1;
+ u32 dma_glb_dma_lso_tx_des_word0;
+ u32 dma_glb_dma_lso_tx_des_word1;
+ u32 dma_glb_dma_lso_lso_para_word0;
+ u32 dma_glb_dma_lso_lso_para_word1;
+ u32 dma_glb_dma_lso_debug0;
+ u32 dma_glb_dma_lso_debug1;
+ u32 dma_glb_dma_lso_debug2;
+ u32 dma_glb_dma_lso_spare0;
+ u32 dma_glb_dma_lso_spare1;
+ u32 dma_glb_dma_ssp_rx_ctrl;
+ u32 dma_glb_dma_ssp_tx_ctrl;
+ u32 dma_glb_dma_ssp_axi_user_sel0;
+ u32 dma_glb_dma_ssp_axi_user_sel1;
+ u32 dma_glb_dma_ssp_rx_fdes_addr0;
+ u32 dma_glb_dma_ssp_rx_fdes_addr1;
+ u32 dma_glb_dma_ssp_rx_cdes_addr0;
+ u32 dma_glb_dma_ssp_rx_cdes_addr1;
+ u32 dma_glb_dma_ssp_rx_des_word0;
+ u32 dma_glb_dma_ssp_rx_des_word1;
+ u32 dma_glb_dma_ssp_tx_fdes_addr0;
+ u32 dma_glb_dma_ssp_tx_fdes_addr1;
+ u32 dma_glb_dma_ssp_tx_cdes_addr0;
+ u32 dma_glb_dma_ssp_tx_cdes_addr1;
+ u32 dma_glb_dma_ssp_tx_des_word0;
+ u32 dma_glb_dma_ssp_tx_des_word1;
+ u32 dma_glb_dma_ssp_debug0;
+ u32 dma_glb_dma_ssp_debug1;
+ u32 dma_glb_dma_ssp_debug2;
+ u32 dma_glb_dma_ssp_spare0;
+ u32 dma_glb_dma_ssp_spare1;
+};
+
+struct dma_ssp {
+ u32 dma_q_rxq_control;
+ u32 dma_q_rxq_base_depth;
+ u32 dma_q_rxq_base;
+ u32 dma_q_rxq_wptr;
+ u32 dma_q_rxq_rptr;
+ u32 dma_q_rxq_pktcnt;
+ u32 dma_q_txq_control;
+ u32 dma_q_txq_base_depth;
+ u32 dma_q_txq_base;
+ u32 dma_q_txq_wptr;
+ u32 dma_q_txq_rptr;
+ u32 dma_q_txq_pktcnt;
+ u32 dma_q_rxq_interrupt;
+ u32 dma_q_rxq_intenable;
+ u32 dma_q_txq_interrupt;
+ u32 dma_q_txq_intenable;
+ u32 dma_q_rxq_misc_interrupt;
+ u32 dma_q_rxq_misc_intenable;
+ u32 dma_q_txq_misc_interrupt;
+ u32 dma_q_txq_misc_intenable;
+ u32 dma_q_rxq_coal_interrupt;
+ u32 dma_q_rxq_coal_intenable;
+ u32 dma_q_txq_coal_interrupt;
+ u32 dma_q_txq_coal_intenable;
+ u32 dma_q_rxq_frag_buff_addr0;
+ u32 dma_q_rxq_frag_buff_addr1;
+ u32 dma_q_rxq_frag_buff_size;
+ u32 dma_q_txq_frag_buff_addr0;
+ u32 dma_q_txq_frag_buff_addr1;
+ u32 dma_q_txq_frag_buff_size;
+ u32 dma_q_dma_spare_0;
+ u32 dma_q_dma_spare_1;
+};
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 6553dde..4dd3f73 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -615,6 +615,7 @@
if (!drv)
return -ENOENT;
+ ret = -ENOENT;
dev_for_each_subnode(node, parent)
if (ofnode_read_bool(node, "gpio-controller")) {
ret = 0;
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 7d51510..583fd3d 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -91,6 +91,21 @@
The driver implements read/write operations for use with the FAN53555
regulator driver and binds the regulator driver to its node.
+config DM_PMIC_MP5416
+ bool "Enable Driver Model for PMIC MP5416"
+ depends on DM_PMIC
+ help
+ This config enables implementation of driver-model pmic uclass features
+ for PMIC MP5416. The driver implements read/write operations.
+
+config SPL_DM_PMIC_MP5416
+ bool "Enable Driver Model for PMIC MP5416 in SPL stage"
+ depends on DM_PMIC
+ help
+ This config enables implementation of driver-model pmic uclass
+ features for PMIC MP5416. The driver implements read/write
+ operations.
+
config DM_PMIC_PCA9450
bool "Enable Driver Model for PMIC PCA9450"
depends on DM_PMIC
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 9cd6c37..2b2a6dd 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
obj-$(CONFIG_$(SPL_)DM_PMIC_BD71837) += bd71837.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_MP5416) += mp5416.o
obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(SPL_)DM_PMIC_PCA9450) += pca9450.o
obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
diff --git a/drivers/power/pmic/mp5416.c b/drivers/power/pmic/mp5416.c
new file mode 100644
index 0000000..458c4df
--- /dev/null
+++ b/drivers/power/pmic/mp5416.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+#include <common.h>
+#include <errno.h>
+#include <dm.h>
+#include <i2c.h>
+#include <log.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/mp5416.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct pmic_child_info pmic_children_info[] = {
+ /* buck */
+ { .prefix = "b", .driver = MP6416_REGULATOR_DRIVER },
+ /* ldo */
+ { .prefix = "l", .driver = MP6416_REGULATOR_DRIVER },
+ { },
+};
+
+static int mp5416_reg_count(struct udevice *dev)
+{
+ return MP5416_NUM_OF_REGS - 1;
+}
+
+static int mp5416_write(struct udevice *dev, uint reg, const uint8_t *buff,
+ int len)
+{
+ if (dm_i2c_write(dev, reg, buff, len)) {
+ pr_err("write error to device: %p register: %#x!", dev, reg);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int mp5416_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+{
+ if (dm_i2c_read(dev, reg, buff, len)) {
+ pr_err("read error from device: %p register: %#x!", dev, reg);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int mp5416_bind(struct udevice *dev)
+{
+ int children;
+ ofnode regulators_node;
+
+ debug("%s %s\n", __func__, dev->name);
+ regulators_node = dev_read_subnode(dev, "regulators");
+ if (!ofnode_valid(regulators_node)) {
+ debug("%s: %s regulators subnode not found!\n", __func__,
+ dev->name);
+ return -ENXIO;
+ }
+
+ debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
+
+ children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+ if (!children)
+ debug("%s: %s - no child found\n", __func__, dev->name);
+
+ /* Always return success for this device */
+ return 0;
+}
+
+static int mp5416_probe(struct udevice *dev)
+{
+ debug("%s %s\n", __func__, dev->name);
+
+ return 0;
+}
+
+static struct dm_pmic_ops mp5416_ops = {
+ .reg_count = mp5416_reg_count,
+ .read = mp5416_read,
+ .write = mp5416_write,
+};
+
+static const struct udevice_id mp5416_ids[] = {
+ { .compatible = "mps,mp5416", },
+ { }
+};
+
+U_BOOT_DRIVER(pmic_mp5416) = {
+ .name = "mp5416 pmic",
+ .id = UCLASS_PMIC,
+ .of_match = mp5416_ids,
+ .bind = mp5416_bind,
+ .probe = mp5416_probe,
+ .ops = &mp5416_ops,
+};
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 1a829b5..259e4e3 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -288,7 +288,6 @@
struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
if (!mmc) {
- free(addr);
printf("\nMMC cannot find device for ucode\n");
} else {
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig
index 020c913..049b9dc 100644
--- a/drivers/ram/aspeed/Kconfig
+++ b/drivers/ram/aspeed/Kconfig
@@ -1,4 +1,5 @@
if RAM || SPL_RAM
+
config ASPEED_DDR4_DUALX8
bool "Enable Dual X8 DDR4 die"
depends on DM && OF_CONTROL && ARCH_ASPEED
@@ -7,4 +8,62 @@
Say Y if dual X8 DDR4 die is used on the board. The aspeed ddr sdram
controller needs to know if the memory chip mounted on the board is dual
x8 die or not. Or it may get the wrong size of the memory space.
-endif
+
+if ASPEED_AST2600
+
+choice
+ prompt "DDR4 target date rate"
+ default ASPEED_DDR4_1600
+
+config ASPEED_DDR4_400
+ bool "DDR4 targets at 400Mbps"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ help
+ select DDR4 target data rate at 400M
+
+config ASPEED_DDR4_800
+ bool "DDR4 targets at 800Mbps"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ help
+ select DDR4 target data rate at 800M
+
+config ASPEED_DDR4_1333
+ bool "DDR4 targets at 1333Mbps"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ help
+ select DDR4 target data rate at 1333M
+
+config ASPEED_DDR4_1600
+ bool "DDR4 targets at 1600Mbps"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ help
+ select DDR4 target data rate at 1600M
+endchoice
+
+config ASPEED_BYPASS_SELFTEST
+ bool "bypass self test during DRAM initialization"
+ default n
+ help
+ Say Y here to bypass DRAM self test to speed up the boot time
+
+config ASPEED_ECC
+ bool "aspeed SDRAM error correcting code"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ default n
+ help
+ enable SDRAM ECC function
+
+if ASPEED_ECC
+config ASPEED_ECC_SIZE
+ int "ECC size: 0=driver auto-caluated"
+ depends on ASPEED_ECC
+ default 0
+ help
+ SDRAM size with the error correcting code enabled. The unit is
+ in Megabytes. Noted that only the 8/9 of the configured size
+ can be used by the system. The remaining 1/9 will be used by
+ the ECC engine. If the size is set to 0, the sdram driver will
+ calculate the SDRAM size and set the whole range be ECC enabled.
+endif # end of ASPEED_ECC
+endif # end of ASPEED_AST2600
+endif # end of RAM || SPL_RAM
diff --git a/drivers/ram/aspeed/Makefile b/drivers/ram/aspeed/Makefile
index af604f8..7ac10af 100644
--- a/drivers/ram/aspeed/Makefile
+++ b/drivers/ram/aspeed/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ASPEED_AST2500) += sdram_ast2500.o
\ No newline at end of file
+obj-$(CONFIG_ASPEED_AST2500) += sdram_ast2500.o
+obj-$(CONFIG_ASPEED_AST2600) += sdram_ast2600.o
diff --git a/drivers/ram/aspeed/sdram_ast2600.c b/drivers/ram/aspeed/sdram_ast2600.c
new file mode 100644
index 0000000..fd42352
--- /dev/null
+++ b/drivers/ram/aspeed/sdram_ast2600.c
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <ram.h>
+#include <regmap.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2600.h>
+#include <asm/arch/sdram_ast2600.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+#define DDR_PHY_TBL_CHG_ADDR 0xaeeddeea
+#define DDR_PHY_TBL_END 0xaeededed
+
+#if defined(CONFIG_ASPEED_DDR4_800)
+u32 ast2600_sdramphy_config[165] = {
+ 0x1e6e0100, // start address
+ 0x00000000, // phyr000
+ 0x0c002062, // phyr004
+ 0x1a7a0063, // phyr008
+ 0x5a7a0063, // phyr00c
+ 0x1a7a0063, // phyr010
+ 0x1a7a0063, // phyr014
+ 0x20000000, // phyr018
+ 0x20000000, // phyr01c
+ 0x20000000, // phyr020
+ 0x20000000, // phyr024
+ 0x00000008, // phyr028
+ 0x00000000, // phyr02c
+ 0x00077600, // phyr030
+ 0x00000000, // phyr034
+ 0x00000000, // phyr038
+ 0x20000000, // phyr03c
+ 0x50506000, // phyr040
+ 0x50505050, // phyr044
+ 0x00002f07, // phyr048
+ 0x00003080, // phyr04c
+ 0x04000000, // phyr050
+ 0x00000200, // phyr054
+ 0x03140201, // phyr058
+ 0x04800000, // phyr05c
+ 0x0800044e, // phyr060
+ 0x00000000, // phyr064
+ 0x00180008, // phyr068
+ 0x00e00400, // phyr06c
+ 0x00140206, // phyr070
+ 0x1d4c0000, // phyr074
+ 0x493e0107, // phyr078
+ 0x08060404, // phyr07c
+ 0x90000a00, // phyr080
+ 0x06420618, // phyr084
+ 0x00001002, // phyr088
+ 0x05701016, // phyr08c
+ 0x10000000, // phyr090
+ 0xaeeddeea, // change address
+ 0x1e6e019c, // new address
+ 0x20202020, // phyr09c
+ 0x20202020, // phyr0a0
+ 0x00002020, // phyr0a4
+ 0x00002020, // phyr0a8
+ 0x00000001, // phyr0ac
+ 0xaeeddeea, // change address
+ 0x1e6e01cc, // new address
+ 0x01010101, // phyr0cc
+ 0x01010101, // phyr0d0
+ 0x80808080, // phyr0d4
+ 0x80808080, // phyr0d8
+ 0xaeeddeea, // change address
+ 0x1e6e0288, // new address
+ 0x80808080, // phyr188
+ 0x80808080, // phyr18c
+ 0x80808080, // phyr190
+ 0x80808080, // phyr194
+ 0xaeeddeea, // change address
+ 0x1e6e02f8, // new address
+ 0x90909090, // phyr1f8
+ 0x88888888, // phyr1fc
+ 0xaeeddeea, // change address
+ 0x1e6e0300, // new address
+ 0x00000000, // phyr200
+ 0xaeeddeea, // change address
+ 0x1e6e0194, // new address
+ 0x80118260, // phyr094
+ 0xaeeddeea, // change address
+ 0x1e6e019c, // new address
+ 0x20202020, // phyr09c
+ 0x20202020, // phyr0a0
+ 0x00002020, // phyr0a4
+ 0x80000000, // phyr0a8
+ 0x00000001, // phyr0ac
+ 0xaeeddeea, // change address
+ 0x1e6e0318, // new address
+ 0x09222719, // phyr218
+ 0x00aa4403, // phyr21c
+ 0xaeeddeea, // change address
+ 0x1e6e0198, // new address
+ 0x08060000, // phyr098
+ 0xaeeddeea, // change address
+ 0x1e6e01b0, // new address
+ 0x00000000, // phyr0b0
+ 0x00000000, // phyr0b4
+ 0x00000000, // phyr0b8
+ 0x00000000, // phyr0bc
+ 0x00000000, // phyr0c0
+ 0x00000000, // phyr0c4
+ 0x000aff2c, // phyr0c8
+ 0xaeeddeea, // change address
+ 0x1e6e01dc, // new address
+ 0x00080000, // phyr0dc
+ 0x00000000, // phyr0e0
+ 0xaa55aa55, // phyr0e4
+ 0x55aa55aa, // phyr0e8
+ 0xaaaa5555, // phyr0ec
+ 0x5555aaaa, // phyr0f0
+ 0xaa55aa55, // phyr0f4
+ 0x55aa55aa, // phyr0f8
+ 0xaaaa5555, // phyr0fc
+ 0x5555aaaa, // phyr100
+ 0xaa55aa55, // phyr104
+ 0x55aa55aa, // phyr108
+ 0xaaaa5555, // phyr10c
+ 0x5555aaaa, // phyr110
+ 0xaa55aa55, // phyr114
+ 0x55aa55aa, // phyr118
+ 0xaaaa5555, // phyr11c
+ 0x5555aaaa, // phyr120
+ 0x20202020, // phyr124
+ 0x20202020, // phyr128
+ 0x20202020, // phyr12c
+ 0x20202020, // phyr130
+ 0x20202020, // phyr134
+ 0x20202020, // phyr138
+ 0x20202020, // phyr13c
+ 0x20202020, // phyr140
+ 0x20202020, // phyr144
+ 0x20202020, // phyr148
+ 0x20202020, // phyr14c
+ 0x20202020, // phyr150
+ 0x20202020, // phyr154
+ 0x20202020, // phyr158
+ 0x20202020, // phyr15c
+ 0x20202020, // phyr160
+ 0x20202020, // phyr164
+ 0x20202020, // phyr168
+ 0x20202020, // phyr16c
+ 0x20202020, // phyr170
+ 0xaeeddeea, // change address
+ 0x1e6e0298, // new address
+ 0x20200800, // phyr198
+ 0x20202020, // phyr19c
+ 0x20202020, // phyr1a0
+ 0x20202020, // phyr1a4
+ 0x20202020, // phyr1a8
+ 0x20202020, // phyr1ac
+ 0x20202020, // phyr1b0
+ 0x20202020, // phyr1b4
+ 0x20202020, // phyr1b8
+ 0x20202020, // phyr1bc
+ 0x20202020, // phyr1c0
+ 0x20202020, // phyr1c4
+ 0x20202020, // phyr1c8
+ 0x20202020, // phyr1cc
+ 0x20202020, // phyr1d0
+ 0x20202020, // phyr1d4
+ 0x20202020, // phyr1d8
+ 0x20202020, // phyr1dc
+ 0x20202020, // phyr1e0
+ 0x20202020, // phyr1e4
+ 0x00002020, // phyr1e8
+ 0xaeeddeea, // change address
+ 0x1e6e0304, // new address
+ 0x00000800, // phyr204
+ 0xaeeddeea, // change address
+ 0x1e6e027c, // new address
+ 0x4e400000, // phyr17c
+ 0x59595959, // phyr180
+ 0x40404040, // phyr184
+ 0xaeeddeea, // change address
+ 0x1e6e02f4, // new address
+ 0x00000059, // phyr1f4
+ 0xaeededed, // end
+};
+#else
+u32 ast2600_sdramphy_config[165] = {
+ 0x1e6e0100, // start address
+ 0x00000000, // phyr000
+ 0x0c002062, // phyr004
+ 0x1a7a0063, // phyr008
+ 0x5a7a0063, // phyr00c
+ 0x1a7a0063, // phyr010
+ 0x1a7a0063, // phyr014
+ 0x20000000, // phyr018
+ 0x20000000, // phyr01c
+ 0x20000000, // phyr020
+ 0x20000000, // phyr024
+ 0x00000008, // phyr028
+ 0x00000000, // phyr02c
+ 0x00077600, // phyr030
+ 0x00000000, // phyr034
+ 0x00000000, // phyr038
+ 0x20000000, // phyr03c
+ 0x50506000, // phyr040
+ 0x50505050, // phyr044
+ 0x00002f07, // phyr048
+ 0x00003080, // phyr04c
+ 0x04000000, // phyr050
+ 0x00000200, // phyr054
+ 0x03140501, // phyr058-rtt:40
+ 0x04800000, // phyr05c
+ 0x0800044e, // phyr060
+ 0x00000000, // phyr064
+ 0x00180008, // phyr068
+ 0x00e00400, // phyr06c
+ 0x00140206, // phyr070
+ 0x1d4c0000, // phyr074
+ 0x493e0107, // phyr078
+ 0x08060404, // phyr07c
+ 0x90000a00, // phyr080
+ 0x06420c30, // phyr084
+ 0x00001002, // phyr088
+ 0x05701016, // phyr08c
+ 0x10000000, // phyr090
+ 0xaeeddeea, // change address
+ 0x1e6e019c, // new address
+ 0x20202020, // phyr09c
+ 0x20202020, // phyr0a0
+ 0x00002020, // phyr0a4
+ 0x00002020, // phyr0a8
+ 0x00000001, // phyr0ac
+ 0xaeeddeea, // change address
+ 0x1e6e01cc, // new address
+ 0x01010101, // phyr0cc
+ 0x01010101, // phyr0d0
+ 0x80808080, // phyr0d4
+ 0x80808080, // phyr0d8
+ 0xaeeddeea, // change address
+ 0x1e6e0288, // new address
+ 0x80808080, // phyr188
+ 0x80808080, // phyr18c
+ 0x80808080, // phyr190
+ 0x80808080, // phyr194
+ 0xaeeddeea, // change address
+ 0x1e6e02f8, // new address
+ 0x90909090, // phyr1f8
+ 0x88888888, // phyr1fc
+ 0xaeeddeea, // change address
+ 0x1e6e0300, // new address
+ 0x00000000, // phyr200
+ 0xaeeddeea, // change address
+ 0x1e6e0194, // new address
+ 0x801112e0, // phyr094 - bit12=1,15=0,- write window is ok
+ 0xaeeddeea, // change address
+ 0x1e6e019c, // new address
+ 0x20202020, // phyr09c
+ 0x20202020, // phyr0a0
+ 0x00002020, // phyr0a4
+ 0x80000000, // phyr0a8
+ 0x00000001, // phyr0ac
+ 0xaeeddeea, // change address
+ 0x1e6e0318, // new address
+ 0x09222719, // phyr218
+ 0x00aa4403, // phyr21c
+ 0xaeeddeea, // change address
+ 0x1e6e0198, // new address
+ 0x08060000, // phyr098
+ 0xaeeddeea, // change address
+ 0x1e6e01b0, // new address
+ 0x00000000, // phyr0b0
+ 0x00000000, // phyr0b4
+ 0x00000000, // phyr0b8
+ 0x00000000, // phyr0bc
+ 0x00000000, // phyr0c0 - ori
+ 0x00000000, // phyr0c4
+ 0x000aff2c, // phyr0c8
+ 0xaeeddeea, // change address
+ 0x1e6e01dc, // new address
+ 0x00080000, // phyr0dc
+ 0x00000000, // phyr0e0
+ 0xaa55aa55, // phyr0e4
+ 0x55aa55aa, // phyr0e8
+ 0xaaaa5555, // phyr0ec
+ 0x5555aaaa, // phyr0f0
+ 0xaa55aa55, // phyr0f4
+ 0x55aa55aa, // phyr0f8
+ 0xaaaa5555, // phyr0fc
+ 0x5555aaaa, // phyr100
+ 0xaa55aa55, // phyr104
+ 0x55aa55aa, // phyr108
+ 0xaaaa5555, // phyr10c
+ 0x5555aaaa, // phyr110
+ 0xaa55aa55, // phyr114
+ 0x55aa55aa, // phyr118
+ 0xaaaa5555, // phyr11c
+ 0x5555aaaa, // phyr120
+ 0x20202020, // phyr124
+ 0x20202020, // phyr128
+ 0x20202020, // phyr12c
+ 0x20202020, // phyr130
+ 0x20202020, // phyr134
+ 0x20202020, // phyr138
+ 0x20202020, // phyr13c
+ 0x20202020, // phyr140
+ 0x20202020, // phyr144
+ 0x20202020, // phyr148
+ 0x20202020, // phyr14c
+ 0x20202020, // phyr150
+ 0x20202020, // phyr154
+ 0x20202020, // phyr158
+ 0x20202020, // phyr15c
+ 0x20202020, // phyr160
+ 0x20202020, // phyr164
+ 0x20202020, // phyr168
+ 0x20202020, // phyr16c
+ 0x20202020, // phyr170
+ 0xaeeddeea, // change address
+ 0x1e6e0298, // new address
+ 0x20200800, // phyr198
+ 0x20202020, // phyr19c
+ 0x20202020, // phyr1a0
+ 0x20202020, // phyr1a4
+ 0x20202020, // phyr1a8
+ 0x20202020, // phyr1ac
+ 0x20202020, // phyr1b0
+ 0x20202020, // phyr1b4
+ 0x20202020, // phyr1b8
+ 0x20202020, // phyr1bc
+ 0x20202020, // phyr1c0
+ 0x20202020, // phyr1c4
+ 0x20202020, // phyr1c8
+ 0x20202020, // phyr1cc
+ 0x20202020, // phyr1d0
+ 0x20202020, // phyr1d4
+ 0x20202020, // phyr1d8
+ 0x20202020, // phyr1dc
+ 0x20202020, // phyr1e0
+ 0x20202020, // phyr1e4
+ 0x00002020, // phyr1e8
+ 0xaeeddeea, // change address
+ 0x1e6e0304, // new address
+ 0x00000800, // phyr204
+ 0xaeeddeea, // change address
+ 0x1e6e027c, // new address
+ 0x4e400000, // phyr17c
+ 0x59595959, // phyr180
+ 0x40404040, // phyr184
+ 0xaeeddeea, // change address
+ 0x1e6e02f4, // new address
+ 0x00000059, // phyr1f4
+ 0xaeededed, // end
+};
+#endif
+
+/* MPLL configuration */
+#define SCU_MPLL_FREQ_400M 0x0008405F
+#define SCU_MPLL_EXT_400M 0x0000002F
+#define SCU_MPLL_FREQ_333M 0x00488299
+#define SCU_MPLL_EXT_333M 0x0000014C
+#define SCU_MPLL_FREQ_200M 0x0078007F
+#define SCU_MPLL_EXT_200M 0x0000003F
+#define SCU_MPLL_FREQ_100M 0x0078003F
+#define SCU_MPLL_EXT_100M 0x0000001F
+
+#if defined(CONFIG_ASPEED_DDR4_1600)
+#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_400M
+#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_400M
+#elif defined(CONFIG_ASPEED_DDR4_1333)
+#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_333M
+#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_333M
+#elif defined(CONFIG_ASPEED_DDR4_800)
+#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_200M
+#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_200M
+#elif defined(CONFIG_ASPEED_DDR4_400)
+#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_100M
+#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_100M
+#else
+#error "undefined DDR4 target rate\n"
+#endif
+
+/*
+ * AC timing and SDRAM mode register setting
+ * for real chip are derived from the model GDDR4-1600
+ */
+#define DDR4_MR01_MODE 0x03010510
+#define DDR4_MR23_MODE 0x00000000
+#define DDR4_MR45_MODE 0x04000000
+#define DDR4_MR6_MODE 0x00000400
+#define DDR4_TRFC_1600 0x467299f1
+#define DDR4_TRFC_1333 0x3a5f80c9
+#define DDR4_TRFC_800 0x23394c78
+#define DDR4_TRFC_400 0x111c263c
+
+#if defined(CONFIG_ASPEED_DDR4_1600)
+#define DDR4_TRFC DDR4_TRFC_1600
+#define DDR4_PHY_TRAIN_TRFC 0xc30
+#elif defined(CONFIG_ASPEED_DDR4_1333)
+#define DDR4_TRFC DDR4_TRFC_1333
+#define DDR4_PHY_TRAIN_TRFC 0xa25
+#elif defined(CONFIG_ASPEED_DDR4_800)
+#define DDR4_TRFC DDR4_TRFC_800
+#define DDR4_PHY_TRAIN_TRFC 0x618
+#elif defined(CONFIG_ASPEED_DDR4_400)
+#define DDR4_TRFC DDR4_TRFC_400
+#define DDR4_PHY_TRAIN_TRFC 0x30c
+#else
+#error "undefined tRFC setting"
+#endif
+
+/* supported SDRAM size */
+#define SDRAM_SIZE_1KB (1024U)
+#define SDRAM_SIZE_1MB (SDRAM_SIZE_1KB * SDRAM_SIZE_1KB)
+#define SDRAM_MIN_SIZE (256 * SDRAM_SIZE_1MB)
+#define SDRAM_MAX_SIZE (2048 * SDRAM_SIZE_1MB)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const u32 ddr4_ac_timing[4] = {
+ 0x040e0307, 0x0f4711f1, 0x0e060304, 0x00001240 };
+static const u32 ddr_max_grant_params[4] = {
+ 0x44444444, 0x44444444, 0x44444444, 0x44444444 };
+
+struct dram_info {
+ struct ram_info info;
+ struct clk ddr_clk;
+ struct ast2600_sdrammc_regs *regs;
+ struct ast2600_scu *scu;
+ struct ast2600_ddr_phy *phy;
+ void __iomem *phy_setting;
+ void __iomem *phy_status;
+ ulong clock_rate;
+};
+
+static void ast2600_sdramphy_kick_training(struct dram_info *info)
+{
+ u32 data;
+ struct ast2600_sdrammc_regs *regs = info->regs;
+
+ writel(SDRAM_PHYCTRL0_NRST, ®s->phy_ctrl[0]);
+ udelay(5);
+ writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]);
+ udelay(1000);
+
+ while (1) {
+ data = readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT;
+ if (~data)
+ break;
+ }
+}
+
+/**
+ * @brief load DDR-PHY configurations table to the PHY registers
+ * @param[in] p_tbl - pointer to the configuration table
+ * @param[in] info - pointer to the DRAM info struct
+ *
+ * There are two sets of MRS (Mode Registers) configuration in ast2600 memory
+ * system: one is in the SDRAM MC (memory controller) which is used in run
+ * time, and the other is in the DDR-PHY IP which is used during DDR-PHY
+ * training.
+ */
+static void ast2600_sdramphy_init(u32 *p_tbl, struct dram_info *info)
+{
+ u32 reg_base = (u32)info->phy_setting;
+ u32 addr = p_tbl[0];
+ u32 data;
+ int i = 1;
+
+ writel(0, &info->regs->phy_ctrl[0]);
+ udelay(10);
+
+ while (1) {
+ if (addr < reg_base) {
+ debug("invalid DDR-PHY addr: 0x%08x\n", addr);
+ break;
+ }
+ data = p_tbl[i++];
+
+ if (data == DDR_PHY_TBL_END) {
+ break;
+ } else if (data == DDR_PHY_TBL_CHG_ADDR) {
+ addr = p_tbl[i++];
+ } else {
+ writel(data, addr);
+ addr += 4;
+ }
+ }
+
+ data = readl(info->phy_setting + 0x84) & ~GENMASK(16, 0);
+ data |= DDR4_PHY_TRAIN_TRFC;
+ writel(data, info->phy_setting + 0x84);
+}
+
+static int ast2600_sdramphy_check_status(struct dram_info *info)
+{
+ u32 value, tmp;
+ u32 reg_base = (u32)info->phy_status;
+ int need_retrain = 0;
+
+ debug("\nSDRAM PHY training report:\n");
+
+ /* training status */
+ value = readl(reg_base + 0x00);
+ debug("rO_DDRPHY_reg offset 0x00 = 0x%08x\n", value);
+
+ if (value & BIT(3))
+ debug("\tinitial PVT calibration fail\n");
+
+ if (value & BIT(5))
+ debug("\truntime calibration fail\n");
+
+ /* PU & PD */
+ value = readl(reg_base + 0x30);
+ debug("rO_DDRPHY_reg offset 0x30 = 0x%08x\n", value);
+ debug(" PU = 0x%02x\n", value & 0xff);
+ debug(" PD = 0x%02x\n", (value >> 16) & 0xff);
+
+ /* read eye window */
+ value = readl(reg_base + 0x68);
+ if (0 == (value & GENMASK(7, 0)))
+ need_retrain = 1;
+
+ debug("rO_DDRPHY_reg offset 0x68 = 0x%08x\n", value);
+ debug(" rising edge of read data eye training pass window\n");
+ tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
+ debug(" B0:%d%%\n", tmp);
+ tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
+ debug(" B1:%d%%\n", tmp);
+
+ value = readl(reg_base + 0xC8);
+ debug("rO_DDRPHY_reg offset 0xC8 = 0x%08x\n", value);
+ debug(" falling edge of read data eye training pass window\n");
+ tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
+ debug(" B0:%d%%\n", tmp);
+ tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
+ debug(" B1:%d%%\n", tmp);
+
+ /* write eye window */
+ value = readl(reg_base + 0x7c);
+ if (0 == (value & GENMASK(7, 0)))
+ need_retrain = 1;
+
+ debug("rO_DDRPHY_reg offset 0x7C = 0x%08x\n", value);
+ debug(" rising edge of write data eye training pass window\n");
+ tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255;
+ debug(" B0:%d%%\n", tmp);
+ tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255;
+ debug(" B1:%d%%\n", tmp);
+
+ /* read Vref training result */
+ value = readl(reg_base + 0x88);
+ debug("rO_DDRPHY_reg offset 0x88 = 0x%08x\n", value);
+ debug(" read Vref training result\n");
+ tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 127;
+ debug(" B0:%d%%\n", tmp);
+ tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 127;
+ debug(" B1:%d%%\n", tmp);
+
+ /* write Vref training result */
+ value = readl(reg_base + 0x90);
+ debug("rO_DDRPHY_reg offset 0x90 = 0x%08x\n", value);
+
+ /* gate train */
+ value = readl(reg_base + 0x50);
+ if ((0 == (value & GENMASK(15, 0))) ||
+ (0 == (value & GENMASK(31, 16)))) {
+ need_retrain = 1;
+ }
+
+ debug("rO_DDRPHY_reg offset 0x50 = 0x%08x\n", value);
+
+ return need_retrain;
+}
+
+#ifndef CONFIG_ASPEED_BYPASS_SELFTEST
+#define MC_TEST_PATTERN_N 8
+static u32 as2600_sdrammc_test_pattern[MC_TEST_PATTERN_N] = {
+ 0xcc33cc33, 0xff00ff00, 0xaa55aa55, 0x88778877,
+ 0x92cc4d6e, 0x543d3cde, 0xf1e843c7, 0x7c61d253 };
+
+#define TIMEOUT_DRAM 5000000
+int ast2600_sdrammc_dg_test(struct dram_info *info, unsigned int datagen, u32 mode)
+{
+ unsigned int data;
+ unsigned int timeout = 0;
+ struct ast2600_sdrammc_regs *regs = info->regs;
+
+ writel(0, ®s->ecc_test_ctrl);
+
+ if (mode == 0)
+ writel(0x00000085 | (datagen << 3), ®s->ecc_test_ctrl);
+ else
+ writel(0x000000C1 | (datagen << 3), ®s->ecc_test_ctrl);
+
+ do {
+ data = readl(®s->ecc_test_ctrl) & GENMASK(13, 12);
+
+ if (data & BIT(13))
+ return 0;
+
+ if (++timeout > TIMEOUT_DRAM) {
+ debug("Timeout!!\n");
+ writel(0, ®s->ecc_test_ctrl);
+ return -1;
+ }
+ } while (!data);
+
+ writel(0, ®s->ecc_test_ctrl);
+
+ return 0;
+}
+
+int ast2600_sdrammc_cbr_test(struct dram_info *info)
+{
+ u32 i;
+ struct ast2600_sdrammc_regs *regs = info->regs;
+
+ clrsetbits_le32(®s->test_addr, GENMASK(30, 4), 0x7ffff0);
+
+ /* single */
+ for (i = 0; i < 8; i++)
+ if (ast2600_sdrammc_dg_test(info, i, 0))
+ return -1;
+
+ /* burst */
+ for (i = 0; i < 8; i++)
+ if (ast2600_sdrammc_dg_test(info, i, i))
+ return -1;
+
+ return 0;
+}
+
+static int ast2600_sdrammc_test(struct dram_info *info)
+{
+ struct ast2600_sdrammc_regs *regs = info->regs;
+
+ u32 pass_cnt = 0;
+ u32 fail_cnt = 0;
+ u32 target_cnt = 2;
+ u32 test_cnt = 0;
+ u32 pattern;
+ u32 i = 0;
+ bool finish = false;
+
+ debug("sdram mc test:\n");
+ while (!finish) {
+ pattern = as2600_sdrammc_test_pattern[i++];
+ i = i % MC_TEST_PATTERN_N;
+ debug(" pattern = %08X : ", pattern);
+ writel(pattern, ®s->test_init_val);
+
+ if (ast2600_sdrammc_cbr_test(info)) {
+ debug("fail\n");
+ fail_cnt++;
+ } else {
+ debug("pass\n");
+ pass_cnt++;
+ }
+
+ if (++test_cnt == target_cnt)
+ finish = true;
+ }
+ debug("statistics: pass/fail/total:%d/%d/%d\n", pass_cnt, fail_cnt,
+ target_cnt);
+
+ return fail_cnt;
+}
+#endif
+
+/*
+ * scu500[14:13]
+ * 2b'00: VGA memory size = 16MB
+ * 2b'01: VGA memory size = 16MB
+ * 2b'10: VGA memory size = 32MB
+ * 2b'11: VGA memory size = 64MB
+ *
+ * mcr04[3:2]
+ * 2b'00: VGA memory size = 8MB
+ * 2b'01: VGA memory size = 16MB
+ * 2b'10: VGA memory size = 32MB
+ * 2b'11: VGA memory size = 64MB
+ */
+static size_t ast2600_sdrammc_get_vga_mem_size(struct dram_info *info)
+{
+ u32 vga_hwconf;
+ size_t vga_mem_size_base = 8 * 1024 * 1024;
+
+ vga_hwconf =
+ (readl(&info->scu->hwstrap1) & SCU_HWSTRAP1_VGA_MEM_MASK) >>
+ SCU_HWSTRAP1_VGA_MEM_SHIFT;
+
+ if (vga_hwconf == 0) {
+ vga_hwconf = 1;
+ writel(vga_hwconf << SCU_HWSTRAP1_VGA_MEM_SHIFT,
+ &info->scu->hwstrap1);
+ }
+
+ clrsetbits_le32(&info->regs->config, SDRAM_CONF_VGA_SIZE_MASK,
+ ((vga_hwconf << SDRAM_CONF_VGA_SIZE_SHIFT) &
+ SDRAM_CONF_VGA_SIZE_MASK));
+
+ /* no need to reserve VGA memory if efuse[VGA disable] is set */
+ if (readl(&info->scu->efuse) & SCU_EFUSE_DIS_VGA)
+ return 0;
+
+ return vga_mem_size_base << vga_hwconf;
+}
+
+/*
+ * Find out RAM size and save it in dram_info
+ *
+ * The procedure is taken from Aspeed SDK
+ */
+static void ast2600_sdrammc_calc_size(struct dram_info *info)
+{
+ /* The controller supports 256/512/1024/2048 MB ram */
+ size_t ram_size = SDRAM_MIN_SIZE;
+ const int write_test_offset = 0x100000;
+ u32 test_pattern = 0xdeadbeef;
+ u32 cap_param = SDRAM_CONF_CAP_2048M;
+ u32 refresh_timing_param = DDR4_TRFC;
+ const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
+
+ for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
+ ram_size >>= 1) {
+ writel(test_pattern, write_addr_base + (ram_size >> 1));
+ test_pattern = (test_pattern >> 4) | (test_pattern << 28);
+ }
+
+ /* One last write to overwrite all wrapped values */
+ writel(test_pattern, write_addr_base);
+
+ /* Reset the pattern and see which value was really written */
+ test_pattern = 0xdeadbeef;
+ for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
+ ram_size >>= 1) {
+ if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
+ break;
+
+ --cap_param;
+ refresh_timing_param >>= 8;
+ test_pattern = (test_pattern >> 4) | (test_pattern << 28);
+ }
+
+ clrsetbits_le32(&info->regs->ac_timing[1],
+ (SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
+ ((refresh_timing_param & SDRAM_AC_TRFC_MASK)
+ << SDRAM_AC_TRFC_SHIFT));
+
+ info->info.base = CONFIG_SYS_SDRAM_BASE;
+ info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info);
+
+ clrsetbits_le32(&info->regs->config, SDRAM_CONF_CAP_MASK,
+ ((cap_param << SDRAM_CONF_CAP_SHIFT) & SDRAM_CONF_CAP_MASK));
+}
+
+static int ast2600_sdrammc_init_ddr4(struct dram_info *info)
+{
+ const u32 power_ctrl = MCR34_CKE_EN | MCR34_AUTOPWRDN_EN |
+ MCR34_MREQ_BYPASS_DIS | MCR34_RESETN_DIS |
+ MCR34_ODT_EN | MCR34_ODT_AUTO_ON |
+ (0x1 << MCR34_ODT_EXT_SHIFT);
+
+ /* init SDRAM-PHY only on real chip */
+ ast2600_sdramphy_init(ast2600_sdramphy_config, info);
+ writel((MCR34_CKE_EN | MCR34_MREQI_DIS | MCR34_RESETN_DIS),
+ &info->regs->power_ctrl);
+ udelay(5);
+ ast2600_sdramphy_kick_training(info);
+ udelay(500);
+ writel(SDRAM_RESET_DLL_ZQCL_EN, &info->regs->refresh_timing);
+
+ writel(MCR30_SET_MR(3), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(6), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(5), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(4), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(2), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(1), &info->regs->mode_setting_control);
+ writel(MCR30_SET_MR(0) | MCR30_RESET_DLL_DELAY_EN,
+ &info->regs->mode_setting_control);
+
+ writel(SDRAM_REFRESH_EN | SDRAM_RESET_DLL_ZQCL_EN |
+ (0x5f << SDRAM_REFRESH_PERIOD_SHIFT),
+ &info->regs->refresh_timing);
+
+ /* wait self-refresh idle */
+ while (readl(&info->regs->power_ctrl) &
+ MCR34_SELF_REFRESH_STATUS_MASK)
+ ;
+
+ writel(SDRAM_REFRESH_EN | SDRAM_LOW_PRI_REFRESH_EN |
+ SDRAM_REFRESH_ZQCS_EN |
+ (0x5f << SDRAM_REFRESH_PERIOD_SHIFT) |
+ (0x42aa << SDRAM_REFRESH_PERIOD_ZQCS_SHIFT),
+ &info->regs->refresh_timing);
+
+ writel(power_ctrl, &info->regs->power_ctrl);
+ udelay(500);
+
+ return 0;
+}
+
+static void ast2600_sdrammc_unlock(struct dram_info *info)
+{
+ writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
+ while (!readl(&info->regs->protection_key))
+ ;
+}
+
+static void ast2600_sdrammc_lock(struct dram_info *info)
+{
+ writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
+ while (readl(&info->regs->protection_key))
+ ;
+}
+
+static void ast2600_sdrammc_common_init(struct ast2600_sdrammc_regs *regs)
+{
+ int i;
+
+ writel(MCR34_MREQI_DIS | MCR34_RESETN_DIS, ®s->power_ctrl);
+ writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key);
+ writel(0x10 << MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT,
+ ®s->arbitration_ctrl);
+ writel(0xFFBBFFF4, ®s->req_limit_mask);
+
+ for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
+ writel(ddr_max_grant_params[i], ®s->max_grant_len[i]);
+
+ writel(MCR50_RESET_ALL_INTR, ®s->intr_ctrl);
+
+ writel(0x07FFFFFF, ®s->ecc_range_ctrl);
+
+ writel(0, ®s->ecc_test_ctrl);
+ writel(0x80000001, ®s->test_addr);
+ writel(0, ®s->test_fail_dq_bit);
+ writel(0, ®s->test_init_val);
+
+ writel(0xFFFFFFFF, ®s->req_input_ctrl);
+ writel(0, ®s->req_high_pri_ctrl);
+
+ udelay(600);
+
+#ifdef CONFIG_ASPEED_DDR4_DUALX8
+ writel(0x37, ®s->config);
+#else
+ writel(0x17, ®s->config);
+#endif
+
+ /* load controller setting */
+ for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
+ writel(ddr4_ac_timing[i], ®s->ac_timing[i]);
+
+ writel(DDR4_MR01_MODE, ®s->mr01_mode_setting);
+ writel(DDR4_MR23_MODE, ®s->mr23_mode_setting);
+ writel(DDR4_MR45_MODE, ®s->mr45_mode_setting);
+ writel(DDR4_MR6_MODE, ®s->mr6_mode_setting);
+}
+
+/*
+ * Update size info according to the ECC HW setting
+ *
+ * Assume SDRAM has been initialized by SPL or the host. To get the RAM size, we
+ * don't need to calculate the ECC size again but read from MCR04 and derive the
+ * size from its value.
+ */
+static void ast2600_sdrammc_update_size(struct dram_info *info)
+{
+ struct ast2600_sdrammc_regs *regs = info->regs;
+ u32 conf = readl(®s->config);
+ u32 cap_param;
+ size_t ram_size = SDRAM_MAX_SIZE;
+ size_t hw_size;
+
+ cap_param = (conf & SDRAM_CONF_CAP_MASK) >> SDRAM_CONF_CAP_SHIFT;
+ switch (cap_param) {
+ case SDRAM_CONF_CAP_2048M:
+ ram_size = 2048 * SDRAM_SIZE_1MB;
+ break;
+ case SDRAM_CONF_CAP_1024M:
+ ram_size = 1024 * SDRAM_SIZE_1MB;
+ break;
+ case SDRAM_CONF_CAP_512M:
+ ram_size = 512 * SDRAM_SIZE_1MB;
+ break;
+ case SDRAM_CONF_CAP_256M:
+ ram_size = 256 * SDRAM_SIZE_1MB;
+ break;
+ }
+
+ info->info.base = CONFIG_SYS_SDRAM_BASE;
+ info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info);
+
+ if (0 == (conf & SDRAM_CONF_ECC_SETUP))
+ return;
+
+ hw_size = readl(®s->ecc_range_ctrl) & SDRAM_ECC_RANGE_ADDR_MASK;
+ hw_size += (1 << SDRAM_ECC_RANGE_ADDR_SHIFT);
+
+ info->info.size = hw_size;
+}
+
+#ifdef CONFIG_ASPEED_ECC
+static void ast2600_sdrammc_ecc_enable(struct dram_info *info)
+{
+ struct ast2600_sdrammc_regs *regs = info->regs;
+ size_t conf_size;
+ u32 reg;
+
+ conf_size = CONFIG_ASPEED_ECC_SIZE * SDRAM_SIZE_1MB;
+ if (conf_size > info->info.size) {
+ printf("warning: ECC configured %dMB but actual size is %dMB\n",
+ CONFIG_ASPEED_ECC_SIZE,
+ info->info.size / SDRAM_SIZE_1MB);
+ conf_size = info->info.size;
+ } else if (conf_size == 0) {
+ conf_size = info->info.size;
+ }
+
+ info->info.size = (((conf_size / 9) * 8) >> 20) << 20;
+ writel(((info->info.size >> 20) - 1) << 20, ®s->ecc_range_ctrl);
+ reg = readl(®s->config) | SDRAM_CONF_ECC_SETUP;
+ writel(reg, ®s->config);
+
+ writel(0, ®s->test_init_val);
+ writel(0x80000001, ®s->test_addr);
+ writel(0x221, ®s->ecc_test_ctrl);
+ while (0 == (readl(®s->ecc_test_ctrl) & BIT(12)))
+ ;
+ writel(0, ®s->ecc_test_ctrl);
+ writel(BIT(31), ®s->intr_ctrl);
+ writel(0, ®s->intr_ctrl);
+}
+#endif
+
+static int ast2600_sdrammc_probe(struct udevice *dev)
+{
+ int ret;
+ u32 reg;
+ struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
+ struct ast2600_sdrammc_regs *regs = priv->regs;
+ struct udevice *clk_dev;
+
+ /* find SCU base address from clock device */
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_DRIVER_GET(aspeed_ast2600_scu), &clk_dev);
+ if (ret) {
+ debug("clock device not defined\n");
+ return ret;
+ }
+
+ priv->scu = devfdt_get_addr_ptr(clk_dev);
+ if (IS_ERR(priv->scu)) {
+ debug("%s(): can't get SCU\n", __func__);
+ return PTR_ERR(priv->scu);
+ }
+
+ if (readl(&priv->scu->dram_hdshk) & SCU_DRAM_HDSHK_RDY) {
+ printf("already initialized, ");
+ ast2600_sdrammc_update_size(priv);
+ return 0;
+ }
+
+ reg = readl(&priv->scu->mpll);
+ reg &= ~(SCU_PLL_BYPASS | SCU_PLL_DIV_MASK |
+ SCU_PLL_DENUM_MASK | SCU_PLL_NUM_MASK);
+ reg |= (SCU_PLL_RST | SCU_PLL_OFF | SCU_MPLL_FREQ_CFG);
+ writel(reg, &priv->scu->mpll);
+ writel(SCU_MPLL_EXT_CFG, &priv->scu->mpll_ext);
+ udelay(100);
+ reg &= ~(SCU_PLL_RST | SCU_PLL_OFF);
+ writel(reg, &priv->scu->mpll);
+
+ while ((readl(&priv->scu->mpll_ext) & BIT(31)) == 0)
+ ;
+
+ ast2600_sdrammc_unlock(priv);
+ ast2600_sdrammc_common_init(regs);
+L_ast2600_sdramphy_train:
+ ast2600_sdrammc_init_ddr4(priv);
+
+ /* make sure DDR-PHY is ready before access */
+ do {
+ reg = readl(priv->phy_status) & BIT(1);
+ } while (reg == 0);
+
+ if (ast2600_sdramphy_check_status(priv) != 0) {
+ printf("DDR4 PHY training fail, retrain\n");
+ goto L_ast2600_sdramphy_train;
+ }
+
+ ast2600_sdrammc_calc_size(priv);
+
+#ifndef CONFIG_ASPEED_BYPASS_SELFTEST
+ if (ast2600_sdrammc_test(priv) != 0) {
+ printf("%s: DDR4 init fail\n", __func__);
+ return -EINVAL;
+ }
+#endif
+
+#ifdef CONFIG_ASPEED_ECC
+ ast2600_sdrammc_ecc_enable(priv);
+#endif
+
+ writel(readl(&priv->scu->dram_hdshk) | SCU_DRAM_HDSHK_RDY,
+ &priv->scu->dram_hdshk);
+
+ clrbits_le32(®s->intr_ctrl, MCR50_RESET_ALL_INTR);
+ ast2600_sdrammc_lock(priv);
+ return 0;
+}
+
+static int ast2600_sdrammc_of_to_plat(struct udevice *dev)
+{
+ struct dram_info *priv = dev_get_priv(dev);
+
+ priv->regs = (void *)(uintptr_t)devfdt_get_addr_index(dev, 0);
+ priv->phy_setting = (void *)(uintptr_t)devfdt_get_addr_index(dev, 1);
+ priv->phy_status = (void *)(uintptr_t)devfdt_get_addr_index(dev, 2);
+
+ priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "clock-frequency", 0);
+ if (!priv->clock_rate) {
+ debug("DDR Clock Rate not defined\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ast2600_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
+{
+ struct dram_info *priv = dev_get_priv(dev);
+
+ *info = priv->info;
+
+ return 0;
+}
+
+static struct ram_ops ast2600_sdrammc_ops = {
+ .get_info = ast2600_sdrammc_get_info,
+};
+
+static const struct udevice_id ast2600_sdrammc_ids[] = {
+ { .compatible = "aspeed,ast2600-sdrammc" },
+ { }
+};
+
+U_BOOT_DRIVER(sdrammc_ast2600) = {
+ .name = "aspeed_ast2600_sdrammc",
+ .id = UCLASS_RAM,
+ .of_match = ast2600_sdrammc_ids,
+ .ops = &ast2600_sdrammc_ops,
+ .of_to_plat = ast2600_sdrammc_of_to_plat,
+ .probe = ast2600_sdrammc_probe,
+ .priv_auto = sizeof(struct dram_info),
+};
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 33c2736..f5b3f88 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -81,6 +81,15 @@
Say Y if you want to control reset signals of different peripherals
through System Control Unit (SCU).
+config RESET_AST2600
+ bool "Reset controller driver for AST2600 SoCs"
+ depends on DM_RESET
+ default y if ASPEED_AST2600
+ help
+ Support for reset controller on AST2600 SoC.
+ Say Y if you want to control reset signals of different peripherals
+ through System Control Unit (SCU).
+
config RESET_ROCKCHIP
bool "Reset controller driver for Rockchip SoCs"
depends on DM_RESET && ARCH_ROCKCHIP && CLK
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index fa52aa3..8a0f528 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_AST2500) += reset-ast2500.o
+obj-$(CONFIG_RESET_AST2600) += reset-ast2600.o
obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-ast2600.c b/drivers/reset/reset-ast2600.c
new file mode 100644
index 0000000..f64adaf
--- /dev/null
+++ b/drivers/reset/reset-ast2600.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 ASPEED Technology Inc.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <misc.h>
+#include <reset.h>
+#include <reset-uclass.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2600.h>
+
+struct ast2600_reset_priv {
+ struct ast2600_scu *scu;
+};
+
+static int ast2600_reset_request(struct reset_ctl *reset_ctl)
+{
+ debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl,
+ reset_ctl->dev, reset_ctl->id);
+
+ return 0;
+}
+
+static int ast2600_reset_free(struct reset_ctl *reset_ctl)
+{
+ debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl,
+ reset_ctl->dev, reset_ctl->id);
+
+ return 0;
+}
+
+static int ast2600_reset_assert(struct reset_ctl *reset_ctl)
+{
+ struct ast2600_reset_priv *priv = dev_get_priv(reset_ctl->dev);
+ struct ast2600_scu *scu = priv->scu;
+
+ debug("%s: reset_ctl->id: %lu\n", __func__, reset_ctl->id);
+
+ if (reset_ctl->id < 32)
+ writel(BIT(reset_ctl->id), scu->modrst_ctrl1);
+ else
+ writel(BIT(reset_ctl->id - 32), scu->modrst_ctrl2);
+
+ return 0;
+}
+
+static int ast2600_reset_deassert(struct reset_ctl *reset_ctl)
+{
+ struct ast2600_reset_priv *priv = dev_get_priv(reset_ctl->dev);
+ struct ast2600_scu *scu = priv->scu;
+
+ debug("%s: reset_ctl->id: %lu\n", __func__, reset_ctl->id);
+
+ if (reset_ctl->id < 32)
+ writel(BIT(reset_ctl->id), scu->modrst_clr1);
+ else
+ writel(BIT(reset_ctl->id - 32), scu->modrst_clr2);
+
+ return 0;
+}
+
+static int ast2600_reset_probe(struct udevice *dev)
+{
+ int rc;
+ struct ast2600_reset_priv *priv = dev_get_priv(dev);
+ struct udevice *scu_dev;
+
+ /* get SCU base from clock device */
+ rc = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev);
+ if (rc) {
+ debug("%s: clock device not found, rc=%d\n", __func__, rc);
+ return rc;
+ }
+
+ priv->scu = devfdt_get_addr_ptr(scu_dev);
+ if (IS_ERR_OR_NULL(priv->scu)) {
+ debug("%s: invalid SCU base pointer\n", __func__);
+ return PTR_ERR(priv->scu);
+ }
+
+ return 0;
+}
+
+static const struct udevice_id ast2600_reset_ids[] = {
+ { .compatible = "aspeed,ast2600-reset" },
+ { }
+};
+
+struct reset_ops ast2600_reset_ops = {
+ .request = ast2600_reset_request,
+ .rfree = ast2600_reset_free,
+ .rst_assert = ast2600_reset_assert,
+ .rst_deassert = ast2600_reset_deassert,
+};
+
+U_BOOT_DRIVER(ast2600_reset) = {
+ .name = "ast2600_reset",
+ .id = UCLASS_RESET,
+ .of_match = ast2600_reset_ids,
+ .probe = ast2600_reset_probe,
+ .ops = &ast2600_reset_ops,
+ .priv_auto = sizeof(struct ast2600_reset_priv),
+};
diff --git a/drivers/sysreset/sysreset_ast.c b/drivers/sysreset/sysreset_ast.c
index ee941c7..d747ed0 100644
--- a/drivers/sysreset/sysreset_ast.c
+++ b/drivers/sysreset/sysreset_ast.c
@@ -12,6 +12,7 @@
#include <asm/io.h>
#include <asm/arch/wdt.h>
#include <linux/err.h>
+#include <hang.h>
static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type)
{
@@ -33,11 +34,15 @@
return -EPROTONOSUPPORT;
}
+#if !defined(CONFIG_SPL_BUILD)
ret = wdt_expire_now(wdt, reset_mode);
if (ret) {
debug("Sysreset failed: %d", ret);
return ret;
}
+#else
+ hang();
+#endif
return -EINPROGRESS;
}
diff --git a/drivers/timer/mtk_timer.c b/drivers/timer/mtk_timer.c
index 448a76a..f6b97f8 100644
--- a/drivers/timer/mtk_timer.c
+++ b/drivers/timer/mtk_timer.c
@@ -61,6 +61,16 @@
if (!uc_priv->clock_rate)
return -EINVAL;
+ /*
+ * Initialize the timer:
+ * 1. set clock source to system clock with clock divider setting to 1
+ * 2. set timer mode to free running
+ * 3. reset timer counter to 0 then enable the timer
+ */
+ writel(GPT4_CLK_SYS | GPT4_CLK_DIV1, priv->base + MTK_GPT4_CLK);
+ writel(GPT4_FREERUN | GPT4_CLEAR | GPT4_ENABLE,
+ priv->base + MTK_GPT4_CTRL);
+
return 0;
}
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4532a40..d5edabf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -86,6 +86,15 @@
It currently does not support Boot Flash Addressing Mode Detection or
Second Boot.
+config WDT_AST2600
+ bool "Aspeed AST2600 watchdog timer support"
+ depends on WDT
+ default y if ASPEED_AST2600
+ help
+ Select this to enable watchdog timer for Aspeed ast2500/ast2400 devices.
+ The watchdog timer is stopped when initialized. It performs reset, either
+ full SoC reset or CPU or just some peripherals, based on the flags.
+
config WDT_AT91
bool "AT91 watchdog timer support"
depends on WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 01b8231..cbb6d84 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
+obj-$(CONFIG_WDT_AST2600) += ast2600_wdt.o
obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
obj-$(CONFIG_WDT_ORION) += orion_wdt.o
diff --git a/drivers/watchdog/ast2600_wdt.c b/drivers/watchdog/ast2600_wdt.c
new file mode 100644
index 0000000..bc98420
--- /dev/null
+++ b/drivers/watchdog/ast2600_wdt.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Aspeed Technology, Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <wdt.h>
+#include <asm/io.h>
+#include <asm/arch/wdt_ast2600.h>
+#include <linux/err.h>
+
+struct ast2600_wdt_priv {
+ struct ast2600_wdt *regs;
+};
+
+static int ast2600_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ /* WDT counts in the 1MHz frequency, namely 1us */
+ writel((u32)(timeout_ms * 1000), &wdt->counter_reload_val);
+ writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+ writel(WDT_CTRL_EN | WDT_CTRL_RESET, &wdt->ctrl);
+
+ return 0;
+}
+
+static int ast2600_wdt_stop(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ clrbits_le32(&wdt->ctrl, WDT_CTRL_EN);
+
+ writel(WDT_RESET_MASK1_DEFAULT, &wdt->reset_mask1);
+ writel(WDT_RESET_MASK2_DEFAULT, &wdt->reset_mask2);
+
+ return 0;
+}
+
+static int ast2600_wdt_reset(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+
+ return 0;
+}
+
+static int ast2600_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+ int ret;
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ ret = ast2600_wdt_start(dev, 1, flags);
+ if (ret)
+ return ret;
+
+ while (readl(&wdt->ctrl) & WDT_CTRL_EN)
+ ;
+
+ return ast2600_wdt_stop(dev);
+}
+
+static int ast2600_wdt_of_to_plat(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->regs = dev_read_addr_ptr(dev);
+ if (!priv->regs)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct wdt_ops ast2600_wdt_ops = {
+ .start = ast2600_wdt_start,
+ .reset = ast2600_wdt_reset,
+ .stop = ast2600_wdt_stop,
+ .expire_now = ast2600_wdt_expire_now,
+};
+
+static const struct udevice_id ast2600_wdt_ids[] = {
+ { .compatible = "aspeed,ast2600-wdt" },
+ { }
+};
+
+static int ast2600_wdt_probe(struct udevice *dev)
+{
+ debug("%s() wdt%u\n", __func__, dev_seq(dev));
+ ast2600_wdt_stop(dev);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ast2600_wdt) = {
+ .name = "ast2600_wdt",
+ .id = UCLASS_WDT,
+ .of_match = ast2600_wdt_ids,
+ .probe = ast2600_wdt_probe,
+ .priv_auto = sizeof(struct ast2600_wdt_priv),
+ .of_to_plat = ast2600_wdt_of_to_plat,
+ .ops = &ast2600_wdt_ops,
+};
diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h
new file mode 100644
index 0000000..e7975bf
--- /dev/null
+++ b/include/configs/evb_ast2600.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/aspeed-common.h>
+
+#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+
+/* Memory Info */
+#define CONFIG_SYS_LOAD_ADDR 0x83000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h
index 34235b5..710731e 100644
--- a/include/configs/presidio_asic.h
+++ b/include/configs/presidio_asic.h
@@ -67,4 +67,13 @@
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0"
+/* nand driver parameters */
+#ifdef CONFIG_TARGET_PRESIDIO_ASIC
+ #define CONFIG_SYS_NAND_ONFI_DETECTION
+ #define CONFIG_SYS_MAX_NAND_DEVICE 1
+ #define CONFIG_SYS_NAND_MAX_CHIPS 1
+ #define CONFIG_SYS_NAND_BASE CONFIG_SYS_FLASH_BASE
+ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#endif
+
#endif /* __PRESIDIO_ASIC_H */
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
new file mode 100644
index 0000000..36294a5
--- /dev/null
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_LCLK 6
+#define ASPEED_CLK_GATE_YCLK 7
+#define ASPEED_CLK_GATE_LHCCLK 8
+#define ASPEED_CLK_GATE_REFCLK 9
+#define ASPEED_CLK_GATE_ESPICLK 10
+#define ASPEED_CLK_GATE_UART1CLK 11
+#define ASPEED_CLK_GATE_UART2CLK 12
+#define ASPEED_CLK_GATE_UART3CLK 13
+#define ASPEED_CLK_GATE_UART4CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_UART6CLK 16
+#define ASPEED_CLK_GATE_UART7CLK 17
+#define ASPEED_CLK_GATE_UART8CLK 18
+#define ASPEED_CLK_GATE_UART9CLK 19
+#define ASPEED_CLK_GATE_UART10CLK 20
+#define ASPEED_CLK_GATE_UART11CLK 21
+#define ASPEED_CLK_GATE_UART12CLK 22
+#define ASPEED_CLK_GATE_UART13CLK 23
+#define ASPEED_CLK_GATE_MAC1CLK 24
+#define ASPEED_CLK_GATE_MAC2CLK 25
+#define ASPEED_CLK_GATE_MAC3CLK 26
+#define ASPEED_CLK_GATE_MAC4CLK 27
+#define ASPEED_CLK_GATE_RSACLK 28
+#define ASPEED_CLK_GATE_SDCLK 29
+#define ASPEED_CLK_GATE_SDEXTCLK 30
+#define ASPEED_CLK_GATE_EMMCCLK 31
+#define ASPEED_CLK_GATE_EMMCEXTCLK 32
+#define ASPEED_CLK_GATE_USBUHCICLK 33
+#define ASPEED_CLK_GATE_USBPORT1CLK 34
+#define ASPEED_CLK_GATE_USBPORT2CLK 35
+#define ASPEED_CLK_GATE_FSICLK 36
+
+#define ASPEED_CLK_APLL 37
+#define ASPEED_CLK_EPLL 38
+#define ASPEED_CLK_DPLL 39
+#define ASPEED_CLK_HPLL 40
+#define ASPEED_CLK_AHB 41
+#define ASPEED_CLK_APB1 42
+#define ASPEED_CLK_APB2 43
+#define ASPEED_CLK_UART 44
+#define ASPEED_CLK_SDIO 45
+#define ASPEED_CLK_ECLK 46
+#define ASPEED_CLK_ECLK_MUX 47
+#define ASPEED_CLK_LHCLK 48
+#define ASPEED_CLK_MAC 49
+#define ASPEED_CLK_BCLK 50
+#define ASPEED_CLK_MPLL 51
+#define ASPEED_CLK_24M 52
+#define ASPEED_CLK_EMMC 53
+#define ASPEED_CLK_UARTX 54
+#define ASPEED_CLK_HUARTX 55
diff --git a/include/dt-bindings/clock/mt8183-clk.h b/include/dt-bindings/clock/mt8183-clk.h
new file mode 100644
index 0000000..f7e6367
--- /dev/null
+++ b/include/dt-bindings/clock/mt8183-clk.h
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Weiyi Lu <weiyi.lu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8183_H
+#define _DT_BINDINGS_CLK_MT8183_H
+
+/* APMIXED */
+#define CLK_APMIXED_ARMPLL_LL 0
+#define CLK_APMIXED_ARMPLL_L 1
+#define CLK_APMIXED_CCIPLL 2
+#define CLK_APMIXED_MAINPLL 3
+#define CLK_APMIXED_UNIV2PLL 4
+#define CLK_APMIXED_MSDCPLL 5
+#define CLK_APMIXED_MMPLL 6
+#define CLK_APMIXED_MFGPLL 7
+#define CLK_APMIXED_TVDPLL 8
+#define CLK_APMIXED_APLL1 9
+#define CLK_APMIXED_APLL2 10
+#define CLK_APMIXED_SSUSB_26M 11
+#define CLK_APMIXED_APPLL_26M 12
+#define CLK_APMIXED_MIPIC0_26M 13
+#define CLK_APMIXED_MDPLLGP_26M 14
+#define CLK_APMIXED_MMSYS_26M 15
+#define CLK_APMIXED_UFS_26M 16
+#define CLK_APMIXED_MIPIC1_26M 17
+#define CLK_APMIXED_MEMPLL_26M 18
+#define CLK_APMIXED_CLKSQ_LVPLL_26M 19
+#define CLK_APMIXED_MIPID0_26M 20
+#define CLK_APMIXED_MIPID1_26M 21
+#define CLK_APMIXED_NR_CLK 22
+
+/* TOPCKGEN */
+#define CLK_TOP_CLK26M 0
+#define CLK_TOP_ULPOSC 1
+#define CLK_TOP_UNIVP_192M 2
+#define CLK_TOP_CLK13M 3
+#define CLK_TOP_F26M_CK_D2 4
+#define CLK_TOP_SYSPLL_CK 5
+#define CLK_TOP_SYSPLL_D2 6
+#define CLK_TOP_SYSPLL_D3 7
+#define CLK_TOP_SYSPLL_D5 8
+#define CLK_TOP_SYSPLL_D7 9
+#define CLK_TOP_SYSPLL_D2_D2 10
+#define CLK_TOP_SYSPLL_D2_D4 11
+#define CLK_TOP_SYSPLL_D2_D8 12
+#define CLK_TOP_SYSPLL_D2_D16 13
+#define CLK_TOP_SYSPLL_D3_D2 14
+#define CLK_TOP_SYSPLL_D3_D4 15
+#define CLK_TOP_SYSPLL_D3_D8 16
+#define CLK_TOP_SYSPLL_D5_D2 17
+#define CLK_TOP_SYSPLL_D5_D4 18
+#define CLK_TOP_SYSPLL_D7_D2 19
+#define CLK_TOP_SYSPLL_D7_D4 20
+#define CLK_TOP_UNIVPLL_CK 21
+#define CLK_TOP_UNIVPLL_D2 22
+#define CLK_TOP_UNIVPLL_D3 23
+#define CLK_TOP_UNIVPLL_D5 24
+#define CLK_TOP_UNIVPLL_D7 25
+#define CLK_TOP_UNIVPLL_D2_D2 26
+#define CLK_TOP_UNIVPLL_D2_D4 27
+#define CLK_TOP_UNIVPLL_D2_D8 28
+#define CLK_TOP_UNIVPLL_D3_D2 29
+#define CLK_TOP_UNIVPLL_D3_D4 30
+#define CLK_TOP_UNIVPLL_D3_D8 31
+#define CLK_TOP_UNIVPLL_D5_D2 32
+#define CLK_TOP_UNIVPLL_D5_D4 33
+#define CLK_TOP_UNIVPLL_D5_D8 34
+#define CLK_TOP_UNIVP_192M_CK 35
+#define CLK_TOP_UNIVP_192M_D2 36
+#define CLK_TOP_UNIVP_192M_D4 37
+#define CLK_TOP_UNIVP_192M_D8 38
+#define CLK_TOP_UNIVP_192M_D16 39
+#define CLK_TOP_UNIVP_192M_D32 40
+#define CLK_TOP_APLL1_CK 41
+#define CLK_TOP_APLL1_D2 42
+#define CLK_TOP_APLL1_D4 43
+#define CLK_TOP_APLL1_D8 44
+#define CLK_TOP_APLL2_CK 45
+#define CLK_TOP_APLL2_D2 46
+#define CLK_TOP_APLL2_D4 47
+#define CLK_TOP_APLL2_D8 48
+#define CLK_TOP_TVDPLL_CK 49
+#define CLK_TOP_TVDPLL_D2 50
+#define CLK_TOP_TVDPLL_D4 51
+#define CLK_TOP_TVDPLL_D8 52
+#define CLK_TOP_TVDPLL_D16 53
+#define CLK_TOP_MMPLL_CK 54
+#define CLK_TOP_MMPLL_D4 55
+#define CLK_TOP_MMPLL_D4_D2 56
+#define CLK_TOP_MMPLL_D4_D4 57
+#define CLK_TOP_MMPLL_D5 58
+#define CLK_TOP_MMPLL_D5_D2 59
+#define CLK_TOP_MMPLL_D5_D4 60
+#define CLK_TOP_MMPLL_D6 61
+#define CLK_TOP_MMPLL_D7 62
+#define CLK_TOP_MFGPLL_CK 63
+#define CLK_TOP_MSDCPLL_CK 64
+#define CLK_TOP_MSDCPLL_D2 65
+#define CLK_TOP_MSDCPLL_D4 66
+#define CLK_TOP_MSDCPLL_D8 67
+#define CLK_TOP_MSDCPLL_D16 68
+#define CLK_TOP_AD_OSC_CK 69
+#define CLK_TOP_OSC_D2 70
+#define CLK_TOP_OSC_D4 71
+#define CLK_TOP_OSC_D8 72
+#define CLK_TOP_OSC_D16 73
+#define CLK_TOP_UNIVPLL 74
+#define CLK_TOP_UNIVPLL_D3_D16 75
+#define CLK_TOP_APLL12_DIV0 76
+#define CLK_TOP_APLL12_DIV1 77
+#define CLK_TOP_APLL12_DIV2 78
+#define CLK_TOP_APLL12_DIV3 79
+#define CLK_TOP_APLL12_DIV4 80
+#define CLK_TOP_APLL12_DIVB 81
+#define CLK_TOP_ARMPLL_DIV_PLL1 82
+#define CLK_TOP_ARMPLL_DIV_PLL2 83
+#define CLK_TOP_MUX_AXI 84
+#define CLK_TOP_MUX_MM 85
+#define CLK_TOP_MUX_IMG 86
+#define CLK_TOP_MUX_CAM 87
+#define CLK_TOP_MUX_DSP 88
+#define CLK_TOP_MUX_DSP1 89
+#define CLK_TOP_MUX_DSP2 90
+#define CLK_TOP_MUX_IPU_IF 91
+#define CLK_TOP_MUX_MFG 92
+#define CLK_TOP_MUX_F52M_MFG 93
+#define CLK_TOP_MUX_CAMTG 94
+#define CLK_TOP_MUX_CAMTG2 95
+#define CLK_TOP_MUX_CAMTG3 96
+#define CLK_TOP_MUX_CAMTG4 97
+#define CLK_TOP_MUX_UART 98
+#define CLK_TOP_MUX_SPI 99
+#define CLK_TOP_MUX_MSDC50_0_HCLK 100
+#define CLK_TOP_MUX_MSDC50_0 101
+#define CLK_TOP_MUX_MSDC30_1 102
+#define CLK_TOP_MUX_MSDC30_2 103
+#define CLK_TOP_MUX_AUDIO 104
+#define CLK_TOP_MUX_AUD_INTBUS 105
+#define CLK_TOP_MUX_PMICSPI 106
+#define CLK_TOP_MUX_FPWRAP_ULPOSC 107
+#define CLK_TOP_MUX_ATB 108
+#define CLK_TOP_MUX_SSPM 109
+#define CLK_TOP_MUX_DPI0 110
+#define CLK_TOP_MUX_SCAM 111
+#define CLK_TOP_MUX_DISP_PWM 112
+#define CLK_TOP_MUX_USB_TOP 113
+#define CLK_TOP_MUX_SSUSB_TOP_XHCI 114
+#define CLK_TOP_MUX_SPM 115
+#define CLK_TOP_MUX_I2C 116
+#define CLK_TOP_MUX_SCP 117
+#define CLK_TOP_MUX_SENINF 118
+#define CLK_TOP_MUX_DXCC 119
+#define CLK_TOP_MUX_AUD_ENG1 120
+#define CLK_TOP_MUX_AUD_ENG2 121
+#define CLK_TOP_MUX_FAES_UFSFDE 122
+#define CLK_TOP_MUX_FUFS 123
+#define CLK_TOP_MUX_AUD_1 124
+#define CLK_TOP_MUX_AUD_2 125
+#define CLK_TOP_MUX_APLL_I2S0 126
+#define CLK_TOP_MUX_APLL_I2S1 127
+#define CLK_TOP_MUX_APLL_I2S2 128
+#define CLK_TOP_MUX_APLL_I2S3 129
+#define CLK_TOP_MUX_APLL_I2S4 130
+#define CLK_TOP_MUX_APLL_I2S5 131
+#define CLK_TOP_NR_CLK 132
+
+/* INFRACFG_AO */
+#define CLK_INFRA_PMIC_TMR 0
+#define CLK_INFRA_PMIC_AP 1
+#define CLK_INFRA_PMIC_MD 2
+#define CLK_INFRA_PMIC_CONN 3
+#define CLK_INFRA_SCPSYS 4
+#define CLK_INFRA_SEJ 5
+#define CLK_INFRA_APXGPT 6
+#define CLK_INFRA_ICUSB 7
+#define CLK_INFRA_GCE 8
+#define CLK_INFRA_THERM 9
+#define CLK_INFRA_I2C0 10
+#define CLK_INFRA_I2C1 11
+#define CLK_INFRA_I2C2 12
+#define CLK_INFRA_I2C3 13
+#define CLK_INFRA_PWM_HCLK 14
+#define CLK_INFRA_PWM1 15
+#define CLK_INFRA_PWM2 16
+#define CLK_INFRA_PWM3 17
+#define CLK_INFRA_PWM4 18
+#define CLK_INFRA_PWM 19
+#define CLK_INFRA_UART0 20
+#define CLK_INFRA_UART1 21
+#define CLK_INFRA_UART2 22
+#define CLK_INFRA_UART3 23
+#define CLK_INFRA_GCE_26M 24
+#define CLK_INFRA_CQ_DMA_FPC 25
+#define CLK_INFRA_BTIF 26
+#define CLK_INFRA_SPI0 27
+#define CLK_INFRA_MSDC0 28
+#define CLK_INFRA_MSDC1 29
+#define CLK_INFRA_MSDC2 30
+#define CLK_INFRA_MSDC0_SCK 31
+#define CLK_INFRA_DVFSRC 32
+#define CLK_INFRA_GCPU 33
+#define CLK_INFRA_TRNG 34
+#define CLK_INFRA_AUXADC 35
+#define CLK_INFRA_CPUM 36
+#define CLK_INFRA_CCIF1_AP 37
+#define CLK_INFRA_CCIF1_MD 38
+#define CLK_INFRA_AUXADC_MD 39
+#define CLK_INFRA_MSDC1_SCK 40
+#define CLK_INFRA_MSDC2_SCK 41
+#define CLK_INFRA_AP_DMA 42
+#define CLK_INFRA_XIU 43
+#define CLK_INFRA_DEVICE_APC 44
+#define CLK_INFRA_CCIF_AP 45
+#define CLK_INFRA_DEBUGSYS 46
+#define CLK_INFRA_AUDIO 47
+#define CLK_INFRA_CCIF_MD 48
+#define CLK_INFRA_DXCC_SEC_CORE 49
+#define CLK_INFRA_DXCC_AO 50
+#define CLK_INFRA_DRAMC_F26M 51
+#define CLK_INFRA_IRTX 52
+#define CLK_INFRA_DISP_PWM 53
+#define CLK_INFRA_CLDMA_BCLK 54
+#define CLK_INFRA_AUDIO_26M_BCLK 55
+#define CLK_INFRA_SPI1 56
+#define CLK_INFRA_I2C4 57
+#define CLK_INFRA_MODEM_TEMP_SHARE 58
+#define CLK_INFRA_SPI2 59
+#define CLK_INFRA_SPI3 60
+#define CLK_INFRA_UNIPRO_SCK 61
+#define CLK_INFRA_UNIPRO_TICK 62
+#define CLK_INFRA_UFS_MP_SAP_BCLK 63
+#define CLK_INFRA_MD32_BCLK 64
+#define CLK_INFRA_SSPM 65
+#define CLK_INFRA_UNIPRO_MBIST 66
+#define CLK_INFRA_SSPM_BUS_HCLK 67
+#define CLK_INFRA_I2C5 68
+#define CLK_INFRA_I2C5_ARBITER 69
+#define CLK_INFRA_I2C5_IMM 70
+#define CLK_INFRA_I2C1_ARBITER 71
+#define CLK_INFRA_I2C1_IMM 72
+#define CLK_INFRA_I2C2_ARBITER 73
+#define CLK_INFRA_I2C2_IMM 74
+#define CLK_INFRA_SPI4 75
+#define CLK_INFRA_SPI5 76
+#define CLK_INFRA_CQ_DMA 77
+#define CLK_INFRA_UFS 78
+#define CLK_INFRA_AES_UFSFDE 79
+#define CLK_INFRA_UFS_TICK 80
+#define CLK_INFRA_MSDC0_SELF 81
+#define CLK_INFRA_MSDC1_SELF 82
+#define CLK_INFRA_MSDC2_SELF 83
+#define CLK_INFRA_SSPM_26M_SELF 84
+#define CLK_INFRA_SSPM_32K_SELF 85
+#define CLK_INFRA_UFS_AXI 86
+#define CLK_INFRA_I2C6 87
+#define CLK_INFRA_AP_MSDC0 88
+#define CLK_INFRA_MD_MSDC0 89
+#define CLK_INFRA_USB 90
+#define CLK_INFRA_DEVMPU_BCLK 91
+#define CLK_INFRA_CCIF2_AP 92
+#define CLK_INFRA_CCIF2_MD 93
+#define CLK_INFRA_CCIF3_AP 94
+#define CLK_INFRA_CCIF3_MD 95
+#define CLK_INFRA_SEJ_F13M 96
+#define CLK_INFRA_AES_BCLK 97
+#define CLK_INFRA_I2C7 98
+#define CLK_INFRA_I2C8 99
+#define CLK_INFRA_FBIST2FPC 100
+#define CLK_INFRA_NR_CLK 101
+
+/* MMSYS_CONFIG */
+#define CLK_MM_SMI_COMMON 0
+#define CLK_MM_SMI_LARB0 1
+#define CLK_MM_SMI_LARB1 2
+#define CLK_MM_GALS_COMM0 3
+#define CLK_MM_GALS_COMM1 4
+#define CLK_MM_GALS_CCU2MM 5
+#define CLK_MM_GALS_IPU12MM 6
+#define CLK_MM_GALS_IMG2MM 7
+#define CLK_MM_GALS_CAM2MM 8
+#define CLK_MM_GALS_IPU2MM 9
+#define CLK_MM_MDP_DL_TXCK 10
+#define CLK_MM_IPU_DL_TXCK 11
+#define CLK_MM_MDP_RDMA0 12
+#define CLK_MM_MDP_RDMA1 13
+#define CLK_MM_MDP_RSZ0 14
+#define CLK_MM_MDP_RSZ1 15
+#define CLK_MM_MDP_TDSHP 16
+#define CLK_MM_MDP_WROT0 17
+#define CLK_MM_FAKE_ENG 18
+#define CLK_MM_DISP_OVL0 19
+#define CLK_MM_DISP_OVL0_2L 20
+#define CLK_MM_DISP_OVL1_2L 21
+#define CLK_MM_DISP_RDMA0 22
+#define CLK_MM_DISP_RDMA1 23
+#define CLK_MM_DISP_WDMA0 24
+#define CLK_MM_DISP_COLOR0 25
+#define CLK_MM_DISP_CCORR0 26
+#define CLK_MM_DISP_AAL0 27
+#define CLK_MM_DISP_GAMMA0 28
+#define CLK_MM_DISP_DITHER0 29
+#define CLK_MM_DISP_SPLIT 30
+#define CLK_MM_DSI0_MM 31
+#define CLK_MM_DSI0_IF 32
+#define CLK_MM_DPI_MM 33
+#define CLK_MM_DPI_IF 34
+#define CLK_MM_FAKE_ENG2 35
+#define CLK_MM_MDP_DL_RX 36
+#define CLK_MM_IPU_DL_RX 37
+#define CLK_MM_26M 38
+#define CLK_MM_MMSYS_R2Y 39
+#define CLK_MM_DISP_RSZ 40
+#define CLK_MM_MDP_WDMA0 41
+#define CLK_MM_MDP_AAL 42
+#define CLK_MM_MDP_CCORR 43
+#define CLK_MM_DBI_MM 44
+#define CLK_MM_DBI_IF 45
+#define CLK_MM_NR_CLK 46
+
+/* MCUCFG */
+#define CLK_MCU_MP0_SEL 0
+#define CLK_MCU_MP2_SEL 1
+#define CLK_MCU_BUS_SEL 2
+#define CLK_MCU_NR_CLK 3
+
+#endif /* _DT_BINDINGS_CLK_MT8183_H */
diff --git a/include/dt-bindings/reset/ast2600-reset.h b/include/dt-bindings/reset/ast2600-reset.h
new file mode 100644
index 0000000..b6d0f79
--- /dev/null
+++ b/include/dt-bindings/reset/ast2600-reset.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+
+#ifndef _ABI_MACH_ASPEED_AST2600_RESET_H_
+#define _ABI_MACH_ASPEED_AST2600_RESET_H_
+
+#define ASPEED_RESET_FSI (59)
+#define ASPEED_RESET_RESERVED58 (58)
+#define ASPEED_RESET_RESERVED57 (57)
+#define ASPEED_RESET_SD (56)
+#define ASPEED_RESET_ADC (55)
+#define ASPEED_RESET_JTAG_MASTER2 (54)
+#define ASPEED_RESET_MAC4 (53)
+#define ASPEED_RESET_MAC3 (52)
+#define ASPEED_RESET_RESERVE51 (51)
+#define ASPEED_RESET_RESERVE50 (50)
+#define ASPEED_RESET_RESERVE49 (49)
+#define ASPEED_RESET_RESERVE48 (48)
+#define ASPEED_RESET_RESERVE47 (47)
+#define ASPEED_RESET_RESERVE46 (46)
+#define ASPEED_RESET_I3C5 (45)
+#define ASPEED_RESET_I3C4 (44)
+#define ASPEED_RESET_I3C3 (43)
+#define ASPEED_RESET_I3C2 (42)
+#define ASPEED_RESET_I3C1 (41)
+#define ASPEED_RESET_I3C0 (40)
+#define ASPEED_RESET_I3C_DMA (39)
+#define ASPEED_RESET_RESERVED38 (38)
+#define ASPEED_RESET_PWM (37)
+#define ASPEED_RESET_PECI (36)
+#define ASPEED_RESET_MII (35)
+#define ASPEED_RESET_I2C (34)
+#define ASPEED_RESET_RESERVED33 (33)
+#define ASPEED_RESET_LPC_ESPI (32)
+#define ASPEED_RESET_H2X (31)
+#define ASPEED_RESET_GP_MCU (30)
+#define ASPEED_RESET_DP_MCU (29)
+#define ASPEED_RESET_DP (28)
+#define ASPEED_RESET_RC_XDMA (27)
+#define ASPEED_RESET_GRAPHICS (26)
+#define ASPEED_RESET_DEV_XDMA (25)
+#define ASPEED_RESET_DEV_MCTP (24)
+#define ASPEED_RESET_RC_MCTP (23)
+#define ASPEED_RESET_JTAG_MASTER (22)
+#define ASPEED_RESET_PCIE_DEV_OE (21)
+#define ASPEED_RESET_PCIE_DEV_O (20)
+#define ASPEED_RESET_PCIE_RC_OE (19)
+#define ASPEED_RESET_PCIE_RC_O (18)
+#define ASPEED_RESET_RESERVED17 (17)
+#define ASPEED_RESET_EMMC (16)
+#define ASPEED_RESET_UHCI (15)
+#define ASPEED_RESET_EHCI_P1 (14)
+#define ASPEED_RESET_CRT (13)
+#define ASPEED_RESET_MAC2 (12)
+#define ASPEED_RESET_MAC1 (11)
+#define ASPEED_RESET_RESERVED10 (10)
+#define ASPEED_RESET_RVAS (9)
+#define ASPEED_RESET_PCI_VGA (8)
+#define ASPEED_RESET_2D (7)
+#define ASPEED_RESET_VIDEO (6)
+#define ASPEED_RESET_PCI_DP (5)
+#define ASPEED_RESET_HACE (4)
+#define ASPEED_RESET_EHCI_P2 (3)
+#define ASPEED_RESET_RESERVED2 (2)
+#define ASPEED_RESET_AHB (1)
+#define ASPEED_RESET_SDRAM (0)
+
+#endif /* _ABI_MACH_ASPEED_AST2600_RESET_H_ */
diff --git a/include/power/mp5416.h b/include/power/mp5416.h
new file mode 100644
index 0000000..dc096fe
--- /dev/null
+++ b/include/power/mp5416.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2020 Gateworks Corporation */
+
+#ifndef MP5416_H_
+#define MP5416_H_
+
+#define MP6416_REGULATOR_DRIVER "mp5416_regulator"
+
+enum {
+ MP5416_CTL0 = 0x00,
+ MP5416_CTL1 = 0x01,
+ MP5416_CTL2 = 0x02,
+ MP5416_ILIMIT = 0x03,
+ MP5416_VSET_SW1 = 0x04,
+ MP5416_VSET_SW2 = 0x05,
+ MP5416_VSET_SW3 = 0x06,
+ MP5416_VSET_SW4 = 0x07,
+ MP5416_VSET_LDO2 = 0x08,
+ MP5416_VSET_LDO3 = 0x09,
+ MP5416_VSET_LDO4 = 0x0a,
+ MP5416_VSET_LDO5 = 0x0b,
+ MP5416_STATUS1 = 0x0d,
+ MP5416_STATUS2 = 0x0e,
+ MP5416_STATUS3 = 0x0f,
+ MP5416_ID2 = 0x11,
+ MP5416_NUM_OF_REGS = 0x12,
+};
+
+#define MP5416_VSET_EN BIT(7)
+#define MP5416_VSET_SW1_GVAL(x) ((((x) & 0x7f) * 12500) + 600000)
+#define MP5416_VSET_SW2_GVAL(x) ((((x) & 0x7f) * 25000) + 800000)
+#define MP5416_VSET_SW3_GVAL(x) ((((x) & 0x7f) * 12500) + 600000)
+#define MP5416_VSET_SW4_GVAL(x) ((((x) & 0x7f) * 25000) + 800000)
+#define MP5416_VSET_LDO_GVAL(x) ((((x) & 0x7f) * 25000) + 800000)
+#define MP5416_VSET_LDO_SVAL(x) ((((x) & 0x7f) * 25000) + 800000)
+#define MP5416_VSET_SW1_SVAL(x) (((x) - 600000) / 12500)
+#define MP5416_VSET_SW2_SVAL(x) (((x) - 800000) / 25000)
+#define MP5416_VSET_SW3_SVAL(x) (((x) - 600000) / 12500)
+#define MP5416_VSET_SW4_SVAL(x) (((x) - 800000) / 25000)
+
+#endif
diff --git a/test/cmd/Makefile b/test/cmd/Makefile
index b2f71af..758bc14 100644
--- a/test/cmd/Makefile
+++ b/test/cmd/Makefile
@@ -4,4 +4,5 @@
obj-y += mem.o
obj-$(CONFIG_CMD_MEM_SEARCH) += mem_search.o
+obj-$(CONFIG_CMD_PWM) += pwm.o
obj-y += setexpr.o
diff --git a/test/cmd/pwm.c b/test/cmd/pwm.c
new file mode 100644
index 0000000..5343af8
--- /dev/null
+++ b/test/cmd/pwm.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test for pwm command
+ *
+ * Copyright 2020 SiFive, Inc
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <dm.h>
+#include <dm/test.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+/* Basic test of 'pwm' command */
+static int dm_test_pwm_cmd(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_PWM, 0, &dev));
+ ut_assertnonnull(dev);
+
+ ut_assertok(console_record_reset_enable());
+
+ /* pwm <invert> <pwm_dev_num> <channel> <polarity> */
+ ut_assertok(run_command("pwm invert 0 0 1", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("pwm invert 0 0 0", 0));
+ ut_assert_console_end();
+
+ /* pwm <config> <pwm_dev_num> <channel> <period_ns> <duty_ns> */
+ ut_assertok(run_command("pwm config 0 0 10 50", 0));
+ ut_assert_console_end();
+
+ /* pwm <enable/disable> <pwm_dev_num> <channel> */
+ ut_assertok(run_command("pwm enable 0 0", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("pwm disable 0 0", 0));
+ ut_assert_console_end();
+
+ return 0;
+}
+
+DM_TEST(dm_test_pwm_cmd, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT | UT_TESTF_CONSOLE_REC);
diff --git a/tools/mtk_image.c b/tools/mtk_image.c
index 2ca5194..bde1e5d 100644
--- a/tools/mtk_image.c
+++ b/tools/mtk_image.c
@@ -246,6 +246,7 @@
/* Image type selected by user */
static enum brlyt_img_type hdr_media;
static int use_lk_hdr;
+static bool is_arm64_image;
/* LK image name */
static char lk_name[32] = "U-Boot";
@@ -276,6 +277,7 @@
static const char *media = "";
static const char *nandinfo = "";
static const char *lk = "";
+ static const char *arm64_param = "";
key = buf;
while (key) {
@@ -323,6 +325,9 @@
if (!strcmp(key, "lkname"))
snprintf(lk_name, sizeof(lk_name), "%s", val);
+
+ if (!strcmp(key, "arm64"))
+ arm64_param = val;
}
if (next)
@@ -354,6 +359,9 @@
}
}
+ if (arm64_param && arm64_param[0] == '1')
+ is_arm64_image = true;
+
free(buf);
if (hdr_media == BRLYT_TYPE_INVALID) {
@@ -458,6 +466,9 @@
le32_to_cpu(gfh->file_info.load_addr) +
le32_to_cpu(gfh->file_info.jump_offset));
+ if (print)
+ printf("Architecture: %s\n", is_arm64_image ? "ARM64" : "ARM");
+
return 0;
}
@@ -523,6 +534,9 @@
le32_to_cpu(gfh->file_info.load_addr) +
le32_to_cpu(gfh->file_info.jump_offset));
+ if (print)
+ printf("Architecture: %s\n", is_arm64_image ? "ARM64" : "ARM");
+
return 0;
}
@@ -581,6 +595,8 @@
static void put_ghf_header(struct gfh_header *gfh, int file_size,
int dev_hdr_size, int load_addr, int flash_type)
{
+ uint32_t cfg_bits;
+
memset(gfh, 0, sizeof(struct gfh_header));
/* GFH_FILE_INFO header */
@@ -608,11 +624,15 @@
/* GFH_BROM_CFG header */
put_ghf_common_header(&gfh->brom_cfg.gfh, sizeof(gfh->brom_cfg),
GFH_TYPE_BROM_CFG, 3);
- gfh->brom_cfg.cfg_bits = cpu_to_le32(
- GFH_BROM_CFG_USBDL_AUTO_DETECT_DIS |
- GFH_BROM_CFG_USBDL_BY_KCOL0_TIMEOUT_EN |
- GFH_BROM_CFG_USBDL_BY_FLAG_TIMEOUT_EN);
+ cfg_bits = GFH_BROM_CFG_USBDL_AUTO_DETECT_DIS |
+ GFH_BROM_CFG_USBDL_BY_KCOL0_TIMEOUT_EN |
+ GFH_BROM_CFG_USBDL_BY_FLAG_TIMEOUT_EN;
gfh->brom_cfg.usbdl_by_kcol0_timeout_ms = cpu_to_le32(5000);
+ if (is_arm64_image) {
+ gfh->brom_cfg.jump_bl_arm64 = GFH_BROM_CFG_JUMP_BL_ARM64;
+ cfg_bits |= GFH_BROM_CFG_JUMP_BL_ARM64_EN;
+ }
+ gfh->brom_cfg.cfg_bits = cpu_to_le32(cfg_bits);
/* GFH_BL_SEC_KEY header */
put_ghf_common_header(&gfh->bl_sec_key.gfh, sizeof(gfh->bl_sec_key),
diff --git a/tools/mtk_image.h b/tools/mtk_image.h
index 4e78b3d..7dda71c 100644
--- a/tools/mtk_image.h
+++ b/tools/mtk_image.h
@@ -136,7 +136,9 @@
struct gfh_common_header gfh;
uint32_t cfg_bits;
uint32_t usbdl_by_auto_detect_timeout_ms;
- uint8_t unused[0x48];
+ uint8_t unused[0x45];
+ uint8_t jump_bl_arm64;
+ uint8_t unused2[2];
uint32_t usbdl_by_kcol0_timeout_ms;
uint32_t usbdl_by_flag_timeout_ms;
uint32_t pad;
@@ -146,6 +148,8 @@
#define GFH_BROM_CFG_USBDL_AUTO_DETECT_DIS 0x10
#define GFH_BROM_CFG_USBDL_BY_KCOL0_TIMEOUT_EN 0x80
#define GFH_BROM_CFG_USBDL_BY_FLAG_TIMEOUT_EN 0x100
+#define GFH_BROM_CFG_JUMP_BL_ARM64_EN 0x1000
+#define GFH_BROM_CFG_JUMP_BL_ARM64 0x64
struct gfh_bl_sec_key {
struct gfh_common_header gfh;